aboutsummaryrefslogtreecommitdiffstats
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2018-06-27NSB NFVi PROX VPE losing many packetsDanielMartinBuckley3-6/+9
JIRA: YARDSTICK-1105 Running a vPE test ends up with up to 25% drooped packets. This is due to tolerated loss being incorrectly configured, test duration was too short and test interval was too short. Note This is due to the fact that vPE use case have by default a tolerated loss of 100%, Now changed to 0.001, same as L2FWD Also: Grafan dashboard has been updated to show all SUT CPUS Utilization in 1 panel. And LINE rate MIN, MAX & TEST Rate have been added Change-Id: I7adae2199b3f656fe460705b6aeb3aa69c767d50 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Merge "Addition of Configurable Sampling and Configurable Confirmation Retry"Abhijit Sinha1-2/+8
2018-06-26Addition of Configurable Sampling and Configurable Confirmation RetryDanielMartinBuckley1-2/+8
JIRA: YARDSTICK-1221 In order to increase accuracy of result the following are done :- - Improve Measurement Accuracy (YARDSTICK-1212) - Improve Sampling Interval (YARDSTICK-1219) - Allow 4 PROX ports to be read simultaneously (YARDSTICK-1220) This change does the following :- - Stores LINE Rate statistics of Sample - Requires a confirmation retry before deciding to increase or decrease this is configurable. - Allows the user to disable Sampling or specify a sample interval - Added Code Coverage of ProxDurationRunner based on YARDSTICK-1199 Change-Id: I27242ac1849c9a2712866385b5fbc05977c71516 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26NSB Topology fix for Prox 4 port test caseAbhijit Sinha14-47/+52
The uplink and downlink interfaces for the 4 port test cases were inconsistent and fixed in this commit. This affects all the 4 port PROX test cases. Tested on: Heat L2fwd-4 and L3fwd-4 test case. JIRA: YARDSTICK-1185 Change-Id: Ia2ce7ed0dc395b812f84ede94e259b42dc833579 Signed-off-by:Abhijit Sinha <abhijit.sinha@intel.com>
2018-06-22Merge "Configure ACL via static file"Abhijit Sinha4-136/+108
2018-06-21Configure ACL via static fileMytnyk, Volodymyr4-136/+108
This patch allows user to configure ACL/vFW SampleVNF ACL via configuration file provided in TC definition. The Yardstick applies the rules to SampleVNF from specified config file + rules generated by Yardstick (default rules). The example of SampleVNF ACL CLI commands generated/applied by Yardstick can be found at (using default ACL config file): ACL VNF ACL CLI commands: acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723303/ vFW VNF ACL CLI commands: vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723304/ Change-Id: I76a630261a982083b628e3985fc3bec14ca495db Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-06-21Merge "Add scale out TCs with availability zone support"Rodolfo Alonso Hernandez5-0/+435
2018-06-20Merge "Add "duration" parameter to test case definition"Rodolfo Alonso Hernandez20-38/+21
2018-06-18Update pmd/lcore mask for OVS-DPDK contextStepan Andrushko1-3/+5
Added default values for pmd/lcore mask to the SampleVNF test case for Trex TG. lcore mask - specifies the CPU cores used for non-datapath OVS-DPDK threads. pmd mask - specifies the CPU cores used for data path packet processing. Updated documentation for Standalone OVS-DPDK context. JIRA: YARDSTICK-1246 Change-Id: I8d008a185c94d2047ffa4769d7974bc4d283fd7f Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
2018-06-18Add "duration" parameter to test case definitionRodolfo Alonso Hernandez20-38/+21
Add "duration" parameter to test case definition, in scenario:options section. This parameter will be rendered in the traffic profile. If the parameter is not present in the test case scenario options, the default time written in the traffic profile options will be 30 seconds (TrafficProfile.DEFAULT_DURATION = 30). If the traffic profile injection time is not defined, the default injection time will be 30 seconds. testcase:scenario:options:duration (default = 30) render --> traffic_profile:duration parse --> TrafficProfile.duration (default = 30) Target traffic profiles (RFC2544): - RFC2544Profile - IXIARFC2544Profile JIRA: YARDSTICK-1194 Change-Id: I968922e6bb882d7ee15aa1c4db4037face7a3492 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-07Fix latency in l2 and l3 PROX generator config filesXavier Simonart4-20/+85
JIRA: YARDSTICK-1211 Change-Id: I0899d470ca5a0ec7d42d36a9ff9c39cc7369310c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-05-28Merge "PROX: [WIP] Added scale up TCs."Rodolfo Alonso Hernandez10-0/+810
2018-05-25Add scale out TCs with availability zone supportMytnyk, Volodymyr5-0/+435
Add PROX and vFW scale out TCs with availability zone configuration. To be able to specify the availability zone for specific VNF or TG the following example of command line option shoud be used: yardstick -d task start --task-args='{ "num_vnfs": 2, "availability_zone": { "vnf_0": "az_0", "tg_0": "az_0", "vnf_1": "az_1", "tg_1": "az_1", ... }}' <SCALE-OUT-TC-FILE> The steps to run new scale-out TCs is documented in the userguide. JIRA: YARDSTICK-1203 Change-Id: Ib3878485c5483981fe9b48ab02995712bcc31ae5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-05-14Merge "Fix Prox L2fwd generator packet"Abhijit Sinha2-12/+7
2018-05-09Update samples/test_suite.yamlEmma Foley1-1/+2
The sample test suite at sample/test_suite.yaml contained incorrect syntax. It has been updated to add the "default" parameter to "task_args" when running a testcase. JIRA: YARDSTICK-1125 Change-Id: I53409168e47d969317145623df1e2c789396cc32 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-05-09Fix Prox L2fwd generator packetAbhijit Sinha2-12/+7
The Prox L2-fwd test case has a bad packet, which fails the test case to run in OpenStack context as it's dropped by the neutron. This fix is needed to successfully run the L2fwd 2 and 4 port test cases in heat based test cases. Change-Id: I86df31a6df1eaa6f968e46af159ac6a0157f402c JIRA: YARDSTICK-1164 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-05-04Add IxNetwork API Python Binding packageRodolfo Alonso Hernandez3-3/+0
Add IxNetwork python package to the requirements list. This module is needed for the "NSPerf" scenarios using IXIA as traffic generator, when IxNetwork is the program used to handle the IXIA generator. The latest version of this module is 8.40.1124.9 [1]. The license type is MIT. [1] https://pypi.python.org/pypi/ixnetwork JIRA: YARDSTICK-1106 Change-Id: I279933c95994f5120930256a104c4192a0b9900d Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-22fix Dummy test context namerexlee87763-1/+3
more dummy test fix base on I0ccb7e9fabdf6bc2890d2e4763f53baee06c87b2 Since I1447fb5ed447691eaeb0a97f928c0b3333799d07, the context name is a mandatory parameter for every context. JIRA: YARDSTICK-886 Change-Id: I10ee6bcc0507fa90b6e99261a98a96655fc66947 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-03-21Offline support for bottlenecks projectliyin3-6/+144
JIRA: YARDSTICK-1053 Those three yaml files are for bottlenecks support offiline flavor The ssh time out problem will fix in changing the duration time Change-Id: Ifd317404a820d0446ffab5070211e48def1a0d2f Signed-off-by: liyin <liyin11@huawei.com>
2018-03-16Merge "NSB PROX L3FWD Dropping packets"Abhijit Sinha10-97/+207
2018-03-15NSB PROX L3FWD Dropping packetsDanielMartinBuckley10-97/+207
JIRA: YARDSTICK-1037 NSB PROX L3FWD was incorrect. The routing table (ipv4.lua) was incorrect. Also a specific ipv4 for 2 port configuration is required. Change-Id: I3a5fd1ea1d1ddf74cbdd6a5d9e7ced42d3c1d6e9 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-03-15Merge "support for Bottlenecks soak throughputs"Jing Lu1-0/+71
2018-03-15support for Bottlenecks soak throughputsYang Yu1-0/+71
JIRA: YARDSTICK-1049 Changes: 1. NetperfNode -> Netperf, it seems that yardstick-image has not correctly complied Netperf since cpuutil is not available, resulting that LOCAL_CPU_UTIL=-1 for the output. Will create another JIRA ticket for this. Change-Id: I26a85f4aafcc5d5e1eda3e04272ecf3b059238fc Signed-off-by: Yang Yu <Gabriel.yuyang@huawei.com>
2018-03-12Merge "Add context name to Dummy test"Abhijit Sinha1-0/+1
2018-03-09Do NOT hardcode interface speed for PROX testsDanielMartinBuckley2-0/+4
JIRA: YARDSTICK-1035 Do not hardcode NIC/interface speed in PROX test. Test assumes NIC used is 10Gbps. This is incorrect. It could support 1Gbps, 10Gbps, 25Gbps, 40Gbps or something else. This is used to calculate pps (Packets Per Second) In Baremetal the NIC speed could be extracted. however when run on a virtual machine this is not possible. Solution: Add in options section of test file. eg. Options: interface_speed_gbps: 10 Where 10 refers to a 10Gbps. In a setup where multiple interfaces are used. This will refer to the speed of the slowest connection. Change-Id: I89ab16479a2cdd1d79e52cbcc5a972762c60d057 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-03-09Add context name to Dummy testRodolfo Alonso Hernandez1-0/+1
Since I1447fb5ed447691eaeb0a97f928c0b3333799d07, the context name is a mandatory parameter for every context. JIRA: YARDSTICK-886 Change-Id: I0ccb7e9fabdf6bc2890d2e4763f53baee06c87b2 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-03-07Merge "Add l2fwd module in Tgen mode"Jack Chan2-0/+202
2018-03-07Merge "Add test case sample to enable mixed network"Jack Chan1-0/+65
2018-03-06Merge "Enable heat context to support existing network"Jack Chan2-0/+108
2018-03-05PROX: [WIP] Added scale up TCs.Mytnyk, Volodymyr10-0/+810
These scale-up TCs replace PROX static TCs which will be removed by separate commit once those new TCs are merged. Change-Id: I892a81c4bfd199782fb561faccc11e70a49675ae Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-03-01vFW scale-up template.Mytnyk, Volodymyr8-0/+502
Added topology and traffic profile templates Added support for using JinJa2 templates in topology definition Added support for static pipeline configs for SampleVNFs JIRA: YARDSTICK-1043 Change-Id: Iab99fd5b5ad69ca32ee70b9fe47779387ad27e7f Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-28Merge "Addition of storage of extra counters for Grafana"Abhijit Sinha3-11/+21
2018-02-28Addition of storage of extra counters for GrafanaDanielMartinBuckley3-11/+21
JIRA: YARDSTICK-1036 This stores a number of extra counters in influxdb for Prox test cases. It also stores existing counters with a "succcess_" tag. Previously throughput where stored without success or failure indication. Also "Result_" counters are also stored. These can now be used by Grafana to graph output. Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-02-28Add l2fwd module in Tgen modeAce Lee2-0/+202
JIRA: YARDSTICK-796 Add l2fwd testcase in Tgen mode(Moongen) fix offiline problem in Tgen mode. Change-Id: I2ee224157a4f1d78e85fcae192a65afd33a1a515 Signed-off-by: Ace Lee <liyin11@huawei.com>
2018-02-27Add test case sample to enable mixed networkrexlee87761-0/+65
JIRA: YARDSTICK-1001 Change-Id: Ia6985795b757e5f8ff29cb1c23d909d80502fae5 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-02-27Enable heat context to support existing networkrexlee87762-0/+108
JIRA: YARDSTICK-970 Change-Id: I593af4b3a30e52521e3d77fd84bec16ab4733483 Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-02-26Merge "Testcase to find storage bottlenecks using Yardstick for Multistack"Rex Lee1-0/+77
2018-02-26Testcase to find storage bottlenecks using Yardstick for MultistackAce Lee1-0/+77
JIRA: BOTTLENECK-217 This patch is used to find storage bottlenecks while using yardstick for multistack. Shubham is busy for his exam, I can't change his patch, so I need to resubmit a patch. Change-Id: Ibf8ec3ae7f19b27254eedabb1b95bd89a0993ed7 Signed-off-by: Ace Lee <liyin11@huawei.com>
2018-02-19Make segmentation_id configurable for tc_heat_rfc2544_ipv4_1rule_1flow_64B_trexMytnyk, Volodymyr1-0/+7
Updated vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml TC to be able to configure segmentation_id from commmand line. E.g.: yardstick -d task start --task-args='{"provider": "sriov", \ "segmentation_id": 100}' ... JIRA: YARDSTICK-1004 Change-Id: I53daae3468de2a1f523bd96817143a5f809238a2 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-15Merge "Update heat RFC2544 based TC to support SRIOV VF ports."Emma Foley1-0/+11
2018-02-14BugFix: Fix to pod context filenameXavier Simonart1-1/+1
The "context:file" of tc_prox_baremetal_lw_aftr has an incorrect path, compaired to all other prox test cases. Change-Id: Id24e74905f36bc84fdf93d1a2966211ecad55c8b Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-02-14Update heat RFC2544 based TC to support SRIOV VF ports.Mytnyk, Volodymyr1-0/+11
Updated vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml TC to be able to run it in heat context with SRIOV VF ports configured in OpenStack. E.g.: yardstick task start --task-args='{"provider": "sriov"}' ... yardstick task start --task-args='{"provider": "sriov"}\ physical_networks: ["physnet1", "physnet2"]}' ... Console log: http://paste.openstack.org/show/666931/ Result output: http://paste.openstack.org/show/666930/ JIRA: YARDSTICK-1004 Change-Id: If0dabd0791e4e295782fee0f3de1536474218876 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-08Prox vnf descriptor cleanupAbhijit Sinha9-195/+6
JIRA: YARDSTICK-1003 - There are redundant files for Prox vnf descriptors tg and vnf for 1, 2 and 4 port set-up. - We can use one vnf descriptor file per prox tg and prox vnf, reducing the number of redundant files. - Tested on Prox BM L2fwd 2 and 4 port test case. Change-Id: I4c61fd11725121f19392443460ac2ad39c934e2d Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-02-01Merge "Adding new vFirewall Test cases based on Concurrency, Connections per ↵Ross Brattain59-0/+2980
second, Throughput and Transactions per second for various http locator image sizes including 1b, 4k, 64k, 256k, 1024k"
2018-01-30Add sample OpenStack/SRIOV RFC2544 based TCMytnyk, Volodymyr1-0/+88
Add sample OpenStack/SRIOV RFC2544 based test case which can be run using external Trex. Console log: http://paste.openstack.org/show/658002/ Result output: http://paste.openstack.org/show/658004/ JIRA: YARDSTICK-967 Change-Id: Id0e2d6d47f459c7e6a3370735bab74f7ce502b24 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-01-23Cleanup of redundant files from Prox directoryAbhijit Sinha15-631/+0
JIRA: YARDSTICK-965 Removed the redundant files and directory from Prox test folder. Change-Id: I6167f0a4ccdd581153dad3ec9f5eaaf2619aacbd Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-01-02Merge "Adding vFW RFC2544 and ixload test cases with various packet sizes"Ross Brattain11-0/+714
2017-12-16samples: Add generic L3 forwarder testsDino Madarang64-0/+7134
A generic throughput test case that can be used as a stub code for a Linux-based VNF configured as an L3 forwarder. Supported context: * Standalone OVSDPDK and SRIOV * Baremetal Code changes: * Allow pmd-cpu-mask and lcore mask for OVS DPDK * router_vnf.py - configures interface IP addresses and static arp entries using ip command * NFVi KPIs * Allow cputune tag for standalone context to be able to PIN on NUMA 1 cpus SRIOV Test cases: * RFC2544 Ethernet framesizes, 128K Flows * 2,4 and 6 ports * 2 and 3 vcpus per port * OVSDPDK Test cases: * RFC2544 Ethernet framesizes, 128K Flows * 2 and 4 ports * 2 vcpus per port * 2 PMD threads per port TODO: * Documentation * Add 6 ports tests References: * router_vnf.py is based on sample_vnf.py * tc_*.yaml files are based on acl/vfw test case files Added unitests Added get_stats to parse ip -s link Change-Id: Id1b969d5420dfcab7c1e695acbd2cd1655747efe Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Signed-off-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Reviewed-by: Alain Jebara <alain.jebara@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Emma Foley <emma.l.foley@intel.com> Reviewed-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-12-14Change testcases 'cirros' image to 'yardstick-image'Rodolfo Alonso Hernandez14-31/+31
The default OpenStack 'cirros-0.3.5' image doesn't exist anymore. The image included by default in any testing OpenStack deployment is now called 'cirros-0.3.5-x86_64-disk', but this name can change. Because Yardstick, during the installation, deploys a customized image, 'yardstick-image', it makes sense to use it as the default image. JIRA: YARDSTICK-873 Change-Id: I8fd7cbc01d4fa52e9107f2fac7d2d9ff5d1091c7 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2017-12-12Merge "Adding vFirewall HTTP Traffic Profiles for tests including ↵Ross Brattain40-0/+73520
Concurrency, CPS, TPUT, TPS for 2Ports and 4Ports"