diff options
Diffstat (limited to 'src/arm/openwrt_demo/1_buildimage/resources/strongswan/charon.conf')
| -rw-r--r-- | src/arm/openwrt_demo/1_buildimage/resources/strongswan/charon.conf | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/src/arm/openwrt_demo/1_buildimage/resources/strongswan/charon.conf b/src/arm/openwrt_demo/1_buildimage/resources/strongswan/charon.conf new file mode 100644 index 0000000..5cab2b1 --- /dev/null +++ b/src/arm/openwrt_demo/1_buildimage/resources/strongswan/charon.conf @@ -0,0 +1,281 @@ +# Options for the charon IKE daemon. +charon { + + # Maximum number of half-open IKE_SAs for a single peer IP. + # block_threshold = 5 + + # Whether relations in validated certificate chains should be cached in + # memory. + # cert_cache = yes + + # Send Cisco Unity vendor ID payload (IKEv1 only). + # cisco_unity = no + + # Close the IKE_SA if setup of the CHILD_SA along with IKE_AUTH failed. + # close_ike_on_child_failure = no + + # Number of half-open IKE_SAs that activate the cookie mechanism. + # cookie_threshold = 10 + + # Use ANSI X9.42 DH exponent size or optimum size matched to cryptographic + # strength. + # dh_exponent_ansi_x9_42 = yes + + # DNS server assigned to peer via configuration payload (CP). + # dns1 = + + # DNS server assigned to peer via configuration payload (CP). + # dns2 = + + # Enable Denial of Service protection using cookies and aggressiveness + # checks. + # dos_protection = yes + + # Compliance with the errata for RFC 4753. + # ecp_x_coordinate_only = yes + + # Free objects during authentication (might conflict with plugins). + # flush_auth_cfg = no + + # Maximum size (in bytes) of a sent fragment when using the proprietary + # IKEv1 fragmentation extension. + # fragment_size = 512 + + # Name of the group the daemon changes to after startup. + # group = + + # Timeout in seconds for connecting IKE_SAs (also see IKE_SA_INIT DROPPING). + # half_open_timeout = 30 + + # Enable hash and URL support. + # hash_and_url = no + + # Allow IKEv1 Aggressive Mode with pre-shared keys as responder. + # i_dont_care_about_security_and_use_aggressive_mode_psk = no + + # A space-separated list of routing tables to be excluded from route + # lookups. + # ignore_routing_tables = + + # Maximum number of IKE_SAs that can be established at the same time before + # new connection attempts are blocked. + # ikesa_limit = 0 + + # Number of exclusively locked segments in the hash table. + # ikesa_table_segments = 1 + + # Size of the IKE_SA hash table. + # ikesa_table_size = 1 + + # Whether to close IKE_SA if the only CHILD_SA closed due to inactivity. + # inactivity_close_ike = no + + # Limit new connections based on the current number of half open IKE_SAs, + # see IKE_SA_INIT DROPPING in strongswan.conf(5). + # init_limit_half_open = 0 + + # Limit new connections based on the number of queued jobs. + # init_limit_job_load = 0 + + # Causes charon daemon to ignore IKE initiation requests. + # initiator_only = no + + # Install routes into a separate routing table for established IPsec + # tunnels. + # install_routes = yes + + # Install virtual IP addresses. + # install_virtual_ip = yes + + # The name of the interface on which virtual IP addresses should be + # installed. + # install_virtual_ip_on = + + # Check daemon, libstrongswan and plugin integrity at startup. + # integrity_test = no + + # A comma-separated list of network interfaces that should be ignored, if + # interfaces_use is specified this option has no effect. + # interfaces_ignore = + + # A comma-separated list of network interfaces that should be used by + # charon. All other interfaces are ignored. + # interfaces_use = + + # NAT keep alive interval. + # keep_alive = 20s + + # Plugins to load in the IKE daemon charon. + # load = + + # Determine plugins to load via each plugin's load option. + # load_modular = no + + # Maximum packet size accepted by charon. + # max_packet = 10000 + + # Enable multiple authentication exchanges (RFC 4739). + # multiple_authentication = yes + + # WINS servers assigned to peer via configuration payload (CP). + # nbns1 = + + # WINS servers assigned to peer via configuration payload (CP). + # nbns2 = + + # UDP port used locally. If set to 0 a random port will be allocated. + # port = 500 + + # UDP port used locally in case of NAT-T. If set to 0 a random port will be + # allocated. Has to be different from charon.port, otherwise a random port + # will be allocated. + # port_nat_t = 4500 + + # Process RTM_NEWROUTE and RTM_DELROUTE events. + # process_route = yes + + # Delay in ms for receiving packets, to simulate larger RTT. + # receive_delay = 0 + + # Delay request messages. + # receive_delay_request = yes + + # Delay response messages. + # receive_delay_response = yes + + # Specific IKEv2 message type to delay, 0 for any. + # receive_delay_type = 0 + + # Size of the AH/ESP replay window, in packets. + # replay_window = 32 + + # Base to use for calculating exponential back off, see IKEv2 RETRANSMISSION + # in strongswan.conf(5). + # retransmit_base = 1.8 + + # Timeout in seconds before sending first retransmit. + # retransmit_timeout = 4.0 + + # Number of times to retransmit a packet before giving up. + # retransmit_tries = 5 + + # Interval to use when retrying to initiate an IKE_SA (e.g. if DNS + # resolution failed), 0 to disable retries. + # retry_initiate_interval = 0 + + # Initiate CHILD_SA within existing IKE_SAs. + # reuse_ikesa = yes + + # Numerical routing table to install routes to. + # routing_table = + + # Priority of the routing table. + # routing_table_prio = + + # Delay in ms for sending packets, to simulate larger RTT. + # send_delay = 0 + + # Delay request messages. + # send_delay_request = yes + + # Delay response messages. + # send_delay_response = yes + + # Specific IKEv2 message type to delay, 0 for any. + # send_delay_type = 0 + + # Send strongSwan vendor ID payload + # send_vendor_id = no + + # Number of worker threads in charon. + # threads = 16 + + # Name of the user the daemon changes to after startup. + # user = + + crypto_test { + + # Benchmark crypto algorithms and order them by efficiency. + # bench = no + + # Buffer size used for crypto benchmark. + # bench_size = 1024 + + # Number of iterations to test each algorithm. + # bench_time = 50 + + # Test crypto algorithms during registration (requires test vectors + # provided by the test-vectors plugin). + # on_add = no + + # Test crypto algorithms on each crypto primitive instantiation. + # on_create = no + + # Strictly require at least one test vector to enable an algorithm. + # required = no + + # Whether to test RNG with TRUE quality; requires a lot of entropy. + # rng_true = no + + } + + host_resolver { + + # Maximum number of concurrent resolver threads (they are terminated if + # unused). + # max_threads = 3 + + # Minimum number of resolver threads to keep around. + # min_threads = 0 + + } + + leak_detective { + + # Includes source file names and line numbers in leak detective output. + # detailed = yes + + # Threshold in bytes for leaks to be reported (0 to report all). + # usage_threshold = 10240 + + # Threshold in number of allocations for leaks to be reported (0 to + # report all). + # usage_threshold_count = 0 + + } + + processor { + + # Section to configure the number of reserved threads per priority class + # see JOB PRIORITY MANAGEMENT in strongswan.conf(5). + priority_threads { + + } + + } + + tls { + + # List of TLS encryption ciphers. + # cipher = + + # List of TLS key exchange methods. + # key_exchange = + + # List of TLS MAC algorithms. + # mac = + + # List of TLS cipher suites. + # suites = + + } + + x509 { + + # Discard certificates with unsupported or unknown critical extensions. + # enforce_critical = yes + + } + +} + |