summaryrefslogtreecommitdiffstats
path: root/samples/vnf_samples/nsut/prox/configs
AgeCommit message (Collapse)AuthorFilesLines
2018-10-29Fix latency for ACL test casesPatrice Buriez2-8/+18
JIRA: YARDSTICK-1460 Cores running "mode=lat" must be properly configured with a correct "lat pos" parameter. When this parameter is missing, PROX exits with an error message. When the "lat pos" parameter is missing for cores running "mode=gen", latency values are not written into the packets. Also fixed some typos, packet inline format, IP len and UDP len. Change-Id: Ice06c5d74686c80f09bc60f568993dbf3165b338 Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-10-02Fix NSB PROX L3FWD dropping packetsPatrice Buriez2-2/+14
JIRA: YARDSTICK-1037 Adjusted number of RX/TX descriptors to 2048, instead of default 256, in order to cope with interrupts during which no packets are received by the core, which results in the NIC dropping packets when it gets out of available descriptors to buffer them. Also adjusted mempool size, because more descriptors need more mbufs. This change aligns L3FWD test case with other test cases, for which number of RX/TX descriptors is already set to 2048. Change-Id: I11378c078398aca799295b619bb3d14dbee04ca3 Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-08-02NSB NFVi PROX BNG and vPE losing many packetsDanielMartinBuckley5-6/+105
JIRA: YARDSTICK-1101 The traffic generated by the generator in bng-4 result in non-symmetrical use of the cores on the SUT, as a whole range of IP addresses is skipped. Update cpe0 and cpe1 in gen files. In addition, for the routing table (ipv4.lua) for the BNG should be slighly different: while the BNG is a 4 ports test, only 2 of the ports are used as outgoing routing ports (the inet ports). Hence, the routing table should only use the mac of those two ports. The bad configuration (using 4 ports) result in an issue when BNG SUT and GEN are connected through a switch, packets are sent by the BNG SUT through the INET interfaces, but sometimes with the MAC of the CPE interface... Hence, packets are received on the wrong interface on the Gen site (resulting in some interfaces, the CPE ones, being overloaded) Created ipv4_bng.lua and remove mac 0 and 2 Change-Id: I97019f0415d2f58d50ec855d04800eb705f41541 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-27NSB NFVi PROX BNG losing many packetsDanielMartinBuckley4-16/+16
JIRA: YARDSTICK-1101 Problem was incorrect generator and changed the traffic profile to allow a tolerated loss of 5%. ARP packets are not managed (just passed thru the system) therefor the tolerated loss must be higehr than normal. Change-Id: I03bd62b397a66b50961e810d033c6894d0b3e9a6 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-07Fix latency in l2 and l3 PROX generator config filesXavier Simonart4-20/+85
JIRA: YARDSTICK-1211 Change-Id: I0899d470ca5a0ec7d42d36a9ff9c39cc7369310c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-05-09Fix Prox L2fwd generator packetAbhijit Sinha2-12/+7
The Prox L2-fwd test case has a bad packet, which fails the test case to run in OpenStack context as it's dropped by the neutron. This fix is needed to successfully run the L2fwd 2 and 4 port test cases in heat based test cases. Change-Id: I86df31a6df1eaa6f968e46af159ac6a0157f402c JIRA: YARDSTICK-1164 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-03-15NSB PROX L3FWD Dropping packetsDanielMartinBuckley6-91/+197
JIRA: YARDSTICK-1037 NSB PROX L3FWD was incorrect. The routing table (ipv4.lua) was incorrect. Also a specific ipv4 for 2 port configuration is required. Change-Id: I3a5fd1ea1d1ddf74cbdd6a5d9e7ced42d3c1d6e9 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2018-02-28Addition of storage of extra counters for GrafanaDanielMartinBuckley2-8/+18
JIRA: YARDSTICK-1036 This stores a number of extra counters in influxdb for Prox test cases. It also stores existing counters with a "succcess_" tag. Previously throughput where stored without success or failure indication. Also "Result_" counters are also stored. These can now be used by Grafana to graph output. Change-Id: Ie5636c14ecbab1b53a988bdfbd47ddd1fcdbd695 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-11-14NSB Prox BM test case fixes for scale upAbhijit Sinha4-204/+46
YARDSTICK-839 In a scale-up test the VNF number can start from 0 to MAX (num_vnf-1) The NSB PROX BM test nodes are currently marked as: tg__0: trafficgen_1.yardstick vnf__0: vnf.yardstick They need to be changed to the below: tg__0: tg_0.yardstick vnf__0: vnf_0.yardstick Changes done are: - All BM Prox test cases have tg_0 and vnf_0 as default test nodes - The prox-baremetal-1/2/4.yaml sample pod file - Cleaned Up some unused Prox test/config files Change-Id: I819011bcb35eda62b17dd3e1035918918c582b13 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-11-09Merge "NSB Prox LW_AFTR Test"Ross Brattain3-0/+65934
2017-11-07Fixed incorrect Copyright NoticeDanielMartinBuckley1-27/+10
Changed Copyright notice on tuples.lua from "Intel Copyright" to Apache 2.0 Change-Id: I85e6f9eb86c116d552f86cddf05b3b368b32f776 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-11-07NSB Prox LW_AFTR TestDanielMartinBuckley3-0/+65934
JIRA: YARDSTICK-802 Addition of PROX LW_AFTR basked on PROX/DATS v037 test_104_lw_aftr.py - This support BM and Openstack Heat - This supports 4 Ports ONLY - Grafana Dashboards included - Code Coverage / Unit testing Change-Id: If2170ab458bf687256d5f1a1e840a3b9d2788ef7 Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-10-11Bug in NSB Prox ACL Test 4 PortDanielMartinBuckley1-1/+1
JIRA: YARDSTICK-802 Generator was incorrectly configured to generated traffic for p0, p1 (twice), and p3 Should be p0, p1, p2 and p3 Change-Id: Ib62a3c6523b1eda635b8c727c36e140fd480003e Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-10-06NSB Prox vPE TestAbhijit Sinha7-0/+4764
JIRA: YARDSTICK-802 Addition of Prox vPE test case - The tests supports BM, Openstack Heat - Supports 4 ports - Grafana dashboards included - Added support for parameters.lua for prox additional files - Unit tests for code coverage Change-Id: I5cccb351dacba88a293ae4b8aba1f0a803d62e6d Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Daniel MArtin Buckley <daniel.m.buckley@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-10-02Prox L3FWD 2-port test fixAbhijit Sinha1-5/+0
JIRA: YARDSTICK-802 Updated the handle config for l3fwd 2 port test The tx and rx descripters is removed as they were not there in original DATS config. The BM test was dropping packets beacuse of this. Change-Id: I40d113267cbb3376a772b5a5aaecf74bea9d06fb Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-09-28Addition of Prox NSB BNG and BNG-QoS testAbhijit Sinha6-0/+66380
JIRA: YARDSTICK-802 Added Prox BNG and BNG-QoS Test - The tests supports BM, Openstack Heat - Supports 4 ports - Test added for BNG traffic profile - Fixed the Prox heat test cases with proper upstream and downstream links - Grafana Dashboard for BNG & BNG-QoS added - Increased the test Duration to 300 TODO: - Test does not Terminate correctly Update: Added new helper class for run_test: Genric, MPLS and BNG tests. Change-Id: Ib40811bedb45a3c3030643943f32679a4044e076 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-09-20Addition of PROX NSB tests to yardstickDanielMartinBuckley11-72/+794
JIRA: YARDSTICK-802 Addition of PROX L2FWD_Multiflow, ACL, Load Balancing plus grafana dashboards Supports 2 and 4 port Baremetal & Heat Change-Id: I1f3990d5451de265ee3901302569c355ece3b146 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2017-09-06Addition of Prox NSB tests in yardstickAbhijit Sinha7-0/+532
JIRA: YARDSTICK-802 Added Prox L3FWD and Packet buffering tests - The tests supports BM and Openstack Heat - L3FWD tests suports 2 and 4 ports - Packet flow buffering test is a 1 port test - Grafana Dashboards are added TODO: Latency stats are missing in KPI collection Need to invetigate that Coverage if needed! Change-Id: I216a170488d5578622cf8c3748a6277b380f016a Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
2017-09-04Addition of Prox NSB changes in yardstickabhijitsinha12-0/+1030
JIRA: YARDSTICK-802 Addition of Prox L2Fwd, MPLS test cases for BM and Heat. updates: Most of tg_prox and prox_vnf were absorbed into the base classes. delete most of ProxDpdkVnfSetupEnvHelper, it is handled by DpdkVnfSetupEnvHelper baseclass use standard _build_pipeline_kwargs methods don't use terminate() use baseclass version add new method kill_vnf that runs pkill -x replace resource_helper.execute() with vnf_execture for dumping stats In order to share code between tg_prox and vnf_prox refactor to have tg_prox hold and wrap a ProxApproxVnf instance and call methods on that class. Do this instead of multiple-inheritance. Implement ProxApproxVnf.terminate() using prox socket command based exit, (stop_all, quit, force_quit). vnf_execute calls resource_helper.execute() which calls socket methods on the sut object. Since tg_prox wraps the VNF object, we can call terminate on the VNF object and it should work correctly. move prox config generation to parent process we need to get core number info from config file inside the TG processes, so we need to generate the config in the parent process so the data is copied to the child during the fork. moved more config file methods to the setup_helper class. we run force_quit after quit, so the socket should already be closed this will trigger socket error, so add _ignore_errors option for vnf_execute to ignore socket errors Fixed the terminate issue. Added MPLS tests. Added TG Stats in_packet/out_packet Fixed compile (pep8) issues Fixed MPLS TG port stats, in/out packets Added Grafana dashboards for L2FWD and MPLS Traffic profiles modified for tolerated loss and precision as per DATS tests. Added unit test case for Mpls Single port test stats collection support. Change-Id: Idd9493f597c668a3bb7d90e167e6a418546106e8 Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com> Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
2017-08-14PROX VNF and TGRoss Brattain9-0/+33529
PROX was added to samplevnf project https://git.opnfv.org/samplevnf/tree/VNFs/DPPD-PROX JIRA: YARDSTICK-638 Change-Id: If9875b1130c6bed87deb8720b0d8b28ede9289d9 Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>