aboutsummaryrefslogtreecommitdiffstats
path: root/tests/unit/benchmark
AgeCommit message (Collapse)AuthorFilesLines
2017-10-06heat: add port name as portRoss Brattain1-0/+1
Change-Id: Ibd159359c6f57d573a909d6841c121c15bf692c1 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-06Add intermediate variables for attacker,monitor,result_checkerqiujuan1-2/+2
JIRA: YARDSTICK-790 Change-Id: I6bb36c98b8673155d3142fc54cfb39315d5ce613 Signed-off-by: qiujuan <juan_qiu@tongji.edu.cn>
2017-10-04NSB PROX test hang fixesRoss Brattain1-2/+50
The PROX tests were hanging in the duration runner. These are fixes for various errors: raise error in collect_kpi if VNF is down move prox dpdk_rebind after collectd stop fix dpdk nicbind rebind to group by drivers prox: raise error in collect_kpi if the VNF is down prox: add VNF_TYPE for consistency sample_vnf: debug and fix kill_vnf pkill is not matching some executable names, add some debug process dumps and try switching back to killall until we can find the issue sample_vnf: add default timeout, so we can override default 3600 SSH timeout collect_kpi is the point at which we check the VNFs and TGs for failures or exits queues are the problem make sure we aren't silently blocking on non-empty queues by canceling join thread in subprocess fixup duration runner to close queues and other attempt to stop duration runner from hanging VnfdHelper: memoize port_num resource: fail if ssh can't connect at the end of 3600 second test our ssh connection is dead, so we can't actually stop collectd unless we reconnect fix stop() logic to ignore ssh errors Change-Id: I6c8e682a80cb9d00362e2fef4a46df080f304e55 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-03drain runner queue and undo cancel_join_threadRoss Brattain1-2/+41
Sometimes the runners can hang. Initially debugging lead to the queue join thread, so I thought we could cancel all the join threads and everything would be okay. But it turns out canceling the queue join threads can lead to corruption of the queues, so when we go to drain the queues the task hangs. But it also turns out that we were not properly draining the queues in the task process. We were waiting for all the runners to exit, then draining the queues. This is bad and will cause the queues to fill up and hang and/or drop data or corrupt the queues. The proper fix seems to be to draining the queues in a loop before calling join with a timeout. Also modified the queue drain loops to no block on queue.get() Revert "cancel all queue join threads" This reverts commit 75c0e3a54b8f6e8fd77c7d9d95decab830159929. Revert "duration runner: add teardown and cancel all queue join threads" This reverts commit 7eb6abb6931b24e085b139cc3500f4497cdde57d. Change-Id: Ic4f8e814cf23615621c1250535967716b425ac18 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-02code inspection fixes: test_pktgenRoss Brattain1-7/+7
Change-Id: I05cb069984b7674924cfcb1ed023048c0aa0c444 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-02Enabling multi_VM & multi port launch in standalone contextDeepak S15-1662/+1129
new context names: - SRIOV - StandaloneSriov - OvsDpdk - StandaloneOvsDpdk - Seperate helper, libvirt, server info class - Allow multi-port and multi-VM support. Change-Id: I3c65e4535082fa0e2f4c6ee11c3bca9ccfdc01b8 Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
2017-09-30vnf_generic: Fix str object has no attribute itemsDino Madarang1-0/+6
When an IP range is specified in src_ip/dst_ip like: src_ip: - '152.16.100.180-152.16.100.181' yardstick would return str object has no attribute items error. This change will return the IP range as is if type is str. Change-Id: I3b097777f0d85b0600207157bebba18987ea2275 Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-25Add service in kubernetes contextchenjiankun1-6/+59
JIRA: YARDSTICK-803 Currently kubernetes test case can only run in master node. We need to support it run in jump server. So I add service and use nodePort type. Then we can login the pod using nodePort. Change-Id: Ia7900d263f1c5323f132435addec27ad10547ef9 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-09-25Heat: use pkey from string instead of key_filenameRoss Brattain1-11/+14
Instead of using a key_filename for Heat, we can read the key as a string directly using pkg_resources.resource_string() This will enable us to save Heat stacks as pod.yaml, because we can embedded the key into the pod.yaml directly. Change-Id: I16baaba17dab845ee0846f97678733bae33cb463 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-19NSB: count from 0, vnf_0, tg_9, private->uplink, public->downlinkRoss Brattain4-34/+34
Also rename private to uplink, public to downlink for scale-out template we need to count from 0 so we can use range() without +1/-1 errors vnf_0, vnf_1 tg_0, tg_1 also fix Ixia defaults Change-Id: I6aecfbb95f99af20f012a9df19c19be77d1b5b77 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-18NSB: fix port topologyMartin Banszel2-9/+29
Add a new PortPair class to resolve the topology into list of public and private ports. Before we were calculating public/private in multiple locations and using different conventions. In addition for all the DPDK test we need to use the DPDK port number and no rely on interface ordering or interface naming conventions. We used to use xe0 -> 0, xe1 -> 1, etc. This is not the DPDK port number. Use the new dpdknicbind_helper class to parse the output of dpdk-devbind.py to find the actual DPDK port number at runtime. We then use this DPDK port number to correctly calculate the port_mask_hex. The port mask maps the DPDK port num (PMD ID) to the LINK ID used in the pipeline config We also need to make sure we only use the interfaces matched to the topology and not use all the interfaces, because in some cases we will have unused interfaces. In particular TRex always requires an even number of interfaces, so for single port TRex tests we have to create the second port and not use it. Thus we had to modify the traffic generator stats code to only dump stats for used ports and no unused ports. Ixia was using interface ordering to map to Ixia ports, instead we use the dpdk_port_num which must be hardcoded for Ixia. Renamed traffic_profile.execute to traffic_profile.execute_traffic so we can trace the code easier. We pass the port used by the traffic profile to generate_samples so we don't get stats for unused ports. Fixed up vPE config creation and bring up issues. Fixed up CGNAPT and UDP_Replay to work correctly. Tested with 4-port scale-out Change-Id: I2e4f328bff2904108081e92a4bf712333fa73869 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-09-13Heat: support non-mesh network toplogyRoss Brattain2-61/+29
Previsouly we added all servers to every network in Heat in a full mesh. To more closely replicate test topology and to limit then number of ports we need to all each server to specify which ports should be connected to each network. This should also allow for some kind of multiport setup. Add optional network_ports dict to each server with network to port_list mapping match inteface based on port name or vld_id replace vld_id matching with network name matching, since network_name == vld_id Change-Id: I5de46b8f673949e3c17d8df6fa96f055c43886ce Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-07Merge "Bugfix: ha test case criteria pass when sla not pass"Kubi1-8/+37
2017-09-06Merge "test_kubernetes: mock file operations in test_ssh_key"Ross Brattain1-1/+6
2017-09-06Merge "test_vsperf_dpdk: mock time to speedup unitests"Ross Brattain1-11/+14
2017-09-03test_create_keypair: fix op_utils mock and mock paramikoRoss Brattain1-5/+6
Change-Id: I5c039c0d4f4ba651209c7d5ca4e748f9151b5630 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-03test_kubernetes: mock file operations in test_ssh_keyRoss Brattain1-1/+6
tests take too long and we should not be createing/deleting files during unittests, filesystems operations introduce too many external issues Change-Id: I989c9d0a84187becdf63497c0c1ac6e10c5eac70 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-09-03test_vsperf_dpdk: mock time to speedup unitestsRoss Brattain1-11/+14
If you put time.sleep(1) all over your code you need to mock time.sleep() in your unittests lest the unittests take forever. Change-Id: I9ebbf9e21c98e8c46bab727bbb22f33045db4361 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-31Adding support for updating the count/packetsize for given testcaseDeepak S1-1/+1
Change-Id: I3ec1a6d3710d44df5ddac6bd8967d28ad58e8d33 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-09-01Bugfix: ha test case criteria pass when sla not passrexlee87761-8/+37
ha test cases didn't store moniter info and report fail when sla didn't pass Change-Id: I0e5637e37a66e1bf03b47fe09d17e0a1acfa11c1 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2017-08-30_get_ip_flow_range: fix bug with single IP rangesRoss Brattain1-3/+3
If we have a /32 or for some reason find a range of IPs to use, we can default to the single IP specified on the interface. Change-Id: Ieaa1d57b04e1d57e8cef344d5a53bbca05e7887f Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-29Merge "DRAFT: model: remove vld_id not needed"Ross Brattain1-3/+0
2017-08-29Merge "Add common openstack opertation scenarios: router & port"Ross Brattain5-0/+179
2017-08-28DRAFT: model: remove vld_id not neededRoss Brattain1-3/+0
it seems vld_id is not needed now that we add it in _resolve_topology. Remove it from the model and Heat context first and see what happens Needs testing Change-Id: I30d13c80bd90246ee3be67a2bd3439db45e20bcd Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-26Merge "Test case: Fio volume benchmark testcase using job file"Jing Lu1-0/+14
2017-08-26Raise Exception if HA test case failedJingLu51-0/+1
Change-Id: Ia3677724075c1c1408f50bbfcebd3cbcde251d66 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-08-25Add common openstack opertation scenarios: router & portJingLu55-0/+179
JIRA: YARDSTICK-781 This patch adds some common openstack opertation scenarios Change-Id: Id436a201aa04f8f6b98576e8fbf599ca3654827c Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-08-24Merge "add ppm into result of pktgen to make result clear"Ross Brattain1-5/+5
2017-08-24Standardized TRex client library pathMaciej Skrocki2-120/+3
- path should be defined via TREX_CLIENT_LIB environmental variable e.g. TREX_CLIENT_LIB=/opt/trex_client/stl - refactored unit tests Change-Id: I18767e48daf774432c010f1b88d18a4f0ee4e156 Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-24Merge "Add common openstack opertation scenarios: volume & floating ip"Jing Lu4-0/+143
2017-08-23Merge "Re-define the framesize and flow dynamic define in testcase"Ross Brattain1-4/+30
2017-08-23Add common openstack opertation scenarios: volume & floating ipJingLu54-0/+143
JIRA: YARDSTICK-781 This patch adds some common openstack opertation scenarios Change-Id: I1300a61b389202242f112b6d280ab47746379546 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-08-22Test case: Fio volume benchmark testcase using job fileJingLu51-0/+14
JIRA: YARDSTICK-791 In some use cases, Fio is used with a job file instead of parameters. This work is about adding support for the job file and add a new test case for volume testing. Change-Id: I312d61bf6e7d95f23eedb0b6487f6103b7d76355 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-08-22Merge "Add common openstack opertation scenarios: subnet & port"Jing Lu5-0/+194
2017-08-22Merge "test_vsperf_dpdk: remove unused and incorrect mock open"Ross Brattain1-2/+0
2017-08-21Re-define the framesize and flow dynamic define in testcaseDeepak S1-4/+30
This patch adds the framesize and flow into test option instead of adding a seperate file to avoid the multiple file update incase of ip change. Change-Id: Ic473c73773ad36422ecc02618b8c646a5336b70a Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-08-21Refactor to make file sys more like class inheritanceEdward MacGillivray10-18/+23
Change-Id: I5471d2e894ca78407a57f3ba01202264c69ad174 Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
2017-08-21add ppm into result of pktgen to make result clearrexlee87761-5/+5
Change-Id: I6649960dc9fbc61c22c9b7434805fc335634960b Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2017-08-20test_vsperf_dpdk: remove unused and incorrect mock openRoss Brattain1-2/+0
need to use create=True with mock open anyway Change-Id: I3a35688cf8c367434db9d0cf057030d49deddd0d Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-21Add common openstack opertation scenarios: subnet & portJingLu55-0/+194
JIRA: YARDSTICK-781 This patch adds some common openstack opertation scenarios Change-Id: Ie59f0d5ae0842f8347824c961436b889a95b1a72 Signed-off-by: JingLu5 <lvjing5@huawei.com>
2017-08-21Merge "Add common openstack opertation scenarios: network"Jing Lu3-0/+102
2017-08-19Fix IxLoad traffic generator issue around running the traffic.Deepak S1-4/+4
Change-Id: Ic1f13c0d28c1a1b01bbf3c8a6a618a5b3ab5bbeb Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-17Merge "utils: create TASK_LOG_DIR if it doesn't exist"Ross Brattain1-1/+2
2017-08-15YAML fixesRoss Brattain1-3/+3
There are multiple issues wiht YAML loading. 1. Jinja2 renders None values as a string 'None'. This is not valid YAML we need to render None values to '~' or 'null' which is the native YAML None value. 2. Jinja2 renders dict and lists that contain unicode with u'foo' values. This is not value YAML syntax. Because we are serializing dict and lists into YAML, we need to encode them as valid YAML. We can override Jinja2 finalize to use yaml.dump to dump inline YAML. We use yaml.safe_dump(elem, default_flow_style=True).replace('\n', '') to generate valid single-line YAML dict and list values. But this problem highlights the general difficulties with templating and loading files. We could avoid this Python->Jinja2->YAML->Python issue by directly injecting the list or dict after the YAML is loaded. I'm not sure of the real utility of these templates. 3. On Python 2 YAML loader is rendering all strings as unicode. This does not work for Trex because Trex is broken and badly coded. Trex does type checking against str() which is different for Python 2 and Python 3. The default YAML loader will return native string types, str() or unicode() for Python 2 and Python 3 respectively. The bad Trex codes is in convert_val: https://github.com/cisco-system-traffic-generator/trex-core/blob/master/scripts/automation/trex_control_plane/stl/trex_stl_lib/trex_stl_packet_builder_scapy.py#L674 def convert_val (val): if is_integer(val): return val if type(val) == str: return ipv4_str_to_num (is_valid_ipv4(val)) raise CTRexPacketBuildException(-11,("init val invalid %s ") % val ); This code is doing type(val) == str. This is bad and broken. We can't fix Trex, so we have to render all strings as native str() types The bug here was that the Heat template loader template_format.py was overriding the global YAML loader to always return unicode. We don't want this global override. To fix this we have to use local subclasses of the yaml.SafeLoader class. But in order to dynamically subclass from CSafeLoader or SafeLoader we have to use the type() builtin to define a new class at runtime. Once we have new classes defined, we can safely isolate different YAML constructors and return unicode or not depending on the case. To be consistent we implement a new yaml_loader.py module to centralize all non-Heat template yaml loading to ensure correct uncode/str conversion Change-Id: Iebf9cf78fbda390977c390436b0869e7bbf503eb Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-15Integrate vsperf in Tgen modeJing Zhang1-0/+236
Problem: Running Vsperf in Tgen mode is supported but the integration is not complete at the code level i.e. not ready-to-use, and dpdk loopback is not supported inside the VM. Solution: (1) Completely automates VM image generation and supports 1G huge pages. (2) Adds a new test scenario VsperfDPDK for testpmd based loopback inside the VM. Update 1-2: Fixed "line too long" issues not reported by local run_tests.sh (why?) Update 3: Per comment change to use SSH.from_node() and add unit test cases Update 4: Add more unit test cases for coverage and ready the code for merge JIRA: YARDSTICK-661 Change-Id: Iea3014d4c83e1b0c079019a4ed27771d40a7eed8 Signed-off-by: Jing Zhang <jing.c.zhang@nokia.com>
2017-08-14PROX VNF and TGRoss Brattain2-0/+270
PROX was added to samplevnf project https://git.opnfv.org/samplevnf/tree/VNFs/DPPD-PROX JIRA: YARDSTICK-638 Change-Id: If9875b1130c6bed87deb8720b0d8b28ede9289d9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-13utils: create TASK_LOG_DIR if it doesn't existRoss Brattain1-1/+2
Change-Id: I10630599065e6c159b137bd4d6ee89353a1c411b Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-11Add Ansible executor class for node contextRoss Brattain1-4/+2
import the AnsibleCommon class to execute Ansible playbooks Update node context support to use AnsibleCommon needs unittests We must call ansible-playbook as an executable, so we must create temp files for inventory, and for the playbooks. AnsibleCommon has evolved to be quite flexible, it auto-generates the inventory from the context['nodes'] and generates groups from the node Role. We also support either a single playbook filename, or a list of filenames. If given a list we dynamically generate a playbook that includes the other playbooks. We support adding any number of extra_vars using a temp JSON file. Also designed to be extended by subclassing. Change-Id: I5bd0a2b4547feaadd70b7e2b8801f19371b99df0 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-11Add real time log view in GUIchenjiankun1-1/+9
JIRA: YARDSTICK-775 We have GUI now, but we can't see real time log in GUI view. So I add real time log view in GUI. Change-Id: Ie83f327ef0a94302afa6b3def764fec6ef5818d1 Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
2017-08-11Merge "Add common openstack opertation scenarios: image & volume"Jing Lu4-0/+152