summaryrefslogtreecommitdiffstats
path: root/docs/testing/user/userguide/12-nsb_installation.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/testing/user/userguide/12-nsb_installation.rst')
-rw-r--r--docs/testing/user/userguide/12-nsb_installation.rst849
1 files changed, 849 insertions, 0 deletions
diff --git a/docs/testing/user/userguide/12-nsb_installation.rst b/docs/testing/user/userguide/12-nsb_installation.rst
new file mode 100644
index 000000000..8cc26acd5
--- /dev/null
+++ b/docs/testing/user/userguide/12-nsb_installation.rst
@@ -0,0 +1,849 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) OPNFV, 2016-2017 Intel Corporation.
+
+Yardstick - NSB Testing -Installation
+=====================================
+
+Abstract
+--------
+
+The Network Service Benchmarking (NSB) extends the yardstick framework to do
+VNF characterization and benchmarking in three different execution
+environments viz., bare metal i.e. native Linux environment, standalone virtual
+environment and managed virtualized environment (e.g. Open stack etc.).
+It also brings in the capability to interact with external traffic generators
+both hardware & software based for triggering and validating the traffic
+according to user defined profiles.
+
+The steps needed to run Yardstick with NSB testing are:
+
+* Install Yardstick (NSB Testing).
+* Setup/Reference pod.yaml describing Test topology
+* Create/Reference the test configuration yaml file.
+* Run the test case.
+
+
+Prerequisites
+-------------
+
+Refer chapter Yardstick Installation for more information on yardstick
+prerequisites
+
+Several prerequisites are needed for Yardstick(VNF testing):
+
+ - Python Modules: pyzmq, pika.
+
+ - flex
+
+ - bison
+
+ - build-essential
+
+ - automake
+
+ - libtool
+
+ - librabbitmq-dev
+
+ - rabbitmq-server
+
+ - collectd
+
+ - intel-cmt-cat
+
+Hardware & Software Ingredients
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+SUT requirements:
+
+
+ +-----------+--------------------+
+ | Item | Description |
+ +-----------+--------------------+
+ | Memory | Min 20GB |
+ +-----------+--------------------+
+ | NICs | 2 x 10G |
+ +-----------+--------------------+
+ | OS | Ubuntu 16.04.3 LTS |
+ +-----------+--------------------+
+ | kernel | 4.4.0-34-generic |
+ +-----------+--------------------+
+ | DPDK | 17.02 |
+ +-----------+--------------------+
+
+Boot and BIOS settings:
+
+
+ +------------------+---------------------------------------------------+
+ | Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 |
+ | | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 |
+ | | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 |
+ | | iommu=on iommu=pt intel_iommu=on |
+ | | Note: nohz_full and rcu_nocbs is to disable Linux |
+ | | kernel interrupts |
+ +------------------+---------------------------------------------------+
+ |BIOS | CPU Power and Performance Policy <Performance> |
+ | | CPU C-state Disabled |
+ | | CPU P-state Disabled |
+ | | Enhanced Intel® Speedstep® Tech Disabled |
+ | | Hyper-Threading Technology (If supported) Enabled |
+ | | Virtualization Techology Enabled |
+ | | Intel(R) VT for Direct I/O Enabled |
+ | | Coherency Enabled |
+ | | Turbo Boost Disabled |
+ +------------------+---------------------------------------------------+
+
+
+
+Install Yardstick (NSB Testing)
+-------------------------------
+
+Download the source code and install Yardstick from it
+
+.. code-block:: console
+
+ git clone https://gerrit.opnfv.org/gerrit/yardstick
+
+ cd yardstick
+
+ # Switch to latest stable branch
+ # git checkout <tag or stable branch>
+ git checkout stable/euphrates
+
+ # For Bare-Metal or Standalone Virtualization
+ ./nsb_setup.sh
+
+ # For OpenStack
+ ./nsb_setup.sh <path to admin-openrc.sh>
+
+
+Above command setup docker with latest yardstick code. To execute
+
+.. code-block:: console
+
+ docker exec -it yardstick bash
+
+It will also automatically download all the packages needed for NSB Testing setup.
+Refer chapter :doc:`04-installation` for more on docker **Install Yardstick using Docker (recommended)**
+
+System Topology:
+----------------
+
+.. code-block:: console
+
+ +----------+ +----------+
+ | | | |
+ | | (0)----->(0) | |
+ | TG1 | | DUT |
+ | | | |
+ | | (1)<-----(1) | |
+ +----------+ +----------+
+ trafficgen_1 vnf
+
+
+Environment parameters and credentials
+--------------------------------------
+
+Config yardstick conf
+^^^^^^^^^^^^^^^^^^^^^
+
+If user did not run 'yardstick env influxdb' inside the container, which will generate
+correct yardstick.conf, then create the config file manually (run inside the container):
+
+ cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf
+ vi /etc/yardstick/yardstick.conf
+
+Add trex_path, trex_client_lib and bin_path in 'nsb' section.
+
+::
+
+ [DEFAULT]
+ debug = True
+ dispatcher = file, influxdb
+
+ [dispatcher_influxdb]
+ timeout = 5
+ target = http://{YOUR_IP_HERE}:8086
+ db_name = yardstick
+ username = root
+ password = root
+
+ [nsb]
+ trex_path=/opt/nsb_bin/trex/scripts
+ bin_path=/opt/nsb_bin
+ trex_client_lib=/opt/nsb_bin/trex_client/stl
+
+Run Yardstick - Network Service Testcases
+-----------------------------------------
+
+
+NS testing - using yardstick CLI
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ See :doc:`04-installation`
+
+.. code-block:: console
+
+
+ docker exec -it yardstick /bin/bash
+ source /etc/yardstick/openstack.creds (only for heat TC if nsb_setup.sh was NOT used)
+ export EXTERNAL_NETWORK="<openstack public network>" (only for heat TC)
+ yardstick --debug task start yardstick/samples/vnf_samples/nsut/<vnf>/<test case>
+
+Network Service Benchmarking - Bare-Metal
+-----------------------------------------
+
+Bare-Metal Config pod.yaml describing Topology
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Bare-Metal 2-Node setup:
+########################
+.. code-block:: console
+
+ +----------+ +----------+
+ | | | |
+ | | (0)----->(0) | |
+ | TG1 | | DUT |
+ | | | |
+ | | (n)<-----(n) | |
+ +----------+ +----------+
+ trafficgen_1 vnf
+
+Bare-Metal 3-Node setup - Correlated Traffic:
+#############################################
+.. code-block:: console
+
+ +----------+ +----------+ +------------+
+ | | | | | |
+ | | | | | |
+ | | (0)----->(0) | | | UDP |
+ | TG1 | | DUT | | Replay |
+ | | | | | |
+ | | | |(1)<---->(0)| |
+ +----------+ +----------+ +------------+
+ trafficgen_1 vnf trafficgen_2
+
+
+Bare-Metal Config pod.yaml
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+Before executing Yardstick test cases, make sure that pod.yaml reflects the
+topology and update all the required fields.::
+
+ cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml
+
+.. code-block:: YAML
+
+ nodes:
+ -
+ name: trafficgen_1
+ role: TrafficGen
+ ip: 1.1.1.1
+ user: root
+ password: r00t
+ interfaces:
+ xe0: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.0"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 0
+ local_ip: "152.16.100.20"
+ netmask: "255.255.255.0"
+ local_mac: "00:00:00:00:00:01"
+ xe1: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.1"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 1
+ local_ip: "152.16.40.20"
+ netmask: "255.255.255.0"
+ local_mac: "00:00.00:00:00:02"
+
+ -
+ name: vnf
+ role: vnf
+ ip: 1.1.1.2
+ user: root
+ password: r00t
+ host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node
+ interfaces:
+ xe0: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.0"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 0
+ local_ip: "152.16.100.19"
+ netmask: "255.255.255.0"
+ local_mac: "00:00:00:00:00:03"
+
+ xe1: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.1"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 1
+ local_ip: "152.16.40.19"
+ netmask: "255.255.255.0"
+ local_mac: "00:00:00:00:00:04"
+ routing_table:
+ - network: "152.16.100.20"
+ netmask: "255.255.255.0"
+ gateway: "152.16.100.20"
+ if: "xe0"
+ - network: "152.16.40.20"
+ netmask: "255.255.255.0"
+ gateway: "152.16.40.20"
+ if: "xe1"
+ nd_route_tbl:
+ - network: "0064:ff9b:0:0:0:0:9810:6414"
+ netmask: "112"
+ gateway: "0064:ff9b:0:0:0:0:9810:6414"
+ if: "xe0"
+ - network: "0064:ff9b:0:0:0:0:9810:2814"
+ netmask: "112"
+ gateway: "0064:ff9b:0:0:0:0:9810:2814"
+ if: "xe1"
+
+
+Network Service Benchmarking - Standalone Virtualization
+--------------------------------------------------------
+
+SR-IOV:
+^^^^^^^
+
+SR-IOV Pre-requisites
+#####################
+
+On Host:
+ a) Create a bridge for VM to connect to external network
+
+ .. code-block:: console
+
+ brctl addbr br-int
+ brctl addif br-int <interface_name> #This interface is connected to internet
+
+ b) Build guest image for VNF to run.
+ Most of the sample test cases in Yardstick are using a guest image called
+ ``yardstick-image`` which deviates from an Ubuntu Cloud Server image
+ Yardstick has a tool for building this custom image with samplevnf.
+ It is necessary to have ``sudo`` rights to use this tool.
+
+ Also you may need to install several additional packages to use this tool, by
+ following the commands below::
+
+ sudo apt-get update && sudo apt-get install -y qemu-utils kpartx
+
+ This image can be built using the following command in the directory where Yardstick is installed
+
+ .. code-block:: console
+
+ export YARD_IMG_ARCH='amd64'
+ sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers
+
+ Please use ansible script to generate a cloud image refer to :doc:`04-installation`
+
+ for more details refer to chapter :doc:`04-installation`
+
+ .. note:: VM should be build with static IP and should be accessible from yardstick host.
+
+
+SR-IOV Config pod.yaml describing Topology
+##########################################
+
+SR-IOV 2-Node setup:
+####################
+.. code-block:: console
+
+ +--------------------+
+ | |
+ | |
+ | DUT |
+ | (VNF) |
+ | |
+ +--------------------+
+ | VF NIC | | VF NIC |
+ +--------+ +--------+
+ ^ ^
+ | |
+ | |
+ +----------+ +-------------------------+
+ | | | ^ ^ |
+ | | | | | |
+ | | (0)<----->(0) | ------ | |
+ | TG1 | | SUT | |
+ | | | | |
+ | | (n)<----->(n) |------------------ |
+ +----------+ +-------------------------+
+ trafficgen_1 host
+
+
+
+SR-IOV 3-Node setup - Correlated Traffic
+########################################
+.. code-block:: console
+
+ +--------------------+
+ | |
+ | |
+ | DUT |
+ | (VNF) |
+ | |
+ +--------------------+
+ | VF NIC | | VF NIC |
+ +--------+ +--------+
+ ^ ^
+ | |
+ | |
+ +----------+ +-------------------------+ +--------------+
+ | | | ^ ^ | | |
+ | | | | | | | |
+ | | (0)<----->(0) | ------ | | | TG2 |
+ | TG1 | | SUT | | | (UDP Replay) |
+ | | | | | | |
+ | | (n)<----->(n) | ------ | (n)<-->(n) | |
+ +----------+ +-------------------------+ +--------------+
+ trafficgen_1 host trafficgen_2
+
+Before executing Yardstick test cases, make sure that pod.yaml reflects the
+topology and update all the required fields.
+
+.. code-block:: console
+
+ cp <yardstick>/etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml
+ cp <yardstick>/etc/yardstick/nodes/standalone/host_sriov.yaml /etc/yardstick/nodes/standalone/host_sriov.yaml
+
+.. note:: Update all the required fields like ip, user, password, pcis, etc...
+
+SR-IOV Config pod_trex.yaml
+###########################
+
+.. code-block:: YAML
+
+ nodes:
+ -
+ name: trafficgen_1
+ role: TrafficGen
+ ip: 1.1.1.1
+ user: root
+ password: r00t
+ key_filename: /root/.ssh/id_rsa
+ interfaces:
+ xe0: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.0"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 0
+ local_ip: "152.16.100.20"
+ netmask: "255.255.255.0"
+ local_mac: "00:00:00:00:00:01"
+ xe1: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.1"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 1
+ local_ip: "152.16.40.20"
+ netmask: "255.255.255.0"
+ local_mac: "00:00.00:00:00:02"
+
+SR-IOV Config host_sriov.yaml
+#############################
+
+.. code-block:: YAML
+
+ nodes:
+ -
+ name: sriov
+ role: Sriov
+ ip: 192.168.100.101
+ user: ""
+ password: ""
+
+SR-IOV testcase update: ``<yardstick>/samples/vnf_samples/nsut/vfw/tc_sriov_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``
+
+Update "contexts" section
+"""""""""""""""""""""""""
+
+.. code-block:: YAML
+
+ contexts:
+ - name: yardstick
+ type: Node
+ file: /etc/yardstick/nodes/standalone/pod_trex.yaml
+ - type: StandaloneSriov
+ file: /etc/yardstick/nodes/standalone/host_sriov.yaml
+ name: yardstick
+ vm_deploy: True
+ flavor:
+ images: "/var/lib/libvirt/images/ubuntu.qcow2"
+ ram: 4096
+ extra_specs:
+ hw:cpu_sockets: 1
+ hw:cpu_cores: 6
+ hw:cpu_threads: 2
+ user: "" # update VM username
+ password: "" # update password
+ servers:
+ vnf:
+ network_ports:
+ mgmt:
+ cidr: '1.1.1.61/24' # Update VM IP address, if static, <ip>/<mask> or if dynamic, <start of ip>/<mask>
+ xe0:
+ - uplink_0
+ xe1:
+ - downlink_0
+ networks:
+ uplink_0:
+ phy_port: "0000:05:00.0"
+ vpci: "0000:00:07.0"
+ cidr: '152.16.100.10/24'
+ gateway_ip: '152.16.100.20'
+ downlink_0:
+ phy_port: "0000:05:00.1"
+ vpci: "0000:00:08.0"
+ cidr: '152.16.40.10/24'
+ gateway_ip: '152.16.100.20'
+
+
+
+OVS-DPDK:
+^^^^^^^^^
+
+OVS-DPDK Pre-requisites
+#######################
+
+On Host:
+ a) Create a bridge for VM to connect to external network
+
+ .. code-block:: console
+
+ brctl addbr br-int
+ brctl addif br-int <interface_name> #This interface is connected to internet
+
+ b) Build guest image for VNF to run.
+ Most of the sample test cases in Yardstick are using a guest image called
+ ``yardstick-image`` which deviates from an Ubuntu Cloud Server image
+ Yardstick has a tool for building this custom image with samplevnf.
+ It is necessary to have ``sudo`` rights to use this tool.
+
+ Also you may need to install several additional packages to use this tool, by
+ following the commands below::
+
+ sudo apt-get update && sudo apt-get install -y qemu-utils kpartx
+
+ This image can be built using the following command in the directory where Yardstick is installed::
+
+ export YARD_IMG_ARCH='amd64'
+ sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers
+ sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
+
+ for more details refer to chapter :doc:`04-installation`
+
+ .. note:: VM should be build with static IP and should be accessible from yardstick host.
+
+ c) OVS & DPDK version.
+ - OVS 2.7 and DPDK 16.11.1 above version is supported
+
+ d) Setup OVS/DPDK on host.
+ Please refer to below link on how to setup `OVS-DPDK <http://docs.openvswitch.org/en/latest/intro/install/dpdk/>`_
+
+
+OVS-DPDK Config pod.yaml describing Topology
+############################################
+
+OVS-DPDK 2-Node setup:
+######################
+
+
+.. code-block:: console
+
+ +--------------------+
+ | |
+ | |
+ | DUT |
+ | (VNF) |
+ | |
+ +--------------------+
+ | virtio | | virtio |
+ +--------+ +--------+
+ ^ ^
+ | |
+ | |
+ +--------+ +--------+
+ | vHOST0 | | vHOST1 |
+ +----------+ +-------------------------+
+ | | | ^ ^ |
+ | | | | | |
+ | | (0)<----->(0) | ------ | |
+ | TG1 | | SUT | |
+ | | | (ovs-dpdk) | |
+ | | (n)<----->(n) |------------------ |
+ +----------+ +-------------------------+
+ trafficgen_1 host
+
+
+OVS-DPDK 3-Node setup - Correlated Traffic
+##########################################
+
+.. code-block:: console
+
+ +--------------------+
+ | |
+ | |
+ | DUT |
+ | (VNF) |
+ | |
+ +--------------------+
+ | virtio | | virtio |
+ +--------+ +--------+
+ ^ ^
+ | |
+ | |
+ +--------+ +--------+
+ | vHOST0 | | vHOST1 |
+ +----------+ +-------------------------+ +------------+
+ | | | ^ ^ | | |
+ | | | | | | | |
+ | | (0)<----->(0) | ------ | | | TG2 |
+ | TG1 | | SUT | | |(UDP Replay)|
+ | | | (ovs-dpdk) | | | |
+ | | (n)<----->(n) | ------ |(n)<-->(n)| |
+ +----------+ +-------------------------+ +------------+
+ trafficgen_1 host trafficgen_2
+
+
+Before executing Yardstick test cases, make sure that pod.yaml reflects the
+topology and update all the required fields.
+
+.. code-block:: console
+
+ cp <yardstick>/etc/yardstick/nodes/standalone/trex_bm.yaml.sample /etc/yardstick/nodes/standalone/pod_trex.yaml
+ cp <yardstick>/etc/yardstick/nodes/standalone/host_ovs.yaml /etc/yardstick/nodes/standalone/host_ovs.yaml
+
+.. note:: Update all the required fields like ip, user, password, pcis, etc...
+
+OVS-DPDK Config pod_trex.yaml
+#############################
+
+.. code-block:: YAML
+
+ nodes:
+ -
+ name: trafficgen_1
+ role: TrafficGen
+ ip: 1.1.1.1
+ user: root
+ password: r00t
+ interfaces:
+ xe0: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.0"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 0
+ local_ip: "152.16.100.20"
+ netmask: "255.255.255.0"
+ local_mac: "00:00:00:00:00:01"
+ xe1: # logical name from topology.yaml and vnfd.yaml
+ vpci: "0000:07:00.1"
+ driver: i40e # default kernel driver
+ dpdk_port_num: 1
+ local_ip: "152.16.40.20"
+ netmask: "255.255.255.0"
+ local_mac: "00:00.00:00:00:02"
+
+OVS-DPDK Config host_ovs.yaml
+#############################
+
+.. code-block:: YAML
+
+ nodes:
+ -
+ name: ovs_dpdk
+ role: OvsDpdk
+ ip: 192.168.100.101
+ user: ""
+ password: ""
+
+ovs_dpdk testcase update: ``<yardstick>/samples/vnf_samples/nsut/vfw/tc_ovs_rfc2544_ipv4_1rule_1flow_64B_trex.yaml``
+
+Update "contexts" section
+"""""""""""""""""""""""""
+
+.. code-block:: YAML
+
+ contexts:
+ - name: yardstick
+ type: Node
+ file: /etc/yardstick/nodes/standalone/pod_trex.yaml
+ - type: StandaloneOvsDpdk
+ name: yardstick
+ file: /etc/yardstick/nodes/standalone/pod_ovs.yaml
+ vm_deploy: True
+ ovs_properties:
+ version:
+ ovs: 2.7.0
+ dpdk: 16.11.1
+ pmd_threads: 2
+ ram:
+ socket_0: 2048
+ socket_1: 2048
+ queues: 4
+ vpath: "/usr/local"
+
+ flavor:
+ images: "/var/lib/libvirt/images/ubuntu.qcow2"
+ ram: 4096
+ extra_specs:
+ hw:cpu_sockets: 1
+ hw:cpu_cores: 6
+ hw:cpu_threads: 2
+ user: "" # update VM username
+ password: "" # update password
+ servers:
+ vnf:
+ network_ports:
+ mgmt:
+ cidr: '1.1.1.61/24' # Update VM IP address, if static, <ip>/<mask> or if dynamic, <start of ip>/<mask>
+ xe0:
+ - uplink_0
+ xe1:
+ - downlink_0
+ networks:
+ uplink_0:
+ phy_port: "0000:05:00.0"
+ vpci: "0000:00:07.0"
+ cidr: '152.16.100.10/24'
+ gateway_ip: '152.16.100.20'
+ downlink_0:
+ phy_port: "0000:05:00.1"
+ vpci: "0000:00:08.0"
+ cidr: '152.16.40.10/24'
+ gateway_ip: '152.16.100.20'
+
+
+Enabling other Traffic generator
+--------------------------------
+
+IxLoad:
+^^^^^^^
+
+1. Software needed: IxLoadAPI ``<IxLoadTclApi verson>Linux64.bin.tgz and <IxOS version>Linux64.bin.tar.gz`` (Download from ixia support site)
+ Install - ``<IxLoadTclApi verson>Linux64.bin.tgz & <IxOS version>Linux64.bin.tar.gz``
+ If the installation was not done inside the container, after installing the IXIA client,
+ check /opt/ixia/ixload/<ver>/bin/ixloadpython and make sure you can run this cmd
+ inside the yardstick container. Usually user is required to copy or link /opt/ixia/python/<ver>/bin/ixiapython
+ to /usr/bin/ixiapython<ver> inside the container.
+
+2. Update pod_ixia.yaml file with ixia details.
+
+ .. code-block:: console
+
+ cp <repo>/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia etc/yardstick/nodes/pod_ixia.yaml
+
+ Config pod_ixia.yaml
+
+ .. code-block:: yaml
+
+
+ nodes:
+ -
+ name: trafficgen_1
+ role: IxNet
+ ip: 1.2.1.1 #ixia machine ip
+ user: user
+ password: r00t
+ key_filename: /root/.ssh/id_rsa
+ tg_config:
+ ixchassis: "1.2.1.7" #ixia chassis ip
+ tcl_port: "8009" # tcl server port
+ lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0"
+ root_dir: "/opt/ixia/ixos-api/8.01.0.2/"
+ py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/"
+ py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi"
+ dut_result_dir: "/mnt/ixia"
+ version: 8.1
+ interfaces:
+ xe0: # logical name from topology.yaml and vnfd.yaml
+ vpci: "2:5" # Card:port
+ driver: "none"
+ dpdk_port_num: 0
+ local_ip: "152.16.100.20"
+ netmask: "255.255.0.0"
+ local_mac: "00:98:10:64:14:00"
+ xe1: # logical name from topology.yaml and vnfd.yaml
+ vpci: "2:6" # [(Card, port)]
+ driver: "none"
+ dpdk_port_num: 1
+ local_ip: "152.40.40.20"
+ netmask: "255.255.0.0"
+ local_mac: "00:98:28:28:14:00"
+
+ for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration
+
+3. Start IxOS TCL Server (Install 'Ixia IxExplorer IxOS <version>')
+ You will also need to configure the IxLoad machine to start the IXIA
+ IxosTclServer. This can be started like so:
+
+ - Connect to the IxLoad machine using RDP
+ - Go to:
+ ``Start->Programs->Ixia->IxOS->IxOS 8.01-GA-Patch1->Ixia Tcl Server IxOS 8.01-GA-Patch1``
+ or
+ ``"C:\Program Files (x86)\Ixia\IxOS\8.01-GA-Patch1\ixTclServer.exe"``
+
+4. Create a folder "Results" in c:\ and share the folder on the network.
+
+5. execute testcase in samplevnf folder.
+ eg ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_http_ixload_1b_Requests-65000_Concurrency.yaml``
+
+IxNetwork:
+^^^^^^^^^^
+
+1. Software needed: ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` (Download from ixia support site)
+ Install - ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz``
+2. Update pod_ixia.yaml file with ixia details.
+
+ .. code-block:: console
+
+ cp <repo>/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia etc/yardstick/nodes/pod_ixia.yaml
+
+ Config pod_ixia.yaml
+
+ .. code-block:: yaml
+
+ nodes:
+ -
+ name: trafficgen_1
+ role: IxNet
+ ip: 1.2.1.1 #ixia machine ip
+ user: user
+ password: r00t
+ key_filename: /root/.ssh/id_rsa
+ tg_config:
+ ixchassis: "1.2.1.7" #ixia chassis ip
+ tcl_port: "8009" # tcl server port
+ lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0"
+ root_dir: "/opt/ixia/ixos-api/8.01.0.2/"
+ py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/"
+ py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi"
+ dut_result_dir: "/mnt/ixia"
+ version: 8.1
+ interfaces:
+ xe0: # logical name from topology.yaml and vnfd.yaml
+ vpci: "2:5" # Card:port
+ driver: "none"
+ dpdk_port_num: 0
+ local_ip: "152.16.100.20"
+ netmask: "255.255.0.0"
+ local_mac: "00:98:10:64:14:00"
+ xe1: # logical name from topology.yaml and vnfd.yaml
+ vpci: "2:6" # [(Card, port)]
+ driver: "none"
+ dpdk_port_num: 1
+ local_ip: "152.40.40.20"
+ netmask: "255.255.0.0"
+ local_mac: "00:98:28:28:14:00"
+
+ for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration
+
+3. Start IxNetwork TCL Server
+ You will also need to configure the IxNetwork machine to start the IXIA
+ IxNetworkTclServer. This can be started like so:
+
+ - Connect to the IxNetwork machine using RDP
+ - Go to: ``Start->Programs->Ixia->IxNetwork->IxNetwork 7.21.893.14 GA->IxNetworkTclServer`` (or ``IxNetworkApiServer``)
+
+4. execute testcase in samplevnf folder.
+ eg ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_rfc2544_ipv4_1rule_1flow_64B_ixia.yaml``
+