summaryrefslogtreecommitdiffstats
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2017-07-25update storperf installation in YardstickJingLu52-13/+15
Storper has updated its installaion step. The former used "nginx.conf" is not required any more. Change-Id: I9edd57ae7cffd3a95990844e6b775616d09132f1 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-07-25Merge "Add multiqueue support"Ross Brattain2-0/+543
2017-07-24Merge "Open storperf testcase to huawei-pod2"Jing Lu5-12/+30
2017-07-20Add multiqueue supportJing Zhang2-0/+543
Problem: Neither OVS nor SRIOV multi-queue is not supported. Guest VM lacks tuning to reach high throughput. Solution: (1) Build SRIOV multi-queue capable guest image by recompiling the igxbevf driver (make CFLAGS_EXTRA=-DIXGBE_ENABLE_VF_MQ install). (2) Change pktgen to send on multiple queues. (3) Add tuning in guest VM (Disable irqbalance and setup vNIC interrupt affinity to vCPUs) Update 1: Takes care comments plus adds unit test cases Update 2: Jenkins reports code coverage 81%, local reports 96%, add more unit test cases Update 3: Manually rebased to adapt to SSH.from_node() Update 4: Takes care comments for vnic_type, vnic_name Change-Id: Ieb15381c653b13697487d095efa4be6c3c49fa42 JIRA: YARDSTICK-619 Signed-off-by: Jing Zhang <jing.c.zhang@nokia.com>
2017-07-19heat: port_security_enabled, allowed_address_pairs, disable gateway_ipRoss Brattain1-7/+28
xe0: cidr: '10.0.2.0/24' vld_id: public allowed_address_pairs: - ip_address: '0.0.0.0/0' xe1: cidr: '10.0.3.0/24' vld_id: private allowed_address_pairs: - ip_address: '0.0.0.0/0' We need to disable gateways on data plane interfaces With TGs and VFNs we probably don't need gateway on data interfaces Change-Id: I276a7d591a0a3ff03877c4f525303fc2874de683 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-17Merge "test_base: speedup unittest, wait for queue not empty"Ross Brattain1-2/+8
2017-07-17Open storperf testcase to huawei-pod2JingLu55-12/+30
JIRA: YARDSTICK-712 Change-Id: If91c936a3a59580a987cb6762db5d063edf6c9d7 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-07-17Merge "test_nstat: speedup unittests, sleep for 0 seconds"Ross Brattain1-3/+3
2017-07-17Merge "pktgen: speedup unittest, mock time.sleep"Ross Brattain1-9/+10
2017-07-17Merge "tg: speedup unittests, mock time.sleep"Ross Brattain3-8/+12
2017-07-17Merge "test_pktgen_dpdk_throughput: speedup unittest, mock time.sleep()"Ross Brattain1-8/+9
2017-07-17test_nstat: speedup unittests, sleep for 0 secondsRoss Brattain1-3/+3
Change-Id: I3f961e26fb045ea7501dc3a5b630b3ef94fec3ee Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-17test_heat: ipaddress expects unicode inputsRoss Brattain1-14/+14
weird error E AddressValueError: '10.20.0.0/15' does not appear to be an IPv4 or IPv6 network. Did you pass in a bytes (str in Python 2) instead of a unicode object? I guess we need to convert the stack.outputs mock to unicode FAILED tests/unit/benchmark/contexts/test_heat.py:137 (HeatContextTestCase.test_add_server_port) self = <tests.unit.benchmark.contexts.test_heat.HeatContextTestCase testMethod=test_add_server_port> def test_add_server_port(self): network1 = mock.MagicMock() network1.vld_id = 'vld111' network2 = mock.MagicMock() network2.vld_id = 'vld777' self.test_context.name = 'foo' self.test_context.stack = mock.MagicMock() self.test_context.networks = { 'a': network1, 'c': network2, } self.test_context.stack.outputs = { 'b': '10.20.30.45', 'b-subnet_id': 1, 'foo-a-subnet-cidr': '10.20.0.0/15', 'foo-a-subnet-gateway_ip': '10.20.30.1', 'b-mac_address': '00:01', 'b-device_id': 'dev21', 'b-network_id': 'net789', 'd': '40.30.20.15', 'd-subnet_id': 2, 'foo-c-subnet-cidr': '40.30.0.0/18', 'foo-c-subnet-gateway_ip': '40.30.20.254', 'd-mac_address': '00:10', 'd-device_id': 'dev43', 'd-network_id': 'net987', } server = mock.MagicMock() server.ports = OrderedDict([ ('a', {'stack_name': 'b'}), ('c', {'stack_name': 'd'}), ]) expected = { "private_ip": '10.20.30.45', "subnet_id": 1, "subnet_cidr": '10.20.0.0/15', "network": '10.20.0.0', "netmask": '255.254.0.0', "gateway_ip": '10.20.30.1', "mac_address": '00:01', "device_id": 'dev21', "network_id": 'net789', "network_name": 'a', "local_mac": '00:01', "local_ip": '10.20.30.45', "vld_id": 'vld111', } > self.test_context.add_server_port(server) tests/unit/benchmark/contexts/test_heat.py:186: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ yardstick/benchmark/contexts/heat.py:307: in add_server_port network_name, port['stack_name'], self.stack.outputs) yardstick/benchmark/contexts/heat.py:315: in make_interface_dict subnet_ip = ipaddress.ip_network(subnet_cidr) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ address = '10.20.0.0/15', strict = True def ip_network(address, strict=True): """Take an IP string/int and return an object of the correct type. Args: address: A string or integer, the IP network. Either IPv4 or IPv6 networks may be supplied; integers less than 2**32 will be considered to be IPv4 by default. Returns: An IPv4Network or IPv6Network object. Raises: ValueError: if the string passed isn't either a v4 or a v6 address. Or if the network has host bits set. """ try: return IPv4Network(address, strict) except (AddressValueError, NetmaskValueError): pass try: return IPv6Network(address, strict) except (AddressValueError, NetmaskValueError): pass if isinstance(address, bytes): raise AddressValueError( '%r does not appear to be an IPv4 or IPv6 network. ' 'Did you pass in a bytes (str in Python 2) instead of' > ' a unicode object?' % address) E AddressValueError: '10.20.0.0/15' does not appear to be an IPv4 or IPv6 network. Did you pass in a bytes (str in Python 2) instead of a unicode object? ../../yardstick/yardstick_venv/lib/python2.7/site-packages/ipaddress.py:199: AddressValueError Change-Id: Ie3b087a26a054203573eaa9b13c3e90152bba6a9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-17Merge "test_tg_rfc2544_trex: speedup unittest, set time.sleep(0)"Ross Brattain1-4/+5
2017-07-17test_tg_rfc2544_trex: speedup unittest, set time.sleep(0)Ross Brattain1-4/+5
Change-Id: I6fdae629bdbd45cba715a838c41613b914a3abcb Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-17test_delete_all_calls_delete: fix delete mockRoss Brattain1-4/+6
we need to mock HeatStack.delete() before we instantiate otherwise we can't reach the instantiated objects delete() method we need to patch the class so we patch all instances Change-Id: I36f9476dcfb83e2d583c5a9f72dc27fce57258eb Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-16test_heat: don't waste 2 seconds in unittestRoss Brattain1-12/+2
remove duration checks and test with sleep 0 Change-Id: I22516cde56ac3a02358ca9c3e652cead10580d76 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-17Merge "test_attacker_baremetal: don't run local commands"Ross Brattain1-14/+12
2017-07-17Merge "Kubernetes (k8s) support"Jing Lu3-0/+294
2017-07-17Merge "add network info to topology"Rex Lee6-214/+596
2017-07-17Kubernetes (k8s) supportchenjiankun3-0/+294
JIRA: YARDSTICK-682 We decide to support k8s in E release. We need to discuss with openretriver team and then rewrite the ping test case under k8s as the first step. Change-Id: I3f81ebca8de5c1f3a8b7d42581cd7342dc320239 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-07-13test_attacker_baremetal: don't run local commandsRoss Brattain1-14/+12
these tests were failing to mock subprocess.check_output and thus were trying to run sudo commands on the local system. This is dangerous. Add the subprocess mock. Also mock the LOG object so we don't print bogus Runtime error tracebacks in the unittest logs when we test assertRaises() Change-Id: I01535f9952fbd95ce2f5972b641c51ff836e7e8c Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13test_monitor_command: mock LOG so we don't output errorRoss Brattain1-2/+6
Don't print fake tracebacks to the unittest logs Change-Id: I8a468b8c6566f02be88a9dd222567c14c66b0956 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-14Merge "Add API to get environments"Rex Lee1-0/+13
2017-07-14Merge "test_monitor_multi: speedup unittests, sleep less"Ross Brattain1-1/+1
2017-07-14Merge "test_storperf: speedup unittest, use time.sleep(0)"Ross Brattain1-2/+2
2017-07-13add network info to topologyRoss Brattain6-214/+596
we need to know which network each port is connected to so we can find VLAN or VXLAN ID. To do this we implement a new method for Contexts, Context.get_network(). This method is similar to Context.get_server(), it searches for a given network name in all the contexts. From this we generate a context_cfg["networks"] dict that stores all the network info for the nodes in the scenario. Then when we generate the topology for VNFD, we can lookup a given network by the vld_id and get the network_type, segmentation_id, etc. Then if we need to for example generated traffic on a given VLAN or VXLAN, we have this info available. Define default nd_route_tbl for ACL VNF we need default empty nd_route_tbl for IPv6 route. Change-Id: I9f9cfbd6acabeb4ae4675ca7354390efa57b29e7 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-07-13test_monitor_multi: speedup unittests, sleep lessRoss Brattain1-1/+1
Change-Id: I306e8e5525c3722179a5321988cad76190b93951 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13test_storperf: speedup unittest, use time.sleep(0)Ross Brattain1-2/+2
Change-Id: I3923d75c1ae7974c7803b0ad6997a5ad0fece11d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13test_pktgen_dpdk_throughput: speedup unittest, mock time.sleep()Ross Brattain1-8/+9
Change-Id: I74bbdee1a503ef9bad32db7d4444921f6730f465 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13test_vpe_vnf: speedup unittest, mock timeRoss Brattain1-19/+25
Change-Id: I046fae81c23555573df7d9e2e80995499062cf38 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13tg: speedup unittests, mock time.sleepRoss Brattain3-8/+12
Change-Id: Ia6207c898653c3ba21b22e9c309e7abb25d5cd32 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13pktgen: speedup unittest, mock time.sleepRoss Brattain1-9/+10
Change-Id: I0c6f6b68b30ae72887666a3b9e994dabf7c6a71d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13test_base: speedup unittest, wait for queue not emptyRoss Brattain1-2/+8
Change-Id: I41a72b1fd7099e404a1cf832de39f15bbc7b46e0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-13Add API to get environmentschenjiankun1-0/+13
JIRA: YARDSTICK-716 API: /api/v2/yardstick/environments METHOD: GET Change-Id: I46b7fb2b143fe76b6a0edbf1ecc8281187b85918 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-07-13Merge "NSBperf: fix bad sigint handler"Ross Brattain1-1/+1
2017-07-12NSBperf: fix bad sigint handlerRoss Brattain1-1/+1
This is why we don't do things at module import time. when we import this module it makes a bad sigint handler. Only load signal handlers at runtime. Also fix handler to take *args, **kwargs. Unittest failures: > time.sleep(0.01) E TypeError: handler() takes 0 positional arguments but 2 were given Change-Id: I4296a4bdef0e5f4d58b0503dcbc834f3bef0feeb Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-12test_nstat: decrease sleep time for unittestRoss Brattain1-3/+3
there is no reason to sleep for a whole minute during unittest Change-Id: I206229bcaa7a50af1859f7b04e521955bb6217d4 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-07-12Merge "Yardstick API architecture improvement"Rex Lee2-41/+23
2017-07-11Yardstick API architecture improvementchenjiankun2-41/+23
JIRA: YARDSTICK-710 Since we have the plan to upload api v2 and gui. We need to add put and delete method. So the architecture need to be improved. Change-Id: Ie20a79c26ef6c581897ce4e63980fa2895b162d2 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-07-10Change storperf target IPJingLu52-4/+4
As compass in master use OpenStack Ansible, the former IP "192.168.200.1" for Huawei pod-1 has been deprecated. Change-Id: Ia60885b36abec3455db2aa2939afbe2ef8bd79f5 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-07-10Merge "Yardstick install storperf update"Jing Lu2-1/+5
2017-07-07Yardstick install storperf updateJingLu52-1/+5
JIRA: YARDSTICK-702 Sicnce StorPerf has switched to use docker-compose to start container suite. The way Yardstick install storperf should also be updated. Change-Id: Idee05703b8ae5cd03bc214f598f56c8ac05ca755 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-07-06Merge "move flatten dict key to common utils"Kubi6-42/+51
2017-07-06move flatten dict key to common utilsrexlee87766-42/+51
So it can easily be used by other testcase to unify result JIRA: YARDSTICK-702 Change-Id: Id4fde38a9a0c2a87a6c870bdb7b0c8f3a3b371ac Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2017-07-06Merge "Blacklist TC011 from suites with ODL"Jing Lu5-0/+10
2017-07-05Merge "unify pod keywork so api can easily used"Kubi52-126/+172
2017-07-05Merge "Use "OS_INSECURE" variable as the insecure mode indicator"Kubi2-2/+2
2017-07-03Yardstick: Aarch64 jenkins slave supportAlexandru Nemes2-4/+12
Change-Id: I2d58c38d75fc1fe036769340e9fb02932f543510 Signed-off-by: Alexandru Nemes <alexandru.nemes@enea.com>
2017-07-03Blacklist TC011 from suites with ODLAlexandru Nemes5-0/+10
In deployments with ODL, security groups behave badly because of an IPv6 rule that causes IPv4 packets to be incorrectly routed. This is described in: https://jira.opnfv.org/browse/ARMBAND-61 As a consequence, Yardstick TC011 fails because iperf cannot create a connection. The proposed solution is to temporarily comment out TC011 from test suites with ODL. As mentioned here, security groups support for IPv6 is partial: artifacts.opnfv.org/ipv6/docs/gapanalysis/gap-analysis-odl-boron.html On nosdn deployments this issue is not reproducing and the test runs ok. JIRA: ARMBAND-269 Change-Id: Id5fede27262c21d777ec8e9988941643d16f9417 Signed-off-by: Alexandru Nemes <alexandru.nemes@enea.com>