aboutsummaryrefslogtreecommitdiffstats
path: root/yardstick/network_services/vnf_generic/vnf/sample_vnf.py
AgeCommit message (Collapse)AuthorFilesLines
2017-12-14NSB TRex: convert DPDK port number to logical TRex port numberRoss Brattain1-0/+4
when we create TRex config we sort based on PCI bus address and create a logical port ordering. We need to save this port ordering and re-use it everywhere. redirect vnfd_helper.port_num() to resource_helper.port_num() to use the logical mapping Change-Id: Ibff628556d5e11e686e15716a66a3210758c4ff0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit ce52059f5f78912eeff2d97235c1028c218bf960)
2017-10-19NSB: fix trex config to use dpdk port numberRoss Brattain1-1/+2
From some reason Heat/Neutron is now creating interfaces such that xe0 and xe1 are swapped. xe0 fa:16:3e:38:c7:66 0000:00:05.0 xe1 fa:16:3e:2f:f3:e2 0000:00:03.0 this causes the DPDK port numbering to be swapped. xe0 is DPDK port 1 because it has higher PCI address xe1 is DPDK port 0 because it has lower PCI address. The VNF is configured correctly because it uses DPDK port numbers, whereas TRex was using interface list ordering. Modify trex_cfg.yaml to use DPDK port ordering. This also requires running generate_cfg() after setup() in instantiate() +------------------------------------+-------------------+------------------------------+--------+ | Name | MAC Address | Fixed IP Addresses | Status | +------------------------------------+-------------------+------------------------------+--------+ | vnf_0.yardstick-af5ccb47-xe0-port | fa:16:3e:66:a5:e4 | ip_address='10.1.0.7', | ACTIVE | | vnf_0.yardstick-af5ccb47-mgmt-port | fa:16:3e:fa:98:fe | ip_address='10.0.1.10', | ACTIVE | | tg_0.yardstick-af5ccb47-xe1-port | fa:16:3e:2f:f3:e2 | ip_address='10.1.1.9', | ACTIVE | | vnf_0.yardstick-af5ccb47-xe1-port | fa:16:3e:f3:1d:f5 | ip_address='10.1.1.4', | ACTIVE | | | fa:16:3e:e3:8c:65 | ip_address='10.0.1.1', | ACTIVE | | | fa:16:3e:ff:d1:b7 | ip_address='11.191.14.110', | N/A | | tg_0.yardstick-af5ccb47-xe0-port | fa:16:3e:38:c7:66 | ip_address='10.1.0.8', | ACTIVE | | | fa:16:3e:ff:53:5f | ip_address='11.191.14.101', | DOWN | | | fa:16:3e:23:5d:2c | ip_address='10.0.1.2', | ACTIVE | | tg_0.yardstick-af5ccb47-mgmt-port | fa:16:3e:7a:df:4e | ip_address='10.0.1.5', | ACTIVE | | | fa:16:3e:22:65:36 | ip_address='11.191.14.109', | N/A | +------------------------------------+-------------------+------------------------------+--------+ /sys/devices/pci0000:00/0000:00:03.0/virtio0/net/ens3/address:fa:16:3e:2f:f3:e2 /sys/devices/pci0000:00/0000:00:05.0/virtio2/net/ens5/address:fa:16:3e:38:c7:66 Change-Id: Iaef2c7d9a5af7f45bd805a8ad6ee545ce0495cb1 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> (cherry picked from commit 7ed018cddf88ac1c5a92f71fa5e421e66d259bc0)
2017-10-18Enable static cgnapt functionality.Deepak S1-7/+0
Change-Id: Ie770ca69ebdc66589ed6ca5c25bfc9a75afb8938 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-10-13Move arp route tbl to script and update defailt vnf config filesDeepak S1-1/+2
Change-Id: I8674caa15c9fc32cfacb17f558da5fb31094877e Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-06Disable VNF deploy by defaultDeepak S1-7/+3
Change-Id: I27bcc41c855f34fb1fd0332fc24e7bf0b2af4ec2 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-04NSB PROX test hang fixesRoss Brattain1-10/+48
The PROX tests were hanging in the duration runner. These are fixes for various errors: raise error in collect_kpi if VNF is down move prox dpdk_rebind after collectd stop fix dpdk nicbind rebind to group by drivers prox: raise error in collect_kpi if the VNF is down prox: add VNF_TYPE for consistency sample_vnf: debug and fix kill_vnf pkill is not matching some executable names, add some debug process dumps and try switching back to killall until we can find the issue sample_vnf: add default timeout, so we can override default 3600 SSH timeout collect_kpi is the point at which we check the VNFs and TGs for failures or exits queues are the problem make sure we aren't silently blocking on non-empty queues by canceling join thread in subprocess fixup duration runner to close queues and other attempt to stop duration runner from hanging VnfdHelper: memoize port_num resource: fail if ssh can't connect at the end of 3600 second test our ssh connection is dead, so we can't actually stop collectd unless we reconnect fix stop() logic to ignore ssh errors Change-Id: I6c8e682a80cb9d00362e2fef4a46df080f304e55 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03Enable multi-port perf in trex as TGDeepak S1-1/+0
set TRex -c option for threads per port based on hardware number of queues. We can't auto-detect number of queues and we can't use more than one thread per core on systems with single-queue interfaces, so move the option to the config file options: tg_0: queues_per_port: 2 also enable trex debug by removing >/dev/null redirection options: tg_0: trex_server_debug: true Change-Id: I46da187849282bf28f4ef5b333e1ae890e202768 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03drain runner queue and undo cancel_join_threadRoss Brattain1-0/+3
Sometimes the runners can hang. Initially debugging lead to the queue join thread, so I thought we could cancel all the join threads and everything would be okay. But it turns out canceling the queue join threads can lead to corruption of the queues, so when we go to drain the queues the task hangs. But it also turns out that we were not properly draining the queues in the task process. We were waiting for all the runners to exit, then draining the queues. This is bad and will cause the queues to fill up and hang and/or drop data or corrupt the queues. The proper fix seems to be to draining the queues in a loop before calling join with a timeout. Also modified the queue drain loops to no block on queue.get() Revert "cancel all queue join threads" This reverts commit 75c0e3a54b8f6e8fd77c7d9d95decab830159929. Revert "duration runner: add teardown and cancel all queue join threads" This reverts commit 7eb6abb6931b24e085b139cc3500f4497cdde57d. Change-Id: Ic4f8e814cf23615621c1250535967716b425ac18 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-30collectd: write config file from Jinja2 templateRoss Brattain1-6/+17
We have the collectd.conf inside the python package so instead of copying it from various places, write the template directly to the remote system. collectd: read collect.conf template with pkgresources read the collectd.conf file as a string directly and upload without creating temp file use Jinja2 template, disable failing plugins use proper Jinja2 template, disable the plugins that were failing to load and blocking startup add support for per-testcase collectd.conf config using YAML add support for custom interval, default is 25 seconds Change-Id: Id904f7b7c9f41a9dd7adf5dfa06c064d65c25d2d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-19NSB: count from 0, vnf_0, tg_9, private->uplink, public->downlinkRoss Brattain1-6/+7
Also rename private to uplink, public to downlink for scale-out template we need to count from 0 so we can use range() without +1/-1 errors vnf_0, vnf_1 tg_0, tg_1 also fix Ixia defaults Change-Id: I6aecfbb95f99af20f012a9df19c19be77d1b5b77 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-18Fix the offset bug for UDP dst port in the traffic profileMartin Banszel1-2/+3
Also sends a new line to the VNF when waiting for prompt. Change-Id: Ib8641093974cd6713594aac9b418595ad5268e87 Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
2017-09-18NSB: fix port topologyMartin Banszel1-110/+72
Add a new PortPair class to resolve the topology into list of public and private ports. Before we were calculating public/private in multiple locations and using different conventions. In addition for all the DPDK test we need to use the DPDK port number and no rely on interface ordering or interface naming conventions. We used to use xe0 -> 0, xe1 -> 1, etc. This is not the DPDK port number. Use the new dpdknicbind_helper class to parse the output of dpdk-devbind.py to find the actual DPDK port number at runtime. We then use this DPDK port number to correctly calculate the port_mask_hex. The port mask maps the DPDK port num (PMD ID) to the LINK ID used in the pipeline config We also need to make sure we only use the interfaces matched to the topology and not use all the interfaces, because in some cases we will have unused interfaces. In particular TRex always requires an even number of interfaces, so for single port TRex tests we have to create the second port and not use it. Thus we had to modify the traffic generator stats code to only dump stats for used ports and no unused ports. Ixia was using interface ordering to map to Ixia ports, instead we use the dpdk_port_num which must be hardcoded for Ixia. Renamed traffic_profile.execute to traffic_profile.execute_traffic so we can trace the code easier. We pass the port used by the traffic profile to generate_samples so we don't get stats for unused ports. Fixed up vPE config creation and bring up issues. Fixed up CGNAPT and UDP_Replay to work correctly. Tested with 4-port scale-out Change-Id: I2e4f328bff2904108081e92a4bf712333fa73869 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-05Add fixes for heat deployed UDP_Replay and TRexMartin Banszel1-6/+4
- Added a PROTOCOL_MAP to map the protocol names to codes -- the scapy requires the code, it fails if the proto is set e.g. to 'udp' - ip addresses must be str, not unicode -- explicit conversion to str added - removed unittest for setup_vnf_environment in test_tg_trex.py as it is the same function as already tested in test_sample_vnf.py - traffic_profile refactored -- code repetition decreased, unittest adapted Known issues: - there is a an attempt to stop already stopped trex. It fires an exception that stop command is issued on the disconnected client. Change-Id: I87e9029630f48b30e8f5b4f9d88ab3b25fd65f03 Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
2017-09-04Addition of Prox NSB changes in yardstickabhijitsinha1-9/+26
JIRA: YARDSTICK-802 Addition of Prox L2Fwd, MPLS test cases for BM and Heat. updates: Most of tg_prox and prox_vnf were absorbed into the base classes. delete most of ProxDpdkVnfSetupEnvHelper, it is handled by DpdkVnfSetupEnvHelper baseclass use standard _build_pipeline_kwargs methods don't use terminate() use baseclass version add new method kill_vnf that runs pkill -x replace resource_helper.execute() with vnf_execture for dumping stats In order to share code between tg_prox and vnf_prox refactor to have tg_prox hold and wrap a ProxApproxVnf instance and call methods on that class. Do this instead of multiple-inheritance. Implement ProxApproxVnf.terminate() using prox socket command based exit, (stop_all, quit, force_quit). vnf_execute calls resource_helper.execute() which calls socket methods on the sut object. Since tg_prox wraps the VNF object, we can call terminate on the VNF object and it should work correctly. move prox config generation to parent process we need to get core number info from config file inside the TG processes, so we need to generate the config in the parent process so the data is copied to the child during the fork. moved more config file methods to the setup_helper class. we run force_quit after quit, so the socket should already be closed this will trigger socket error, so add _ignore_errors option for vnf_execute to ignore socket errors Fixed the terminate issue. Added MPLS tests. Added TG Stats in_packet/out_packet Fixed compile (pep8) issues Fixed MPLS TG port stats, in/out packets Added Grafana dashboards for L2FWD and MPLS Traffic profiles modified for tolerated loss and precision as per DATS tests. Added unit test case for Mpls Single port test stats collection support. Change-Id: Idd9493f597c668a3bb7d90e167e6a418546106e8 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-01sample_vnf: default to 16GB of 2048Kb hugepagesRoss Brattain1-1/+1
8192 * 2048kB = 16GB Change-Id: I82bf420794e5174e88cfaea08b9fab0d77c2be7f Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-30sample_vnf: run_traffic loop, check if tg_process is aliveRoss Brattain1-0/+3
if the tg_process crashes, this loop won't terminate unless we check tg_process.is_alive() wait 1 second before checking in case is_alive needs time to become True Change-Id: Ia0b8fd884dcfeb75ebb8e36caaf1f0b70dab079d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-24Standardized TRex client library pathMaciej Skrocki1-3/+3
- path should be defined via TREX_CLIENT_LIB environmental variable e.g. TREX_CLIENT_LIB=/opt/trex_client/stl - refactored unit tests Change-Id: I18767e48daf774432c010f1b88d18a4f0ee4e156 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-17Fix import error in IxNetworkDeepak S1-0/+1
This patch fixes import error related to ixnetwork and do not wait for TG server to start as IXIA is always running :) Change-Id: I49d6b100eadafad75431cb8974605a6faa496f23 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-15run_traffic: capture and exit gracefully if crash in trex run_trafficDeepak S1-14/+20
new non-blocking code of run_traffic has raise condition which causes trex client to exit with STLError. This patches captures the exception and exit gracefully Traceback (most recent call last): File "/usr/lib/python2.7/multiprocessing/process.py", line 258, in _bootstrap self.run() File "/usr/lib/python2.7/multiprocessing/process.py", line 114, in run self._target(*self._args, **self._kwargs) File "/opt/nsb_bin/yardstick_venv/lib/python2.7/site-packages/yardstick-0.1.dev0-py2.7.egg/yardstick/network_services/vnf_generic/vnf/sample_vnf.py", line 945, in _traffic_runner self.resource_helper.run_traffic(traffic_profile) File "/opt/nsb_bin/yardstick_venv/lib/python2.7/site-packages/yardstick-0.1.dev0-py2.7.egg/yardstick/network_services/vnf_generic/vnf/sample_vnf.py", line 506, in run_traffic self._run_traffic_once(traffic_profile) File "/opt/nsb_bin/yardstick_venv/lib/python2.7/site-packages/yardstick-0.1.dev0-py2.7.egg/yardstick/network_services/vnf_generic/vnf/tg_rfc2544_trex.py", line 63, in _run_traffic_once self.client.stop(self.my_ports) File "/opt/nsb_bin/trex/scripts/automation/trex_control_plane/stl/trex_stl_lib/trex_stl_client.py", line 1202, in wrap2 raise STLError("'{0}' - connection to the server had been lost: '{1}'".format(func_name, client.conn.get_disconnection_cause())) STLError: Change-Id: Ie5741339451e0a3f9c4bb48f64fd35d86d18e5d4 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-14PROX VNF and TGRoss Brattain1-0/+1
PROX was added to samplevnf project https://git.opnfv.org/samplevnf/tree/VNFs/DPPD-PROX JIRA: YARDSTICK-638 Change-Id: If9875b1130c6bed87deb8720b0d8b28ede9289d9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-09NSB fixes: docstring, whitespace, etc.Ross Brattain1-2/+1
remove unused docstring params remove whitespace fix sudo vnf_build command ignore stdout Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Change-Id: I6fcdbb0ed4bc6b7fc2f557529f5ff9fd960c05e9
2017-08-08CollectdDeepak S1-1/+2
Change-Id: I15e4ac38b347a08350b71c68469e2793eeed92ab Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-08NSB updateDeepak S1-0/+994
Refactored main NSB VNF classes accroding to class diagram https://wiki.opnfv.org/display/yardstick/NSB+class+diagram All the SampleVNFs have been separated and placed under the SampleVNF class. Added AutoConnectSSH to automatically create SSH conneciton on demand. Added VnfdHelper class to wrap the VNFD dictionary in prepartion for class-based modeling. Extracted DpdkVnfSetupEnvHelper for DPDK based VNF setup. Extracted Stats and other client config to ResourceHelper Had to replace dict_key_flatten with deepgetitem due to Python 2.7 Jinja2 infinite recursion. Change-Id: Ia8840e9c44cdbdf39aab6b02e6d2176b31937dc9 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>