aboutsummaryrefslogtreecommitdiffstats
path: root/tests/unit/network_services
AgeCommit message (Collapse)AuthorFilesLines
2017-10-13Move arp route tbl to script and update defailt vnf config filesDeepak S2-2/+5
Change-Id: I8674caa15c9fc32cfacb17f558da5fb31094877e Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-10NSB Prox vPE TestAbhijit Sinha1-51/+118
JIRA: YARDSTICK-802 Addition of Prox vPE test case - The tests supports BM, Openstack Heat - Supports 4 ports - Grafana dashboards included - Added support for parameters.lua for prox additional files - Unit tests for code coverage Change-Id: I5cccb351dacba88a293ae4b8aba1f0a803d62e6d Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-06Disable VNF deploy by defaultDeepak S2-2/+6
Change-Id: I27bcc41c855f34fb1fd0332fc24e7bf0b2af4ec2 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-04NSB PROX test hang fixesRoss Brattain10-56/+93
The PROX tests were hanging in the duration runner. These are fixes for various errors: raise error in collect_kpi if VNF is down move prox dpdk_rebind after collectd stop fix dpdk nicbind rebind to group by drivers prox: raise error in collect_kpi if the VNF is down prox: add VNF_TYPE for consistency sample_vnf: debug and fix kill_vnf pkill is not matching some executable names, add some debug process dumps and try switching back to killall until we can find the issue sample_vnf: add default timeout, so we can override default 3600 SSH timeout collect_kpi is the point at which we check the VNFs and TGs for failures or exits queues are the problem make sure we aren't silently blocking on non-empty queues by canceling join thread in subprocess fixup duration runner to close queues and other attempt to stop duration runner from hanging VnfdHelper: memoize port_num resource: fail if ssh can't connect at the end of 3600 second test our ssh connection is dead, so we can't actually stop collectd unless we reconnect fix stop() logic to ignore ssh errors Change-Id: I6c8e682a80cb9d00362e2fef4a46df080f304e55 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03Enable multi-port perf in trex as TGDeepak S3-15/+11
set TRex -c option for threads per port based on hardware number of queues. We can't auto-detect number of queues and we can't use more than one thread per core on systems with single-queue interfaces, so move the option to the config file options: tg_0: queues_per_port: 2 also enable trex debug by removing >/dev/null redirection options: tg_0: trex_server_debug: true Change-Id: I46da187849282bf28f4ef5b333e1ae890e202768 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03add collectd resource node capabilityRoss Brattain2-31/+59
allow manually adding collectd nodes using Node context. if a node is present with a collectd config dict then we can create a ResourceProfile object for it and connect to collectd. example nodes: - name: compute_0 role: Compute ip: 1.1.1.1 user: root password: r00t collectd: interval: 5 plugins: ovs_stats: {} Change-Id: Ie0c00fdb58373206071daa1fb13faf175c4313e0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03drain runner queue and undo cancel_join_threadRoss Brattain1-2/+3
Sometimes the runners can hang. Initially debugging lead to the queue join thread, so I thought we could cancel all the join threads and everything would be okay. But it turns out canceling the queue join threads can lead to corruption of the queues, so when we go to drain the queues the task hangs. But it also turns out that we were not properly draining the queues in the task process. We were waiting for all the runners to exit, then draining the queues. This is bad and will cause the queues to fill up and hang and/or drop data or corrupt the queues. The proper fix seems to be to draining the queues in a loop before calling join with a timeout. Also modified the queue drain loops to no block on queue.get() Revert "cancel all queue join threads" This reverts commit 75c0e3a54b8f6e8fd77c7d9d95decab830159929. Revert "duration runner: add teardown and cancel all queue join threads" This reverts commit 7eb6abb6931b24e085b139cc3500f4497cdde57d. Change-Id: Ic4f8e814cf23615621c1250535967716b425ac18 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-30Auto create ixia config based on the traffic profileDeepak S1-5/+5
Change-Id: I031cc7f24f0c0816eb577a4d1606a714f68a5f83 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-30Addition of Prox NSB BNG and BNG-QoS testAbhijit Sinha6-272/+602
JIRA: YARDSTICK-802 Added Prox BNG and BNG-QoS Test - The tests supports BM, Openstack Heat - Supports 4 ports - Test added for BNG traffic profile - Fixed the Prox heat test cases with proper upstream and downstream links - Grafana Dashboard for BNG & BNG-QoS added - Increased the test Duration to 300 TODO: - Test does not Terminate correctly Update: Added new helper class for run_test: Genric, MPLS and BNG tests. Change-Id: Ib40811bedb45a3c3030643943f32679a4044e076 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-09-30collectd: write config file from Jinja2 templateRoss Brattain2-133/+40
We have the collectd.conf inside the python package so instead of copying it from various places, write the template directly to the remote system. collectd: read collect.conf template with pkgresources read the collectd.conf file as a string directly and upload without creating temp file use Jinja2 template, disable failing plugins use proper Jinja2 template, disable the plugins that were failing to load and blocking startup add support for per-testcase collectd.conf config using YAML add support for custom interval, default is 25 seconds Change-Id: Id904f7b7c9f41a9dd7adf5dfa06c064d65c25d2d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-30Adding multi-port support for ixia taffic generatorDeepak S1-8/+4
Change-Id: Ic8aa130f3cdc7bd8dec39d06a6b824340bf658b2 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-30Fix vPE VNF characterization issues.Deepak S1-10/+130
Change-Id: Ia934128777d2839f6d2b940857c266fc3e2bd4a1 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-09-25tg_rfc2544_ixia: log exceptions and fix list iterRoss Brattain1-7/+11
Change-Id: Ia9722604b7c8ae23e784e780f113d012de544d4b Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-25tg_rfc2544_ixia: use traffic id from JSON to update macRoss Brattain1-4/+5
we were using raw sort index of the interfaces to set the MAC address, but we should be using the traffic id from the static JSON instead. Change-Id: I13284db04abb3eaf8c9826974a9e5aa1c37b3891 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-25cgnapt: mock time.sleep in unitestsRoss Brattain1-2/+4
Change-Id: I26957977e6dcd0392078a543a6907a550711c702 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-25prox: fix TG KPIsRoss Brattain2-9/+8
The problem is that we share the same ProxResourceHelper for both VNF and TG. For VNF we want to talk to resource.py and get collectd KPIs. For TG we need to read from the queue the TG calculated KPIs and we also want collectd KPIs. workaround is to use a different method name collect_collectd_kpi for VNFs Change-Id: Icc2132758e37ce210f5600a0cd433077930208e5 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-25Addition of PROX NSB tests to yardstickDanielMartinBuckley1-10/+30
JIRA: YARDSTICK-802 Addition of PROX L2FWD_Multiflow, ACL, Load Balancing plus grafana dashboards Supports 2 and 4 port Baremetal & Heat Change-Id: I1f3990d5451de265ee3901302569c355ece3b146 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-09-25prox: use find_relative_file when uploadingRoss Brattain1-1/+1
the prox files were being found correctly. if we use find_relative_file they will lookup relative to the task_path Change-Id: Ifde5d07df5ccfbfeba015b2f43bd8b53e89a00b7 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-25prox: pass prox_config_dict between Processes using queueRoss Brattain6-74/+61
we generate the prox_config_dict in the _run Process, but we also need it in the _traffic_runner Process to get core info. use a queue to pass the config list between the processes enable collect_kpi Change-Id: Ibaf41d606e559a87addf43d6ddaed206dbd2d20c Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-19NSB: count from 0, vnf_0, tg_9, private->uplink, public->downlinkRoss Brattain18-157/+165
Also rename private to uplink, public to downlink for scale-out template we need to count from 0 so we can use range() without +1/-1 errors vnf_0, vnf_1 tg_0, tg_1 also fix Ixia defaults Change-Id: I6aecfbb95f99af20f012a9df19c19be77d1b5b77 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-18Fixing vPE config creation anf bring up issues.Deepak S1-2/+0
Change-Id: Icf7a01a053495e6d96bd664d6ceda8964fa437eb Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-18Fix all the exception while genereating the latency trafficDeepak S1-3/+4
Change-Id: I0b25e704b29fc68678eaa29d9e1d1eb04ee94e3e Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-18NSB: fix port topologyMartin Banszel24-816/+1445
Add a new PortPair class to resolve the topology into list of public and private ports. Before we were calculating public/private in multiple locations and using different conventions. In addition for all the DPDK test we need to use the DPDK port number and no rely on interface ordering or interface naming conventions. We used to use xe0 -> 0, xe1 -> 1, etc. This is not the DPDK port number. Use the new dpdknicbind_helper class to parse the output of dpdk-devbind.py to find the actual DPDK port number at runtime. We then use this DPDK port number to correctly calculate the port_mask_hex. The port mask maps the DPDK port num (PMD ID) to the LINK ID used in the pipeline config We also need to make sure we only use the interfaces matched to the topology and not use all the interfaces, because in some cases we will have unused interfaces. In particular TRex always requires an even number of interfaces, so for single port TRex tests we have to create the second port and not use it. Thus we had to modify the traffic generator stats code to only dump stats for used ports and no unused ports. Ixia was using interface ordering to map to Ixia ports, instead we use the dpdk_port_num which must be hardcoded for Ixia. Renamed traffic_profile.execute to traffic_profile.execute_traffic so we can trace the code easier. We pass the port used by the traffic profile to generate_samples so we don't get stats for unused ports. Fixed up vPE config creation and bring up issues. Fixed up CGNAPT and UDP_Replay to work correctly. Tested with 4-port scale-out Change-Id: I2e4f328bff2904108081e92a4bf712333fa73869 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-14Merge "ssh fix, always wait"Ross Brattain1-0/+2
2017-09-13Heat: support non-mesh network toplogyRoss Brattain1-3/+9
Previsouly we added all servers to every network in Heat in a full mesh. To more closely replicate test topology and to limit then number of ports we need to all each server to specify which ports should be connected to each network. This should also allow for some kind of multiport setup. Add optional network_ports dict to each server with network to port_list mapping match inteface based on port name or vld_id replace vld_id matching with network name matching, since network_name == vld_id Change-Id: I5de46b8f673949e3c17d8df6fa96f055c43886ce Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-13ssh fix, always waitRoss Brattain1-0/+2
Change-Id: I1c529eeb0ef47752ed15e3e7941f57f7793ebfd4 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-11Added line parser to INI parserEdward MacGillivray1-12/+40
Line parser handles comments, keys and values and makes exceptions. Change-Id: I5cd3612ffd8cb08b14051bd0ef4b757c310f77bd Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-07Merge "Adding ixia latency support for dynamic cgnapt"Ross Brattain2-1/+4
2017-09-07Adding ixia latency support for dynamic cgnaptDeepak S2-1/+4
Change-Id: I346f6064c39cb5662c2b17ca0f520addbe5eae4c Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-09-05Add fixes for heat deployed UDP_Replay and TRexMartin Banszel4-465/+698
- Added a PROTOCOL_MAP to map the protocol names to codes -- the scapy requires the code, it fails if the proto is set e.g. to 'udp' - ip addresses must be str, not unicode -- explicit conversion to str added - removed unittest for setup_vnf_environment in test_tg_trex.py as it is the same function as already tested in test_sample_vnf.py - traffic_profile refactored -- code repetition decreased, unittest adapted Known issues: - there is a an attempt to stop already stopped trex. It fires an exception that stop command is issued on the disconnected client. Change-Id: I87e9029630f48b30e8f5b4f9d88ab3b25fd65f03 Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
2017-09-05Merge "Addition of Prox NSB changes in yardstick"Ross Brattain11-823/+1209
2017-09-05Merge "Adding intel_pmu tools plugin for collectd"Ross Brattain1-0/+5
2017-09-04Adding intel_pmu tools plugin for collectdDeepak S1-0/+5
Change-Id: I81ff3d43d209e98188855c8b2eb302835bb5d417 Signed-off-by: Neha Vadnere <neha.r.vadnere@intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-04Fix Ixload KPIs collection & hang issues.Deepak S1-1/+1
Change-Id: If679333dc1cb9e041a332fb374c55f72eaab1b28 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-04Addition of Prox NSB changes in yardstickabhijitsinha11-823/+1209
JIRA: YARDSTICK-802 Addition of Prox L2Fwd, MPLS test cases for BM and Heat. updates: Most of tg_prox and prox_vnf were absorbed into the base classes. delete most of ProxDpdkVnfSetupEnvHelper, it is handled by DpdkVnfSetupEnvHelper baseclass use standard _build_pipeline_kwargs methods don't use terminate() use baseclass version add new method kill_vnf that runs pkill -x replace resource_helper.execute() with vnf_execture for dumping stats In order to share code between tg_prox and vnf_prox refactor to have tg_prox hold and wrap a ProxApproxVnf instance and call methods on that class. Do this instead of multiple-inheritance. Implement ProxApproxVnf.terminate() using prox socket command based exit, (stop_all, quit, force_quit). vnf_execute calls resource_helper.execute() which calls socket methods on the sut object. Since tg_prox wraps the VNF object, we can call terminate on the VNF object and it should work correctly. move prox config generation to parent process we need to get core number info from config file inside the TG processes, so we need to generate the config in the parent process so the data is copied to the child during the fork. moved more config file methods to the setup_helper class. we run force_quit after quit, so the socket should already be closed this will trigger socket error, so add _ignore_errors option for vnf_execute to ignore socket errors Fixed the terminate issue. Added MPLS tests. Added TG Stats in_packet/out_packet Fixed compile (pep8) issues Fixed MPLS TG port stats, in/out packets Added Grafana dashboards for L2FWD and MPLS Traffic profiles modified for tolerated loss and precision as per DATS tests. Added unit test case for Mpls Single port test stats collection support. Change-Id: Idd9493f597c668a3bb7d90e167e6a418546106e8 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-01Merge "Adding support for updating the count/packetsize for given testcase"Ross Brattain1-10/+26
2017-09-01sample_vnf: default to 16GB of 2048Kb hugepagesRoss Brattain1-1/+1
8192 * 2048kB = 16GB Change-Id: I82bf420794e5174e88cfaea08b9fab0d77c2be7f Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-31Adding support for updating the count/packetsize for given testcaseDeepak S1-10/+26
Change-Id: I3ec1a6d3710d44df5ddac6bd8967d28ad58e8d33 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-09-01Merge "Added TC for vFW in heat context with ixia TG"Ross Brattain2-6/+11
2017-08-31Added TC for vFW in heat context with ixia TGMaciej Skrocki2-6/+11
- added common method to get relative paths - added 'Ixia' APP_NAME Change-Id: I7966798bab71af66d3efbeb1e13b07e8fbb41e88 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com>
2017-08-31Enable update ip headers for given testcaseDeepak S1-12/+12
Change-Id: I008b3f09695f5e3f484b39d4e70b83e5942de863 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com>
2017-08-25Trex: fix KPI collectionRoss Brattain1-1/+1
return super result Change-Id: I723a37281da15c1887ae1b3cf91d7e957b1924d1 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-24Standardized TRex client library pathMaciej Skrocki23-1376/+55
- path should be defined via TREX_CLIENT_LIB environmental variable e.g. TREX_CLIENT_LIB=/opt/trex_client/stl - refactored unit tests Change-Id: I18767e48daf774432c010f1b88d18a4f0ee4e156 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-23Merge "samplevnf_helper: use network address"Ross Brattain1-0/+2
2017-08-21samplevnf_helper: use network addressRoss Brattain1-0/+2
use network address with netmasks to be proper ports_mac_list is no longer valid, remove it nd_route_tbl needs to default to something otherwise the VNF will segfault if it receives IPv6 on the port, which it will because something in Neutron is sending out IPv6 packets. disable use of the routing table gateways to set arp add. We set the next hop IP to always be the TG IP address, so we need to always use the TG IP in arp add to send to the TG MAC address don't use gateways to get local addresses. we can't use gateways because with OpenStack if we define a gateway is breaks the default route and we can no longer connect to the instance via floating IP. Change-Id: I0ebefe8ac09812b6030046f73bf772edda1c7d27 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-21Re-define the framesize and flow dynamic define in testcaseDeepak S2-12/+19
This patch adds the framesize and flow into test option instead of adding a seperate file to avoid the multiple file update incase of ip change. Change-Id: Ic473c73773ad36422ecc02618b8c646a5336b70a Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-08-19Merge "Fix IxLoad traffic generator issue around running the traffic."Ross Brattain1-1/+23
2017-08-19Fix IxLoad traffic generator issue around running the traffic.Deepak S1-1/+23
Change-Id: Ic1f13c0d28c1a1b01bbf3c8a6a618a5b3ab5bbeb Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-19Fix parsing of the results from collectd pluginsDeepak S1-2/+2
Change-Id: I3f7b9ca17164564b11517116e7e73b47f42243b9 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-08-17Fix import error in IxNetworkDeepak S1-9/+4
This patch fixes import error related to ixnetwork and do not wait for TG server to start as IXIA is always running :) Change-Id: I49d6b100eadafad75431cb8974605a6faa496f23 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>