diff options
Diffstat (limited to 'config/network/network_settings_vpp.yaml')
| -rw-r--r-- | config/network/network_settings_vpp.yaml | 318 |
1 files changed, 0 insertions, 318 deletions
diff --git a/config/network/network_settings_vpp.yaml b/config/network/network_settings_vpp.yaml deleted file mode 100644 index a40158ea..00000000 --- a/config/network/network_settings_vpp.yaml +++ /dev/null @@ -1,318 +0,0 @@ ---- -# This configuration file defines Network Environment for a -# Baremetal Deployment of OPNFV. It contains default values -# for 5 following networks: -# -# - admin -# - tenant* -# - external* -# - storage* -# - api* -# *) optional networks -# -# Optional networks will be consolidated with the admin network -# if not explicitly configured. -# -# See short description of the networks in the comments below. -# -# "admin" is the short name for Control Plane Network. -# This network should be IPv4 even it is an IPv6 deployment -# IPv6 does not have PXE boot support. -# During OPNFV deployment it is used for node provisioning which will require -# PXE booting as well as running a DHCP server on this network. Be sure to -# disable any other DHCP/TFTP server on this network. -# -# "tenant" is the network used for tenant traffic. -# -# "external" is the network which should have internet or external -# connectivity. External OpenStack networks will be configured to egress this -# network. There can be multiple external networks, but only one assigned as -# "public" which OpenStack public API's will register. -# -# "storage" is the network for storage I/O. -# -# "api" is an optional network for splitting out OpenStack service API -# communication. This should be used for IPv6 deployments. - - -# Meta data for the network configuration -network-config-metadata: - title: LF-POD-1 Network config - version: 0.1 - created: Mon Dec 28 2015 - comment: None - -# DNS Settings -dns-domain: opnfvlf.org -dns-search: opnfvlf.org -dns_nameservers: - - 8.8.8.8 - - 8.8.4.4 -# NTP servers -ntp: - - 0.se.pool.ntp.org - - 1.se.pool.ntp.org -# Syslog server -syslog: - server: 10.128.1.24 - transport: 'tcp' - -# http(s) proxy settings added to /etc/environment of uc and oc nodes -# http_proxy: http://proxy.server:8080 -# https_proxy: https://proxy.server:8081 - -# Common network settings -networks: - # Admin configuration (pxe and jumpstart) - admin: - enabled: true - # Network settings for the Installer VM on admin network - installer_vm: - # Indicates if this VM will be bridged to an interface, or to a bond - nic_type: interface - # Interfaces to bridge for installer VM (use multiple values for bond) - members: - - em1 - # VLAN tag to use for this network on Installer VM, native means none - vlan: native - # IP to assign to Installer VM on this network - ip: 192.0.2.1 - # Usable ip range for the overcloud node IPs (including VIPs) - # Last IP is used for host bridge (i.e. br-admin). - # If empty entire range is usable. - # Cannot overlap with dhcp_range or introspection_range. - overcloud_ip_range: - - 192.0.2.51 - - 192.0.2.99 - # Gateway (only needed when public_network is disabled) - gateway: 192.0.2.1 - # Subnet in CIDR format 192.168.1.0/24 - cidr: 192.0.2.0/24 - # DHCP range for the admin network, automatically provisioned if empty - dhcp_range: - - 192.0.2.2 - - 192.0.2.50 - # Mapping of network configuration for Overcloud Nodes - nic_mapping: - # Mapping for compute profile (nodes assigned as Compute nodes) - compute: - # Physical interface type (interface or bond) - phys_type: interface - # Physical NIC members (Single value allowed for phys_type: interface) - members: - - eth0 - # Mapping for controller profile (nodes assigned as Controller nodes) - controller: - phys_type: interface - members: - - eth0 - - # Tenant network configuration - tenant: - enabled: true - # Subnet in CIDR format 192.168.1.0/24 - cidr: 11.0.0.0/24 - # Tenant network MTU - mtu: 1500 - # Tenant network Overlay segmentation ID range: - # VNI, VLAN-ID, etc. - overlay_id_range: 2,65535 - - # Tenant network segmentation type: - # vlan, vxlan, gre - segmentation_type: vxlan - # Mapping of network configuration for Overcloud Nodes - nic_mapping: - # Mapping for compute profile (nodes assigned as Compute nodes) - compute: - # Physical interface type (interface/bond) - phys_type: interface - # VLAN tag to use with this NIC - vlan: native - # Physical NIC members of this mapping - # Single value allowed for phys_type: interface - members: - # Note logical name like nic1 not valid for fdio deployment yet. - - eth1 - # Mapping for controller profile (nodes assigned as Controller nodes) - controller: - # Physical interface type (interface/bond) - phys_type: interface - vlan: native - # Note: logicial names like nic1 are not valid for fdio deployment yet. - members: - - eth1 - - # Can contain 1 or more external networks - external: - - public: - enabled: true - # Public network MTU - mtu: 1500 - # Network settings for the Installer VM on external network - # (note only valid on 'public' external network) - installer_vm: - # Indicates if this VM will be bridged to an interface, or to a bond - nic_type: interface - vlan: native - # Interfaces to bridge for installer VM (use multiple values for bond) - members: - - em1 - # IP to assign to Installer VM on this network - ip: 192.168.37.1 - cidr: 192.168.37.0/24 - gateway: 192.168.37.1 - # Range to allocate to floating IPs for the public network with Neutron - floating_ip_range: - - 192.168.37.200 - - 192.168.37.220 - # Usable ip range for the overcloud node IPs (including VIPs) - # Last IP will be used for host bridge (i.e. br-public). - # If empty entire range is usable. - # Cannot overlap with dhcp_range or introspection_range. - overcloud_ip_range: - - 192.168.37.10 - - 192.168.37.199 - # Mapping of network configuration for Overcloud Nodes - nic_mapping: - # Mapping for compute profile (nodes assigned as Compute nodes) - compute: - # Physical interface type (interface or bond) - phys_type: interface - # VLAN tag to use with this NIC - vlan: native - # Physical NIC members of this mapping - # Single value allowed for phys_type: interface - members: - - eth2 - # Mapping for controller profile (nodes assigned as Controller nodes) - controller: - phys_type: interface - vlan: native - members: - - eth2 - # External network to be created in OpenStack by Services tenant - external_overlay: - name: Public_internet - type: flat - gateway: 192.168.37.1 - # another external network - # This is an example and not yet supported - - private_cloud: - enabled: false - mtu: 1500 - # Network settings for the Installer VM on external network - # note only valid on 'public' external network - installer_vm: - # Indicates if this VM will be bridged to an interface, or to a bond - nic_type: interface - vlan: 101 - # Interfaces to bridge for installer VM (use multiple values for bond) - members: - - em1 - # IP to assign to Installer VM on this network - ip: 192.168.38.1 - cidr: 192.168.38.0/24 - gateway: 192.168.38.1 - # Range to allocate to floating IPs for the public network with Neutron - floating_ip_range: - - 192.168.38.200 - - 192.168.38.220 - # Usable IP range for overcloud nodes (including VIPs)i - # usually this is a shared subnet. - # Cannot overlap with dhcp_range or introspection_range. - overcloud_ip_range: - - 192.168.38.10 - - 192.168.38.199 - # Mapping of network configuration for Overcloud Nodes - nic_mapping: - # Mapping for compute profile (nodes assigned as Compute nodes) - compute: - # Physical interface type (interface or bond) - phys_type: interface - # VLAN tag to use with this NIC - vlan: 101 - # Physical NIC members of this mappingi - # Single value allowed for phys_type: interface - # Note: logical names like nic1 are not valid for fdio deployment yet. - members: - - eth3 - # Mapping for controller profile (nodes assigned as Controller nodes) - controller: - phys_type: interface - vlan: 101 - members: - - eth3 - # External network to be created in OpenStack by Services tenant - external_overlay: - name: private_cloud - type: vlan - segmentation_id: 101 - gateway: 192.168.38.1 - - # Storage network configuration - storage: - enabled: true - # Subnet in CIDR format - cidr: 12.0.0.0/24 - # Storage network MTU - mtu: 1500 - # Mapping of network configuration for Overcloud Nodes - nic_mapping: - # Mapping for compute profile (nodes assigned as Compute nodes) - compute: - # Physical interface type (interface or bond) - phys_type: interface - # VLAN tag to use with this NIC - vlan: native - # Physical NIC members of this mapping - # Single value allowed for phys_type: interface - members: - # Note logical names like nic1 not valid for fdio deployment yet. - - eth3 - # Mapping for controller profile (nodes assigned as Controller nodes) - controller: - phys_type: interface - vlan: native - members: - - eth3 - - api: - # API network configuration - enabled: false - # Subnet in CIDR format - cidr: fd00:fd00:fd00:4000::/64 - # VLAN tag to use for Overcloud hosts on this network - vlan: 13 - # Api network MTU - mtu: 1500 - # Mapping of network configuration for Overcloud Nodes - nic_mapping: - # Mapping for compute profile (nodes assigned as Compute nodes) - compute: - # Physical interface type (interface or bond) - phys_type: interface - # VLAN tag to use with this NIC - vlan: native - # Physical NIC members of this mapping - # Single value allowed for phys_type: interface - # Note logical names like nic1 not valid for fdio deployment yet. - members: - - eth4 - # Mapping for controller profile (nodes assigned as Controller nodes) - controller: - phys_type: interface - vlan: native - members: - - eth4 - -# Apex specific settings -apex: - networks: - admin: - # Range used for introspection phase (examining nodes). - # This cannot overlap with dhcp_range or overcloud_ip_range. - # for the overcloud default external network - introspection_range: - - 192.0.2.100 - - 192.0.2.120 |