diff options
Diffstat (limited to 'docs/userguide')
| -rw-r--r-- | docs/userguide/opnfv_yardstick_tc053.rst | 142 | ||||
| -rw-r--r-- | docs/userguide/opnfv_yardstick_tc054.rst | 125 | ||||
| -rw-r--r-- | docs/userguide/opnfv_yardstick_tc061.rst | 88 | ||||
| -rw-r--r-- | docs/userguide/opnfv_yardstick_tc074.rst | 137 |
4 files changed, 492 insertions, 0 deletions
diff --git a/docs/userguide/opnfv_yardstick_tc053.rst b/docs/userguide/opnfv_yardstick_tc053.rst new file mode 100644 index 000000000..8808d12d9 --- /dev/null +++ b/docs/userguide/opnfv_yardstick_tc053.rst @@ -0,0 +1,142 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Yin Kanglin and others. +.. 14_ykl@tongji.edu.cn + +************************************* +Yardstick Test Case Description TC053 +************************************* + ++-----------------------------------------------------------------------------+ +|OpenStack Controller Load Balance Service High Availability | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC053: OpenStack Controller Load Balance | +| | Service High Availability- | ++--------------+--------------------------------------------------------------+ +|test purpose | This test case will verify the high availability of the | +| | load balance service(current is HAProxy) that supports | +| | OpenStack on controller node. When the load balance service | +| | of a specified controller node is killed, whether other load | +| | balancers on other controller nodes will work, and whether | +| | the controller node will restart the load balancer are | +| | checked. | ++--------------+--------------------------------------------------------------+ +|test method | This test case kills the processes of load balance service | +| | on a selected control node, then checks whether the request | +| | of the related Openstack command is OK and the killed | +| | processes are recovered. | ++--------------+--------------------------------------------------------------+ +|attackers | In this test case, an attacker called "kill-process" is | +| | needed. This attacker includes three parameters: | +| | 1) fault_type: which is used for finding the attacker's | +| | scripts. It should be always set to "kill-process" in this | +| | test case. | +| | 2) process_name: which is the process name of the specified | +| | OpenStack service. If there are multiple processes use the | +| | same name on the host, all of them are killed by this | +| | attacker. | +| | In this case. This parameter should always set to "swift- | +| | proxy". | +| | 3) host: which is the name of a control node being attacked. | +| | | +| | e.g. | +| | -fault_type: "kill-process" | +| | -process_name: "haproxy" | +| | -host: node1 | +| | | ++--------------+--------------------------------------------------------------+ +|monitors | In this test case, two kinds of monitor are needed: | +| | 1. the "openstack-cmd" monitor constantly request a specific | +| | Openstack command, which needs two parameters: | +| | 1) monitor_type: which is used for finding the monitor class | +| | and related scritps. It should be always set to | +| | "openstack-cmd" for this monitor. | +| | 2) command_name: which is the command name used for request. | +| | | +| | 2. the "process" monitor check whether a process is running | +| | on a specific node, which needs three parameters: | +| | 1) monitor_type: which used for finding the monitor class | +| | and related scripts. It should be always set to "process" | +| | for this monitor. | +| | 2) process_name: which is the process name for monitor | +| | 3) host: which is the name of the node runing the process | +| | In this case, the command_name of monitor1 should be | +| | services that is supported by load balancer and the process- | +| | name of monitor2 should be "haproxy", for example: | +| | | +| | e.g. | +| | monitor1: | +| | -monitor_type: "openstack-cmd" | +| | -command_name: "nova image-list" | +| | monitor2: | +| | -monitor_type: "process" | +| | -process_name: "haproxy" | +| | -host: node1 | +| | | ++--------------+--------------------------------------------------------------+ +|metrics | In this test case, there are two metrics: | +| | 1)service_outage_time: which indicates the maximum outage | +| | time (seconds) of the specified Openstack command request. | +| | 2)process_recover_time: which indicates the maximun time | +| | (seconds) from the process being killed to recovered | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | Developed by the project. Please see folder: | +| | "yardstick/benchmark/scenarios/availability/ha_tools" | +| | | ++--------------+--------------------------------------------------------------+ +|references | ETSI NFV REL001 | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | This test case needs two configuration files: | +| | 1) test case file: opnfv_yardstick_tc053.yaml | +| | -Attackers: see above "attackers" discription | +| | -waiting_time: which is the time (seconds) from the process | +| | being killed to stoping monitors the monitors | +| | -Monitors: see above "monitors" discription | +| | -SLA: see above "metrics" discription | +| | | +| | 2)POD file: pod.yaml | +| | The POD configuration should record on pod.yaml first. | +| | the "host" item in this test case will use the node name in | +| | the pod.yaml. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | start monitors: | +| | each monitor will run with independently process | +| | | +| | Result: The monitor info will be collected. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | do attacker: connect the host through SSH, and then execute | +| | the kill process script with param value specified by | +| | "process_name" | +| | | +| | Result: Process will be killed. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | stop monitors after a period of time specified by | +| | "waiting_time" | +| | | +| | Result: The monitor info will be aggregated. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | verify the SLA | +| | | +| | Result: The test case is passed or not. | +| | | ++--------------+--------------------------------------------------------------+ +|post-action | It is the action when the test cases exist. It will check | +| | the status of the specified process on the host, and restart | +| | the process if it is not running for next test cases. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Fails only if SLA is not passed, or if there is a test case | +| | execution problem. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/docs/userguide/opnfv_yardstick_tc054.rst b/docs/userguide/opnfv_yardstick_tc054.rst new file mode 100644 index 000000000..7f92be2bc --- /dev/null +++ b/docs/userguide/opnfv_yardstick_tc054.rst @@ -0,0 +1,125 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Yin Kanglin and others. +.. 14_ykl@tongji.edu.cn + +************************************* +Yardstick Test Case Description TC054 +************************************* + ++-----------------------------------------------------------------------------+ +|OpenStack Virtual IP High Availability | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC054: OpenStack Virtual IP High | +| | Availability | ++--------------+--------------------------------------------------------------+ +|test purpose | This test case will verify the high availability for virtual | +| | ip in the environment. When master node of virtual ip is | +| | abnormally shutdown, connection to virtual ip and | +| | the services binded to the virtual IP it should be OK. | ++--------------+--------------------------------------------------------------+ +|test method | This test case shutdowns the virtual IP master node with | +| | some fault injection tools, then checks whether virtual ips | +| | can be pinged and services binded to virtual ip are OK with | +| | some monitor tools. | ++--------------+--------------------------------------------------------------+ +|attackers | In this test case, an attacker called "control-shutdown" is | +| | needed. This attacker includes two parameters: | +| | 1) fault_type: which is used for finding the attacker's | +| | scripts. It should be always set to "control-shutdown" in | +| | this test case. | +| | 2) host: which is the name of a control node being attacked. | +| | | +| | In this case the host should be the virtual ip master node, | +| | that means the host ip is the virtual ip, for exapmle: | +| | -fault_type: "control-shutdown" | +| | -host: node1(the VIP Master node) | ++--------------+--------------------------------------------------------------+ +|monitors | In this test case, two kinds of monitor are needed: | +| | 1. the "ip_status" monitor that pings a specific ip to check | +| | the connectivity of this ip, which needs two parameters: | +| | 1) monitor_type: which is used for finding the monitor class | +| | and related scripts. It should be always set to "ip_status" | +| | for this monitor. | +| | 2) ip_address: The ip to be pinged. In this case, ip_address | +| | should be the virtual IP. | +| | | +| | 2. the "openstack-cmd" monitor constantly request a specific | +| | Openstack command, which needs two parameters: | +| | 1) monitor_type: which is used for finding the monitor class | +| | and related scripts. It should be always set to | +| | "openstack-cmd" for this monitor. | +| | 2) command_name: which is the command name used for request. | +| | | +| | e.g. | +| | monitor1: | +| | -monitor_type: "ip_status" | +| | -host: 192.168.0.2 | +| | monitor2: | +| | -monitor_type: "openstack-cmd" | +| | -command_name: "nova image-list" | +| | | ++--------------+--------------------------------------------------------------+ +|metrics | In this test case, there are two metrics: | +| | 1) ping_outage_time: which-indicates the maximum outage time | +| | to ping the specified host. | +| | 2)service_outage_time: which indicates the maximum outage | +| | time (seconds) of the specified Openstack command request. | ++--------------+--------------------------------------------------------------+ +|test tool | Developed by the project. Please see folder: | +| | "yardstick/benchmark/scenarios/availability/ha_tools" | +| | | ++--------------+--------------------------------------------------------------+ +|references | ETSI NFV REL001 | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | This test case needs two configuration files: | +| | 1) test case file: opnfv_yardstick_tc054.yaml | +| | -Attackers: see above "attackers" discription | +| | -waiting_time: which is the time (seconds) from the process | +| | being killed to stoping monitors the monitors | +| | -Monitors: see above "monitors" discription | +| | -SLA: see above "metrics" discription | +| | | +| | 2)POD file: pod.yaml | +| | The POD configuration should record on pod.yaml first. | +| | the "host" item in this test case will use the node name in | +| | the pod.yaml. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | start monitors: | +| | each monitor will run with independently process | +| | | +| | Result: The monitor info will be collected. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | do attacker: connect the host through SSH, and then execute | +| | the shutdown script on the VIP master node. | +| | | +| | Result: VIP master node will be shutdown | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | stop monitors after a period of time specified by | +| | "waiting_time" | +| | | +| | Result: The monitor info will be aggregated. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | verify the SLA | +| | | +| | Result: The test case is passed or not. | +| | | ++--------------+--------------------------------------------------------------+ +|post-action | It is the action when the test cases exist. It restarts the | +| | original VIP master node if it is not restarted. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Fails only if SLA is not passed, or if there is a test case | +| | execution problem. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/docs/userguide/opnfv_yardstick_tc061.rst b/docs/userguide/opnfv_yardstick_tc061.rst new file mode 100644 index 000000000..1d424414e --- /dev/null +++ b/docs/userguide/opnfv_yardstick_tc061.rst @@ -0,0 +1,88 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +************************************* +Yardstick Test Case Description TC061 +************************************* + +.. _man-pages: http://linux.die.net/man/1/sar + ++-----------------------------------------------------------------------------+ +|Network Utilization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC061_Network Utilization | +| | | ++--------------+--------------------------------------------------------------+ +|metric | Network utilization | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | To evaluate the IaaS network capability with regards to | +| | network utilization, including Total number of packets | +| | received per second, Total number of packets transmitted per | +| | second, Total number of kilobytes received per second, Total | +| | number of kilobytes transmitted per second, Number of | +| | compressed packets received per second (for cslip etc.), | +| | Number of compressed packets transmitted per second, Number | +| | of multicast packets received per second, Utilization | +| | percentage of the network interface. | +| | This test case should be run in parallel to other Yardstick | +| | test cases and not run as a stand-alone test case. | +| | Measure the network usage statistics from the network devices| +| | Average, minimum and maximun values are obtained. | +| | The purpose is also to be able to spot trends. | +| | Test results, graphs and similar shall be stored for | +| | comparison reasons and product evolution understanding | +| | between different OPNFV versions and/or configurations. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | File: netutilization.yaml (in the 'samples' directory) | +| | | +| | * interval: 1 - repeat, pausing every 1 seconds in-between. | +| | * count: 1 - display statistics 1 times, then exit. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | sar | +| | | +| | The sar command writes to standard output the contents of | +| | selected cumulative activity counters in the operating | +| | system. | +| | sar is normally part of a Linux distribution, hence it | +| | doesn't needs to be installed. | +| | | ++--------------+--------------------------------------------------------------+ +|references | man-pages_ | +| | | +| | ETSI-NFV-TST001 | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | Test can be configured with different: | +| | | +| | * interval; | +| | * count; | +| | * runner Iteration and intervals. | +| | | +| | There are default values for each above-mentioned option. | +| | Run in background with other test cases. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | The test case image needs to be installed into Glance | +|conditions | with sar included in the image. | +| | | +| | No POD specific requirements have been identified. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result. | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | The host is installed as client. The related TC, or TCs, is | +| | invoked and sar logs are produced and stored. | +| | | +| | Result: logs are stored. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | None. Network utilization results are fetched and stored. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/docs/userguide/opnfv_yardstick_tc074.rst b/docs/userguide/opnfv_yardstick_tc074.rst new file mode 100644 index 000000000..c938f5dfd --- /dev/null +++ b/docs/userguide/opnfv_yardstick_tc074.rst @@ -0,0 +1,137 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +************************************* +Yardstick Test Case Description TC074 +************************************* + +.. Storperf: https://wiki.opnfv.org/display/storperf/Storperf + ++-----------------------------------------------------------------------------+ +|Storperf | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC074_Storperf | +| | | ++--------------+--------------------------------------------------------------+ +|metric | Storage performance | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | Storperf integration with yardstick. The purpose of StorPerf | +| | is to provide a tool to measure block and object storage | +| | performance in an NFVI. When complemented with a | +| | characterization of typical VF storage performance | +| | requirements, it can provide pass/fail thresholds for test, | +| | staging, and production NFVI environments. | +| | | +| | The benchmarks developed for block and object storage will | +| | be sufficiently varied to provide a good preview of expected | +| | storage performance behavior for any type of VNF workload. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | file: opnfv_yardstick_tc074.yaml | +| | | +| | * agent_count: 1 - the number of VMs to be created | +| | * agent_image: "Ubuntu-14.04" - image used for creating VMs | +| | * public_network: "ext-net" - name of public network | +| | * volume_size: 2 - cinder volume size | +| | * block_sizes: "4096" - data block size | +| | * queue_depths: "4" | +| | * StorPerf_ip: "192.168.200.2" | +| | * query_interval: 10 - state query interval | +| | * timeout: 600 - maximum allowed job time | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | Storperf | +| | | +| | StorPerf is a tool to measure block and object storage | +| | performance in an NFVI. | +| | | +| | StorPerf is delivered as a Docker container from | +| | https://hub.docker.com/r/opnfv/storperf/tags/. | +| | | ++--------------+--------------------------------------------------------------+ +|references | Storperf_ | +| | | +| | ETSI-NFV-TST001 | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | Test can be configured with different: | +| | | +| | * agent_count | +| | * volume_size | +| | * block_sizes | +| | * queue_depths | +| | * query_interval | +| | * timeout | +| | * target=[device or path] | +| | The path to either an attached storage device | +| | (/dev/vdb, etc) or a directory path (/opt/storperf) that | +| | will be used to execute the performance test. In the case | +| | of a device, the entire device will be used. If not | +| | specified, the current directory will be used. | +| | * workload=[workload module] | +| | If not specified, the default is to run all workloads. The | +| | workload types are: | +| | - rs: 100% Read, sequential data | +| | - ws: 100% Write, sequential data | +| | - rr: 100% Read, random access | +| | - wr: 100% Write, random access | +| | - rw: 70% Read / 30% write, random access | +| | * nossd: Do not perform SSD style preconditioning. | +| | * nowarm: Do not perform a warmup prior to | +| | measurements. | +| | * report= [job_id] | +| | Query the status of the supplied job_id and report on | +| | metrics. If a workload is supplied, will report on only | +| | that subset. | +| | | +| | There are default values for each above-mentioned option. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | If you do not have an Ubuntu 14.04 image in Glance, you will | +|conditions | need to add one. A key pair for launching agents is also | +| | required. | +| | | +| | Storperf is required to be installed in the environment. | +| | There are two possible methods for Storperf installation: | +| | Run container on Jump Host | +| | Run container in a VM | +| | | +| | Running StorPerf on Jump Host | +| | Requirements: | +| | - Docker must be installed | +| | - Jump Host must have access to the OpenStack Controller | +| | API | +| | - Jump Host must have internet connectivity for | +| | downloading docker image | +| | - Enough floating IPs must be available to match your | +| | agent count | +| | | +| | Running StorPerf in a VM | +| | Requirements: | +| | - VM has docker installed | +| | - VM has OpenStack Controller credentials and can | +| | communicate with the Controller API | +| | - VM has internet connectivity for downloading the | +| | docker image | +| | - Enough floating IPs must be available to match your | +| | agent count | +| | | +| | No POD specific requirements have been identified. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | The Storperf is installed and Ubuntu 14.04 image is stored | +| | in glance. TC is invoked and logs are produced and stored. | +| | | +| | Result: Logs are stored. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | None. Storage performance results are fetched and stored. | +| | | ++--------------+--------------------------------------------------------------+ |