diff options
Diffstat (limited to 'samples/vnf_samples/traffic_profiles')
| -rw-r--r-- | samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml b/samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml new file mode 100644 index 000000000..d2cc18c15 --- /dev/null +++ b/samples/vnf_samples/traffic_profiles/ipv4_throughput-scale-up.yaml @@ -0,0 +1,102 @@ +# Copyright (c) 2016-2018 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# flow definition for ACL tests - 1K flows - ipv4 only +# +# the number of flows defines the widest range of parameters +# for example if srcip_range=1.0.0.1-1.0.0.255 and dst_ip_range=10.0.0.1-10.0.1.255 +# and it should define only 16 flows +# +# there is assumption that packets generated will have a random sequences of following addresses pairs +# in the packets +# 1. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512) +# 2. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512) +# ... +# 512. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512) +# +# not all combination should be filled +# Any other field with random range will be added to flow definition +# +# the example.yaml provides all possibilities for traffic generation +# +# the profile defines a public and private side to make limited traffic correlation +# between private and public side same way as it is made by IXIA solution. +# +{% set vports = get(extra_args, 'vports', '2') %} +--- +schema: "nsb:traffic_profile:0.1" + +# This file is a template, it will be filled with values from tc.yaml before passing to the traffic generator + +name: rfc2544 +description: Traffic profile to run RFC2544 latency +traffic_profile: + traffic_type: RFC2544Profile # defines traffic behavior - constant or look for highest possible throughput + frame_rate: 100 # pc of linerate + # that specifies a range (e.g. ipv4 address, port) +{% set count = 0 %} +{% for vport in range(vports|int) %} +uplink_{{vport}}: + ipv4: + id: {{count + 1 }} + outer_l2: + framesize: + 64B: "{{ get(imix, 'imix.uplink.64B', '0') }}" + 128B: "{{ get(imix, 'imix.uplink.128B', '0') }}" + 256B: "{{ get(imix, 'imix.uplink.256B', '0') }}" + 373b: "{{ get(imix, 'imix.uplink.373B', '0') }}" + 512B: "{{ get(imix, 'imix.uplink.512B', '0') }}" + 570B: "{{ get(imix, 'imix.uplink.570B', '0') }}" + 1400B: "{{ get(imix, 'imix.uplink.1400B', '0') }}" + 1500B: "{{ get(imix, 'imix.uplink.1500B', '0') }}" + 1518B: "{{ get(imix, 'imix.uplink.1518B', '0') }}" + outer_l3v4: + proto: "udp" + srcip4: "{{ get(flow, 'flow.src_ip_{{vport}}', '1.1.1.1-1.1.255.255') }}" + dstip4: "{{ get(flow, 'flow.dst_ip_{{vport}}', '90.90.1.1-90.90.255.255') }}" + count: "{{ get(flow, 'flow.count', '1') }}" + ttl: 32 + dscp: 0 + outer_l4: + srcport: "{{ get(flow, 'flow.src_port_{{vport}}', '1234-4321') }}" + dstport: "{{ get(flow, 'flow.dst_port_{{vport}}', '2001-4001') }}" + count: "{{ get(flow, 'flow.count', '1') }}" +downlink_{{vport}}: + ipv4: + id: {{count + 2}} + outer_l2: + framesize: + 64B: "{{ get(imix, 'imix.downlink.64B', '0') }}" + 128B: "{{ get(imix, 'imix.downlink.128B', '0') }}" + 256B: "{{ get(imix, 'imix.downlink.256B', '0') }}" + 373b: "{{ get(imix, 'imix.downlink.373B', '0') }}" + 512B: "{{ get(imix, 'imix.downlink.512B', '0') }}" + 570B: "{{ get(imix, 'imix.downlink.570B', '0') }}" + 1400B: "{{ get(imix, 'imix.downlink.1400B', '0') }}" + 1500B: "{{ get(imix, 'imix.downlink.1500B', '0') }}" + 1518B: "{{ get(imix, 'imix.downlink.1518B', '0') }}" + + outer_l3v4: + proto: "udp" + srcip4: "{{ get(flow, 'flow.dst_ip_{{vport}}', '90.90.1.1-90.90.255.255') }}" + dstip4: "{{ get(flow, 'flow.src_ip_{{vport}}', '1.1.1.1-1.1.255.255') }}" + count: "{{ get(flow, 'flow.count', '1') }}" + ttl: 32 + dscp: 0 + outer_l4: + srcport: "{{ get(flow, 'flow.dst_port_{{vport}}', '1234-4321') }}" + dstport: "{{ get(flow, 'flow.src_port_{{vport}}', '2001-4001') }}" + count: "{{ get(flow, 'flow.count', '1') }}" +{% set count = count + 2 %} +{% endfor %}
\ No newline at end of file |