aboutsummaryrefslogtreecommitdiffstats
path: root/nsb_setup.sh
diff options
context:
space:
mode:
Diffstat (limited to 'nsb_setup.sh')
-rwxr-xr-xnsb_setup.sh244
1 files changed, 244 insertions, 0 deletions
diff --git a/nsb_setup.sh b/nsb_setup.sh
new file mode 100755
index 000000000..02258a577
--- /dev/null
+++ b/nsb_setup.sh
@@ -0,0 +1,244 @@
+#! /bin/bash
+# Copyright (c) 2016-2017 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# Change to yardstick directory ( <current-dir>/.. ), and export it as REPO_DIR
+#
+cd "$(dirname "${BASH_SOURCE[0]}")"
+export REPO_DIR=$PWD
+echo "------------------------------------------------------------------------------"
+echo " REPO_DIR exported as $REPO_DIR"
+echo "------------------------------------------------------------------------------"
+
+if [ "$(whoami)" != "root" ]; then
+ echo "Must be root to run $0"
+ exit 1;
+fi
+
+INSTALL_BIN_PATH="/opt/nsb_bin"
+TREX_DOWNLOAD="https://trex-tgn.cisco.com/trex/release/v2.05.tar.gz"
+DPDK_DOWNLOAD="http://dpdk.org/browse/dpdk/snapshot/dpdk-16.07.zip"
+VIRTUAL_VENV="$INSTALL_BIN_PATH/yardstick_venv"
+
+#
+# Install libs needed for NSB
+#
+install_libs()
+{
+ echo "Install libs needed to build and run NSB Testing..."
+ apt-get update > /dev/null 2>&1
+ pkg=(git build-essential python-dev virtualenv python-virtualenv virtualenv linux-headers-$(uname -r) unzip python-pip libpcap-dev)
+ for i in "${pkg[@]}"; do
+ dpkg-query -W --showformat='${Status}\n' "${i}"|grep "install ok installed"
+ if [ "$?" -eq "1" ]; then
+ apt-get -y install "${i}";
+ fi
+ done
+ echo "Done"
+}
+
+install_yardstick()
+{
+ echo "Create install directory... $INSTALL_BIN_PATH"
+ mkdir -p $INSTALL_BIN_PATH
+ echo "Install yardstick dependencies and build Yardstick in venv..."
+ pushd .
+ rm -rf $VIRTUAL_VENV
+ echo $VIRTUAL_VENV
+ virtualenv $VIRTUAL_VENV
+ if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then
+ echo "Installation Error. Failed to create yardstick virtual env..."
+ exit 1
+ fi
+ source $VIRTUAL_VENV/bin/activate
+ bash ./install.sh
+ python setup.py install
+ popd
+
+ pushd .
+ echo "Copying yardstick sample conf & pod file to /etc/yardstick/nodes"
+ mkdir -p /etc/yardstick/nodes
+ cp "$REPO_DIR/etc/yardstick/yardstick.conf.sample" "/etc/yardstick/yardstick.conf"
+ cp "$REPO_DIR/etc/yardstick/nodes/pod.yaml.nsb.sample" "/etc/yardstick/nodes/"
+ popd
+}
+
+#
+# Install trex for TH setup
+#
+install_trex()
+{
+ TREX_DIR=$INSTALL_BIN_PATH/trex/scripts
+ if [ -d "$TREX_DIR" ]; then
+ echo "Trex v2.05already installed. Make sure it contains PYTHONPATH which is required to run TRex"
+ else
+ echo "Build TRex and installing Trex TG in $INSTALL_BIN_PATH/trex"
+ rm -rf ${TREX_DOWNLOAD##*/}
+ if [ ! -e ${TREX_DOWNLOAD##*/} ] ; then
+ wget $TREX_DOWNLOAD
+ fi
+ tar zxvf ${TREX_DOWNLOAD##*/}
+ pushd .
+ rm -rf trex
+ mkdir -p trex
+ mv v2.05 trex/scripts
+ rm -rf v2.05.tar.gz
+ cd trex/scripts/ko/src/
+ make
+ make install
+ # workaround trex module issue
+ touch "$REPO_DIR/trex/scripts/automation/trex_control_plane/stl/__init__.py"
+ cp "$REPO_DIR/trex/scripts/dpdk_nic_bind.py" "$INSTALL_BIN_PATH"
+ popd
+ fi
+ echo "Done."
+}
+
+install_dpdk()
+{
+ if [ -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then
+ echo "DPDK already installed make sure.. igb_uio is loaded."
+ else
+ echo "Build DPDK 16.07..."
+ pushd .
+ rm -rf ${DPDK_DOWNLOAD##*/}
+ rm -rf "$REPO_DIR/dpdk-16.07/"
+ if [ ! -e ${DPDK_DOWNLOAD##*/} ] ; then
+ wget ${DPDK_DOWNLOAD}
+ fi
+ unzip -o ${DPDK_DOWNLOAD##*/}
+
+ cd dpdk-16.07
+ make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
+ cd x86_64-native-linuxapp-gcc
+ echo "Enable Port Stats..."
+ sed -i -e 's/CONFIG_RTE_PORT_STATS_COLLECT=n/CONFIG_RTE_PORT_STATS_COLLECT=y/g' .config
+ sed -i -e 's/CONFIG_RTE_PORT_PCAP=n/CONFIG_RTE_PORT_PCAP=y/g' .config
+ sed -i -e 's/CONFIG_RTE_TABLE_STATS_COLLECT=n/CONFIG_RTE_TABLE_STATS_COLLECT=y/g' .config
+ sed -i -e 's/CONFIG_RTE_PIPELINE_STATS_COLLECT=n/CONFIG_RTE_PIPELINE_STATS_COLLECT=y/g' .config
+ make
+
+ echo "Load DPDK modules and setup hugepages"
+ modprobe uio
+ mkdir -p "/lib/modules/$(uname -r)/extra"
+ cp -r "kmod/igb_uio.ko" "/lib/modules/$(uname -r)/extra"
+ depmod -a
+ modprobe igb_uio
+ sh -c "echo 'uio\nigb_uio\n' > /etc/modules-load.d/nsb.conf"
+
+ HUGEPGSZ=$(cat < /proc/meminfo | grep Hugepagesize | cut -d : -f 2 | tr -d ' ')
+ Pages=16
+ if [[ "$HUGEPGSZ" = "2048kB" ]] ; then
+ Pages=16384
+ fi
+ grep nr_hugepages /etc/sysctl.conf
+ if [[ "$?" -eq '1' ]] ; then
+ sh -c "echo 'vm.nr_hugepages=$Pages' >> /etc/sysctl.conf"
+ fi
+ echo "echo $Pages > /sys/kernel/mm/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" > .echo_tmp
+ echo "Reserving hugepages"
+ sudo sh .echo_tmp
+ rm -f .echo_tmp
+
+ service procps start
+ echo "Creating /mnt/huge and mounting as hugetlbfs"
+ sudo mkdir -p /mnt/huge
+
+ grep -s '/mnt/huge' /proc/mounts > /dev/null
+ if [ $? -ne 0 ] ; then
+ sudo mount -t hugetlbfs nodev /mnt/huge
+ fi
+ popd
+ mv "$REPO_DIR/dpdk-16.07" "$INSTALL_BIN_PATH"
+ rm dpdk-16.07.zip
+ fi
+ export RTE_SDK="$INSTALL_BIN_PATH/dpdk-16.07"
+ export RTE_TARGET=x86_64-native-linuxapp-gcc
+
+ if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then
+ pushd .
+ echo "Building vPE VNF..."
+ cd $INSTALL_BIN_PATH/dpdk-16.07/examples/ip_pipeline/
+ make clean
+ make
+ cp build/ip_pipeline $INSTALL_BIN_PATH/vPE_vnf
+ popd
+ fi
+ echo "Done"
+}
+
+
+push_nsb_binary()
+{
+ if [ ! -d "$INSTALL_BIN_PATH/trex" ]; then
+ cp -fr "$REPO_DIR/trex" "$INSTALL_BIN_PATH"
+ fi
+ rm -rf "$REPO_DIR/trex"
+
+ if [ -d "$INSTALL_BIN_PATH/trex" ]; then
+ echo "Setup Environment variables for Test Harness...."
+ PYTHONPATH="$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane:$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane/stl"
+ PY_PATH=$(grep PYTHONPATH ~/.bash_profile)
+ if [ "$PY_PATH" = "" ] ; then
+ sh -c "echo export PYTHONPATH=$PYTHONPATH >> ~/.bash_profile" > /dev/null
+ else
+ echo "Your ~/.bash_profile already contains a PYTHONPATH definition."
+ echo "Make sure it contains $PYTHONPATH which is required to run TRex"
+ fi
+ fi
+ cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.sh" "$INSTALL_BIN_PATH"
+ cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.conf" "$INSTALL_BIN_PATH"
+ cp "$REPO_DIR/nsb_setup.sh" "$INSTALL_BIN_PATH"
+ echo "Done"
+}
+
+check_installed_files()
+{
+ if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then
+ echo "Installation Error. Failed to create yardstick virtual env..."
+ exit 1
+ fi
+
+ if [ ! -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then
+ echo "Installation Error. Failed to download and install dpdk-16.07..."
+ exit 1
+ fi
+
+ if [ ! -d "$INSTALL_BIN_PATH/trex" ]; then
+ echo "Installation Error. Failed to download and configure Trex"
+ exit 1
+ fi
+
+ if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then
+ echo "Installation Error. vPE VNF not present in install dir $INSTALL_BIN_PATH"
+ exit 1
+ fi
+}
+
+if [ "$1" == "dpdk" ]; then
+ install_libs
+ install_dpdk
+else
+ install_libs
+ install_yardstick
+ install_dpdk
+ install_trex
+ push_nsb_binary
+ check_installed_files
+clear
+echo "Installation completed..."
+echo "Virtual Environment : $INSTALL_BIN_PATH/yardstick_venv"
+echo "Please Refer README.NSB.rst document on how to get started on VNF testing."
+fi