diff options
Diffstat (limited to 'tests/unit/benchmark/contexts')
| -rw-r--r-- | tests/unit/benchmark/contexts/standalone_duplicate_sample.yaml | 135 | ||||
| -rw-r--r-- | tests/unit/benchmark/contexts/standalone_sample.yaml | 112 | ||||
| -rw-r--r-- | tests/unit/benchmark/contexts/test_node.py | 4 | ||||
| -rw-r--r-- | tests/unit/benchmark/contexts/test_standalone.py | 131 |
4 files changed, 380 insertions, 2 deletions
diff --git a/tests/unit/benchmark/contexts/standalone_duplicate_sample.yaml b/tests/unit/benchmark/contexts/standalone_duplicate_sample.yaml new file mode 100644 index 000000000..e468d0465 --- /dev/null +++ b/tests/unit/benchmark/contexts/standalone_duplicate_sample.yaml @@ -0,0 +1,135 @@ +# Copyright (c) 2016-2017 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +--- +# Sample config file about the POD information, including the +# name/IP/user/ssh key of Bare Metal and Controllers/Computes +# +# The options of this config file include: +# name: the name of this node +# role: node's role, support role: Master/Controller/Comupte/BareMetal +# ip: the node's IP address +# user: the username for login +# key_filename:the path of the private key file for login + +nodes: +- + name: node1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:05:00.0" + driver: i40e + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:05:00.1" + driver: i40e + dpdk_port_num: 1 + local_ip: "152.16.100.21" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:02" +- + name: node2 + role: nfvi_node + class: OvsDpdk + ip: 1.1.1.2 + user: root + password: r00t + vports: + - dpdkvhostuser0 + - dpdkvhostuser1 + vports_mac: + - "00:00:00:00:00:03" + - "00:00:00:00:00:04" + phy_ports: # Physical ports to configure sriov + - "0000:05:00.0" + - "0000:05:00.1" + flow: + - ovs-ofctl add-flow br0 in_port=1,action=output:3 + - ovs-ofctl add-flow br0 in_port=3,action=output:1 + - ovs-ofctl add-flow br0 in_port=4,action=output:2 + - ovs-ofctl add-flow br0 in_port=2,action=output:4 + phy_driver: i40e # kernel driver + images: "/var/lib/libvirt/images/ubuntu.qcow2" +- + name: node2 + role: nfvi_node + class: OvsDpdk + ip: 1.1.1.5 + user: root + password: r00t + vports: + - dpdkvhostuser0 + - dpdkvhostuser1 + vports_mac: + - "00:00:00:00:00:03" + - "00:00:00:00:00:04" + phy_ports: # Physical ports to configure sriov + - "0000:05:00.0" + - "0000:05:00.1" + flow: + - ovs-ofctl add-flow br0 in_port=1,action=output:3 + - ovs-ofctl add-flow br0 in_port=3,action=output:1 + - ovs-ofctl add-flow br0 in_port=4,action=output:2 + - ovs-ofctl add-flow br0 in_port=2,action=output:4 + phy_driver: i40e # kernel driver + images: "/var/lib/libvirt/images/ubuntu.qcow2" + +- + name: node3 + role: vnf + ip: 1.1.1.3 + user: root + password: r00t + host: 1.1.1.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:00:04.0" + driver: virtio-pci + dpdk_port_num: 0 + local_ip: "152.16.100.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:05" + + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:00:05.0" + driver: virtio-pci + dpdk_port_num: 1 + local_ip: "152.16.40.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:06" + routing_table: + - network: "152.16.100.20" + netmask: "255.255.255.0" + gateway: "152.16.100.20" + if: "xe0" + - network: "152.16.40.20" + netmask: "255.255.255.0" + gateway: "152.16.40.20" + if: "xe1" + nd_route_tbl: + - network: "0064:ff9b:0:0:0:0:9810:6414" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:6414" + if: "xe0" + - network: "0064:ff9b:0:0:0:0:9810:2814" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:2814" + if: "xe1" diff --git a/tests/unit/benchmark/contexts/standalone_sample.yaml b/tests/unit/benchmark/contexts/standalone_sample.yaml new file mode 100644 index 000000000..95e12d62f --- /dev/null +++ b/tests/unit/benchmark/contexts/standalone_sample.yaml @@ -0,0 +1,112 @@ +# Copyright (c) 2016-2017 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +--- +# Sample config file about the POD information, including the +# name/IP/user/ssh key of Bare Metal and Controllers/Computes +# +# The options of this config file include: +# name: the name of this node +# role: node's role, support role: Master/Controller/Comupte/BareMetal +# ip: the node's IP address +# user: the username for login +# key_filename:the path of the private key file for login + +nodes: +- + name: node1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:05:00.0" + driver: i40e + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:05:00.1" + driver: i40e + dpdk_port_num: 1 + local_ip: "152.16.100.21" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:02" +- + name: node2 + role: nfvi_node + class: OvsDpdk + ip: 1.1.1.2 + user: root + password: r00t + vports: + - dpdkvhostuser0 + - dpdkvhostuser1 + vports_mac: + - "00:00:00:00:00:03" + - "00:00:00:00:00:04" + phy_ports: # Physical ports to configure sriov + - "0000:05:00.0" + - "0000:05:00.1" + flow: + - ovs-ofctl add-flow br0 in_port=1,action=output:3 + - ovs-ofctl add-flow br0 in_port=3,action=output:1 + - ovs-ofctl add-flow br0 in_port=4,action=output:2 + - ovs-ofctl add-flow br0 in_port=2,action=output:4 + phy_driver: i40e # kernel driver + images: "/var/lib/libvirt/images/ubuntu.qcow2" + +- + name: node3 + role: vnf + ip: 1.1.1.3 + user: root + password: r00t + host: 1.1.1.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:00:04.0" + driver: virtio-pci + dpdk_port_num: 0 + local_ip: "152.16.100.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:05" + + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:00:05.0" + driver: virtio-pci + dpdk_port_num: 1 + local_ip: "152.16.40.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:06" + routing_table: + - network: "152.16.100.20" + netmask: "255.255.255.0" + gateway: "152.16.100.20" + if: "xe0" + - network: "152.16.40.20" + netmask: "255.255.255.0" + gateway: "152.16.40.20" + if: "xe1" + nd_route_tbl: + - network: "0064:ff9b:0:0:0:0:9810:6414" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:6414" + if: "xe0" + - network: "0064:ff9b:0:0:0:0:9810:2814" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:2814" + if: "xe1" diff --git a/tests/unit/benchmark/contexts/test_node.py b/tests/unit/benchmark/contexts/test_node.py index de5ba7066..64fe4a566 100644 --- a/tests/unit/benchmark/contexts/test_node.py +++ b/tests/unit/benchmark/contexts/test_node.py @@ -42,7 +42,7 @@ class NodeContextTestCase(unittest.TestCase): 'file': self._get_file_abspath("error_file") } - self.assertRaises(SystemExit, self.test_context.init, attrs) + self.assertRaises(IOError, self.test_context.init, attrs) def test_successful_init(self): @@ -100,7 +100,7 @@ class NodeContextTestCase(unittest.TestCase): attr_name = 'node1.foo' - self.assertRaises(SystemExit, self.test_context._get_server, attr_name) + self.assertRaises(ValueError, self.test_context._get_server, attr_name) def test__get_server_found(self): diff --git a/tests/unit/benchmark/contexts/test_standalone.py b/tests/unit/benchmark/contexts/test_standalone.py new file mode 100644 index 000000000..687ef7305 --- /dev/null +++ b/tests/unit/benchmark/contexts/test_standalone.py @@ -0,0 +1,131 @@ +#!/usr/bin/env python + +# Copyright (c) 2016-2017 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# Unittest for yardstick.benchmark.contexts.standalone + +from __future__ import absolute_import +import os +import unittest + +from yardstick.benchmark.contexts import standalone + + +class StandaloneContextTestCase(unittest.TestCase): + + NODES_SAMPLE = "standalone_sample.yaml" + NODES_DUPLICATE_SAMPLE = "standalone_duplicate_sample.yaml" + + def setUp(self): + self.test_context = standalone.StandaloneContext() + + def test_construct(self): + + self.assertIsNone(self.test_context.name) + self.assertIsNone(self.test_context.file_path) + self.assertEqual(self.test_context.nodes, []) + self.assertEqual(self.test_context.nfvi_node, []) + + def test_unsuccessful_init(self): + + attrs = { + 'name': 'foo', + 'file': self._get_file_abspath("error_file") + } + + self.assertRaises(IOError, self.test_context.init, attrs) + + def test_successful_init(self): + + attrs = { + 'name': 'foo', + 'file': self._get_file_abspath(self.NODES_SAMPLE) + } + + self.test_context.init(attrs) + + self.assertEqual(self.test_context.name, "foo") + self.assertEqual(len(self.test_context.nodes), 3) + self.assertEqual(len(self.test_context.nfvi_node), 1) + self.assertEqual(self.test_context.nfvi_node[0]["name"], "node2") + + def test__get_server_with_dic_attr_name(self): + + attrs = { + 'name': 'foo', + 'file': self._get_file_abspath(self.NODES_SAMPLE) + } + + self.test_context.init(attrs) + + attr_name = {'name': 'foo.bar'} + result = self.test_context._get_server(attr_name) + + self.assertEqual(result, None) + + def test__get_server_not_found(self): + + attrs = { + 'name': 'foo', + 'file': self._get_file_abspath(self.NODES_SAMPLE) + } + + self.test_context.init(attrs) + + attr_name = 'bar.foo' + result = self.test_context._get_server(attr_name) + + self.assertEqual(result, None) + + def test__get_server_duplicate(self): + + attrs = { + 'name': 'foo', + 'file': self._get_file_abspath(self.NODES_DUPLICATE_SAMPLE) + } + + self.test_context.init(attrs) + + attr_name = 'node2.foo' + + self.assertRaises(ValueError, self.test_context._get_server, attr_name) + + def test__get_server_found(self): + + attrs = { + 'name': 'foo', + 'file': self._get_file_abspath(self.NODES_SAMPLE) + } + + self.test_context.init(attrs) + + attr_name = 'node1.foo' + result = self.test_context._get_server(attr_name) + + self.assertEqual(result['ip'], '1.1.1.1') + self.assertEqual(result['name'], 'node1.foo') + self.assertEqual(result['user'], 'root') + + def test_deploy(self): + self.assertIsNone(self.test_context.deploy()) + + def test_undeploy(self): + self.assertIsNone(self.test_context.undeploy()) + + def _get_file_abspath(self, filename): + curr_path = os.path.dirname(os.path.abspath(__file__)) + file_path = os.path.join(curr_path, filename) + return file_path |