summaryrefslogtreecommitdiffstats
path: root/nsb_setup.sh
diff options
context:
space:
mode:
Diffstat (limited to 'nsb_setup.sh')
-rwxr-xr-xnsb_setup.sh256
1 files changed, 30 insertions, 226 deletions
diff --git a/nsb_setup.sh b/nsb_setup.sh
index c11dc1038..85bd7b2c4 100755
--- a/nsb_setup.sh
+++ b/nsb_setup.sh
@@ -1,5 +1,5 @@
-#! /bin/bash
-# Copyright (c) 2016-2017 Intel Corporation
+#!/usr/bin/env bash
+# Copyright (c) 2017 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -13,237 +13,41 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-#
-# Change to yardstick directory ( <current-dir>/.. ), and export it as REPO_DIR
-#
-cd "$(dirname "${BASH_SOURCE[0]}")"
-export REPO_DIR=$PWD
-echo "------------------------------------------------------------------------------"
-echo " REPO_DIR exported as $REPO_DIR"
-echo "------------------------------------------------------------------------------"
-
-if [ "$(whoami)" != "root" ]; then
- echo "Must be root to run $0"
- exit 1;
-fi
-
-INSTALL_BIN_PATH="/opt/nsb_bin"
-TREX_VERSION="v2.28"
-TREX_DOWNLOAD="https://trex-tgn.cisco.com/trex/release/$TREX_VERSION.tar.gz"
-DPDK_DOWNLOAD="http://dpdk.org/browse/dpdk/snapshot/dpdk-16.07.zip"
-VIRTUAL_VENV="$INSTALL_BIN_PATH/yardstick_venv"
-
-#
-# Install libs needed for NSB
-#
-install_libs()
-{
- echo "Install libs needed to build and run NSB Testing..."
- apt-get update > /dev/null 2>&1
- pkg=(git build-essential python-dev virtualenv python-virtualenv virtualenv linux-headers-$(uname -r) unzip python-pip libpcap-dev cmake)
- for i in "${pkg[@]}"; do
+apt-get update > /dev/null 2>&1
+pkg=(python-pip build-essential libssl-dev libffi-dev python3-dev python-dev)
+for i in "${pkg[@]}"; do
dpkg-query -W --showformat='${Status}\n' "${i}"|grep "install ok installed"
if [ "$?" -eq "1" ]; then
apt-get -y install "${i}";
fi
- done
- echo "Done"
-}
-
-install_yardstick()
-{
- echo "Create install directory... $INSTALL_BIN_PATH"
- mkdir -p $INSTALL_BIN_PATH
- echo "Install yardstick dependencies and build Yardstick in venv..."
- pushd .
- rm -rf $VIRTUAL_VENV
- echo $VIRTUAL_VENV
- virtualenv $VIRTUAL_VENV
- if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then
- echo "Installation Error. Failed to create yardstick virtual env..."
- exit 1
- fi
- source $VIRTUAL_VENV/bin/activate
- bash ./install.sh
- python setup.py install
- popd
-
- pushd .
- echo "Copying yardstick sample conf & pod file to /etc/yardstick/nodes"
- mkdir -p /etc/yardstick/nodes
- cp "$REPO_DIR/etc/yardstick/yardstick.conf.sample" "/etc/yardstick/yardstick.conf"
- cp "$REPO_DIR/etc/yardstick/nodes/pod.yaml.nsb.sample" "/etc/yardstick/nodes/"
- popd
-}
-
-#
-# Install trex for TH setup
-#
-install_trex()
-{
- TREX_DIR=$INSTALL_BIN_PATH/trex/scripts
- if [ -d "$TREX_DIR" ]; then
- echo "Trex $TREX_VERSION already installed."
- else
- echo "Build TRex and installing Trex TG in $INSTALL_BIN_PATH/trex"
- rm -rf ${TREX_DOWNLOAD##*/}
- if [ ! -e ${TREX_DOWNLOAD##*/} ] ; then
- wget $TREX_DOWNLOAD
- fi
- tar zxvf ${TREX_DOWNLOAD##*/}
- pushd .
- rm -rf trex
- mkdir -p trex
- mv $TREX_VERSION trex/scripts
- rm -rf $TREX_VERSION.tar.gz
- cd trex/scripts/ko/src/
- make
- make install
- ln -s $TREX_DIR/automation/trex_control_plane $INSTALL_BIN_PATH/trex_client
- popd
- fi
- echo "Done."
-}
-
-install_dpdk()
-{
- if [ -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then
- echo "DPDK already installed make sure.. igb_uio is loaded."
- else
- echo "Build DPDK 16.07..."
- pushd .
- rm -rf ${DPDK_DOWNLOAD##*/}
- rm -rf "$REPO_DIR/dpdk-16.07/"
- if [ ! -e ${DPDK_DOWNLOAD##*/} ] ; then
- wget ${DPDK_DOWNLOAD}
- fi
- unzip -o ${DPDK_DOWNLOAD##*/}
-
- cd dpdk-16.07
- make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
- cd x86_64-native-linuxapp-gcc
- echo "Enable Port Stats..."
- sed -i -e 's/CONFIG_RTE_PORT_STATS_COLLECT=n/CONFIG_RTE_PORT_STATS_COLLECT=y/g' .config
- sed -i -e 's/CONFIG_RTE_PORT_PCAP=n/CONFIG_RTE_PORT_PCAP=y/g' .config
- sed -i -e 's/CONFIG_RTE_TABLE_STATS_COLLECT=n/CONFIG_RTE_TABLE_STATS_COLLECT=y/g' .config
- sed -i -e 's/CONFIG_RTE_PIPELINE_STATS_COLLECT=n/CONFIG_RTE_PIPELINE_STATS_COLLECT=y/g' .config
- make
-
- echo "Load DPDK modules and setup hugepages"
- modprobe uio
- mkdir -p "/lib/modules/$(uname -r)/extra"
- cp -r "kmod/igb_uio.ko" "/lib/modules/$(uname -r)/extra"
- depmod -a
- modprobe igb_uio
- sh -c "echo 'uio\nigb_uio\n' > /etc/modules-load.d/nsb.conf"
-
- HUGEPGSZ=$(cat < /proc/meminfo | grep Hugepagesize | cut -d : -f 2 | tr -d ' ')
- Pages=16
- if [[ "$HUGEPGSZ" = "2048kB" ]] ; then
- Pages=16384
- fi
- grep nr_hugepages /etc/sysctl.conf
- if [[ "$?" -eq '1' ]] ; then
- sh -c "echo 'vm.nr_hugepages=$Pages' >> /etc/sysctl.conf"
- fi
- echo "echo $Pages > /sys/kernel/mm/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" > .echo_tmp
- echo "Reserving hugepages"
- sudo sh .echo_tmp
- rm -f .echo_tmp
-
- service procps start
- echo "Creating /mnt/huge and mounting as hugetlbfs"
- sudo mkdir -p /mnt/huge
-
- grep -s '/mnt/huge' /proc/mounts > /dev/null
- if [ $? -ne 0 ] ; then
- sudo mount -t hugetlbfs nodev /mnt/huge
- fi
- popd
- mv "$REPO_DIR/dpdk-16.07" "$INSTALL_BIN_PATH"
- rm dpdk-16.07.zip
- fi
- export RTE_SDK="$INSTALL_BIN_PATH/dpdk-16.07"
- export RTE_TARGET=x86_64-native-linuxapp-gcc
-
- if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then
- pushd .
- echo "Building vPE VNF..."
- cd $INSTALL_BIN_PATH/dpdk-16.07/examples/ip_pipeline/
- make clean
- make
- cp build/ip_pipeline $INSTALL_BIN_PATH/vPE_vnf
- popd
- fi
- echo "Done"
-}
-
-
-push_nsb_binary()
-{
- if [ ! -d "$INSTALL_BIN_PATH/trex/scripts" ]; then
- cp -fr "$REPO_DIR/trex" "$INSTALL_BIN_PATH"
- fi
- rm -rf "$REPO_DIR/trex"
+done
- if [ -d "$INSTALL_BIN_PATH/trex" ]; then
- echo "Setup Environment variables for Test Harness...."
- PYTHONPATH="$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane:$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane/stl"
- PY_PATH=$(grep PYTHONPATH ~/.bash_profile)
- if [ "$PY_PATH" = "" ] ; then
- sh -c "echo export PYTHONPATH=$PYTHONPATH >> ~/.bash_profile" > /dev/null
- else
- echo "Your ~/.bash_profile already contains a PYTHONPATH definition."
- echo "Make sure it contains $PYTHONPATH which is required to run TRex"
- fi
- fi
- cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.sh" "$INSTALL_BIN_PATH"
- cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.conf" "$INSTALL_BIN_PATH"
- cp "$REPO_DIR/nsb_setup.sh" "$INSTALL_BIN_PATH"
-
- # Get "dpdk-devbind.py" to find the ports for VNF to run
- wget http://dpdk.org/browse/dpdk/plain/usertools/dpdk-devbind.py?h=v17.05 -O dpdk-devbind.py
- chmod 777 dpdk-devbind.py
- mv dpdk-devbind.py "$INSTALL_BIN_PATH"
- ln "$INSTALL_BIN_PATH"/dpdk-devbind.py "$INSTALL_BIN_PATH"/dpdk_nic_bind.py
- echo "Done"
-}
+pip install ansible==2.2.2.0 shade==1.17.0 docker-py==1.10.6
-check_installed_files()
-{
- if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then
- echo "Installation Error. Failed to create yardstick virtual env..."
- exit 1
- fi
+if [ $# -eq 1 ]; then
+ extra_args="-e openrc_file=$1"
+ OPENRC=$1
+ source "${OPENRC}"
+ CONTROLLER_IP=$(echo ${OS_AUTH_URL} | sed -ne "s/http:\/\/\(.*\):.*/\1/p")
+ export no_proxy="localhost,127.0.0.1,${CONTROLLER_IP},$no_proxy"
+fi
- if [ ! -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then
- echo "Installation Error. Failed to download and install dpdk-16.07..."
- exit 1
- fi
+if [ "$http_proxy" != "" ] || [ "$https_proxy" != "" ]; then
+ extra_args="${extra_args} -e @/tmp/proxy.yml"
- if [ ! -d "$INSTALL_BIN_PATH/trex" ]; then
- echo "Installation Error. Failed to download and configure Trex"
- exit 1
- fi
+ cat <<EOF > /tmp/proxy.yml
+---
+proxy_env:
+ http_proxy: $http_proxy
+ https_proxy: $https_proxy
+ no_proxy: $no_proxy
+EOF
+fi
- if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then
- echo "Installation Error. vPE VNF not present in install dir $INSTALL_BIN_PATH"
- exit 1
- fi
-}
+ANSIBLE_SCRIPTS="ansible"
-if [ "$1" == "dpdk" ]; then
- install_libs
- install_dpdk
-else
- install_libs
- install_yardstick
- install_dpdk
- install_trex
- push_nsb_binary
- check_installed_files
-clear
-echo "Installation completed..."
-echo "Virtual Environment : $INSTALL_BIN_PATH/yardstick_venv"
-echo "Please refer to Chapter 13 of the Yardstick User Guide for how to get started with VNF testing."
-fi
+cd ${ANSIBLE_SCRIPTS} &&\
+ansible-playbook \
+ -e img_modify_playbook='ubuntu_server_cloudimg_modify_samplevnfs.yml' \
+ -e YARD_IMG_ARCH='amd64' ${extra_args}\
+ -i yardstick-install-inventory.ini nsb_setup.yml