summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-06-27Merge "Fix NSB NfVi support for 25 and 40Gbps"Abhijit Sinha1-4/+27
2018-06-27Corrected scale-up command line argumentsChornyi, TarasX1-1/+1
Change-Id: If308fde797dcb01e58f37ad81bb116fde542366a Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
2018-06-27Fix NSB NfVi support for 25 and 40GbpsXavier Simonart1-4/+27
When setting interface_speed option in the test case, NSB/PROX was still considering 100% as 10 Gbps. With this fix, when interface_speed is set to for instance 25 Gbps then NSB/PROX will start generate at 25 Gbps. Yardstick logging info printed on the screen will show performance result as percentage of interface_speed (e.g. 100% will be 25 Gbps). This is done by sending the command "speed 250" to PROX (PROX cannot know the underlying interface speed in all cases e.g. in virtio, and hence considers 100% as 10Gbps). JIRA: YARDSTICK-1217 Change-Id: I4989161b04a7afa5e347935ee7ccef7dfe5a504d Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-06-27Merge "Resolve NameError in test_utils.py"Rodolfo Alonso Hernandez0-0/+0
2018-06-27NSB NFVi PROX VPE losing many packetsDanielMartinBuckley6-1169/+10165
JIRA: YARDSTICK-1105 Running a vPE test ends up with up to 25% drooped packets. This is due to tolerated loss being incorrectly configured, test duration was too short and test interval was too short. Note This is due to the fact that vPE use case have by default a tolerated loss of 100%, Now changed to 0.001, same as L2FWD Also: Grafan dashboard has been updated to show all SUT CPUS Utilization in 1 panel. And LINE rate MIN, MAX & TEST Rate have been added Change-Id: I7adae2199b3f656fe460705b6aeb3aa69c767d50 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-27Merge "Define several containers per pod in a replication controller"Rodolfo Alonso Hernandez2-50/+102
2018-06-27Merge "Decrease Sampling interval"Abhijit Sinha4-39/+123
2018-06-26NSB NFVi BNG test fails to run - stops after one stepDanielMartinBuckley2-4/+17
JIRA: YARDSTICK-1244 When sending the start or stop command to PROX. We sould not send the same core. We should not send "start 1,1" instead we should send "start 1" Change-Id: Ie600dc3ed808fd00341e92f13bd52199e68dc51f Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Decrease Sampling intervalDanielMartinBuckley5-39/+124
JIRA: YARDSTICK-1219 Currently NSB for NFVI using PROX returns sampling information every 13 seconds. This is too slow. It is required to return sampling information form Generator AND VNF at least every 1 second. This change is depandant on JIRA: YARDSTICK-1212 and YARDSTICK-1220 Change-Id: Ica7ab795a2919d191d8cd846d028e15739e33fb7 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Merge "Addition of Configurable Sampling and Configurable Confirmation Retry"Abhijit Sinha7-45/+671
2018-06-26Merge "Bugfix: heat conext of test case yamls jinja2 bypass sriov type"Abhijit Sinha22-25/+22
2018-06-26Resolve NameError in test_utils.pyEmma Foley1-0/+1
The import of the yardstick module was removed from test_util.py, which relied on this module location for a file name in test_import_modules_from_package_no_mod and test_import_modules_from_package. JIRA: YARDSTICK-1258 Change-Id: I754dbadfb8d788236f354e9a0c1a61ad6c4abf70 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-06-26Merge "Extended Context class with get_physical_nodes functionality"Rodolfo Alonso Hernandez20-70/+464
2018-06-26Addition of Configurable Sampling and Configurable Confirmation RetryDanielMartinBuckley7-45/+671
JIRA: YARDSTICK-1221 In order to increase accuracy of result the following are done :- - Improve Measurement Accuracy (YARDSTICK-1212) - Improve Sampling Interval (YARDSTICK-1219) - Allow 4 PROX ports to be read simultaneously (YARDSTICK-1220) This change does the following :- - Stores LINE Rate statistics of Sample - Requires a confirmation retry before deciding to increase or decrease this is configurable. - Allows the user to disable Sampling or specify a sample interval - Added Code Coverage of ProxDurationRunner based on YARDSTICK-1199 Change-Id: I27242ac1849c9a2712866385b5fbc05977c71516 Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
2018-06-26Merge "Bugfix: HA kill process recovery has a conflict"Abhijit Sinha2-8/+33
2018-06-26Merge "NSB Topology fix for Prox 4 port test case"Emma Foley14-47/+52
2018-06-26Merge "Refactor "utils.parse_ini_file" testing"Rodolfo Alonso Hernandez1-17/+93
2018-06-26Merge "Refactor remote command execution in pktgen_dpdk"Emma Foley2-5/+18
2018-06-26Extended Context class with get_physical_nodes functionalityChornyi, TarasX20-70/+464
JIRA: YARDSTICK-1255 Change-Id: I446d715dc6cf716a4fcbc1b809c1b1d6303071e0 Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
2018-06-26Merge "Add unit test file for DurationRunner"Rodolfo Alonso Hernandez1-0/+39
2018-06-26Merge "Refactor remote command execution in pktgen"Rex Lee4-133/+107
2018-06-26NSB Topology fix for Prox 4 port test caseAbhijit Sinha14-47/+52
The uplink and downlink interfaces for the 4 port test cases were inconsistent and fixed in this commit. This affects all the 4 port PROX test cases. Tested on: Heat L2fwd-4 and L3fwd-4 test case. JIRA: YARDSTICK-1185 Change-Id: Ia2ce7ed0dc395b812f84ede94e259b42dc833579 Signed-off-by:Abhijit Sinha <abhijit.sinha@intel.com>
2018-06-26Bugfix: HA kill process recovery has a conflictrexlee87762-8/+33
It happens in Nokia SUT when running in the Plugfest. The problem happens when the start_process start to recover the killed process (like nova-api), but the self-cured mechanism already recovered. And somehow it lead to a conflict and has problems. So the recover of the HA attack-recover should be improved to only recover it when it needs to. JIRA: YARDSTICK-1222 Change-Id: I1acb5a7d59d6fe4e0de0b0c5942fa89e051dd1ff Signed-off-by: rexlee8776 <limingjiang@huawei.com>
2018-06-25Add unit test file for DurationRunnerMiikka Koistinen1-0/+39
JIRA: YARDSTICK-1199 Change-Id: I5526935207ae3661a4cb8b8d25e93bc26adc3ef2 Signed-off-by: Miikka Koistinen <miikka.koistinen@nokia.com>
2018-06-25Merge "Cleanup CGNAPT unit tests"Rodolfo Alonso Hernandez1-123/+70
2018-06-25Merge "Add "volumeMounts" parameter in Kubernetes context"Rodolfo Alonso Hernandez2-28/+89
2018-06-25Merge "Add "volumes" parameter in Kubernetes context"Rodolfo Alonso Hernandez6-40/+118
2018-06-25Change IxNextgen library loadRodolfo Alonso Hernandez2-23/+8
Changed IxNextgen library load in IXIA RFC2544 traffic generator call. JIRA: YARDSTICK-1116 Change-Id: Icbdc5f1255dd2676584f3a1be767287e55e71f4a Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-22Merge "Configure ACL via static file"Abhijit Sinha18-572/+511
2018-06-21Configure ACL via static fileMytnyk, Volodymyr18-572/+511
This patch allows user to configure ACL/vFW SampleVNF ACL via configuration file provided in TC definition. The Yardstick applies the rules to SampleVNF from specified config file + rules generated by Yardstick (default rules). The example of SampleVNF ACL CLI commands generated/applied by Yardstick can be found at (using default ACL config file): ACL VNF ACL CLI commands: acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723303/ vFW VNF ACL CLI commands: vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml http://paste.openstack.org/show/723304/ Change-Id: I76a630261a982083b628e3985fc3bec14ca495db Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
2018-06-21Merge "Cleanup EnvCommand test cases"Rodolfo Alonso Hernandez1-33/+37
2018-06-21Merge "Add scale out TCs with availability zone support"Rodolfo Alonso Hernandez6-1/+546
2018-06-21Merge "Document for Fraser test case results"Jing Lu26-17/+1962
2018-06-20NSB setup inventory name changedRodolfo Alonso Hernandez1-1/+1
NSB setup script [1] fails when retrieving the inventory file. This script is going to be deprecated but we still support it. [1] https://github.com/opnfv/yardstick/blob/master/nsb_setup.sh JIRA: YARDSTICK-1247 Change-Id: I3798531652b0e3a1a007d1d9434998fdd54645d7 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-20Merge "Refactor RFC2455 TRex traffic profile injection"Rodolfo Alonso Hernandez17-1042/+855
2018-06-20Merge "Add "duration" parameter to test case definition"Rodolfo Alonso Hernandez27-130/+128
2018-06-19Merge "Update pmd/lcore mask for OVS-DPDK context"Emma Foley2-3/+41
2018-06-19Refactor remote command execution in pktgen_dpdkMiikka Koistinen2-5/+18
PktgenDPDKLatency.run will raise a RuntimeError if a remote command fails. This commit makes it use the already existing exception raising mechanism in yardstick's ssh client. JIRA: YARDSTICK-1166 Change-Id: I3a3c7691399044b174f5d040c015c9b907b2fe5d Signed-off-by: Miikka Koistinen <miikka.koistinen@nokia.com>
2018-06-19Refactor remote command execution in pktgenMiikka Koistinen4-133/+107
Some remote commands in Pktgen are executed without checking the exit status. This patch makes all remote commands check exit value, and removes unused variables that are captured from remote command executions. JIRA: YARDSTICK-1166 Change-Id: I42a667ebd22d086887d61e1671bc569b03c59d33 Signed-off-by: Miikka Koistinen <miikka.koistinen@nokia.com>
2018-06-18Update pmd/lcore mask for OVS-DPDK contextStepan Andrushko2-3/+41
Added default values for pmd/lcore mask to the SampleVNF test case for Trex TG. lcore mask - specifies the CPU cores used for non-datapath OVS-DPDK threads. pmd mask - specifies the CPU cores used for data path packet processing. Updated documentation for Standalone OVS-DPDK context. JIRA: YARDSTICK-1246 Change-Id: I8d008a185c94d2047ffa4769d7974bc4d283fd7f Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
2018-06-18Cleanup EnvCommand test casesRodolfo Alonso Hernandez1-33/+37
Refactor exception testing and remove console output. JIRA: YARDSTICK-1235 Change-Id: I6376c3637ffb6476a2578ef963cd2420b63bab52 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-18Refactor RFC2455 TRex traffic profile injectionRodolfo Alonso Hernandez17-1042/+855
The TRex RFC2455 traffic profile configures the duration of the traffic injection. Once the traffic is started, the traffic profile should poll the traffic injector client for the injection status. When the injection is finished, the traffic execution should end. Instead of this, the traffic profile waits a fixed time (using time.sleep method) and then stops the traffic. This approach is not accurate and may cause shorter injection periods. JIRA: YARDSTICK-1197 Change-Id: I5090df81ef4ec7945ff6c1aff070656b48e0fe77 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-18Add "duration" parameter to test case definitionRodolfo Alonso Hernandez27-130/+128
Add "duration" parameter to test case definition, in scenario:options section. This parameter will be rendered in the traffic profile. If the parameter is not present in the test case scenario options, the default time written in the traffic profile options will be 30 seconds (TrafficProfile.DEFAULT_DURATION = 30). If the traffic profile injection time is not defined, the default injection time will be 30 seconds. testcase:scenario:options:duration (default = 30) render --> traffic_profile:duration parse --> TrafficProfile.duration (default = 30) Target traffic profiles (RFC2544): - RFC2544Profile - IXIARFC2544Profile JIRA: YARDSTICK-1194 Change-Id: I968922e6bb882d7ee15aa1c4db4037face7a3492 Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-18Merge changes from topic 'convert-sla-asserts-to-raises'Abhijit Sinha3-87/+200
* changes: Replace MagicMocks with Mocks from SearchRunner UTs Add vsperf_dpdk SLA validation unit test cases Cleanup vsperf unit tests
2018-06-18Merge "Convert SLA asserts to raises"Abhijit Sinha46-156/+220
2018-06-18Stop running tests from tests/unitEmma Foley6-47/+7
Since all tests have been moved into yardstick/tests, temperary code to run tests in both tests and yardstick/tests should be removed. JIRA: YARDSTICK-837 Change-Id: I3bf3c9ece9bc8457d992e53ee8cc5cadb1dec8f0 Signed-off-by: Emma Foley <emma.l.foley@intel.com>
2018-06-18Merge "Cleanup BaseMonitor unit tests"Rodolfo Alonso Hernandez1-7/+11
2018-06-18Cleanup BaseMonitor unit testsRodolfo Alonso Hernandez1-7/+11
Stop multiprocessing queues to avoid BrokenPipe exception. Assert correctly the raise of exceptions. JIRA: YARDSTICK-1229 Change-Id: I1a1c92c49a439283a35c9a69b59d6866f35ec09a Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
2018-06-15Replace MagicMocks with Mocks from SearchRunner UTsMiikka Koistinen1-27/+16
This patch replaces unneeded MagicMocks with Mocks from TestSearchRunner and TestSearchRunnerHelper. JIRA: YARDSTICK-1169 Change-Id: I30a7bbc71c0b1062e6c0dfe634a5a8f1ecb7c684 Signed-off-by: Miikka Koistinen <miikka.koistinen@nokia.com>
2018-06-15Convert SLA asserts to raisesMiikka Koistinen46-156/+220
This commit converts Python assertions to a custom exception in all places where SLA validation is checked with an assertion. This commit also fixes all emerged pylint errors. JIRA: YARDSTICK-966 Change-Id: If771ed03b2cbc0a43a57fcfb9293f18740b3ff80 Signed-off-by: Miikka Koistinen <miikka.koistinen@nokia.com>