diff options
Diffstat (limited to 'site/intel-pod18/networks/common-addresses.yaml')
| -rw-r--r-- | site/intel-pod18/networks/common-addresses.yaml | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/site/intel-pod18/networks/common-addresses.yaml b/site/intel-pod18/networks/common-addresses.yaml new file mode 100644 index 0000000..d113560 --- /dev/null +++ b/site/intel-pod18/networks/common-addresses.yaml @@ -0,0 +1,155 @@ +--- +# The purpose of this file is to define network related paramters that are +# referenced elsewhere in the manifests for this site. +# +schema: pegleg/CommonAddresses/v1 +metadata: + schema: metadata/Document/v1 + name: common-addresses + layeringDefinition: + abstract: false + layer: site + storagePolicy: cleartext +data: + calico: + # NEWSITE-CHANGEME: The interface that calico will use. Update if your + # logical bond interface name or calico VLAN have changed from the reference + # site design. + # This should be whichever + # bond and VLAN number specified in networks/physical/networks.yaml for the Calico + # network. E.g. VLAN 22 for the calico network as a member of bond0, you + # would set "interface=bond0.22" as shown here. + ip_autodetection_method: interface=ens785f0 + etcd: + # etcd service IP address + service_ip: 10.96.232.136 + + vip: + ingress_vip: '10.10.180.100/32' + maas_vip: '10.10.181.100/32' + + dns: + # Kubernetes cluster domain. Do not change. This is internal to the cluster. + cluster_domain: cluster.local + # DNS service ip + service_ip: 10.96.0.10 + # List of upstream DNS forwards. Verify you can reach them from your + # environment. If so, you should not need to change them. + upstream_servers: + - 8.8.8.8 + - 8.8.4.4 + # Repeat the same values as above, but formatted as a common separated + # string + upstream_servers_joined: 8.8.8.8,8.8.4.4 + # NEWSITE-CHANGEME: FQDN for ingress (i.e. "publicly facing" access point) + # Choose FQDN according to the ingress/public FQDN naming conventions at + # the top of this document. + ingress_domain: intel-pod18.opnfv.org + + genesis: + # NEWSITE-CHANGEME: Update with the hostname for the node which will take on + # the Genesis role. Refer to the hostname naming stardards in + # networks/physical/networks.yaml + # NOTE: Ensure that the genesis node is manually configured with this + # hostname before running `genesis.sh` on the node. + hostname: pod18-node1 + # NEWSITE-CHANGEME: Calico IP of the Genesis node. Use the "start" value for + # the calico network defined in networks/physical/networks.yaml for this IP. + ip: 10.10.182.21 + + bootstrap: + # NEWSITE-CHANGEME: Update with the "start" value/IP of the static range + # defined for the pxe network in networks/physical/networks.yaml + ip: 10.10.181.21 + + kubernetes: + # K8s API service IP + api_service_ip: 10.96.0.1 + # etcd service IP + etcd_service_ip: 10.96.0.2 + # k8s pod CIDR (network which pod traffic will traverse) + pod_cidr: 10.97.0.0/16 + # k8s service CIDR (network which k8s API traffic will traverse) + service_cidr: 10.96.0.0/16 + # misc k8s port settings + apiserver_port: 6443 + haproxy_port: 6553 + service_node_port_range: 30000-32767 + + # etcd port settings + etcd: + container_port: 2379 + haproxy_port: 2378 + + # NEWSITE-CHANGEME: A list of nodes (apart from Genesis) which act as the + # control plane servers. Ensure that this matches the nodes with the 'masters' + # tags applied in baremetal/nodes.yaml + masters: + - hostname: pod18-node2 + - hostname: pod18-node3 + + # NEWSITE-CHANGEME: Environment proxy information. + # NOTE: Reference Airship sites do not deploy behind a proxy, so this proxy section + # should be commented out. + # However if you are in a lab that requires proxy, ensure that these proxy + # settings are correct and reachable in your environment; otherwise update + # them with the correct values for your environment. + proxy: + http: "" + https: "" + no_proxy: [] + + node_ports: + drydock_api: 30000 + maas_api: 30001 + maas_proxy: 31800 # hardcoded in MAAS + + ntp: + # comma separated NTP server list. Verify that these upstream NTP servers are + # reachable in your environment; otherwise update them with the correct + # values for your environment. + servers_joined: '0.ubuntu.pool.ntp.org,1.ubuntu.pool.ntp.org,2.ubuntu.pool.ntp.org,4.ubuntu.pool.ntp.org' + + # NOTE: This will be updated soon + ldap: + # NEWSITE-CHANGEME: FQDN for LDAP. Update to the FQDN that is + # relevant for your type of deployment (test vs prod values, etc). + base_url: 'ldap.example.com' + # NEWSITE-CHANGEME: As above, with the protocol included to create a full URI + url: 'ldap://ldap.example.com' + # NEWSITE-CHANGEME: Update to the correct expression relevant for this + # deployment (test vs prod values, etc) + auth_path: DC=test,DC=test,DC=com?sAMAccountName?sub?memberof=CN=test,OU=Application,OU=Groups,DC=test,DC=test,DC=com + # NEWSITE-CHANGEME: Update to the correct AD group that contains the users + # relevant for this deployment (test users vs prod users/values, etc) + common_name: test + # NEWSITE-CHANGEME: Update to the correct subdomain for your type of + # deployment (test vs prod values, etc) + subdomain: test + # NEWSITE-CHANGEME: Update to the correct domain for your type of + # deployment (test vs prod values, etc) + domain: example + + storage: + ceph: + # NEWSITE-CHANGEME: CIDRs for Ceph. Update to match the network CIDR + # used for the `storage` network in networks/physical/networks.yaml + public_cidr: '10.10.183.0/24' + cluster_cidr: '10.10.183.0/24' + + neutron: + # NEWSITE-CHANGEME: Overlay network for VM traffic. Ensure the bond name and + # VLAN number are consistent with what's defined for the bond and the overlay + # network in networks/physical/networks.yaml + tunnel_device: 'ens785f0' + # bond which the overlay is a member of. Ensure the bond name is consistent + # with the bond assigned to the overlay network in + # networks/physical/networks.yaml + external_iface: 'ens785f1.1183' + + openvswitch: + # bond which the overlay is a member of. Ensure the bond name is consistent + # with the bond assigned to the overlay network in + # networks/physical/networks.yaml + external_iface: 'ens785f1.1183' +... |