aboutsummaryrefslogtreecommitdiffstats
path: root/samples/vnf_samples/nsut/vepc
diff options
context:
space:
mode:
Diffstat (limited to 'samples/vnf_samples/nsut/vepc')
-rw-r--r--samples/vnf_samples/nsut/vepc/tc_epc_network_service_request_landslide.yaml67
-rw-r--r--samples/vnf_samples/nsut/vepc/tc_epc_ue_service_request_landslide.yaml228
2 files changed, 295 insertions, 0 deletions
diff --git a/samples/vnf_samples/nsut/vepc/tc_epc_network_service_request_landslide.yaml b/samples/vnf_samples/nsut/vepc/tc_epc_network_service_request_landslide.yaml
new file mode 100644
index 000000000..55a96f4e4
--- /dev/null
+++ b/samples/vnf_samples/nsut/vepc/tc_epc_network_service_request_landslide.yaml
@@ -0,0 +1,67 @@
+# Copyright (c) 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+---
+schema: yardstick:task:0.1
+description: >
+ Downlink Data Notification from Network to UE that are in Idle state.
+
+scenarios:
+- type: NSPerf
+ traffic_profile: "../../traffic_profiles/landslide/landslide_dmf_udp.yaml"
+ session_profile: "../../traffic_profiles/landslide/landslide_session_network_service_request.yaml"
+ topology: "vepc_vnf_topology_landslide.yaml"
+ nodes:
+ tg__0: tg__0.traffic_gen
+ vnf__0: vnf__0.vnf_epc
+ options:
+ dmf:
+ transactionRate: 0.1
+ packetSize: 512
+ burstCount: 1 # Applies only to Basic UDP DMF, DataProtocol==udp
+ test_cases: # test case parameters to apply on session profile
+ - type: SGW_Node # test type from test session profile
+ AssociatedPhys: 'eth6'
+ BearerAddrPool: 2001::1
+ BearerV4AddrPool: 1.0.0.1
+ Sessions: '20000'
+ - type: SGW_Nodal # test type from test session profile
+ StartRate: '1000.0'
+ DisconnectRate: '1000.0'
+ Sessions: '20000'
+
+ # Configurations:
+ # 1. Specify continuous periodical events: UE goes to Idle state -> DL Data Notification
+ # E.g. Set Gtp2IdleEntryTime = 5 - UE goes to idle state after 5 seconds
+ # Set transactionRate = 0.1 - Send traffic periodically every 10 seconds
+ # 2. Set traffic run start delay
+ # E.g. Set Gtp2IdleEntryTime = 5 - UE goes to idle state after 5 seconds
+ # Set TrafficStartDelay with value greater that Gtp2IdleEntryTime
+ Gtp2IdleEntryTime: '5' # Idle Entry Time (s)
+
+ # Downlink Data Notification settings
+ TrafficStartDelay: 1000 # Data Start Delay (ms)
+
+ runner:
+ type: Duration
+ duration: 300
+ interval: 5
+
+contexts:
+- name: traffic_gen
+ type: Node
+ file: /etc/yardstick/nodes/pod_landslide.yaml
+- name: vnf_epc
+ type: Node
+ file: /etc/yardstick/nodes/pod_vepc_sut.yaml
diff --git a/samples/vnf_samples/nsut/vepc/tc_epc_ue_service_request_landslide.yaml b/samples/vnf_samples/nsut/vepc/tc_epc_ue_service_request_landslide.yaml
new file mode 100644
index 000000000..eaf4ae99f
--- /dev/null
+++ b/samples/vnf_samples/nsut/vepc/tc_epc_ue_service_request_landslide.yaml
@@ -0,0 +1,228 @@
+# Copyright (c) 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+---
+schema: yardstick:task:0.1
+description: >
+ UE triggered bearer modification request with new QoS and TFT settings
+
+scenarios:
+- type: NSPerf
+ traffic_profile: "../../traffic_profiles/landslide/landslide_dmf_udp.yaml"
+ session_profile: "../../traffic_profiles/landslide/landslide_session_ue_service_request.yaml"
+ topology: "vepc_vnf_topology_landslide.yaml"
+ nodes:
+ tg__0: tg__0.traffic_gen
+ vnf__0: vnf__0.vnf_epc
+ options:
+ dmf:
+ transactionRate: 5
+ packetSize: 512
+ burstCount: 1 # Applies only to Basic UDP DMF, DataProtocol==udp
+ test_cases: # test case parameters to apply on session profile
+ - type: SGW_Node # test type from test session profile
+ AssociatedPhys: 'eth6'
+ BearerAddrPool: 2001::1
+ BearerV4AddrPool: 1.0.0.1
+ Sessions: '20000'
+ UeInitBearerEn: 'true'
+ DedicatedsPerDefaultBearer: 1 # number of dedicated bearers per default
+ DefaultBearers: 1 # number of default bearers
+ FireballEn: 'false' # Fireball settings
+
+ # Number of TFTs
+ # Parameter name pattern: TrafficNumTftsForContext<DEDICATED_BEARER_INDEX>
+ TrafficNumTftsForContext0: '1'
+
+ # TFT Settings
+ # Parameter name(s) depends on number of dedicated bearers and number of TFTs per bearer.
+ # Parameter naming pattern: "TrafficTftForContext<DEDICATED_BEARER_INDEX>_<TFT_INDEX>"
+ # E.g.:
+ # "TrafficTftForContext0_0" - dedicated bearer 1, 1st TFT
+ # "TrafficTftForContext0_1" - dedicated bearer 1, 2nd TFT
+ # "TrafficTftForContext1_0" - dedicated bearer 2, 1st TFT
+ TrafficTftForContext0_0:
+ array:
+ - '255' # Packet Evaluation Precedence
+ - '6' # Protocol Number
+ - ''
+ - '' # Starting Remote Port
+ - '' # Ending Remote Port
+ - '' # Remote Address
+ - '' # Starting Local Port
+ - '' # Ending Local Port
+ - '' # Type of Service
+ - '' # Mask
+ - '' # Security Parameter Index
+ - '' # Flow Label
+ - ''
+ - '' # Include In Bearer Modification Request
+ - '3' # Direction: 0 - Pre Rel 7, 1 - Downlink, 2 - Uplink, 3 - Bi-Directional
+ - ''
+ - ''
+ - ''
+ - ''
+ class: Array
+
+ - type: SGW_Nodal # test type from test session profile
+ StartRate: '1000.0'
+ DisconnectRate: '1000.0'
+ Sessions: '20000'
+ UeInitBearerEn: 'true'
+ DedicatedsPerDefaultBearer: '1' # number of dedicated bearers per default
+ DefaultBearers: '1' # number of default bearers
+ FireballEn: 'false' # Fireball settings
+
+ # Creation delay individually for each dedicated bearer
+ # Array items specifies timeout between default and dedicated bearers creation
+ # Array items corresponds to specific dedicated bearer:
+ # E.g. 1st item - 1st dedicated bearer, 2nd item - 2nd dedicated bearer, etc.
+ ConnectBearerDelay:
+ class: Array
+ array: ['1']
+
+ # Data start delay (ms)
+ TrafficStartDelay: 1000
+
+ # Number of TFTs
+ # Parameter name pattern: TrafficNumTftsForContext<DEDICATED_BEARER_INDEX>
+ TrafficNumTftsForContext0: '1'
+
+ # TFT settings
+ # Parameter name(s) depends on number of dedicated bearers and number of TFTs per bearer.
+ # Parameter naming pattern: "TrafficTftForContext<DEDICATED_BEARER_INDEX>_<TFT_INDEX>"
+ # E.g.:
+ # "TrafficTftForContext0_0" - dedicated bearer 1, 1st TFT
+ # "TrafficTftForContext0_1" - dedicated bearer 1, 2nd TFT
+ # "TrafficTftForContext1_0" - dedicated bearer 2, 1st TFT
+ TrafficTftForContext0_0:
+ array:
+ - '255' # Packet Evaluation Precedence
+ - '6' # Protocol Number
+ - ''
+ - '' # Starting Remote Port
+ - '' # Ending Remote Port
+ - '' # Remote Address
+ - '' # Starting Local Port
+ - '' # Ending Local Port
+ - '' # Type of Service
+ - '' # Mask
+ - '' # Security Parameter Index
+ - '' # Flow Label
+ - ''
+ - '' # Include In Bearer Modification Request
+ - '3' # Direction: 0 - Pre Rel 7, 1 - Downlink, 2 - Uplink, 3 - Bi-Directional
+ - ''
+ - ''
+ - ''
+ - ''
+ class: Array
+
+ # Bearers modification settings
+ # Dedicated bearers modification settings and TFT filters
+ Gtp2BearerModEn: 'true' # Enable/Disable bearer modification
+ Gtp2BearerModInit: 'UE' # Bearer modification initiator
+ Gtp2BearerDelayTime: '5' # Delay time (s)
+ Gtp2IncModQos_2: 'true' # Include QoS IE
+ Gtp2BearerContinuousMod: 'false' # Continuous modifications
+ # Operation code in TFT settings:
+ # Parameter name(s) depends on number of dedicated bearers
+ # Parameter naming pattern: "TrafficOpCodeForContext<DEDICATED_BEARER_INDEX>_2"
+ # E.g.:
+ # TrafficOpCodeForContext0_2 - operation code for 1st dedicated bearer's TFT
+ # TrafficOpCodeForContext1_2 - operation code for 2st dedicated bearer's TFT
+ # 1 - create new TFT
+ # 2 - delete existing TFT
+ # 3 - add packet filters to existing TFT
+ # 4 - replace packet filters in existing TFT
+ # 5 - delete packet filters from existing TFT
+ TrafficOpCodeForContext0_2: '1'
+
+ # Number of TFTs
+ # Parameter name pattern: TrafficNumTftsForContext<DEDICATED_BEARER_INDEX>_2
+ TrafficNumTftsForContext0_2: '1'
+
+ # TFT settings
+ # Parameter name(s) depends on number of dedicated bearers and number of TFTs per bearer.
+ # Parameter naming pattern: "TrafficTftForContext<DEDICATED_BEARER_INDEX>_<TFT_INDEX>_2"
+ # E.g.:
+ # "TrafficTftForContext0_0" - dedicated bearer 1, 1st TFT
+ # "TrafficTftForContext0_1" - dedicated bearer 1, 2nd TFT
+ # "TrafficTftForContext1_0" - dedicated bearer 2, 1st TFT
+ TrafficTftForContext0_0_2:
+ class: Array
+ array:
+ - '255' # Packet Evaluation Precedence
+ - '17' # Protocol Number
+ - ''
+ - '2003' # Starting Remote Port
+ - '2003' # Ending Remote Port
+ - '' # Remote Address
+ - '2002' # Starting Local Port
+ - '2002' # Ending Local Port
+ - '' # Type of Service
+ - '' # Mask
+ - '' # Security Parameter Index
+ - '' # Flow Label
+ - ''
+ - 'true' # Include In Bearer Modification Request
+ - '3' # Direction: 0 - Pre Rel 7, 1 - Downlink, 2 - Uplink, 3 - Bi-Directional
+ - ''
+ - ''
+ - ''
+ - ''
+
+ # Modified bearers QoS settings
+ Gtp2QosDetail_2: Individual # bearers QoS details (Summary, Individual, Per Bearer)
+
+ # Parameter name(s) depends on number of dedicated bearers
+ # Parameter(s) naming pattern: "Gtp2QosClassId_2_<BEARER_INDEX>"
+ # E.g.:
+ # Gtp2QosClassId_2_1 - default bearer class identifier
+ # Gtp2QosClassId_2_2 - 1st dedicated bearer class identifier
+ # Gtp2QosClassId_2_3 - 2st dedicated bearer class identifier
+ # Modified default bearer settings
+ Gtp2QosClassId_2_1: '1' # Bearer class identifier
+ Gtp2QosArpValue_2_1: '1' # Bearer ARP priority level
+ Gtp2QosArpPreemptCapEn_2_1: 'false' # Pre-emption capability
+ Gtp2QosArpPreemptVulnEn_2_1: 'false' # Pre-emption vulnerability
+ Gtp2QosMaxUplink_2_1: '1000' # Uplink maximum bit rates (kb/s)
+ Gtp2QosMaxDownlink_2_1: '1000' # Downlink maximum bit rates (kb/s)
+ Gtp2QosGuarUplink_2_1: '1000' # Uplink guaranteed bit rates (kb/s)
+ Gtp2QosGuarDownlink_2_1: '1000' # Downlink guaranteed bit rates (kb/s)
+
+ # Modified dedicated bearer settings
+ Gtp2QosClassId_2_2: '5' # Bearer class identifier
+ Gtp2QosArpValue_2_2: '1' # Bearer ARP priority level
+ Gtp2QosArpPreemptCapEn_2_2: 'false' # Pre-emption capability
+ Gtp2QosArpPreemptVulnEn_2_2: 'false' # Pre-emption vulnerability
+
+ # Uncomment this settings in case Gtp2QosClassId_2_2 is equal to 1
+ # Gtp2QosMaxUplink_2_2: '1000' # Uplink maximum bit rates (kb/s)
+ # Gtp2QosMaxDownlink_2_2: '1000' # Downlink maximum bit rates (kb/s)
+ # Gtp2QosGuarUplink_2_2: '1000' # Uplink guaranteed bit rates (kb/s)
+ # Gtp2QosGuarDownlink_2_2: '1000' # Downlink guaranteed bit rates (kb/s)
+
+ runner:
+ type: Duration
+ duration: 300
+ interval: 5
+
+contexts:
+- name: traffic_gen
+ type: Node
+ file: /etc/yardstick/nodes/pod_landslide.yaml
+- name: vnf_epc
+ type: Node
+ file: /etc/yardstick/nodes/pod_vepc_sut.yaml