aboutsummaryrefslogtreecommitdiffstats
path: root/samples/vnf_samples/nsut
AgeCommit message (Collapse)AuthorFilesLines
2018-08-02NSB NFVi PROX BNG and vPE losing many packetsDanielMartinBuckley9-10/+109
JIRA: YARDSTICK-1101 The traffic generated by the generator in bng-4 result in non-symmetrical use of the cores on the SUT, as a whole range of IP addresses is skipped. Update cpe0 and cpe1 in gen files. In addition, for the routing table (ipv4.lua) for the BNG should be slighly different: while the BNG is a 4 ports test, only 2 of the ports are used as outgoing routing ports (the inet ports). Hence, the routing table should only use the mac of those two ports. The bad configuration (using 4 ports) result in an issue when BNG SUT and GEN are connected through a switch, packets are sent by the BNG SUT through the INET interfaces, but sometimes with the MAC of the CPE interface... Hence, packets are received on the wrong interface on the Gen site (resulting in some interfaces, the CPE ones, being overloaded) Created ipv4_bng.lua and remove mac 0 and 2 Change-Id: I97019f0415d2f58d50ec855d04800eb705f41541 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-07-23Add pktgen test case base filesRodolfo Alonso Hernandez2-0/+210
Added pktgen VNF topology, VNF descriptor and traffic profile files. JIRA: YARDSTICK-1346 Change-Id: Ifb1824edb2dc8db1afa83a53573fb2ed1c2a79ea Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-07-11Add ACL sample config fileMytnyk, Volodymyr1-1/+9
The acl_rules.yaml is unused, so renamed it to sample config. Updated the config with example of possible ACL configuration. JIRA: YARDSTICK-1304 Change-Id: If0537cf55f4c96f57844caed5bf1c9050647e0d5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-07-05Enable traffic generator PID in "NSPerf" scenario setupRodolfo Alonso Hernandez1-0/+96
Now "NSPerf" scenario will inform about the traffic generator PIDs after setup process. With this information, IterationIPC runner will be able to receive the messages sent by those traffic generators and control the main iteration loop. The following example, using vFW as VNF and OpenStack as context, makes use of this new runner implementation: /samples/vnf_samples/nsut/vfw/ tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_iterationipc.yaml JIRA: YARDSTICK-1127 Change-Id: I46b1368bc209680b88ff9fb5c3b9beadf6271ac9 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-27NSB NFVi PROX BNG losing many packetsDanielMartinBuckley8-22/+44
JIRA: YARDSTICK-1101 Problem was incorrect generator and changed the traffic profile to allow a tolerated loss of 5%. ARP packets are not managed (just passed thru the system) therefor the tolerated loss must be higehr than normal. Change-Id: I03bd62b397a66b50961e810d033c6894d0b3e9a6 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-27NSB NFVi PROX VPE losing many packetsDanielMartinBuckley2-3/+6
JIRA: YARDSTICK-1105 Running a vPE test ends up with up to 25% drooped packets. This is due to tolerated loss being incorrectly configured, test duration was too short and test interval was too short. Note This is due to the fact that vPE use case have by default a tolerated loss of 100%, Now changed to 0.001, same as L2FWD Also: Grafan dashboard has been updated to show all SUT CPUS Utilization in 1 panel. And LINE rate MIN, MAX & TEST Rate have been added Change-Id: I7adae2199b3f656fe460705b6aeb3aa69c767d50 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Merge "Addition of Configurable Sampling and Configurable Confirmation Retry"Abhijit Sinha1-2/+8
2018-06-26Addition of Configurable Sampling and Configurable Confirmation RetryDanielMartinBuckley1-2/+8
JIRA: YARDSTICK-1221 In order to increase accuracy of result the following are done :- - Improve Measurement Accuracy (YARDSTICK-1212) - Improve Sampling Interval (YARDSTICK-1219) - Allow 4 PROX ports to be read simultaneously (YARDSTICK-1220) This change does the following :- - Stores LINE Rate statistics of Sample - Requires a confirmation retry before deciding to increase or decrease this is configurable. - Allows the user to disable Sampling or specify a sample interval - Added Code Coverage of ProxDurationRunner based on YARDSTICK-1199 Change-Id: I27242ac1849c9a2712866385b5fbc05977c71516 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26NSB Topology fix for Prox 4 port test caseAbhijit Sinha14-47/+52
The uplink and downlink interfaces for the 4 port test cases were inconsistent and fixed in this commit. This affects all the 4 port PROX test cases. Tested on: Heat L2fwd-4 and L3fwd-4 test case. JIRA: YARDSTICK-1185 Change-Id: Ia2ce7ed0dc395b812f84ede94e259b42dc833579 Signed-off-by:Abhijit Sinha <abhijit.sinha@intel.com>
2018-06-22Merge "Configure ACL via static file"Abhijit Sinha4-136/+108
2018-06-21Configure ACL via static fileMytnyk, Volodymyr4-136/+108
This patch allows user to configure ACL/vFW SampleVNF ACL via configuration file provided in TC definition. The Yardstick applies the rules to SampleVNF from specified config file + rules generated by Yardstick (default rules). The example of SampleVNF ACL CLI commands generated/applied by Yardstick can be found at (using default ACL config file): ACL VNF ACL CLI commands: acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723303/ vFW VNF ACL CLI commands: vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723304/ Change-Id: I76a630261a982083b628e3985fc3bec14ca495db Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-06-21Merge "Add scale out TCs with availability zone support"Rodolfo Alonso Hernandez4-0/+333
2018-06-18Update pmd/lcore mask for OVS-DPDK contextStepan Andrushko1-3/+5
Added default values for pmd/lcore mask to the SampleVNF test case for Trex TG. lcore mask - specifies the CPU cores used for non-datapath OVS-DPDK threads. pmd mask - specifies the CPU cores used for data path packet processing. Updated documentation for Standalone OVS-DPDK context. JIRA: YARDSTICK-1246 Change-Id: I8d008a185c94d2047ffa4769d7974bc4d283fd7f Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
2018-06-07Fix latency in l2 and l3 PROX generator config filesXavier Simonart4-20/+85
JIRA: YARDSTICK-1211 Change-Id: I0899d470ca5a0ec7d42d36a9ff9c39cc7369310c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-05-28Merge "PROX: [WIP] Added scale up TCs."Rodolfo Alonso Hernandez10-0/+810
2018-05-25Add scale out TCs with availability zone supportMytnyk, Volodymyr4-0/+333
Add PROX and vFW scale out TCs with availability zone configuration. To be able to specify the availability zone for specific VNF or TG the following example of command line option shoud be used: yardstick -d task start --task-args='{ "num_vnfs": 2, "availability_zone": { "vnf_0": "az_0", "tg_0": "az_0", "vnf_1": "az_1", "tg_1": "az_1", ... }}' <SCALE-OUT-TC-FILE> The steps to run new scale-out TCs is documented in the userguide. JIRA: YARDSTICK-1203 Change-Id: Ib3878485c5483981fe9b48ab02995712bcc31ae5 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-05-09Fix Prox L2fwd generator packetAbhijit Sinha2-12/+7
The Prox L2-fwd test case has a bad packet, which fails the test case to run in OpenStack context as it's dropped by the neutron. This fix is needed to successfully run the L2fwd 2 and 4 port test cases in heat based test cases. Change-Id: I86df31a6df1eaa6f968e46af159ac6a0157f402c JIRA: YARDSTICK-1164 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-03-21Offline support for bottlenecks projectliyin1-0/+123
JIRA: YARDSTICK-1053 Those three yaml files are for bottlenecks support offiline flavor The ssh time out problem will fix in changing the duration time Change-Id: Ifd317404a820d0446ffab5070211e48def1a0d2f Signed-off-by: liyin <liyin11@huawei.com>
2018-03-16Merge "NSB PROX L3FWD Dropping packets"Abhijit Sinha10-97/+207
2018-03-15NSB PROX L3FWD Dropping packetsDanielMartinBuckley10-97/+207
JIRA: YARDSTICK-1037 NSB PROX L3FWD was incorrect. The routing table (ipv4.lua) was incorrect. Also a specific ipv4 for 2 port configuration is required. Change-Id: I3a5fd1ea1d1ddf74cbdd6a5d9e7ced42d3c1d6e9 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-03-09Do NOT hardcode interface speed for PROX testsDanielMartinBuckley2-0/+4
JIRA: YARDSTICK-1035 Do not hardcode NIC/interface speed in PROX test. Test assumes NIC used is 10Gbps. This is incorrect. It could support 1Gbps, 10Gbps, 25Gbps, 40Gbps or something else. This is used to calculate pps (Packets Per Second) In Baremetal the NIC speed could be extracted. however when run on a virtual machine this is not possible. Solution: Add in options section of test file. eg. Options: interface_speed_gbps: 10 Where 10 refers to a 10Gbps. In a setup where multiple interfaces are used. This will refer to the speed of the slowest connection. Change-Id: I89ab16479a2cdd1d79e52cbcc5a972762c60d057 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-03-05PROX: [WIP] Added scale up TCs.Mytnyk, Volodymyr10-0/+810
These scale-up TCs replace PROX static TCs which will be removed by separate commit once those new TCs are merged. Change-Id: I892a81c4bfd199782fb561faccc11e70a49675ae Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-03-01vFW scale-up template.Mytnyk, Volodymyr7-0/+400
Added topology and traffic profile templates Added support for using JinJa2 templates in topology definition Added support for static pipeline configs for SampleVNFs JIRA: YARDSTICK-1043 Change-Id: Iab99fd5b5ad69ca32ee70b9fe47779387ad27e7f Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com> Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-28Merge "Addition of storage of extra counters for Grafana"Abhijit Sinha2-8/+18
2018-02-28Addition of storage of extra counters for GrafanaDanielMartinBuckley2-8/+18
JIRA: YARDSTICK-1036 This stores a number of extra counters in influxdb for Prox test cases. It also stores existing counters with a "succcess_" tag. Previously throughput where stored without success or failure indication. Also "Result_" counters are also stored. These can now be used by Grafana to graph output. Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-02-19Make segmentation_id configurable for tc_heat_rfc2544_ipv4_1rule_1flow_64B_trexMytnyk, Volodymyr1-0/+7
Updated vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml TC to be able to configure segmentation_id from commmand line. E.g.: yardstick -d task start --task-args='{"provider": "sriov", \ "segmentation_id": 100}' ... JIRA: YARDSTICK-1004 Change-Id: I53daae3468de2a1f523bd96817143a5f809238a2 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-15Merge "Update heat RFC2544 based TC to support SRIOV VF ports."Emma Foley1-0/+11
2018-02-14BugFix: Fix to pod context filenameXavier Simonart1-1/+1
The "context:file" of tc_prox_baremetal_lw_aftr has an incorrect path, compaired to all other prox test cases. Change-Id: Id24e74905f36bc84fdf93d1a2966211ecad55c8b Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-02-14Update heat RFC2544 based TC to support SRIOV VF ports.Mytnyk, Volodymyr1-0/+11
Updated vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml TC to be able to run it in heat context with SRIOV VF ports configured in OpenStack. E.g.: yardstick task start --task-args='{"provider": "sriov"}' ... yardstick task start --task-args='{"provider": "sriov"}\ physical_networks: ["physnet1", "physnet2"]}' ... Console log: http://paste.openstack.org/show/666931/ Result output: http://paste.openstack.org/show/666930/ JIRA: YARDSTICK-1004 Change-Id: If0dabd0791e4e295782fee0f3de1536474218876 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-02-08Prox vnf descriptor cleanupAbhijit Sinha3-6/+6
JIRA: YARDSTICK-1003 - There are redundant files for Prox vnf descriptors tg and vnf for 1, 2 and 4 port set-up. - We can use one vnf descriptor file per prox tg and prox vnf, reducing the number of redundant files. - Tested on Prox BM L2fwd 2 and 4 port test case. Change-Id: I4c61fd11725121f19392443460ac2ad39c934e2d Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-02-01Merge "Adding new vFirewall Test cases based on Concurrency, Connections per ↵Ross Brattain59-0/+2980
second, Throughput and Transactions per second for various http locator image sizes including 1b, 4k, 64k, 256k, 1024k"
2018-01-30Add sample OpenStack/SRIOV RFC2544 based TCMytnyk, Volodymyr1-0/+88
Add sample OpenStack/SRIOV RFC2544 based test case which can be run using external Trex. Console log: http://paste.openstack.org/show/658002/ Result output: http://paste.openstack.org/show/658004/ JIRA: YARDSTICK-967 Change-Id: Id0e2d6d47f459c7e6a3370735bab74f7ce502b24 Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-01-23Cleanup of redundant files from Prox directoryAbhijit Sinha15-631/+0
JIRA: YARDSTICK-965 Removed the redundant files and directory from Prox test folder. Change-Id: I6167f0a4ccdd581153dad3ec9f5eaaf2619aacbd Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-01-02Merge "Adding vFW RFC2544 and ixload test cases with various packet sizes"Ross Brattain11-0/+714
2017-12-16samples: Add generic L3 forwarder testsDino Madarang61-0/+6865
A generic throughput test case that can be used as a stub code for a Linux-based VNF configured as an L3 forwarder. Supported context: * Standalone OVSDPDK and SRIOV * Baremetal Code changes: * Allow pmd-cpu-mask and lcore mask for OVS DPDK * router_vnf.py - configures interface IP addresses and static arp entries using ip command * NFVi KPIs * Allow cputune tag for standalone context to be able to PIN on NUMA 1 cpus SRIOV Test cases: * RFC2544 Ethernet framesizes, 128K Flows * 2,4 and 6 ports * 2 and 3 vcpus per port * OVSDPDK Test cases: * RFC2544 Ethernet framesizes, 128K Flows * 2 and 4 ports * 2 vcpus per port * 2 PMD threads per port TODO: * Documentation * Add 6 ports tests References: * router_vnf.py is based on sample_vnf.py * tc_*.yaml files are based on acl/vfw test case files Added unitests Added get_stats to parse ip -s link Change-Id: Id1b969d5420dfcab7c1e695acbd2cd1655747efe Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com> Signed-off-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Reviewed-by: Alain Jebara <alain.jebara@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Emma Foley <emma.l.foley@intel.com> Reviewed-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> Reviewed-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-12-11Adding vFW RFC2544 and ixload test cases with various packet sizesPhani Kiran Thaticharla11-0/+714
Changed private to uplink and public to downlink Change-Id: Id9273d9489f58bd45b60a00fc9e5bcbe9e136c84 Signed-off-by: Phani Kiran Thaticharla <phani.kiran.thaticharla@intel.com> Reviewed-by: Oscar Medina-Duran <oscar.medina-duran@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> 
2017-12-04Adding new vFirewall Test cases based on Concurrency, Connections per ↵Phani Kiran Thaticharla59-0/+2980
second, Throughput and Transactions per second for various http locator image sizes including 1b, 4k, 64k, 256k, 1024k Change-Id: I253d1fa20a0324bc9efeaa4da1a24560e644734c Signed-off-by: Phani Kiran Thaticharla <phani.kiran.thaticharla@intel.com> Reviewed-by: Oscar Medina-Duran <oscar.medina-duran@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ross Brattain <ross.b.brattain@intel.com> 
2017-11-17Merge "Add vfw ixload testcase for heat"Ross Brattain4-1/+269
2017-11-17Merge "NSB: update vfw tc_heat_external tests"Ross Brattain2-11/+107
2017-11-14NSB Prox BM test case fixes for scale upAbhijit Sinha28-337/+99
YARDSTICK-839 In a scale-up test the VNF number can start from 0 to MAX (num_vnf-1) The NSB PROX BM test nodes are currently marked as: tg__0: trafficgen_1.yardstick vnf__0: vnf.yardstick They need to be changed to the below: tg__0: tg_0.yardstick vnf__0: vnf_0.yardstick Changes done are: - All BM Prox test cases have tg_0 and vnf_0 as default test nodes - The prox-baremetal-1/2/4.yaml sample pod file - Cleaned Up some unused Prox test/config files Change-Id: I819011bcb35eda62b17dd3e1035918918c582b13 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-11-10NSB: fix vpe_config licenseRoss Brattain1-27/+10
Use Apache 2.0 Change-Id: I199d09f04a5c84a25bd91dceba5e4ed1f93075f6 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-11-09Merge "NSB Prox LW_AFTR Test"Ross Brattain5-0/+66084
2017-11-07Fixed incorrect Copyright NoticeDanielMartinBuckley1-27/+10
Changed Copyright notice on tuples.lua from "Intel Copyright" to Apache 2.0 Change-Id: I85e6f9eb86c116d552f86cddf05b3b368b32f776 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-11-07NSB Prox LW_AFTR TestDanielMartinBuckley5-0/+66084
JIRA: YARDSTICK-802 Addition of PROX LW_AFTR basked on PROX/DATS v037 test_104_lw_aftr.py - This support BM and Openstack Heat - This supports 4 Ports ONLY - Grafana Dashboards included - Code Coverage / Unit testing Change-Id: If2170ab458bf687256d5f1a1e840a3b9d2788ef7 Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-10-24Add vfw ixload testcase for heatJennifer Li4-1/+269
- concurrency - connections/second - throughput Change-Id: Idb977462952fba2e6a9684e916dfeca810f1ee94 Signed-off-by: Jennifer Li <jennifer.li@intel.com>
2017-10-23NSB: update vfw tc_heat_external testsRoss Brattain2-11/+107
rename xe0, xe1 to uplink_0, downlink_0 enumerate tgs/vnfs starting from 0. add disable_dhcp Change-Id: Ia4f08b3ad5ab298192c249d04b10a6efbe4f210e Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-23BugFix: Fix to pod filename ext and prox pathAbhijit Sinha38-99/+99
As per defect: - the "context:" stanza of every tc_prox_baremetal*.yaml" file has an incorrect pathname for the config file - tc_prox_baremetal_binsearch.yaml and tc_prox_baremetal_ramp.yaml refer to "prox-baremetal.yml", which idoes not exist - incorrect prox bin path Resolution: - Unify the pod file name and path for all BM tests - Prox bin path changed to "/opt/nsb_bin/prox" Change-Id: I16b25189104ad5585ddc1c2c0dd71b3c4c2aecd3 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-10-19Merge "tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml updated"Ross Brattain1-16/+26
2017-10-18NSB: update vfw scale-out testcasesRoss Brattain7-33/+548
Change-Id: I6bd8a87f70954f288975e3e73e3cfbd36ae561dc Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-19Merge "add VNF scale-up template"Ross Brattain1-0/+98