1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
# List of networks, used for j2 templating of enabled networks
#
# Supported values:
#
# name: Name of the network (mandatory)
# name_lower: lowercase version of name used for filenames
# (optional, defaults to name.lower())
# enabled: Is the network enabled (optional, defaults to true)
# vlan: vlan for the network (optional)
# vip: Enable creation of a virtual IP on this network
# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64'
# (optional, may use parameter defaults instead)
# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}]
# gateway_ip: gateway for the network (optional, may use parameter defaults)
# ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined.
# ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools
# are already defined.
# ipv6_gateway: Set an IPv6 gateway if IPv4 gateway already defined.
# ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only.
# NOTE: IP-related values set parameter defaults in templates, may be overridden,
# either by operators, or e.g in environments/network-isolation-v6.yaml where we
# set some default IPv6 addresses.
# compat_name: for existing stack you may need to override the default
# transformation for the resource's name.
#
# Example:
# - name Example
# vip: false
# ip_subnet: '10.0.2.0/24'
# allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}]
# gateway_ip: '10.0.2.254'
#
# To support backward compatility, two versions of the network definitions will
# be created, network/<network>.yaml and network/<network>_v6.yaml. Only
# one of these files may be used in the deployment at a time, since the
# parameters used for configuration are the same in both files. In the
# future, this behavior may be changed to create only one file for custom
# networks. You may specify IPv6 addresses for ip_subnet, allocation_pools,
# and gateway_ip if no IPv4 addresses are used for a custom network, or set
# ipv6: true, and the network/<network>.yaml file will be configured as IPv6.
#
# For configuring both IPv4 and IPv6 on the same interface, use two separate
# networks, and then assign both IPs in the custom NIC configuration templates.
- name: External
vip: true
name_lower: external
ip_subnet: '10.0.0.0/24'
allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}]
gateway_ip: '10.0.0.1'
ipv6_subnet: '2001:db8:fd00:1000::/64'
ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}]
gateway_ipv6: '2001:db8:fd00:1000::1'
- name: InternalApi
name_lower: internal_api
vip: true
ip_subnet: '172.16.2.0/24'
allocation_pools: [{'start': '172.16.2.4', 'end': '172.16.2.250'}]
ipv6_subnet: 'fd00:fd00:fd00:2000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}]
compat_name: Internal
- name: Storage
vip: true
name_lower: storage
ip_subnet: '172.16.1.0/24'
allocation_pools: [{'start': '172.16.1.4', 'end': '172.16.1.250'}]
ipv6_subnet: 'fd00:fd00:fd00:3000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}]
- name: StorageMgmt
name_lower: storage_mgmt
vip: true
ip_subnet: '172.16.3.0/24'
allocation_pools: [{'start': '172.16.3.4', 'end': '172.16.3.250'}]
ipv6_subnet: 'fd00:fd00:fd00:4000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}]
- name: Tenant
vip: false # Tenant network does not use VIPs
name_lower: tenant
ip_subnet: '172.16.0.0/24'
allocation_pools: [{'start': '172.16.0.4', 'end': '172.16.0.250'}]
ipv6_subnet: 'fd00:fd00:fd00:5000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}]
- name: Management
# Management network is disabled by default
enabled: false
vip: false # Management network does not use VIPs
name_lower: management
ip_subnet: '10.0.1.0/24'
allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}]
ipv6_subnet: 'fd00:fd00:fd00:6000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:6000::10', 'end': 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}]
|
