From bffb8e0e27f21934a4bbb1138427f2adda6c583d Mon Sep 17 00:00:00 2001 From: Tim Rozet Date: Wed, 20 Jan 2016 01:09:31 +0000 Subject: Revert "Restructured the installation-instruction file into indexed sub files" This reverts commit f479b77c4f7c0d11196e3902bb7e60ff8e34a1fe. Change-Id: I02b0d6e9f802765fe5a773547b8c43a10b260755 --- docs/installation-instructions/requirements.rst | 66 ------------------------- 1 file changed, 66 deletions(-) delete mode 100644 docs/installation-instructions/requirements.rst (limited to 'docs/installation-instructions/requirements.rst') diff --git a/docs/installation-instructions/requirements.rst b/docs/installation-instructions/requirements.rst deleted file mode 100644 index 46dca2a0..00000000 --- a/docs/installation-instructions/requirements.rst +++ /dev/null @@ -1,66 +0,0 @@ -Setup Requirements -================== - -Jumphost Requirements ---------------------- - -The Jumphost requirements are outlined below: - -1. CentOS 7 (from ISO or self-installed). - -2. Root access. - -3. libvirt virtualization support. - -4. minimum 2 networks and maximum 6 networks, multiple NIC and/or VLAN combinations are supported. - This is virtualized for a VM deployment. - -5. The Bramaputra Apex RPM. - -6. 16 GB of RAM for a bare metal deployment, 56 GB of RAM for a VM deployment. - -Network Requirements --------------------- - -Network requirements include: - -1. No DHCP or TFTP server running on networks used by OPNFV. - -2. 2-6 separate networks with connectivity between Jumphost and nodes. - - - Control Plane Network (Provisioning) - - - Private / Internal Network* - - - External Network - - - Storage Network* - -3. Lights out OOB network access from Jumphost with IPMI node enabled (bare metal deployment only). - -4. Admin or public network has Internet access, meaning a gateway and DNS availability. - -| `*` *These networks can be combined with each other or all combined on the Control Plane network.* -| `*` *Non-External networks will be consolidated to the Control Plane network if not specifically configured.* - -Bare Metal Node Requirements ----------------------------- - -Bare metal nodes require: - -1. IPMI enabled on OOB interface for power control. - -2. BIOS boot priority should be PXE first then local hard disk. - -3. BIOS PXE interface should include Control Plane network mentioned above. - -Execution Requirements (Bare Metal Only) ----------------------------------------- - -In order to execute a deployment, one must gather the following information: - -1. IPMI IP addresses for the nodes. - -2. IPMI login information for the nodes (user/pass). - -3. MAC address of Control Plane / Provisioning interfaces of the overcloud nodes. -- cgit 1.2.3-korg