summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--build/Makefile22
-rwxr-xr-xbuild/instack.sh31
-rw-r--r--build/network-environment.yaml31
-rw-r--r--build/nics/controller.yaml2
-rw-r--r--build/opnfv-apex.spec18
-rwxr-xr-xci/clean.sh24
-rwxr-xr-xci/deploy.sh297
-rw-r--r--config/deploy/deploy_settings.yaml21
-rw-r--r--config/deploy/network/network-environment-example.yaml71
-rw-r--r--config/deploy/network/network_settings.yaml53
-rw-r--r--config/inventory/intel_pod2_settings.yaml14
-rw-r--r--lib/common-functions.sh314
12 files changed, 700 insertions, 198 deletions
diff --git a/build/Makefile b/build/Makefile
index 87e8db08..f1341fbe 100644
--- a/build/Makefile
+++ b/build/Makefile
@@ -101,13 +101,15 @@ rpm:
pushd ../ && git archive --format=tar --prefix=opnfv-apex-$(RPMVERS)/ HEAD > build/opnfv-apex.tar
tar -u --xform="s:stack/instack.qcow2:opnfv-apex-$(RPMVERS)/build/instack.qcow2:" --file=opnfv-apex.tar stack/instack.qcow2
tar -u --xform="s:instack.xml:opnfv-apex-$(RPMVERS)/build/instack.xml:" --file=opnfv-apex.tar instack.xml
- tar -u --xform="s:baremetalbrbm_brbm1_0.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_0.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_0.xml
- tar -u --xform="s:baremetalbrbm_brbm1_1.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_1.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_1.xml
- tar -u --xform="s:baremetalbrbm_brbm1_2.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_2.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_2.xml
- tar -u --xform="s:baremetalbrbm_brbm1_3.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_3.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_3.xml
- tar -u --xform="s:baremetalbrbm_brbm1_4.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_4.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_4.xml
+ tar -u --xform="s:baremetalbrbm_brbm1_brbm2_brbm3_0.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_brbm2_brbm3_0.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_brbm2_brbm3_0.xml
+ tar -u --xform="s:baremetalbrbm_brbm1_brbm2_brbm3_1.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_brbm2_brbm3_1.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_brbm2_brbm3_1.xml
+ tar -u --xform="s:baremetalbrbm_brbm1_brbm2_brbm3_2.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_brbm2_brbm3_2.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_brbm2_brbm3_2.xml
+ tar -u --xform="s:baremetalbrbm_brbm1_brbm2_brbm3_3.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_brbm2_brbm3_3.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_brbm2_brbm3_3.xml
+ tar -u --xform="s:baremetalbrbm_brbm1_brbm2_brbm3_4.xml:opnfv-apex-$(RPMVERS)/build/baremetalbrbm_brbm1_brbm2_brbm3_4.xml:" --file=opnfv-apex.tar baremetalbrbm_brbm1_brbm2_brbm3_4.xml
tar -u --xform="s:brbm-net.xml:opnfv-apex-$(RPMVERS)/build/brbm-net.xml:" --file=opnfv-apex.tar brbm-net.xml
tar -u --xform="s:brbm1-net.xml:opnfv-apex-$(RPMVERS)/build/brbm1-net.xml:" --file=opnfv-apex.tar brbm1-net.xml
+ tar -u --xform="s:brbm2-net.xml:opnfv-apex-$(RPMVERS)/build/brbm2-net.xml:" --file=opnfv-apex.tar brbm2-net.xml
+ tar -u --xform="s:brbm3-net.xml:opnfv-apex-$(RPMVERS)/build/brbm3-net.xml:" --file=opnfv-apex.tar brbm3-net.xml
tar -u --xform="s:default-pool.xml:opnfv-apex-$(RPMVERS)/build/default-pool.xml:" --file=opnfv-apex.tar default-pool.xml
tar -u --xform="s:instackenv-virt.json:opnfv-apex-$(RPMVERS)/build/instackenv-virt.json:" --file=opnfv-apex.tar instackenv-virt.json
tar -u --xform="s:stack/overcloud-full-odl.qcow2:opnfv-apex-$(RPMVERS)/build/stack/overcloud-full.qcow2:" --file=opnfv-apex.tar stack/overcloud-full-odl.qcow2
@@ -121,11 +123,11 @@ instack:
.PHONY: instack-clean
instack-clean:
rm -f instackenv-virt.json
- rm -f baremetalbrbm_brbm1_0.xml
- rm -f baremetalbrbm_brbm1_1.xml
- rm -f baremetalbrbm_brbm1_2.xml
- rm -f baremetalbrbm_brbm1_3.xml
- rm -f baremetalbrbm_brbm1_4.xml
+ rm -f baremetalbrbm_brbm1_brbm2_brbm3_0.xml
+ rm -f baremetalbrbm_brbm1_brbm2_brbm3_1.xml
+ rm -f baremetalbrbm_brbm1_brbm2_brbm3_2.xml
+ rm -f baremetalbrbm_brbm1_brbm2_brbm3_3.xml
+ rm -f baremetalbrbm_brbm1_brbm2_brbm3_4.xml
rm -f instack.xml
.PHONY: iso
diff --git a/build/instack.sh b/build/instack.sh
index e52e3e55..39ab9b05 100755
--- a/build/instack.sh
+++ b/build/instack.sh
@@ -7,6 +7,7 @@ rdo_images_uri=https://ci.centos.org/artifacts/rdo/images/liberty/delorean/stabl
vm_index=4
RDO_RELEASE=liberty
SSH_OPTIONS=(-o StrictHostKeyChecking=no -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null)
+OPNFV_NETWORK_TYPES="admin_network private_network public_network storage_network"
# check for dependancy packages
for i in rpm-build createrepo libguestfs-tools python-docutils bsdtar; do
@@ -88,7 +89,7 @@ sudo ../ci/clean.sh
# and rebuild the bare undercloud VMs
ssh -T ${SSH_OPTIONS[@]} stack@localhost <<EOI
set -e
-NODE_COUNT=5 NODE_CPU=2 NODE_MEM=8192 TESTENV_ARGS="--baremetal-bridge-names 'brbm brbm1'" instack-virt-setup
+NODE_COUNT=5 NODE_CPU=2 NODE_MEM=8192 TESTENV_ARGS="--baremetal-bridge-names 'brbm brbm1 brbm2 brbm3'" instack-virt-setup
EOI
# let dhcp happen so we can get the ip
@@ -163,24 +164,28 @@ fi
echo $'\nGenerating libvirt configuration'
for i in \$(seq 0 $vm_index); do
- virsh dumpxml baremetalbrbm_brbm1_\$i | awk '/model type='\''virtio'\''/{c++;if(c==2){sub("model type='\''virtio'\''","model type='\''rtl8139'\''");c=0}}1' > baremetalbrbm_brbm1_\$i.xml
+ virsh dumpxml baremetalbrbm_brbm1_brbm2_brbm3_\$i | awk '/model type='\''virtio'\''/{c++;if(c==2){sub("model type='\''virtio'\''","model type='\''rtl8139'\''");c=0}}1' > baremetalbrbm_brbm1_brbm2_brbm3_\$i.xml
done
virsh dumpxml instack > instack.xml
virsh net-dumpxml brbm > brbm-net.xml
virsh net-dumpxml brbm1 > brbm1-net.xml
+virsh net-dumpxml brbm2> brbm2-net.xml
+virsh net-dumpxml brbm3 > brbm3-net.xml
virsh pool-dumpxml default > default-pool.xml
EOI
# copy off the instack artifacts
echo "Copying instack files to build directory"
for i in $(seq 0 $vm_index); do
- scp ${SSH_OPTIONS[@]} stack@localhost:baremetalbrbm_brbm1_${i}.xml .
+ scp ${SSH_OPTIONS[@]} stack@localhost:baremetalbrbm_brbm1_brbm2_brbm3_${i}.xml .
done
scp ${SSH_OPTIONS[@]} stack@localhost:instack.xml .
scp ${SSH_OPTIONS[@]} stack@localhost:brbm-net.xml .
scp ${SSH_OPTIONS[@]} stack@localhost:brbm1-net.xml .
+scp ${SSH_OPTIONS[@]} stack@localhost:brbm2-net.xml .
+scp ${SSH_OPTIONS[@]} stack@localhost:brbm3-net.xml .
scp ${SSH_OPTIONS[@]} stack@localhost:default-pool.xml .
# pull down the the built images
@@ -254,22 +259,6 @@ LIBGUESTFS_BACKEND=direct virt-customize --upload ../opendaylight-puppet-neutron
## END WORK AROUND
popd
-# resize instack machine
-echo "Checking if instack needs to be resized..."
-instack_size=$(LIBGUESTFS_BACKEND=direct virt-filesystems --long -h --all -a stack/instack.qcow2 |grep device | grep -Eo "[0-9\.]+G" | sed -n 's/\([0-9][0-9]*\).*/\1/p')
-if [ "$instack_size" -lt 30 ]; then
- qemu-img create -f qcow2 -o preallocation=metadata newinstack.qcow2 30G
- LIBGUESTFS_BACKEND=direct virt-resize --expand /dev/sda1 stack/instack.qcow2 newinstack.qcow2;
- LIBGUESTFS_BACKEND=direct virt-customize -a newinstack.qcow2 --run-command 'xfs_growfs -d /dev/sda1 || true'
- LIBGUESTFS_BACKEND=direct virt-sparsify newinstack.qcow2 stack/instack.qcow2
- new_size=$(LIBGUESTFS_BACKEND=direct virt-filesystems --long -h --all -a stack/instack.qcow2 |grep device | grep -Eo "[0-9\.]+G" | sed -n 's/\([0-9][0-9]*\).*/\1/p')
- if [ "$new_size" -lt 30 ]; then
- echo "Error resizing instack machine, disk size is ${new_size}"
- exit 1
- else
- echo "instack successfully resized"
- fi
-fi
# move and Sanitize private keys from instack.json file
mv stack/instackenv.json instackenv-virt.json
sed -i '/pm_password/c\ "pm_password": "INSERT_STACK_USER_PRIV_KEY",' instackenv-virt.json
@@ -281,8 +270,8 @@ set -e
virsh destroy instack 2> /dev/null || echo -n ''
virsh undefine instack --remove-all-storage 2> /dev/null || echo -n ''
for i in \$(seq 0 $vm_index); do
- virsh destroy baremetalbrbm_brbm1_\$i 2> /dev/null || echo -n ''
- virsh undefine baremetalbrbm_brbm1_\$i --remove-all-storage 2> /dev/null || echo -n ''
+ virsh destroy baremetalbrbm_brbm1_brbm2_brbm3_\$i 2> /dev/null || echo -n ''
+ virsh undefine baremetalbrbm_brbm1_brbm2_brbm3_\$i --remove-all-storage 2> /dev/null || echo -n ''
done
EOI
diff --git a/build/network-environment.yaml b/build/network-environment.yaml
index a3d56025..a42a54bb 100644
--- a/build/network-environment.yaml
+++ b/build/network-environment.yaml
@@ -37,3 +37,34 @@ parameter_defaults:
ExternalInterfaceDefaultRoute: 192.168.37.1
EC2MetadataIp: 192.0.2.1
DnsServers: ["8.8.8.8","8.8.4.4"]
+
+# ServiceNetMap:
+# NeutronTenantNetwork: tenant
+# CeilometerApiNetwork: internal_api
+# MongoDbNetwork: internal_api
+# CinderApiNetwork: internal_api
+# CinderIscsiNetwork: storage
+# GlanceApiNetwork: storage
+# GlanceRegistryNetwork: internal_api
+# KeystoneAdminApiNetwork: internal_api
+# KeystonePublicApiNetwork: internal_api
+# NeutronApiNetwork: internal_api
+# HeatApiNetwork: internal_api
+# NovaApiNetwork: internal_api
+# NovaMetadataNetwork: internal_api
+# NovaVncProxyNetwork: internal_api
+# SwiftMgmtNetwork: storage_mgmt
+# SwiftProxyNetwork: storage
+# HorizonNetwork: internal_api
+# MemcachedNetwork: internal_api
+# RabbitMqNetwork: internal_api
+# RedisNetwork: internal_api
+# MysqlNetwork: internal_api
+# CephClusterNetwork: storage_mgmt
+# CephPublicNetwork: storage
+# # Define which network will be used for hostname resolution
+# ControllerHostnameResolveNetwork: internal_api
+# ComputeHostnameResolveNetwork: internal_api
+# BlockStorageHostnameResolveNetwork: internal_api
+# ObjectStorageHostnameResolveNetwork: internal_api
+# CephStorageHostnameResolveNetwork: storage
diff --git a/build/nics/controller.yaml b/build/nics/controller.yaml
index 1b421ac9..336b34a1 100644
--- a/build/nics/controller.yaml
+++ b/build/nics/controller.yaml
@@ -106,7 +106,7 @@ resources:
members:
-
type: interface
- name: nic2
+ name: nic3
# force the MAC address of the bridge to this interface
primary: true
diff --git a/build/opnfv-apex.spec b/build/opnfv-apex.spec
index 9b6a6f85..cb9f7705 100644
--- a/build/opnfv-apex.spec
+++ b/build/opnfv-apex.spec
@@ -1,5 +1,5 @@
Name: opnfv-apex
-Version: 2.6
+Version: 2.7
Release: %{release}
Summary: Scripts and Disk images for deployment
@@ -33,12 +33,16 @@ install ci/clean.sh %{buildroot}%{_bindir}/opnfv-clean
mkdir -p %{buildroot}%{_var}/opt/opnfv/stack/
mkdir -p %{buildroot}%{_var}/opt/opnfv/nics/
+mkdir -p %{buildroot}%{_var}/opt/opnfv/lib/
+install lib/common-functions.sh %{buildroot}%{_var}/opt/opnfv/lib/
install build/instack.qcow2 %{buildroot}%{_var}/opt/opnfv/stack/
install build/instack.xml %{buildroot}%{_var}/opt/opnfv/
-install build/baremetalbrbm_brbm1_*.xml %{buildroot}%{_var}/opt/opnfv/
+install build/baremetalbrbm_brbm1_brbm2_brbm3_*.xml %{buildroot}%{_var}/opt/opnfv/
install build/brbm-net.xml %{buildroot}%{_var}/opt/opnfv/
install build/brbm1-net.xml %{buildroot}%{_var}/opt/opnfv/
+install build/brbm2-net.xml %{buildroot}%{_var}/opt/opnfv/
+install build/brbm3-net.xml %{buildroot}%{_var}/opt/opnfv/
install build/default-pool.xml %{buildroot}%{_var}/opt/opnfv/
install build/network-environment.yaml %{buildroot}%{_var}/opt/opnfv/
install build/nics/controller.yaml %{buildroot}%{_var}/opt/opnfv/nics/
@@ -55,15 +59,19 @@ install docs/installation-instructions.html %{buildroot}%{_docdir}/opnfv/
install docs/release-notes/index.rst %{buildroot}%{_docdir}/opnfv/release-notes.rst
install docs/release-notes.html %{buildroot}%{_docdir}/opnfv/
install config/deploy/deploy_settings.yaml %{buildroot}%{_docdir}/opnfv/deploy_settings.yaml.example
+install config/deploy/network/network_settings.yaml %{buildroot}%{_docdir}/opnfv/network_settings.yaml.example
%files
%{_bindir}/opnfv-deploy
%{_bindir}/opnfv-clean
+%{_var}/opt/opnfv/lib/common-functions.sh
%{_var}/opt/opnfv/stack/instack.qcow2
%{_var}/opt/opnfv/instack.xml
-%{_var}/opt/opnfv/baremetalbrbm_brbm1_*.xml
+%{_var}/opt/opnfv/baremetalbrbm_brbm1_brbm2_brbm3_*.xml
%{_var}/opt/opnfv/brbm-net.xml
%{_var}/opt/opnfv/brbm1-net.xml
+%{_var}/opt/opnfv/brbm2-net.xml
+%{_var}/opt/opnfv/brbm3-net.xml
%{_var}/opt/opnfv/default-pool.xml
%{_var}/opt/opnfv/network-environment.yaml
%{_var}/opt/opnfv/nics/controller.yaml
@@ -77,9 +85,11 @@ install config/deploy/deploy_settings.yaml %{buildroot}%{_docdir}/opnfv/deploy_s
%doc %{_docdir}/opnfv/release-notes.rst
%doc %{_docdir}/opnfv/release-notes.html
%doc %{_docdir}/opnfv/deploy_settings.yaml.example
-
+%doc %{_docdir}/opnfv/network_settings.yaml.example
%changelog
+* Tue Dec 20 2015 Tim Rozet <trozet@redhat.com> - 2.7-1
+- Modifies networks to include OPNFV private/storage networks
* Tue Dec 15 2015 Dan Radez <dradez@redhat.com> - 2.6-1
- Added deploy settings for flat network config
- cleaned up files that don't need to be in the rpm
diff --git a/ci/clean.sh b/ci/clean.sh
index 2b488804..bc193a34 100755
--- a/ci/clean.sh
+++ b/ci/clean.sh
@@ -4,7 +4,7 @@
#author: Dan Radez (dradez@redhat.com)
#
vm_index=4
-
+ovs_bridges="brbm brbm1 brbm2 brbm3"
# Clean off instack VM
virsh destroy instack 2> /dev/null || echo -n ''
virsh undefine instack --remove-all-storage 2> /dev/null || echo -n ''
@@ -13,20 +13,18 @@ rm -f /var/lib/libvirt/images/instack.qcow2 2> /dev/null
# Clean off baremetal VMs in case they exist
for i in $(seq 0 $vm_index); do
- virsh destroy baremetalbrbm_brbm1_$i 2> /dev/null || echo -n ''
- virsh undefine baremetalbrbm_brbm1_$i --remove-all-storage 2> /dev/null || echo -n ''
- virsh vol-delete baremetalbrbm_brbm1_${i}.qcow2 --pool default 2> /dev/null
- rm -f /var/lib/libvirt/images/baremetalbrbm_brbm1_${i}.qcow2 2> /dev/null
+ virsh destroy baremetalbrbm_brbm1_brbm2_brbm3_$i 2> /dev/null || echo -n ''
+ virsh undefine baremetalbrbm_brbm1_brbm2_brbm3_$i --remove-all-storage 2> /dev/null || echo -n ''
+ virsh vol-delete baremetalbrbm_brbm1_brbm2_brbm3_${i}.qcow2 --pool default 2> /dev/null
+ rm -f /var/lib/libvirt/images/baremetalbrbm_brbm1_brbm2_brbm3_${i}.qcow2 2> /dev/null
done
-# Clean off brbm bridges
-virsh net-destroy brbm 2> /dev/null
-virsh net-undefine brbm 2> /dev/null
-vs-vsctl del-br brbm 2> /dev/null
-
-virsh net-destroy brbm1 2> /dev/null
-virsh net-undefine brbm1 2> /dev/null
-vs-vsctl del-br brbm1 2> /dev/null
+# Clean off created bridges
+for bridge in ${ovs_bridges}; do
+ virsh net-destroy ${bridge} 2> /dev/null
+ virsh net-undefine ${bridge} 2> /dev/null
+ ovs-vsctl del-br ${bridge} 2> /dev/null
+done
# clean pub keys from root's auth keys
sed -i '/stack@instack.localdomain/d' /root/.ssh/authorized_keys
diff --git a/ci/deploy.sh b/ci/deploy.sh
index 8b5fa539..118c763d 100755
--- a/ci/deploy.sh
+++ b/ci/deploy.sh
@@ -30,13 +30,22 @@ net_isolation_enabled="TRUE"
declare -i CNT
declare UNDERCLOUD
declare -A deploy_options_array
+declare -A NET_MAP
SSH_OPTIONS=(-o StrictHostKeyChecking=no -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null -o LogLevel=error)
DEPLOY_OPTIONS=""
RESOURCES=/var/opt/opnfv/stack
CONFIG=/var/opt/opnfv
INSTACKENV=$CONFIG/instackenv.json
-NETENV=$CONFIG/network-environment.yaml
+OPNFV_NETWORK_TYPES="admin_network private_network public_network storage_network"
+# Netmap used to map networks to OVS bridge names
+NET_MAP['admin_network']="brbm"
+NET_MAP['private_network']="brbm1"
+NET_MAP['public_network']="brbm2"
+NET_MAP['storage_network']="brbm3"
+
+##LIBRARIES
+source $CONFIG/lib/common-functions.sh
##FUNCTIONS
##translates yaml into variables
@@ -90,6 +99,111 @@ parse_setting_value() {
local mystr=$1
echo $(echo $mystr | grep -Eo "\=.*$" | tr -d '=')
}
+##parses network settings yaml into globals
+parse_network_settings() {
+ local required_network_settings="cidr"
+ local common_optional_network_settings="usable_ip_range"
+ local admin_network_optional_settings="provisioner_ip dhcp_range introspection_range"
+ local public_network_optional_settings="floating_ip_range gateway provisioner_ip"
+ local nic_value cidr
+
+ eval $(parse_yaml ${NETSETS})
+ for network in ${OPNFV_NETWORK_TYPES}; do
+ if [[ $(eval echo \${${network}_enabled}) == 'true' ]]; then
+ enabled_network_list+="${network} "
+ elif [ "${network}" == 'admin_network' ]; then
+ echo -e "${red}ERROR: You must enable admin_network and configure it explicitly or use auto-detection${reset}"
+ exit 1
+ elif [ "${network}" == 'public_network' ]; then
+ echo -e "${red}ERROR: You must enable public_network and configure it explicitly or use auto-detection${reset}"
+ exit 1
+ else
+ echo -e "${blue}INFO: Network: ${network} is disabled, will collapse into admin_network"
+ fi
+ done
+
+ # check for enabled network values
+ for enabled_network in ${enabled_network_list}; do
+ # detect required settings first to continue
+ echo -e "${blue}INFO: Detecting Required settings for: ${enabled_network}${reset}"
+ for setting in ${required_network_settings}; do
+ eval "setting_value=\${${enabled_network}_${setting}}"
+ if [ -z "${setting_value}" ]; then
+ # if setting is missing we try to autodetect
+ eval "nic_value=\${${enabled_network}_bridged_interface}"
+ if [ -n "$nic_value" ]; then
+ setting_value=$(eval find_${setting} ${nic_value})
+ if [ -n "$setting_value" ]; then
+ eval "${enabled_network}_${setting}=${setting_value}"
+ echo -e "${blue}INFO: Auto-detection: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ else
+ echo -e "${red}ERROR: Auto-detection failed: ${setting} not found using interface: ${nic_value}${reset}"
+ exit 1
+ fi
+ else
+ echo -e "${red}ERROR: Required setting: ${setting} not found, and bridge interface not provided\
+for Auto-detection${reset}"
+ exit 1
+ fi
+ else
+ echo -e "${blue}INFO: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ fi
+ done
+ echo -e "${blue}INFO: Detecting Common settings for: ${enabled_network}${reset}"
+ # detect optional common settings
+ # these settings can be auto-generated if missing
+ for setting in ${common_optional_network_settings}; do
+ eval "setting_value=\${${enabled_network}_${setting}}"
+ if [ -z "${setting_value}" ]; then
+ setting_value=$(eval find_${setting} ${nic_value})
+ if [ -n "$setting_value" ]; then
+ eval "${enabled_network}_${setting}=${setting_value}"
+ echo -e "${blue}INFO: Auto-detection: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ else
+ # if Auto-detection fails we can auto-generate with CIDR
+ eval "cidr=\${${enabled_network}_cidr}"
+ setting_value=$(eval generate_${setting} ${cidr})
+ if [ -n "$setting_value" ]; then
+ eval "${enabled_network}_${setting}=${setting_value}"
+ echo -e "${blue}INFO: Auto-generated: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ else
+ echo -e "${red}ERROR: Auto-generation failed: ${setting} not found${reset}"
+ exit 1
+ fi
+ fi
+ else
+ echo -e "${blue}INFO: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ fi
+ done
+ echo -e "${blue}INFO: Detecting Network Specific settings for: ${enabled_network}${reset}"
+ # detect network specific settings
+ if [ -n $(eval echo \${${network}_optional_settings}) ]; then
+ eval "network_specific_settings=\${${enabled_network}_optional_settings}"
+ for setting in ${network_specific_settings}; do
+ eval "setting_value=\${${enabled_network}_${setting}}"
+ if [ -z "${setting_value}" ]; then
+ setting_value=$(eval find_${setting} ${nic_value})
+ if [ -n "$setting_value" ]; then
+ eval "${enabled_network}_${setting}=${setting_value}"
+ echo -e "${blue}INFO: Auto-detection: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ else
+ eval "cidr=\${${enabled_network}_cidr}"
+ setting_value=$(eval generate_${setting} ${cidr})
+ if [ -n "$setting_value" ]; then
+ eval "${enabled_network}_${setting}=${setting_value}"
+ echo -e "${blue}INFO: Auto-generated: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ else
+ echo -e "${red}ERROR: Auto-generation failed: ${setting} not found${reset}"
+ exit 1
+ fi
+ fi
+ else
+ echo -e "${blue}INFO: ${enabled_network}_${setting}: ${setting_value}${reset}"
+ fi
+ done
+ fi
+ done
+}
##parses deploy settings yaml into globals and options array
##params: none
##usage: parse_deploy_settings
@@ -239,14 +353,50 @@ function configure_deps {
sudo sh -c "echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf"
fi
- # ensure brbm networks are configured
+ # ensure no dhcp server is running on jumphost
+ if ! sudo systemctl status dhcpd | grep dead; then
+ echo "${red}WARN: DHCP Server detected on jumphost, disabling...${reset}"
+ sudo systemctl stop dhcpd
+ sudo systemctl disable dhcpd
+ fi
+
+ # ensure networks are configured
systemctl start openvswitch
- ovs-vsctl list-br | grep brbm > /dev/null || ovs-vsctl add-br brbm
- virsh net-list --all | grep brbm > /dev/null || virsh net-create $CONFIG/brbm-net.xml
- virsh net-list | grep -E "brbm\s+active" > /dev/null || virsh net-start brbm
- ovs-vsctl list-br | grep brbm1 > /dev/null || ovs-vsctl add-br brbm1
- virsh net-list --all | grep brbm1 > /dev/null || virsh net-create $CONFIG/brbm1-net.xml
- virsh net-list | grep -E "brbm1\s+active" > /dev/null || virsh net-start brbm1
+
+ # If flat we only use admin network
+ if [[ "$net_isolation_enabled" == "FALSE" ]]; then
+ virsh_enabled_networks="admin_network"
+ # For baremetal we only need to create/attach instack to admin and public
+ elif [ "$virtual" == "FALSE" ]; then
+ virsh_enabled_networks="admin_network public_network"
+ else
+ virsh_enabled_neworks=$enabled_network_list
+ fi
+
+ for network in ${OPNFV_NETWORK_TYPES}; do
+ ovs-vsctl list-br | grep ${NET_MAP[$network]} > /dev/null || ovs-vsctl add-br ${NET_MAP[$network]}
+ virsh net-list --all | grep ${NET_MAP[$network]} > /dev/null || virsh net-create $CONFIG/${NET_MAP[$network]}-net.xml
+ virsh net-list | grep -E "${NET_MAP[$network]}\s+active" > /dev/null || virsh net-start ${NET_MAP[$network]}
+ done
+
+ echo -e "${blue}INFO: Bridges set: ${reset}"
+ ovs-vsctl list-br
+ echo -e "${blue}INFO: virsh networks set: ${reset}"
+ virsh net-list
+
+ if [[ -z "$virtual" || "$virtual" == "FALSE" ]]; then
+ # bridge interfaces to correct OVS instances for baremetal deployment
+ for network in ${enabled_network_list}; do
+ this_interface=$(eval echo \${${network}_bridged_interface})
+ # check if this a bridged interface for this network
+ if [[ -n "$this_interface" || "$this_interface" != "none" ]]; then
+ ovs-vsctl list-ports ${NET_MAP[$network]} | grep ${this_interface} || ovs-vsctl add-port ${NET_MAP[$network]} ${this_interface}
+ else
+ echo "${red}ERROR: Unable to determine interface to bridge to for enabled network: ${network}${reset}"
+ exit 1
+ fi
+ done
+ fi
# ensure storage pool exists and is started
virsh pool-list --all | grep default > /dev/null || virsh pool-create $CONFIG/default-pool.xml
@@ -306,7 +456,26 @@ function setup_instack_vm {
#error: internal error: received hangup / error event on socket
#error: Reconnected to the hypervisor
- cp -f $RESOURCES/instack.qcow2 /var/lib/libvirt/images/instack.qcow2
+ instack_dst=/var/lib/libvirt/images/instack.qcow2
+ cp -f $RESOURCES/instack.qcow2 $instack_dst
+
+ # resize instack machine
+ echo "Checking if instack needs to be resized..."
+ instack_size=$(LIBGUESTFS_BACKEND=direct virt-filesystems --long -h --all -a $instack_dst |grep device | grep -Eo "[0-9\.]+G" | sed -n 's/\([0-9][0-9]*\).*/\1/p')
+ if [ "$instack_size" -lt 30 ]; then
+ qemu-img resize /var/lib/libvirt/images/instack.qcow2 +25G
+ LIBGUESTFS_BACKEND=direct virt-resize --expand /dev/sda1 $RESOURCES/instack.qcow2 $instack_dst
+ LIBGUESTFS_BACKEND=direct virt-customize -a $instack_dst --run-command 'xfs_growfs -d /dev/sda1 || true'
+ new_size=$(LIBGUESTFS_BACKEND=direct virt-filesystems --long -h --all -a $instack_dst |grep filesystem | grep -Eo "[0-9\.]+G" | sed -n 's/\([0-9][0-9]*\).*/\1/p')
+ if [ "$new_size" -lt 30 ]; then
+ echo "Error resizing instack machine, disk size is ${new_size}"
+ exit 1
+ else
+ echo "instack successfully resized"
+ fi
+ else
+ echo "skipped instack resize, upstream is large enough"
+ fi
else
echo "Found Instack VM, using existing VM"
@@ -374,11 +543,12 @@ function setup_instack_vm {
# extra space to overwrite the previous connectivity output
echo -e "${blue}\r ${reset}"
- #add the instack brbm1 interface
- virsh attach-interface --domain instack --type network --source brbm1 --model rtl8139 --config --live
- sleep 1
- ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "if ! ip a s eth2 | grep 192.168.37.1 > /dev/null; then ip a a 192.168.37.1/24 dev eth2; ip link set up dev eth2; fi"
-
+ #add the instack public interface if net isolation is enabled (more than just admin network)
+ if [[ "$net_isolation_enabled" == "TRUE" ]]; then
+ virsh attach-interface --domain instack --type network --source ${NET_MAP['public_network']} --model rtl8139 --config --live
+ sleep 1
+ ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "if ! ip a s eth2 | grep ${public_network_provisioner_ip} > /dev/null; then ip a a ${public_network_provisioner_ip}/${public_network_cidr##*/} dev eth2; ip link set up dev eth2; fi"
+ fi
# ssh key fix for stack user
ssh -T ${SSH_OPTIONS[@]} "root@$UNDERCLOUD" "restorecon -r /home/stack"
}
@@ -387,19 +557,34 @@ function setup_instack_vm {
##params: none
function setup_virtual_baremetal {
for i in $(seq 0 $vm_index); do
- if ! virsh list --all | grep baremetalbrbm_brbm1_${i} > /dev/null; then
- if [ ! -e $CONFIG/baremetalbrbm_brbm1_${i}.xml ]; then
- define_virtual_node baremetalbrbm_brbm1_${i}
+ if ! virsh list --all | grep baremetalbrbm_brbm1_brbm2_brbm3_${i} > /dev/null; then
+ if [ ! -e $CONFIG/baremetalbrbm_brbm1_brbm2_brbm3_${i}.xml ]; then
+ define_virtual_node baremetalbrbm_brbm1_brbm2_brbm3_${i}
fi
- virsh define $CONFIG/baremetalbrbm_brbm1_${i}.xml
+ # Fix for ramdisk using wrong pxeboot interface
+ # TODO: revisit this and see if there's a more proper fix
+ sed -i "/^\s*<source network='brbm2'\/>/{
+ N
+ s/^\(.*\)virtio\(.*\)$/\1rtl8139\2/
+ }" $CONFIG/baremetalbrbm_brbm1_brbm2_brbm3_${i}.xml
+ virsh define $CONFIG/baremetalbrbm_brbm1_brbm2_brbm3_${i}.xml
else
echo "Found Baremetal ${i} VM, using existing VM"
fi
- virsh vol-list default | grep baremetalbrbm_brbm1_${i} 2>&1> /dev/null || virsh vol-create-as default baremetalbrbm_brbm1_${i}.qcow2 40G --format qcow2
+ virsh vol-list default | grep baremetalbrbm_brbm1_brbm2_brbm3_${i} 2>&1> /dev/null || virsh vol-create-as default baremetalbrbm_brbm1_brbm2_brbm3_${i}.qcow2 40G --format qcow2
done
}
+##Set network-environment settings
+##params: network-environment file to edit
+function configure_network_environment {
+ sed -i '/ControlPlaneSubnetCidr/c\\ ControlPlaneSubnetCidr: "'${admin_network_cidr##*/}'"' $1
+ sed -i '/ControlPlaneDefaultRoute/c\\ ControlPlaneDefaultRoute: '${admin_network_provisioner_ip}'' $1
+ sed -i '/ExternalNetCidr/c\\ ExternalNetCidr: '${public_network_cidr}'' $1
+ sed -i "/ExternalAllocationPools/c\\ ExternalAllocationPools: [{'start': '${public_network_usable_ip_range%%,*}', 'end': '${public_network_usable_ip_range##*,}'}]" $1
+ sed -i '/ExternalInterfaceDefaultRoute/c\\ ExternalInterfaceDefaultRoute: '${public_network_gateway}'' $1
+}
##Copy over the glance images and instack json file
##params: none
function configure_undercloud {
@@ -407,7 +592,12 @@ function configure_undercloud {
echo
echo "Copying configuration file and disk images to instack"
scp ${SSH_OPTIONS[@]} $RESOURCES/overcloud-full.qcow2 "stack@$UNDERCLOUD":
- scp ${SSH_OPTIONS[@]} $NETENV "stack@$UNDERCLOUD":
+ if [[ "$net_isolation_enabled" == "TRUE" ]]; then
+ configure_network_environment $CONFIG/network-environment.yaml
+ echo -e "${blue}Network Environment set for Deployment: ${reset}"
+ cat $CONFIG/network-environment.yaml
+ scp ${SSH_OPTIONS[@]} $CONFIG/network-environment.yaml "stack@$UNDERCLOUD":
+ fi
scp ${SSH_OPTIONS[@]} -r $CONFIG/nics/ "stack@$UNDERCLOUD":
# ensure stack user on instack machine has an ssh key
@@ -427,7 +617,7 @@ data = json.load(open('$CONFIG/instackenv-virt.json'))
print data['nodes'][$i]['mac'][0]"
old_mac=$(python -c "$pyscript")
- new_mac=$(virsh dumpxml baremetalbrbm_brbm1_$i | grep "mac address" | cut -d = -f2 | grep -Eo "[0-9a-f:]+")
+ new_mac=$(virsh dumpxml baremetalbrbm_brbm1_brbm2_brbm3_$i | grep "mac address" | cut -d = -f2 | grep -Eo "[0-9a-f:]+")
# this doesn't work with multiple vnics on the vms
#if [ "$old_mac" != "$new_mac" ]; then
# echo "${blue}Modifying MAC for node from $old_mac to ${new_mac}${reset}"
@@ -437,7 +627,6 @@ print data['nodes'][$i]['mac'][0]"
DEPLOY_OPTIONS+=" --libvirt-type qemu"
INSTACKENV=$CONFIG/instackenv-virt.json
- NETENV=$CONFIG/network-environment.yaml
# upload instackenv file to Instack for virtual deployment
scp ${SSH_OPTIONS[@]} $INSTACKENV "stack@$UNDERCLOUD":instackenv.json
@@ -465,7 +654,7 @@ EOI
echo "Running undercloud configuration."
echo "Logging undercloud configuration to instack:/home/stack/apex-undercloud-install.log"
ssh -T ${SSH_OPTIONS[@]} "stack@$UNDERCLOUD" << EOI
-if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
+if [[ "$net_isolation_enabled" == "TRUE" ]]; then
sed -i 's/#local_ip/local_ip/' undercloud.conf
sed -i 's/#network_gateway/network_gateway/' undercloud.conf
sed -i 's/#network_cidr/network_cidr/' undercloud.conf
@@ -474,25 +663,28 @@ if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
sed -i 's/#inspection_iprange/inspection_iprange/' undercloud.conf
sed -i 's/#undercloud_debug/undercloud_debug/' undercloud.conf
- openstack-config --set undercloud.conf DEFAULT local_ip ${deploy_options_array['instack_ip']}/${deploy_options_array['provisioning_cidr']##*/}
- openstack-config --set undercloud.conf DEFAULT network_gateway ${deploy_options_array['provisioning_gateway']}
- openstack-config --set undercloud.conf DEFAULT network_cidr ${deploy_options_array['provisioning_cidr']}
- openstack-config --set undercloud.conf DEFAULT dhcp_start ${deploy_options_array['provisioning_dhcp_start']}
- openstack-config --set undercloud.conf DEFAULT dhcp_end ${deploy_options_array['provisioning_dhcp_end']}
- openstack-config --set undercloud.conf DEFAULT inspection_iprange ${deploy_options_array['provisioning_inspection_iprange']}
+ openstack-config --set undercloud.conf DEFAULT local_ip ${admin_network_provisioner_ip}/${admin_network_cidr##*/}
+ openstack-config --set undercloud.conf DEFAULT network_gateway ${admin_network_provisioner_ip}
+ openstack-config --set undercloud.conf DEFAULT network_cidr ${admin_network_cidr}
+ openstack-config --set undercloud.conf DEFAULT dhcp_start ${admin_network_dhcp_range%%,*}
+ openstack-config --set undercloud.conf DEFAULT dhcp_end ${admin_network_dhcp_range##*,}
+ openstack-config --set undercloud.conf DEFAULT inspection_iprange ${admin_network_introspection_range}
openstack-config --set undercloud.conf DEFAULT undercloud_debug false
-
- if [ -n "$net_isolation_enabled" ]; then
- sed -i '/ControlPlaneSubnetCidr/c\\ ControlPlaneSubnetCidr: "${deploy_options_array['provisioning_cidr']##*/}"' network-environment.yaml
- sed -i '/ControlPlaneDefaultRoute/c\\ ControlPlaneDefaultRoute: ${deploy_options_array['provisioning_gateway']}' network-environment.yaml
- sed -i '/ExternalNetCidr/c\\ ExternalNetCidr: ${deploy_options_array['ext_net_cidr']}' network-environment.yaml
- sed -i '/ExternalAllocationPools/c\\ ExternalAllocationPools: [{'start': '${deploy_options_array['ext_allocation_pool_start']}', 'end': '${deploy_options_array['ext_allocation_pool_end']}'}]' network-environment.yaml
- sed -i '/ExternalInterfaceDefaultRoute/c\\ ExternalInterfaceDefaultRoute: ${deploy_options_array['ext_gateway']}' network-environment.yaml
- fi
fi
openstack undercloud install &> apex-undercloud-install.log
+sleep 30
+sudo systemctl restart openstack-glance-api
+sudo systemctl restart openstack-nova-conductor
+sudo systemctl restart openstack-nova-compute
EOI
+# WORKAROUND: must restart the above services to fix sync problem with nova compute manager
+# TODO: revisit and file a bug if necessary. This should eventually be removed
+# as well as glance api problem
+echo -e "${blue}INFO: Sleeping 15 seconds while services come back from restart${reset}"
+sleep 15
+#TODO Fill in the rest of the network-environment values for other networks
+
}
##preping it for deployment and launch the deploy
@@ -518,11 +710,11 @@ function undercloud_prep_overcloud_deploy {
fi
if [[ "$net_isolation_enabled" == "TRUE" ]]; then
- DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/network-isolation.yaml"
+ #DEPLOY_OPTIONS+=" -e /usr/share/openstack-tripleo-heat-templates/environments/network-isolation.yaml"
DEPLOY_OPTIONS+=" -e network-environment.yaml"
fi
- if [[ "$ha_enabled" == "TRUE" ]] || [[ $net_isolation_enabled == "TRUE" ]]; then
+ if [[ "$ha_enabled" == "TRUE" ]] || [[ "$net_isolation_enabled" == "TRUE" ]]; then
DEPLOY_OPTIONS+=" --ntp-server $ntp_server"
fi
@@ -567,7 +759,7 @@ display_usage() {
echo -e " -c|--config : Directory to configuration files. Optional. Defaults to /var/opt/opnfv/ \n"
echo -e " -d|--deploy-settings : Full path to deploy settings yaml file. Optional. Defaults to null \n"
echo -e " -i|--inventory : Full path to inventory yaml file. Required only for baremetal \n"
- echo -e " -n|--netenv : Full path to network environment file. Optional. Defaults to \$CONFIG/network-environment.yaml \n"
+ echo -e " -n|--net-settings : Full path to network settings file. Optional. \n"
echo -e " -p|--ping-site : site to use to verify IP connectivity. Optional. Defaults to 8.8.8.8 \n"
echo -e " -r|--resources : Directory to deployment resources. Optional. Defaults to /var/opt/opnfv/stack \n"
echo -e " -v|--virtual : Virtualize overcloud nodes instead of using baremetal. \n"
@@ -604,8 +796,9 @@ parse_cmdline() {
INVENTORY_FILE=$2
shift 2
;;
- -n|--netenv)
- NETENV=$2
+ -n|--net-settings)
+ NETSETS=$2
+ echo "Network Settings Configuration file: $2"
shift 2
;;
-p|--ping-site)
@@ -640,11 +833,10 @@ parse_cmdline() {
esac
done
- if [[ ! -z "$NETENV" && "$net_isolation_enabled" == "FALSE" ]]; then
- echo -e "${red}INFO: Single flat network requested. Ignoring any netenv settings!${reset}"
- elif [[ ! -z "$NETENV" && ! -z "$DEPLOY_SETTINGS_FILE" ]]; then
- echo -e "${red}WARN: deploy_settings and netenv specified. Ignoring netenv settings! deploy_settings will contain \
-netenv${reset}"
+ if [[ ! -z "$NETSETS" && "$net_isolation_enabled" == "FALSE" ]]; then
+ echo -e "${red}INFO: Single flat network requested. Ignoring any network settings!${reset}"
+ elif [[ -z "$NETSETS" && "$net_isolation_enabled" == "TRUE" ]]; then
+ echo -e "${red}ERROR: You must provide a network_settings file with -n or use --flat to force a single flat network{reset}"
fi
if [[ -n "$virtual" && -n "$INVENTORY_FILE" ]]; then
@@ -657,8 +849,8 @@ netenv${reset}"
exit 1
fi
- if [[ ! -z "$NETENV" && ! -f "$NETENV" ]]; then
- echo -e "${red}ERROR: ${NETENV} does not exist! Exiting...${reset}"
+ if [[ ! -z "$NETSETS" && ! -f "$NETSETS" ]]; then
+ echo -e "${red}ERROR: ${NETSETS} does not exist! Exiting...${reset}"
exit 1
fi
@@ -677,8 +869,13 @@ netenv${reset}"
main() {
parse_cmdline "$@"
+ if [[ "$net_isolation_enabled" == "TRUE" ]]; then
+ echo -e "${blue}INFO: Parsing network settings file...${reset}"
+ parse_network_settings
+ fi
if ! configure_deps; then
- echo "Dependency Validation Failed, Exiting."
+ echo -e "${red}Dependency Validation Failed, Exiting.${reset}"
+ exit 1
fi
if [ -n "$DEPLOY_SETTINGS_FILE" ]; then
parse_deploy_settings
diff --git a/config/deploy/deploy_settings.yaml b/config/deploy/deploy_settings.yaml
index 52d39130..15157f12 100644
--- a/config/deploy/deploy_settings.yaml
+++ b/config/deploy/deploy_settings.yaml
@@ -1,28 +1,7 @@
global_params:
ha_enabled: true
- network_isolation_settings: network/network-environment-example.yaml
deploy_options:
- # instack_ip
- # IP address given to instack on the provisioning network
- instack_ip: 192.0.2.1
- # CIDR of provisioning network
- provisioning_cidr: 192.0.2.0/24
- # gateway IP of provisioning network
- provisioning_gateway: 192.0.2.1
- # IP pool start used for provisioning overcloud nodes
- provisioning_dhcp_start: 192.0.2.5
- # IP pool end used for inspecting overcloud nodes
- provisioning_dhcp_end: 192.0.2.24
- # IP pool used for inspecting overcloud nodes on the provisioning network
- provisioning_inspection_iprange: 192.0.2.100,192.0.2.124
sdn_controller: opendaylight
tacker: false
congress: false
- # CIDR used to for the external network
- ext_net_cidr: 192.168.37.0/24
- # Allocation pools for floating ip addresses on the ext net
- ext_allocation_pool_start: 192.168.37.50
- ext_allocation_pool_end: 192.168.37.99
- # Default Gateway for External Network
- ext_gateway: 192.168.37.1
diff --git a/config/deploy/network/network-environment-example.yaml b/config/deploy/network/network-environment-example.yaml
deleted file mode 100644
index f6c101fa..00000000
--- a/config/deploy/network/network-environment-example.yaml
+++ /dev/null
@@ -1,71 +0,0 @@
-resource_registry:
- OS::TripleO::BlockStorage::Net::SoftwareConfig: /home/stack/nic-configs/cinder-storage.yaml
- OS::TripleO::Compute::Net::SoftwareConfig: /home/stack/nic-configs/compute.yaml
- OS::TripleO::Controller::Net::SoftwareConfig: /home/stack/nic-configs/controller.yaml
- OS::TripleO::ObjectStorage::Net::SoftwareConfig: /home/stack/nic-configs/swift-storage.yaml
- OS::TripleO::CephStorage::Net::SoftwareConfig: /home/stack/nic-configs/ceph-storage.yaml
-
-parameter_defaults:
- # Customize all these values to match the local environment
- InternalApiNetCidr: 172.17.0.0/24
- StorageNetCidr: 172.18.0.0/24
- StorageMgmtNetCidr: 172.19.0.0/24
- TenantNetCidr: 172.16.0.0/24
- ExternalNetCidr: 10.1.2.0/24
- # CIDR subnet mask length for provisioning network
- ControlPlaneSubnetCidr: 24
- InternalApiAllocationPools: [{'start': '172.17.0.10', 'end': '172.17.0.200'}]
- StorageAllocationPools: [{'start': '172.18.0.10', 'end': '172.18.0.200'}]
- StorageMgmtAllocationPools: [{'start': '172.19.0.10', 'end': '172.19.0.200'}]
- TenantAllocationPools: [{'start': '172.16.0.10', 'end': '172.16.0.200'}]
- # Use an External allocation pool which will leave room for floating IPs
- ExternalAllocationPools: [{'start': '10.1.2.10', 'end': '10.1.2.50'}]
- # Set to the router gateway on the external network
- ExternalInterfaceDefaultRoute: 10.1.2.1
- # Gateway router for the provisioning network (or Undercloud IP)
- ControlPlaneDefaultRoute: 192.0.2.254
- # Generally the IP of the Undercloud
- EC2MetadataIp: 192.0.2.1
- # Define the DNS servers (maximum 2) for the overcloud nodes
- DnsServers: ["8.8.8.8","8.8.4.4"]
- InternalApiNetworkVlanID: 201
- StorageNetworkVlanID: 202
- StorageMgmtNetworkVlanID: 203
- TenantNetworkVlanID: 204
- ExternalNetworkVlanID: 100
- # May set to br-ex if using floating IPs only on native VLAN on bridge br-ex
- NeutronExternalNetworkBridge: "''"
- # Customize bonding options if required (ignored if bonds are not used)
- BondInterfaceOvsOptions:
- "bond_mode=balance-tcp lacp=active other-config:lacp-fallback-ab=true"
-
- ServiceNetMap:
- NeutronTenantNetwork: tenant
- CeilometerApiNetwork: internal_api
- MongoDbNetwork: internal_api
- CinderApiNetwork: internal_api
- CinderIscsiNetwork: storage
- GlanceApiNetwork: storage
- GlanceRegistryNetwork: internal_api
- KeystoneAdminApiNetwork: internal_api
- KeystonePublicApiNetwork: internal_api
- NeutronApiNetwork: internal_api
- HeatApiNetwork: internal_api
- NovaApiNetwork: internal_api
- NovaMetadataNetwork: internal_api
- NovaVncProxyNetwork: internal_api
- SwiftMgmtNetwork: storage_mgmt
- SwiftProxyNetwork: storage
- HorizonNetwork: internal_api
- MemcachedNetwork: internal_api
- RabbitMqNetwork: internal_api
- RedisNetwork: internal_api
- MysqlNetwork: internal_api
- CephClusterNetwork: storage_mgmt
- CephPublicNetwork: storage
- # Define which network will be used for hostname resolution
- ControllerHostnameResolveNetwork: internal_api
- ComputeHostnameResolveNetwork: internal_api
- BlockStorageHostnameResolveNetwork: internal_api
- ObjectStorageHostnameResolveNetwork: internal_api
- CephStorageHostnameResolveNetwork: storage
diff --git a/config/deploy/network/network_settings.yaml b/config/deploy/network/network_settings.yaml
new file mode 100644
index 00000000..2560cc5d
--- /dev/null
+++ b/config/deploy/network/network_settings.yaml
@@ -0,0 +1,53 @@
+# Defines Network Environment for a Baremetal Deployment
+# Any values missing will be auto-detected on the jumphost
+admin_network:
+ enabled: true
+ network_type: bridged
+ bridged_interface: ''
+ bond_interfaces: ''
+ vlan: native
+ usable_ip_range: 192.0.2.11,192.0.2.99
+ gateway: 192.0.2.1
+ provisioner_ip: 192.0.2.1
+ cidr: 192.0.2.0/24
+ dhcp_range: 192.0.2.2,192.0.2.10
+ introspection_range: 192.0.2.100,192.0.2.120
+private_network:
+ enabled: false
+public_network:
+ enabled: true
+ network_type: ''
+ bridged_interface: ''
+ cidr: 192.168.37.0/24
+ gateway: 192.168.37.1
+ floating_ip_range: 192.168.37.200,192.168.37.220
+ usable_ip_range: 192.168.37.10,192.168.37.199
+ provisioner_ip: 192.168.37.1
+storage_network:
+ enabled: false
+
+#admin_network: #Required network, other networks can collapse into this network if not enabled
+# enabled: true
+# network_type: bridged #Indicates if this network will be bridged to an interface, or to a bond
+# bridged_interface: '' #Interface to bridge to for installer VM
+# bond_interfaces: '' #Interfaces to create bond with for installer VM
+# vlan: native #VLAN tag to use, native means none
+# usable_ip_range: 192.0.2.11,192.0.2.99 #Usable ip range, if empty entire range is usable, ex. 192.168.1.10,192.168.1.20
+# gateway: 192.0.2.1 #Gateway (only needed when public_network is disabled), if empty it is auto-detected
+# provisioner_ip: 192.0.2.1 #installer VM IP, if empty it is the next available IP in the admin subnet
+# cidr: 192.0.2.0/24 #subnet in CIDR format 192.168.1.0/24, if empty it will be auto-detected
+# dhcp_range: 192.0.2.2,192.0.2.10 #dhcp range for the admin network, if empty it will be automatically provisioned
+# introspection_range: 192.0.2.100,192.0.2.120 #Range used for introspection phase (examining nodes)
+#private_network: #Network for internal API traffic for O/S services and internal tenant traffic
+# enabled: false #If disabled, internal api traffic will collapse to admin_network
+#public_network: #Network for external API traffic and external tenant traffic
+# enabled: true #If disabled, public_network traffic will collapse to admin network
+# network_type: ''
+# bridged_interface: ''
+# cidr: 192.168.37.0/24
+# gateway: 192.168.37.1
+# floating_ip_range: 192.168.37.200,192.168.37.220 #Range to allocate to floating IPs for the public network with Neutron
+# usable_ip_range: 192.168.37.10,192.168.37.199 #Usable IP range on the public network, usually this is a shared subnet
+# provisioner_ip: 192.168.37.1
+#storage_network: #Network for Ceph storage traffic
+# enabled: false #If disabled, storage_network traffic will collapse to admin network
diff --git a/config/inventory/intel_pod2_settings.yaml b/config/inventory/intel_pod2_settings.yaml
index 4545839f..6058209d 100644
--- a/config/inventory/intel_pod2_settings.yaml
+++ b/config/inventory/intel_pod2_settings.yaml
@@ -5,7 +5,7 @@ nodes:
ipmi_user: root
ipmi_pass: root
cpus: 2
- memory: 2048
+ memory: 8192
disk: 40
arch: "x86_64"
capabilities: "profile:control"
@@ -15,27 +15,27 @@ nodes:
ipmi_user: root
ipmi_pass: root
cpus: 2
- memory: 2048
+ memory: 8192
disk: 40
arch: "x86_64"
capabilities: "profile:control"
node3:
- mac_address: "00:1e:67:4f:cc:f1"
+ mac_address: "00:1e:67:4f:cc:0b"
ipmi_ip: 10.4.7.4
ipmi_user: root
ipmi_pass: root
cpus: 2
- memory: 2048
+ memory: 8192
disk: 40
arch: "x86_64"
capabilities: "profile:control"
node4:
- mac_address: "00:1e:67:4f:cc:0b"
+ mac_address: "00:1e:67:4f:cc:f1"
ipmi_ip: 10.4.7.5
ipmi_user: root
ipmi_pass: root
cpus: 2
- memory: 2048
+ memory: 8192
disk: 40
arch: "x86_64"
capabilities: "profile:compute"
@@ -45,7 +45,7 @@ nodes:
ipmi_user: root
ipmi_pass: root
cpus: 2
- memory: 2048
+ memory: 8192
disk: 40
arch: "x86_64"
capabilities: "profile:compute"
diff --git a/lib/common-functions.sh b/lib/common-functions.sh
new file mode 100644
index 00000000..9aa97e87
--- /dev/null
+++ b/lib/common-functions.sh
@@ -0,0 +1,314 @@
+#!/usr/bin/env bash
+# Common Functions used by OPNFV Apex
+# author: Tim Rozet (trozet@redhat.com)
+
+##find ip of interface
+##params: interface name
+function find_ip {
+ ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
+}
+
+##finds subnet of ip and netmask
+##params: ip, netmask
+function find_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ IFS=. read -r m1 m2 m3 m4 <<< "$2"
+ printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
+}
+
+##verify subnet has at least n IPs
+##params: subnet mask, n IPs
+function verify_subnet_size {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ num_ips_required=$2
+
+ ##this function assumes you would never need more than 254
+ ##we check here to make sure
+ if [ "$num_ips_required" -ge 254 ]; then
+ echo -e "\n\n${red}ERROR: allocating more than 254 IPs is unsupported...Exiting${reset}\n\n"
+ return 1
+ fi
+
+ ##we just return if 3rd octet is not 255
+ ##because we know the subnet is big enough
+ if [ "$i3" -ne 255 ]; then
+ return 0
+ elif [ $((254-$i4)) -ge "$num_ips_required" ]; then
+ return 0
+ else
+ echo -e "\n\n${red}ERROR: Subnet is too small${reset}\n\n"
+ return 1
+ fi
+}
+
+##finds last usable ip (broadcast minus 1) of a subnet from an IP and netmask
+## Warning: This function only works for IPv4 at the moment.
+##params: ip, netmask
+function find_last_ip_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ IFS=. read -r m1 m2 m3 m4 <<< "$2"
+ IFS=. read -r s1 s2 s3 s4 <<< "$((i1 & m1)).$((i2 & m2)).$((i3 & m3)).$((i4 & m4))"
+ printf "%d.%d.%d.%d\n" "$((255 - $m1 + $s1))" "$((255 - $m2 + $s2))" "$((255 - $m3 + $s3))" "$((255 - $m4 + $s4 - 1))"
+}
+
+##increments subnet by a value
+##params: ip, value
+##assumes low value
+function increment_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 | $2))"
+}
+
+##finds netmask of interface
+##params: interface
+##returns long format 255.255.x.x
+function find_netmask {
+ ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
+}
+
+##finds short netmask of interface
+##params: interface
+##returns short format, ex: /21
+function find_short_netmask {
+ echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
+}
+
+##increments next IP
+##params: ip
+##assumes a /24 subnet
+function next_ip {
+ baseaddr="$(echo $1 | cut -d. -f1-3)"
+ lsv="$(echo $1 | cut -d. -f4)"
+ if [ "$lsv" -ge 254 ]; then
+ return 1
+ fi
+ ((lsv++))
+ echo $baseaddr.$lsv
+}
+
+##subtracts a value from an IP address
+##params: last ip, ip_count
+##assumes ip_count is less than the last octect of the address
+subtract_ip() {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ ip_count=$2
+ if [ $i4 -lt $ip_count ]; then
+ echo -e "\n\n${red}ERROR: Can't subtract $ip_count from IP address $1 Exiting${reset}\n\n"
+ exit 1
+ fi
+ printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 - $ip_count ))"
+}
+
+##check if IP is in use
+##params: ip
+##ping ip to get arp entry, then check arp
+function is_ip_used {
+ ping -c 5 $1 > /dev/null 2>&1
+ arp -n | grep "$1 " | grep -iv incomplete > /dev/null 2>&1
+}
+
+##find next usable IP
+##params: ip
+function next_usable_ip {
+ new_ip=$(next_ip $1)
+ while [ "$new_ip" ]; do
+ if ! is_ip_used $new_ip; then
+ echo $new_ip
+ return 0
+ fi
+ new_ip=$(next_ip $new_ip)
+ done
+ return 1
+}
+
+##increment ip by value
+##params: ip, amount to increment by
+##increment_ip $next_private_ip 10
+function increment_ip {
+ baseaddr="$(echo $1 | cut -d. -f1-3)"
+ lsv="$(echo $1 | cut -d. -f4)"
+ incrval=$2
+ lsv=$((lsv+incrval))
+ if [ "$lsv" -ge 254 ]; then
+ return 1
+ fi
+ echo $baseaddr.$lsv
+}
+
+##finds gateway on system
+##params: interface to validate gateway on (optional)
+##find_gateway em1
+function find_gateway {
+ local gw gw_interface
+ gw=$(ip route | grep default | awk '{print $3}')
+ gw_interface=$(ip route get $gw | awk '{print $3}')
+ if [ -n "$1" ]; then
+ if [ "$gw_interface" == "$1" ]; then
+ echo ${gw}
+ fi
+ fi
+}
+
+##finds subnet in CIDR notation for interface
+##params: interface to find CIDR
+function find_cidr {
+ local cidr network ip netmask short_mask
+ ip=$(find_ip $1)
+ netmask=$(find_netmask $1)
+ if [[ -z "$ip" || -z "$netmask" ]]; then
+ return 1
+ fi
+ network=$(find_subnet ${ip} ${netamsk})
+ short_mask=$(find_short_netmask $1)
+ if [[ -z "$network" || -z "$short_mask" ]]; then
+ return 1
+ fi
+ cidr="${subnet}'\'${short_mask}"
+ echo ${cidr}
+}
+
+##finds block of usable IP addresses for an interface
+##simply returns at the moment the correct format
+##after first 20 IPs, and leave 20 IPs at end of subnet (for floating ips, etc)
+##params: interface to find IP
+function find_usable_ip_range {
+ local interface_ip subnet_mask first_block_ip last_block_ip
+ interface_ip=$(find_ip $1)
+ subnet_mask=$(find_netmask $1)
+ if [[ -z "$interface_ip" || -z "$subnet_mask" ]]; then
+ return 1
+ fi
+ interface_ip=$(increment_ip ${interface_ip} 20)
+ first_block_ip=$(next_usable_ip ${interface_ip})
+ if [ -z "$first_block_ip" ]; then
+ return 1
+ fi
+ last_block_ip=$(find_last_ip_subnet ${interface_ip} ${subnet_mask})
+ if [ -z "$last_block_ip" ]; then
+ return 1
+ else
+ last_block_ip=$(subtract_ip ${last_block_ip} 20)
+ echo "${first_block_ip},${last_block_ip}"
+ fi
+
+}
+
+##generates usable IP range in correct format based on CIDR
+##assumes the first 20 IPs are used (by instack or otherwise)
+##params: cidr
+function generate_usable_ip_range {
+ local first_ip first_block_ip last_block_ip
+ first_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
+ first_block_ip=$(increment_ip ${first_ip} 20)
+ last_block_ip=$(ipcalc -nb $1 | grep HostMax: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
+ if [[ -z "$first_block_ip" || -z "$last_block_ip" ]]; then
+ return 1
+ else
+ last_block_ip=$(subtract_ip ${last_block_ip} 20)
+ echo "${first_block_ip},${last_block_ip}"
+ fi
+}
+
+##find the instack IP address
+##finds first usable IP on subnet
+##params: interface
+function find_provisioner_ip {
+ local interface_ip
+ interface_ip=$(find_ip $1)
+ if [ -z "$interface_ip" ]; then
+ return 1
+ fi
+ echo $(increment_ip ${interface_ip} 1)
+}
+
+##generates instack IP address based on CIDR
+##params: cidr
+function generate_provisioner_ip {
+ local provisioner_ip
+ provisioner_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
+}
+
+##finds the dhcp range available via interface
+##uses first 8 IPs, after 2nd IP
+##params: interface
+function find_dhcp_range {
+ local dhcp_range_start dhcp_range_end interface_ip
+ interface_ip=$(find_ip $1)
+ if [ -z "$interface_ip" ]; then
+ return 1
+ fi
+ dhcp_range_start=$(increment_ip ${interface_ip} 2)
+ dhcp_range_end=$(increment_ip ${dhcp_range_start} 8)
+ echo "${dhcp_range_start},${dhcp_range_end}"
+}
+
+##generates the dhcp range available via CIDR
+##uses first 8 IPs, after 1st IP
+##params: cidr
+function generate_dhcp_range {
+ local dhcp_range_start dhcp_range_end first_ip
+ first_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
+ if [ -z "$first_ip" ]; then
+ return 1
+ fi
+ dhcp_range_start=$(increment_ip ${first_ip} 1)
+ dhcp_range_end=$(increment_ip ${dhcp_range_start} 8)
+ echo "${dhcp_range_start},${dhcp_range_end}"
+}
+
+##finds the introspection range available via interface
+##uses 8 IPs, after the first 10 IPs
+##params: interface
+function find_introspection_range {
+ local inspect_range_start inspect_range_end interface_ip
+ interface_ip=$(find_ip $1)
+ if [ -z "$interface_ip" ]; then
+ return 1
+ fi
+ inspect_range_start=$(increment_ip ${interface_ip} 10)
+ inspect_range_end=$(increment_ip ${inspect_range_start} 8)
+ echo "${inspect_range_start},${inspect_range_end}"
+}
+
+##generate the introspection range available via CIDR
+##uses 8 IPs, after the first 10 IPs
+##params: cidr
+function generate_introspection_range {
+ local inspect_range_start inspect_range_end first_ip
+ first_ip=$(ipcalc -nb $1 | grep HostMin: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
+ if [ -z "$first_ip" ]; then
+ return 1
+ fi
+ inspect_range_start=$(increment_ip ${first_ip} 10)
+ inspect_range_end=$(increment_ip ${inspect_range_start} 8)
+ echo "${inspect_range_start},${inspect_range_end}"
+}
+
+##finds the floating ip range available via interface
+##uses last 20 IPs of a subnet
+##params: interface
+function find_floating_ip_range {
+ local float_range_start float_range_end interface_ip subnet_mask
+ interface_ip=$(find_ip $1)
+ subnet_mask=$(find_netmask $1)
+ if [[ -z "$interface_ip" || -z "$subnet_mask" ]]; then
+ return 1
+ fi
+ float_range_end=$(find_last_ip_subnet ${interface_ip} ${subnet_mask})
+ float_range_start=$(subtract_ip ${float_range_end} 19)
+ echo "${float_range_start},${float_range_end}"
+}
+
+##generate the floating range available via CIDR
+##uses last 20 IPs of subnet
+##params: cidr
+function generate_floating_ip_range {
+ local float_range_start float_range_end last_ip
+ last_ip=$(ipcalc -nb $1 | grep HostMax: | grep -Eo "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+")
+ if [ -z "$last_ip" ]; then
+ return 1
+ fi
+ float_range_start=$(subtract_ip ${last_ip} 19)
+ float_range_end=${last_ip}
+ echo "${float_range_start},${float_range_end}"
+}