aboutsummaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2015-12-08Add scenario for reading processor loadJo¶rgen Karlsson1-0/+31
This scenario reads processor and system load statistics and does not run any benchmark tests. The scenario is intended to be run in parallell with other scenarios in order to collect processor and system load statistics. System load is read from /proc/loadavg. Processor usage stats is read using the 'mpstat' utility if it has been installed on the host. If 'mpstat' is not installed on the host processor usage stats is read from /proc/stats. Change-Id: I7156e0c941100023571db750de7540786a4fedb8 JIRA: YARDSTICK-181 Signed-off-by: Jo¶rgen Karlsson <jorgen.w.karlsson@ericsson.com>
2015-11-13A initial HA test casewym_libra1-0/+29
1)stop an openstack service 2)then monitor the corresponding api and check the availability of it 3)recovery the openstack service JIRA: YARDSTICK-149 Change-Id: Id7b77d2f5c71844729c04f37442c8cfaa270ab12 Signed-off-by: wym_libra <yimin.wang@huawei.com>
2015-11-01Support NodeContext typeQiLiang1-0/+29
Initial NodeContext implementation to support BareMetal, Controller, Compute scenarios. Usage: 0) install yardstick 1) mkdir -p /etc/yardstick/nodes 2) cp <yardstick_repo>/etc/yardstick/nodes/pod.yaml.sample \ /etc/yardstick/nodes/pod.yaml 3) edit /etc/yardstick/nodes/pod.yaml (make show ip, username, ssh key are configured correctly) 4) yardstick -d task start \ <yardstick_repo>/samples/ping-node-context.yaml 5) cat /tmp/yardstick.out Design etherpad link: https://etherpad.opnfv.org/p/yardstick_framework JIRA: YARDSTICK-169 Change-Id: I3f6ade8243e68d88326f23ed213edb32c638ed32 Signed-off-by: QiLiang <liangqi1@huawei.com>
2015-10-28Extend lmbench scenario to measure memory bandwidthKristian Hunt1-1/+20
Lmbench scenario has now two scripts and will choose between them, based on whether the intention is to run memory latency or bandwidth tests. Added also unit test file for this scenario. JIRA: YARDSTICK-113 Change-Id: I2ba4dbef31f3cafbdb3c583ece5ed9512a906896 Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-10-20Heat context code refactorQiLiang1-0/+45
Heat context code refactor to cater for the evolution of the Yardstick framework. At test_case.yaml context segment add "type" to indicate the context type, see samples/ping-heat-context.yaml for an example. And the default context type is Heat, so the existing yaml file do not need to change. JIRA: YARDSTICK-168 Change-Id: Ida0ce12c17cd9b88d7acfb4c9eb1ac6986394b38 Signed-off-by: QiLiang <liangqi1@huawei.com>
2015-10-15Add Cyclictest scenario and sampleQiLiang1-0/+44
Support measuring operating system's high resolution by using Cyclictest. JIRA: YARDSTICK-122 Change-Id: I2e00ce117e263deaaf52cd2d663b845bd5b65432 Signed-off-by: QiLiang <liangqi1@huawei.com>
2015-10-15Support for netperfkubi1-0/+69
As agreed in the IRC meeting, use iperf for YARDSTICK-112; support for netperf shall also be included in the framework (Yardstick-121). bulk data test and req/rsp test are supportted by netperf JIRA:YARDSTICK-121 Change-Id: I0e934dc067802c2792d751a19a187cd00ad8741b Signed-off-by: kubi <jean.gaoliang@huawei.com>
2015-10-14Merge "Fio scenario support sla"houjingwen1-0/+8
2015-10-13Add test suite functionality to task commandsKristian Hunt1-0/+18
This patch proposes a more permanent solution to replace the already existing one (YARDSTICK-106). A test suite is a .yaml file which consists of multiple task files which are meant to run as a one set. Each test case in the test suite has to specify the location of the test .yaml task file and can specify additional task arguments or a task arguments file. It is possible to specify the directory where the task files are located in the suite file. If it is left unspecified then it defaults to tests/opnfv/test_cases according to https://etherpad.opnfv.org/p/yardstick_folders A Command line argument --suite is added to the task command. This argument indicates that the intention is to run a test suite. JIRA: YARDSTICK-107 Change-Id: I69508b3b536dd592b6240a2a32dd5d665e0ac4b4 Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-10-13Fio scenario support slahoujingwen1-0/+8
JIRA: YARDSTICK-34 Change-Id: I782ba5845f8bd54a19bad078fe7be546400f7524 Signed-off-by: houjingwen <houjingwen@huawei.com>
2015-10-08Add testing packet delay variation between VMswym_libra1-0/+45
1)create test case("iperfs-jitter") for measuring packet delay variation 2)and modify "iperf3.py" to support it JIRA:YARDSTICK-131 Change-Id: Ic3416a713b69dc7687f6f85ecc0b79da8dfb7ed9 Signed-off-by: wym_libra <yimin.wang@huawei.com>
2015-09-25Add missing YAML document start boundariesKristian Hunt2-0/+2
This patch adds YAML document start boundaries (YAML spec 4.3.2) to samples, where the boundaries are missing. JIRA: - Change-Id: I6e67d4d73a449ad901392c017220a61f642716ac Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-09-24Fix bug in fio scenariohoujingwen1-39/+4
1) when duration>3600s in fio.yaml, ssh time out 2) sometimes the latency value in test result is null 3) update plot.py, fit for code update in fio.py 4) small bug in file.py (result output dump) Add --output-format=json in default args, so fio command can return json format data. JIRA: YARDSTICK-143 Change-Id: Ie02977b8c9f11986a1eed66896b84d18db3d2211 Signed-off-by: houjingwen <houjingwen@huawei.com>
2015-09-23Modify iperf sample to use yardstick testing imageKristian Hunt1-3/+3
This patch will make the iperf sample test case consistent with other test cases by using the yardstick-trusty-server image and making it possible to run this test case "out of the box" without requiring the modification of the sample file. Change-Id: I9b0da0d94f9c33f07bca79067a1eb5d615e2c15a JIRA: YARDSTICK-148 Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-09-06Support to config external network by shell envQiLiang15-16/+0
Example invocation: $ export EXTERNAL_NETWORK=net04_ext $ yardstick task start samples/ping.yaml The default external network is "net04_ext" external_net should not be possible set in yaml anymore. JIRA: YARDSTICK-54 Change-Id: I8c7b2850801f312c6878e9a363b06cdc8ade09bf Signed-off-by: QiLiang <liangqi1@huawei.com>
2015-09-01add support for Jinja2 in task filekubi2-0/+89
Add support in task file for the template syntax based on Jinja2. JIRA:YARDSTICK-101 Change-Id: I24be133ba590510612d97a1fce6c024e6edb57e4 Signed-off-by: kubi <jean.gaoliang@huawei.com>
2015-08-26FIO support variable iodepthhoujingwen1-4/+6
FIO storage performance varification support variable iodepth. JIRA: YARDSTICK-119 Change-Id: Ib6af55c5fbcaa7727a7541b13053b5e4ce8d3203 Signed-off-by: houjingwen <houjingwen@huawei.com>
2015-08-16Add iteration type for Runnerkubi1-0/+45
A Iteration runner is roughly the same as a Duration runner but runs for a configurable number of times/iterations instead of time. Basically just the termination condition is different. modify the unit and default value of iteration. rename iteration to iterations JIRA:YARDSTICK-49 Change-Id: I67f4014dc3cf923cd31cc2e990e2f7219bce40fe Signed-off-by: kubi <jean.gaoliang@huawei.com>
2015-08-13Add perf scenario and sampleKristian Hunt1-0/+43
Supports using perf software event counters. No hardware events are currently supported. It is possible to add some load to the system using the load parameter, otherwise the system will sleep while the measurements are collected. It is possible to configure SLA for any event measured. Change-Id: Ic413d940093aadd10dc32888ea416aa94316a6fe JIRA: YARDSTICK-51 Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-08-13Add lmbench scenario and sampleKristian Hunt1-0/+46
Supports measuring memory read latency using Lmbench. SLA can be verified for maximum latency time in nanoseconds compared against results from every measurement taken. Change-Id: Ia187e68eaa03341ba14b6e9eb986afb1d00dd0f6 JIRA: YARDSTICK-89 JIRA: YARDSTICK-92 Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-07-08Apply theme to server names in samplesraindirve7-30/+30
By request, changed the misleading 'client' and 'server' designations under context:servers in the sample files, to avoid misunderstandings and convey the message that their names are irrelevant. Uses the Greek pantheon as established in https://gerrit.opnfv.org/gerrit/#/c/946/ JIRA: - Change-Id: I28438340f7cbad679c2ffd4d147fbf0c7d2a379d Signed-off-by: raindirve <seanw@kth.se>
2015-07-08Add support for action hooks in runner configHans Feldt1-0/+49
pre-start and post-stop intention is to be used to gather information about the target system. single-shot and periodic-action intention is to perform actions on the infrastructure or cloud resources. For example server live migration or network interface down. Example of what can be added in the runner section: pre-start-action: command: "heat stack-show demo" periodic-action: interval: 10 command: "ifconfig vboxnet1" single-shot-action: after: 30 command: "nova show goofy.demo" post-stop-action: command: "nova list" pre-start and post-stop data are added into the output file. periodic and single-shot are not because that would interfere with the actual sampled data. Besides the intention is not to log statistics but do things with the infrastructure such as server live migration. TODO: add sections to the output file, something like pre, data & post JIRA: YARDSTICK-46 Change-Id: Ia059813fb74733f86368aea9c7a20e5afb71d228 Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
2015-07-06Add support for measuring storage performance use fiohoujingwen1-0/+74
A simple test case is added that will test writes to ephemeral storage. See samples/fio.yaml The Fio test type can also be used to test block storage, just modify the "filename" argument. JIRA: YARDSTICK-34 Change-Id: I1758d2999f8a5fdd44726e1dfc3e9769ea39dad6 Signed-off-by: houjingwen <houjingwen@huawei.com>
2015-07-03Add new sequence runnerKristian Hunt1-0/+44
The "sequence" runner will use an input value of the test for every run from a pre-defined list from the task file. Example runner section of the task file: type: Sequence interval: 1 scenario_option_name: packetsize sequence: - 100 - 150 - 200 JIRA: YARDSTICK-47 Change-Id: I5bde9b78cb356499c338ef3da26ac1783670887d Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-06-29Add Pktgen test step durationKristian Hunt1-0/+1
JIRA: YARDSTICK-48 Step duration for Pktgen can be configured for each step. Change-Id: Ida6e2f7d8a1c7d86fb2e65389b5b56d5958d3ad9 Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
2015-06-16Add support for single server ping testHans Feldt2-1/+36
A simple test case is added that will ping an external server on the internet. See samples/ping-ext-ip.yaml Change-Id: I15eb3cb6ab9e5c1cf280f2aade2bf4c9646d6cd4 JIRA: - Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
2015-06-16fix error in ping-serial yaml fileJo¶rgen Karlsson1-3/+3
Change-Id: Ibd98cdcc0ed56ab376d0c2f8f37d2b53e07f2d2b JIRA:- Signed-off-by: Jo¶rgen Karlsson <jorgen.w.karlsson@ericsson.com>
2015-06-15Add support for external HOT templateHans Feldt1-0/+44
An external HOT template is a separate yaml file in native Heat format HOT. The external template is referenced in the task file and used as template for a "context". Parameters required at template instantiation are also configured in the task file. See new sample file ping-hot.yaml Change-Id: Ie2b7ea96ea90b75ca4e08a29e2223ceeb1474724 JIRA: YARDSTICK-24 Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
2015-06-09Add support for multiple contexts(stacks)Hans Feldt1-0/+56
A list of contexts can be specified, cross referencing between contexts is supported and shown in the added sample file. TBD can placement group work between stacks? Change-Id: I26dbe94e52ba0be5e49f50fd70540a57de2204cb JIRA: YARDSTICK-31 Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
2015-06-09add pktgen scenario and sampleJörgen Karlsson1-3/+11
Supports measuring network throughput UDP. SLA can be verified for packet lost per million packets (ppm) Change-Id: Ie5972f189bbe58b39a2fae98630b2f117c176ae5 JIRA: YARDSTICK-5 Signed-off-by: Jorgen Karlsson <jorgen.w.karlsson@ericsson.com>
2015-06-04fix exit status at SLA assertionHans Feldt1-4/+10
tested by changing SLA action to assert and lower rtt, yardstick command should exit non zero Change-Id: I2dd091941fb4359add849f218cacc04f364142cd JIRA: YARDSTICK-25 Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
2015-05-28add iperf3 scenario and sampleHans Feldt1-0/+44
Supports measuring network throughput using TCP and UDP. SLA can be verified for bytes per second compared against the summary from iperf3. Change-Id: Ia387aac64932b9c01a64acdcba152fc46b32e382 JIRA: YARDSTICK-20 Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
2015-05-15add sample benchmark configuration filesHans Feldt5-0/+191
Change-Id: I21a9e2db57d12e16bc0358bfa6c34c4d1d6a4de0 JIRA: - Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>