summaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2018-08-21Merge "NSB NFVi PROX BNG and vPE losing many packets"Abhijit Sinha9-10/+109
2018-08-03IXIA: Add IP random range `seed` configuration optionMyron Sosyak3-0/+12
Added IP random range `seed` configuration option into IXIA traffic profile. JIRA: YARDSTICK-1364 Change-Id: Ic050b6cc48ea75ac6d0470bf7ec1b188649811e1 Signed-off-by: Sosyak, Myronx <myronx.sosyak@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-08-02NSB NFVi PROX BNG and vPE losing many packetsDanielMartinBuckley9-10/+109
JIRA: YARDSTICK-1101 The traffic generated by the generator in bng-4 result in non-symmetrical use of the cores on the SUT, as a whole range of IP addresses is skipped. Update cpe0 and cpe1 in gen files. In addition, for the routing table (ipv4.lua) for the BNG should be slighly different: while the BNG is a 4 ports test, only 2 of the ports are used as outgoing routing ports (the inet ports). Hence, the routing table should only use the mac of those two ports. The bad configuration (using 4 ports) result in an issue when BNG SUT and GEN are connected through a switch, packets are sent by the BNG SUT through the INET interfaces, but sometimes with the MAC of the CPE interface... Hence, packets are received on the wrong interface on the Gen site (resulting in some interfaces, the CPE ones, being overloaded) Created ipv4_bng.lua and remove mac 0 and 2 Change-Id: I97019f0415d2f58d50ec855d04800eb705f41541 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-08-02Add UDP ports configuration to IXIA traffic profileMyron Sosyak3-0/+13
- Implemented handling of UDP source and destination ports from IXIA traffic profile. - UDP ports can be defined as a single value or as a random range. Ports range is configured with two parameters 'fixed_bits' and 'mask_bits'. - For example '8-48' range definition will create a repeatable pattern of four values that fall within the range of 8 and 56. JIRA: YARDSTICK-1363 Change-Id: I0ace722f6be843ea79c3d3f4de22cb8fa5669d4f Signed-off-by: Myron Sosyak <myronx.sosyak@intel.com> Signed-off-by: Pshyk Serhiy <serhiyx.pshyk@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-07-23Add pktgen test case base filesRodolfo Alonso Hernandez4-0/+278
Added pktgen VNF topology, VNF descriptor and traffic profile files. JIRA: YARDSTICK-1346 Change-Id: Ifb1824edb2dc8db1afa83a53573fb2ed1c2a79ea Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-07-19add support of dpdk for bottlenecks_pingYang (Gabriel) Yu1-0/+5
This patch is supposed to be coordinated with https://gerrit.opnfv.org/gerrit/59901 to support dpdk scenario for Bottlenecks JIRA: YARDSTICK-1332 Change-Id: I4ae3d05523d0624d689702cb8eb23be364830de1 Signed-off-by: Yang (Gabriel) Yu <Gabriel.yuyang@huawei.com>
2018-07-11Add ACL sample config fileMytnyk, Volodymyr1-1/+9
The acl_rules.yaml is unused, so renamed it to sample config. Updated the config with example of possible ACL configuration. JIRA: YARDSTICK-1304 Change-Id: If0537cf55f4c96f57844caed5bf1c9050647e0d5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-07-05Enable traffic generator PID in "NSPerf" scenario setupRodolfo Alonso Hernandez1-0/+96
Now "NSPerf" scenario will inform about the traffic generator PIDs after setup process. With this information, IterationIPC runner will be able to receive the messages sent by those traffic generators and control the main iteration loop. The following example, using vFW as VNF and OpenStack as context, makes use of this new runner implementation: /samples/vnf_samples/nsut/vfw/ tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_iterationipc.yaml JIRA: YARDSTICK-1127 Change-Id: I46b1368bc209680b88ff9fb5c3b9beadf6271ac9 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-27NSB NFVi PROX BNG losing many packetsDanielMartinBuckley9-23/+45
JIRA: YARDSTICK-1101 Problem was incorrect generator and changed the traffic profile to allow a tolerated loss of 5%. ARP packets are not managed (just passed thru the system) therefor the tolerated loss must be higehr than normal. Change-Id: I03bd62b397a66b50961e810d033c6894d0b3e9a6 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-27NSB NFVi PROX VPE losing many packetsDanielMartinBuckley3-6/+9
JIRA: YARDSTICK-1105 Running a vPE test ends up with up to 25% drooped packets. This is due to tolerated loss being incorrectly configured, test duration was too short and test interval was too short. Note This is due to the fact that vPE use case have by default a tolerated loss of 100%, Now changed to 0.001, same as L2FWD Also: Grafan dashboard has been updated to show all SUT CPUS Utilization in 1 panel. And LINE rate MIN, MAX & TEST Rate have been added Change-Id: I7adae2199b3f656fe460705b6aeb3aa69c767d50 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Merge "Addition of Configurable Sampling and Configurable Confirmation Retry"Abhijit Sinha1-2/+8
2018-06-26Addition of Configurable Sampling and Configurable Confirmation RetryDanielMartinBuckley1-2/+8
JIRA: YARDSTICK-1221 In order to increase accuracy of result the following are done :- - Improve Measurement Accuracy (YARDSTICK-1212) - Improve Sampling Interval (YARDSTICK-1219) - Allow 4 PROX ports to be read simultaneously (YARDSTICK-1220) This change does the following :- - Stores LINE Rate statistics of Sample - Requires a confirmation retry before deciding to increase or decrease this is configurable. - Allows the user to disable Sampling or specify a sample interval - Added Code Coverage of ProxDurationRunner based on YARDSTICK-1199 Change-Id: I27242ac1849c9a2712866385b5fbc05977c71516 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26NSB Topology fix for Prox 4 port test caseAbhijit Sinha14-47/+52
The uplink and downlink interfaces for the 4 port test cases were inconsistent and fixed in this commit. This affects all the 4 port PROX test cases. Tested on: Heat L2fwd-4 and L3fwd-4 test case. JIRA: YARDSTICK-1185 Change-Id: Ia2ce7ed0dc395b812f84ede94e259b42dc833579 Signed-off-by:Abhijit Sinha <abhijit.sinha@intel.com>
2018-06-22Merge "Configure ACL via static file"Abhijit Sinha4-136/+108
2018-06-21Configure ACL via static fileMytnyk, Volodymyr4-136/+108
This patch allows user to configure ACL/vFW SampleVNF ACL via configuration file provided in TC definition. The Yardstick applies the rules to SampleVNF from specified config file + rules generated by Yardstick (default rules). The example of SampleVNF ACL CLI commands generated/applied by Yardstick can be found at (using default ACL config file): ACL VNF ACL CLI commands: acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723303/ vFW VNF ACL CLI commands: vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723304/ Change-Id: I76a630261a982083b628e3985fc3bec14ca495db Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-06-21Merge "Add scale out TCs with availability zone support"Rodolfo Alonso Hernandez5-0/+435
2018-06-20Merge "Add "duration" parameter to test case definition"Rodolfo Alonso Hernandez20-38/+21
2018-06-18Update pmd/lcore mask for OVS-DPDK contextStepan Andrushko1-3/+5
Added default values for pmd/lcore mask to the SampleVNF test case for Trex TG. lcore mask - specifies the CPU cores used for non-datapath OVS-DPDK threads. pmd mask - specifies the CPU cores used for data path packet processing. Updated documentation for Standalone OVS-DPDK context. JIRA: YARDSTICK-1246 Change-Id: I8d008a185c94d2047ffa4769d7974bc4d283fd7f Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
2018-06-18Add "duration" parameter to test case definitionRodolfo Alonso Hernandez20-38/+21
Add "duration" parameter to test case definition, in scenario:options section. This parameter will be rendered in the traffic profile. If the parameter is not present in the test case scenario options, the default time written in the traffic profile options will be 30 seconds (TrafficProfile.DEFAULT_DURATION = 30). If the traffic profile injection time is not defined, the default injection time will be 30 seconds. testcase:scenario:options:duration (default = 30) render --> traffic_profile:duration parse --> TrafficProfile.duration (default = 30) Target traffic profiles (RFC2544): - RFC2544Profile - IXIARFC2544Profile JIRA: YARDSTICK-1194 Change-Id: I968922e6bb882d7ee15aa1c4db4037face7a3492 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-07Fix latency in l2 and l3 PROX generator config filesXavier Simonart4-20/+85
JIRA: YARDSTICK-1211 Change-Id: I0899d470ca5a0ec7d42d36a9ff9c39cc7369310c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-05-28Merge "PROX: [WIP] Added scale up TCs."Rodolfo Alonso Hernandez10-0/+810
2018-05-25Add scale out TCs with availability zone supportMytnyk, Volodymyr5-0/+435
Add PROX and vFW scale out TCs with availability zone configuration. To be able to specify the availability zone for specific VNF or TG the following example of command line option shoud be used: yardstick -d task start --task-args='{ "num_vnfs": 2, "availability_zone": { "vnf_0": "az_0", "tg_0": "az_0", "vnf_1": "az_1", "tg_1": "az_1", ... }}' <SCALE-OUT-TC-FILE> The steps to run new scale-out TCs is documented in the userguide. JIRA: YARDSTICK-1203 Change-Id: Ib3878485c5483981fe9b48ab02995712bcc31ae5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-05-14Merge "Fix Prox L2fwd generator packet"Abhijit Sinha2-12/+7
2018-05-09Update samples/test_suite.yamlEmma Foley1-1/+2
The sample test suite at sample/test_suite.yaml contained incorrect syntax. It has been updated to add the "default" parameter to "task_args" when running a testcase. JIRA: YARDSTICK-1125 Change-Id: I53409168e47d969317145623df1e2c789396cc32 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-05-09Fix Prox L2fwd generator packetAbhijit Sinha2-12/+7
The Prox L2-fwd test case has a bad packet, which fails the test case to run in OpenStack context as it's dropped by the neutron. This fix is needed to successfully run the L2fwd 2 and 4 port test cases in heat based test cases. Change-Id: I86df31a6df1eaa6f968e46af159ac6a0157f402c JIRA: YARDSTICK-1164 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-05-04Add IxNetwork API Python Binding packageRodolfo Alonso Hernandez3-3/+0
Add IxNetwork python package to the requirements list. This module is needed for the "NSPerf" scenarios using IXIA as traffic generator, when IxNetwork is the program used to handle the IXIA generator. The latest version of this module is 8.40.1124.9 [1]. The license type is MIT. [1] https://pypi.python.org/pypi/ixnetwork JIRA: YARDSTICK-1106 Change-Id: I279933c95994f5120930256a104c4192a0b9900d Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-22fix Dummy test context namerexlee87763-1/+3
more dummy test fix base on I0ccb7e9fabdf6bc2890d2e4763f53baee06c87b2 Since I1447fb5ed447691eaeb0a97f928c0b3333799d07, the context name is a mandatory parameter for every context. JIRA: YARDSTICK-886 Change-Id: I10ee6bcc0507fa90b6e99261a98a96655fc66947 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-03-21Offline support for bottlenecks projectliyin3-6/+144
JIRA: YARDSTICK-1053 Those three yaml files are for bottlenecks support offiline flavor The ssh time out problem will fix in changing the duration time Change-Id: Ifd317404a820d0446ffab5070211e48def1a0d2f Signed-off-by: liyin <liyin11@huawei.com>
2018-03-16Merge "NSB PROX L3FWD Dropping packets"Abhijit Sinha10-97/+207
2018-03-15NSB PROX L3FWD Dropping packetsDanielMartinBuckley10-97/+207
JIRA: YARDSTICK-1037 NSB PROX L3FWD was incorrect. The routing table (ipv4.lua) was incorrect. Also a specific ipv4 for 2 port configuration is required. Change-Id: I3a5fd1ea1d1ddf74cbdd6a5d9e7ced42d3c1d6e9 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-03-15Merge "support for Bottlenecks soak throughputs"Jing Lu1-0/+71
2018-03-15support for Bottlenecks soak throughputsYang Yu1-0/+71
JIRA: YARDSTICK-1049 Changes: 1. NetperfNode -> Netperf, it seems that yardstick-image has not correctly complied Netperf since cpuutil is not available, resulting that LOCAL_CPU_UTIL=-1 for the output. Will create another JIRA ticket for this. Change-Id: I26a85f4aafcc5d5e1eda3e04272ecf3b059238fc Signed-off-by: Yang Yu <Gabriel.yuyang@huawei.com>
2018-03-12Merge "Add context name to Dummy test"Abhijit Sinha1-0/+1
2018-03-09Do NOT hardcode interface speed for PROX testsDanielMartinBuckley2-0/+4
JIRA: YARDSTICK-1035 Do not hardcode NIC/interface speed in PROX test. Test assumes NIC used is 10Gbps. This is incorrect. It could support 1Gbps, 10Gbps, 25Gbps, 40Gbps or something else. This is used to calculate pps (Packets Per Second) In Baremetal the NIC speed could be extracted. however when run on a virtual machine this is not possible. Solution: Add in options section of test file. eg. Options: interface_speed_gbps: 10 Where 10 refers to a 10Gbps. In a setup where multiple interfaces are used. This will refer to the speed of the slowest connection. Change-Id: I89ab16479a2cdd1d79e52cbcc5a972762c60d057 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-03-09Add context name to Dummy testRodolfo Alonso Hernandez1-0/+1
Since I1447fb5ed447691eaeb0a97f928c0b3333799d07, the context name is a mandatory parameter for every context. JIRA: YARDSTICK-886 Change-Id: I0ccb7e9fabdf6bc2890d2e4763f53baee06c87b2 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-07Merge "Add l2fwd module in Tgen mode"Jack Chan2-0/+202
2018-03-07Merge "Add test case sample to enable mixed network"Jack Chan1-0/+65
2018-03-06Merge "Enable heat context to support existing network"Jack Chan2-0/+108
2018-03-05PROX: [WIP] Added scale up TCs.Mytnyk, Volodymyr10-0/+810
These scale-up TCs replace PROX static TCs which will be removed by separate commit once those new TCs are merged. Change-Id: I892a81c4bfd199782fb561faccc11e70a49675ae Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-03-01vFW scale-up template.Mytnyk, Volodymyr8-0/+502
Added topology and traffic profile templates Added support for using JinJa2 templates in topology definition Added support for static pipeline configs for SampleVNFs JIRA: YARDSTICK-1043 Change-Id: Iab99fd5b5ad69ca32ee70b9fe47779387ad27e7f Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-28Merge "Addition of storage of extra counters for Grafana"Abhijit Sinha3-11/+21
2018-02-28Addition of storage of extra counters for GrafanaDanielMartinBuckley3-11/+21
JIRA: YARDSTICK-1036 This stores a number of extra counters in influxdb for Prox test cases. It also stores existing counters with a "succcess_" tag. Previously throughput where stored without success or failure indication. Also "Result_" counters are also stored. These can now be used by Grafana to graph output. Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-02-28Add l2fwd module in Tgen modeAce Lee2-0/+202
JIRA: YARDSTICK-796 Add l2fwd testcase in Tgen mode(Moongen) fix offiline problem in Tgen mode. Change-Id: I2ee224157a4f1d78e85fcae192a65afd33a1a515 Signed-off-by: Ace Lee <liyin11@huawei.com>
2018-02-27Add test case sample to enable mixed networkrexlee87761-0/+65
JIRA: YARDSTICK-1001 Change-Id: Ia6985795b757e5f8ff29cb1c23d909d80502fae5 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-02-27Enable heat context to support existing networkrexlee87762-0/+108
JIRA: YARDSTICK-970 Change-Id: I593af4b3a30e52521e3d77fd84bec16ab4733483 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-02-26Merge "Testcase to find storage bottlenecks using Yardstick for Multistack"Rex Lee1-0/+77
2018-02-26Testcase to find storage bottlenecks using Yardstick for MultistackAce Lee1-0/+77
JIRA: BOTTLENECK-217 This patch is used to find storage bottlenecks while using yardstick for multistack. Shubham is busy for his exam, I can't change his patch, so I need to resubmit a patch. Change-Id: Ibf8ec3ae7f19b27254eedabb1b95bd89a0993ed7 Signed-off-by: Ace Lee <liyin11@huawei.com>
2018-02-19Make segmentation_id configurable for tc_heat_rfc2544_ipv4_1rule_1flow_64B_trexMytnyk, Volodymyr1-0/+7
Updated vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml TC to be able to configure segmentation_id from commmand line. E.g.: yardstick -d task start --task-args='{"provider": "sriov", \ "segmentation_id": 100}' ... JIRA: YARDSTICK-1004 Change-Id: I53daae3468de2a1f523bd96817143a5f809238a2 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-15Merge "Update heat RFC2544 based TC to support SRIOV VF ports."Emma Foley1-0/+11
2018-02-14BugFix: Fix to pod context filenameXavier Simonart1-1/+1
The "context:file" of tc_prox_baremetal_lw_aftr has an incorrect path, compaired to all other prox test cases. Change-Id: Id24e74905f36bc84fdf93d1a2966211ecad55c8b Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>