Revert "Restructured the installation-instruction file into indexed sub files"

This reverts commit f479b77c4f7c0d11196e3902bb7e60ff8e34a1fe.

Change-Id: I02b0d6e9f802765fe5a773547b8c43a10b260755

1 files changed, 0 insertions, 66 deletions

diff --git a/docs/installation-instructions/requirements.rst b/docs/installation-instructions/requirements.rst
deleted file mode 100644
index 46dca2a0..00000000
--- a/docs/installation-instructions/requirements.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-Setup Requirements
-==================
-
-Jumphost Requirements
----------------------
-
-The Jumphost requirements are outlined below:
-
-1.     CentOS 7 (from ISO or self-installed).
-
-2.     Root access.
-
-3.     libvirt virtualization support.
-
-4.     minimum 2 networks and maximum 6 networks, multiple NIC and/or VLAN combinations are supported.
-       This is virtualized for a VM deployment.
-
-5.     The Bramaputra Apex RPM.
-
-6.     16 GB of RAM for a bare metal deployment, 56 GB of RAM for a VM deployment.
-
-Network Requirements
---------------------
-
-Network requirements include:
-
-1.     No DHCP or TFTP server running on networks used by OPNFV.
-
-2.     2-6 separate networks with connectivity between Jumphost and nodes.
-
-       -  Control Plane Network (Provisioning)
-
-       -  Private / Internal Network*
-
-       -  External Network
-
-       -  Storage Network*
-
-3.     Lights out OOB network access from Jumphost with IPMI node enabled (bare metal deployment only).
-
-4.     Admin or public network has Internet access, meaning a gateway and DNS availability.
-
-| `*` *These networks can be combined with each other or all combined on the Control Plane network.*
-| `*` *Non-External networks will be consolidated to the Control Plane network if not specifically configured.*
-
-Bare Metal Node Requirements
-----------------------------
-
-Bare metal nodes require:
-
-1.     IPMI enabled on OOB interface for power control.
-
-2.     BIOS boot priority should be PXE first then local hard disk.
-
-3.     BIOS PXE interface should include Control Plane network mentioned above.
-
-Execution Requirements (Bare Metal Only)
-----------------------------------------
-
-In order to execute a deployment, one must gather the following information:
-
-1.     IPMI IP addresses for the nodes.
-
-2.     IPMI login information for the nodes (user/pass).
-
-3.     MAC address of Control Plane / Provisioning interfaces of the overcloud nodes.