Age | Commit message (Collapse) | Author | Files | Lines |
|
RFC2544 tests should include the following frame sizes:
9.1 Frame sizes to be used on Ethernet
64, 128, 256, 512, 1024, 1280, 1518
Change-Id: I6ab9cccf2bb3b2678f50da157a9a49c0d9564cbd
Signed-off-by: Dino Simeon Madarang <dinox.madarang@intel.com>
Reviewed-by: Alain Jebara <alain.jebara@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ross Brattain <ross.b.brattain@intel.com>
Reviewed-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
(cherry picked from commit 7046a9139a60e0bc3e65f5dc6dcb8e6999528136)
|
|
From some reason Heat/Neutron is now creating
interfaces such that xe0 and xe1 are swapped.
xe0 fa:16:3e:38:c7:66 0000:00:05.0
xe1 fa:16:3e:2f:f3:e2 0000:00:03.0
this causes the DPDK port numbering to be swapped.
xe0 is DPDK port 1 because it has higher PCI address
xe1 is DPDK port 0 because it has lower PCI address.
The VNF is configured correctly because it uses DPDK port numbers,
whereas TRex was using interface list ordering.
Modify trex_cfg.yaml to use DPDK port ordering. This also
requires running generate_cfg() after setup() in instantiate()
+------------------------------------+-------------------+------------------------------+--------+
| Name | MAC Address | Fixed IP Addresses | Status |
+------------------------------------+-------------------+------------------------------+--------+
| vnf_0.yardstick-af5ccb47-xe0-port | fa:16:3e:66:a5:e4 | ip_address='10.1.0.7', | ACTIVE |
| vnf_0.yardstick-af5ccb47-mgmt-port | fa:16:3e:fa:98:fe | ip_address='10.0.1.10', | ACTIVE |
| tg_0.yardstick-af5ccb47-xe1-port | fa:16:3e:2f:f3:e2 | ip_address='10.1.1.9', | ACTIVE |
| vnf_0.yardstick-af5ccb47-xe1-port | fa:16:3e:f3:1d:f5 | ip_address='10.1.1.4', | ACTIVE |
| | fa:16:3e:e3:8c:65 | ip_address='10.0.1.1', | ACTIVE |
| | fa:16:3e:ff:d1:b7 | ip_address='11.191.14.110', | N/A |
| tg_0.yardstick-af5ccb47-xe0-port | fa:16:3e:38:c7:66 | ip_address='10.1.0.8', | ACTIVE |
| | fa:16:3e:ff:53:5f | ip_address='11.191.14.101', | DOWN |
| | fa:16:3e:23:5d:2c | ip_address='10.0.1.2', | ACTIVE |
| tg_0.yardstick-af5ccb47-mgmt-port | fa:16:3e:7a:df:4e | ip_address='10.0.1.5', | ACTIVE |
| | fa:16:3e:22:65:36 | ip_address='11.191.14.109', | N/A |
+------------------------------------+-------------------+------------------------------+--------+
/sys/devices/pci0000:00/0000:00:03.0/virtio0/net/ens3/address:fa:16:3e:2f:f3:e2
/sys/devices/pci0000:00/0000:00:05.0/virtio2/net/ens5/address:fa:16:3e:38:c7:66
Change-Id: Iaef2c7d9a5af7f45bd805a8ad6ee545ce0495cb1
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
(cherry picked from commit 7ed018cddf88ac1c5a92f71fa5e421e66d259bc0)
|
|
Removed the abs function which can potentially mask
negative dropped packets.
Dropped packets in Prox workload VNF = max((tx_packets - rx_packets), 0)
Change-Id: I510a351e899cdf9a1f366d632b9f0528b1d9dcce
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
(cherry picked from commit a27278dacaa54ae60cd3bdfa6e6145643f76fa02)
|
|
|
|
stable/euphrates
|
|
Change-Id: I3b79d33dba5cc559634122a135ff469f054214fc
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
(cherry picked from commit 255a77da00dd047ee0c5ab1e849cf7e6ce75ecf6)
|
|
|
|
The opnfv_os-odl-fdio_dvr-noha_daily.yaml test suite file is wrongly put in Yardstick root directory,
this patch moves this file to the 'test_suites' directory.
Change-Id: Ib3f75845c7af658dc6f96ac2de737cfbd1faf15a
Signed-off-by: JingLu5 <lvjing5@huawei.com>
(cherry picked from commit 14050ee3f720eb6aafaca256fc7bd982ac127cc7)
|
|
Change-Id: If6b70791213099d53c82993bd22ac9eed6000c32
Signed-off-by: JingLu5 <lvjing5@huawei.com>
(cherry picked from commit a4e465a23a41dfee5419085c43ed21aee3a0d97c)
|
|
|
|
Change-Id: Ie9cee3e0567e771cbf11a9802bd33a420cc1ee7a
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
(cherry picked from commit 041aeb7d3505e98af5b167a5ee05bb72c3c87a26)
|
|
Change-Id: Id7f55f7fcb2fec2866b76821595776908ac30c04
Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
(cherry picked from commit bdcae10b04debea07e4553aab6e4ce43011d5f62)
|
|
Change-Id: I6bd8a87f70954f288975e3e73e3cfbd36ae561dc
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
(cherry picked from commit 39ead7aee3610dddbdeae33a5776ae5b98dfabea)
|
|
Change-Id: I9d246828790467c2a57ba410826ee9751fff89c5
Signed-off-by: JingLu5 <lvjing5@huawei.com>
(cherry picked from commit 4712d72a570dc9e2799227d489ee41768881a06d)
|
|
* changes:
tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_correlated_scale_2: fix indent
Hamonization of the titles of the documents (Testing group)
scale-out testcase template
|
|
stable/euphrates
|
|
|
|
adjust worker_threads based on number of vcpus
Change-Id: Ie5444a64c15711a0e813905c69581f189432fe0b
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
(cherry picked from commit bc6c77102684f69bccdce8509723e00ef38c69cf)
|
|
Change-Id: I7e9d8074b5d956c864a0b3264926eee89e66dc35
Signed-off-by: Charlie Kang <charlie.kang@intel.com>
(cherry picked from commit baa6c60b3216a41978a136b9d32e054c52153935)
|
|
bad YAML indent
Change-Id: I6aaf53b9bbf6005b6be4c2d6c69cefd41949f8c6
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Change-Id: I8f4b6af898c9d3783f7b45471088a69e51c8baba
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Change-Id: I6065fb416a90544539316666aac92735ee84177a
Signed-off-by: Morgan Richomme <morgan.richomme@orange.com>
|
|
To fully enable IxLoad, after installing the IXIA client,
check /opt/ixia/ixload/<ver>/bin/ixloadpython and make sure
you can run this cmd inside the yardstick container. Usually
user is required to copy or link /opt/ixia/python/<ver>/bin/ixiapython
to /usr/bin/ixiapython<ver>.
Change-Id: I6bc633802ad6c70329581014ec89c75bb7f8d688
Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com>
|
|
use anonymous flavors
force num_vnfs to int
added provider network examples
we have to disable port security for provider networks
removed vld_id, not needed
adjust num_vfs to allocate two physnets per VNF.
fix for multiports
Change-Id: Ic4c8314dc07f6295b9559188989d81058bb48eb0
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
While creating the mirror for pmu event list generation, some of
the links would fail, throwing error. This fixes that.
Change-Id: I52e96b1a6eacb5a9611845e815ecff9052df168a
Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com>
|
|
Change-Id: Ie770ca69ebdc66589ed6ca5c25bfc9a75afb8938
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Dropped packets were tolerated. Now no longer tolerated (except 0.01%)
Change-Id: I69d4f1a84d82e03a091a61419fa05fea13176c1c
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
Change-Id: I7248d97a55974091daf20f0fba4b612101a0e4c5
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Change-Id: I8577231c2e78776cb30f7f7ded353a4fbc585aaa
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: If2e079966939b7faa33d2833d81caad0a3669036
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
- trex
- ixia
- ixia correlated
Change-Id: I7d1414227c27c2bb03454eac94592e07c434f070
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I3d1a491e4c0f0554a861d9bb24fbd0ac94835759
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: Iaf8b3e0aa3855443b0628573a1df98d177f27c76
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I1f457c9c24f2ca84dde61b64f58edaff8952670a
Signed-off-by: Edward MacGillivray <edward.s.macgillivray@intel.com>
|
|
As per defect:
the "VNF packets dropped" time series is negative - negative number of packets dropped
is not meaningful.
Solution:
Return a positive value.
Change-Id: I358006a691f2d6b5954333b9f7a745aba97ae44f
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
In trex, giving count beyond the allowed range causes trex client to
fail. Check the range and reset the count before starting the traffic
Change-Id: I58e54f47edb5f249087b8f7178b807ddfb13b03c
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: YARDSTICK-825
Change-Id: Ib2f8d0b88378c0dd0bd20ba38141a205fa7ae486
Signed-off-by: JingLu5 <lvjing5@huawei.com>
|
|
Change-Id: I4bb15a398819e54f7fb3e9eac17daa4059c03376
Signed-off-by: JingLu5 <lvjing5@huawei.com>
(cherry picked from commit a5d0491b47fd1bab27fa603353861ea8eaba8da5)
|
|
Change-Id: Idd60153e6097cbef6513942653429d2ec96a8c17
Signed-off-by: JingLu5 <lvjing5@huawei.com>
(cherry picked from commit b122091bcc2e780be3694cf0faa1b771994798f6)
|
|
Change-Id: Ieb8943a432a59375b7e68a708666ad4caa4affd2
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
move factory method from Collector to ResourceProfile
Change-Id: I1ddf3cffed7a3b2d45aa9cbffd3c0a5925c325d6
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
for none-ha test case, use host to be parameter
for ha test case, use attack_host as parameter
Change-Id: I053df00adab17814dd54584a1ae081548163dc68
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
(cherry picked from commit 18b2c357c3d281fbdf5261958ef60abb98915486)
|
|
JIRA: YARDSTICK-823
We need to create test sutie opnfv_os-nosdn-openbaton-ha_daily.yaml
to enable this scenario.
Change-Id: Ia800a9c74aaecf0d73e6f0fd559630b741ad2432
Signed-off-by: chenjiankun <chenjiankun1@huawei.com>
(cherry picked from commit 164d60cedff53c520e4c36a37cb1a02bf873f7fb)
|
|
Change-Id: I888a6029efaad8308de8df6b6787dd46af5f1c55
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
I'm not sure why we hardcoded config_file when
the CONF_FILE constant will work.
Change-Id: I45a1dc17ac2b185c659725f55462214acb74838d
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
switch from hardcoded path to dynamic path
based on bin_path
also enable proxy for install_collectd
add barometer settings for virt and ovs_stats
Change-Id: Id138aef548332a3e3fcb3963b746e7c9f10c0948
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|
|
Bumping collectd version to include pmu plugin enablement,
bounding pmu-tools and intel_cmt_cat to a commit-id
Change-Id: I666d52c5574cec0caebb07535332984fa77e5b65
Signed-off-by: Dhaval Patel <dhaval.r.patel@intel.com>
|
|
JIRA: YARDSTICK-802
Updating the Grafana dashboards with common data
format for all BM and Opensatck Prox tests and
adding minor improvements
- Correct the test description
- Re-run the tests and verify that all the
fields are graph correct
- Label the axes correctly.
eg: For Throughput added label "MPPS"
Change-Id: I62b471926fe3c4c8876b70053a92d06f4373e296
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
|
|
This patch is used to verify the parameters passed and
the flow of qemu_migrate_benchmark.bash script to handle
the bugs
Change-Id: Ifc1bfa7a91a2eed178b9dc984c222074f06e0599
Signed-off-by: Navya Bathula <navyax.bathula@intel.com>
|
|
Change-Id: I8674caa15c9fc32cfacb17f558da5fb31094877e
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
|