aboutsummaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2018-10-04Fix NSB PROX L3FWD dropping packetsPatrice Buriez2-2/+14
JIRA: YARDSTICK-1037 Adjusted number of RX/TX descriptors to 2048, instead of default 256, in order to cope with interrupts during which no packets are received by the core, which results in the NIC dropping packets when it gets out of available descriptors to buffer them. Also adjusted mempool size, because more descriptors need more mbufs. This change aligns L3FWD test case with other test cases, for which number of RX/TX descriptors is already set to 2048. Change-Id: I11378c078398aca799295b619bb3d14dbee04ca3 Signed-off-by: Patrice Buriez <patrice.buriez@intel.com> (cherry picked from commit 3adfba6bac0133bdbaa3db62e16f662e11d84fb8)
2018-09-21Merge "[NSB] Adds support for running "black box" test cases for VNFs"Abhijit Sinha5-0/+232
2018-09-21[NSB] Adds support for running "black box" test cases for VNFsChornyi, TarasX5-0/+232
Using AgnosticVNF is now possible to create a "black box" testcase for any VNF. Example rfc2544 test with TRex as trafficgen samples/vnf_samples/nsut/agnostic/tc_baremetal_rfc2544_ipv4_64B_trex.yaml and Ixia samples/vnf_samples/nsut/agnostic/tc_baremetal_rfc2544_latency_ipv4_64B_ixia.yaml NOTE: Yardstick will not interact with VNF. No KPIs from VNF will be collected JIRA: YARDSTICK-1438 Change-Id: I408b3dcb90f29c7b41fcf8f883b5abfc4e9c3dbc Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
2018-09-20Merge changes from topics 'YARDSTICK-1354', 'YARDSTICK-1348', ↵Abhijit Sinha22-0/+3542
'YARDSTICK-1359', 'YARDSTICK-1356' * changes: Add vEPC service request test cases Add network initiated dedicated bearers creation Add UE initiated dedicated bearer creation test Add vEPC infrastructure for Landslide TG Add vEPC default bearers relocation test case Add vEPC default bearers create/delete test case Add Spirent Landslide traffic profile templates Update LSResourceHelper unittests Add Spirent Landslide TG API Added Landslide Resource Helper implementation Add TclClients for Spirent Landslide TG
2018-09-15Add vEPC service request test casesOrest Voznyy4-0/+1014
Add UE and network initiated testcase and related session profiles. JIRA: YARDSTICK-1429 Change-Id: I16d6c065cf346db31e235ac5add57509cfbc8009 Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-15Add network initiated dedicated bearers creationOrest Voznyy2-0/+845
Adding related pod file, session profile and testcase file. JIRA: YARDSTICK-1355 Change-Id: Ic97d59ef3a36ac05c6c369c36f917ae95d18d863 Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-15Add UE initiated dedicated bearer creation testOrest Voznyy2-0/+427
Adding session profile and test case file. JIRA: YARDSTICK-1353 Change-Id: Iaa98fd8cb3ed243f9ac157089de32fa23ec0e6b4 Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-15Add vEPC infrastructure for Landslide TGOrest Voznyy4-0/+176
1. Add yardstick topology and model for fully emulated environment. 2. Add support for black-box testing of real vEPC VNF vs Spirent Landslide traffic generator: - vEPC VNF pod file - topology and model files aware of vEPC VNF connection to Spirent Landslide TG - stub class for vEPC VNF, and related unit tests JIRA: YARDSTICK-1424 Change-Id: If7b6d19919679347c4360f4a0f2e420716e7fd2d Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-15Add vEPC default bearers relocation test caseOrest Voznyy2-0/+239
This test case runs on Spirent Landslide TG. All vEPC entities are emulated on Landslide test servers. Test case actions sequence: - create default bearers - start sending traffic - partial/full bearers relocation between two ENodeB's, Intra-MME - disconnect all bearers JIRA: YARDSTICK-1354 Change-Id: I95c7b0001ddb363402013d83ae8617b88b2a4bd9 Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-15Add vEPC default bearers create/delete test caseOrest Voznyy4-0/+411
This test case runs on Spirent Landslide TG. All vEPC entities are emulated on Landslide test server. Test run configuration is performed in following files: 1. test case file 2. pod file 3. session profile file (landslide_session_default_bearer*.yaml) The structure of these files represents configuration of different parts of test cases in this test session. The order of test cases should always match. Spirent Landslide test types involved: "SGW_Node", "SGW_Nodal". Test case actions sequence: - create default bearers (as per value of "Sessions" key) with specified rate (session profile key "StartRate") - send traffic flow(s) (pre-configured in traffic profile) for a number of seconds (specified in session profile key "duration") - remove N default bearers with specified rate (session profile key "DisconnectRate") Parameters with ALL_CAPS values are placeholders. User should replace them with their own condifuration. Session profile file placeholders do not need to be replaced as long as these parameters are overriden in other files (e.g. pod, test case). Test results are dispatched according to runner configuration options. For fully emulated test runs like this one, best suited runner is "Search" type. In case of testing against real EPC VNFs, user could prefer different runner type. JIRA: YARDSTICK-1348 Change-Id: I5caf4878fb212b38d4148a297c5dba03b8ab98a8 Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-15Add Spirent Landslide traffic profile templatesOrest Voznyy4-0/+430
These files are templates of Spirent Landslide data message flow (DMF) representing traffic profile of one or multiple traffic flows. Template files should not be edited directly. Instead, their parameters could be overriden in test case YAML file, in section "dmf". JIRA: YARDSTICK-1359 Change-Id: I4980a784a78ca870c18457227248e6e2ac0b8eda Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
2018-09-13Merge "Create a sample fio test case base on kubernetes"Rex Lee1-2/+28
2018-09-11Create a sample fio test case base on kubernetesrexlee87761-2/+28
make samples/fio.yaml to support both Openstack and K8s with context_type specified. It defaultly use Heat context, if for k8s, yardstick -d task start samples/fio.yaml --task-args '{"context_type": "Kubernetes"}' JIRA: YARDSTICK-1309 Change-Id: I2b0d61cf2f197ec8c60bda0ab4ff51594709f482 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-09-11Create a sample lmbench test case base on kubernetesrexlee87761-5/+28
make samples/lmbench.yaml to support both Openstack and K8s with context_type specified. It defaultly use Heat context, if for k8s, yardstick -d task start samples/lmbench.yaml --task-args '{"context_type": "Kubernetes"}' JIRA: YARDSTICK-1310 Change-Id: Ifa542e830fb5ab7823bd4f994ab5d7a8e8a5b415 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-09-04Merge "NSB NFVi PROX Missing VNF Statistics for CPU Utilization"Abhijit Sinha37-0/+149
2018-09-04NSB NFVi PROX Missing VNF Statistics for CPU UtilizationDanielMartinBuckley37-0/+149
JIRA: YARDSTICK-1404 The test scripts require an extra argument to support collectd. Also the CPU utilization is a different variable name structure in the JSON file. Change-Id: I127b7e86c0f93f7743331a2d71eb81d690e42471 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-08-30Merge "Add source and destination seed value in IXIA RFC2544"Rodolfo Alonso Hernandez3-12/+24
2018-08-27Merge "Change tc_trex files to execute standalone tests"Rodolfo Alonso Hernandez9-53/+53
2018-08-27Add source and destination seed value in IXIA RFC2544Rodolfo Alonso Hernandez3-12/+24
Add source and destination seed value in IXIA RFC2544 traffic profile. The default value for both parameters is 1. JIRA: YARDSTICK-1401 Change-Id: I3351194c8be9ac42cbf5655996d50b9b69884c72 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-08-27ping bottlenecks failed when security group rule do not support ipv6 - dovetailrexlee87761-0/+12
JIRA: YARDSTICK-1380 Change-Id: I2163eeb9ab17e4f0216ddaed688e78acdf51a1ff Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-08-27Merge "Make security group configurable - dovetail"Jing Lu1-0/+74
2018-08-21Merge "Make TRex latency statistics optional"Rodolfo Alonso Hernandez8-0/+8
2018-08-21Merge "NSB NFVi PROX BNG and vPE losing many packets"Abhijit Sinha9-10/+109
2018-08-20Make TRex latency statistics optionalRodolfo Alonso Hernandez8-0/+8
Because of performance issues in TRex due to the extra power needed to retrieve the latency statistics, this parameter will be optional and disabled by default. JIRA: YARDSTICK-1388 Change-Id: I07c0ec7bef86fd438d078cbd6748b98bc8cc0b37 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-08-20Make security group configurable - dovetailrexlee87761-0/+74
Make sercurity group can be configured via the context. The format would be: context: name: demo image: yardstick-image flavor: yardstick-flavor user: ubuntu security_group: rules: - remote_ip_prefix: "0.0.0.0/0" protocol: "tcp" port_range_min: 1 port_range_max: 65535 - remote_ip_prefix: "0.0.0.0/0" protocol: "udp" port_range_min: 1 port_range_max: 65535 - remote_ip_prefix: "0.0.0.0/0" protocol: "icmp" JIRA: YARDSTICK-1360 Change-Id: I00c45767ee2d70b790590e824599d5a4c274bced Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-08-14Change tc_trex files to execute standalone testsStepan Andrushko9-53/+53
Changes made in test cases for trex TG files to be able to run tests for standalone setup (OVS-DPDK/SRIOV). - tg__0: trafficgen_1 Changes to improve templates for tc_trex: - flavor: images: changed to default name: yardstick-nsb-image.img - default path for files under contexts section - RAM size JIRA: YARDSTICK-1368 Change-Id: Ida85de219acd566840de1a94975b8050c7f59b9b Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
2018-08-03IXIA: Add IP random range `seed` configuration optionMyron Sosyak3-0/+12
Added IP random range `seed` configuration option into IXIA traffic profile. JIRA: YARDSTICK-1364 Change-Id: Ic050b6cc48ea75ac6d0470bf7ec1b188649811e1 Signed-off-by: Sosyak, Myronx <myronx.sosyak@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-08-02NSB NFVi PROX BNG and vPE losing many packetsDanielMartinBuckley9-10/+109
JIRA: YARDSTICK-1101 The traffic generated by the generator in bng-4 result in non-symmetrical use of the cores on the SUT, as a whole range of IP addresses is skipped. Update cpe0 and cpe1 in gen files. In addition, for the routing table (ipv4.lua) for the BNG should be slighly different: while the BNG is a 4 ports test, only 2 of the ports are used as outgoing routing ports (the inet ports). Hence, the routing table should only use the mac of those two ports. The bad configuration (using 4 ports) result in an issue when BNG SUT and GEN are connected through a switch, packets are sent by the BNG SUT through the INET interfaces, but sometimes with the MAC of the CPE interface... Hence, packets are received on the wrong interface on the Gen site (resulting in some interfaces, the CPE ones, being overloaded) Created ipv4_bng.lua and remove mac 0 and 2 Change-Id: I97019f0415d2f58d50ec855d04800eb705f41541 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-08-02Add UDP ports configuration to IXIA traffic profileMyron Sosyak3-0/+13
- Implemented handling of UDP source and destination ports from IXIA traffic profile. - UDP ports can be defined as a single value or as a random range. Ports range is configured with two parameters 'fixed_bits' and 'mask_bits'. - For example '8-48' range definition will create a repeatable pattern of four values that fall within the range of 8 and 56. JIRA: YARDSTICK-1363 Change-Id: I0ace722f6be843ea79c3d3f4de22cb8fa5669d4f Signed-off-by: Myron Sosyak <myronx.sosyak@intel.com> Signed-off-by: Pshyk Serhiy <serhiyx.pshyk@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-07-23Add pktgen test case base filesRodolfo Alonso Hernandez4-0/+278
Added pktgen VNF topology, VNF descriptor and traffic profile files. JIRA: YARDSTICK-1346 Change-Id: Ifb1824edb2dc8db1afa83a53573fb2ed1c2a79ea Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-07-19add support of dpdk for bottlenecks_pingYang (Gabriel) Yu1-0/+5
This patch is supposed to be coordinated with https://gerrit.opnfv.org/gerrit/59901 to support dpdk scenario for Bottlenecks JIRA: YARDSTICK-1332 Change-Id: I4ae3d05523d0624d689702cb8eb23be364830de1 Signed-off-by: Yang (Gabriel) Yu <Gabriel.yuyang@huawei.com>
2018-07-11Add ACL sample config fileMytnyk, Volodymyr1-1/+9
The acl_rules.yaml is unused, so renamed it to sample config. Updated the config with example of possible ACL configuration. JIRA: YARDSTICK-1304 Change-Id: If0537cf55f4c96f57844caed5bf1c9050647e0d5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-07-05Enable traffic generator PID in "NSPerf" scenario setupRodolfo Alonso Hernandez1-0/+96
Now "NSPerf" scenario will inform about the traffic generator PIDs after setup process. With this information, IterationIPC runner will be able to receive the messages sent by those traffic generators and control the main iteration loop. The following example, using vFW as VNF and OpenStack as context, makes use of this new runner implementation: /samples/vnf_samples/nsut/vfw/ tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_iterationipc.yaml JIRA: YARDSTICK-1127 Change-Id: I46b1368bc209680b88ff9fb5c3b9beadf6271ac9 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-27NSB NFVi PROX BNG losing many packetsDanielMartinBuckley9-23/+45
JIRA: YARDSTICK-1101 Problem was incorrect generator and changed the traffic profile to allow a tolerated loss of 5%. ARP packets are not managed (just passed thru the system) therefor the tolerated loss must be higehr than normal. Change-Id: I03bd62b397a66b50961e810d033c6894d0b3e9a6 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-27NSB NFVi PROX VPE losing many packetsDanielMartinBuckley3-6/+9
JIRA: YARDSTICK-1105 Running a vPE test ends up with up to 25% drooped packets. This is due to tolerated loss being incorrectly configured, test duration was too short and test interval was too short. Note This is due to the fact that vPE use case have by default a tolerated loss of 100%, Now changed to 0.001, same as L2FWD Also: Grafan dashboard has been updated to show all SUT CPUS Utilization in 1 panel. And LINE rate MIN, MAX & TEST Rate have been added Change-Id: I7adae2199b3f656fe460705b6aeb3aa69c767d50 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Merge "Addition of Configurable Sampling and Configurable Confirmation Retry"Abhijit Sinha1-2/+8
2018-06-26Addition of Configurable Sampling and Configurable Confirmation RetryDanielMartinBuckley1-2/+8
JIRA: YARDSTICK-1221 In order to increase accuracy of result the following are done :- - Improve Measurement Accuracy (YARDSTICK-1212) - Improve Sampling Interval (YARDSTICK-1219) - Allow 4 PROX ports to be read simultaneously (YARDSTICK-1220) This change does the following :- - Stores LINE Rate statistics of Sample - Requires a confirmation retry before deciding to increase or decrease this is configurable. - Allows the user to disable Sampling or specify a sample interval - Added Code Coverage of ProxDurationRunner based on YARDSTICK-1199 Change-Id: I27242ac1849c9a2712866385b5fbc05977c71516 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26NSB Topology fix for Prox 4 port test caseAbhijit Sinha14-47/+52
The uplink and downlink interfaces for the 4 port test cases were inconsistent and fixed in this commit. This affects all the 4 port PROX test cases. Tested on: Heat L2fwd-4 and L3fwd-4 test case. JIRA: YARDSTICK-1185 Change-Id: Ia2ce7ed0dc395b812f84ede94e259b42dc833579 Signed-off-by:Abhijit Sinha <abhijit.sinha@intel.com>
2018-06-22Merge "Configure ACL via static file"Abhijit Sinha4-136/+108
2018-06-21Configure ACL via static fileMytnyk, Volodymyr4-136/+108
This patch allows user to configure ACL/vFW SampleVNF ACL via configuration file provided in TC definition. The Yardstick applies the rules to SampleVNF from specified config file + rules generated by Yardstick (default rules). The example of SampleVNF ACL CLI commands generated/applied by Yardstick can be found at (using default ACL config file): ACL VNF ACL CLI commands: acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723303/ vFW VNF ACL CLI commands: vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723304/ Change-Id: I76a630261a982083b628e3985fc3bec14ca495db Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-06-21Merge "Add scale out TCs with availability zone support"Rodolfo Alonso Hernandez5-0/+435
2018-06-20Merge "Add "duration" parameter to test case definition"Rodolfo Alonso Hernandez20-38/+21
2018-06-18Update pmd/lcore mask for OVS-DPDK contextStepan Andrushko1-3/+5
Added default values for pmd/lcore mask to the SampleVNF test case for Trex TG. lcore mask - specifies the CPU cores used for non-datapath OVS-DPDK threads. pmd mask - specifies the CPU cores used for data path packet processing. Updated documentation for Standalone OVS-DPDK context. JIRA: YARDSTICK-1246 Change-Id: I8d008a185c94d2047ffa4769d7974bc4d283fd7f Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
2018-06-18Add "duration" parameter to test case definitionRodolfo Alonso Hernandez20-38/+21
Add "duration" parameter to test case definition, in scenario:options section. This parameter will be rendered in the traffic profile. If the parameter is not present in the test case scenario options, the default time written in the traffic profile options will be 30 seconds (TrafficProfile.DEFAULT_DURATION = 30). If the traffic profile injection time is not defined, the default injection time will be 30 seconds. testcase:scenario:options:duration (default = 30) render --> traffic_profile:duration parse --> TrafficProfile.duration (default = 30) Target traffic profiles (RFC2544): - RFC2544Profile - IXIARFC2544Profile JIRA: YARDSTICK-1194 Change-Id: I968922e6bb882d7ee15aa1c4db4037face7a3492 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-07Fix latency in l2 and l3 PROX generator config filesXavier Simonart4-20/+85
JIRA: YARDSTICK-1211 Change-Id: I0899d470ca5a0ec7d42d36a9ff9c39cc7369310c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-05-28Merge "PROX: [WIP] Added scale up TCs."Rodolfo Alonso Hernandez10-0/+810
2018-05-25Add scale out TCs with availability zone supportMytnyk, Volodymyr5-0/+435
Add PROX and vFW scale out TCs with availability zone configuration. To be able to specify the availability zone for specific VNF or TG the following example of command line option shoud be used: yardstick -d task start --task-args='{ "num_vnfs": 2, "availability_zone": { "vnf_0": "az_0", "tg_0": "az_0", "vnf_1": "az_1", "tg_1": "az_1", ... }}' <SCALE-OUT-TC-FILE> The steps to run new scale-out TCs is documented in the userguide. JIRA: YARDSTICK-1203 Change-Id: Ib3878485c5483981fe9b48ab02995712bcc31ae5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-05-14Merge "Fix Prox L2fwd generator packet"Abhijit Sinha2-12/+7
2018-05-09Update samples/test_suite.yamlEmma Foley1-1/+2
The sample test suite at sample/test_suite.yaml contained incorrect syntax. It has been updated to add the "default" parameter to "task_args" when running a testcase. JIRA: YARDSTICK-1125 Change-Id: I53409168e47d969317145623df1e2c789396cc32 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-05-09Fix Prox L2fwd generator packetAbhijit Sinha2-12/+7
The Prox L2-fwd test case has a bad packet, which fails the test case to run in OpenStack context as it's dropped by the neutron. This fix is needed to successfully run the L2fwd 2 and 4 port test cases in heat based test cases. Change-Id: I86df31a6df1eaa6f968e46af159ac6a0157f402c JIRA: YARDSTICK-1164 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>