diff options
Diffstat (limited to 'yardstick/network_services/traffic_profile/rfc2544.py')
| -rw-r--r-- | yardstick/network_services/traffic_profile/rfc2544.py | 66 |
1 files changed, 45 insertions, 21 deletions
diff --git a/yardstick/network_services/traffic_profile/rfc2544.py b/yardstick/network_services/traffic_profile/rfc2544.py index b54fc575f..e33c437c9 100644 --- a/yardstick/network_services/traffic_profile/rfc2544.py +++ b/yardstick/network_services/traffic_profile/rfc2544.py @@ -19,6 +19,7 @@ from trex_stl_lib import trex_stl_client from trex_stl_lib import trex_stl_packet_builder_scapy from trex_stl_lib import trex_stl_streams +from yardstick.common import constants from yardstick.network_services.traffic_profile import trex_traffic_profile @@ -118,7 +119,8 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): ports.append(port_num) port_pg_id.add_port(port_num) profile = self._create_profile(profile_data, - self.rate, port_pg_id) + self.rate, port_pg_id, + self.config.enable_latency) self.generator.client.add_streams(profile, ports=[port_num]) self.generator.client.start(ports=ports, @@ -126,7 +128,7 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): force=True) return ports, port_pg_id - def _create_profile(self, profile_data, rate, port_pg_id): + def _create_profile(self, profile_data, rate, port_pg_id, enable_latency): """Create a STL profile (list of streams) for a port""" streams = [] for packet_name in profile_data: @@ -134,11 +136,13 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): get('outer_l2', {}).get('framesize')) imix_data = self._create_imix_data(imix) self._create_vm(profile_data[packet_name]) - _streams = self._create_streams(imix_data, rate, port_pg_id) + _streams = self._create_streams(imix_data, rate, port_pg_id, + enable_latency) streams.extend(_streams) return trex_stl_streams.STLProfile(streams) - def _create_imix_data(self, imix): + def _create_imix_data(self, imix, + weight_mode=constants.DISTRIBUTION_IN_PACKETS): """Generate the IMIX distribution for a STL profile The input information is the framesize dictionary in a test case @@ -157,6 +161,20 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): E.g.: imix_count = {64: 25, 128: 75} + The weight mode is described in [1]. There are two ways to describe the + weight of the packets: + - Distribution in packets: the weight defines the percentage of + packets sent per packet size. IXIA uses this definition. + - Distribution in bytes: the weight defines the percentage of bytes + sent per packet size. + + Packet size # packets D. in packets Bytes D. in bytes + 40 7 58.33% 280 7% + 576 4 33.33% 2304 56% + 1500 1 8.33% 1500 37% + + [1] https://en.wikipedia.org/wiki/Internet_Mix + :param imix: (dict) IMIX size and weight """ imix_count = {} @@ -171,8 +189,16 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): imix_sum = 100 weight_normalize = float(imix_sum) / 100 - return {size: float(weight) / weight_normalize - for size, weight in imix_count.items()} + imix_dip = {size: float(weight) / weight_normalize + for size, weight in imix_count.items()} + + if weight_mode == constants.DISTRIBUTION_IN_BYTES: + return imix_dip + + byte_total = sum([int(size) * weight + for size, weight in imix_dip.items()]) + return {size: (int(size) * weight * 100) / byte_total + for size, weight in imix_dip.items()} def _create_vm(self, packet_definition): """Create the STL Raw instructions""" @@ -213,7 +239,7 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): return trex_stl_packet_builder_scapy.STLPktBuilder( pkt=base_pkt / pad, vm=self.trex_vm) - def _create_streams(self, imix_data, rate, port_pg_id): + def _create_streams(self, imix_data, rate, port_pg_id, enable_latency): """Create a list of streams per packet size The STL TX mode speed of the generated streams will depend on the frame @@ -237,7 +263,8 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): in imix_data.items() if float(weight) > 0): packet = self._create_single_packet(size) pg_id = port_pg_id.increase_pg_id() - stl_flow = trex_stl_streams.STLFlowLatencyStats(pg_id=pg_id) + stl_flow = (trex_stl_streams.STLFlowLatencyStats(pg_id=pg_id) if + enable_latency else None) mode = trex_stl_streams.STLTXCont(percentage=weight * rate / 100) streams.append(trex_stl_client.STLStream( packet=packet, flow_stats=stl_flow, mode=mode)) @@ -247,19 +274,16 @@ class RFC2544Profile(trex_traffic_profile.TrexProfile): correlated_traffic): """Calculate the drop percentage and run the traffic""" completed = False - tx_rate_fps = 0 - rx_rate_fps = 0 - for sample in samples: - tx_rate_fps += sum( - port['tx_throughput_fps'] for port in sample.values()) - rx_rate_fps += sum( - port['rx_throughput_fps'] for port in sample.values()) - tx_rate_fps = round(float(tx_rate_fps) / len(samples), 2) - rx_rate_fps = round(float(rx_rate_fps) / len(samples), 2) - - # TODO(esm): RFC2544 doesn't tolerate packet loss, why do we? - out_packets = sum(port['out_packets'] for port in samples[-1].values()) - in_packets = sum(port['in_packets'] for port in samples[-1].values()) + out_pkt_end = sum(port['out_packets'] for port in samples[-1].values()) + in_pkt_end = sum(port['in_packets'] for port in samples[-1].values()) + out_pkt_ini = sum(port['out_packets'] for port in samples[0].values()) + in_pkt_ini = sum(port['in_packets'] for port in samples[0].values()) + time_diff = (list(samples[-1].values())[0]['timestamp'] - + list(samples[0].values())[0]['timestamp']).total_seconds() + out_packets = out_pkt_end - out_pkt_ini + in_packets = in_pkt_end - in_pkt_ini + tx_rate_fps = float(out_packets) / time_diff + rx_rate_fps = float(in_packets) / time_diff drop_percent = 100.0 # https://tools.ietf.org/html/rfc2544#section-26.3 |