aboutsummaryrefslogtreecommitdiffstats
path: root/docs/release
diff options
context:
space:
mode:
Diffstat (limited to 'docs/release')
-rw-r--r--docs/release/userguide/index.rst4
-rw-r--r--docs/release/userguide/installguide.docker.rst (renamed from docs/release/userguide/docker.userguide.rst)339
-rw-r--r--docs/release/userguide/installguide.oneclick.rst331
3 files changed, 348 insertions, 326 deletions
diff --git a/docs/release/userguide/index.rst b/docs/release/userguide/index.rst
index e880f3a9..673d6c12 100644
--- a/docs/release/userguide/index.rst
+++ b/docs/release/userguide/index.rst
@@ -19,7 +19,9 @@ OPNFV Barometer User Guide
feature.userguide
collectd.ves.userguide.rst
- docker.userguide.rst
+ installguide.docker.rst
+ installguide.oneclick.rst
+
.. The feature.userguide.rst file should contain the text for this document
.. additional documents can be added to this directory and added in the right order
.. to this file as a list below.
diff --git a/docs/release/userguide/docker.userguide.rst b/docs/release/userguide/installguide.docker.rst
index d0916cfa..7312a9f7 100644
--- a/docs/release/userguide/docker.userguide.rst
+++ b/docs/release/userguide/installguide.docker.rst
@@ -3,9 +3,9 @@
.. (c) <optionally add copywriters name>
.. _barometer-docker-userguide:
-===================================
-OPNFV Barometer Docker User Guide
-===================================
+====================================
+OPNFV Barometer Docker Install Guide
+====================================
.. contents::
:depth: 3
@@ -31,6 +31,8 @@ For steps to build and run VES and Kafka images please see section `Build and Ru
For overview of running VES application with Kafka please see the :ref:`VES Application User Guide <barometer-ves-userguide>`
+For an alternative installation method using ansible, please see the :ref:`Barometer One Click Install Guide <barometer-oneclick-userguide>`.
+
Barometer Docker Images Description
-----------------------------------
@@ -94,319 +96,6 @@ Kafka recieves and stores metrics recieved from Collectd. VES application pulls
which it normalizes into VES format for sending to a VES collector. Please see details in
:ref:`VES Application User Guide <barometer-ves-userguide>`
-One Click Install with Ansible
-------------------------------
-
-Proxy for package manager on host
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. note::
- This step has to be performed only if host is behind HTTP/HTTPS proxy
-
-Proxy URL have to be set in dedicated config file
-
-1. CentOS - /etc/yum.conf
-
-.. code:: bash
-
- proxy=http://your.proxy.domain:1234
-
-2. Ubuntu - /etc/apt/apt.conf
-
-.. code:: bash
-
- Acquire::http::Proxy "http://your.proxy.domain:1234"
-
-After update of config file, apt mirrors have to be updated via 'apt-get update'
-
-.. code:: bash
-
- $ sudo apt-get update
-
-Proxy environment variables(for docker and pip)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. note::
- This step has to be performed only if host is behind HTTP/HTTPS proxy
-
-Configuring proxy for packaging system is not enough, also some proxy
-environment variables have to be set in the system before ansible scripts
-can be started.
-Barometer configures docker proxy automatically via ansible task as a part
-of 'one click install' process - user only has to provide proxy URL using common
-shell environment variables and ansible will automatically configure proxies
-for docker(to be able to fetch barometer images). Another component used by
-ansible (e.g. pip is used for downloading python dependencies) will also benefit
-from setting proxy variables properly in the system.
-
-Proxy variables used by ansible One Click Install:
- * http_proxy
- * https_proxy
- * ftp_proxy
- * no_proxy
-
-Variables mentioned above have to be visible for superuser (because most
-actions involving ansible-barometer installation require root privileges).
-Proxy variables are commonly defined in '/etc/environment' file (but any other
-place is good as long as variables can be seen by commands using 'su').
-
-Sample proxy configuration in /etc/environment:
-
-.. code:: bash
-
- http_proxy=http://your.proxy.domain:1234
- https_proxy=http://your.proxy.domain:1234
- ftp_proxy=http://your.proxy.domain:1234
- no_proxy=localhost
-
-Install Ansible
-^^^^^^^^^^^^^^^
-.. note::
- * sudo permissions or root access are required to install ansible.
- * ansible version needs to be 2.4+, because usage of import/include statements
-
-The following steps have been verified with Ansible 2.6.3 on Ubuntu 16.04 and 18.04.
-To install Ansible 2.6.3 on Ubuntu:
-
-.. code:: bash
-
- $ sudo apt-get install python
- $ sudo apt-get install python-pip
- $ sudo -H pip install 'ansible==2.6.3'
-
-The following steps have been verified with Ansible 2.6.3 on Centos 7.5.
-To install Ansible 2.6.3 on Centos:
-
-.. code:: bash
-
- $ sudo yum install python
- $ sudo yum install epel-release
- $ sudo yum install python-pip
- $ sudo -H pip install 'ansible==2.6.3'
- $ sudo yum install git
-
-.. note::
- When using multi-node-setup, please make sure that 'python' package is
- installed on all of the target nodes (ansible during 'Gathering facts'
- phase is using python2 and it may not be installed by default on some
- distributions - e.g. on Ubuntu 16.04 it has to be installed manually)
-
-Clone barometer repo
-^^^^^^^^^^^^^^^^^^^^
-
-.. code:: bash
-
- $ git clone https://gerrit.opnfv.org/gerrit/barometer
- $ cd barometer/docker/ansible
-
-Edit inventory file
-^^^^^^^^^^^^^^^^^^^
-Edit inventory file and add hosts: $barometer_dir/docker/ansible/default.inv
-
-.. code:: bash
-
- [collectd_hosts]
- localhost
-
- [collectd_hosts:vars]
- install_mcelog=true
- insert_ipmi_modules=true
-
- [influxdb_hosts]
- localhost
-
- [grafana_hosts]
- localhost
-
- [prometheus_hosts]
- #localhost
-
- [zookeeper_hosts]
- #NOTE: currently one zookeeper host is supported
- #hostname
-
- [kafka_hosts]
- #hostname
-
- [ves_hosts]
- #hostname
-
-Change localhost to different hosts where neccessary.
-Hosts for influxdb and grafana are required only for collectd_service.yml.
-Hosts for zookeeper, kafka and ves are required only for collectd_ves.yml.
-
-.. note::
- Zookeeper, Kafka and VES need to be on the same host, there is no
- support for multi node setup.
-
-To change host for kafka edit kafka_ip_addr in ./roles/config_files/vars/main.yml.
-
-Additional plugin dependencies
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-By default ansible will try to fulfill dependencies for mcelog and ipmi plugin.
-For mcelog plugin it installs mcelog daemon. For ipmi it tries to insert ipmi_devintf
-and ipmi_si kernel modules.
-This can be changed in inventory file with use of variables install_mcelog
-and insert_ipmi_modules, both variables are independent:
-
-.. code:: bash
-
- [collectd_hosts:vars]
- install_mcelog=false
- insert_ipmi_modules=false
-
-.. note::
- On Ubuntu 18.04 the deb package for mcelog daemon is not available in official
- Ubuntu repository. In that case ansible scripts will try to download, make and
- install the daemon from mcelog git repository.
-
-Configure ssh keys
-^^^^^^^^^^^^^^^^^^
-
-Generate ssh keys if not present, otherwise move onto next step.
-
-.. code:: bash
-
- $ sudo ssh-keygen
-
-Copy ssh key to all target hosts. It requires to provide root password.
-The example is for localhost.
-
-.. code:: bash
-
- $ sudo -i
- $ ssh-copy-id root@localhost
-
-Verify that key is added and password is not required to connect.
-
-.. code:: bash
-
- $ sudo ssh root@localhost
-
-.. note::
- Keys should be added to every target host and [localhost] is only used as an
- example. For multinode installation keys need to be copied for each node:
- [collectd_hostname], [influxdb_hostname] etc.
-
-Download and run Collectd+Influxdb+Grafana containers
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The One Click installation features easy and scalable deployment of Collectd,
-Influxdb and Grafana containers using Ansible playbook. The following steps goes
-through more details.
-
-.. code:: bash
-
- $ sudo -H ansible-playbook -i default.inv collectd_service.yml
-
-Check the three containers are running, the output of docker ps should be similar to:
-
-.. code:: bash
-
- $ sudo docker ps
- CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
- a033aeea180d opnfv/barometer-grafana "/run.sh" 9 days ago Up 7 minutes bar-grafana
- 1bca2e4562ab opnfv/barometer-influxdb "/entrypoint.sh in..." 9 days ago Up 7 minutes bar-influxdb
- daeeb68ad1d5 opnfv/barometer-collectd "/run_collectd.sh ..." 9 days ago Up 7 minutes bar-collectd
-
-To make some changes when a container is running run:
-
-.. code:: bash
-
- $ sudo docker exec -ti <CONTAINER ID> /bin/bash
-
-Connect to <host_ip>:3000 with a browser and log into Grafana: admin/admin.
-For short introduction please see the:
-`Grafana guide <http://docs.grafana.org/guides/getting_started/>`_.
-
-The collectd configuration files can be accessed directly on target system in '/opt/collectd/etc/collectd.conf.d'.
-It can be used for manual changes or enable/disable plugins. If configuration has been modified it is required to
-restart collectd:
-
-.. code:: bash
-
- $ sudo docker restart bar-collectd
-
-Download and run collectd+kafka+ves containers
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-.. code:: bash
-
- $ sudo ansible-playbook -i default.inv collectd_ves.yml
-
-Check the containers are running, the output of docker ps should be similar to:
-
-.. code:: bash
-
- $ sudo docker ps
- CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
- 29035be2dab5 zookeeper:3.4.11 "/docker-entrypoint._" 7 minutes ago Up 7 minutes bar-zookeeper
- eb8bba3c0b76 opnfv/barometer-ves "./start_ves_app.s..." 6 minutes ago Up 6 minutes bar-ves
- 86702a96a68c opnfv/barometer-kafka "/src/start_kafka.sh" 6 minutes ago Up 6 minutes bar-kafka
- daeeb68ad1d5 opnfv/barometer-collectd "/run_collectd.sh ..." 6 minutes ago Up 6 minutes bar-collectd
-
-
-To make some changes when a container is running run:
-
-.. code:: bash
-
- $ sudo docker exec -ti <CONTAINER ID> /bin/bash
-
-List of default plugins for collectd container
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. note::
- The dpdk plugins dpdkevents and dpdkstat were tested with DPDK v16.11.
-
-By default the collectd is started with default configuration which includes the followin plugins:
- * csv, contextswitch, cpu, cpufreq, df, disk, ethstat, ipc, irq, load, memory, numa, processes,
- swap, turbostat, uuid, uptime, exec, hugepages, intel_pmu, ipmi, write_kafka, logfile, mcelog,
- network, intel_rdt, rrdtool, snmp_agent, syslog, virt, ovs_stats, ovs_events, dpdkevents,
- dpdkstat
-
-Some of the plugins are loaded depending on specific system requirements and can be omitted if
-dependency is not met, this is the case for:
- * hugepages, ipmi, mcelog, intel_rdt, virt, ovs_stats, ovs_events
-
-List and description of tags used in ansible scripts
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Tags can be used to run a specific part of the configuration without running the whole playbook.
-To run a specific parts only:
-
-.. code:: bash
-
- $ sudo ansible-playbook -i default.inv collectd_service.yml --tags "syslog,cpu,uuid"
-
-To disable some parts or plugins:
-
-.. code:: bash
-
- $ sudo ansible-playbook -i default.inv collectd_service.yml --skip-tags "en_default_all,syslog,cpu,uuid"
-
-List of available tags:
-
-install_docker
- Install docker and required dependencies with package manager.
-
-add_docker_proxy
- Configure proxy file for docker service if proxy is set on host environment.
-
-rm_config_dir
- Remove collectd config files.
-
-copy_additional_configs
- Copy additional configuration files to target system. Path to additional configuration
- is stored in $barometer_dir/docker/ansible/roles/config_files/vars/main.yml as additional_configs_path.
-
-en_default_all
- Set of default read plugins: contextswitch, cpu, cpufreq, df, disk, ethstat, ipc, irq,
- load, memory, numa, processes, swap, turbostat, uptime.
-
-plugins tags
- The following tags can be used to enable/disable plugins: csv, contextswitch, cpu,
- cpufreq, df, disk, ethstat, ipc, irq, load, memory, numa, processes, swap, turbostat,
- uptime, exec, hugepages, ipmi, kafka, logfile, mcelogs, network, pmu, rdt, rrdtool,
- snmp, syslog, virt, ovs_stats, ovs_events, uuid, dpdkevents, dpdkstat.
-
Installing Docker
-----------------
.. Describe the specific capabilities and usage for <XYZ> feature.
@@ -418,7 +107,7 @@ Installing Docker
use of Ansible-Playbook.
On Ubuntu
-^^^^^^^^^^
+^^^^^^^^^
.. note::
* sudo permissions are required to install docker.
* These instructions are for Ubuntu 16.10
@@ -886,7 +575,7 @@ Run the Influxdb and Grafana Images
-----------------------------------
Run the InfluxDB docker image
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code:: bash
$ sudo docker run -tid -v /var/lib/influxdb:/var/lib/influxdb --net=host\
@@ -1017,7 +706,7 @@ folowing actions have to be performed
on shared folders to not affect new setup with an old configuration.
Build and Run VES and Kafka Docker Images
-------------------------------------------
+-----------------------------------------
Download VES and Kafka docker images
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -1169,10 +858,10 @@ wide metrics that are collected by barometer-ves container.
Setup instructions are located in: :ref:`Setup VES Test Collector`
Build and Run DMA and Redis Docker Images
------------------------------------------------------
+-----------------------------------------
Download DMA docker images
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^
If you wish to use pre-built barometer project's DMA images, you can pull the
images from https://hub.docker.com/r/opnfv/barometer-dma/
@@ -1190,7 +879,7 @@ images from https://hub.docker.com/r/opnfv/barometer-dma/
`Run DMA Docker Image`_
Build DMA docker image
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^
Build DMA docker image:
@@ -1218,7 +907,7 @@ Output should contain a barometer image:
opnfv/barometer-dma latest 2f14fbdbd498 3 hours ago 941 MB
Run Redis docker image
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^
.. note::
Before running DMA, Redis must be running.
@@ -1236,7 +925,7 @@ Check your docker image is running
sudo docker ps
Run DMA docker image
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^
.. note::
Run DMA docker image with default configuration
@@ -1275,7 +964,7 @@ Run DMA docker image with default configuration
$ sudo ln -s ${PWD}/threshold /usr/local/bin/
References
-^^^^^^^^^^^
+^^^^^^^^^^
.. [1] https://docs.docker.com/engine/admin/systemd/#httphttps-proxy
.. [2] https://docs.docker.com/engine/installation/linux/docker-ce/centos/#install-using-the-repository
.. [3] https://docs.docker.com/engine/userguide/
diff --git a/docs/release/userguide/installguide.oneclick.rst b/docs/release/userguide/installguide.oneclick.rst
new file mode 100644
index 00000000..07bc8c1e
--- /dev/null
+++ b/docs/release/userguide/installguide.oneclick.rst
@@ -0,0 +1,331 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) <optionally add copywriters name>
+.. _barometer-oneclick-userguide:
+
+=======================================
+OPNFV Barometer One Click Install Guide
+=======================================
+
+.. contents::
+ :depth: 3
+ :local:
+
+The intention of this user guide is to outline how to use the ansible playbooks for a one click installation of Barometer. A more in-depth installation guide is available with the :ref:`Docker user guide <barometer-docker-userguide>`.
+
+
+One Click Install with Ansible
+------------------------------
+
+
+Proxy for package manager on host
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+.. note::
+ This step has to be performed only if host is behind HTTP/HTTPS proxy
+
+Proxy URL have to be set in dedicated config file
+
+1. CentOS - /etc/yum.conf
+
+.. code:: bash
+
+ proxy=http://your.proxy.domain:1234
+
+2. Ubuntu - /etc/apt/apt.conf
+
+.. code:: bash
+
+ Acquire::http::Proxy "http://your.proxy.domain:1234"
+
+After update of config file, apt mirrors have to be updated via 'apt-get update'
+
+.. code:: bash
+
+ $ sudo apt-get update
+
+Proxy environment variables (for docker and pip)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+.. note::
+ This step has to be performed only if host is behind HTTP/HTTPS proxy
+
+Configuring proxy for packaging system is not enough, also some proxy
+environment variables have to be set in the system before ansible scripts
+can be started.
+Barometer configures docker proxy automatically via ansible task as a part
+of 'one click install' process - user only has to provide proxy URL using common
+shell environment variables and ansible will automatically configure proxies
+for docker(to be able to fetch barometer images). Another component used by
+ansible (e.g. pip is used for downloading python dependencies) will also benefit
+from setting proxy variables properly in the system.
+
+Proxy variables used by ansible One Click Install:
+ * http_proxy
+ * https_proxy
+ * ftp_proxy
+ * no_proxy
+
+Variables mentioned above have to be visible for superuser (because most
+actions involving ansible-barometer installation require root privileges).
+Proxy variables are commonly defined in '/etc/environment' file (but any other
+place is good as long as variables can be seen by commands using 'su').
+
+Sample proxy configuration in /etc/environment:
+
+.. code:: bash
+
+ http_proxy=http://your.proxy.domain:1234
+ https_proxy=http://your.proxy.domain:1234
+ ftp_proxy=http://your.proxy.domain:1234
+ no_proxy=localhost
+
+Install Ansible
+^^^^^^^^^^^^^^^
+.. note::
+ * sudo permissions or root access are required to install ansible.
+ * ansible version needs to be 2.4+, because usage of import/include statements
+
+The following steps have been verified with Ansible 2.6.3 on Ubuntu 16.04 and 18.04.
+To install Ansible 2.6.3 on Ubuntu:
+
+.. code:: bash
+
+ $ sudo apt-get install python
+ $ sudo apt-get install python-pip
+ $ sudo -H pip install 'ansible==2.6.3'
+
+The following steps have been verified with Ansible 2.6.3 on Centos 7.5.
+To install Ansible 2.6.3 on Centos:
+
+.. code:: bash
+
+ $ sudo yum install python
+ $ sudo yum install epel-release
+ $ sudo yum install python-pip
+ $ sudo -H pip install 'ansible==2.6.3'
+ $ sudo yum install git
+
+.. note::
+ When using multi-node-setup, please make sure that 'python' package is
+ installed on all of the target nodes (ansible during 'Gathering facts'
+ phase is using python2 and it may not be installed by default on some
+ distributions - e.g. on Ubuntu 16.04 it has to be installed manually)
+
+Clone barometer repo
+^^^^^^^^^^^^^^^^^^^^
+
+.. code:: bash
+
+ $ git clone https://gerrit.opnfv.org/gerrit/barometer
+ $ cd barometer/docker/ansible
+
+Edit inventory file
+^^^^^^^^^^^^^^^^^^^
+Edit inventory file and add hosts: $barometer_dir/docker/ansible/default.inv
+
+.. code:: bash
+
+ [collectd_hosts]
+ localhost
+
+ [collectd_hosts:vars]
+ install_mcelog=true
+ insert_ipmi_modules=true
+
+ [influxdb_hosts]
+ localhost
+
+ [grafana_hosts]
+ localhost
+
+ [prometheus_hosts]
+ #localhost
+
+ [zookeeper_hosts]
+ #NOTE: currently one zookeeper host is supported
+ #hostname
+
+ [kafka_hosts]
+ #hostname
+
+ [ves_hosts]
+ #hostname
+
+Change localhost to different hosts where neccessary.
+Hosts for influxdb and grafana are required only for collectd_service.yml.
+Hosts for zookeeper, kafka and ves are required only for collectd_ves.yml.
+
+.. note::
+ Zookeeper, Kafka and VES need to be on the same host, there is no
+ support for multi node setup.
+
+To change host for kafka edit kafka_ip_addr in ./roles/config_files/vars/main.yml.
+
+Additional plugin dependencies
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+By default ansible will try to fulfill dependencies for mcelog and ipmi plugin.
+For mcelog plugin it installs mcelog daemon. For ipmi it tries to insert ipmi_devintf
+and ipmi_si kernel modules.
+This can be changed in inventory file with use of variables install_mcelog
+and insert_ipmi_modules, both variables are independent:
+
+.. code:: bash
+
+ [collectd_hosts:vars]
+ install_mcelog=false
+ insert_ipmi_modules=false
+
+.. note::
+ On Ubuntu 18.04 the deb package for mcelog daemon is not available in official
+ Ubuntu repository. In that case ansible scripts will try to download, make and
+ install the daemon from mcelog git repository.
+
+Configure ssh keys
+^^^^^^^^^^^^^^^^^^
+
+Generate ssh keys if not present, otherwise move onto next step.
+
+.. code:: bash
+
+ $ sudo ssh-keygen
+
+Copy ssh key to all target hosts. It requires to provide root password.
+The example is for localhost.
+
+.. code:: bash
+
+ $ sudo -i
+ $ ssh-copy-id root@localhost
+
+Verify that key is added and password is not required to connect.
+
+.. code:: bash
+
+ $ sudo ssh root@localhost
+
+.. note::
+ Keys should be added to every target host and [localhost] is only used as an
+ example. For multinode installation keys need to be copied for each node:
+ [collectd_hostname], [influxdb_hostname] etc.
+
+Download and run Collectd+Influxdb+Grafana containers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The One Click installation features easy and scalable deployment of Collectd,
+Influxdb and Grafana containers using Ansible playbook. The following steps goes
+through more details.
+
+.. code:: bash
+
+ $ sudo -H ansible-playbook -i default.inv collectd_service.yml
+
+Check the three containers are running, the output of docker ps should be similar to:
+
+.. code:: bash
+
+ $ sudo docker ps
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ a033aeea180d opnfv/barometer-grafana "/run.sh" 9 days ago Up 7 minutes bar-grafana
+ 1bca2e4562ab opnfv/barometer-influxdb "/entrypoint.sh in..." 9 days ago Up 7 minutes bar-influxdb
+ daeeb68ad1d5 opnfv/barometer-collectd "/run_collectd.sh ..." 9 days ago Up 7 minutes bar-collectd
+
+To make some changes when a container is running run:
+
+.. code:: bash
+
+ $ sudo docker exec -ti <CONTAINER ID> /bin/bash
+
+Connect to <host_ip>:3000 with a browser and log into Grafana: admin/admin.
+For short introduction please see the:
+`Grafana guide <http://docs.grafana.org/guides/getting_started/>`_.
+
+The collectd configuration files can be accessed directly on target system in '/opt/collectd/etc/collectd.conf.d'.
+It can be used for manual changes or enable/disable plugins. If configuration has been modified it is required to
+restart collectd:
+
+.. code:: bash
+
+ $ sudo docker restart bar-collectd
+
+Download and run collectd+kafka+ves containers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code:: bash
+
+ $ sudo ansible-playbook -i default.inv collectd_ves.yml
+
+Check the containers are running, the output of docker ps should be similar to:
+
+.. code:: bash
+
+ $ sudo docker ps
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ 29035be2dab5 zookeeper:3.4.11 "/docker-entrypoint._" 7 minutes ago Up 7 minutes bar-zookeeper
+ eb8bba3c0b76 opnfv/barometer-ves "./start_ves_app.s..." 6 minutes ago Up 6 minutes bar-ves
+ 86702a96a68c opnfv/barometer-kafka "/src/start_kafka.sh" 6 minutes ago Up 6 minutes bar-kafka
+ daeeb68ad1d5 opnfv/barometer-collectd "/run_collectd.sh ..." 6 minutes ago Up 6 minutes bar-collectd
+
+
+To make some changes when a container is running run:
+
+.. code:: bash
+
+ $ sudo docker exec -ti <CONTAINER ID> /bin/bash
+
+List of default plugins for collectd container
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+.. note::
+ The dpdk plugins dpdkevents and dpdkstat were tested with DPDK v16.11.
+
+By default the collectd is started with default configuration which includes the followin plugins:
+ * csv, contextswitch, cpu, cpufreq, df, disk, ethstat, ipc, irq, load, memory, numa, processes,
+ swap, turbostat, uuid, uptime, exec, hugepages, intel_pmu, ipmi, write_kafka, logfile, mcelog,
+ network, intel_rdt, rrdtool, snmp_agent, syslog, virt, ovs_stats, ovs_events, dpdkevents,
+ dpdkstat
+
+Some of the plugins are loaded depending on specific system requirements and can be omitted if
+dependency is not met, this is the case for:
+ * hugepages, ipmi, mcelog, intel_rdt, virt, ovs_stats, ovs_events
+
+List and description of tags used in ansible scripts
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Tags can be used to run a specific part of the configuration without running the whole playbook.
+To run a specific parts only:
+
+.. code:: bash
+
+ $ sudo ansible-playbook -i default.inv collectd_service.yml --tags "syslog,cpu,uuid"
+
+To disable some parts or plugins:
+
+.. code:: bash
+
+ $ sudo ansible-playbook -i default.inv collectd_service.yml --skip-tags "en_default_all,syslog,cpu,uuid"
+
+List of available tags:
+
+install_docker
+ Install docker and required dependencies with package manager.
+
+add_docker_proxy
+ Configure proxy file for docker service if proxy is set on host environment.
+
+rm_config_dir
+ Remove collectd config files.
+
+copy_additional_configs
+ Copy additional configuration files to target system. Path to additional configuration
+ is stored in $barometer_dir/docker/ansible/roles/config_files/vars/main.yml as additional_configs_path.
+
+en_default_all
+ Set of default read plugins: contextswitch, cpu, cpufreq, df, disk, ethstat, ipc, irq,
+ load, memory, numa, processes, swap, turbostat, uptime.
+
+plugins tags
+ The following tags can be used to enable/disable plugins: csv, contextswitch, cpu,
+ cpufreq, df, disk, ethstat, ipc, irq, load, memory, numa, processes, swap, turbostat,
+ uptime, exec, hugepages, ipmi, kafka, logfile, mcelogs, network, pmu, rdt, rrdtool,
+ snmp, syslog, virt, ovs_stats, ovs_events, uuid, dpdkevents, dpdkstat.
+
+