diff options
Diffstat (limited to 'docs/testing/user/userguide')
23 files changed, 3074 insertions, 331 deletions
diff --git a/docs/testing/user/userguide/04-installation.rst b/docs/testing/user/userguide/04-installation.rst index 37e4ba599..f11a9c28e 100644 --- a/docs/testing/user/userguide/04-installation.rst +++ b/docs/testing/user/userguide/04-installation.rst @@ -82,7 +82,7 @@ following docker command:: Run the Docker image to get a Yardstick container:: - docker run -itd --privileged -v /var/run/docker.sock:/var/run/docker.sock -p 8888:5000 -e INSTALLER_IP=192.168.200.2 -e INSTALLER_TYPE=compass --name yardstick opnfv/yardstick:stable + docker run -itd --privileged -v /var/run/docker.sock:/var/run/docker.sock -p 8888:5000 --name yardstick opnfv/yardstick:stable Note: @@ -101,21 +101,6 @@ Note: | | Yardstick container, this | | | parameter is needed. | +----------------------------------------------+------------------------------+ -| -e INSTALLER_IP=192.168.200.2 | If you want to use yardstick | -| | env prepare command(or | -| -e INSTALLER_TYPE=compass | related API) to load the | -| | images that Yardstick needs, | -| | these parameters should be | -| | provided. | -| | The INSTALLER_IP and | -| | INSTALLER_TYPE are depending | -| | on your OpenStack installer. | -| | Currently Apex, Compass, | -| | Fuel and Joid are supported. | -| | If you use other installers, | -| | such as devstack, these | -| | parameters can be ignores. | -+----------------------------------------------+------------------------------+ | -p 8888:5000 | If you want to call | | | Yardstick API out of | | | Yardstick container, this | @@ -149,11 +134,11 @@ In the Yardstick container, the Yardstick repository is located in the ``/home/o yardstick env prepare -**NOTE**: The above command works for four OPNFV installers -- **Apex**, **Compass**, **Fuel** and **Joid**. -For Non-OPNFV installer OpenStack environment, the above command can also be used to configure the environment. -But before running the above command in a Non-OPNFV installer environment, it is necessary to create the /etc/yardstick/openstack.creds file and -save OpenStack environment variables in it. For details of the required OpenStack environment variables please refer to -section **Export OpenStack environment variables** +**NOTE**: Since Euphrates release, the above command will not able to automatically configure the /etc/yardstick/openstack.creds file. +So before running the above command, it is necessary to create the /etc/yardstick/openstack.creds file and save OpenStack environment variables into it manually. +If you have the openstack credential file saved outside the Yardstcik Docker container, you can do this easily by mapping the credential file into Yardstick container + using '-v /path/to/credential_file:/etc/yardstick/openstack.creds' when running the Yardstick container. +For details of the required OpenStack environment variables please refer to section **Export OpenStack environment variables** The env prepare command may take up to 6-8 minutes to finish building yardstick-image and other environment preparation. Meanwhile if you wish to @@ -260,6 +245,16 @@ Yardstick guest images. This script is mainly used for CI and can be also used i source $YARDSTICK_REPO_DIR/tests/ci/load_images.sh +The Yardstick container GUI +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In Euphrates release, Yardstick implemeted a GUI for Yardstick Docker container. +After booting up Yardstick container, you can visit the GUI at <container_host_ip>:8888/gui/index.html + +For usage of Yardstick GUI, please watch our demo video at https://www.youtube.com/watch?v=M3qbJDp6QBk +**Note:** The Yardstick GUI is still in development, the GUI layout and features may change. + + Delete the Yardstick container ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -443,6 +438,141 @@ Deploy InfluxDB and Grafana directly in Ubuntu (**Todo**) ----------------------------------------------------------- +Yardstick common CLI +-------------------- + +list test cases +>>>>>>>>>>>>>>> +**yardstick testcase list** + +This command line would list all test cases in yardstick. +It would show like below:: + + +--------------------------------------------------------------------------------------- + | Testcase Name | Description + +--------------------------------------------------------------------------------------- + | opnfv_yardstick_tc001 | Measure network throughput using pktgen + | opnfv_yardstick_tc002 | measure network latency using ping + | opnfv_yardstick_tc005 | Measure Storage IOPS, throughput and latency using fio. + | opnfv_yardstick_tc006 | Measure volume storage IOPS, throughput and latency using fio. + | opnfv_yardstick_tc008 | Measure network throughput and packet loss using Pktgen + | opnfv_yardstick_tc009 | Measure network throughput and packet loss using pktgen + | opnfv_yardstick_tc010 | measure memory read latency using lmbench. + | opnfv_yardstick_tc011 | Measure packet delay variation (jitter) using iperf3. + | opnfv_yardstick_tc012 | Measure memory read and write bandwidth using lmbench. + | opnfv_yardstick_tc014 | Measure Processing speed using unixbench. + | opnfv_yardstick_tc019 | Sample test case for the HA of controller node service. + ... + +--------------------------------------------------------------------------------------- +show a test case config file +>>>>>>>>>>>>>>>>>>>>>>>>>>>> +Take opnfv_yardstick_tc002 for an example. This test case measure network latency. +You just need to type in **yardstick testcase show opnfv_yardstick_tc002**, and the console +would show the config yaml of this test case:: + ############################################################################## + # Copyright (c) 2017 kristian.hunt@gmail.com and others. + # + # All rights reserved. This program and the accompanying materials + # are made available under the terms of the Apache License, Version 2.0 + # which accompanies this distribution, and is available at + # http://www.apache.org/licenses/LICENSE-2.0 + ############################################################################## + --- + + schema: "yardstick:task:0.1" + description: > + Yardstick TC002 config file; + measure network latency using ping; + + {% set image = image or "cirros-0.3.5" %} + + {% set provider = provider or none %} + {% set physical_network = physical_network or 'physnet1' %} + {% set segmentation_id = segmentation_id or none %} + {% set packetsize = packetsize or 100 %} + + scenarios: + {% for i in range(2) %} + - + type: Ping + options: + packetsize: {{packetsize}} + host: athena.demo + target: ares.demo + + runner: + type: Duration + duration: 60 + interval: 10 + + sla: + max_rtt: 10 + action: monitor + {% endfor %} + + context: + name: demo + image: {{image}} + flavor: yardstick-flavor + user: cirros + + placement_groups: + pgrp1: + policy: "availability" + + servers: + athena: + floating_ip: true + placement: "pgrp1" + ares: + placement: "pgrp1" + + networks: + test: + cidr: '10.0.1.0/24' + {% if provider == "vlan" %} + provider: {{provider}} + physical_network: {{physical_network}}å + {% if segmentation_id %} + segmentation_id: {{segmentation_id}} + {% endif %} + {% endif %} + +start a task to run yardstick test case +>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> +If you want run a test case, then you need to use **yardstick task start <test_case_path>** +this command support some parameters as below: + ++---------------------+--------------------------------------------------+ +| Parameters | Detail | ++=====================+==================================================+ +| -d | show debug log of yardstick running | +| | | ++---------------------+--------------------------------------------------+ +| --task-args | If you want to customize test case parameters, | +| | use "--task-args" to pass the value. The format | +| | is a json string with parameter key-value pair. | +| | | ++---------------------+--------------------------------------------------+ +| --task-args-file | If you want to use yardstick | +| | env prepare command(or | +| | related API) to load the | ++---------------------+--------------------------------------------------+ +| --parse-only | | +| | | +| | | ++---------------------+--------------------------------------------------+ +| --output-file \ | Specify where to output the log. if not pass, | +| OUTPUT_FILE_PATH | the default value is | +| | "/tmp/yardstick/yardstick.log" | +| | | ++---------------------+--------------------------------------------------+ +| --suite \ | run a test suite, TEST_SUITE_PATH speciy where | +| TEST_SUITE_PATH | the test suite locates | +| | | ++---------------------+--------------------------------------------------+ + + Run Yardstick in a local environment ------------------------------------ diff --git a/docs/testing/user/userguide/08-api.rst b/docs/testing/user/userguide/08-api.rst index 1d9ea6d64..ff6e62228 100644 --- a/docs/testing/user/userguide/08-api.rst +++ b/docs/testing/user/userguide/08-api.rst @@ -10,7 +10,7 @@ Yardstick Restful API Abstract -------- -Yardstick support restful API in danube. +Yardstick support restful API since Danube. Available API @@ -19,19 +19,19 @@ Available API /yardstick/env/action ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Description: This API is used to do some work related to environment. For now, we support: +Description: This API is used to prepare Yardstick test environment. For Euphrates, it supports: -1. Prepare yardstick environment(Including fetch openrc file, get external network and load images) -2. Start a InfluxDB docker container and config yardstick output to InfluxDB. -3. Start a Grafana docker container and config with the InfluxDB. +1. Prepare yardstick test environment, including set external network environment variable, load Yardstick VM images and create flavors; +2. Start an InfluxDB Docker container and config Yardstick output to InfluxDB; +3. Start a Grafana Docker container and config it with the InfluxDB. -Which API to call will depend on the Parameters. +Which API to call will depend on the parameters. Method: POST -Prepare Yardstick Environment +Prepare Yardstick test environment Example:: { @@ -41,7 +41,7 @@ Example:: This is an asynchronous API. You need to call /yardstick/asynctask API to get the task result. -Start and Config InfluxDB docker container +Start and config an InfluxDB docker container Example:: { @@ -51,7 +51,7 @@ Example:: This is an asynchronous API. You need to call /yardstick/asynctask API to get the task result. -Start and Config Grafana docker container +Start and config a Grafana docker container Example:: { @@ -64,13 +64,13 @@ This is an asynchronous API. You need to call /yardstick/asynctask API to get th /yardstick/asynctask ^^^^^^^^^^^^^^^^^^^^ -Description: This API is used to get the status of asynchronous task +Description: This API is used to get the status of asynchronous tasks Method: GET -Get the status of asynchronous task +Get the status of asynchronous tasks Example:: http://localhost:8888/yardstick/asynctask?task_id=3f3f5e03-972a-4847-a5f8-154f1b31db8c @@ -81,13 +81,13 @@ The returned status will be 0(running), 1(finished) and 2(failed). /yardstick/testcases ^^^^^^^^^^^^^^^^^^^^ -Description: This API is used to list all release test cases now in yardstick. +Description: This API is used to list all released Yardstick test cases. Method: GET -Get a list of release test cases +Get a list of released test cases Example:: http://localhost:8888/yardstick/testcases @@ -96,13 +96,13 @@ Example:: /yardstick/testcases/release/action ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Description: This API is used to run a yardstick release test case. +Description: This API is used to run a Yardstick released test case. Method: POST -Run a release test case +Run a released test case Example:: { @@ -119,7 +119,7 @@ This is an asynchronous API. You need to call /yardstick/results to get the resu /yardstick/testcases/samples/action ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Description: This API is used to run a yardstick sample test case. +Description: This API is used to run a Yardstick sample test case. Method: POST @@ -139,10 +139,25 @@ Example:: This is an asynchronous API. You need to call /yardstick/results to get the result. +/yardstick/testcases/<testcase_name>/docs +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Description: This API is used to the documentation of a certain released test case. + + +Method: GET + + +Get the documentation of a certain test case +Example:: + + http://localhost:8888/yardstick/taskcases/opnfv_yardstick_tc002/docs + + /yardstick/testsuites/action ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Description: This API is used to run a yardstick test suite. +Description: This API is used to run a Yardstick test suite. Method: POST @@ -162,11 +177,27 @@ Example:: This is an asynchronous API. You need to call /yardstick/results to get the result. +/yardstick/tasks/<task_id>/log + +Description: This API is used to get the real time log of test case execution. + + +Method: GET + + +Get real time of test case execution +Example:: + + http://localhost:8888/yardstick/tasks/14795be8-f144-4f54-81ce-43f4e3eab33f/log?index=0 + + /yardstick/results ^^^^^^^^^^^^^^^^^^ +Description: This API is used to get the test results of tasks. If you call /yardstick/testcases/samples/action API, it will return a task id. You can use the returned task id to get the results by using this API. + -Description: This API is used to get the test results of certain task. If you call /yardstick/testcases/samples/action API, it will return a task id. You can use the returned task id to get the results by using this API. +Method: GET Get test results of one task @@ -175,3 +206,457 @@ Example:: http://localhost:8888/yardstick/results?task_id=3f3f5e03-972a-4847-a5f8-154f1b31db8c This API will return a list of test case result + + +/api/v2/yardstick/openrcs/action + +Description: This API provides functionality of handling OpenStack credential file (openrc). For Euphrates, it supports: + +1. Upload an openrc file for an OpenStack environment; +2. Update an openrc file; +3. Get openrc file information; +4. Delete an openrc file. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Upload an openrc file for an OpenStack environment +Example:: + + { + 'action': 'upload_openrc', + 'args': { + 'file': file, + 'environment_id': environment_id + } + } + + +METHOD: POST + + +Update an openrc file +Example:: + + { + 'action': 'update_openrc', + 'args': { + 'openrc': { + "EXTERNAL_NETWORK": "ext-net", + "OS_AUTH_URL": "http://192.168.23.51:5000/v3", + "OS_IDENTITY_API_VERSION": "3", + "OS_IMAGE_API_VERSION": "2", + "OS_PASSWORD": "console", + "OS_PROJECT_DOMAIN_NAME": "default", + "OS_PROJECT_NAME": "admin", + "OS_TENANT_NAME": "admin", + "OS_USERNAME": "admin", + "OS_USER_DOMAIN_NAME": "default" + }, + 'environment_id': environment_id + } + } + + +METHOD: GET + +Get openrc file information +Example:: + + http://localhost:8888/api/v2/yardstick/openrcs/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +METHOD: DELETE + + +Delete openrc file +Example:: + + http://localhost:8888/api/v2/yardstick/openrcs/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +/api/v2/yardstick/pods/action + +Description: This API provides functionality of handling Yardstick pod file (pod.yaml). For Euphrates, it supports: + +1. Upload a pod file; +2. Get pod file information; +3. Delete an openrc file. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Upload a pod.yaml file +Example:: + + { + 'action': 'upload_pod_file', + 'args': { + 'file': file, + 'environment_id': environment_id + } + } + + +METHOD: GET + +Get pod file information +Example:: + + http://localhost:8888/api/v2/yardstick/pods/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +METHOD: DELETE + +Delete openrc file +Example:: + + http://localhost:8888/api/v2/yardstick/pods/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +/api/v2/yardstick/images/action + +Description: This API is used to do some work related to Yardstick VM images. For Euphrates, it supports: + +1. Load Yardstick VM images; +2. Get image's information; +3. Delete images. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Load VM images +Example:: + + { + 'action': 'load_images' + } + + +METHOD: GET + +Get image information +Example:: + + http://localhost:8888/api/v2/yardstick/images/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +METHOD: DELETE + +Delete images +Example:: + + http://localhost:8888/api/v2/yardstick/images/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +/api/v2/yardstick/tasks/action + +Description: This API is used to do some work related to yardstick tasks. For Euphrates, it supports: + +1. Create a Yardstick task; +2. run a Yardstick task; +3. Add a test case to a task; +4. Add a test suite to a task; +5. Get a tasks' information; +6. Delete a task. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Create a Yardstick task +Example:: + + { + 'action': 'create_task', + 'args': { + 'name': 'task1', + 'project_id': project_id + } + } + + +METHOD: PUT + + +Run a task +Example:: + + { + 'action': 'run' + } + + +METHOD: PUT + + +Add a test case to a task +Example:: + + { + 'action': 'add_case', + 'args': { + 'case_name': 'opnfv_yardstick_tc002', + 'case_content': case_content + } + } + + +METHOD: PUT + + +Add a test suite to a task +Example:: + + { + 'action': 'add_suite', + 'args': { + 'suite_name': 'opnfv_smoke', + 'suite_content': suite_content + } + } + + +METHOD: GET + +Get a task's information +Example:: + + http://localhost:8888/api/v2/yardstick/tasks/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +METHOD: DELETE + +Delete a task +Example:: + http://localhost:8888/api/v2/yardstick/tasks/5g6g3e02-155a-4847-a5f8-154f1b31db8c + + +/api/v2/yardstick/testcases/action + +Description: This API is used to do some work related to yardstick testcases. For Euphrates, it supports: + +1. Upload a test case; +2. Get all released test cases' information; +3. Get a certain released test case's information; +4. Delete a test case. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Upload a test case +Example:: + + { + 'action': 'upload_case', + 'args': { + 'file': file + } + } + + +METHOD: GET + + +Get all released test cases' information +Example:: + + http://localhost:8888/api/v2/yardstick/testcases + + +METHOD: GET + + +Get a certain released test case's information +Example:: + + http://localhost:8888/api/v2/yardstick/testcases/opnfv_yardstick_tc002 + + +METHOD: DELETE + + +Delete a certain test case +Example:: + http://localhost:8888/api/v2/yardstick/testcases/opnfv_yardstick_tc002 + + +/api/v2/yardstick/testsuites/action + +Description: This API is used to do some work related to yardstick test suites. For Euphrates, it supports: + +1. Create a test suite; +2. Get a certain test suite's information; +3. Get all test suites; +4. Delete a test case. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Create a test suite +Example:: + + { + 'action': 'create_sutie', + 'args': { + 'name': <suite_name>, + 'testcases': [ + 'opnfv_yardstick_tc002' + ] + } + } + + +METHOD: GET + + +Get a certain test suite's information +Example:: + + http://localhost:8888/api/v2/yardstick/testsuites/<suite_name> + + +METHOD: GET + + +Get all test suite +Example:: + + http://localhost:8888/api/v2/yardstick/testsuites + + +METHOD: DELETE + + +Delete a certain test suite +Example:: + + http://localhost:8888/api/v2/yardstick/testsuites/<suite_name> + + +/api/v2/yardstick/projects/action + +Description: This API is used to do some work related to yardstick test projects. For Euphrates, it supports: + +1. Create a Yardstick project; +2. Get a certain project's information; +3. Get all projects; +4. Delete a project. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Create a Yardstick project +Example:: + + { + 'action': 'create_project', + 'args': { + 'name': 'project1' + } + } + + +METHOD: GET + + +Get a certain project's information +Example:: + + http://localhost:8888/api/v2/yardstick/projects/<project_id> + + +METHOD: GET + + +Get all projects' information +Example:: + + http://localhost:8888/api/v2/yardstick/projects + + +METHOD: DELETE + + +Delete a certain project +Example:: + + http://localhost:8888/api/v2/yardstick/projects/<project_id> + + +/api/v2/yardstick/containers/action + +Description: This API is used to do some work related to Docker containers. For Euphrates, it supports: + +1. Create a Grafana Docker container; +2. Create an InfluxDB Docker container; +3. Get a certain container's information; +4. Delete a container. + +Which API to call will depend on the parameters. + + +METHOD: POST + + +Create a Grafana Docker container +Example:: + + { + 'action': 'create_grafana', + 'args': { + 'environment_id': <environment_id> + } + } + + +METHOD: POST + + +Create an InfluxDB Docker container +Example:: + + { + 'action': 'create_influxdb', + 'args': { + 'environment_id': <environment_id> + } + } + + +METHOD: GET + + +Get a certain container's information +Example:: + + http://localhost:8888/api/v2/yardstick/containers/<container_id> + + +METHOD: DELETE + + +Delete a certain container +Example:: + + http://localhost:8888/api/v2/yardstick/containers/<container_id> diff --git a/docs/testing/user/userguide/13-nsb-overview.rst b/docs/testing/user/userguide/11-nsb-overview.rst index faac61f08..8ce90f65d 100644 --- a/docs/testing/user/userguide/13-nsb-overview.rst +++ b/docs/testing/user/userguide/11-nsb-overview.rst @@ -3,12 +3,11 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, 2016-2017 Intel Corporation. -===================================== Network Services Benchmarking (NSB) -===================================== +=================================== Abstract -======== +-------- .. _Yardstick: https://wiki.opnfv.org/yardstick @@ -16,9 +15,9 @@ This chapter provides an overview of the NSB, a contribution to OPNFV Yardstick_ from Intel. Overview -======== +-------- -GOAL: Extend Yardstick to perform real world VNFs and NFVi Characterization and +The goal of NSB is to Extend Yardstick to perform real world VNFs and NFVi Characterization and benchmarking with repeatable and deterministic methods. The Network Service Benchmarking (NSB) extends the yardstick framework to do @@ -31,8 +30,7 @@ according to user defined profiles. NSB extension includes: - - Generic data models of Network Services, based on ETSI spec (ETSI GS NFV-TST 001) - .. _ETSI GS NFV-TST 001: http://www.etsi.org/deliver/etsi_gs/NFV-TST/001_099/001/01.01.01_60/gs_nfv-tst001v010101p.pdf + - Generic data models of Network Services, based on ETSI spec `ETSI GS NFV-TST 001 <http://www.etsi.org/deliver/etsi_gs/NFV-TST/001_099/001/01.01.01_60/gs_nfv-tst001v010101p.pdf>`_ - New Standalone context for VNF testing like SRIOV, OVS, OVS-DPDK etc @@ -72,7 +70,8 @@ NSB extension includes: - VNF KPIs, e.g., packet_in, packet_drop, packet_fwd etc Architecture -============ +------------ + The Network Service (NS) defines a set of Virtual Network Functions (VNF) connected together using NFV infrastructure. @@ -113,60 +112,60 @@ Network Service framework performs the necessary test steps. It may involve - Read the KPI's provided by particular VNF Components of Network Service ------------------------------- +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -* *Models for Network Service benchmarking*: The Network Service benchmarking - requires the proper modelling approach. The NSB provides models using Python - files and defining of NSDs and VNFDs. + * *Models for Network Service benchmarking*: The Network Service benchmarking + requires the proper modelling approach. The NSB provides models using Python + files and defining of NSDs and VNFDs. -The benchmark control application being a part of OPNFV yardstick can call -that python models to instantiate and configure the VNFs. Depending on -infrastructure type (bare-metal or fully virtualized) that calls could be -made directly or using MANO system. + The benchmark control application being a part of OPNFV yardstick can call + that python models to instantiate and configure the VNFs. Depending on + infrastructure type (bare-metal or fully virtualized) that calls could be + made directly or using MANO system. -* *Traffic generators in NSB*: Any benchmark application requires a set of - traffic generator and traffic profiles defining the method in which traffic - is generated. + * *Traffic generators in NSB*: Any benchmark application requires a set of + traffic generator and traffic profiles defining the method in which traffic + is generated. -The Network Service benchmarking model extends the Network Service -definition with a set of Traffic Generators (TG) that are treated -same way as other VNFs being a part of benchmarked network service. -Same as other VNFs the traffic generator are instantiated and terminated. + The Network Service benchmarking model extends the Network Service + definition with a set of Traffic Generators (TG) that are treated + same way as other VNFs being a part of benchmarked network service. + Same as other VNFs the traffic generator are instantiated and terminated. -Every traffic generator has own configuration defined as a traffic profile and -a set of KPIs supported. The python models for TG is extended by specific calls -to listen and generate traffic. + Every traffic generator has own configuration defined as a traffic profile and + a set of KPIs supported. The python models for TG is extended by specific calls + to listen and generate traffic. -* *The stateless TREX traffic generator*: The main traffic generator used as - Network Service stimulus is open source TREX tool. + * *The stateless TREX traffic generator*: The main traffic generator used as + Network Service stimulus is open source TREX tool. -The TREX tool can generate any kind of stateless traffic. + The TREX tool can generate any kind of stateless traffic. -.. code-block:: console + .. code-block:: console - +--------+ +-------+ +--------+ - | | | | | | - | Trex | ---> | VNF | ---> | Trex | - | | | | | | - +--------+ +-------+ +--------+ + +--------+ +-------+ +--------+ + | | | | | | + | Trex | ---> | VNF | ---> | Trex | + | | | | | | + +--------+ +-------+ +--------+ -Supported testcases scenarios: + Supported testcases scenarios: - - Correlated UDP traffic using TREX traffic generator and replay VNF. + - Correlated UDP traffic using TREX traffic generator and replay VNF. - - using different IMIX configuration like pure voice, pure video traffic etc + - using different IMIX configuration like pure voice, pure video traffic etc - - using different number IP flows like 1 flow, 1K, 16K, 64K, 256K, 1M flows + - using different number IP flows like 1 flow, 1K, 16K, 64K, 256K, 1M flows - - Using different number of rules configured like 1 rule, 1K, 10K rules + - Using different number of rules configured like 1 rule, 1K, 10K rules -For UDP correlated traffic following Key Performance Indicators are collected -for every combination of test case parameters: + For UDP correlated traffic following Key Performance Indicators are collected + for every combination of test case parameters: - - RFC2544 throughput for various loss rate defined (1% is a default) + - RFC2544 throughput for various loss rate defined (1% is a default) Graphical Overview -================== +------------------ NSB Testing with yardstick framework facilitate performance testing of various VNFs provided. @@ -192,3 +191,13 @@ VNFs provided. Figure 1: Network Service - 2 server configuration +VNFs supported for chracterization: +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +1. CGNAPT - Carrier Grade Network Address and port Translation +2. vFW - Virtual Firewall +3. vACL - Access Control List +5. Prox - Packet pROcessing eXecution engine: + - VNF can act as Drop, Basic Forwarding (no touch), L2 Forwarding (change MAC), GRE encap/decap, Load balance based on packet fields, Symmetric load balancing, + - QinQ encap/decap IPv4/IPv6, ARP, QoS, Routing, Unmpls, Policing, ACL +6. UDP_Replay diff --git a/docs/testing/user/userguide/12-nsb_installation.rst b/docs/testing/user/userguide/12-nsb_installation.rst new file mode 100644 index 000000000..8cc26acd5 --- /dev/null +++ b/docs/testing/user/userguide/12-nsb_installation.rst @@ -0,0 +1,849 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2016-2017 Intel Corporation. + +Yardstick - NSB Testing -Installation +===================================== + +Abstract +-------- + +The Network Service Benchmarking (NSB) extends the yardstick framework to do +VNF characterization and benchmarking in three different execution +environments viz., bare metal i.e. native Linux environment, standalone virtual +environment and managed virtualized environment (e.g. Open stack etc.). +It also brings in the capability to interact with external traffic generators +both hardware & software based for triggering and validating the traffic +according to user defined profiles. + +The steps needed to run Yardstick with NSB testing are: + +* Install Yardstick (NSB Testing). +* Setup/Reference pod.yaml describing Test topology +* Create/Reference the test configuration yaml file. +* Run the test case. + + +Prerequisites +------------- + +Refer chapter Yardstick Installation for more information on yardstick +prerequisites + +Several prerequisites are needed for Yardstick(VNF testing): + + - Python Modules: pyzmq, pika. + + - flex + + - bison + + - build-essential + + - automake + + - libtool + + - librabbitmq-dev + + - rabbitmq-server + + - collectd + + - intel-cmt-cat + +Hardware & Software Ingredients +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +SUT requirements: + + + +-----------+--------------------+ + | Item | Description | + +-----------+--------------------+ + | Memory | Min 20GB | + +-----------+--------------------+ + | NICs | 2 x 10G | + +-----------+--------------------+ + | OS | Ubuntu 16.04.3 LTS | + +-----------+--------------------+ + | kernel | 4.4.0-34-generic | + +-----------+--------------------+ + | DPDK | 17.02 | + +-----------+--------------------+ + +Boot and BIOS settings: + + + +------------------+---------------------------------------------------+ + | Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 | + | | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 | + | | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 | + | | iommu=on iommu=pt intel_iommu=on | + | | Note: nohz_full and rcu_nocbs is to disable Linux | + | | kernel interrupts | + +------------------+---------------------------------------------------+ + |BIOS | CPU Power and Performance Policy <Performance> | + | | CPU C-state Disabled | + | | CPU P-state Disabled | + | | Enhanced Intel® Speedstep® Tech Disabled | + | | Hyper-Threading Technology (If supported) Enabled | + | | Virtualization Techology Enabled | + | | Intel(R) VT for Direct I/O Enabled | + | | Coherency Enabled | + | | Turbo Boost Disabled | + +------------------+---------------------------------------------------+ + + + +Install Yardstick (NSB Testing) +------------------------------- + +Download the source code and install Yardstick from it + +.. code-block:: console + + git clone https://gerrit.opnfv.org/gerrit/yardstick + + cd yardstick + + # Switch to latest stable branch + # git checkout <tag or stable branch> + git checkout stable/euphrates + + # For Bare-Metal or Standalone Virtualization + ./nsb_setup.sh + + # For OpenStack + ./nsb_setup.sh <path to admin-openrc.sh> + + +Above command setup docker with latest yardstick code. To execute + +.. code-block:: console + + docker exec -it yardstick bash + +It will also automatically download all the packages needed for NSB Testing setup. +Refer chapter :doc:`04-installation` for more on docker **Install Yardstick using Docker (recommended)** + +System Topology: +---------------- + +.. code-block:: console + + +----------+ +----------+ + | | | | + | | (0)----->(0) | | + | TG1 | | DUT | + | | | | + | | (1)<-----(1) | | + +----------+ +----------+ + trafficgen_1 vnf + + +Environment parameters and credentials +-------------------------------------- + +Config yardstick conf +^^^^^^^^^^^^^^^^^^^^^ + +If user did not run 'yardstick env influxdb' inside the container, which will generate +correct yardstick.conf, then create the config file manually (run inside the container): + + cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf + vi /etc/yardstick/yardstick.conf + +Add trex_path, trex_client_lib and bin_path in 'nsb' section. + +:: + + [DEFAULT] + debug = True + dispatcher = file, influxdb + + [dispatcher_influxdb] + timeout = 5 + target = http://{YOUR_IP_HERE}:8086 + db_name = yardstick + username = root + password = root + + [nsb] + trex_path=/opt/nsb_bin/trex/scripts + bin_path=/opt/nsb_bin + trex_client_lib=/opt/nsb_bin/trex_client/stl + +Run Yardstick - Network Service Testcases +----------------------------------------- + + +NS testing - using yardstick CLI +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + See :doc:`04-installation` + +.. code-block:: console + + + docker exec -it yardstick /bin/bash + source /etc/yardstick/openstack.creds (only for heat TC if nsb_setup.sh was NOT used) + export EXTERNAL_NETWORK="<openstack public network>" (only for heat TC) + yardstick --debug task start yardstick/samples/vnf_samples/nsut/<vnf>/<test case> + +Network Service Benchmarking - Bare-Metal +----------------------------------------- + +Bare-Metal Config pod.yaml describing Topology +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Bare-Metal 2-Node setup: +######################## +.. code-block:: console + + +----------+ +----------+ + | | | | + | | (0)----->(0) | | + | TG1 | | DUT | + | | | | + | | (n)<-----(n) | | + +----------+ +----------+ + trafficgen_1 vnf + +Bare-Metal 3-Node setup - Correlated Traffic: +############################################# +.. code-block:: console + + +----------+ +----------+ +------------+ + | | | | | | + | | | | | | + | | (0)----->(0) | | | UDP | + | TG1 | | DUT | | Replay | + | | | | | | + | | | |(1)<---->(0)| | + +----------+ +----------+ +------------+ + trafficgen_1 vnf trafficgen_2 + + +Bare-Metal Config pod.yaml +^^^^^^^^^^^^^^^^^^^^^^^^^^ +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields.:: + + cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml + +.. code-block:: YAML + + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + + - + name: vnf + role: vnf + ip: 1.1.1.2 + user: root + password: r00t + host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:03" + + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.19" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:04" + routing_table: + - network: "152.16.100.20" + netmask: "255.255.255.0" + gateway: "152.16.100.20" + if: "xe0" + - network: "152.16.40.20" + netmask: "255.255.255.0" + gateway: "152.16.40.20" + if: "xe1" + nd_route_tbl: + - network: "0064:ff9b:0:0:0:0:9810:6414" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:6414" + if: "xe0" + - network: "0064:ff9b:0:0:0:0:9810:2814" + netmask: "112" + gateway: "0064:ff9b:0:0:0:0:9810:2814" + if: "xe1" + + +Network Service Benchmarking - Standalone Virtualization +-------------------------------------------------------- + +SR-IOV: +^^^^^^^ + +SR-IOV Pre-requisites +##################### + +On Host: + a) Create a bridge for VM to connect to external network + + .. code-block:: console + + brctl addbr br-int + brctl addif br-int <interface_name> #This interface is connected to internet + + b) Build guest image for VNF to run. + Most of the sample test cases in Yardstick are using a guest image called + ``yardstick-image`` which deviates from an Ubuntu Cloud Server image + Yardstick has a tool for building this custom image with samplevnf. + It is necessary to have ``sudo`` rights to use this tool. + + Also you may need to install several additional packages to use this tool, by + following the commands below:: + + sudo apt-get update && sudo apt-get install -y qemu-utils kpartx + + This image can be built using the following command in the directory where Yardstick is installed + + .. code-block:: console + + export YARD_IMG_ARCH='amd64' + sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers + + Please use ansible script to generate a cloud image refer to :doc:`04-installation` + + for more details refer to chapter :doc:`04-installation` + + .. note:: VM should be build with static IP and should be accessible from yardstick host. + + +SR-IOV Config pod.yaml describing Topology +########################################## + +SR-IOV 2-Node setup: +#################### +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | VF NIC | | VF NIC | + +--------+ +--------+ + ^ ^ + | | + | | + +----------+ +-------------------------+ + | | | ^ ^ | + | | | | | | + | | (0)<----->(0) | ------ | | + | TG1 | | SUT | | + | | | | | + | | (n)<----->(n) |------------------ | + +----------+ +-------------------------+ + trafficgen_1 host + + + +SR-IOV 3-Node setup - Correlated Traffic +######################################## +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | VF NIC | | VF NIC | + +--------+ +--------+ + ^ ^ + | | + | | + +----------+ +-------------------------+ +--------------+ + | | | ^ ^ | | | + | | | | | | | | + | | (0)<----->(0) | ------ | | | TG2 | + | TG1 | | SUT | | | (UDP Replay) | + | | | | | | | + | | (n)<----->(n) | ------ | (n)<-->(n) | | + +----------+ +-------------------------+ +--------------+ + trafficgen_1 host trafficgen_2 + +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields. + +.. code-block:: console + + cp <yardstick>/etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml + cp <yardstick>/etc/yardstick/nodes/standalone/host_sriov.yaml /etc/yardstick/nodes/standalone/host_sriov.yaml + +.. note:: Update all the required fields like ip, user, password, pcis, etc... + +SR-IOV Config pod_trex.yaml +########################### + +.. code-block:: YAML + + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + key_filename: /root/.ssh/id_rsa + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + +SR-IOV Config host_sriov.yaml +############################# + +.. code-block:: YAML + + nodes: + - + name: sriov + role: Sriov + ip: 192.168.100.101 + user: "" + password: "" + +SR-IOV testcase update: ``<yardstick>/samples/vnf_samples/nsut/vfw/tc_sriov_rfc2544_ipv4_1rule_1flow_64B_trex.yaml`` + +Update "contexts" section +""""""""""""""""""""""""" + +.. code-block:: YAML + + contexts: + - name: yardstick + type: Node + file: /etc/yardstick/nodes/standalone/pod_trex.yaml + - type: StandaloneSriov + file: /etc/yardstick/nodes/standalone/host_sriov.yaml + name: yardstick + vm_deploy: True + flavor: + images: "/var/lib/libvirt/images/ubuntu.qcow2" + ram: 4096 + extra_specs: + hw:cpu_sockets: 1 + hw:cpu_cores: 6 + hw:cpu_threads: 2 + user: "" # update VM username + password: "" # update password + servers: + vnf: + network_ports: + mgmt: + cidr: '1.1.1.61/24' # Update VM IP address, if static, <ip>/<mask> or if dynamic, <start of ip>/<mask> + xe0: + - uplink_0 + xe1: + - downlink_0 + networks: + uplink_0: + phy_port: "0000:05:00.0" + vpci: "0000:00:07.0" + cidr: '152.16.100.10/24' + gateway_ip: '152.16.100.20' + downlink_0: + phy_port: "0000:05:00.1" + vpci: "0000:00:08.0" + cidr: '152.16.40.10/24' + gateway_ip: '152.16.100.20' + + + +OVS-DPDK: +^^^^^^^^^ + +OVS-DPDK Pre-requisites +####################### + +On Host: + a) Create a bridge for VM to connect to external network + + .. code-block:: console + + brctl addbr br-int + brctl addif br-int <interface_name> #This interface is connected to internet + + b) Build guest image for VNF to run. + Most of the sample test cases in Yardstick are using a guest image called + ``yardstick-image`` which deviates from an Ubuntu Cloud Server image + Yardstick has a tool for building this custom image with samplevnf. + It is necessary to have ``sudo`` rights to use this tool. + + Also you may need to install several additional packages to use this tool, by + following the commands below:: + + sudo apt-get update && sudo apt-get install -y qemu-utils kpartx + + This image can be built using the following command in the directory where Yardstick is installed:: + + export YARD_IMG_ARCH='amd64' + sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers + sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh + + for more details refer to chapter :doc:`04-installation` + + .. note:: VM should be build with static IP and should be accessible from yardstick host. + + c) OVS & DPDK version. + - OVS 2.7 and DPDK 16.11.1 above version is supported + + d) Setup OVS/DPDK on host. + Please refer to below link on how to setup `OVS-DPDK <http://docs.openvswitch.org/en/latest/intro/install/dpdk/>`_ + + +OVS-DPDK Config pod.yaml describing Topology +############################################ + +OVS-DPDK 2-Node setup: +###################### + + +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | virtio | | virtio | + +--------+ +--------+ + ^ ^ + | | + | | + +--------+ +--------+ + | vHOST0 | | vHOST1 | + +----------+ +-------------------------+ + | | | ^ ^ | + | | | | | | + | | (0)<----->(0) | ------ | | + | TG1 | | SUT | | + | | | (ovs-dpdk) | | + | | (n)<----->(n) |------------------ | + +----------+ +-------------------------+ + trafficgen_1 host + + +OVS-DPDK 3-Node setup - Correlated Traffic +########################################## + +.. code-block:: console + + +--------------------+ + | | + | | + | DUT | + | (VNF) | + | | + +--------------------+ + | virtio | | virtio | + +--------+ +--------+ + ^ ^ + | | + | | + +--------+ +--------+ + | vHOST0 | | vHOST1 | + +----------+ +-------------------------+ +------------+ + | | | ^ ^ | | | + | | | | | | | | + | | (0)<----->(0) | ------ | | | TG2 | + | TG1 | | SUT | | |(UDP Replay)| + | | | (ovs-dpdk) | | | | + | | (n)<----->(n) | ------ |(n)<-->(n)| | + +----------+ +-------------------------+ +------------+ + trafficgen_1 host trafficgen_2 + + +Before executing Yardstick test cases, make sure that pod.yaml reflects the +topology and update all the required fields. + +.. code-block:: console + + cp <yardstick>/etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml + cp <yardstick>/etc/yardstick/nodes/standalone/host_ovs.yaml /etc/yardstick/nodes/standalone/host_ovs.yaml + +.. note:: Update all the required fields like ip, user, password, pcis, etc... + +OVS-DPDK Config pod_trex.yaml +############################# + +.. code-block:: YAML + + nodes: + - + name: trafficgen_1 + role: TrafficGen + ip: 1.1.1.1 + user: root + password: r00t + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.0" + driver: i40e # default kernel driver + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.255.0" + local_mac: "00:00:00:00:00:01" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "0000:07:00.1" + driver: i40e # default kernel driver + dpdk_port_num: 1 + local_ip: "152.16.40.20" + netmask: "255.255.255.0" + local_mac: "00:00.00:00:00:02" + +OVS-DPDK Config host_ovs.yaml +############################# + +.. code-block:: YAML + + nodes: + - + name: ovs_dpdk + role: OvsDpdk + ip: 192.168.100.101 + user: "" + password: "" + +ovs_dpdk testcase update: ``<yardstick>/samples/vnf_samples/nsut/vfw/tc_ovs_rfc2544_ipv4_1rule_1flow_64B_trex.yaml`` + +Update "contexts" section +""""""""""""""""""""""""" + +.. code-block:: YAML + + contexts: + - name: yardstick + type: Node + file: /etc/yardstick/nodes/standalone/pod_trex.yaml + - type: StandaloneOvsDpdk + name: yardstick + file: /etc/yardstick/nodes/standalone/pod_ovs.yaml + vm_deploy: True + ovs_properties: + version: + ovs: 2.7.0 + dpdk: 16.11.1 + pmd_threads: 2 + ram: + socket_0: 2048 + socket_1: 2048 + queues: 4 + vpath: "/usr/local" + + flavor: + images: "/var/lib/libvirt/images/ubuntu.qcow2" + ram: 4096 + extra_specs: + hw:cpu_sockets: 1 + hw:cpu_cores: 6 + hw:cpu_threads: 2 + user: "" # update VM username + password: "" # update password + servers: + vnf: + network_ports: + mgmt: + cidr: '1.1.1.61/24' # Update VM IP address, if static, <ip>/<mask> or if dynamic, <start of ip>/<mask> + xe0: + - uplink_0 + xe1: + - downlink_0 + networks: + uplink_0: + phy_port: "0000:05:00.0" + vpci: "0000:00:07.0" + cidr: '152.16.100.10/24' + gateway_ip: '152.16.100.20' + downlink_0: + phy_port: "0000:05:00.1" + vpci: "0000:00:08.0" + cidr: '152.16.40.10/24' + gateway_ip: '152.16.100.20' + + +Enabling other Traffic generator +-------------------------------- + +IxLoad: +^^^^^^^ + +1. Software needed: IxLoadAPI ``<IxLoadTclApi verson>Linux64.bin.tgz and <IxOS version>Linux64.bin.tar.gz`` (Download from ixia support site) + Install - ``<IxLoadTclApi verson>Linux64.bin.tgz & <IxOS version>Linux64.bin.tar.gz`` + If the installation was not done inside the container, after installing the IXIA client, + check /opt/ixia/ixload/<ver>/bin/ixloadpython and make sure you can run this cmd + inside the yardstick container. Usually user is required to copy or link /opt/ixia/python/<ver>/bin/ixiapython + to /usr/bin/ixiapython<ver> inside the container. + +2. Update pod_ixia.yaml file with ixia details. + + .. code-block:: console + + cp <repo>/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia etc/yardstick/nodes/pod_ixia.yaml + + Config pod_ixia.yaml + + .. code-block:: yaml + + + nodes: + - + name: trafficgen_1 + role: IxNet + ip: 1.2.1.1 #ixia machine ip + user: user + password: r00t + key_filename: /root/.ssh/id_rsa + tg_config: + ixchassis: "1.2.1.7" #ixia chassis ip + tcl_port: "8009" # tcl server port + lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" + root_dir: "/opt/ixia/ixos-api/8.01.0.2/" + py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" + py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" + dut_result_dir: "/mnt/ixia" + version: 8.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "2:5" # Card:port + driver: "none" + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.0.0" + local_mac: "00:98:10:64:14:00" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "2:6" # [(Card, port)] + driver: "none" + dpdk_port_num: 1 + local_ip: "152.40.40.20" + netmask: "255.255.0.0" + local_mac: "00:98:28:28:14:00" + + for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration + +3. Start IxOS TCL Server (Install 'Ixia IxExplorer IxOS <version>') + You will also need to configure the IxLoad machine to start the IXIA + IxosTclServer. This can be started like so: + + - Connect to the IxLoad machine using RDP + - Go to: + ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1`` + or + ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"`` + +4. Create a folder "Results" in c:\ and share the folder on the network. + +5. execute testcase in samplevnf folder. + eg ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_http_ixload_1b_Requests-65000_Concurrency.yaml`` + +IxNetwork: +^^^^^^^^^^ + +1. Software needed: ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` (Download from ixia support site) + Install - ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` +2. Update pod_ixia.yaml file with ixia details. + + .. code-block:: console + + cp <repo>/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia etc/yardstick/nodes/pod_ixia.yaml + + Config pod_ixia.yaml + + .. code-block:: yaml + + nodes: + - + name: trafficgen_1 + role: IxNet + ip: 1.2.1.1 #ixia machine ip + user: user + password: r00t + key_filename: /root/.ssh/id_rsa + tg_config: + ixchassis: "1.2.1.7" #ixia chassis ip + tcl_port: "8009" # tcl server port + lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" + root_dir: "/opt/ixia/ixos-api/8.01.0.2/" + py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" + py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" + dut_result_dir: "/mnt/ixia" + version: 8.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "2:5" # Card:port + driver: "none" + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.0.0" + local_mac: "00:98:10:64:14:00" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "2:6" # [(Card, port)] + driver: "none" + dpdk_port_num: 1 + local_ip: "152.40.40.20" + netmask: "255.255.0.0" + local_mac: "00:98:28:28:14:00" + + for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration + +3. Start IxNetwork TCL Server + You will also need to configure the IxNetwork machine to start the IXIA + IxNetworkTclServer. This can be started like so: + + - Connect to the IxNetwork machine using RDP + - Go to: ``Start->Programs->Ixia->IxNetwork->IxNetwork 7.21.893.14 GA->IxNetworkTclServer`` (or ``IxNetworkApiServer``) + +4. execute testcase in samplevnf folder. + eg ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_rfc2544_ipv4_1rule_1flow_64B_ixia.yaml`` + diff --git a/docs/testing/user/userguide/13-nsb_operation.rst b/docs/testing/user/userguide/13-nsb_operation.rst new file mode 100644 index 000000000..8c477fa3f --- /dev/null +++ b/docs/testing/user/userguide/13-nsb_operation.rst @@ -0,0 +1,270 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2016-2017 Intel Corporation. + +Yardstick - NSB Testing - Operation +=================================== + +Abstract +-------- + +NSB test configuration and OpenStack setup requirements + + +OpenStack Network Configuration +------------------------------- + +NSB requires certain OpenStack deployment configurations. +For optimal VNF characterization using external traffic generators NSB requires +provider/external networks. + + +Provider networks +^^^^^^^^^^^^^^^^^ + +The VNFs require a clear L2 connect to the external network in order to generate +realistic traffic from multiple address ranges and port + +In order to prevent Neutron from filtering traffic we have to disable Neutron Port Security. +We also disable DHCP on the data ports because we are binding the ports to DPDK and do not need +DHCP addresses. We also disable gateways because multiple default gateways can prevent SSH access +to the VNF from the floating IP. We only want a gateway on the mgmt network + +.. code-block:: yaml + + uplink_0: + cidr: '10.1.0.0/24' + gateway_ip: 'null' + port_security_enabled: False + enable_dhcp: 'false' + +Heat Topologies +^^^^^^^^^^^^^^^ + +By default Heat will attach every node to every Neutron network that is created. +For scale-out tests we do not want to attach every node to every network. + +For each node you can specify which ports are on which network using the +network_ports dictionary. + +In this example we have ``TRex xe0 <-> xe0 VNF xe1 <-> xe0 UDP_Replay`` + +.. code-block:: yaml + + vnf_0: + floating_ip: true + placement: "pgrp1" + network_ports: + mgmt: + - mgmt + uplink_0: + - xe0 + downlink_0: + - xe1 + tg_0: + floating_ip: true + placement: "pgrp1" + network_ports: + mgmt: + - mgmt + uplink_0: + - xe0 + # Trex always needs two ports + uplink_1: + - xe1 + tg_1: + floating_ip: true + placement: "pgrp1" + network_ports: + mgmt: + - mgmt + downlink_0: + - xe0 + +Collectd KPIs +------------- + +NSB can collect KPIs from collected. We have support for various plugins enabled by the +Barometer project. + +The default yardstick-samplevnf has collectd installed. This allows for collecting KPIs +from the VNF. + +Collecting KPIs from the NFVi is more complicated and requires manual setup. +We assume that collectd is not installed on the compute nodes. + +To collectd KPIs from the NFVi compute nodes: + + + * install_collectd on the compute nodes + * create pod.yaml for the compute nodes + * enable specific plugins depending on the vswitch and DPDK + + example pod.yaml section for Compute node running collectd. + +.. code-block:: yaml + + - + name: "compute-1" + role: Compute + ip: "10.1.2.3" + user: "root" + ssh_port: "22" + password: "" + collectd: + interval: 5 + plugins: + # for libvirtd stats + virt: {} + intel_pmu: {} + ovs_stats: + # path to OVS socket + ovs_socket_path: /var/run/openvswitch/db.sock + intel_rdt: {} + + + +Scale-Up +------------------ + +VNFs performance data with scale-up + + * Helps to figure out optimal number of cores specification in the Virtual Machine template creation or VNF + * Helps in comparison between different VNF vendor offerings + * Better the scale-up index, indicates the performance scalability of a particular solution + +Heat +^^^^ + +For VNF scale-up tests we increase the number for VNF worker threads. In the case of VNFs +we also need to increase the number of VCPUs and memory allocated to the VNF. + +An example scale-up Heat testcase is: + +.. code-block:: console + + <repo>/samples/vnf_samples/nsut/acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_scale_up.yaml + +This testcase template requires specifying the number of VCPUs and Memory. +We set the VCPUs and memory using the --task-args options + +.. code-block:: console + + yardstick --debug task start --task-args='{"mem": 20480, "vcpus": 10}' samples/vnf_samples/nsut/acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex_scale_up.yaml + + +Baremetal +^^^^^^^^^ + 1. Follow above traffic generator section to setup. + 2. edit num of threads in ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_rfc2544_ipv4_1rule_1flow_64B_trex_scale_up.yaml`` + + e.g, 6 Threads for given VNF + +.. code-block:: yaml + + + schema: yardstick:task:0.1 + scenarios: + {% for worker_thread in [1, 2 ,3 , 4, 5, 6] %} + - type: NSPerf + traffic_profile: ../../traffic_profiles/ipv4_throughput.yaml + topology: vfw-tg-topology.yaml + nodes: + tg__0: trafficgen_1.yardstick + vnf__0: vnf.yardstick + options: + framesize: + uplink: {64B: 100} + downlink: {64B: 100} + flow: + src_ip: [{'tg__0': 'xe0'}] + dst_ip: [{'tg__0': 'xe1'}] + count: 1 + traffic_type: 4 + rfc2544: + allowed_drop_rate: 0.0001 - 0.0001 + vnf__0: + rules: acl_1rule.yaml + vnf_config: {lb_config: 'HW', lb_count: 1, worker_config: '1C/1T', worker_threads: {{worker_thread}}} + nfvi_enable: True + runner: + type: Iteration + iterations: 10 + interval: 35 + {% endfor %} + context: + type: Node + name: yardstick + nfvi_type: baremetal + file: /etc/yardstick/nodes/pod.yaml + +Scale-Out +-------------------- + +VNFs performance data with scale-out + + * Helps in capacity planning to meet the given network node requirements + * Helps in comparison between different VNF vendor offerings + * Better the scale-out index, provides the flexibility in meeting future capacity requirements + + +Standalone +^^^^^^^^^^ + +Scale-out not supported on Baremetal. + +1. Follow above traffic generator section to setup. +2. Generate testcase for standalone virtualization using ansible scripts + + .. code-block:: console + + cd <repo>/ansible + trex: standalone_ovs_scale_out_trex_test.yaml or standalone_sriov_scale_out_trex_test.yaml + ixia: standalone_ovs_scale_out_ixia_test.yaml or standalone_sriov_scale_out_ixia_test.yaml + ixia_correlated: standalone_ovs_scale_out_ixia_correlated_test.yaml or standalone_sriov_scale_out_ixia_correlated_test.yaml + + update the ovs_dpdk or sriov above Ansible scripts reflect the setup + +3. run the test + + .. code-block:: console + + <repo>/samples/vnf_samples/nsut/tc_sriov_vfw_udp_ixia_correlated_scale_out-1.yaml + <repo>/samples/vnf_samples/nsut/tc_sriov_vfw_udp_ixia_correlated_scale_out-2.yaml + +Heat +^^^^ + +There are sample scale-out all-VM Heat tests. These tests only use VMs and don't use external traffic. + +The tests use UDP_Replay and correlated traffic. + +.. code-block:: console + + <repo>/samples/vnf_samples/nsut/cgnapt/tc_heat_rfc2544_ipv4_1flow_64B_trex_correlated_scale_4.yaml + +To run the test you need to increase OpenStack CPU, Memory and Port quotas. + + +Traffic Generator tuning +------------------------ + +The TRex traffic generator can be setup to use multiple threads per core, this is for multiqueue testing. + +TRex does not automatically enable multiple threads because we currently cannot detect the number of queues on a device. + +To enable multiple queue set the queues_per_port value in the TG VNF options section. + +.. code-block:: yaml + + scenarios: + - type: NSPerf + nodes: + tg__0: tg_0.yardstick + + options: + tg_0: + queues_per_port: 2 + + diff --git a/docs/testing/user/userguide/14-nsb_installation.rst b/docs/testing/user/userguide/14-nsb_installation.rst deleted file mode 100644 index 7c5327964..000000000 --- a/docs/testing/user/userguide/14-nsb_installation.rst +++ /dev/null @@ -1,239 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, 2016-2017 Intel Corporation. - -Yardstick - NSB Testing -Installation -===================================== - -Abstract --------- - -The Network Service Benchmarking (NSB) extends the yardstick framework to do -VNF characterization and benchmarking in three different execution -environments viz., bare metal i.e. native Linux environment, standalone virtual -environment and managed virtualized environment (e.g. Open stack etc.). -It also brings in the capability to interact with external traffic generators -both hardware & software based for triggering and validating the traffic -according to user defined profiles. - -The steps needed to run Yardstick with NSB testing are: - -* Install Yardstick (NSB Testing). -* Setup pod.yaml describing Test topology -* Create the test configuration yaml file. -* Run the test case. - - -Prerequisites -------------- - -Refer chapter Yardstick Instalaltion for more information on yardstick -prerequisites - -Several prerequisites are needed for Yardstick(VNF testing): - -- Python Modules: pyzmq, pika. - -- flex - -- bison - -- build-essential - -- automake - -- libtool - -- librabbitmq-dev - -- rabbitmq-server - -- collectd - -- intel-cmt-cat - -Install Yardstick (NSB Testing) -------------------------------- - -Refer chapter :doc:`04-installation` for more information on installing *Yardstick* - -After *Yardstick* is installed, executing the "nsb_setup.sh" script to setup -NSB testing. - -:: - - ./nsb_setup.sh - -It will also automatically download all the packages needed for NSB Testing setup. - -System Topology: ------------------ - -.. code-block:: console - - +----------+ +----------+ - | | | | - | | (0)----->(0) | Ping/ | - | TG1 | | vPE/ | - | | | 2Trex | - | | (1)<-----(1) | | - +----------+ +----------+ - trafficgen_1 vnf - - -OpenStack parameters and credentials ------------------------------------- - -Environment variables -^^^^^^^^^^^^^^^^^^^^^ - -Before running Yardstick (NSB Testing) it is necessary to export traffic -generator libraries. - -:: - - source ~/.bash_profile - -Config yardstick conf -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -:: - - cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf - vi /etc/yardstick/yardstick.conf - -Add trex_path, trex_client_lib and bin_path in 'nsb' section. - -:: - - [DEFAULT] - debug = True - dispatcher = influxdb - - [dispatcher_influxdb] - timeout = 5 - target = http://{YOUR_IP_HERE}:8086 - db_name = yardstick - username = root - password = root - - [nsb] - trex_path=/opt/nsb_bin/trex/scripts - bin_path=/opt/nsb_bin - trex_client_lib=/opt/nsb_bin/trex_client/stl - - -Config pod.yaml describing Topology -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing Yardstick test cases, make sure that pod.yaml reflects the -topology and update all the required fields. - -:: - - cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml - -Config pod.yaml -:: - nodes: - - - name: trafficgen_1 - role: TrafficGen - ip: 1.1.1.1 - user: root - password: r00t - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:01" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.20" - netmask: "255.255.255.0" - local_mac: "00:00.00:00:00:02" - - - - name: vnf - role: vnf - ip: 1.1.1.2 - user: root - password: r00t - host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.19" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:03" - - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.19" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:04" - routing_table: - - network: "152.16.100.20" - netmask: "255.255.255.0" - gateway: "152.16.100.20" - if: "xe0" - - network: "152.16.40.20" - netmask: "255.255.255.0" - gateway: "152.16.40.20" - if: "xe1" - nd_route_tbl: - - network: "0064:ff9b:0:0:0:0:9810:6414" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:6414" - if: "xe0" - - network: "0064:ff9b:0:0:0:0:9810:2814" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:2814" - if: "xe1" - -Enable yardstick virtual environment -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing yardstick test cases, make sure to activate yardstick -python virtual environment - -:: - - source /opt/nsb_bin/yardstick_venv/bin/activate - - -Run Yardstick - Network Service Testcases ------------------------------------------ - -NS testing - using NSBperf CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - source /opt/nsb_setup/yardstick_venv/bin/activate - PYTHONPATH: ". ~/.bash_profile" - cd <yardstick_repo>/yardstick/cmd - - Execute command: ./NSPerf.py -h - ./NSBperf.py --vnf <selected vnf> --test <rfc test> - eg: ./NSBperf.py --vnf vpe --test tc_baremetal_rfc2544_ipv4_1flow_64B.yaml - -NS testing - using yardstick CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - source /opt/nsb_setup/yardstick_venv/bin/activate - PYTHONPATH: ". ~/.bash_profile" - -Go to test case forlder type we want to execute. - e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/ - run: yardstick --debug task start <test_case.yaml> diff --git a/docs/testing/user/userguide/15-list-of-tcs.rst b/docs/testing/user/userguide/15-list-of-tcs.rst index 1b5806cd9..b62bf6390 100644 --- a/docs/testing/user/userguide/15-list-of-tcs.rst +++ b/docs/testing/user/userguide/15-list-of-tcs.rst @@ -50,8 +50,14 @@ Generic NFVI Test Case Descriptions opnfv_yardstick_tc071.rst opnfv_yardstick_tc072.rst opnfv_yardstick_tc073.rst + opnfv_yardstick_tc074.rst opnfv_yardstick_tc075.rst opnfv_yardstick_tc076.rst + opnfv_yardstick_tc078.rst + opnfv_yardstick_tc079.rst + opnfv_yardstick_tc080.rst + opnfv_yardstick_tc081.rst + opnfv_yardstick_tc083.rst OPNFV Feature Test Cases ======================== diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst index 3b55b7f9b..61e157e52 100644 --- a/docs/testing/user/userguide/index.rst +++ b/docs/testing/user/userguide/index.rst @@ -5,9 +5,9 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Ericsson AB and others. -=========================================== -Performance Testing User Guide (Yardstick) -=========================================== +******************** +Yardstick User Guide +******************** .. toctree:: :maxdepth: 4 @@ -23,8 +23,10 @@ Performance Testing User Guide (Yardstick) 08-api 09-yardstick_user_interface 10-vtc-overview - 13-nsb-overview - 14-nsb_installation + 11-nsb-overview + 12-nsb_installation + 13-nsb_operation 15-list-of-tcs + nsb/nsb-list-of-tcs glossary references diff --git a/docs/testing/user/userguide/nsb/nsb-list-of-tcs.rst b/docs/testing/user/userguide/nsb/nsb-list-of-tcs.rst new file mode 100644 index 000000000..43aa3d69a --- /dev/null +++ b/docs/testing/user/userguide/nsb/nsb-list-of-tcs.rst @@ -0,0 +1,28 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +===================== +NSB Sample Test Cases +===================== + +Abstract +======== + +This chapter lists available NSB test cases. + +NSB PROX Test Case Descriptions +=============================== + +.. toctree:: + :maxdepth: 1 + + tc_prox_context_acl_port + tc_prox_context_bng_port + tc_prox_context_bng_qos_port + tc_prox_context_l2fwd_port + tc_prox_context_l3fwd_port + tc_prox_context_mpls_tagging_port + tc_prox_context_buffering_port + tc_prox_context_load_balancer_port diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_acl_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_acl_port.rst new file mode 100644 index 000000000..137486151 --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_acl_port.rst @@ -0,0 +1,112 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +********************************************* +Yardstick Test Case Description: NSB PROX ACL +********************************************* + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_acl-{port_num} | +| | | +| | * context = baremetal or heat_context; | +| | * port_num = 2 or 4; | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | This test allows to measure how well the SUT can exploit | +| | structures in the list of ACL rules. | +| | The ACL rules are matched against a 7-tuple of the input | +| | packet: the regular 5-tuple and two VLAN tags. | +| | The rules in the rule set allow the packet to be forwarded | +| | and the rule set contains a default "match all" rule. | +| | | +| | The KPI is measured with the rule set that has a moderate | +| | number of rules with moderate similarity between the rules & | +| | the fraction of rules that were used. | +| | | +| | The ACL test cases are implemented to run in baremetal | +| | and heat context for 2 port and 4 port configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The ACL test cases are listed below: | +| | | +| | * tc_prox_baremetal_acl-2.yaml | +| | * tc_prox_baremetal_acl-4.yaml | +| | * tc_prox_heat_context_acl-2.yaml | +| | * tc_prox_heat_context_acl-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | Packet size set as 64 bytes in traffic profile. | +| | These can be configured | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | This PROX ACL test cases can be configured with different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. The test need multi-queue enabled in Glance image. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(ACL workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 64 bytes | +| | packet size with an accepted minimal packet loss for the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_bng_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_bng_port.rst new file mode 100644 index 000000000..b674846ff --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_bng_port.rst @@ -0,0 +1,109 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +********************************************* +Yardstick Test Case Description: NSB PROX BNG +********************************************* + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_bng-{port_num} | +| | | +| | * context = baremetal or heat_context; | +| | * port_num = 4; | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The BNG workload converts packets from QinQ to GRE tunnels, | +| | handles routing and adds/removes MPLS tags. | +| | This use case simulates a realistic and complex application. | +| | The number of users is 32K per port and the number of routes | +| | is 8K. | +| | | +| | The BNG test cases are implemented to run in baremetal | +| | and heat context an require 4 port topology to run the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The BNG test cases are listed below: | +| | | +| | * tc_prox_baremetal_bng-2.yaml | +| | * tc_prox_baremetal_bng-4.yaml | +| | * tc_prox_heat_context_bng-2.yaml | +| | * tc_prox_heat_context_bng-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | The minimum packet size for BNG test is 78 bytes. This is | +| | set in the BNG traffic profile and can be configured to use | +| | a higher packet size for the test. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | The PROX BNG test cases can be configured with different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. The test need multi-queue enabled in Glance image. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(BNG workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 78 bytes | +| | packet size with an accepted minimal packet loss for the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_bng_qos_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_bng_qos_port.rst new file mode 100644 index 000000000..5270634ac --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_bng_qos_port.rst @@ -0,0 +1,111 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +************************************************* +Yardstick Test Case Description: NSB PROX BNG_QoS +************************************************* + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_bng_qos-{port_num} | +| | | +| | * context = baremetal or heat_context; | +| | * port_num = 4; | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The BNG+QoS workload converts packets from QinQ to GRE | +| | tunnels, handles routing and adds/removes MPLS tags and | +| | performs a QoS. | +| | This use case simulates a realistic and complex application. | +| | The number of users is 32K per port and the number of routes | +| | is 8K. | +| | | +| | The BNG_QoS test cases are implemented to run in baremetal | +| | and heat context an require 4 port topology to run the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The BNG_QoS test cases are listed below: | +| | | +| | * tc_prox_baremetal_bng_qos-2.yaml | +| | * tc_prox_baremetal_bng_qos-4.yaml | +| | * tc_prox_heat_context_bng_qos-2.yaml | +| | * tc_prox_heat_context_bng_qos-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | The minumum packet size for BNG_QoS test is 78 bytes. This | +| | is set in the bng_qos traffic profile and can be configured | +| | to use a higher packet size for the test. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | This PROX BNG_QoS test cases can be configured with | +| | different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. The test need multi-queue enabled in Glance image. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(BNG_QoS workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 78 bytes | +| | packet size with an accepted minimal packet loss for the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_buffering_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_buffering_port.rst new file mode 100644 index 000000000..0ab242cf2 --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_buffering_port.rst @@ -0,0 +1,107 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +********************************************************** +Yardstick Test Case Description: NSB PROX Packet Buffering +********************************************************** + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_buffering-{port_num} | +| | | +| | * context = baremetal or heat_context | +| | * port_num = 1 | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | This test measures the impact of the condition when packets | +| | get buffered, thus they stay in memory for the extended | +| | period of time, 125ms in this case. | +| | | +| | The Packet Buffering test cases are implemented to run in | +| | baremetal and heat context. | +| | | +| | The test runs only on the first port of the SUT. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The Packet Buffering test cases are listed below: | +| | | +| | * tc_prox_baremetal_buffering-1.yaml | +| | * tc_prox_heat_context_buffering-1.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | The minimum packet size for Buffering test is 64 bytes. This | +| | is set in the traffic profile and can be configured to use | +| | a higher packet size for the test. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | The PROX Packet Buffering test cases can be configured with | +| | different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. The test need multi-queue enabled in Glance image. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(Packet Buffering workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI in this test is the maximum number of packets that | +| | can be forwarded given the requirement that the latency of | +| | each packet is at least 125 millisecond. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_l2fwd_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_l2fwd_port.rst new file mode 100644 index 000000000..82cb64fe5 --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_l2fwd_port.rst @@ -0,0 +1,120 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +*********************************************** +Yardstick Test Case Description: NSB PROX L2FWD +*********************************************** + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_l2fwd-{port_num} | +| | | +| | * context = baremetal or heat_context; | +| | * port_num = 2 or 4; | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The PROX L2FWD test has 3 types of test cases: | +| | L2FWD: The application will take packets in from one port | +| | and forward them unmodified to another port | +| | L2FWD_Packet_Touch: The application will take packets in | +| | from one port, update src and dst MACs and forward them to | +| | another port. | +| | L2FWD_Multi_Flow: The application will take packets in | +| | from one port, update src and dst MACs and forward them to | +| | another port. This test case exercises the softswitch | +| | with 200k flows. | +| | | +| | The above test cases are implemented for baremetal and heat | +| | context for 2 port and 4 port configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The L2FWD test cases are listed below: | +| | | +| | * tc_prox_baremetal_l2fwd-2.yaml | +| | * tc_prox_baremetal_l2fwd-4.yaml | +| | * tc_prox_baremetal_l2fwd_pktTouch-2.yaml | +| | * tc_prox_baremetal_l2fwd_pktTouch-4.yaml | +| | * tc_prox_baremetal_l2fwd_multiflow-2.yaml | +| | * tc_prox_baremetal_l2fwd_multiflow-4.yaml | +| | * tc_prox_heat_context_l2fwd-2.yaml | +| | * tc_prox_heat_context_l2fwd-4.yaml | +| | * tc_prox_heat_context_l2fwd_pktTouch-2.yaml | +| | * tc_prox_heat_context_l2fwd_pktTouch-4.yaml | +| | * tc_prox_heat_context_l2fwd_multiflow-2.yaml | +| | * tc_prox_heat_context_l2fwd_multiflow-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | Packet size set as 64 bytes in traffic profile | +| | These can be configured | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | The PROX L2FWD test cases can be configured with different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(L2FWD workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 64 bytes | +| | packet size with an accepted minimal packet loss for the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_l3fwd_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_l3fwd_port.rst new file mode 100644 index 000000000..87cc10360 --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_l3fwd_port.rst @@ -0,0 +1,105 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +*********************************************** +Yardstick Test Case Description: NSB PROX L3FWD +*********************************************** + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_l3fwd-{port_num} | +| | | +| | * context = baremetal or heat_context; | +| | * port_num = 2 or 4; | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The PROX L3FWD application performs basic routing of packets | +| | with LPM based look-up method. | +| | | +| | The L3FWD test cases are implemented for baremetal and heat | +| | context for 2 port and 4 port configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The L3FWD test cases are listed below: | +| | | +| | * tc_prox_baremetal_l3fwd-2.yaml | +| | * tc_prox_baremetal_l3fwd-4.yaml | +| | * tc_prox_heat_context_l3fwd-2.yaml | +| | * tc_prox_heat_context_l3fwd-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | The minimum packet size for L3FWD test is 64 bytes. This is | +| | set in the traffic profile and can be configured to use | +| | a higher packet size for the test. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | This PROX L3FWD test cases can be configured with different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. The test need multi-queue enabled in Glance image. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(L3FWD workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packet to the VNF. If the number of dropped | +| | packets is more than the tolerated loss the line rate | +| | or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 64 byte | +| | packets with an accepted minimal packet loss for the default | +| | configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_load_balancer_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_load_balancer_port.rst new file mode 100644 index 000000000..ada02f829 --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_load_balancer_port.rst @@ -0,0 +1,109 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +******************************************************* +Yardstick Test Case Description: NSB PROX Load Balancer +******************************************************* + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_lb-{port_num} | +| | | +| | * context = baremetal or heat_context | +| | * port_num = 4 | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The applciation transmits packets on one port and revieves | +| | them on 4 ports. | +| | The conventional 5-tuple is used in this test as it requires | +| | some extraction steps and allows defining enough distinct | +| | values to find the performance limits. | +| | | +| | The load is increased (adding more ports if needed) while | +| | packets are load balanced using a hash table of 8M entries | +| | | +| | The number of packets per second that can be forwarded | +| | determines the KPI. The default packet size is 64 bytes. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The Load Balancer test cases are listed below: | +| | | +| | * tc_prox_baremetal_lb-4.yaml | +| | * tc_prox_heat_context_lb-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | Packet size set as 64 bytes in traffic profile. | +| | These can be configured | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | The PROX Load Balancer test cases can be configured with | +| | different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. The test need multi-queue enabled in Glance image. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(Load Balancer workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 78 bytes | +| | packet size with an accepted minimal packet loss for the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/nsb/tc_prox_context_mpls_tagging_port.rst b/docs/testing/user/userguide/nsb/tc_prox_context_mpls_tagging_port.rst new file mode 100644 index 000000000..cef859996 --- /dev/null +++ b/docs/testing/user/userguide/nsb/tc_prox_context_mpls_tagging_port.rst @@ -0,0 +1,109 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, 2017 Intel Corporation. + +****************************************************** +Yardstick Test Case Description: NSB PROX MPLS Tagging +****************************************************** + ++-----------------------------------------------------------------------------+ +|NSB PROX test for NFVI characterization | +| | ++--------------+--------------------------------------------------------------+ +|test case id | tc_prox_{context}_mpls_tagging-{port_num} | +| | | +| | * context = baremetal or heat_context; | +| | * port_num = 2 or 4; | +| | | ++--------------+--------------------------------------------------------------+ +|metric | * Network Throughput; | +| | * TG Packets Out; | +| | * TG Packets In; | +| | * VNF Packets Out; | +| | * VNF Packets In; | +| | * Dropped packets; | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The PROX MPLS Tagging test will take packets in from one | +| | port add an MPLS tag and forward them to another port. | +| | While forwarding packets in other direction MPLS tags will | +| | be removed. | +| | | +| | The MPLS test cases are implemented to run in baremetal | +| | and heat context an require 4 port topology to run the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | The MPLS Tagging test cases are listed below: | +| | | +| | * tc_prox_baremetal_mpls_tagging-2.yaml | +| | * tc_prox_baremetal_mpls_tagging-4.yaml | +| | * tc_prox_heat_context_mpls_tagging-2.yaml | +| | * tc_prox_heat_context_mpls_tagging-4.yaml | +| | | +| | Test duration is set as 300sec for each test. | +| | The minimum packet size for MPLS test is 68 bytes. This is | +| | set in the traffic profile and can be configured to use | +| | higher packet sizes. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | PROX | +| | PROX is a DPDK application that can simulate VNF workloads | +| | and can generate traffic and used for NFVI characterization | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | The PROX MPLS Tagging test cases can be configured with | +| | different: | +| | | +| | * packet sizes; | +| | * test durations; | +| | * tolerated loss; | +| | | +| | Default values exist. | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | For Openstack test case image (yardstick-samplevnfs) needs | +|conditions | to be installed into Glance with Prox and Dpdk included in | +| | it. | +| | | +| | For Baremetal tests cases Prox and Dpdk must be installed in | +| | the hosts where the test is executed. The pod.yaml file must | +| | have the necessary system and NIC information | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | For Baremetal test: The TG and VNF are started on the hosts | +| | based on the pod file. | +| | | +| | For Heat test: Two host VMs are booted, as Traffic generator | +| | and VNF(MPLS workload) based on the test flavor. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the TG and VNF by using ssh. | +| | The test will resolve the topology and instantiate the VNF | +| | and TG and collect the KPI's/metrics. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The TG will send packets to the VNF. If the number of | +| | dropped packets is more than the tolerated loss the line | +| | rate or throughput is halved. This is done until the dropped | +| | packets are within an acceptable tolerated loss. | +| | | +| | The KPI is the number of packets per second for 68 bytes | +| | packet size with an accepted minimal packet loss for the | +| | default configuration. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | In Baremetal test: The test quits the application and unbind | +| | the dpdk ports. | +| | | +| | In Heat test: Two host VMs are deleted on test completion. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | The test case will achieve a Throughput with an accepted | +| | minimal tolerated packet loss. | ++--------------+--------------------------------------------------------------+ + diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc002.rst b/docs/testing/user/userguide/opnfv_yardstick_tc002.rst index c98780fd5..bf2466fb2 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc002.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc002.rst @@ -106,8 +106,8 @@ Yardstick Test Case Description TC002 | | | +--------------+--------------------------------------------------------------+ |step 2 | Yardstick is connected with the server VM by using ssh. | -| | 'ping_benchmark' bash script is copyied from Jump Host to | -| | the server VM via the ssh tunnel. | +| | 'ping_benchmark' bash script is copied from Jump Host to the | +| | server VM via the ssh tunnel. | | | | +--------------+--------------------------------------------------------------+ |step 3 | Ping is invoked. Ping packets are sent from server VM to | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc044.rst b/docs/testing/user/userguide/opnfv_yardstick_tc044.rst index 2be8517a1..8db45e1d4 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc044.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc044.rst @@ -7,7 +7,7 @@ Yardstick Test Case Description TC044 ************************************* -.. _man-pages: http://manpages.ubuntu.com/manpages/trusty/en/man1/free.1.html +.. _man-pages: http://manpages.ubuntu.com/manpages/xenial/en/man1/free.1.html +-----------------------------------------------------------------------------+ |Memory Utilization | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc078.rst b/docs/testing/user/userguide/opnfv_yardstick_tc078.rst index 560d55e07..b5a6545ba 100644 --- a/docs/testing/user/userguide/opnfv_yardstick_tc078.rst +++ b/docs/testing/user/userguide/opnfv_yardstick_tc078.rst @@ -114,7 +114,8 @@ Yardstick Test Case Description TC078 |step 3 | Yardstick is connected with the target server by using ssh. | | | If custom runspec config file is used, this file is copyied | | | from yardstick to the target server via the ssh tunnel. | ---------------+---------------------------------------------------------------+ +| | | ++--------------+--------------------------------------------------------------+ |step 4 | SPEC CPU2006 benchmark is invoked and SPEC CPU 2006 metrics | | | are generated. | | | | diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc080.rst b/docs/testing/user/userguide/opnfv_yardstick_tc080.rst new file mode 100644 index 000000000..05eca502e --- /dev/null +++ b/docs/testing/user/userguide/opnfv_yardstick_tc080.rst @@ -0,0 +1,117 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +************************************* +Yardstick Test Case Description TC080 +************************************* + +.. _Ping: https://linux.die.net/man/8/ping + ++-----------------------------------------------------------------------------+ +|Network Latency | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC080_NETWORK_LATENCY_BETWEEN_CONTAINER | +| | | ++--------------+--------------------------------------------------------------+ +|metric | RTT (Round Trip Time) | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The purpose of TC080 is to do a basic verification that | +| | network latency is within acceptable boundaries when packets | +| | travel between containers located in two different | +| | Kubernetes pods. | +| | | +| | The purpose is also to be able to spot the trends. | +| | Test results, graphs and similar shall be stored for | +| | comparison reasons and product evolution understanding | +| | between different OPNFV versions and/or configurations. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | ping | +| | | +| | Ping is a computer network administration software utility | +| | used to test the reachability of a host on an Internet | +| | Protocol (IP) network. It measures the round-trip time for | +| | packet sent from the originating host to a destination | +| | computer that are echoed back to the source. | +| | | +| | Ping is normally part of any Linux distribution, hence it | +| | doesn't need to be installed. It is also part of the | +| | Yardstick Docker image. | +| | | ++--------------+--------------------------------------------------------------+ +|test topology | Ping packets (ICMP protocol's mandatory ECHO_REQUEST | +| | datagram) are sent from host container to target container | +| | to elicit ICMP ECHO_RESPONSE. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | file: opnfv_yardstick_tc080.yaml | +| | | +| | Packet size 200 bytes. Test duration 60 seconds. | +| | SLA RTT is set to maximum 10 ms. | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | This test case can be configured with different: | +| | | +| | * packet sizes; | +| | * burst sizes; | +| | * ping intervals; | +| | * test durations; | +| | * test iterations. | +| | | +| | Default values exist. | +| | | +| | SLA is optional. The SLA in this test case serves as an | +| | example. Considerably lower RTT is expected, and also normal | +| | to achieve in balanced L2 environments. However, to cover | +| | most configurations, both bare metal and fully virtualized | +| | ones, this value should be possible to achieve and | +| | acceptable for black box testing. Many real time | +| | applications start to suffer badly if the RTT time is higher | +| | than this. Some may suffer bad also close to this RTT, while | +| | others may not suffer at all. It is a compromise that may | +| | have to be tuned for different configuration purposes. | +| | | ++--------------+--------------------------------------------------------------+ +|usability | This test case should be run in Kunernetes environment. | +| | | ++--------------+--------------------------------------------------------------+ +|references | Ping_ | +| | | +| | ETSI-NFV-TST001 | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | The test case Docker image (openretriever/yardstick) needs | +|conditions | to be pulled into Kubernetes environment. | +| | | +| | No further requirements have been identified. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | Two containers are booted, as server and client. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the server container by using | +| | ssh. 'ping_benchmark' bash script is copied from Jump Host | +| | to the server container via the ssh tunnel. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | Ping is invoked. Ping packets are sent from server container | +| | to client container. RTT results are calculated and checked | +| | against the SLA. Logs are produced and stored. | +| | | +| | Result: Logs are stored. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | Two containers are deleted. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Test should not PASS if any RTT is above the optional SLA | +| | value, or if there is a test case execution problem. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc081.rst b/docs/testing/user/userguide/opnfv_yardstick_tc081.rst new file mode 100644 index 000000000..90af8a382 --- /dev/null +++ b/docs/testing/user/userguide/opnfv_yardstick_tc081.rst @@ -0,0 +1,122 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +************************************* +Yardstick Test Case Description TC080 +************************************* + +.. _cirros-image: https://download.cirros-cloud.net +.. _Ping: https://linux.die.net/man/8/ping + ++-----------------------------------------------------------------------------+ +|Network Latency | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC081_NETWORK_LATENCY_BETWEEN_CONTAINER_AND_ | +| | VM | +| | | ++--------------+--------------------------------------------------------------+ +|metric | RTT (Round Trip Time) | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | The purpose of TC080 is to do a basic verification that | +| | network latency is within acceptable boundaries when packets | +| | travel between a containers and a VM. | +| | | +| | The purpose is also to be able to spot the trends. | +| | Test results, graphs and similar shall be stored for | +| | comparison reasons and product evolution understanding | +| | between different OPNFV versions and/or configurations. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | ping | +| | | +| | Ping is a computer network administration software utility | +| | used to test the reachability of a host on an Internet | +| | Protocol (IP) network. It measures the round-trip time for | +| | packet sent from the originating host to a destination | +| | computer that are echoed back to the source. | +| | | +| | Ping is normally part of any Linux distribution, hence it | +| | doesn't need to be installed. It is also part of the | +| | Yardstick Docker image. (For example also a Cirros image can | +| | be downloaded from cirros-image_, it includes ping) | +| | | ++--------------+--------------------------------------------------------------+ +|test topology | Ping packets (ICMP protocol's mandatory ECHO_REQUEST | +| | datagram) are sent from host container to target vm to | +| | elicit ICMP ECHO_RESPONSE. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | file: opnfv_yardstick_tc081.yaml | +| | | +| | Packet size 200 bytes. Test duration 60 seconds. | +| | SLA RTT is set to maximum 10 ms. | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | This test case can be configured with different: | +| | | +| | * packet sizes; | +| | * burst sizes; | +| | * ping intervals; | +| | * test durations; | +| | * test iterations. | +| | | +| | Default values exist. | +| | | +| | SLA is optional. The SLA in this test case serves as an | +| | example. Considerably lower RTT is expected, and also normal | +| | to achieve in balanced L2 environments. However, to cover | +| | most configurations, both bare metal and fully virtualized | +| | ones, this value should be possible to achieve and | +| | acceptable for black box testing. Many real time | +| | applications start to suffer badly if the RTT time is higher | +| | than this. Some may suffer bad also close to this RTT, while | +| | others may not suffer at all. It is a compromise that may | +| | have to be tuned for different configuration purposes. | +| | | ++--------------+--------------------------------------------------------------+ +|usability | This test case should be run in Kunernetes environment. | +| | | ++--------------+--------------------------------------------------------------+ +|references | Ping_ | +| | | +| | ETSI-NFV-TST001 | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | The test case Docker image (openretriever/yardstick) needs | +|conditions | to be pulled into Kubernetes environment. | +| | The VM image (cirros-image) needs to be installed into | +| | Glance with ping included in it. | +| | | +| | No further requirements have been identified. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | A containers is booted, as server and a VM is booted as | +| | client. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Yardstick is connected with the server container by using | +| | ssh. 'ping_benchmark' bash script is copied from Jump Host | +| | to the server container via the ssh tunnel. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | Ping is invoked. Ping packets are sent from server container | +| | to client VM. RTT results are calculated and checked against | +| | the SLA. Logs are produced and stored. | +| | | +| | Result: Logs are stored. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | The container and VM are deleted. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Test should not PASS if any RTT is above the optional SLA | +| | value, or if there is a test case execution problem. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc083.rst b/docs/testing/user/userguide/opnfv_yardstick_tc083.rst new file mode 100644 index 000000000..7f80e2d98 --- /dev/null +++ b/docs/testing/user/userguide/opnfv_yardstick_tc083.rst @@ -0,0 +1,81 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +************************************* +Yardstick Test Case Description TC083 +************************************* + +.. _netperf: http://www.netperf.org/netperf/training/Netperf.html + ++-----------------------------------------------------------------------------+ +|Throughput per VM test | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC083_Network latency and throughput between | +| | VMs | +| | | ++--------------+--------------------------------------------------------------+ +|metric | Network latency and throughput | +| | | ++--------------+--------------------------------------------------------------+ +|test purpose | To evaluate the IaaS network performance with regards to | +| | flows and throughput, such as if and how different amounts | +| | of packet sizes and flows matter for the throughput between | +| | 2 VMs in one pod. | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | file: opnfv_yardstick_tc083.yaml | +| | | +| | Packet size: default 1024 bytes. | +| | | +| | Test length: default 20 seconds. | +| | | +| | The client and server are distributed on different nodes. | +| | | +| | For SLA max_mean_latency is set to 100. | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | netperf_ | +| | Netperf is a software application that provides network | +| | bandwidth testing between two hosts on a network. It | +| | supports Unix domain sockets, TCP, SCTP, DLPI and UDP via | +| | BSD Sockets. Netperf provides a number of predefined tests | +| | e.g. to measure bulk (unidirectional) data transfer or | +| | request response performance. | +| | (netperf is not always part of a Linux distribution, hence | +| | it needs to be installed.) | +| | | ++--------------+--------------------------------------------------------------+ +|references | netperf Man pages | +| | ETSI-NFV-TST001 | +| | | ++--------------+--------------------------------------------------------------+ +|applicability | Test can be configured with different packet sizes and | +| | test duration. Default values exist. | +| | | +| | SLA (optional): max_mean_latency | +| | | ++--------------+--------------------------------------------------------------+ +|pre-test | The POD can be reached by external ip and logged on via ssh | +|conditions | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | Install netperf tool on each specified node, one is as the | +| | server, and the other as the client. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | Log on to the client node and use the netperf command to | +| | execute the network performance test | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | The throughput results stored. | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Fails only if SLA is not passed, or if there is a test case | +| | execution problem. | +| | | ++--------------+--------------------------------------------------------------+ |