diff options
Diffstat (limited to 'docs')
18 files changed, 728 insertions, 98 deletions
diff --git a/docs/testing/developer/devguide/devguide_nsb_prox.rst b/docs/testing/developer/devguide/devguide_nsb_prox.rst index fc533b2cf..22628413b 100755 --- a/docs/testing/developer/devguide/devguide_nsb_prox.rst +++ b/docs/testing/developer/devguide/devguide_nsb_prox.rst @@ -251,9 +251,11 @@ Now let's examine the components of the file in detail In this case it is ``handle_l2fwd-2.cfg`` A number of additional parameters can be added. This example - is taken from VPE:: + is for VPE:: options: + interface_speed_gbps: 10 + vnf__0: prox_path: /opt/nsb_bin/prox prox_config: ``configs/handle_vpe-4.cfg`` @@ -267,6 +269,12 @@ Now let's examine the components of the file in detail ``configs/vpe_rules.lua`` : ```` prox_generate_parameter: True + ``interface_speed_gbps`` - this specifies the speed of the interface + in Gigabits Per Second. This is used to calculate pps(packets per second). + If the interfaces are of different speeds, then this specifies the speed + of the slowest interface. This parameter is optional. If omitted the + interface speed defaults to 10Gbps. + ``prox_files`` - this specified that a number of addition files need to be provided for the test to run correctly. This files could provide routing information,hashing information or a diff --git a/docs/testing/user/userguide/08-api.rst b/docs/testing/user/userguide/08-api.rst index 92fa408c8..79f5d64be 100644 --- a/docs/testing/user/userguide/08-api.rst +++ b/docs/testing/user/userguide/08-api.rst @@ -35,7 +35,7 @@ Prepare Yardstick test environment Example:: { - 'action': 'prepareYardstickEnv' + 'action': 'prepare_env' } This is an asynchronous API. You need to call /yardstick/asynctask API to get the task result. @@ -45,7 +45,7 @@ Start and config an InfluxDB docker container Example:: { - 'action': 'createInfluxDBContainer' + 'action': 'create_influxdb' } This is an asynchronous API. You need to call /yardstick/asynctask API to get the task result. @@ -55,7 +55,7 @@ Start and config a Grafana docker container Example:: { - 'action': 'createGrafanaContainer' + 'action': 'create_grafana' } This is an asynchronous API. You need to call /yardstick/asynctask API to get the task result. @@ -73,10 +73,15 @@ Method: GET Get the status of asynchronous tasks Example:: - http://localhost:8888/yardstick/asynctask?task_id=3f3f5e03-972a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/yardstick/asynctask?task_id=3f3f5e03-972a-4847-a5f8-154f1b31db8c The returned status will be 0(running), 1(finished) and 2(failed). +NOTE:: + + <SERVER IP>: The ip of the host where you start your yardstick container + <PORT>: The outside port of port mapping which set when you start start yardstick container + /yardstick/testcases ^^^^^^^^^^^^^^^^^^^^ @@ -90,7 +95,7 @@ Method: GET Get a list of released test cases Example:: - http://localhost:8888/yardstick/testcases + http://<SERVER IP>:<PORT>/yardstick/testcases /yardstick/testcases/release/action @@ -106,10 +111,10 @@ Run a released test case Example:: { - 'action': 'runTestCase', + 'action': 'run_test_case', 'args': { 'opts': {}, - 'testcase': 'tc002' + 'testcase': 'opnfv_yardstick_tc002' } } @@ -129,7 +134,7 @@ Run a sample test case Example:: { - 'action': 'runTestCase', + 'action': 'run_test_case', 'args': { 'opts': {}, 'testcase': 'ping' @@ -151,7 +156,7 @@ Method: GET Get the documentation of a certain test case Example:: - http://localhost:8888/yardstick/taskcases/opnfv_yardstick_tc002/docs + http://<SERVER IP>:<PORT>/yardstick/taskcases/opnfv_yardstick_tc002/docs /yardstick/testsuites/action @@ -167,10 +172,10 @@ Run a test suite Example:: { - 'action': 'runTestSuite', + 'action': 'run_test_suite', 'args': { 'opts': {}, - 'testcase': 'smoke' + 'testsuite': 'opnfv_smoke' } } @@ -178,6 +183,7 @@ This is an asynchronous API. You need to call /yardstick/results to get the resu /yardstick/tasks/<task_id>/log +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to get the real time log of test case execution. @@ -188,7 +194,7 @@ Method: GET Get real time of test case execution Example:: - http://localhost:8888/yardstick/tasks/14795be8-f144-4f54-81ce-43f4e3eab33f/log?index=0 + http://<SERVER IP>:<PORT>/yardstick/tasks/14795be8-f144-4f54-81ce-43f4e3eab33f/log?index=0 /yardstick/results @@ -203,17 +209,18 @@ Method: GET Get test results of one task Example:: - http://localhost:8888/yardstick/results?task_id=3f3f5e03-972a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/yardstick/results?task_id=3f3f5e03-972a-4847-a5f8-154f1b31db8c This API will return a list of test case result -/api/v2/yardstick/openrcs/action +/api/v2/yardstick/openrcs +^^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API provides functionality of handling OpenStack credential file (openrc). For Euphrates, it supports: 1. Upload an openrc file for an OpenStack environment; -2. Update an openrc file; +2. Update an openrc; 3. Get openrc file information; 4. Delete an openrc file. @@ -260,12 +267,21 @@ Example:: } +/api/v2/yardstick/openrcs/<openrc_id> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API provides functionality of handling OpenStack credential file (openrc). For Euphrates, it supports: + +1. Get openrc file information; +2. Delete an openrc file. + + METHOD: GET Get openrc file information Example:: - http://localhost:8888/api/v2/yardstick/openrcs/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/openrcs/5g6g3e02-155a-4847-a5f8-154f1b31db8c METHOD: DELETE @@ -274,16 +290,15 @@ METHOD: DELETE Delete openrc file Example:: - http://localhost:8888/api/v2/yardstick/openrcs/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/openrcs/5g6g3e02-155a-4847-a5f8-154f1b31db8c -/api/v2/yardstick/pods/action +/api/v2/yardstick/pods +^^^^^^^^^^^^^^^^^^^^^^ Description: This API provides functionality of handling Yardstick pod file (pod.yaml). For Euphrates, it supports: 1. Upload a pod file; -2. Get pod file information; -3. Delete an openrc file. Which API to call will depend on the parameters. @@ -303,12 +318,20 @@ Example:: } +/api/v2/yardstick/pods/<pod_id> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API provides functionality of handling Yardstick pod file (pod.yaml). For Euphrates, it supports: + +1. Get pod file information; +2. Delete an openrc file. + METHOD: GET Get pod file information Example:: - http://localhost:8888/api/v2/yardstick/pods/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/pods/5g6g3e02-155a-4847-a5f8-154f1b31db8c METHOD: DELETE @@ -316,16 +339,15 @@ METHOD: DELETE Delete openrc file Example:: - http://localhost:8888/api/v2/yardstick/pods/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/pods/5g6g3e02-155a-4847-a5f8-154f1b31db8c -/api/v2/yardstick/images/action +/api/v2/yardstick/images +^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to do some work related to Yardstick VM images. For Euphrates, it supports: 1. Load Yardstick VM images; -2. Get image's information; -3. Delete images. Which API to call will depend on the parameters. @@ -337,16 +359,27 @@ Load VM images Example:: { - 'action': 'load_images' + 'action': 'load_image', + 'args': { + 'name': 'yardstick-image' + } } +/api/v2/yardstick/images/<image_id> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to do some work related to Yardstick VM images. For Euphrates, it supports: + +1. Get image's information; +2. Delete images + METHOD: GET Get image information Example:: - http://localhost:8888/api/v2/yardstick/images/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/images/5g6g3e02-155a-4847-a5f8-154f1b31db8c METHOD: DELETE @@ -354,19 +387,15 @@ METHOD: DELETE Delete images Example:: - http://localhost:8888/api/v2/yardstick/images/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/images/5g6g3e02-155a-4847-a5f8-154f1b31db8c -/api/v2/yardstick/tasks/action +/api/v2/yardstick/tasks +^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to do some work related to yardstick tasks. For Euphrates, it supports: 1. Create a Yardstick task; -2. run a Yardstick task; -3. Add a test case to a task; -4. Add a test suite to a task; -5. Get a tasks' information; -6. Delete a task. Which API to call will depend on the parameters. @@ -386,20 +415,35 @@ Example:: } +/api/v2/yardstick/tasks/<task_id> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to do some work related to yardstick tasks. For Euphrates, it supports: + +1. Add a environment to a task +2. Add a test case to a task; +3. Add a test suite to a task; +4. run a Yardstick task; +5. Get a tasks' information; +6. Delete a task. + + METHOD: PUT +Add a environment to a task -Run a task Example:: { - 'action': 'run' + 'action': 'add_environment', + 'args': { + 'environment_id': 'e3cadbbb-0419-4fed-96f1-a232daa0422a' + } } METHOD: PUT - Add a test case to a task Example:: @@ -412,8 +456,8 @@ Example:: } -METHOD: PUT +METHOD: PUT Add a test suite to a task Example:: @@ -427,29 +471,41 @@ Example:: } +METHOD: PUT + +Run a task + +Example:: + + { + 'action': 'run' + } + + + METHOD: GET Get a task's information Example:: - http://localhost:8888/api/v2/yardstick/tasks/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/tasks/5g6g3e02-155a-4847-a5f8-154f1b31db8c METHOD: DELETE Delete a task + Example:: - http://localhost:8888/api/v2/yardstick/tasks/5g6g3e02-155a-4847-a5f8-154f1b31db8c + http://<SERVER IP>:<PORT>/api/v2/yardstick/tasks/5g6g3e02-155a-4847-a5f8-154f1b31db8c -/api/v2/yardstick/testcases/action +/api/v2/yardstick/testcases +^^^^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to do some work related to yardstick testcases. For Euphrates, it supports: 1. Upload a test case; 2. Get all released test cases' information; -3. Get a certain released test case's information; -4. Delete a test case. Which API to call will depend on the parameters. @@ -474,16 +530,24 @@ METHOD: GET Get all released test cases' information Example:: - http://localhost:8888/api/v2/yardstick/testcases + http://<SERVER IP>:<PORT>/api/v2/yardstick/testcases + + +/api/v2/yardstick/testcases/<case_name> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to do some work related to yardstick testcases. For Euphrates, it supports: +1. Get certain released test case's information; +2. Delete a test case. METHOD: GET -Get a certain released test case's information +Get certain released test case's information Example:: - http://localhost:8888/api/v2/yardstick/testcases/opnfv_yardstick_tc002 + http://<SERVER IP>:<PORT>/api/v2/yardstick/testcases/opnfv_yardstick_tc002 METHOD: DELETE @@ -491,17 +555,16 @@ METHOD: DELETE Delete a certain test case Example:: - http://localhost:8888/api/v2/yardstick/testcases/opnfv_yardstick_tc002 + http://<SERVER IP>:<PORT>/api/v2/yardstick/testcases/opnfv_yardstick_tc002 -/api/v2/yardstick/testsuites/action +/api/v2/yardstick/testsuites +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to do some work related to yardstick test suites. For Euphrates, it supports: 1. Create a test suite; -2. Get a certain test suite's information; -3. Get all test suites; -4. Delete a test case. +2. Get all test suites; Which API to call will depend on the parameters. @@ -526,19 +589,27 @@ Example:: METHOD: GET -Get a certain test suite's information +Get all test suite Example:: - http://localhost:8888/api/v2/yardstick/testsuites/<suite_name> + http://<SERVER IP>:<PORT>/api/v2/yardstick/testsuites + + +/api/v2/yardstick/testsuites +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to do some work related to yardstick test suites. For Euphrates, it supports: +1. Get certain test suite's information; +2. Delete a test case. METHOD: GET -Get all test suite +Get certain test suite's information Example:: - http://localhost:8888/api/v2/yardstick/testsuites + http://<SERVER IP>:<PORT>/api/v2/yardstick/testsuites/<suite_name> METHOD: DELETE @@ -547,17 +618,16 @@ METHOD: DELETE Delete a certain test suite Example:: - http://localhost:8888/api/v2/yardstick/testsuites/<suite_name> + http://<SERVER IP>:<PORT>/api/v2/yardstick/testsuites/<suite_name> -/api/v2/yardstick/projects/action +/api/v2/yardstick/projects +^^^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to do some work related to yardstick test projects. For Euphrates, it supports: 1. Create a Yardstick project; -2. Get a certain project's information; -3. Get all projects; -4. Delete a project. +2. Get all projects; Which API to call will depend on the parameters. @@ -579,19 +649,27 @@ Example:: METHOD: GET -Get a certain project's information +Get all projects' information Example:: - http://localhost:8888/api/v2/yardstick/projects/<project_id> + http://<SERVER IP>:<PORT>/api/v2/yardstick/projects + +/api/v2/yardstick/projects +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to do some work related to yardstick test projects. For Euphrates, it supports: + +1. Get certain project's information; +2. Delete a project. METHOD: GET -Get all projects' information +Get certain project's information Example:: - http://localhost:8888/api/v2/yardstick/projects + http://<SERVER IP>:<PORT>/api/v2/yardstick/projects/<project_id> METHOD: DELETE @@ -600,17 +678,16 @@ METHOD: DELETE Delete a certain project Example:: - http://localhost:8888/api/v2/yardstick/projects/<project_id> + http://<SERVER IP>:<PORT>/api/v2/yardstick/projects/<project_id> -/api/v2/yardstick/containers/action +/api/v2/yardstick/containers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Description: This API is used to do some work related to Docker containers. For Euphrates, it supports: 1. Create a Grafana Docker container; 2. Create an InfluxDB Docker container; -3. Get a certain container's information; -4. Delete a container. Which API to call will depend on the parameters. @@ -643,13 +720,21 @@ Example:: } +/api/v2/yardstick/containers/<container_id> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to do some work related to Docker containers. For Euphrates, it supports: + +1. Get certain container's information; +2. Delete a container. + METHOD: GET -Get a certain container's information +Get certain container's information Example:: - http://localhost:8888/api/v2/yardstick/containers/<container_id> + http://<SERVER IP>:<PORT>/api/v2/yardstick/containers/<container_id> METHOD: DELETE @@ -658,4 +743,4 @@ METHOD: DELETE Delete a certain container Example:: - http://localhost:8888/api/v2/yardstick/containers/<container_id> + http://<SERVER IP>:<PORT>/api/v2/yardstick/containers/<container_id> diff --git a/docs/testing/user/userguide/11-nsb-overview.rst b/docs/testing/user/userguide/11-nsb-overview.rst index 8ce90f65d..332dba47d 100644 --- a/docs/testing/user/userguide/11-nsb-overview.rst +++ b/docs/testing/user/userguide/11-nsb-overview.rst @@ -197,7 +197,9 @@ VNFs supported for chracterization: 1. CGNAPT - Carrier Grade Network Address and port Translation 2. vFW - Virtual Firewall 3. vACL - Access Control List -5. Prox - Packet pROcessing eXecution engine: - - VNF can act as Drop, Basic Forwarding (no touch), L2 Forwarding (change MAC), GRE encap/decap, Load balance based on packet fields, Symmetric load balancing, +4. Prox - Packet pROcessing eXecution engine: + - VNF can act as Drop, Basic Forwarding (no touch), + L2 Forwarding (change MAC), GRE encap/decap, Load balance based on + packet fields, Symmetric load balancing - QinQ encap/decap IPv4/IPv6, ARP, QoS, Routing, Unmpls, Policing, ACL -6. UDP_Replay +5. UDP_Replay diff --git a/docs/testing/user/userguide/12-nsb_installation.rst b/docs/testing/user/userguide/12-nsb_installation.rst index a584ca231..5631c6578 100644 --- a/docs/testing/user/userguide/12-nsb_installation.rst +++ b/docs/testing/user/userguide/12-nsb_installation.rst @@ -116,11 +116,13 @@ Configure the network proxy, either using the environment variables or setting the global environment file: .. code-block:: ini + cat /etc/environment http_proxy='http://proxy.company.com:port' https_proxy='http://proxy.company.com:port' .. code-block:: console + export http_proxy='http://proxy.company.com:port' export https_proxy='http://proxy.company.com:port' @@ -128,6 +130,7 @@ The last step is to modify the Yardstick installation inventory, used by Ansible: .. code-block:: ini + cat ./ansible/yardstick-install-inventory.ini [jumphost] localhost ansible_connection=local @@ -753,14 +756,292 @@ Update "contexts" section gateway_ip: '152.16.100.20' +Network Service Benchmarking - OpenStack with SR-IOV support +------------------------------------------------------------ + +This section describes how to run a Sample VNF test case, using Heat context, +with SR-IOV. It also covers how to install OpenStack in Ubuntu 16.04, using +DevStack, with SR-IOV support. + + +Single node OpenStack setup with external TG +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: console + + +----------------------------+ + |OpenStack(DevStack) | + | | + | +--------------------+ | + | |sample-VNF VM | | + | | | | + | | DUT | | + | | (VNF) | | + | | | | + | +--------+ +--------+ | + | | VF NIC | | VF NIC | | + | +-----+--+--+----+---+ | + | ^ ^ | + | | | | + +----------+ +---------+----------+-------+ + | | | VF0 VF1 | + | | | ^ ^ | + | | | | SUT | | + | TG | (PF0)<----->(PF0) +---------+ | | + | | | | | + | | (PF1)<----->(PF1) +--------------------+ | + | | | | + +----------+ +----------------------------+ + trafficgen_1 host + + +Host pre-configuration +###################### + +.. warning:: The following configuration requires sudo access to the system. Make + sure that your user have the access. + +Enable the Intel VT-d or AMD-Vi extension in the BIOS. Some system manufacturers +disable this extension by default. + +Activate the Intel VT-d or AMD-Vi extension in the kernel by modifying the GRUB +config file ``/etc/default/grub``. + +For the Intel platform: + +.. code:: bash + + ... + GRUB_CMDLINE_LINUX_DEFAULT="intel_iommu=on" + ... + +For the AMD platform: + +.. code:: bash + + ... + GRUB_CMDLINE_LINUX_DEFAULT="amd_iommu=on" + ... + +Update the grub configuration file and restart the system: + +.. warning:: The following command will reboot the system. + +.. code:: bash + + sudo update-grub + sudo reboot + +Make sure the extension has been enabled: + +.. code:: bash + + sudo journalctl -b 0 | grep -e IOMMU -e DMAR + + Feb 06 14:50:14 hostname kernel: ACPI: DMAR 0x000000006C406000 0001E0 (v01 INTEL S2600WF 00000001 INTL 20091013) + Feb 06 14:50:14 hostname kernel: DMAR: IOMMU enabled + Feb 06 14:50:14 hostname kernel: DMAR: Host address width 46 + Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000d37fc000 flags: 0x0 + Feb 06 14:50:14 hostname kernel: DMAR: dmar0: reg_base_addr d37fc000 ver 1:0 cap 8d2078c106f0466 ecap f020de + Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000e0ffc000 flags: 0x0 + Feb 06 14:50:14 hostname kernel: DMAR: dmar1: reg_base_addr e0ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de + Feb 06 14:50:14 hostname kernel: DMAR: DRHD base: 0x000000ee7fc000 flags: 0x0 + +Setup system proxy (if needed). Add the following configuration into the +``/etc/environment`` file: + +.. note:: The proxy server name/port and IPs should be changed according to + actuall/current proxy configuration in the lab. + +.. code:: bash + + export http_proxy=http://proxy.company.com:port + export https_proxy=http://proxy.company.com:port + export ftp_proxy=http://proxy.company.com:port + export no_proxy=localhost,127.0.0.1,company.com,<IP-OF-HOST1>,<IP-OF-HOST2>,... + export NO_PROXY=localhost,127.0.0.1,company.com,<IP-OF-HOST1>,<IP-OF-HOST2>,... + +Upgrade the system: + +.. code:: bash + + sudo -EH apt-get update + sudo -EH apt-get upgrade + sudo -EH apt-get dist-upgrade + +Install dependencies needed for the DevStack + +.. code:: bash + + sudo -EH apt-get install python + sudo -EH apt-get install python-dev + sudo -EH apt-get install python-pip + +Setup SR-IOV ports on the host: + +.. note:: The ``enp24s0f0``, ``enp24s0f0`` are physical function (PF) interfaces + on a host and ``enp24s0f3`` is a public interface used in OpenStack, so the + interface names should be changed according to the HW environment used for + testing. + +.. code:: bash + + sudo ip link set dev enp24s0f0 up + sudo ip link set dev enp24s0f1 up + sudo ip link set dev enp24s0f3 up + + # Create VFs on PF + echo 2 | sudo tee /sys/class/net/enp24s0f0/device/sriov_numvfs + echo 2 | sudo tee /sys/class/net/enp24s0f1/device/sriov_numvfs + + +DevStack installation +##################### + +Use official `Devstack <https://docs.openstack.org/devstack/pike/>`_ +documentation to install OpenStack on a host. Please note, that stable +``pike`` branch of devstack repo should be used during the installation. +The required `local.conf`` configuration file are described below. + +DevStack configuration file: + +.. note:: Update the devstack configuration file by replacing angluar brackets + with a short description inside. + +.. note:: Use ``lspci | grep Ether`` & ``lspci -n | grep <PCI ADDRESS>`` + commands to get device and vendor id of the virtual function (VF). + +.. literalinclude:: code/single-devstack-local.conf + :language: console + +Start the devstack installation on a host. + + +TG host configuration +##################### + +Yardstick automatically install and configure Trex traffic generator on TG +host based on provided POD file (see below). Anyway, it's recommended to check +the compatibility of the installed NIC on the TG server with software Trex using +the manual at https://trex-tgn.cisco.com/trex/doc/trex_manual.html. + + +Run the Sample VNF test case +############################ + +There is an example of Sample VNF test case ready to be executed in an +OpenStack environment with SR-IOV support: ``samples/vnf_samples/nsut/vfw/ +tc_heat_sriov_external_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``. + +Install yardstick using `Install Yardstick (NSB Testing)`_ steps for OpenStack +context. + +Create pod file for TG in the yardstick repo folder located in the yardstick +container: + +.. note:: The ``ip``, ``user``, ``password`` and ``vpci`` fields show be changed + according to HW environment used for the testing. Use ``lshw -c network -businfo`` + command to get the PF PCI address for ``vpci`` field. + +.. literalinclude:: code/single-yardstick-pod.conf + :language: console + +Run the Sample vFW RFC2544 SR-IOV TC (``samples/vnf_samples/nsut/vfw/ +tc_heat_sriov_external_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``) in the heat +context using steps described in `NS testing - using yardstick CLI`_ section. + + +Multi node OpenStack TG and VNF setup (two nodes) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: console + + +----------------------------+ +----------------------------+ + |OpenStack(DevStack) | |OpenStack(DevStack) | + | | | | + | +--------------------+ | | +--------------------+ | + | |sample-VNF VM | | | |sample-VNF VM | | + | | | | | | | | + | | TG | | | | DUT | | + | | trafficgen_1 | | | | (VNF) | | + | | | | | | | | + | +--------+ +--------+ | | +--------+ +--------+ | + | | VF NIC | | VF NIC | | | | VF NIC | | VF NIC | | + | +----+---+--+----+---+ | | +-----+--+--+----+---+ | + | ^ ^ | | ^ ^ | + | | | | | | | | + +--------+-----------+-------+ +---------+----------+-------+ + | VF0 VF1 | | VF0 VF1 | + | ^ ^ | | ^ ^ | + | | SUT2 | | | | SUT1 | | + | | +-------+ (PF0)<----->(PF0) +---------+ | | + | | | | | | + | +-------------------+ (PF1)<----->(PF1) +--------------------+ | + | | | | + +----------------------------+ +----------------------------+ + host2 (compute) host1 (controller) + + +Controller/Compute pre-configuration +#################################### + +Pre-configuration of the controller and compute hosts are the same as +described in `Host pre-configuration`_ section. Follow the steps in the section. + + +DevStack configuration +###################### + +Use official `Devstack <https://docs.openstack.org/devstack/pike/>`_ +documentation to install OpenStack on a host. Please note, that stable +``pike`` branch of devstack repo should be used during the installation. +The required `local.conf`` configuration file are described below. + +.. note:: Update the devstack configuration files by replacing angluar brackets + with a short description inside. + +.. note:: Use ``lspci | grep Ether`` & ``lspci -n | grep <PCI ADDRESS>`` + commands to get device and vendor id of the virtual function (VF). + +DevStack configuration file for controller host: + +.. literalinclude:: code/multi-devstack-controller-local.conf + :language: console + +DevStack configuration file for compute host: + +.. literalinclude:: code/multi-devstack-compute-local.conf + :language: console + +Start the devstack installation on the controller and compute hosts. + + +Run the sample vFW TC +##################### + +Install yardstick using `Install Yardstick (NSB Testing)`_ steps for OpenStack +context. + +Run sample vFW RFC2544 SR-IOV TC (``samples/vnf_samples/nsut/vfw/ +tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``) in the heat +context using steps described in `NS testing - using yardstick CLI`_ section +and the following yardtick command line arguments: + +.. code:: bash + + yardstick -d task start --task-args='{"provider": "sriov"}' \ + samples/vnf_samples/nsut/vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml + + Enabling other Traffic generator -------------------------------- IxLoad: ^^^^^^^ -1. Software needed: IxLoadAPI ``<IxLoadTclApi verson>Linux64.bin.tgz and <IxOS version>Linux64.bin.tar.gz`` (Download from ixia support site) - Install - ``<IxLoadTclApi verson>Linux64.bin.tgz & <IxOS version>Linux64.bin.tar.gz`` +1. Software needed: IxLoadAPI ``<IxLoadTclApi verson>Linux64.bin.tgz and <IxOS + version>Linux64.bin.tar.gz`` (Download from ixia support site) + Install - ``<IxLoadTclApi verson>Linux64.bin.tgz & <IxOS version>Linux64.bin.tar.gz`` If the installation was not done inside the container, after installing the IXIA client, check /opt/ixia/ixload/<ver>/bin/ixloadpython and make sure you can run this cmd inside the yardstick container. Usually user is required to copy or link /opt/ixia/python/<ver>/bin/ixiapython @@ -818,9 +1099,9 @@ IxLoad: - Connect to the IxLoad machine using RDP - Go to: - ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` + ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` or - ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"`` + ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"`` 4. Create a folder "Results" in c:\ and share the folder on the network. diff --git a/docs/testing/user/userguide/code/multi-devstack-compute-local.conf b/docs/testing/user/userguide/code/multi-devstack-compute-local.conf new file mode 100644 index 000000000..b0b3cc5d4 --- /dev/null +++ b/docs/testing/user/userguide/code/multi-devstack-compute-local.conf @@ -0,0 +1,53 @@ +[[local|localrc]] +HOST_IP=<HOST_IP_ADDRESS> +MYSQL_PASSWORD=password +DATABASE_PASSWORD=password +RABBIT_PASSWORD=password +ADMIN_PASSWORD=password +SERVICE_PASSWORD=password +HORIZON_PASSWORD=password +# Controller node +SERVICE_HOST=<CONTROLLER_IP_ADDRESS> +MYSQL_HOST=$SERVICE_HOST +RABBIT_HOST=$SERVICE_HOST +GLANCE_HOSTPORT=$SERVICE_HOST:9292 + +# Internet access. +RECLONE=False +PIP_UPGRADE=True +IP_VERSION=4 + +# Neutron +enable_plugin neutron https://git.openstack.org/openstack/neutron.git stable/pike + +# Services +ENABLED_SERVICES=n-cpu,rabbit,q-agt,placement-api,q-sriov-agt + +# Neutron Options +PUBLIC_INTERFACE=<PUBLIC INTERFACE> + +# ML2 Configuration +Q_PLUGIN=ml2 +Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,sriovnicswitch +Q_ML2_PLUGIN_TYPE_DRIVERS=vlan,flat,local,vxlan,gre,geneve + +# Open vSwitch provider networking configuration +PHYSICAL_DEVICE_MAPPINGS=physnet1:<PF0_IFNAME>,physnet2:<PF1_IFNAME> + + +[[post-config|$NOVA_CONF]] +[DEFAULT] +scheduler_default_filters=RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,PciPassthroughFilter +# Whitelist PCI devices +pci_passthrough_whitelist = {\\"devname\\": \\"<PF0_IFNAME>\\", \\"physical_network\\": \\"physnet1\\" } +pci_passthrough_whitelist = {\\"devname\\": \\"<PF1_IFNAME>\\", \\"physical_network\\": \\"physnet2\\" } + +[libvirt] +cpu_mode = host-model + + +# ML2 plugin bits for SR-IOV enablement of Intel Corporation XL710/X710 Virtual Function +[[post-config|/$Q_PLUGIN_CONF_FILE]] +[ml2_sriov] +agent_required = True +supported_pci_vendor_devs = <VF_DEV_ID:VF_VEN_ID> diff --git a/docs/testing/user/userguide/code/multi-devstack-controller-local.conf b/docs/testing/user/userguide/code/multi-devstack-controller-local.conf new file mode 100644 index 000000000..fb61cdcbd --- /dev/null +++ b/docs/testing/user/userguide/code/multi-devstack-controller-local.conf @@ -0,0 +1,64 @@ +[[local|localrc]] +HOST_IP=<HOST_IP_ADDRESS> +ADMIN_PASSWORD=password +MYSQL_PASSWORD=$ADMIN_PASSWORD +DATABASE_PASSWORD=$ADMIN_PASSWORD +RABBIT_PASSWORD=$ADMIN_PASSWORD +SERVICE_PASSWORD=$ADMIN_PASSWORD +HORIZON_PASSWORD=$ADMIN_PASSWORD +# Controller node +SERVICE_HOST=$HOST_IP +MYSQL_HOST=$SERVICE_HOST +RABBIT_HOST=$SERVICE_HOST +GLANCE_HOSTPORT=$SERVICE_HOST:9292 + +# Internet access. +RECLONE=False +PIP_UPGRADE=True +IP_VERSION=4 + +# Services +disable_service n-net +ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-sriov-agt + +# Heat +enable_plugin heat https://git.openstack.org/openstack/heat stable/pike + +# Neutron +enable_plugin neutron https://git.openstack.org/openstack/neutron.git stable/pike + +# Neutron Options +FLOATING_RANGE=<RANGE_IN_THE_PUBLIC_INTERFACE_NETWORK> +Q_FLOATING_ALLOCATION_POOL=start=<START_IP_ADDRESS>,end=<END_IP_ADDRESS> +PUBLIC_NETWORK_GATEWAY=<PUBLIC_NETWORK_GATEWAY> +PUBLIC_INTERFACE=<PUBLIC INTERFACE> + +# ML2 Configuration +Q_PLUGIN=ml2 +Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,sriovnicswitch +Q_ML2_PLUGIN_TYPE_DRIVERS=vlan,flat,local,vxlan,gre,geneve + +# Open vSwitch provider networking configuration +Q_USE_PROVIDERNET_FOR_PUBLIC=True +OVS_PHYSICAL_BRIDGE=br-ex +OVS_BRIDGE_MAPPINGS=public:br-ex +PHYSICAL_DEVICE_MAPPINGS=physnet1:<PF0_IFNAME>,physnet2:<PF1_IFNAME> +PHYSICAL_NETWORK=physnet1,physnet2 + + +[[post-config|$NOVA_CONF]] +[DEFAULT] +scheduler_default_filters=RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,PciPassthroughFilter +# Whitelist PCI devices +pci_passthrough_whitelist = {\\"devname\\": \\"<PF0_IFNAME>\\", \\"physical_network\\": \\"physnet1\\" } +pci_passthrough_whitelist = {\\"devname\\": \\"<PF1_IFNAME>\\", \\"physical_network\\": \\"physnet2\\" } + +[libvirt] +cpu_mode = host-model + + +# ML2 plugin bits for SR-IOV enablement of Intel Corporation XL710/X710 Virtual Function +[[post-config|/$Q_PLUGIN_CONF_FILE]] +[ml2_sriov] +agent_required = True +supported_pci_vendor_devs = <VF_DEV_ID:VF_VEN_ID> diff --git a/docs/testing/user/userguide/code/single-devstack-local.conf b/docs/testing/user/userguide/code/single-devstack-local.conf new file mode 100644 index 000000000..4c44f729d --- /dev/null +++ b/docs/testing/user/userguide/code/single-devstack-local.conf @@ -0,0 +1,62 @@ +[[local|localrc]] +HOST_IP=<HOST_IP_ADDRESS> +ADMIN_PASSWORD=password +MYSQL_PASSWORD=$ADMIN_PASSWORD +DATABASE_PASSWORD=$ADMIN_PASSWORD +RABBIT_PASSWORD=$ADMIN_PASSWORD +SERVICE_PASSWORD=$ADMIN_PASSWORD +HORIZON_PASSWORD=$ADMIN_PASSWORD + +# Internet access. +RECLONE=False +PIP_UPGRADE=True +IP_VERSION=4 + +# Services +disable_service n-net +ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-sriov-agt + +# Heat +enable_plugin heat https://git.openstack.org/openstack/heat stable/pike + +# Neutron +enable_plugin neutron https://git.openstack.org/openstack/neutron.git stable/pike + +# Neutron Options +FLOATING_RANGE=<RANGE_IN_THE_PUBLIC_INTERFACE_NETWORK> +Q_FLOATING_ALLOCATION_POOL=start=<START_IP_ADDRESS>,end=<END_IP_ADDRESS> +PUBLIC_NETWORK_GATEWAY=<PUBLIC_NETWORK_GATEWAY> +PUBLIC_INTERFACE=<PUBLIC INTERFACE> + +# ML2 Configuration +Q_PLUGIN=ml2 +Q_ML2_PLUGIN_MECHANISM_DRIVERS=openvswitch,sriovnicswitch +Q_ML2_PLUGIN_TYPE_DRIVERS=vlan,flat,local,vxlan,gre,geneve + +# Open vSwitch provider networking configuration +Q_USE_PROVIDERNET_FOR_PUBLIC=True +OVS_PHYSICAL_BRIDGE=br-ex +OVS_BRIDGE_MAPPINGS=public:br-ex +PHYSICAL_DEVICE_MAPPINGS=physnet1:<PF0_IFNAME>,physnet2:<PF1_IFNAME> +PHYSICAL_NETWORK=physnet1,physnet2 + + +[[post-config|$NOVA_CONF]] +[DEFAULT] +scheduler_default_filters=RamFilter,ComputeFilter,AvailabilityZoneFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,PciPassthroughFilter +# Whitelist PCI devices +pci_passthrough_whitelist = {\\"devname\\": \\"<PF0_IFNAME>\\", \\"physical_network\\": \\"physnet1\\" } +pci_passthrough_whitelist = {\\"devname\\": \\"<PF1_IFNAME>\\", \\"physical_network\\": \\"physnet2\\" } + +[filter_scheduler] +enabled_filters = RetryFilter,AvailabilityZoneFilter,RamFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,SameHostFilter + +[libvirt] +cpu_mode = host-model + + +# ML2 plugin bits for SR-IOV enablement of Intel Corporation XL710/X710 Virtual Function +[[post-config|/$Q_PLUGIN_CONF_FILE]] +[ml2_sriov] +agent_required = True +supported_pci_vendor_devs = <VF_DEV_ID:VF_VEN_ID> diff --git a/docs/testing/user/userguide/code/single-yardstick-pod.conf b/docs/testing/user/userguide/code/single-yardstick-pod.conf new file mode 100644 index 000000000..421246d60 --- /dev/null +++ b/docs/testing/user/userguide/code/single-yardstick-pod.conf @@ -0,0 +1,22 @@ +nodes: +- + name: trafficgen_1 + role: tg__0 + ip: <TG-HOST-IP> + user: <TG-USER> + password: <TG-PASS> + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:18:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "10.1.1.150" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:18:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "10.1.1.151" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:02" diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc019.rst b/docs/testing/user/userguide/opnfv_yardstick_tc019.rst index 57e8ddf79..8d79e011a 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc019.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc019.rst @@ -125,7 +125,12 @@ Yardstick Test Case Description TC019 +--------------+--------------------------------------------------------------+ |post-action | It is the action when the test cases exist. It will check | | | the status of the specified process on the host, and restart | -| | the process if it is not running for next test cases | +| | the process if it is not running for next test cases. | +| | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | | | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc045.rst b/docs/testing/user/userguide/opnfv_yardstick_tc045.rst index 0b0993c34..378176090 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc045.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc045.rst @@ -128,9 +128,14 @@ Yardstick Test Case Description TC045 | | Result: The test case is passed or not. | | | | +--------------+--------------------------------------------------------------+ -|post-action | It is the action when the test cases exist. It will check the| -| | status of the specified process on the host, and restart the | -| | process if it is not running for next test cases | +|post-action | It is the action when the test cases exist. It will check | +| | the status of the specified process on the host, and restart | +| | the process if it is not running for next test cases. | +| | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | | | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc046.rst b/docs/testing/user/userguide/opnfv_yardstick_tc046.rst index cce6c6884..5308c8e7b 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc046.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc046.rst @@ -127,9 +127,14 @@ Yardstick Test Case Description TC046 | | Result: The test case is passed or not. | | | | +--------------+--------------------------------------------------------------+ -|post-action | It is the action when the test cases exist. It will check the| -| | status of the specified process on the host, and restart the | -| | process if it is not running for next test cases | +|post-action | It is the action when the test cases exist. It will check | +| | the status of the specified process on the host, and restart | +| | the process if it is not running for next test cases. | +| | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | | | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc047.rst b/docs/testing/user/userguide/opnfv_yardstick_tc047.rst index 95158cfd6..bb8ffc6ab 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc047.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc047.rst @@ -128,9 +128,14 @@ Yardstick Test Case Description TC047 | | Result: The test case is passed or not. | | | | +--------------+--------------------------------------------------------------+ -|post-action | It is the action when the test cases exist. It will check the| -| | status of the specified process on the host, and restart the | -| | process if it is not running for next test cases | +|post-action | It is the action when the test cases exist. It will check | +| | the status of the specified process on the host, and restart | +| | the process if it is not running for next test cases. | +| | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | | | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc048.rst b/docs/testing/user/userguide/opnfv_yardstick_tc048.rst index 21c00d1fe..1bf627282 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc048.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc048.rst @@ -128,9 +128,14 @@ Yardstick Test Case Description TC048 | | Result: The test case is passed or not. | | | | +--------------+--------------------------------------------------------------+ -|post-action | It is the action when the test cases exist. It will check the| -| | status of the specified process on the host, and restart the | -| | process if it is not running for next test cases | +|post-action | It is the action when the test cases exist. It will check | +| | the status of the specified process on the host, and restart | +| | the process if it is not running for next test case | +| | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | | | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc049.rst b/docs/testing/user/userguide/opnfv_yardstick_tc049.rst index f58bb9989..12ed94b7d 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc049.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc049.rst @@ -128,9 +128,14 @@ Yardstick Test Case Description TC049 | | Result: The test case is passed or not. | | | | +--------------+--------------------------------------------------------------+ -|post-action | It is the action when the test cases exist. It will check the| -| | status of the specified process on the host, and restart the | -| | process if it is not running for next test cases | +|post-action | It is the action when the test cases exist. It will check | +| | the status of the specified process on the host, and restart | +| | the process if it is not running for next test cases. | +| | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | | | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc053.rst b/docs/testing/user/userguide/opnfv_yardstick_tc053.rst index 3c6bbc628..7308babb8 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc053.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc053.rst @@ -135,6 +135,11 @@ Yardstick Test Case Description TC053 | | the status of the specified process on the host, and restart | | | the process if it is not running for next test cases. | | | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | +| | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | | | execution problem. | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc056.rst b/docs/testing/user/userguide/opnfv_yardstick_tc056.rst index 09b866c34..cd8cc2f20 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc056.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc056.rst @@ -142,6 +142,11 @@ Yardstick Test Case Description TC056 | | the status of the specified process on the host, and restart | | | the process if it is not running for next test cases. | | | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | +| | | +--------------+--------------------------------------------------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | | | execution problem. | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc057.rst b/docs/testing/user/userguide/opnfv_yardstick_tc057.rst index bb42b2aae..1bb43c9e7 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc057.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc057.rst @@ -162,8 +162,14 @@ Yardstick Test Case Description TC057 |post-action | It is the action when the test cases exist. It will check | | | the status of the cluster messaging process(corosync) on the | | | host, and restart the process if it is not running for next | -| | test cases | +| | test cases. | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | +| | | +--------------+------+----------------------------------+--------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | | | execution problem. | +| | | +--------------+--------------------------------------------------------------+ diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc058.rst b/docs/testing/user/userguide/opnfv_yardstick_tc058.rst index 7c323e913..9e8427b50 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc058.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc058.rst @@ -109,8 +109,9 @@ Yardstick Test Case Description TC058 |conditions | with cachestat included in the image. | | | | +--------------+--------------------------------------------------------------+ -|step 1 | Two host VMs are booted, these two hosts are in two different| -| | networks, the networks are connected by a virtual router | +|step 1 | Two host VMs are booted, these two hosts are in two | +| | different networks, the networks are connected by a virtual | +| | router. | | | | +--------------+--------------------------------------------------------------+ |step 1 | start monitors: | @@ -143,7 +144,13 @@ Yardstick Test Case Description TC058 | | Virtual machines and network created in the test case will | | | be destoryed. | | | | +| | Notice: This post-action uses 'lsb_release' command to check | +| | the host linux distribution and determine the OpenStack | +| | service name to restart the process. Lack of 'lsb_release' | +| | on the host may cause failure to restart the process. | +| | | +--------------+------+----------------------------------+--------------------+ |test verdict | Fails only if SLA is not passed, or if there is a test case | | | execution problem. | +| | | +--------------+--------------------------------------------------------------+ |