aboutsummaryrefslogtreecommitdiffstats
path: root/tests/unit/orchestrator
AgeCommit message (Collapse)AuthorFilesLines
2017-07-17Merge "Kubernetes (k8s) support"Jing Lu1-0/+110
2017-07-17Kubernetes (k8s) supportchenjiankun1-0/+110
JIRA: YARDSTICK-682 We decide to support k8s in E release. We need to discuss with openretriver team and then rewrite the ping test case under k8s as the first step. Change-Id: I3f81ebca8de5c1f3a8b7d42581cd7342dc320239 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-07-13add network info to topologyRoss Brattain1-20/+26
we need to know which network each port is connected to so we can find VLAN or VXLAN ID. To do this we implement a new method for Contexts, Context.get_network(). This method is similar to Context.get_server(), it searches for a given network name in all the contexts. From this we generate a context_cfg["networks"] dict that stores all the network info for the nodes in the scenario. Then when we generate the topology for VNFD, we can lookup a given network by the vld_id and get the network_type, segmentation_id, etc. Then if we need to for example generated traffic on a given VLAN or VXLAN, we have this info available. Define default nd_route_tbl for ACL VNF we need default empty nd_route_tbl for IPv6 route. Change-Id: I9f9cfbd6acabeb4ae4675ca7354390efa57b29e7 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-06-20Acquire NSB specific data from Heat.Edward MacGillivray1-72/+256
First we add mac_address, subnet_cidr to Heat template outputs Then we convert those into a form for NSB and add vld_id. NSB also requires PCI Bus ID, kernel driver and dpdk_port_num. We get this by ssh-ing into instance and dumping sysfs We also need to fix allow for ssh key auth, and implement relative path file loading so NSB can find all its YAML files JIRA: YARDSTICK-580 Change history: don't hide heat create tracebacks we need tracebacks for debug vnf_generic: add task_path to scenario so we can load relative paths for vnf_generic we want to be able to load yaml relative to the task path For example: traffic_profile: ../../traffic_profiles/fixed.yaml topology: ping_tg_topology.yaml # TODO: look in relative path where the tc.yaml is found These need to be relative to samples/vnf_samples/nsut/ping/tc_ping_heat_context.yaml Add a scenario["task_path"] entry heat: log actual exception vnf_generic: replace list with set and iterate over values() some general refactors to remove redundact lookups and type conversions heat: provide mac_address, device_id and network_id from outputs We may need more information to dynamically determine test topology. Towards this end return more info in the heat template. We can return mac_address, device_id and network_id. Once we have this info we can add it to the context_cfg as an interfaces dict. add sample vnf ping multi-network test this test requires 3 network, one for mgmt and the other two for NSB traffic tests We have to make sure we don't use DPDK on mgmt interface because DPDK unbinds the driver heat: convert networks to OrderedDict so we can lookups networks as well as iterate over them in consisitent order heat: and vld_id to networks for vnf_generic vnf_generic uses vld_id Virtual Link Descriptor ID to identify interfaces Add the key to the networks dict and store in Networks object implement relative path file loading in vnf_generic in multiple places we need to load a file relative to the task path, so add open_relative_file_path and modify load_vnf_model to include the scenario_cfg parameter so we have access to task_path DRAFT: heat timeout support Heat stack in CI job failed due to some Nova issue. But then apparently yardstick kept running and took 180mins to timeout https://build.opnfv.org/ci/view/bottlenecks/job/bottlenecks-compass-posca_stress_ping-baremetal-daily-master/16/console We can add a Heat create timeout and fail faster if there is an error. The question is how long should we wait for a Heat stack to deploy. We can set a default and allow override in the heat context config, if users make complicated stacks heat: get netmask and gateway from heat outputs we have do some tricky business with finding the subnet cidr and converting it into netmask vnf_generic: get vpci, driver and dpdk_port_num use a big old find command to dump all the sysfs netdev info nicely. This was re-used from autotest FCoE tests. r"""find /sys/devices/pci* -type d -name net -exec sh -c '{ grep -sH ^ \ +$1/ifindex $1/address $1/operstate $1/device/vendor $1/device/device \ +$1/device/subsystem_vendor $1/device/subsystem_device ; \ +printf "%s/driver:" $1 ; basename $(readlink -s $1/device/driver); } \ +' sh \{\}/* \; This finds all PCI devices that are network devices, then dumps all the relevant info using /bin/sh. Then we parse this into a 'netdevs' dict inside the node_dict and also convert into VNF fields we need. vnf_generic: set node name for kpis node is a dict, so we have to use node_name vnfdgen: we CANNOT use TaskTemplate.render because it does not allow for missing variables, we need to allow password for key_filename to be undefined remove default ssh password hack, once rendering is fixed add new example tc_external_ping_heat_context Change-Id: If1fe0c1a2ab0a5be17e40790a66f28f706fa44d6 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-05-12Create flavor from heat contextDanielMartinBuckley1-0/+87
JIRA: YARDSTICK-582 Create a customizable flavor via heat context. All heat parameters are configurable including Core Affinity. The default flavor name is XXXX-flavor where XXXX is stackname. Flavor attributes are taken from the heat context file. If a flavor attribute is not used it takes default attribute value. If flavor name is not specified it uses the server name + "-flavor" or stack-name + "-flavor". Compute node specific attributes are configurable via "extra_specs" attribute. See https://docs.openstack.org/admin-guide/compute-flavors.html for details. Change-Id: If4015970b889b0b95bfa8eba9491ebf31e92f2c7 Signed-off-by: DanielMartinBuckley <daniel.m.buckley@intel.com>
2017-04-18Add SRIOV supportJing Zhang2-0/+59
A generic provider network solution is introduced. To identify whether a network specified in the test case is a provider network new attributes are introduced in the test case network section: networks: test-net: cidr: '192.168.1.0/24' provider: "sriov" physical_network: 'physnet1' If the "provider" attribute is present, the network is an existing provider network. If the value is "sriov", binding:vnic_type=direct is added to the interface in the heat deployment template. In orchestrator/heat.py, the interface creating functions are given a new parameter that tells if the network in use is a provider network. The benchmark/contexts/model.py is changed to store the value of the provider attribute from the test case and function calls to port creation is updated with the provider parameter. The same change is made in contexts/heat.py as well. Also calls for creating a new tenant network is replaced for creating a new provider network if the provider attribute is present. Update-1: Change test_model.py Update-2: Per comment, change comment style to """" Update-3: Change test_heat.py Update-4: Add unit test cases to pass coverage test Update-5: Add SRIOV provider network example in opnfv_yardstick_tc008.yaml Update-6: Per comment, remove empty line in orchestrator/test_heat.py Update-7: Per comment, change comment lines in orchestrator/test_heat.py Update-8: Add more unit test cases to pass coverage test Update-9: Change to create SRIOV provider network on the fly so as to support co-current test runs Update-10: Per comment, init physical_network to 'physnet1' Change-Id: I76004c4fcc9bffcfd8ed021fd647e0cecb346ef4 JIRA: YARDSTICK-612 Signed-off-by: Jing Zhang <jing.c.zhang@nokia.com>
2017-01-12heat: fix key_uuid formatRoss Brattain1-0/+26
The .format() won't work, since it can't slice the uuid We have to convert the uuid to string before we slice it. I thought .format() would implicitly call __str__() before applying width, but that is not the case. 'files/yardstick_key-{:.{width}}'.format(self.key_uuid, width=8)) We also need to define a constant short uuid lenght, we can't hardcode the length to 8 everywhere. Create a helper function to standardize the generation of the short key uuid and use that helper function everywhere Change-Id: I59e051bfe697587e967f93f5b8f209e0e7daa5c7 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>