Initial site reference manifests for intel-pod17

This includes cntt type definition as well as site manifests.

Change-Id: I4829c80199795af0c841419b8fd19557295fe244
Signed-off-by: Kaspars Skels <kaspars.skels@att.com>

1 files changed, 254 insertions, 0 deletions

diff --git a/site/intel-pod17/baremetal/nodes.yaml b/site/intel-pod17/baremetal/nodes.yaml
new file mode 100644
index 0000000..cd88a66
--- /dev/null
+++ b/site/intel-pod17/baremetal/nodes.yaml
@@ -0,0 +1,254 @@
+---
+# Drydock BaremetalNode resources for a specific rack are stored in this file.
+#
+# NOTE: For new sites, you should complete the networks/physical/networks.yaml
+# file before working on this file.
+#
+# In this file, you should make the number of `drydock/BaremetalNode/v1`
+# resources equal the number of bare metal nodes you have, either by deleting
+# excess BaremetalNode definitions (if there are too many), or by copying and
+# pasting the last BaremetalNode in the file until you have the correct number
+# of baremetal nodes (if there are too few).
+#
+# Then in each file, address all additional NEWSITE-CHANGEME markers to update
+# the data in these files with the right values for your new site.
+#
+# *NOTE: The Genesis node is counted as one of the control plane nodes. Note
+# that the Genesis node does not appear on this bare metal list, because the
+# procedure to reprovision the Genesis host with MaaS has not yet been
+# implemented. Therefore there will be only three bare metal nodes in this file
+# with the 'masters' tag, as the genesis roles are assigned in a difference
+# place (profiles/genesis.yaml).
+# NOTE: The host profiles for the control plane are further divided into two
+# variants: primary and secondary. The only significance this has is that the
+# "primary" nodes are active Ceph nodes, whereas the "secondary" nodes are Ceph
+# standby nodes. For Ceph quorum, this means that the control plane split will
+# be 3 primary + 1 standby host profile, and the Genesis node counts toward one
+# of the 3 primary profiles. Other control plane services are not affected by
+# primary vs secondary designation.
+#
+# TODO: Include the hostname naming convention
+#
+schema: 'drydock/BaremetalNode/v1'
+metadata:
+  schema: 'metadata/Document/v1'
+  # NEWSITE-CHANGEME: Replace with the hostname of the first node in the rack,
+  # after (excluding) genesis.
+  name: pod17-node1
+  layeringDefinition:
+    abstract: false
+    layer: site
+  storagePolicy: cleartext
+data:
+  # NEWSITE-CHANGEME: The IPv4 address assigned to each logical network on this
+  # node. In the reference Airship deployment, this is all logical Networks defined
+  # in networks/physical/networks.yaml. IP addresses are manually assigned, by-hand.
+  # (what could possibly go wrong!) The instructions differ for each logical
+  # network, which are laid out below.
+  addressing:
+    # The iDrac/iLo IP of the node. It's important that this match up with the
+    # node's hostname above, so that the rack number and node position encoded
+    # in the hostname are accurate and matching the node that IPMI operations
+    # will be performed against (for poweron, poweroff, PXE boot to wipe disk or
+    # reconfigure identity, etc - very important to get right for these reasons).
+    # These addresses should already be assigned to nodes racked and stacked in
+    # the environment; these are not addresses which MaaS assigns.
+    - network: oob
+      address: 10.10.170.11
+    # The IP of the node on the PXE network. Refer to the static IP range
+    # defined for the PXE network in networks/physical/networks.yaml. Begin allocating
+    # IPs from this network, starting with the second IP (inclusive) from the
+    # allocation range of this subnet (Genesis node will have the first IP).
+    # Ex: If the start IP for the PXE "static" network is 10.23.20.11, then
+    # genesis will have 10.23.20.11, this node will have 10.23.20.12, and
+    # so on with incrementing IP addresses with each additional node.
+    - network: dmz
+      address: 10.10.170.21
+    # Genesis node gets first IP, all other nodes increment IPs from there
+    # within the allocation range defined for the network in
+    # networks/physical/networks.yaml
+    - network: admin
+      address: 10.10.171.21
+    # Genesis node gets first IP, all other nodes increment IPs from there
+    # within the allocation range defined for the network in
+    # networks/physical/networks.yaml
+    - network: private
+      address: 10.10.172.21
+    # Genesis node gets first IP, all other nodes increment IPs from there
+    # within the allocation range defined for the network in
+    # networks/physical/networks.yaml
+    - network: storage
+      address: 10.10.173.21
+    # Genesis node gets first IP, all other nodes increment IPs from there
+    # within the allocation range defined for the network in
+    # networks/physical/networks.yaml
+    - network: management
+      address: 10.10.174.21
+  # NEWSITE-CHANGEME: Set the host profile for the node.
+  # Note that there are different host profiles depending if this is a control
+  # plane vs data plane node, and different profiles that map to different types
+  # hardware. Control plane host profiles are further broken down into "primary"
+  # and "secondary" profiles (refer to the Notes section at the top of this doc).
+  # Select the host profile that matches up to your type of
+  # hardware and function. E.g., the r720 here refers to Dell R720 hardware, the
+  # 'cp' refers to a control plane profile, and the "primary" means it will be
+  # an active member in the ceph quorum. Refer to profiles/host/ for the list
+  # of available host profiles specific to this site (otherwise, you may find
+  # a general set of host profiles at the "type" or "global" layers/folders.
+  # If you have hardware that is not on this list of profiles, you may need to
+  # create a new host profile for that hardware.
+  # Regarding control plane vs other data plane profiles, refer to the notes at
+  # the beginning of this file. There should be one control plane node per rack,
+  # including Genesis. Note Genesis won't actually be listed in this file as a
+  # BaremetalNode, but the rest are.
+  # This is the second "primary" control plane node after Genesis.
+  host_profile: cp-intel-s2600wt
+  metadata:
+    tags:
+      # NEWSITE-CHANGEME: See previous comment. Apply 'masters' tag for control
+      # plane node, and 'workers' tag for data plane hosts.
+      - 'masters'
+    # NEWSITE-CHANGEME: Refer to site engineering package or other supporting
+    # documentation for the specific rack name. This should be a rack name that
+    # is meaningful to data center personnel (i.e. a rack they could locate if
+    # you gave them this rack designation).
+    rack: pod17-rack
+...
+---
+schema: 'drydock/BaremetalNode/v1'
+metadata:
+  schema: 'metadata/Document/v1'
+  # NEWSITE-CHANGEME: The next node's hostname
+  name: pod17-node2
+  layeringDefinition:
+    abstract: false
+    layer: site
+  storagePolicy: cleartext
+data:
+  # NEWSITE-CHANGEME: The next node's IPv4 addressing
+  addressing:
+    - network: oob
+      address: 10.10.170.12
+    - network: dmz
+      address: 10.10.170.22
+    - network: admin
+      address: 10.10.171.22
+    - network: private
+      address: 10.10.172.22
+    - network: storage
+      address: 10.10.173.22
+    - network: management
+      address: 10.10.174.22
+  # NEWSITE-CHANGEME: The next node's host profile
+  host_profile: cp-intel-s2600wt
+  metadata:
+    # NEWSITE-CHANGEME: The next node's rack designation
+    rack: pod17-rack
+    # NEWSITE-CHANGEME: The next node's role desigatnion
+    tags:
+      - 'masters'
+...
+---
+schema: 'drydock/BaremetalNode/v1'
+metadata:
+  schema: 'metadata/Document/v1'
+  # NEWSITE-CHANGEME: The next node's hostname
+  name: pod17-node3
+  layeringDefinition:
+    abstract: false
+    layer: site
+  storagePolicy: cleartext
+data:
+  # NEWSITE-CHANGEME: The next node's IPv4 addressing
+  addressing:
+    - network: oob
+      address: 10.10.170.13
+    - network: dmz
+      address: 10.10.170.23
+    - network: admin
+      address: 10.10.171.23
+    - network: private
+      address: 10.10.172.23
+    - network: storage
+      address: 10.10.173.23
+    - network: management
+      address: 10.10.174.23
+  # NEWSITE-CHANGEME: The next node's host profile
+  # This is the third "primary" control plane profile after genesis
+  host_profile: dp-intel-s2600wt
+  metadata:
+    # NEWSITE-CHANGEME: The next node's rack designation
+    rack: pod17-rack
+    # NEWSITE-CHANGEME: The next node's role desigatnion
+    tags:
+      - 'workers'
+...
+---
+schema: 'drydock/BaremetalNode/v1'
+metadata:
+  schema: 'metadata/Document/v1'
+  # NEWSITE-CHANGEME: The next node's hostname
+  name: pod17-node4
+  layeringDefinition:
+    abstract: false
+    layer: site
+  storagePolicy: cleartext
+data:
+  # NEWSITE-CHANGEME: The next node's IPv4 addressing
+  addressing:
+    - network: oob
+      address: 10.10.170.14
+    - network: dmz
+      address: 10.10.170.24
+    - network: admin
+      address: 10.10.171.24
+    - network: private
+      address: 10.10.172.24
+    - network: storage
+      address: 10.10.173.24
+    - network: management
+      address: 10.10.174.24
+  # NEWSITE-CHANGEME: The next node's host profile
+  # This is the one and only appearance of the "secondary" control plane profile
+  host_profile: dp-intel-s2600wt
+  metadata:
+    # NEWSITE-CHANGEME: The next node's rack designation
+    rack: pod17-rack
+    # NEWSITE-CHANGEME: The next node's role desigatnion
+    tags:
+      - 'workers'
+...
+---
+schema: 'drydock/BaremetalNode/v1'
+metadata:
+  schema: 'metadata/Document/v1'
+  # NEWSITE-CHANGEME: The next node's hostname
+  name: pod17-node5
+  layeringDefinition:
+    abstract: false
+    layer: site
+  storagePolicy: cleartext
+data:
+  # NEWSITE-CHANGEME: The next node's IPv4 addressing
+  addressing:
+    - network: oob
+      address: 10.10.170.15
+    - network: dmz
+      address: 10.10.170.25
+    - network: admin
+      address: 10.10.171.25
+    - network: private
+      address: 10.10.172.25
+    - network: storage
+      address: 10.10.173.25
+    - network: management
+      address: 10.10.174.25
+  # NEWSITE-CHANGEME: The next node's host profile
+  host_profile: dp-intel-s2600wt
+  metadata:
+    # NEWSITE-CHANGEME: The next node's rack designation
+    rack: pod17-rack
+    # NEWSITE-CHANGEME: The next node's role desigatnion
+    tags:
+      - 'workers'
+...