summaryrefslogtreecommitdiffstats
path: root/docs/testing/user/userguide/13-nsb-installation.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/userguide/13-nsb-installation.rst')
-rw-r--r--docs/testing/user/userguide/13-nsb-installation.rst100
1 files changed, 85 insertions, 15 deletions
diff --git a/docs/testing/user/userguide/13-nsb-installation.rst b/docs/testing/user/userguide/13-nsb-installation.rst
index 3e0ed0bfb..fb68fbf21 100644
--- a/docs/testing/user/userguide/13-nsb-installation.rst
+++ b/docs/testing/user/userguide/13-nsb-installation.rst
@@ -118,7 +118,7 @@ Ansible:
.. code-block:: ini
- cat ./ansible/yardstick-install-inventory.ini
+ cat ./ansible/install-inventory.ini
[jumphost]
localhost ansible_connection=local
@@ -138,7 +138,7 @@ Ansible:
.. note::
SSH access without password needs to be configured for all your nodes defined in
- ``yardstick-install-inventory.ini`` file.
+ ``install-inventory.ini`` file.
If you want to use password authentication you need to install sshpass
.. code-block:: console
@@ -352,18 +352,53 @@ SR-IOV
SR-IOV Pre-requisites
^^^^^^^^^^^^^^^^^^^^^
-On Host:
- a) Create a bridge for VM to connect to external network
+On Host, where VM is created:
+ a) Create and configure a bridge named ``br-int`` for VM to connect to external network.
+ Currently this can be done using VXLAN tunnel.
+
+ Execute the following on host, where VM is created:
.. code-block:: console
+ ip link add type vxlan remote <Jumphost IP> local <DUT IP> id <ID: 10> dstport 4789
brctl addbr br-int
- brctl addif br-int <interface_name> #This interface is connected to internet
+ brctl addif br-int vxlan0
+ ip link set dev vxlan0 up
+ ip addr add <IP#1, like: 172.20.2.1/24> dev br-int
+ ip link set dev br-int up
+
+ .. note:: May be needed to add extra rules to iptable to forward traffic.
+
+ .. code-block:: console
+
+ iptables -A FORWARD -i br-int -s <network ip address>/<netmask> -j ACCEPT
+ iptables -A FORWARD -o br-int -d <network ip address>/<netmask> -j ACCEPT
+
+ Execute the following on a jump host:
+
+ .. code-block:: console
+
+ ip link add type vxlan remote <DUT IP> local <Jumphost IP> id <ID: 10> dstport 4789
+ ip addr add <IP#2, like: 172.20.2.2/24> dev vxlan0
+ ip link set dev vxlan0 up
+
+ .. note:: Host and jump host are different baremetal servers.
+
+ b) Modify test case management CIDR.
+ IP addresses IP#1, IP#2 and CIDR must be in the same network.
+
+ .. code-block:: YAML
+
+ servers:
+ vnf:
+ network_ports:
+ mgmt:
+ cidr: '1.1.1.7/24'
- b) Build guest image for VNF to run.
+ c) Build guest image for VNF to run.
Most of the sample test cases in Yardstick are using a guest image called
- ``yardstick-image`` which deviates from an Ubuntu Cloud Server image
- Yardstick has a tool for building this custom image with samplevnf.
+ ``yardstick-nsb-image`` which deviates from an Ubuntu Cloud Server image
+ Yardstick has a tool for building this custom image with SampleVNF.
It is necessary to have ``sudo`` rights to use this tool.
Also you may need to install several additional packages to use this tool, by
@@ -548,18 +583,53 @@ OVS-DPDK
OVS-DPDK Pre-requisites
^^^^^^^^^^^^^^^^^^^^^^^
-On Host:
- a) Create a bridge for VM to connect to external network
+On Host, where VM is created:
+ a) Create and configure a bridge named ``br-int`` for VM to connect to external network.
+ Currently this can be done using VXLAN tunnel.
+
+ Execute the following on host, where VM is created:
.. code-block:: console
+ ip link add type vxlan remote <Jumphost IP> local <DUT IP> id <ID: 10> dstport 4789
brctl addbr br-int
- brctl addif br-int <interface_name> #This interface is connected to internet
+ brctl addif br-int vxlan0
+ ip link set dev vxlan0 up
+ ip addr add <IP#1, like: 172.20.2.1/24> dev br-int
+ ip link set dev br-int up
+
+ .. note:: May be needed to add extra rules to iptable to forward traffic.
+
+ .. code-block:: console
+
+ iptables -A FORWARD -i br-int -s <network ip address>/<netmask> -j ACCEPT
+ iptables -A FORWARD -o br-int -d <network ip address>/<netmask> -j ACCEPT
+
+ Execute the following on a jump host:
+
+ .. code-block:: console
+
+ ip link add type vxlan remote <DUT IP> local <Jumphost IP> id <ID: 10> dstport 4789
+ ip addr add <IP#2, like: 172.20.2.2/24> dev vxlan0
+ ip link set dev vxlan0 up
+
+ .. note:: Host and jump host are different baremetal servers.
+
+ b) Modify test case management CIDR.
+ IP addresses IP#1, IP#2 and CIDR must be in the same network.
+
+ .. code-block:: YAML
+
+ servers:
+ vnf:
+ network_ports:
+ mgmt:
+ cidr: '1.1.1.7/24'
- b) Build guest image for VNF to run.
+ c) Build guest image for VNF to run.
Most of the sample test cases in Yardstick are using a guest image called
- ``yardstick-image`` which deviates from an Ubuntu Cloud Server image
- Yardstick has a tool for building this custom image with samplevnf.
+ ``yardstick-nsb-image`` which deviates from an Ubuntu Cloud Server image
+ Yardstick has a tool for building this custom image with SampleVNF.
It is necessary to have ``sudo`` rights to use this tool.
Also you may need to install several additional packages to use this tool, by
@@ -880,7 +950,7 @@ Install dependencies needed for the DevStack
Setup SR-IOV ports on the host:
-.. note:: The ``enp24s0f0``, ``enp24s0f0`` are physical function (PF) interfaces
+.. note:: The ``enp24s0f0``, ``enp24s0f1`` are physical function (PF) interfaces
on a host and ``enp24s0f3`` is a public interface used in OpenStack, so the
interface names should be changed according to the HW environment used for
testing.