summaryrefslogtreecommitdiffstats
path: root/lib/common-functions.sh
diff options
context:
space:
mode:
Diffstat (limited to 'lib/common-functions.sh')
-rw-r--r--lib/common-functions.sh320
1 files changed, 2 insertions, 318 deletions
diff --git a/lib/common-functions.sh b/lib/common-functions.sh
index 32ee6bcc..e7041ac4 100644
--- a/lib/common-functions.sh
+++ b/lib/common-functions.sh
@@ -2,9 +2,6 @@
# Common Functions used by OPNFV Apex
# author: Tim Rozet (trozet@redhat.com)
-#python ip_gen command
-ip_gen="python3.4 -B -m apex.ip_utils generate_ip_range"
-
##converts subnet mask to prefix
##params: subnet mask
function prefix2mask {
@@ -17,324 +14,11 @@ function prefix2mask {
##find ip of interface
##params: interface name
function find_ip {
- ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
-}
-
-##finds subnet of ip and netmask
-##params: ip, netmask
-function find_subnet {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- IFS=. read -r m1 m2 m3 m4 <<< "$2"
- printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
-}
-
-##verify subnet has at least n IPs
-##params: subnet mask, n IPs
-function verify_subnet_size {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- num_ips_required=$2
-
- ##this function assumes you would never need more than 254
- ##we check here to make sure
- if [ "$num_ips_required" -ge 254 ]; then
- echo -e "\n\n${red}ERROR: allocating more than 254 IPs is unsupported...Exiting${reset}\n\n"
- return 1
- fi
-
- ##we just return if 3rd octet is not 255
- ##because we know the subnet is big enough
- if [ "$i3" -ne 255 ]; then
- return 0
- elif [ $((254-$i4)) -ge "$num_ips_required" ]; then
- return 0
- else
- echo -e "\n\n${red}ERROR: Subnet is too small${reset}\n\n"
- return 1
- fi
-}
-
-##finds last usable ip (broadcast minus 1) of a subnet from an IP and netmask
-## Warning: This function only works for IPv4 at the moment.
-##params: ip, netmask
-function find_last_ip_subnet {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- IFS=. read -r m1 m2 m3 m4 <<< "$2"
- IFS=. read -r s1 s2 s3 s4 <<< "$((i1 & m1)).$((i2 & m2)).$((i3 & m3)).$((i4 & m4))"
- printf "%d.%d.%d.%d\n" "$((255 - $m1 + $s1))" "$((255 - $m2 + $s2))" "$((255 - $m3 + $s3))" "$((255 - $m4 + $s4 - 1))"
-}
-
-##increments subnet by a value
-##params: ip, value
-##assumes low value
-function increment_subnet {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
-}
-
-##finds netmask of interface
-##params: interface
-##returns long format 255.255.x.x
-function find_netmask {
- ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
-}
-
-##finds short netmask of interface
-##params: interface
-##returns short format, ex: /21
-function find_short_netmask {
- echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
-}
-
-##increments next IP
-##params: ip
-##assumes a /24 subnet
-function next_ip {
- baseaddr="$(echo $1 | cut -d. -f1-3)"
- lsv="$(echo $1 | cut -d. -f4)"
- if [ "$lsv" -ge 254 ]; then
- return 1
- fi
- ((lsv++))
- echo $baseaddr.$lsv
-}
-
-##subtracts a value from an IP address
-##params: last ip, ip_count
-##assumes ip_count is less than the last octect of the address
-subtract_ip() {
- IFS=. read -r i1 i2 i3 i4 <<< "$1"
- ip_count=$2
- if [ $i4 -lt $ip_count ]; then
- echo -e "\n\n${red}ERROR: Can't subtract $ip_count from IP address $1 Exiting${reset}\n\n"
- exit 1
- fi
- printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 - $ip_count ))"
-}
-
-##check if IP is in use
-##params: ip
-##ping ip to get arp entry, then check arp
-function is_ip_used {
- ping -c 5 $1 > /dev/null 2>&1
- arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
-}
-
-##find next usable IP
-##params: ip
-function next_usable_ip {
- new_ip=$(next_ip $1)
- while [ "$new_ip" ]; do
- if ! is_ip_used $new_ip; then
- echo $new_ip
- return 0
- fi
- new_ip=$(next_ip $new_ip)
- done
- return 1
-}
-
-##increment ip by value
-##params: ip, amount to increment by
-##increment_ip $next_private_ip 10
-function increment_ip {
- baseaddr="$(echo $1 | cut -d. -f1-3)"
- lsv="$(echo $1 | cut -d. -f4)"
- incrval=$2
- lsv=$((lsv+incrval))
- if [ "$lsv" -ge 254 ]; then
- return 1
- fi
- echo $baseaddr.$lsv
-}
-
-##finds gateway on system
-##params: interface to validate gateway on (optional)
-##find_gateway em1
-function find_gateway {
- local gw gw_interface
- if [ -z "$1" ]; then
- return 1
- fi
- gw=$(ip route | grep default | awk '{print $3}')
- gw_interface=$(ip route get $gw | awk '{print $3}')
- if [ -n "$1" ]; then
- if [ "$gw_interface" == "$1" ]; then
- echo ${gw}
- fi
- fi
-}
-
-##finds subnet in CIDR notation for interface
-##params: interface to find CIDR
-function find_cidr {
- local cidr network ip netmask short_mask
- if [ -z "$1" ]; then
- return 1
- fi
- ip=$(find_ip $1)
- netmask=$(find_netmask $1)
- if [[ -z "$ip" || -z "$netmask" ]]; then
- return 1
- fi
- network=$(find_subnet ${ip} ${netamsk})
- short_mask=$(find_short_netmask $1)
- if [[ -z "$network" || -z "$short_mask" ]]; then
- return 1
- fi
- cidr="${subnet}'\'${short_mask}"
- echo ${cidr}
-}
-
-##finds block of usable IP addresses for an interface
-##simply returns at the moment the correct format
-##after first 20 IPs, and leave 20 IPs at end of subnet (for floating ips, etc)
-##params: interface to find IP
-function find_usable_ip_range {
- local interface_ip subnet_mask first_block_ip last_block_ip
- if [ -z "$1" ]; then
- return 1
- fi
- interface_ip=$(find_ip $1)
- subnet_mask=$(find_netmask $1)
- if [[ -z "$interface_ip" || -z "$subnet_mask" ]]; then
- return 1
- fi
- interface_ip=$(increment_ip ${interface_ip} 20)
- first_block_ip=$(next_usable_ip ${interface_ip})
- if [ -z "$first_block_ip" ]; then
- return 1
- fi
- last_block_ip=$(find_last_ip_subnet ${interface_ip} ${subnet_mask})
- if [ -z "$last_block_ip" ]; then
- return 1
- else
- last_block_ip=$(subtract_ip ${last_block_ip} 21)
- echo "${first_block_ip},${last_block_ip}"
- fi
-
-}
-
-##generates usable IP range in correct format based on CIDR
-##A block of 20 IP addresses are reserved at beginning of address space.
-##A block of 22 IP addresses are reserved at end of address space, this includes
-##the broadcast IP address.
-##In a /24 IPv4 CIDR, this results in .1-20 as as .234-255 being excluded.
-##params: cidr
-function generate_usable_ip_range {
- if [ -z "$1" ]; then
- return 1
- fi
- echo $($ip_gen $1 21 -23)
-}
-
-
-##find the undercloud IP address
-##finds first usable IP on subnet
-##params: interface
-function find_provisioner_ip {
- local interface_ip
- if [ -z "$1" ]; then
- return 1
- fi
- interface_ip=$(find_ip $1)
- if [ -z "$interface_ip" ]; then
- return 1
- fi
- echo $(increment_ip ${interface_ip} 1)
-}
-
-##generates undercloud IP address based on CIDR
-##params: cidr
-function generate_provisioner_ip {
- if [ -z "$1" ]; then
- return 1
- fi
- echo $($ip_gen $1 1 1)
-}
-
-
-##finds the dhcp range available via interface
-##uses first 8 IPs, after 2nd IP
-##params: interface
-function find_dhcp_range {
- local dhcp_range_start dhcp_range_end interface_ip
- if [ -z "$1" ]; then
- return 1
- fi
- interface_ip=$(find_ip $1)
- if [ -z "$interface_ip" ]; then
- return 1
- fi
- dhcp_range_start=$(increment_ip ${interface_ip} 2)
- dhcp_range_end=$(increment_ip ${dhcp_range_start} 8)
- echo "${dhcp_range_start},${dhcp_range_end}"
-}
-
-##generates the dhcp range available via CIDR
-##uses first 8 IPs, after 1st IP
-##params: cidr
-function generate_dhcp_range {
- if [ -z "$1" ]; then
- return 1
- fi
- echo $($ip_gen $1 2 10)
-}
-
-##finds the introspection range available via interface
-##uses 8 IPs, after the first 10 IPs
-##params: interface
-function find_introspection_range {
- local inspect_range_start inspect_range_end interface_ip
- if [ -z "$1" ]; then
- return 1
- fi
- interface_ip=$(find_ip $1)
- if [ -z "$interface_ip" ]; then
- return 1
- fi
- inspect_range_start=$(increment_ip ${interface_ip} 10)
- inspect_range_end=$(increment_ip ${inspect_range_start} 8)
- echo "${inspect_range_start},${inspect_range_end}"
-}
-
-##generate the introspection range available via CIDR
-##uses 8 IPs, after the first 10 IPs
-##params: cidr
-function generate_introspection_range {
- if [ -z "$1" ]; then
- return 1
- fi
- echo $($ip_gen $1 11 19)
-}
-
-##finds the floating ip range available via interface
-##uses last 20 IPs of a subnet, minus last IP
-##params: interface
-function find_floating_ip_range {
- local float_range_start float_range_end interface_ip subnet_mask
- if [ -z "$1" ]; then
- return 1
- fi
- interface_ip=$(find_ip $1)
- subnet_mask=$(find_netmask $1)
- if [[ -z "$interface_ip" || -z "$subnet_mask" ]]; then
+ if [[ -z "$1" ]]; then
return 1
fi
- float_range_end=$(find_last_ip_subnet ${interface_ip} ${subnet_mask})
- float_range_end=$(subtract_ip ${float_range_end} 1)
- float_range_start=$(subtract_ip ${float_range_end} 19)
- echo "${float_range_start},${float_range_end}"
-}
-##generate the floating range available via CIDR
-##uses last 20 IPs of subnet, minus last 2 IPs.
-##In a /24 IPv4 CIDR, this would result in floating ip range of .234-253
-##params: cidr
-function generate_floating_ip_range {
- if [ -z "$1" ]; then
- return 1
- fi
- echo $($ip_gen $1 -22 -3)
+ python3.4 -B $CONFIG/lib/python/apex-python-utils.py find_ip -i $1
}
##attach interface to OVS and set the network config correctly