aboutsummaryrefslogtreecommitdiffstats
path: root/tests/unit/network_services/nfvi
AgeCommit message (Collapse)AuthorFilesLines
2017-10-27resource: remove cores argsRoss Brattain1-1/+1
We used to try to probe all the cores that the VNF was using and only dump CPU stats for those cores. We can't really detect those core accurately and we would rather dump all the core information and let influxdb and grafana filter the information. We do end up with excessive KPI output, especially on systems with 88 cores, but this is manageable. The core logic was partially removed, this finishes the removal. Change-Id: I5cbb694fd982519e2df54db49a21ed5948e13537 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-12collectd: set intel_pmu events path and OVS socket pathRoss Brattain1-5/+8
switch from hardcoded path to dynamic path based on bin_path also enable proxy for install_collectd add barometer settings for virt and ovs_stats Change-Id: Id138aef548332a3e3fcb3963b746e7c9f10c0948 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03NSB PROX test hang fixesRoss Brattain1-11/+25
The PROX tests were hanging in the duration runner. These are fixes for various errors: raise error in collect_kpi if VNF is down move prox dpdk_rebind after collectd stop fix dpdk nicbind rebind to group by drivers prox: raise error in collect_kpi if the VNF is down prox: add VNF_TYPE for consistency sample_vnf: debug and fix kill_vnf pkill is not matching some executable names, add some debug process dumps and try switching back to killall until we can find the issue sample_vnf: add default timeout, so we can override default 3600 SSH timeout collect_kpi is the point at which we check the VNFs and TGs for failures or exits queues are the problem make sure we aren't silently blocking on non-empty queues by canceling join thread in subprocess fixup duration runner to close queues and other attempt to stop duration runner from hanging VnfdHelper: memoize port_num resource: fail if ssh can't connect at the end of 3600 second test our ssh connection is dead, so we can't actually stop collectd unless we reconnect fix stop() logic to ignore ssh errors Change-Id: I6c8e682a80cb9d00362e2fef4a46df080f304e55 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-02add collectd resource node capabilityRoss Brattain1-1/+1
allow manually adding collectd nodes using Node context. if a node is present with a collectd config dict then we can create a ResourceProfile object for it and connect to collectd. example nodes: - name: compute_0 role: Compute ip: 1.1.1.1 user: root password: r00t collectd: interval: 5 plugins: ovs_stats: {} Change-Id: Ie0c00fdb58373206071daa1fb13faf175c4313e0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-27collectd: write config file from Jinja2 templateRoss Brattain1-131/+32
We have the collectd.conf inside the python package so instead of copying it from various places, write the template directly to the remote system. collectd: read collect.conf template with pkgresources read the collectd.conf file as a string directly and upload without creating temp file use Jinja2 template, disable failing plugins use proper Jinja2 template, disable the plugins that were failing to load and blocking startup add support for per-testcase collectd.conf config using YAML add support for custom interval, default is 25 seconds Change-Id: Id904f7b7c9f41a9dd7adf5dfa06c064d65c25d2d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-14NSB: fix port topologyMartin Banszel1-2/+2
Add a new PortPair class to resolve the topology into list of public and private ports. Before we were calculating public/private in multiple locations and using different conventions. In addition for all the DPDK test we need to use the DPDK port number and no rely on interface ordering or interface naming conventions. We used to use xe0 -> 0, xe1 -> 1, etc. This is not the DPDK port number. Use the new dpdknicbind_helper class to parse the output of dpdk-devbind.py to find the actual DPDK port number at runtime. We then use this DPDK port number to correctly calculate the port_mask_hex. The port mask maps the DPDK port num (PMD ID) to the LINK ID used in the pipeline config We also need to make sure we only use the interfaces matched to the topology and not use all the interfaces, because in some cases we will have unused interfaces. In particular TRex always requires an even number of interfaces, so for single port TRex tests we have to create the second port and not use it. Thus we had to modify the traffic generator stats code to only dump stats for used ports and no unused ports. Ixia was using interface ordering to map to Ixia ports, instead we use the dpdk_port_num which must be hardcoded for Ixia. Renamed traffic_profile.execute to traffic_profile.execute_traffic so we can trace the code easier. We pass the port used by the traffic profile to generate_samples so we don't get stats for unused ports. Fixed up vPE config creation and bring up issues. Fixed up CGNAPT and UDP_Replay to work correctly. Tested with 4-port scale-out Change-Id: I2e4f328bff2904108081e92a4bf712333fa73869 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-04Adding intel_pmu tools plugin for collectdDeepak S1-0/+5
Change-Id: I81ff3d43d209e98188855c8b2eb302835bb5d417 Signed-off-by: Neha Vadnere <neha.r.vadnere@intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-19Fix parsing of the results from collectd pluginsDeepak S1-2/+2
Change-Id: I3f7b9ca17164564b11517116e7e73b47f42243b9 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-08-08CollectdDeepak S1-11/+209
Change-Id: I15e4ac38b347a08350b71c68469e2793eeed92ab Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-04-11standardize ssh authRoss Brattain1-3/+3
we need to be following defautl paramiko rules, first use pkey, then key_filenames (autodetecting ~/.ssh/ keys), then password We have too much boilerplate redudant code everywhere, we need to standardize on a factory function that takes a node dict. Using Python3 ChainMap we can layer overrides and defaults. VNF descriptors have to default key_filename, password to Python None. The only way to do this is to omit key values if the variable is not defined, this way the dict will not have the value and it will default to Python None Add python2 chainmap backport Updated unittest mocking to use ssh.SSH.from_node Change-Id: I80b0cb606e593b33e317c9e5e8ed0b74da591514 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-02-06nfvi: disable failing AMQP unittestRoss Brattain2-27/+11
Failures: test_connect (network_services.nfvi.test_collectd.TestAmqpConsumer) ... ERROR:pika.adapters.base_connection:Connection to 1.1.1.1:5672 failed: timeout WARNING:pika.connection:Could not connect, 0 attempts left ERROR:pika.callback:Calling <bound method SelectConnection._on_connection_error of <pika.adapters.select_connection.SelectConnection object at 0x7fe7e2333710>> for "0:_on_connection_error" failed Traceback (most recent call last): File "/home/jenkins/opnfv/slave_root/workspace/yardstick-verify-master/.tox/py27/local/lib/python2.7/site-packages/pika/callback.py", line 236, in process callback(*args, **keywords) File "/home/jenkins/opnfv/slave_root/workspace/yardstick-verify-master/.tox/py27/local/lib/python2.7/site-packages/pika/connection.py", line 1265, in _on_connection_error self.params.connection_attempts) AMQPConnectionError: Connection to 1.1.1.1:5672 failed: timeout ok Firstly, 1.1.1.1 is not an approriate fake address, use 127.0.0.1 so we don't try to connect to anything external But 127.0.0.1 won't work anyway, so disable test_connect replace 152.16.0.0 with 172.16.0.0 Remove network_services.nfvi.test_resource.TestResourceProfile since it also fails due to same error Remove test_amqp_collect_nfvi_kpi_exception Change-Id: I00bb1729658e18b4651129661ad9dd9c0dedcf37 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-01-19Add infrastructure to add the NFVi KPI collectionsDeepak S3-0/+331
This patches added common function to collect NFVi KPIs for given usecases - Core KPIs like memory/LLC/IPC etc - OVS stats - memory stats etc. JIRA: YARDSTICK-488 Change-Id: Iab41146392efc47b7313b1846a67728a44d0f1d6 Signed-off-by: Deepak S <deepak.s@linux.intel.com>