| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
TODO: Reorganize documentation into properly named subfolders
TODO: Add logos to documentation (see index.rst for example)
Note you can see the results of this change via a link in the gerrit
comments below
NOTE: The merge job for your project has not been enabled, this code
will not go to the artifacts page upon a merge. you can merge it and
work on it in your own time, please contact me to enable the merge
(the merge job will make this documentation avaliable to the public on
artifacts.opnfv.org)
JIRA:RELENG-15
Change-Id: I8fd519393416e2ac2b3ada6fe0670aa4d038fc87
Signed-off-by: Aric Gardner <agardner@linuxfoundation.org>
|
|
Logging level should be specified using a command line flag -v or -d
when running yardstick, rather than hardcoded into source code. If the
message is to be displayed whenever yardstick is executed regardless
of the verbosity level, then the message should be logged to warning
or error levels, instead of debug.
JIRA: YARDSTICK-95
Change-Id: Idc9b81b583f4999bfbc57893f0ab3c3675c70f71
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
|
|
|
|
Workaround to prevent apt-get from using ipv6 addresses on LF POD.
JIRA: -
Change-Id: I58e31a01f03271cb716a76e5abed18d67d87a0a7
Signed-off-by: Jo¶rgen Karlsson <jorgen.w.karlsson@ericsson.com>
|
|
since coverage report based on master, coverage configure file should be merged to master at first
then coverage shell script will be committed after coverage conf
As first part, this patch only include two configure files and one init file :
.testr.conf , .coveragerc, __init__.py
Change-Id: I073e65b641144e4878595f073cd37081e4a4940b
JIRA:YARDSTICK-108
Signed-off-by: kubi <jean.gaoliang@huawei.com>
|
|
This is a workaround for building on CentOS.
CentOS don't have nbd so guestfstool is used to mount the
ubuntu image.
The http sources has been changed to ftp as the apt-get
tool inside the Ubuntu image dont work well with http
sources when running on CentOS.
Change-Id: I23679ff034ea76782dcc73d3283cb70ebace5ee8
JIRA: YARDSTICK-136
Signed-off-by: Jo¶rgen Karlsson <jorgen.w.karlsson@ericsson.com>
|
|
Example invocation:
$ export EXTERNAL_NETWORK=net04_ext
$ yardstick task start samples/ping.yaml
The default external network is "net04_ext"
external_net should not be possible set in yaml anymore.
JIRA: YARDSTICK-54
Change-Id: I8c7b2850801f312c6878e9a363b06cdc8ade09bf
Signed-off-by: QiLiang <liangqi1@huawei.com>
|
|
Sample output from the iperf3 is read from a pre-generated json file.
Change-Id: I6e04c6bd2e61b841c7e5673cfa78aeb17220a5f9
JIRA:-
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Add support in task file for the template syntax based on Jinja2.
JIRA:YARDSTICK-101
Change-Id: I24be133ba590510612d97a1fce6c024e6edb57e4
Signed-off-by: kubi <jean.gaoliang@huawei.com>
|
|
Add unit tests for logical model (model.py). This test suite does not
include tests for unfinished functionality - some parts of methods or
in some cases whole methods with unresolved TODOs are not tested.
This test suite is not complete, for most methods only the default
case is tested.
JIRA:-
Change-Id: I0984fb3655513f5ad67dcc7436461990da9296e7
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
This script enables to run multiple yardstick tasks in the yardstick
daily build without having to change the Jenkins job in the releng
repository.
This script should be executed from the main yardstick directory just
as run_tests.sh.
If at least one of the tasks listed returns a non-zero value then the
script continues executing, but in the end will exit with value 1.
JIRA: YARDSTICK-106
Change-Id: I8a6bb7e6c03ec551709ff66a45aad7257fb36e92
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
FIO storage performance varification support variable iodepth.
JIRA: YARDSTICK-119
Change-Id: Ib6af55c5fbcaa7727a7541b13053b5e4ce8d3203
Signed-off-by: houjingwen <houjingwen@huawei.com>
|
|
|
|
Unit test case for utility function itersubclasses is from rally.
A separate test case is created for each utility function.
Running of unittest from run_test.sh is NOT enabled.
Change-Id: I47a8020a05b19eb3f1edcebde1042c732bff5561
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
This patch is the initial implementation of DB result storage.
Having implemented a dispathcer which enable user select different ways
to store test results according to different requirements. This patch
can support not only local file storage, but also remote storage by
using http request(it will call common-db-api when available). Later,
local DB sotrage will be supported.
This patch is raw and simple, which is implemented with reference to
openstack ceilometer.
Any comment is welcome.
JIRA: YARDSTICK-61
Change-Id: Icaf8369edfab5d05f0819eb02d5b05dc8a04d69d
Signed-off-by: QiLiang <liangqi1@huawei.com>
|
|
Unit test file for template_format.py originates from
python-heatclient. Dependency for testscenarios module is removed and
testtools module is replaced with python native unittest module.
Running of unittest from run_test.sh is NOT enabled.
JIRA: -
Change-Id: I14e77ce04763b503cc757fe7098d2c704a7ae22c
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Unit test file for ssh.py originates from rally. It is modified to
be consistent with the ssh module used in yardstick - some tests for
missing functionality are removed and naming convention is changed
(ssh in yardstick vs sshutils in rally).
Running of unittest from run_test.sh is NOT enabled.
JIRA:-
Change-Id: I3ea554e3fbe6f1f906778f88ddd859424331c8df
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
|
|
|
|
Add paragraph for installing required dependencies to README.rst to
make setting up a new development environment easier and documented.
Moved existing command to install virtualenv to the new paragraph to
maintain integrity.
JIRA:-
Change-Id: I356611fbb92a5d2a556675e779a11308c22a8ceb
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
A Iteration runner is roughly the same as a Duration runner but runs
for a configurable number of times/iterations instead of time.
Basically just the termination condition is different.
modify the unit and default value of iteration.
rename iteration to iterations
JIRA:YARDSTICK-49
Change-Id: I67f4014dc3cf923cd31cc2e990e2f7219bce40fe
Signed-off-by: kubi <jean.gaoliang@huawei.com>
|
|
Command line tool yardstick-plot is to be used to visualize results
gathered from yardstick framework's output file. Currently supports
plotting graphs from ping, pktgen, iperf3 and fio tests.
Yardstick-plot takes two arguments - input file and output folder
and both of them have defaults to fall to if left unspecified.
Supports having multiple different scenario types in an input file,
while assuming that all results from the same scenario type belong
to one graph. Thus, results plotted from a single scenario type
with different parameters are currently non-informative.
yardstick-plot is declared as an extra for yardstick in setup.py as
it is not required for all use cases of the yardstick framework.
It can be installed for example using command:
$ pip install -e .[plot]
from the folder where setup.py is located.
Example invocation: yardstick-plot -i /tmp/yardstick.out -o /tmp/plots/
JIRA: YARDSTICK-65
Change-Id: Ic436ca360ba2496aa829ca817b1d9d5f3c944c6c
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Supports using perf software event counters. No hardware events are
currently supported. It is possible to add some load to the system
using the load parameter, otherwise the system will sleep while the
measurements are collected.
It is possible to configure SLA for any event measured.
Change-Id: Ic413d940093aadd10dc32888ea416aa94316a6fe
JIRA: YARDSTICK-51
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
|
|
Supports measuring memory read latency using Lmbench.
SLA can be verified for maximum latency time in nanoseconds
compared against results from every measurement taken.
Change-Id: Ia187e68eaa03341ba14b6e9eb986afb1d00dd0f6
JIRA: YARDSTICK-89
JIRA: YARDSTICK-92
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
By default output from run_tests is verbose. This enables seeing the
error messages in Jenkins' console output when a job fails.
Output can alternatively be captured to a log file using an -f flag.
Example invocation for logging output to a file: $ ./run_tests.sh -f
Running of unittest from run_test.sh is enabled.
JIRA: YARDSTICK-102
YARDSTICK-104
Change-Id: I3be7d7873cf75247980d97c3fbdf0bfdbabe53ad
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Sequence and Arithmetic runners have an extra colon
in their 'sargs:' output. This commit removes that
unnecessary and incorrect character.
Change-Id: I9bb1af5397812318e94e3bd71c680605c4917c1a
JIRA: YARDSTICK-98
Signed-off-by: raindirve <seanw@kth.se>
|
|
|
|
JIRA: YARDSTICK-96
Change-Id: Ic7e918b6d287725e2451da93aa8a36ec2b09ca0a
Signed-off-by: QiLiang <liangqi1@huawei.com>
|
|
|
|
since value will overstep the stop value under some condition
JIRA:YARDSTICK-97
Change-Id: I11656206fc9b576283d243a3be249276dba03759
Signed-off-by: kubi <jean.gaoliang@huawei.com>
|
|
Sample output from fio_benchmark.bash is read from a string.
Running of unittest from run_test.sh is NOT enabled.
JIRA:-
Change-Id: If4f4d00cf215fa1d332260817a8a3e702e72fd7e
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Sample output from pktgen_benchmark.bash is read from a string.
Running of unittest from run_test.sh is NOT enabled.
JIRA:-
Change-Id: I51391df0726ed9e7486775d2cdd5583b305ea8e0
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Example invocation in main.py is in accordance with change 40f49a4
JIRA:-
Change-Id: Id3b07e83db768c6d43f6a5bddc954448c9f1e6c4
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
|
|
Template states mandatory information for each
test case to be delivered by Yardstick Project.
JIRA: YARDSTICK-2
Change-Id: I16b98acc6689e24f8e6a85c356ee1b8991bd5276
Signed-off-by: Ana C <ana.cunha@ericsson.com>
|
|
The output of scenarios will be appended to the yardstick.out file.
JIRA: YARDSTICK-45
Change-Id: I185c6d2a8a534c8bb2b731bb84c47bdf4bad4427
Signed-off-by: panghao1 <shamrock.pang@huawei.com>
|
|
Make sure log level set correctly.
JIRA: YARDSTICK-57
Change-Id: Icc0e100432ce773f70ee0ac9b18471f89849d990
Signed-off-by: kubi <jean.gaoliang@huawei.com>
|
|
JIRA: YARDSTICK-58
Change-Id: I6d930f8c35eb42a8e5f0f011dfa836496d68ff98
Signed-off-by: QiLiang <liangqi1@huawei.com>
|
|
By request, changed the misleading 'client' and 'server' designations
under context:servers in the sample files, to avoid misunderstandings
and convey the message that their names are irrelevant.
Uses the Greek pantheon as established in
https://gerrit.opnfv.org/gerrit/#/c/946/
JIRA: -
Change-Id: I28438340f7cbad679c2ffd4d147fbf0c7d2a379d
Signed-off-by: raindirve <seanw@kth.se>
|
|
1. Fixes runner failing because of key error in context 'target_ipaddr'.
2. Fixes type error when no options are specified in the task file
(for example as in the current iperf3 sample task file).
JIRA:-
Change-Id: I21a1dea4571c14dbb1f9862dcf70b078837ebf07
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
pre-start and post-stop intention is to be used to gather
information about the target system.
single-shot and periodic-action intention is to perform
actions on the infrastructure or cloud resources. For example
server live migration or network interface down.
Example of what can be added in the runner section:
pre-start-action:
command: "heat stack-show demo"
periodic-action:
interval: 10
command: "ifconfig vboxnet1"
single-shot-action:
after: 30
command: "nova show goofy.demo"
post-stop-action:
command: "nova list"
pre-start and post-stop data are added into the output file.
periodic and single-shot are not because that would interfere with
the actual sampled data. Besides the intention is not to log statistics
but do things with the infrastructure such as server live migration.
TODO: add sections to the output file, something like pre, data & post
JIRA: YARDSTICK-46
Change-Id: Ia059813fb74733f86368aea9c7a20e5afb71d228
Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
|
|
A simple test case is added that will test writes to ephemeral storage.
See samples/fio.yaml
The Fio test type can also be used to test block storage, just modify
the "filename" argument.
JIRA: YARDSTICK-34
Change-Id: I1758d2999f8a5fdd44726e1dfc3e9769ea39dad6
Signed-off-by: houjingwen <houjingwen@huawei.com>
|
|
The "sequence" runner will use an input value of the test for every
run from a pre-defined list from the task file.
Example runner section of the task file:
type: Sequence
interval: 1
scenario_option_name: packetsize
sequence:
- 100
- 150
- 200
JIRA: YARDSTICK-47
Change-Id: I5bde9b78cb356499c338ef3da26ac1783670887d
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
In the task file we have cross referencing between servers (VMs).
This is done with DNS style naming. However servers created in the
cloud does not get the same type of name.
This patch aligns the cloud resource name with the one in the task file.
This prepares for running external scripts that takes server names as
input (see YARDSTICK-46)
The "instances" support in model.Server is not really working and
should be removed or fixed. No sample task file is using this
feature for now.
Change-Id: If2f752a82d224f07e4b5ee2361c1ff2454f39462
JIRA: -
Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
|
|
JIRA: YARDSTICK-48
Step duration for Pktgen can be configured for each step.
Change-Id: Ida6e2f7d8a1c7d86fb2e65389b5b56d5958d3ad9
Signed-off-by: Kristian Hunt <kristian.hunt@gmail.com>
|
|
Example usage and output:
$ yardstick runner list
+------------------------------------------------------------------------------+
| Type | Description
+------------------------------------------------------------------------------+
| Duration | Run a scenario for a certain amount of time
| Arithmetic | Run a scenario arithmetically stepping an input value
| Constant | Run a scenario a certain number of times
+------------------------------------------------------------------------------+
$ yardstick runner show Duration
Run a scenario for a certain amount of time
If the scenario ends before the time has elapsed, it will be started again.
Parameters
duration - amount of time the scenario will be run for
type: int
unit: seconds
default: 1 sec
interval - time to wait between each scenario invocation
type: int
unit: seconds
default: 1 sec
$ yardstick scenario list
+------------------------------------------------------------------------------+
| Type | Description
+------------------------------------------------------------------------------+
| Iperf3 | Execute iperf3 between two hosts
| Pktgen | Execute pktgen between two hosts
| Ping | Execute ping between two hosts
+------------------------------------------------------------------------------+
$ yardstick scenario show Iperf3
Execute iperf3 between two hosts
By default TCP is used but UDP can also be configured.
For more info see http://software.es.net/iperf
Parameters
bytes - number of bytes to transmit
only valid with a non duration runner, mutually exclusive with blockcount
type: int
unit: bytes
default: 56
udp - use UDP rather than TCP
type: bool
unit: na
default: false
nodelay - set TCP no delay, disabling Nagle's Algorithm
type: bool
unit: na
default: false
blockcount - number of blocks (packets) to transmit,
only valid with a non duration runner, mutually exclusive with bytes
type: int
unit: bytes
default: -
JIRA: -
Change-Id: If218e129a30af7e20792190003c214677e732252
Signed-off-by: Hans Feldt <hans.feldt@ericsson.com>
|
|
New command line handler with pluggable classes.
Task subcommand added.
To run a scenario: yardstick -d task start samples/ping.yaml
$ yardstick -h
usage: yardstick [-h] [-V] [-d] [-v] {task} ...
Command-line interface to yardstick
optional arguments:
-h, --help show this help message and exit
-V, --version display version
-d, --debug increase output verbosity to debug
-v, --verbose increase output verbosity to info
subcommands:
{task}
$ yardstick task -h
usage: yardstick task [-h] {start} ...
Task commands.
Set of commands to manage benchmark tasks.
optional arguments:
-h, --help show this help message and exit
subcommands:
{start}
$ yardstick task start -h
usage: yardstick task start [-h] [--keep-deploy] [--parse-only]
[--output-file OUTPUT_FILE]
taskfile
Start a benchmark scenario.
positional arguments:
taskfile path to taskfile
optional arguments:
-h, --help show this help message and exit
--keep-deploy keep context deployed in cloud
--parse-only parse the benchmark config file and exit
--output-file OUTPUT_FILE
file where output is stored, default
/tmp/yardstick.out
JIRA :-
Signed-off-by: Jo¶rgen Karlsson <jorgen.w.karlsson@ericsson.com>
Change-Id: If0672594efa4c94c94ebb73f0bc97ecfe3e00c62
|
Hou Jingwen
Aric Gardner
Kristian Hunt
Jo¶rgen Karlsson
kubi
QiLiang
Hans Feldt
raindirve
Ana C
panghao1