Create initial set of site artifacts for pod18

Change-Id: If297227865597354c85467b918405cf5cf170355
Signed-off-by: Roy Tang <roy.s.tang@att.com>

4 files changed, 375 insertions, 0 deletions

diff --git a/site/intel-pod18/software/charts/kubernetes/container-networking/etcd.yaml b/site/intel-pod18/software/charts/kubernetes/container-networking/etcd.yaml
new file mode 100644
index 0000000..9241013
--- /dev/null
+++ b/site/intel-pod18/software/charts/kubernetes/container-networking/etcd.yaml
@@ -0,0 +1,127 @@
+---
+# The purpose of this file is to build the list of calico etcd nodes and the
+# calico etcd certs for those nodes in the environment.
+schema: armada/Chart/v1
+metadata:
+  schema: metadata/Document/v1
+  name: kubernetes-calico-etcd
+  layeringDefinition:
+    abstract: false
+    layer: site
+    parentSelector:
+      name: kubernetes-calico-etcd-global
+    actions:
+      - method: merge
+        path: .
+  storagePolicy: cleartext
+  substitutions:
+    # Generate a list of control plane nodes (i.e. genesis node + master node
+    # list) on which calico etcd will run and will need certs. It is assumed
+    # that Airship sites will have 4 control plane nodes, so this should not need to
+    # change for a new site.
+    - src:
+        schema: pegleg/CommonAddresses/v1
+        name: common-addresses
+        path: .genesis.hostname
+      dest:
+        path: .values.nodes[0].name
+    - src:
+        schema: pegleg/CommonAddresses/v1
+        name: common-addresses
+        path: .masters[0].hostname
+      dest:
+        path: .values.nodes[1].name
+    - src:
+        schema: pegleg/CommonAddresses/v1
+        name: common-addresses
+        path: .masters[1].hostname
+      dest:
+        path: .values.nodes[2].name
+
+    # Certificate substitutions for the node names assembled on the above list.
+    # NEWSITE-CHANGEME: Per above, the number of substitutions should not need
+    # to change with a standard Airship deployment. However, the names of each
+    # deckhand certficiate should be updated with the correct hostnames for your
+    # environment. The ordering is important (Genesis is index 0, then master
+    # nodes in the order they are specified in common-addresses).
+
+    # Genesis hostname - pod18-node1
+    - src:
+        schema: deckhand/Certificate/v1
+        name: calico-etcd-pod18-node1
+        path: .
+      dest:
+        path: .values.nodes[0].tls.client.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: calico-etcd-pod18-node1
+        path: .
+      dest:
+        path: .values.nodes[0].tls.client.key
+    - src:
+        schema: deckhand/Certificate/v1
+        name: calico-etcd-pod18-node1-peer
+        path: .
+      dest:
+        path: .values.nodes[0].tls.peer.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: calico-etcd-pod18-node1-peer
+        path: .
+      dest:
+        path: .values.nodes[0].tls.peer.key
+
+    # master node 1 hostname - pod18-node2
+    - src:
+        schema: deckhand/Certificate/v1
+        name: calico-etcd-pod18-node2
+        path: .
+      dest:
+        path: .values.nodes[1].tls.client.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: calico-etcd-pod18-node2
+        path: .
+      dest:
+        path: .values.nodes[1].tls.client.key
+    - src:
+        schema: deckhand/Certificate/v1
+        name: calico-etcd-pod18-node2-peer
+        path: .
+      dest:
+        path: .values.nodes[1].tls.peer.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: calico-etcd-pod18-node2-peer
+        path: .
+      dest:
+        path: .values.nodes[1].tls.peer.key
+
+    # master node 2 hostname - pod18-node3
+    - src:
+        schema: deckhand/Certificate/v1
+        name: calico-etcd-pod18-node3
+        path: .
+      dest:
+        path: .values.nodes[2].tls.client.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: calico-etcd-pod18-node3
+        path: .
+      dest:
+        path: .values.nodes[2].tls.client.key
+    - src:
+        schema: deckhand/Certificate/v1
+        name: calico-etcd-pod18-node3-peer
+        path: .
+      dest:
+        path: .values.nodes[2].tls.peer.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: calico-etcd-pod18-node3-peer
+        path: .
+      dest:
+        path: .values.nodes[2].tls.peer.key
+
+data: {}
+...
diff --git a/site/intel-pod18/software/charts/kubernetes/etcd/etcd.yaml b/site/intel-pod18/software/charts/kubernetes/etcd/etcd.yaml
new file mode 100644
index 0000000..54bfbe8
--- /dev/null
+++ b/site/intel-pod18/software/charts/kubernetes/etcd/etcd.yaml
@@ -0,0 +1,131 @@
+---
+# The purpose of this file is to build the list of k8s etcd nodes and the
+# k8s etcd certs for those nodes in the environment.
+schema: armada/Chart/v1
+metadata:
+  schema: metadata/Document/v1
+  name: kubernetes-etcd
+  layeringDefinition:
+    abstract: false
+    layer: site
+    parentSelector:
+      name: kubernetes-etcd-global
+    actions:
+      - method: merge
+        path: .
+  storagePolicy: cleartext
+  substitutions:
+    # Generate a list of control plane nodes (i.e. genesis node + master node
+    # list) on which k8s etcd will run and will need certs. It is assumed
+    # that Airship sites will have 4 control plane nodes, so this should not need to
+    # change for a new site.
+    - src:
+        schema: pegleg/CommonAddresses/v1
+        name: common-addresses
+        path: .genesis.hostname
+      dest:
+        path: .values.nodes[0].name
+    - src:
+        schema: pegleg/CommonAddresses/v1
+        name: common-addresses
+        path: .masters[0].hostname
+      dest:
+        path: .values.nodes[1].name
+    - src:
+        schema: pegleg/CommonAddresses/v1
+        name: common-addresses
+        path: .masters[1].hostname
+      dest:
+        path: .values.nodes[2].name
+
+    # Certificate substitutions for the node names assembled on the above list.
+    # NEWSITE-CHANGEME: Per above, the number of substitutions should not need
+    # to change with a standard Airship deployment. However, the names of each
+    # deckhand certficiate should be updated with the correct hostnames for your
+    # environment. The ordering is important (Genesis is index 0, then master
+    # nodes in the order they are specified in common-addresses).
+
+    # Genesis Exception*
+    # *NOTE: This is an exception in that `genesis` is not the hostname of the
+    # genesis node, but `genesis` is reference here in the certificate names
+    # because of certain Promenade assumptions that may be addressed in the
+    # future. Therefore `genesis` is used instead of `pod18-node1` here.
+    - src:
+        schema: deckhand/Certificate/v1
+        name: kubernetes-etcd-genesis
+        path: .
+      dest:
+        path: .values.nodes[0].tls.client.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: kubernetes-etcd-genesis
+        path: .
+      dest:
+        path: .values.nodes[0].tls.client.key
+    - src:
+        schema: deckhand/Certificate/v1
+        name: kubernetes-etcd-genesis-peer
+        path: .
+      dest:
+        path: .values.nodes[0].tls.peer.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: kubernetes-etcd-genesis-peer
+        path: .
+      dest:
+        path: .values.nodes[0].tls.peer.key
+
+    # master node 1 hostname - pod18-node2
+    - src:
+        schema: deckhand/Certificate/v1
+        name: kubernetes-etcd-pod18-node2
+        path: .
+      dest:
+        path: .values.nodes[1].tls.client.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: kubernetes-etcd-pod18-node2
+        path: .
+      dest:
+        path: .values.nodes[1].tls.client.key
+    - src:
+        schema: deckhand/Certificate/v1
+        name: kubernetes-etcd-pod18-node2-peer
+        path: .
+      dest:
+        path: .values.nodes[1].tls.peer.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: kubernetes-etcd-pod18-node2-peer
+        path: .
+      dest:
+        path: .values.nodes[1].tls.peer.key
+
+    # master node 2 hostname - pod18-node3
+    - src:
+        schema: deckhand/Certificate/v1
+        name: kubernetes-etcd-pod18-node3
+        path: .
+      dest:
+        path: .values.nodes[2].tls.client.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: kubernetes-etcd-pod18-node3
+        path: .
+      dest:
+        path: .values.nodes[2].tls.client.key
+    - src:
+        schema: deckhand/Certificate/v1
+        name: kubernetes-etcd-pod18-node3-peer
+        path: .
+      dest:
+        path: .values.nodes[2].tls.peer.cert
+    - src:
+        schema: deckhand/CertificateKey/v1
+        name: kubernetes-etcd-pod18-node3-peer
+        path: $
+      dest:
+        path: .values.nodes[2].tls.peer.key
+
+data: {}
+...
diff --git a/site/intel-pod18/software/charts/ucp/divingbell/divingbell.yaml b/site/intel-pod18/software/charts/ucp/divingbell/divingbell.yaml
new file mode 100644
index 0000000..50f8f48
--- /dev/null
+++ b/site/intel-pod18/software/charts/ucp/divingbell/divingbell.yaml
@@ -0,0 +1,101 @@
+---
+# The purpose of this file is to define site-specific parameters to the
+# UAM-lite portion of the divingbell chart:
+# 1. User accounts to create on bare metal
+# 2. SSH public key for operationg system access to the bare metal
+# 3. Passwords for operating system access via iDrac/iLo console. SSH password-
+#    based auth is disabled.
+schema: armada/Chart/v1
+metadata:
+  schema: metadata/Document/v1
+  name: ucp-divingbell
+  layeringDefinition:
+    abstract: false
+    layer: site
+    parentSelector:
+      name: ucp-divingbell-global
+    actions:
+      - method: merge
+        path: .
+  labels:
+    name: ucp-divingbell-site
+  storagePolicy: cleartext
+  substitutions:
+    - dest:
+        path: .values.conf.uamlite.users[0].user_sshkeys[0]
+      src:
+        schema: deckhand/PublicKey/v1
+        name: jenkins_ssh_public_key
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[1].user_sshkeys[0]
+      src:
+        schema: deckhand/PublicKey/v1
+        name: grego_ssh_public_key
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[1].user_crypt_passwd
+      src:
+        schema: deckhand/Passphrase/v1
+        name: grego_crypt_password
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[2].user_sshkeys[0]
+      src:
+        schema: deckhand/PublicKey/v1
+        name: kasparss_ssh_public_key
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[2].user_crypt_passwd
+      src:
+        schema: deckhand/Passphrase/v1
+        name: kasparss_crypt_password
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[3].user_sshkeys[0]
+      src:
+        schema: deckhand/PublicKey/v1
+        name: jorgeas_ssh_public_key
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[4].user_sshkeys[0]
+      src:
+        schema: deckhand/PublicKey/v1
+        name: trungdt_ssh_public_key
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[5].user_sshkeys[0]
+      src:
+        schema: deckhand/PublicKey/v1
+        name: miniroy_ssh_public_key
+        path: .
+    - dest:
+        path: .values.conf.uamlite.users[5].user_crypt_passwd
+      src:
+        schema: deckhand/Passphrase/v1
+        name: miniroy_crypt_password
+        path: .
+data:
+  values:
+    conf:
+      uamlite:
+        users:
+          - user_name: jenkins
+            user_sudo: true
+            user_sshkeys: []
+          - user_name: grego
+            user_sudo: true
+            user_sshkeys: []
+          - user_name: kasparss
+            user_sudo: true
+            user_sshkeys: []
+          - user_name: jorgeas
+            user_sudo: true
+            user_sshkeys: []
+          - user_name: trungdt
+            user_sudo: true
+            user_sshkeys: []
+          - user_name: miniroy
+            user_sudo: true
+            user_sshkeys: []
+...
diff --git a/site/intel-pod18/software/config/common-software-config.yaml b/site/intel-pod18/software/config/common-software-config.yaml
new file mode 100644
index 0000000..b9f035f
--- /dev/null
+++ b/site/intel-pod18/software/config/common-software-config.yaml
@@ -0,0 +1,16 @@
+---
+# The purpose of this file is to define site-specific common software config
+# paramters.
+schema: pegleg/CommonSoftwareConfig/v1
+metadata:
+  schema: metadata/Document/v1
+  name: common-software-config
+  layeringDefinition:
+    abstract: false
+    layer: site
+  storagePolicy: cleartext
+data:
+  osh:
+    # NEWSITE-CHANGEME: Replace with the site name
+    region_name: intel-pod18
+...