Merge "Add compass-deck"

7 files changed, 291 insertions, 0 deletions

diff --git a/compass-deck/misc/apache/README b/compass-deck/misc/apache/README
new file mode 100644
index 0000000..73b883c
--- /dev/null
+++ b/compass-deck/misc/apache/README
@@ -0,0 +1,15 @@
+Apache2 is supported. mod_wsgi is required to run Compass web app. 
+
+On Ubuntu systems (e.g, 12.04), you can install mod_wsgi with
+  sudo aptitude install libapache2-mod-wsgi
+
+The current wsgi config file assumes that the environment variable
+ODS_PROJECT_HOME is set in /etc/apache2/envvars file.You also need
+to make sure mod_rewrite module in apache is enabled. If not, you
+need to run the command: sudo a2enmod rewrite
+
+We also assume that the server host name is ods-server.us.huawei.com.
+
+Restart Apache to get mod_wsgi to work.
+
+sudo service apache2 restart
diff --git a/compass-deck/misc/apache/cobbler_web.conf b/compass-deck/misc/apache/cobbler_web.conf
new file mode 100644
index 0000000..f03d4fe
--- /dev/null
+++ b/compass-deck/misc/apache/cobbler_web.conf
@@ -0,0 +1,10 @@
+# This configuration file enables the cobbler web
+# interface (django version)
+
+# Force everything to go to https
+RewriteEngine on
+RewriteCond %{HTTPS} off
+RewriteCond %{REQUEST_URI} ^/cobbler_web
+# RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
+
+WSGIScriptAlias /cobbler_web /usr/share/cobbler/web/cobbler.wsgi
diff --git a/compass-deck/misc/apache/http_pip.conf b/compass-deck/misc/apache/http_pip.conf
new file mode 100644
index 0000000..9a61de2
--- /dev/null
+++ b/compass-deck/misc/apache/http_pip.conf
@@ -0,0 +1,9 @@
+Alias /pip /var/www/pip
+
+<Directory "/var/www/pip">
+    SetEnv VIRTUALENV
+    Options Indexes FollowSymLinks
+    Order allow,deny
+    Allow from all
+</Directory>
+
diff --git a/compass-deck/misc/apache/images.conf b/compass-deck/misc/apache/images.conf
new file mode 100644
index 0000000..d38986a
--- /dev/null
+++ b/compass-deck/misc/apache/images.conf
@@ -0,0 +1,9 @@
+Alias /image /var/www/guestimg
+
+<Directory "/var/www/guestimg">
+    SetEnv VIRTUALENV
+    Options Indexes FollowSymLinks
+    Order allow,deny
+    Allow from all
+</Directory>
+
diff --git a/compass-deck/misc/apache/ods-server.conf b/compass-deck/misc/apache/ods-server.conf
new file mode 100644
index 0000000..a773777
--- /dev/null
+++ b/compass-deck/misc/apache/ods-server.conf
@@ -0,0 +1,18 @@
+# Apache config for ods server
+#
+# Specify python path if you use virtualenv
+
+WSGIDaemonProcess compass threads=4 display-name=%{GROUP}
+WSGIProcessGroup compass
+WSGIScriptAlias /api /var/www/compass/compass.wsgi
+WSGISocketPrefix /var/run/wsgi
+
+<VirtualHost *:80>
+  DocumentRoot /var/www/compass_web/v2.5
+
+  <Directory "/var/www/compass_web/v2.5">
+    Options Indexes FollowSymLinks
+    Order allow,deny
+    Allow from all
+  </Directory>
+</VirtualHost>
diff --git a/compass-deck/misc/apache/packages.conf b/compass-deck/misc/apache/packages.conf
new file mode 100644
index 0000000..0934fcd
--- /dev/null
+++ b/compass-deck/misc/apache/packages.conf
@@ -0,0 +1,9 @@
+Alias /packages /var/www/packages
+
+<Directory "/var/www/packages">
+    SetEnv VIRTUALENV
+    Options Indexes FollowSymLinks
+    Order allow,deny
+    Allow from all
+</Directory>
+
diff --git a/compass-deck/misc/apache/ssl.conf b/compass-deck/misc/apache/ssl.conf
new file mode 100644
index 0000000..703f97d
--- /dev/null
+++ b/compass-deck/misc/apache/ssl.conf
@@ -0,0 +1,221 @@
+#
+# This is the Apache server configuration file providing SSL support.
+# It contains the configuration directives to instruct the server how to
+# serve pages over an https connection. For detailing information about these 
+# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
+# 
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+
+LoadModule ssl_module modules/mod_ssl.so
+
+#
+# When we also provide SSL we have to listen to the 
+# the HTTPS port in addition.
+#
+Listen 445
+
+##
+##  SSL Global Context
+##
+##  All SSL configuration in this context applies both to
+##  the main server and all SSL-enabled virtual hosts.
+##
+
+#   Pass Phrase Dialog:
+#   Configure the pass phrase gathering process.
+#   The filtering dialog program (`builtin' is a internal
+#   terminal dialog) has to provide the pass phrase on stdout.
+SSLPassPhraseDialog  builtin
+
+#   Inter-Process Session Cache:
+#   Configure the SSL Session Cache: First the mechanism 
+#   to use and second the expiring timeout (in seconds).
+SSLSessionCache         shmcb:/var/cache/mod_ssl/scache(512000)
+SSLSessionCacheTimeout  300
+
+#   Semaphore:
+#   Configure the path to the mutual exclusion semaphore the
+#   SSL engine uses internally for inter-process synchronization. 
+
+#   Pseudo Random Number Generator (PRNG):
+#   Configure one or more sources to seed the PRNG of the 
+#   SSL library. The seed data should be of good random quality.
+#   WARNING! On some platforms /dev/random blocks if not enough entropy
+#   is available. This means you then cannot use the /dev/random device
+#   because it would lead to very long connection times (as long as
+#   it requires to make more entropy available). But usually those
+#   platforms additionally provide a /dev/urandom device which doesn't
+#   block. So, if available, use this one instead. Read the mod_ssl User
+#   Manual for more details.
+SSLRandomSeed startup file:/dev/urandom  256
+SSLRandomSeed connect builtin
+#SSLRandomSeed startup file:/dev/random  512
+#SSLRandomSeed connect file:/dev/random  512
+#SSLRandomSeed connect file:/dev/urandom 512
+
+#
+# Use "SSLCryptoDevice" to enable any supported hardware
+# accelerators. Use "openssl engine -v" to list supported
+# engine names.  NOTE: If you enable an accelerator and the
+# server does not start, consult the error logs and ensure
+# your accelerator is functioning properly. 
+#
+SSLCryptoDevice builtin
+#SSLCryptoDevice ubsec
+
+##
+## SSL Virtual Host Context
+##
+
+<VirtualHost _default_:445>
+
+# General setup for the virtual host, inherited from global configuration
+#DocumentRoot "/var/www/html"
+#ServerName www.example.com:443
+
+# Use separate log files for the SSL virtual host; note that LogLevel
+# is not inherited from httpd.conf.
+ErrorLog logs/ssl_error_log
+TransferLog logs/ssl_access_log
+LogLevel warn
+
+#   SSL Engine Switch:
+#   Enable/Disable SSL for this virtual host.
+SSLEngine on
+
+#   SSL Protocol support:
+# List the enable protocol levels with which clients will be able to
+# connect.  Disable SSLv2 access by default:
+SSLProtocol all -SSLv2
+
+#   SSL Cipher Suite:
+# List the ciphers that the client is permitted to negotiate.
+# See the mod_ssl documentation for a complete list.
+SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW
+
+#   Server Certificate:
+# Point SSLCertificateFile at a PEM encoded certificate.  If
+# the certificate is encrypted, then you will be prompted for a
+# pass phrase.  Note that a kill -HUP will prompt again.  A new
+# certificate can be generated using the genkey(1) command.
+SSLCertificateFile /etc/pki/tls/certs/localhost.crt
+
+#   Server Private Key:
+#   If the key is not combined with the certificate, use this
+#   directive to point at the key file.  Keep in mind that if
+#   you've both a RSA and a DSA private key you can configure
+#   both in parallel (to also allow the use of DSA ciphers, etc.)
+SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
+
+#   Server Certificate Chain:
+#   Point SSLCertificateChainFile at a file containing the
+#   concatenation of PEM encoded CA certificates which form the
+#   certificate chain for the server certificate. Alternatively
+#   the referenced file can be the same as SSLCertificateFile
+#   when the CA certificates are directly appended to the server
+#   certificate for convinience.
+#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
+
+#   Certificate Authority (CA):
+#   Set the CA certificate verification path where to find CA
+#   certificates for client authentication or alternatively one
+#   huge file containing all of them (file must be PEM encoded)
+#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
+
+#   Client Authentication (Type):
+#   Client certificate verification type and depth.  Types are
+#   none, optional, require and optional_no_ca.  Depth is a
+#   number which specifies how deeply to verify the certificate
+#   issuer chain before deciding the certificate is not valid.
+#SSLVerifyClient require
+#SSLVerifyDepth  10
+
+#   Access Control:
+#   With SSLRequire you can do per-directory access control based
+#   on arbitrary complex boolean expressions containing server
+#   variable checks and other lookup directives.  The syntax is a
+#   mixture between C and Perl.  See the mod_ssl documentation
+#   for more details.
+#<Location />
+#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
+#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
+#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
+#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
+#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
+#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
+#</Location>
+
+#   SSL Engine Options:
+#   Set various options for the SSL engine.
+#   o FakeBasicAuth:
+#     Translate the client X.509 into a Basic Authorisation.  This means that
+#     the standard Auth/DBMAuth methods can be used for access control.  The
+#     user name is the `one line' version of the client's X.509 certificate.
+#     Note that no password is obtained from the user. Every entry in the user
+#     file needs this password: `xxj31ZMTZzkVA'.
+#   o ExportCertData:
+#     This exports two additional environment variables: SSL_CLIENT_CERT and
+#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+#     server (always existing) and the client (only existing when client
+#     authentication is used). This can be used to import the certificates
+#     into CGI scripts.
+#   o StdEnvVars:
+#     This exports the standard SSL/TLS related `SSL_*' environment variables.
+#     Per default this exportation is switched off for performance reasons,
+#     because the extraction step is an expensive operation and is usually
+#     useless for serving static content. So one usually enables the
+#     exportation for CGI and SSI requests only.
+#   o StrictRequire:
+#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
+#     under a "Satisfy any" situation, i.e. when it applies access is denied
+#     and no other module can change it.
+#   o OptRenegotiate:
+#     This enables optimized SSL connection renegotiation handling when SSL
+#     directives are used in per-directory context. 
+#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+<Files ~ "\.(cgi|shtml|phtml|php3?)$">
+    SSLOptions +StdEnvVars
+</Files>
+<Directory "/var/www/cgi-bin">
+    SSLOptions +StdEnvVars
+</Directory>
+
+#   SSL Protocol Adjustments:
+#   The safe and default but still SSL/TLS standard compliant shutdown
+#   approach is that mod_ssl sends the close notify alert but doesn't wait for
+#   the close notify alert from client. When you need a different shutdown
+#   approach you can use one of the following variables:
+#   o ssl-unclean-shutdown:
+#     This forces an unclean shutdown when the connection is closed, i.e. no
+#     SSL close notify alert is send or allowed to received.  This violates
+#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
+#     this when you receive I/O errors because of the standard approach where
+#     mod_ssl sends the close notify alert.
+#   o ssl-accurate-shutdown:
+#     This forces an accurate shutdown when the connection is closed, i.e. a
+#     SSL close notify alert is send and mod_ssl waits for the close notify
+#     alert of the client. This is 100% SSL/TLS standard compliant, but in
+#     practice often causes hanging connections with brain-dead browsers. Use
+#     this only for browsers where you know that their SSL implementation
+#     works correctly. 
+#   Notice: Most problems of broken clients are also related to the HTTP
+#   keep-alive facility, so you usually additionally want to disable
+#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
+#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
+#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+#   "force-response-1.0" for this.
+SetEnvIf User-Agent ".*MSIE.*" \
+         nokeepalive ssl-unclean-shutdown \
+         downgrade-1.0 force-response-1.0
+
+#   Per-Server Logging:
+#   The home of a custom SSL log file. Use this when you want a
+#   compact non-error SSL logfile on a virtual host basis.
+CustomLog logs/ssl_request_log \
+          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
+
+</VirtualHost>                                  
+