Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch removes the global mocking applied on "os.path".
Change-Id: Ia18d2c90195c5408a1852792bdf05b6f0c1ad21f
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
|
|
|
|
JIRA: YARDSTICK-1035
Do not hardcode NIC/interface speed in PROX test. Test assumes
NIC used is 10Gbps. This is incorrect. It could support 1Gbps,
10Gbps, 25Gbps, 40Gbps or something else.
This is used to calculate pps (Packets Per Second)
In Baremetal the NIC speed could be extracted. however when
run on a virtual machine this is not possible.
Solution:
Add in options section of test file.
eg.
Options:
interface_speed_gbps: 10
Where 10 refers to a 10Gbps. In a setup where multiple interfaces
are used. This will refer to the speed of the slowest connection.
Change-Id: I89ab16479a2cdd1d79e52cbcc5a972762c60d057
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
The amount of hugepages claimed for a Sample VNF is always 16GB. This
value is excesive for most of the Sample VNF applications (except for vPE).
Making this parameter configurable we allow to spawn smaller VMs by using
less hugepages (in case of StandAlone and OpenStack deployments).
Because this parameter depends on the Scenario and the type of VNF executed,
the parameter is located in:
scenarios: {options: hugepages_gb} # number of GB of hugepages claimed
PENDING: document this new parameter. A new userguide section should be
created to document all "scenario" sections and parameters.
JIRA: YARDSTICK-1061
Change-Id: I6f082e105289bd01781be18f2fecbe0ba2fdfdee
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
JIRA: YARDSTICK-966
Change-Id: Ic98711fa1a31d27fcb60bd96b1b3e22b5cca86b3
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
|
|
In [1], VNF interfaces in TG PROX are sorted by "vpci" address, before
this value is populated in "vnfd_helper". "vpci_if_name_ascending" is
only used in TP ProxPofile [2] to generate the stats.
This patch delays this sorting process until the stats generation.
[1]https://github.com/opnfv/yardstick/blob/a74ad5a1ec1a73389c5983440b2031b0bc72cea1/yardstick/network_services/vnf_generic/vnf/tg_prox.py#L62-L64
[2]https://github.com/opnfv/yardstick/blob/a74ad5a1ec1a73389c5983440b2031b0bc72cea1/yardstick/network_services/traffic_profile/prox_profile.py#L33
JIRA: YARDSTICK-1044
Change-Id: I988dc48f9a82baa1c64f728d9e6d54f2f4bae010
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
Removes the unnecessary main() functions from tests.
Also removes shebang (#!) where it appears at the top of files.
JIRA: YARDSTICK-861
Change-Id: I79180d1eb9c5bce640142dd62ce28c7437c1b210
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
Change-Id: Ie956d8064a8fbcbd3d56c5a79c4c613d35184af4
JIRA: YARDSTICK-942
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
* tests/unit/network_services/helpers/test_samplevnf_helper.py
* tests/unit/network_services/traffic_profile/test_rfc2544.py
* yardstick/tests/unit/common/test_ansible_common.py
JIRA: YARDSTICK-942
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
Change-Id: Ib3c71db5f5774d2bfb3a9cbd260b838eb5501448
|
|
If no devices are present we can't detect MAC address so
we can't match Heat ports to interfaces.
If only the driver is missing we can try to probe the driver using
lspci. We can use lspci to ask the kernel what driver it should use
for the PCI device.
If we can't probe at all because the device is already bound, we can
use dpkd-devind to find all the PCI address we care about and create a
map with PCI device and real kernel driver.
Then we can dpdk force rebind to the kernel driver.
Once we have rebound to the kernel driver we can detect
MAC address and all the other attributes that are required.
Fix VnfSshHelper to allow override of wait timeout
And a bunch of other refactors that got swept up in this
JIRA: YARDSTICK-835
Change-Id: I14cb657ed289a77941d048345d06ced5b5d5da52
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Added topology and traffic profile templates
Added support for using JinJa2 templates in topology definition
Added support for static pipeline configs for SampleVNFs
JIRA: YARDSTICK-1043
Change-Id: Iab99fd5b5ad69ca32ee70b9fe47779387ad27e7f
Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
|
|
In order to render configurable traffic profiles in NSB test cases,
a new variable is introduced: "extra_arg". The content of
this variable is added to the VNFD render data, under a key called
"extra_args".
This will allow the user to define Jinja templates for traffic profiles.
E.g.:
$ cat test_case_definition.yml
scenarios:
- type: NSPerf
traffic_profile: traffic_profile.yml
extra_args:
vports: 10
$ cat traffic_profile.yml
{% set vports = get(extra_args, 'vports', '0') or 4 %}
{% for vport in range(vports|int) %}
uplink_{{vport}}:
data...
{% endfor %}
JIRA: YARDSTICK-946
Change-Id: Ib3c1f2d89efa012772edf2156e97d5f4742a6b80
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
"traffic_profile" modules should be imported only once. Every time
TrafficProfile.get is called, the modules under
"yardstick.network_services.traffic_profiles" are loaded [1]. Instead
of this, the modules should be registered only once the first time
"yardstick.network_services.traffic_profiles.base" is loaded. This
will reduce the execution time and will avoid unnecessary calls.
[1] https://github.com/opnfv/yardstick/blob/d2c7cc4e9768ed003257a95c92cdb278d516761b/yardstick/network_services/traffic_profile/base.py#L36-L37
JIRA: YARDSTICK-951
Change-Id: Ia3565378ba3a1377fcb0aea8bda50ef8189414fd
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
Make it more clear that traffic_profile is not a generic class.
Eventually we can refactor a more generic traffic profile.
Change-Id: I1bf44a8cafcdeb8d74efb9e85a34f6d7b526d036
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
|
|
|
|
JIRA: YARDSTICK-1036
This stores a number of extra counters in influxdb for Prox test cases.
It also stores existing counters with a "succcess_" tag.
Previously throughput where stored without success or failure indication.
Also "Result_" counters are also stored.
These can now be used by Grafana to graph output.
Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
IP address format introduced in [1] should be unicode instead of string.
"ipaddress.IPv4Address(min_value)" doesn't parse correctly the input
parameter unless the parameter is in unicode format; this is valid both
for Python version 2 and 3.
Execution error if the parameter is a string:
>>> int(ipaddress.IPv4Address('10.0.3.2'))
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/local/lib/python2.7/dist-packages/ipaddress.py",
line 1391, in __init__
self._check_packed_address(address, 4)
File "/usr/local/lib/python2.7/dist-packages/ipaddress.py",
line 554, in _check_packed_address
expected_len, self._version))
ipaddress.AddressValueError: '10.0.3.2' (len 8 != 4) is not permitted
as an IPv4 address. Did you pass in a bytes (str in Python 2) instead
of a unic
[1]https://github.com/opnfv/yardstick/blob/e5775e7efbc55f116b4d4ac11ff87b8d8553247e/yardstick/network_services/traffic_profile/traffic_profile.py#L87-L88
JIRA: YARDSTICK-996
Change-Id: Ic727a79044834b181c99789f0f5efc21c68f0ff2
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
|
|
also fix pylint unittest warnings
JIRA: YARDSTICK-1014
Change-Id: I4ff9769fdca89c6fc1fb9ca62e9f8ea6b174681e
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Change-Id: Ie1da572e2ac00e380b25f8e22f5aa9059dcb5238
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Change-Id: Ieb58167d8b20e0de32578b3df105a141507869d5
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
also fix unittests
Change-Id: Ie3026f5a0df8e690271afb71fe36ac531cbae2a0
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Both "uio" and "igb_uio" drivers are present in the VM image generated
using "./nsb_setup.sh" script. "igb_uio" driver is compiled along with
the DPDK library compilation.
Tool "nsb_setup.sh" provisioning and execution should be removed from
this function because there is not needed anymore.
In case "igb_uio" driver is not loaded, an exception should be raised.
JIRA: YARDSTICK-999
Change-Id: I89174f84ac36d8231587402c96751746cb18e290
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
|
|
http://dpdk.org/doc/guides/sample_app_ug/ip_pipeline.html#application-resources-present-in-the-configuration-file
LINK instances are created implicitly based on the PORT_MASK application startup
argument. LINK0 is the first port enabled in the PORT_MASK, port 1 is the next one,
etc. The LINK ID is different than the DPDK PMD-level NIC port ID, which is the actual
position in the bitmask mentioned above. For example, if bit 5 is the first bit set
in the bitmask, then LINK0 is having the PMD ID of 5. This mechanism creates a
contiguous LINK ID space and isolates the configuration file against changes in the
board PCIe slots where NICs are plugged in.
Change-Id: I6e449272cfcfb2b2a75c246f7f569e3f923da245
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
The goal of this function is to:
- Read the default hugepage size.
- Set 16GB of hugepages.
- Check if the status of the last action.
According to [1], the default hugepage size could be read in
"/proc/meminfo", always in kB. Then "/proc/sys/vm/nr_hugepages"
could be used to set the number of default hugepages.
[1] https://www.kernel.org/doc/Documentation/vm/hugetlbpage.txt
JIRA: YARDSTICK-997
Change-Id: I762d1b16294ba1c1c2feee56610819ac358c7410
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
In DPDK 16.07 [1], "dpdk_nic_bind" utility was renamed to "dpdk-devbind".
This patch removes all references to this previous naming to avoid
confusions.
[1] https://dpdk-guide.gitlab.io/dpdk-guide/setup/binding.html
JIRA: YARDSTICK-995
Change-Id: I827c4c11c9e9e519f33f21b80459e7d65e51545e
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
|
|
Change-Id: Id19df79b4d27aab1a83d8350ce6395e87c13472b
JIRA: YARDSTICK-903
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
unittest.assertEquals is deprecated[1], and has been replaced with
unittest.assertEqual.
[1] https://docs.python.org/2/library/unittest.html#deprecated-aliases
Change-Id: I9c6320e3a9ec5528036b529a9c32fc48b0bcfd62
JIRA: YARDSTICK-864
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
JIRA: YARDSTICK-903
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
Change-Id: Id7912b5ddee36e7366bcfa824379853efd0a89f1
|
|
* Update log message and rename method to make debugging easier
* Fix pep8 violations in touched files
JIRA: YARDSTICK-859
Change-Id: Id138d72cd8557ffacd5dcc81d06feeb484e13625
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
Tool provisioning in PROX setup environment helper is not needed [1]. The
tool (PROX traffic injector) is already provided during the VNF building:
./ansible/nsb_setup.yml -->
./ansible/build_yardstick_image.yml -->
./ansible/ubuntu_server_cloudimg_modify_samplevnfs.yml -->
./ansible/roles/install_samplevnf
[1]https://github.com/opnfv/yardstick/blob/master/yardstick/network_services/vnf_generic/vnf/prox_helpers.py#L641
JIRA: YARDSTICK-872
Change-Id: I0f925a7967a35a97901fbe5053793a791a7b1b01
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
GenericVNF class is now an abstract class. Only optional methods are
implemented. Mandatory methods:
- instantiate
- wait_for_instantiate
- terminate
- scale
- collect_kpi.
JIRA: YARDSTICK-866
Change-Id: Ia8766f9f98816e11894d1e72b0f3bd573d091d99
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
Moving variable setting before reading
Verified via TC:
yardstick/samples/vnf_samples/nsut/ping/tc_ping_heat_context.yaml
JIRA: YARDSTICK-899
Change-Id: Ia2feac1ed4e67dccd02446ba27afc9d40e87be35
Signed-off-by: Jiri Prokes <jirix.x.prokes@intel.com>
|
|
A generic throughput test case that can be used as a
stub code for a Linux-based VNF configured as an L3 forwarder.
Supported context:
* Standalone OVSDPDK and SRIOV
* Baremetal
Code changes:
* Allow pmd-cpu-mask and lcore mask for OVS DPDK
* router_vnf.py - configures interface IP addresses and static arp entries
using ip command
* NFVi KPIs
* Allow cputune tag for standalone context to be able to PIN on NUMA 1 cpus
SRIOV Test cases:
* RFC2544 Ethernet framesizes, 128K Flows
* 2,4 and 6 ports
* 2 and 3 vcpus per port
*
OVSDPDK Test cases:
* RFC2544 Ethernet framesizes, 128K Flows
* 2 and 4 ports
* 2 vcpus per port
* 2 PMD threads per port
TODO:
* Documentation
* Add 6 ports tests
References:
* router_vnf.py is based on sample_vnf.py
* tc_*.yaml files are based on acl/vfw test case files
Added unitests
Added get_stats to parse ip -s link
Change-Id: Id1b969d5420dfcab7c1e695acbd2cd1655747efe
Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com>
Signed-off-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Reviewed-by: Alain Jebara <alain.jebara@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Emma Foley <emma.l.foley@intel.com>
Reviewed-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
Reviewed-by: Ross Brattain <ross.b.brattain@intel.com>
Reviewed-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com>
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Fixed standalone.model.Libvirt SR-IOV XML interface modeling, acording
to [1]:
- All PCI attributes now are printed in hexadecimal format.
- The PCI address is now added in the correct section, 'interface'.
network_services.utils.PciAddress was refactored to accept both 'domain:
bus:slot:function' and 'bus:slot:function' format inputs. This class is
used as input in the previous class, Libvirt, to print in XML the PCI
address of a SR-IOV interface.
network_services.utils.PciAddress.parse_address is now deprecated. Instead
the class standard instantiation must be used:
libvirt_obj = utils.PciAddress(text_with_address)
A deprecation decorator is implemented along with this patch. This
decorator is used for the first time in the previously mentioned function.
This decorator stores every decorated function name and deprecation message
and raises a logging warning message the first time this function is used.
[1] https://goo.gl/so2Mrp
Change-Id: I22e95c488e27d6e2a8fdf6c1a07faab275fa6bba
Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com>
Reviewed-by: Alain Jebara <alain.jebara@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ross Brattain <ross.b.brattain@intel.com>
Reviewed-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
GenericTrafficGen class is now an abstract class. Only optional methods
are implemented.
- 'run_traffic' and 'terminate' are mandatory.
- 'listen_traffic', 'verify_traffic' and 'wait_for_instance' are
optional. By default these methods doesn't execute any action.
JIRA: YARDSTICK-853
Change-Id: I2befdaa337af79cc2364bdd7c66183c31c5ab69a
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
|
|
JIRA: YARDSTICK-848
The NSB PROX MPLS test uses Binsearch traffic
profile and the mpls traffic profile is a duplicate.
Change-Id: Ie2124cebf306fd6917b70ecd7c23ae12ef4850dc
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
when we create TRex config we sort based on PCI bus address
and create a logical port ordering.
We need to save this port ordering and re-use it everywhere.
redirect vnfd_helper.port_num() to resource_helper.port_num() to
use the logical mapping
Change-Id: Ibff628556d5e11e686e15716a66a3210758c4ff0
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
network_services.vnf_generic.vnf.prox_helpers.ProxSocketHelper.rx_stats"
|
|
|
|
|
|
* Remove the method which is unused and is marked as deprecated.
Change-Id: Ie64084fcd26985283c664445b173a757d3d908ab
JIRA: YARDSTICK-838
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
intel_pmu needs to download a config file based on the
CPU model. When generating VNF images we don't have
access to the actual vCPU that will be used, so we
can't predownload. This code was meant to be a fix
for that by downloading all the configs and then
selecting one that matched the vCPU.
However we have license issues with intel_pmu enven GPLv2 code,
so remove it for now.
Change-Id: I5257ff7c4ddc1d40537dadb29efa40d1d68cb852
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
JIRA: YARDSTICK-802
Addition of PROX LW_AFTR basked on PROX/DATS v037 test_104_lw_aftr.py
- This support BM and Openstack Heat
- This supports 4 Ports ONLY
- Grafana Dashboards included
- Code Coverage / Unit testing
Change-Id: If2170ab458bf687256d5f1a1e840a3b9d2788ef7
Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
Change-Id: Id8aa734fee431d90cbdc1e0eb2173784ada822fe
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|