Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove hardcoded rx queue value
JIRA: YARDSTICK-1493
Change-Id: Ia4944db21d94399c724bcabf4e0eae809518e7e9
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
(cherry picked from commit 68c127e17028e9961abcbd1c9a72fe2b878c427b)
|
|
|
|
|
|
|
|
|
|
JIRA: YARDSTICK-1298
Allow the test case file e.g. "tc_prox_baremetal_l2fwd-4.yaml"
settings to override the values in the traffic_profile file
e.g. "prox_binsearch.yaml"
This is done by adding the "traffic_config" section to the
"options" section in the "test case file".
See below :-
options:
interface_speed_gbps: 10
traffic_config:
tolerated_loss: 0.001
test_precision: 0.1
packet_sizes: [64]
duration: 30
lower_bound: 0.0
upper_bound: 100.0
vnf__0:
prox_path: /opt/nsb_bin/prox
prox_config: "configs/handle_l2fwd-4.cfg"
prox_args:
"-t": ""
tg__0:
prox_path: /opt/nsb_bin/prox
prox_config: "configs/gen_l2fwd-4.cfg"
prox_args:
"-e": ""
"-t": ""
Precedence of the traffic settings.
1. Values provided in the "traffic_config" section, inside
the "options" section, of the test case file
2. values provided in the "traffic_profile" section of the
traffic_profile file
Change-Id: I6b4e123e865c9dab548f9ad28647f95b53410e8f
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
(cherry picked from commit 383c438cda94a1004bc9552a5993fe3ff3e6da8f)
|
|
JIRA: YARDSTICK-1458
Removed excessive jitter by removing extra sleeps in start/stop/reset
ssh
Removed extra retries when bad data returned
Added a slep at end of test to give runner a chance to empty the queue
on shutdown
Added a timeout on port retry attempts
Change-Id: Ica60b11c7af242817a83c154157827581f60d16a
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
(cherry picked from commit b2fd601c33e3322ccc9e675242f091dba2eeb644)
|
|
|
|
* changes:
[docs] Update on Yardstick installation
[docs] Add conventions for writing unit tests.
[docs] Add developer guidelines for contribution
|
|
Add documentation to review the changes to original vEPC infrastructure
files to configure NSB test run in a specific test setup.
Add initial steps to prepare NSB to use Spirent Landslide for vEPC tests.
JIRA: YARDSTICK-1459
Change-Id: I3b937b1a21d6ec6851a92946e46c679385fdff9c
Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
(cherry picked from commit dc55a775f7aa62be7ed17cc33aa1b0bac54c081f)
|
|
JIRA: YARDSTICK-1349
The test case document will cover the following:
- test purpose
- test configuration
- pre-test conditions
- test sequence
- test verdict
Change-Id: I2841a7ff3d248bb3e4739579fad722dc02b5504f
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
(cherry picked from commit c8bde3b59031b352bf09302ae7644436860602d7)
|
|
JIRA: YARDSTICK-1492
Change-Id: I81c682d473ffe3d70ecbb42cce40c2d16e608b41
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
|
|
* changes:
Update: Trex KPI not collected no rabbitmq user
Trex KPI are not collected due to rabbitmq user
|
|
|
|
Update of review #63707: missed yardstick password hash.
This must be set on top of changes on review.
JIRA: YARDSTICK-1479
Change-Id: Ia8783de81ad91ea7421c6bbff87a30c59db2d44c
Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
|
|
Changed the way rabbitmq-server user is created. Fix is needed to
collect KPIs from Trex.
JIRA: YARDSTICK-1479
Change-Id: I6142109563fcdb27e0ec554dd08567a1a43237e7
(cherry picked from commit d06e6da19db545dfcc6fdfdc706b9cccdb75c498)
formerly: I54369535fdb7af6af76de30f758227736f83db78
Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
|
|
metrics." into stable/gambia
|
|
stable/gambia
|
|
This causes the docker-build jobs to fail in the CI.
This reverts commit ce809669d3051524508edf5a3d69e83dde8a9080.
Change-Id: Iea66bc92eaee39c5b7427ea55c190f8c0dbf5ad4
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
The dashboard will highlight the Network metrics captured from Spirent landslide traffic generator.
JIRA: YARDSTICK-1350
Change-Id: I47920446181355a97e875fd82afd633b336c8da6
Signed-off-by: Carey, Alan <alan.carey@intel.com>
(cherry picked from commit 5bf76a7a2ead6e8c3a0d8bc05c7ec89d9faaa5a5)
|
|
|
|
IP mask is set depending on the IP range provided by the user in the
traffic profile. In case of single IP in range, IPV4LENGTH value is
used as mask should cover all address bits.
JIRA: YARDSTICK-1478
Change-Id: I5ad40d1f3def52ebcda4400b708b71faf11e12ab
Signed-off-by: Serhiy Pshyk <serhiyx.pshyk@intel.com>
|
|
|
|
|
|
|
|
|
|
Added new RFC2544 iteration status field into the
testcase result to be able to exctract the best
RX/TX throughput value from each iteration.
The field equal "Success" if the trhoughput value is in the
given drop percentage range and "Failure" otherwise.
JIRA: YARDSTICK-1389
Change-Id: I2fb2ef036b63a0e7bbf3d6c6568d3bdffa488e1f
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
(cherry picked from commit 0ff5b131fa3f93f8d47b46c2f13661c5b88d37a1)
|
|
Added the PROX L3FWD Grafana dashboard with NFVi metrics
collected from barometer collectd container.
The dashboard has template field for HOST/SUT name
to get the collectd metrics from that SUT.
JIRA: YARDSTICK-1412
Update:
- Added table and graphs for TG NFVi metrics
- Added TG and SUT templates as IP address
- Added IPC(instruction per cycles) metric
Change-Id: I1f8971f551df27ad6a16241693527285610fc82d
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
(cherry picked from commit e63084495f47a9f5b5b61b23529792d6898841bb)
|
|
|
|
No sample testcase for prox OvS-DPDK standalone.
JIRA: YARDSTICK-1475
Change-Id: Ide65444d08d6c90e7e98d59b7d1f4cba8ca7397f
Signed-off-by: Carey, Alan <alan.carey@intel.com>
(cherry picked from commit b0e92a357658f4ece21e356653e8eb52d7ab8d98)
|
|
|
|
|
|
|
|
Removing the "keyfile" from the pod file to align with other
pod files for 1 and 4 port. The file when used as such currently
gives an error. This change will fix that.
JIRA:YARDSTICK-1477
Change-Id: Ibfa9387d068a0098ea0eb0b31ad96108d0602abc
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
(cherry picked from commit 31eac948bba5cf442981fdc7b1392992aaef1f15)
|
|
JIRA: YARDSTICK-1460
Cores running "mode=lat" must be properly configured with a correct
"lat pos" parameter. When this parameter is missing, PROX exits with
an error message.
When the "lat pos" parameter is missing for cores running "mode=gen",
latency values are not written into the packets.
Also fixed some typos, packet inline format, IP len and UDP len.
Change-Id: Ice06c5d74686c80f09bc60f568993dbf3165b338
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
(cherry picked from commit 7bc7bfb1b43e6329bbfc0ed7a7c5554ebcf10c2b)
|
|
Add some new terms (OpenStack, Docker, PROX).
JIRA: YARDSTICK-1335
Change-Id: I948957cf7b1540f7a027ab9da2d829e5e05c87c8
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
(cherry picked from commit 78b5a19e3071cbc080eeae0bdf22f5ab80c03180)
|
|
|
|
Added details how to install Yardstick using install.yaml.
Updated:
- 04-installation.rst
- 13-nsb-installation.rst
JIRA: YARDSTICK-1335
Change-Id: I526c328f1b197833a2cf496cfef15ba89c11fab1
Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
|
|
Added details of conventions used when writing unit tests.
JIRA: YARDSTICK-1335
Change-Id: I7bb141126968c88c8a2d7e0dce4f33ed6f79cee4
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
A new section was added to the devguide, stating
expectations for code contributions.
* What to include in a change
* Code style guidelines
* How to run tests
JIRA: YARDSTICK-1335
Change-Id: Idfe7790042a3a3fe6cd8763374b10f2268bd63cd
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
|
|
Add option parameters to TC074 to allow the user to specify
volume type, volume count, availability zone, stack name,
and subnet cidr.
JIRA:YARDSTICK-1294
Change-Id: I161f44b5f2c7e70fcfb80a3b916efc34bd06824c
Signed-off-by: Ameed Ashour <Ameed.Ashour.Ext@nokia.com>
(cherry picked from commit 43c28852a9c9abfe7fc66fca0dcc703b468db0cf)
|
|
On some platform, setting n_rxq option on port separately
does not work well and causes issues like port link down,
so changed the logic to set n_rxq DPDK port option during
adding the port to the bridge which help to resolve
the problem.
JIRA: YARDSTICK-1463
Change-Id: Icdb064153a38afd53b835de8742e6fcef08f66bb
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
(cherry picked from commit adcc29e56130f0f047b99528ce72b6f149643da7)
|
|
JIRA: YARDSTICK-1462
Change-Id: I001a173fc728be6e88f5ae6d38c64b740e536ff2
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
(cherry picked from commit ad63af7f42d07cffde73c32727f170973ce5ba46)
|
|
Add automatic update of traffic profile items library name update, as well
as update of session profile Dmf library name, to avoid the need of user
changing it in template files.
Update affected unit tests.
JIRA: YARDSTICK-1474
Change-Id: I18cc8ca99a47da862753329c87d1a560a97f76fa
Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
(cherry picked from commit 1fd3806d6a6bac19f3173da4d6cb94cef81fd7f5)
|
|
Implement code to support traffic_duration field in test case options.
This updates the 'duration' in Landslide session profile.
traffic_duration should always be much less than runner duration/timeout.
JIRA: YARDSTICK-1427
Change-Id: I51094bade683ca8758136ccb619e8894a2ecef72
Signed-off-by: Orest Voznyy <orestx.voznyy@intel.com>
(cherry picked from commit ae2ceba66519555749c67eefe2170ea716a1411b)
|
|
Changed the way rabbitmq-server user is created. Fix is needed to
collect KPIs from Trex.
JIRA: YARDSTICK-1479
Change-Id: I54369535fdb7af6af76de30f758227736f83db78
Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
(cherry picked from commit d06e6da19db545dfcc6fdfdc706b9cccdb75c498)
|
|
The regex is not compatible with pip version 18.
JIRA: INFRA-310
Change-Id: I6eaf1e3fac183f85c277934929e9065efa88d877
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
(cherry picked from commit a4084d27de22c64ecb690369c7bed49175703adf)
|
|
JIRA: YARDSTICK-1464
Change-Id: Ibbced9e0e04e077ec5c23fc15e97308dd11b7004
Signed-off-by: Serhiy Pshyk <serhiyx.pshyk@intel.com>
(cherry picked from commit 81ed5cdea4c36d45c6463523c6a0bc38495e544a)
|
|
|
|
|