Age | Commit message (Collapse) | Author | Files | Lines |
|
JIRA: YARDSTICK-1460
Cores running "mode=lat" must be properly configured with a correct
"lat pos" parameter. When this parameter is missing, PROX exits with
an error message.
When the "lat pos" parameter is missing for cores running "mode=gen",
latency values are not written into the packets.
Also fixed some typos, packet inline format, IP len and UDP len.
Change-Id: Ice06c5d74686c80f09bc60f568993dbf3165b338
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
(cherry picked from commit 7bc7bfb1b43e6329bbfc0ed7a7c5554ebcf10c2b)
|
|
JIRA: YARDSTICK-1037
Adjusted number of RX/TX descriptors to 2048, instead of default 256,
in order to cope with interrupts during which no packets are received
by the core, which results in the NIC dropping packets when it gets out
of available descriptors to buffer them.
Also adjusted mempool size, because more descriptors need more mbufs.
This change aligns L3FWD test case with other test cases, for which
number of RX/TX descriptors is already set to 2048.
Change-Id: I11378c078398aca799295b619bb3d14dbee04ca3
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
(cherry picked from commit 3adfba6bac0133bdbaa3db62e16f662e11d84fb8)
|
|
JIRA: YARDSTICK-1101
The traffic generated by the generator in bng-4 result in
non-symmetrical use of the cores on the SUT, as a whole
range of IP addresses is skipped.
Update cpe0 and cpe1 in gen files.
In addition, for the routing table (ipv4.lua) for the BNG
should be slighly different: while the BNG is a 4 ports
test, only 2 of the ports are used as outgoing routing
ports (the inet ports). Hence, the routing table should
only use the mac of those two ports. The bad configuration
(using 4 ports) result in an issue when BNG SUT and GEN
are connected through a switch, packets are sent by the
BNG SUT through the INET interfaces, but sometimes with
the MAC of the CPE interface...
Hence, packets are received on the wrong interface on the
Gen site (resulting in some interfaces, the CPE ones,
being overloaded)
Created ipv4_bng.lua and remove mac 0 and 2
Change-Id: I97019f0415d2f58d50ec855d04800eb705f41541
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: YARDSTICK-1101
Problem was incorrect generator and changed the traffic profile to allow
a tolerated loss of 5%.
ARP packets are not managed (just passed thru the system) therefor the
tolerated loss must be higehr than normal.
Change-Id: I03bd62b397a66b50961e810d033c6894d0b3e9a6
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: YARDSTICK-1211
Change-Id: I0899d470ca5a0ec7d42d36a9ff9c39cc7369310c
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
The Prox L2-fwd test case has a bad packet, which fails
the test case to run in OpenStack context as it's dropped
by the neutron.
This fix is needed to successfully run the L2fwd 2 and
4 port test cases in heat based test cases.
Change-Id: I86df31a6df1eaa6f968e46af159ac6a0157f402c
JIRA: YARDSTICK-1164
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
JIRA: YARDSTICK-1037
NSB PROX L3FWD was incorrect. The routing table (ipv4.lua) was incorrect.
Also a specific ipv4 for 2 port configuration is required.
Change-Id: I3a5fd1ea1d1ddf74cbdd6a5d9e7ced42d3c1d6e9
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
JIRA: YARDSTICK-1036
This stores a number of extra counters in influxdb for Prox test cases.
It also stores existing counters with a "succcess_" tag.
Previously throughput where stored without success or failure indication.
Also "Result_" counters are also stored.
These can now be used by Grafana to graph output.
Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
YARDSTICK-839
In a scale-up test the VNF number can start from
0 to MAX (num_vnf-1)
The NSB PROX BM test nodes are currently marked as:
tg__0: trafficgen_1.yardstick
vnf__0: vnf.yardstick
They need to be changed to the below:
tg__0: tg_0.yardstick
vnf__0: vnf_0.yardstick
Changes done are:
- All BM Prox test cases have tg_0 and vnf_0 as default
test nodes
- The prox-baremetal-1/2/4.yaml sample pod file
- Cleaned Up some unused Prox test/config files
Change-Id: I819011bcb35eda62b17dd3e1035918918c582b13
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
|
|
Changed Copyright notice on tuples.lua from "Intel Copyright" to Apache 2.0
Change-Id: I85e6f9eb86c116d552f86cddf05b3b368b32f776
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: YARDSTICK-802
Addition of PROX LW_AFTR basked on PROX/DATS v037 test_104_lw_aftr.py
- This support BM and Openstack Heat
- This supports 4 Ports ONLY
- Grafana Dashboards included
- Code Coverage / Unit testing
Change-Id: If2170ab458bf687256d5f1a1e840a3b9d2788ef7
Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
JIRA: YARDSTICK-802
Generator was incorrectly configured to generated traffic for p0, p1 (twice), and p3
Should be p0, p1, p2 and p3
Change-Id: Ib62a3c6523b1eda635b8c727c36e140fd480003e
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: YARDSTICK-802
Addition of Prox vPE test case
- The tests supports BM, Openstack Heat
- Supports 4 ports
- Grafana dashboards included
- Added support for parameters.lua
for prox additional files
- Unit tests for code coverage
Change-Id: I5cccb351dacba88a293ae4b8aba1f0a803d62e6d
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com>
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
JIRA: YARDSTICK-802
Updated the handle config for l3fwd 2 port test
The tx and rx descripters is removed as they
were not there in original DATS config.
The BM test was dropping packets beacuse of this.
Change-Id: I40d113267cbb3376a772b5a5aaecf74bea9d06fb
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
JIRA: YARDSTICK-802
Added Prox BNG and BNG-QoS Test
- The tests supports BM, Openstack Heat
- Supports 4 ports
- Test added for BNG traffic profile
- Fixed the Prox heat test cases with
proper upstream and downstream links
- Grafana Dashboard for BNG & BNG-QoS added
- Increased the test Duration to 300
TODO:
- Test does not Terminate correctly
Update:
Added new helper class for run_test: Genric, MPLS
and BNG tests.
Change-Id: Ib40811bedb45a3c3030643943f32679a4044e076
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: YARDSTICK-802
Addition of PROX L2FWD_Multiflow, ACL, Load Balancing plus
grafana dashboards
Supports 2 and 4 port Baremetal & Heat
Change-Id: I1f3990d5451de265ee3901302569c355ece3b146
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: YARDSTICK-802
Added Prox L3FWD and Packet buffering tests
- The tests supports BM and Openstack Heat
- L3FWD tests suports 2 and 4 ports
- Packet flow buffering test is a 1 port test
- Grafana Dashboards are added
TODO: Latency stats are missing in KPI collection
Need to invetigate that
Coverage if needed!
Change-Id: I216a170488d5578622cf8c3748a6277b380f016a
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
JIRA: YARDSTICK-802
Addition of Prox L2Fwd, MPLS test cases for BM and Heat.
updates:
Most of tg_prox and prox_vnf were absorbed into the base classes.
delete most of ProxDpdkVnfSetupEnvHelper, it is handled by DpdkVnfSetupEnvHelper baseclass
use standard _build_pipeline_kwargs methods
don't use terminate() use baseclass version
add new method kill_vnf that runs pkill -x
replace resource_helper.execute() with vnf_execture for dumping stats
In order to share code between tg_prox and vnf_prox
refactor to have tg_prox hold and wrap a ProxApproxVnf instance and call
methods on that class. Do this instead of multiple-inheritance.
Implement ProxApproxVnf.terminate() using prox socket command
based exit, (stop_all, quit, force_quit).
vnf_execute calls resource_helper.execute() which calls
socket methods on the sut object.
Since tg_prox wraps the VNF object, we can call
terminate on the VNF object and it should work correctly.
move prox config generation to parent process
we need to get core number info from config file
inside the TG processes, so we need to generate
the config in the parent process so the data is
copied to the child during the fork.
moved more config file methods to the setup_helper class.
we run force_quit after quit, so the socket should already be closed
this will trigger socket error, so add _ignore_errors option for
vnf_execute to ignore socket errors
Fixed the terminate issue. Added MPLS tests.
Added TG Stats in_packet/out_packet
Fixed compile (pep8) issues
Fixed MPLS TG port stats, in/out packets
Added Grafana dashboards for L2FWD and MPLS
Traffic profiles modified for tolerated loss and
precision as per DATS tests.
Added unit test case for Mpls
Single port test stats collection support.
Change-Id: Idd9493f597c668a3bb7d90e167e6a418546106e8
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
PROX was added to samplevnf project
https://git.opnfv.org/samplevnf/tree/VNFs/DPPD-PROX
JIRA: YARDSTICK-638
Change-Id: If9875b1130c6bed87deb8720b0d8b28ede9289d9
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|