summaryrefslogtreecommitdiffstats
path: root/tests/unit/network_services
AgeCommit message (Collapse)AuthorFilesLines
2018-03-22Merge "Make Sample VNF hugepages size configurable"Ross Brattain1-2/+20
2018-03-16Merge "Replace assert statements in tests"Abhijit Sinha1-1/+1
2018-03-09Do NOT hardcode interface speed for PROX testsDanielMartinBuckley1-11/+19
JIRA: YARDSTICK-1035 Do not hardcode NIC/interface speed in PROX test. Test assumes NIC used is 10Gbps. This is incorrect. It could support 1Gbps, 10Gbps, 25Gbps, 40Gbps or something else. This is used to calculate pps (Packets Per Second) In Baremetal the NIC speed could be extracted. however when run on a virtual machine this is not possible. Solution: Add in options section of test file. eg. Options: interface_speed_gbps: 10 Where 10 refers to a 10Gbps. In a setup where multiple interfaces are used. This will refer to the speed of the slowest connection. Change-Id: I89ab16479a2cdd1d79e52cbcc5a972762c60d057 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-03-09Make Sample VNF hugepages size configurableRodolfo Alonso Hernandez1-2/+20
The amount of hugepages claimed for a Sample VNF is always 16GB. This value is excesive for most of the Sample VNF applications (except for vPE). Making this parameter configurable we allow to spawn smaller VMs by using less hugepages (in case of StandAlone and OpenStack deployments). Because this parameter depends on the Scenario and the type of VNF executed, the parameter is located in: scenarios: {options: hugepages_gb} # number of GB of hugepages claimed PENDING: document this new parameter. A new userguide section should be created to document all "scenario" sections and parameters. JIRA: YARDSTICK-1061 Change-Id: I6f082e105289bd01781be18f2fecbe0ba2fdfdee Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-06Replace assert statements in testsEmma Foley1-1/+1
JIRA: YARDSTICK-966 Change-Id: Ic98711fa1a31d27fcb60bd96b1b3e22b5cca86b3 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-03-02Merge "VNF interfaces are sorted by "vpci" address before being populated"Ross Brattain1-4/+17
2018-03-02VNF interfaces are sorted by "vpci" address before being populatedRodolfo Alonso Hernandez1-4/+17
In [1], VNF interfaces in TG PROX are sorted by "vpci" address, before this value is populated in "vnfd_helper". "vpci_if_name_ascending" is only used in TP ProxPofile [2] to generate the stats. This patch delays this sorting process until the stats generation. [1]https://github.com/opnfv/yardstick/blob/a74ad5a1ec1a73389c5983440b2031b0bc72cea1/yardstick/network_services/vnf_generic/vnf/tg_prox.py#L62-L64 [2]https://github.com/opnfv/yardstick/blob/a74ad5a1ec1a73389c5983440b2031b0bc72cea1/yardstick/network_services/traffic_profile/prox_profile.py#L33 JIRA: YARDSTICK-1044 Change-Id: I988dc48f9a82baa1c64f728d9e6d54f2f4bae010 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-02Remove main() and __main__ from tests.Emma Foley28-69/+1
Removes the unnecessary main() functions from tests. Also removes shebang (#!) where it appears at the top of files. JIRA: YARDSTICK-861 Change-Id: I79180d1eb9c5bce640142dd62ce28c7437c1b210 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-03-02Replace assertEqual(None, xx) with assertIsNone(xx)Emma Foley14-62/+52
Change-Id: Ie956d8064a8fbcbd3d56c5a79c4c613d35184af4 JIRA: YARDSTICK-942 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-03-02Make files pep8 compliant before replacing assertEqual(None, xx)Emma Foley2-265/+199
* tests/unit/network_services/helpers/test_samplevnf_helper.py * tests/unit/network_services/traffic_profile/test_rfc2544.py * yardstick/tests/unit/common/test_ansible_common.py JIRA: YARDSTICK-942 Signed-off-by: Emma Foley <emma.l.foley@intel.com> Change-Id: Ib3c71db5f5774d2bfb3a9cbd260b838eb5501448
2018-03-01NSB: move interface probe to VNF, and attempt driver-only probe firstRoss Brattain4-33/+417
If no devices are present we can't detect MAC address so we can't match Heat ports to interfaces. If only the driver is missing we can try to probe the driver using lspci. We can use lspci to ask the kernel what driver it should use for the PCI device. If we can't probe at all because the device is already bound, we can use dpkd-devind to find all the PCI address we care about and create a map with PCI device and real kernel driver. Then we can dpdk force rebind to the kernel driver. Once we have rebound to the kernel driver we can detect MAC address and all the other attributes that are required. Fix VnfSshHelper to allow override of wait timeout And a bunch of other refactors that got swept up in this JIRA: YARDSTICK-835 Change-Id: I14cb657ed289a77941d048345d06ced5b5d5da52 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-03-01vFW scale-up template.Mytnyk, Volodymyr1-1/+16
Added topology and traffic profile templates Added support for using JinJa2 templates in topology definition Added support for static pipeline configs for SampleVNFs JIRA: YARDSTICK-1043 Change-Id: Iab99fd5b5ad69ca32ee70b9fe47779387ad27e7f Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-03-01Add arguments to the traffic profile renderRodolfo Alonso Hernandez1-2/+2
In order to render configurable traffic profiles in NSB test cases, a new variable is introduced: "extra_arg". The content of this variable is added to the VNFD render data, under a key called "extra_args". This will allow the user to define Jinja templates for traffic profiles. E.g.: $ cat test_case_definition.yml scenarios: - type: NSPerf traffic_profile: traffic_profile.yml extra_args: vports: 10 $ cat traffic_profile.yml {% set vports = get(extra_args, 'vports', '0') or 4 %} {% for vport in range(vports|int) %} uplink_{{vport}}: data... {% endfor %} JIRA: YARDSTICK-946 Change-Id: Ib3c1f2d89efa012772edf2156e97d5f4742a6b80 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-01Import "traffic_profile" modules only onceRodolfo Alonso Hernandez7-55/+66
"traffic_profile" modules should be imported only once. Every time TrafficProfile.get is called, the modules under "yardstick.network_services.traffic_profiles" are loaded [1]. Instead of this, the modules should be registered only once the first time "yardstick.network_services.traffic_profiles.base" is loaded. This will reduce the execution time and will avoid unnecessary calls. [1] https://github.com/opnfv/yardstick/blob/d2c7cc4e9768ed003257a95c92cdb278d516761b/yardstick/network_services/traffic_profile/base.py#L36-L37 JIRA: YARDSTICK-951 Change-Id: Ia3565378ba3a1377fcb0aea8bda50ef8189414fd Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-28NSB: Rename traffic_profile to trex_traffic_profileRoss Brattain3-16/+12
Make it more clear that traffic_profile is not a generic class. Eventually we can refactor a more generic traffic profile. Change-Id: I1bf44a8cafcdeb8d74efb9e85a34f6d7b526d036 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-28Merge "Improve SampleVNF hugepages setup"Abhijit Sinha1-36/+21
2018-02-28Merge "Addition of storage of extra counters for Grafana"Abhijit Sinha3-19/+111
2018-02-28Addition of storage of extra counters for GrafanaDanielMartinBuckley3-19/+111
JIRA: YARDSTICK-1036 This stores a number of extra counters in influxdb for Prox test cases. It also stores existing counters with a "succcess_" tag. Previously throughput where stored without success or failure indication. Also "Result_" counters are also stored. These can now be used by Grafana to graph output. Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-02-17Fix error in address input format in "_ip_range_action_partial"Rodolfo Alonso Hernandez1-12/+33
IP address format introduced in [1] should be unicode instead of string. "ipaddress.IPv4Address(min_value)" doesn't parse correctly the input parameter unless the parameter is in unicode format; this is valid both for Python version 2 and 3. Execution error if the parameter is a string: >>> int(ipaddress.IPv4Address('10.0.3.2')) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/local/lib/python2.7/dist-packages/ipaddress.py", line 1391, in __init__ self._check_packed_address(address, 4) File "/usr/local/lib/python2.7/dist-packages/ipaddress.py", line 554, in _check_packed_address expected_len, self._version)) ipaddress.AddressValueError: '10.0.3.2' (len 8 != 4) is not permitted as an IPv4 address. Did you pass in a bytes (str in Python 2) instead of a unic [1]https://github.com/opnfv/yardstick/blob/e5775e7efbc55f116b4d4ac11ff87b8d8553247e/yardstick/network_services/traffic_profile/traffic_profile.py#L87-L88 JIRA: YARDSTICK-996 Change-Id: Ic727a79044834b181c99789f0f5efc21c68f0ff2 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-16Merge "Remove tool provisioning from DpdkVnfSetupEnvHelper._setup_dpdk"Rodolfo Alonso Hernandez1-28/+25
2018-02-15NSB: Ixia remove unused traffic_generator argRoss Brattain1-43/+15
also fix pylint unittest warnings JIRA: YARDSTICK-1014 Change-Id: I4ff9769fdca89c6fc1fb9ca62e9f8ea6b174681e Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-14NSB: fix test_vpe_vnf.pyRoss Brattain1-1/+1
Change-Id: Ie1da572e2ac00e380b25f8e22f5aa9059dcb5238 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-14NSB: fix pylint warnings in test_tg_ixloadRoss Brattain1-2/+9
Change-Id: Ieb58167d8b20e0de32578b3df105a141507869d5 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-14NSB traffic_profile: fix pylint warnings and return partialRoss Brattain1-74/+118
also fix unittests Change-Id: Ie3026f5a0df8e690271afb71fe36ac531cbae2a0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-12Remove tool provisioning from DpdkVnfSetupEnvHelper._setup_dpdkRodolfo Alonso Hernandez1-28/+25
Both "uio" and "igb_uio" drivers are present in the VM image generated using "./nsb_setup.sh" script. "igb_uio" driver is compiled along with the DPDK library compilation. Tool "nsb_setup.sh" provisioning and execution should be removed from this function because there is not needed anymore. In case "igb_uio" driver is not loaded, an exception should be raised. JIRA: YARDSTICK-999 Change-Id: I89174f84ac36d8231587402c96751746cb18e290 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-12Merge "vpe: convert DPKD_PORT to LINK ID"Emma Foley1-0/+5
2018-02-06vpe: convert DPKD_PORT to LINK IDRoss Brattain1-0/+5
http://dpdk.org/doc/guides/sample_app_ug/ip_pipeline.html#application-resources-present-in-the-configuration-file LINK instances are created implicitly based on the PORT_MASK application startup argument. LINK0 is the first port enabled in the PORT_MASK, port 1 is the next one, etc. The LINK ID is different than the DPDK PMD-level NIC port ID, which is the actual position in the bitmask mentioned above. For example, if bit 5 is the first bit set in the bitmask, then LINK0 is having the PMD ID of 5. This mechanism creates a contiguous LINK ID space and isolates the configuration file against changes in the board PCIe slots where NICs are plugged in. Change-Id: I6e449272cfcfb2b2a75c246f7f569e3f923da245 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2018-02-06Improve SampleVNF hugepages setupRodolfo Alonso Hernandez1-36/+21
The goal of this function is to: - Read the default hugepage size. - Set 16GB of hugepages. - Check if the status of the last action. According to [1], the default hugepage size could be read in "/proc/meminfo", always in kB. Then "/proc/sys/vm/nr_hugepages" could be used to set the number of default hugepages. [1] https://www.kernel.org/doc/Documentation/vm/hugetlbpage.txt JIRA: YARDSTICK-997 Change-Id: I762d1b16294ba1c1c2feee56610819ac358c7410 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-02-05Remove references to "dpdk_nic_bind" utilityRodolfo Alonso Hernandez5-45/+2
In DPDK 16.07 [1], "dpdk_nic_bind" utility was renamed to "dpdk-devbind". This patch removes all references to this previous naming to avoid confusions. [1] https://dpdk-guide.gitlab.io/dpdk-guide/setup/binding.html JIRA: YARDSTICK-995 Change-Id: I827c4c11c9e9e519f33f21b80459e7d65e51545e Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-01-26Merge "Replace assertEqual(x, True|False) with assert[True|False](x)"Ross Brattain2-2/+2
2018-01-25Replace assertEqual(x, True|False) with assert[True|False](x)Emma Foley2-2/+2
Change-Id: Id19df79b4d27aab1a83d8350ce6395e87c13472b JIRA: YARDSTICK-903 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-01-25Replace assertEquals with assertEqualEmma Foley4-15/+14
unittest.assertEquals is deprecated[1], and has been replaced with unittest.assertEqual. [1] https://docs.python.org/2/library/unittest.html#deprecated-aliases Change-Id: I9c6320e3a9ec5528036b529a9c32fc48b0bcfd62 JIRA: YARDSTICK-864 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-01-25Make files pep8 compliant before using assertTrue|FalseEmma Foley2-8/+6
JIRA: YARDSTICK-903 Signed-off-by: Emma Foley <emma.l.foley@intel.com> Change-Id: Id7912b5ddee36e7366bcfa824379853efd0a89f1
2018-01-23Rename ResourceProfile.check_if_sa_running()Emma Foley4-23/+28
* Update log message and rename method to make debugging easier * Fix pep8 violations in touched files JIRA: YARDSTICK-859 Change-Id: Id138d72cd8557ffacd5dcc81d06feeb484e13625 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-01-04Remove tool provisioning in PROX helperRodolfo Alonso Hernandez3-81/+74
Tool provisioning in PROX setup environment helper is not needed [1]. The tool (PROX traffic injector) is already provided during the VNF building: ./ansible/nsb_setup.yml --> ./ansible/build_yardstick_image.yml --> ./ansible/ubuntu_server_cloudimg_modify_samplevnfs.yml --> ./ansible/roles/install_samplevnf [1]https://github.com/opnfv/yardstick/blob/master/yardstick/network_services/vnf_generic/vnf/prox_helpers.py#L641 JIRA: YARDSTICK-872 Change-Id: I0f925a7967a35a97901fbe5053793a791a7b1b01 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-01-03Make GenericVNF an abstract classRodolfo Alonso Hernandez13-397/+255
GenericVNF class is now an abstract class. Only optional methods are implemented. Mandatory methods: - instantiate - wait_for_instantiate - terminate - scale - collect_kpi. JIRA: YARDSTICK-866 Change-Id: Ia8766f9f98816e11894d1e72b0f3bd573d091d99 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2017-12-19Variable local_iface_name is read before it is setJiri Prokes1-4/+4
Moving variable setting before reading Verified via TC: yardstick/samples/vnf_samples/nsut/ping/tc_ping_heat_context.yaml JIRA: YARDSTICK-899 Change-Id: Ia2feac1ed4e67dccd02446ba27afc9d40e87be35 Signed-off-by: Jiri Prokes <jirix.x.prokes@intel.com>
2017-12-16samples: Add generic L3 forwarder testsDino Madarang1-0/+267
A generic throughput test case that can be used as a stub code for a Linux-based VNF configured as an L3 forwarder. Supported context: * Standalone OVSDPDK and SRIOV * Baremetal Code changes: * Allow pmd-cpu-mask and lcore mask for OVS DPDK * router_vnf.py - configures interface IP addresses and static arp entries using ip command * NFVi KPIs * Allow cputune tag for standalone context to be able to PIN on NUMA 1 cpus SRIOV Test cases: * RFC2544 Ethernet framesizes, 128K Flows * 2,4 and 6 ports * 2 and 3 vcpus per port * OVSDPDK Test cases: * RFC2544 Ethernet framesizes, 128K Flows * 2 and 4 ports * 2 vcpus per port * 2 PMD threads per port TODO: * Documentation * Add 6 ports tests References: * router_vnf.py is based on sample_vnf.py * tc_*.yaml files are based on acl/vfw test case files Added unitests Added get_stats to parse ip -s link Change-Id: Id1b969d5420dfcab7c1e695acbd2cd1655747efe Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Signed-off-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Reviewed-by: Alain Jebara <alain.jebara@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Emma Foley <emma.l.foley@intel.com> Reviewed-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-12-15NSB: Fix standalone.model.Libvirt SR-IOV modelingDino Madarang1-2/+81
Fixed standalone.model.Libvirt SR-IOV XML interface modeling, acording to [1]: - All PCI attributes now are printed in hexadecimal format. - The PCI address is now added in the correct section, 'interface'. network_services.utils.PciAddress was refactored to accept both 'domain: bus:slot:function' and 'bus:slot:function' format inputs. This class is used as input in the previous class, Libvirt, to print in XML the PCI address of a SR-IOV interface. network_services.utils.PciAddress.parse_address is now deprecated. Instead the class standard instantiation must be used: libvirt_obj = utils.PciAddress(text_with_address) A deprecation decorator is implemented along with this patch. This decorator is used for the first time in the previously mentioned function. This decorator stores every decorated function name and deprecation message and raises a logging warning message the first time this function is used. [1] https://goo.gl/so2Mrp Change-Id: I22e95c488e27d6e2a8fdf6c1a07faab275fa6bba Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Reviewed-by: Alain Jebara <alain.jebara@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2017-11-17Make GenericTrafficGen class abstractRodolfo Alonso Hernandez2-74/+33
GenericTrafficGen class is now an abstract class. Only optional methods are implemented. - 'run_traffic' and 'terminate' are mandatory. - 'listen_traffic', 'verify_traffic' and 'wait_for_instance' are optional. By default these methods doesn't execute any action. JIRA: YARDSTICK-853 Change-Id: I2befdaa337af79cc2364bdd7c66183c31c5ab69a Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2017-11-16NSB "Prox" : Cleanup duplicated traffic profileAbhijit Sinha1-95/+0
JIRA: YARDSTICK-848 The NSB PROX MPLS test uses Binsearch traffic profile and the mpls traffic profile is a duplicate. Change-Id: Ie2124cebf306fd6917b70ecd7c23ae12ef4850dc Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-11-14NSB TRex: convert DPDK port number to logical TRex port numberRoss Brattain1-0/+54
when we create TRex config we sort based on PCI bus address and create a logical port ordering. We need to save this port ordering and re-use it everywhere. redirect vnfd_helper.port_num() to resource_helper.port_num() to use the logical mapping Change-Id: Ibff628556d5e11e686e15716a66a3210758c4ff0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-11-10Merge "Remove ↵Ross Brattain1-14/+0
network_services.vnf_generic.vnf.prox_helpers.ProxSocketHelper.rx_stats"
2017-11-10Merge "pmu: remove event_download_local workaround script"Ross Brattain1-4/+0
2017-11-09Merge "NSB Prox LW_AFTR Test"Ross Brattain1-0/+115
2017-11-08Remove network_services.vnf_generic.vnf.prox_helpers.ProxSocketHelper.rx_statsEmma Foley1-14/+0
* Remove the method which is unused and is marked as deprecated. Change-Id: Ie64084fcd26985283c664445b173a757d3d908ab JIRA: YARDSTICK-838 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2017-11-08pmu: remove event_download_local workaround scriptRoss Brattain1-4/+0
intel_pmu needs to download a config file based on the CPU model. When generating VNF images we don't have access to the actual vCPU that will be used, so we can't predownload. This code was meant to be a fix for that by downloading all the configs and then selecting one that matched the vCPU. However we have license issues with intel_pmu enven GPLv2 code, so remove it for now. Change-Id: I5257ff7c4ddc1d40537dadb29efa40d1d68cb852 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-11-07NSB Prox LW_AFTR TestDanielMartinBuckley1-0/+115
JIRA: YARDSTICK-802 Addition of PROX LW_AFTR basked on PROX/DATS v037 test_104_lw_aftr.py - This support BM and Openstack Heat - This supports 4 Ports ONLY - Grafana Dashboards included - Code Coverage / Unit testing Change-Id: If2170ab458bf687256d5f1a1e840a3b9d2788ef7 Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-11-02test_sample_vnf: mock timeRoss Brattain1-1/+2
Change-Id: Id8aa734fee431d90cbdc1e0eb2173784ada822fe Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-31NSB: remove validate_cpu_cfg and all app cpu methodsRoss Brattain1-106/+0
We don't really know what core we are going to use for the VNF before we generate the MultiPortConfig, so these methods are incorrect. We may need some more advanced method to validate the vCPU topology, but that will probably happen in the MultiPortConfig Change-Id: Ifee7ae4589ce0fce67771fb8d8b8dce0a0f06409 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>