diff options
Diffstat (limited to 'docs/testing/user/userguide/11-apexlake_installation.rst')
| -rw-r--r-- | docs/testing/user/userguide/11-apexlake_installation.rst | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/docs/testing/user/userguide/11-apexlake_installation.rst b/docs/testing/user/userguide/11-apexlake_installation.rst deleted file mode 100644 index 0d8ef143f..000000000 --- a/docs/testing/user/userguide/11-apexlake_installation.rst +++ /dev/null @@ -1,302 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - - -.. _DPDK: http://dpdk.org/doc/nics -.. _DPDK-pktgen: https://github.com/Pktgen/Pktgen-DPDK/ -.. _SRIOV: https://wiki.openstack.org/wiki/SR-IOV-Passthrough-For-Networking -.. _PORTSEC: https://wiki.openstack.org/wiki/Neutron/ML2PortSecurityExtensionDriver -.. _here: https://wiki.opnfv.org/vtc - - -============================ -Apexlake Installation Guide -============================ - -Abstract --------- - -ApexLake is a framework that provides automatic execution of experiments and -related data collection to enable a user validate infrastructure from the -perspective of a Virtual Network Function (:term:`VNF`). - -In the context of Yardstick, a virtual Traffic Classifier (:term:`VTC`) network -function is utilized. - - -Framework Hardware Dependencies -=============================== - -In order to run the framework there are some hardware related dependencies for -ApexLake. - -The framework needs to be installed on the same physical node where DPDK-pktgen_ -is installed. - -The installation requires the physical node hosting the packet generator must -have 2 NICs which are DPDK_ compatible. - -The 2 NICs will be connected to the switch where the OpenStack VM -network is managed. - -The switch used must support multicast traffic and :term:`IGMP` snooping. -Further details about the configuration are provided at the following here_. - -The corresponding ports to which the cables are connected need to be configured -as VLAN trunks using two of the VLAN IDs available for Neutron. -Note the VLAN IDs used as they will be required in later configuration steps. - - -Framework Software Dependencies -=============================== -Before starting the framework, a number of dependencies must first be installed. -The following describes the set of instructions to be executed via the Linux -shell in order to install and configure the required dependencies. - -1. Install Dependencies. - -To support the framework dependencies the following packages must be installed. -The example provided is based on Ubuntu and needs to be executed in root mode. - -:: - - apt-get install python-dev - apt-get install python-pip - apt-get install python-mock - apt-get install tcpreplay - apt-get install libpcap-dev - -2. Source OpenStack openrc file. - -:: - - source openrc - -3. Configure Openstack Neutron - -In order to support traffic generation and management by the virtual -Traffic Classifier, the configuration of the port security driver -extension is required for Neutron. - -For further details please follow the following link: PORTSEC_ -This step can be skipped in case the target OpenStack is Juno or Kilo release, -but it is required to support Liberty. -It is therefore required to indicate the release version in the configuration -file located in ./yardstick/vTC/apexlake/apexlake.conf - - -4. Create Two Networks based on VLANs in Neutron. - -To enable network communications between the packet generator and the compute -node, two networks must be created via Neutron and mapped to the VLAN IDs -that were previously used in the configuration of the physical switch. -The following shows the typical set of commands required to configure Neutron -correctly. -The physical switches need to be configured accordingly. - -:: - - VLAN_1=2032 - VLAN_2=2033 - PHYSNET=physnet2 - neutron net-create apexlake_inbound_network \ - --provider:network_type vlan \ - --provider:segmentation_id $VLAN_1 \ - --provider:physical_network $PHYSNET - - neutron subnet-create apexlake_inbound_network \ - 192.168.0.0/24 --name apexlake_inbound_subnet - - neutron net-create apexlake_outbound_network \ - --provider:network_type vlan \ - --provider:segmentation_id $VLAN_2 \ - --provider:physical_network $PHYSNET - - neutron subnet-create apexlake_outbound_network 192.168.1.0/24 \ - --name apexlake_outbound_subnet - - -5. Download Ubuntu Cloud Image and load it on Glance - -The virtual Traffic Classifier is supported on top of Ubuntu 14.04 cloud image. -The image can be downloaded on the local machine and loaded on Glance -using the following commands: - -:: - - wget cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-disk1.img - glance image-create \ - --name ubuntu1404 \ - --is-public true \ - --disk-format qcow \ - --container-format bare \ - --file trusty-server-cloudimg-amd64-disk1.img - - - -6. Configure the Test Cases - -The VLAN tags must also be included in the test case Yardstick yaml file -as parameters for the following test cases: - - * :doc:`opnfv_yardstick_tc006` - - * :doc:`opnfv_yardstick_tc007` - - * :doc:`opnfv_yardstick_tc020` - - * :doc:`opnfv_yardstick_tc021` - - -Install and Configure DPDK Pktgen -+++++++++++++++++++++++++++++++++ - -Execution of the framework is based on DPDK Pktgen. -If DPDK Pktgen has not installed, it is necessary to download, install, compile -and configure it. -The user can create a directory and download the dpdk packet generator source -code: - -:: - - cd experimental_framework/libraries - mkdir dpdk_pktgen - git clone https://github.com/pktgen/Pktgen-DPDK.git - -For instructions on the installation and configuration of DPDK and DPDK Pktgen -please follow the official DPDK Pktgen README file. -Once the installation is completed, it is necessary to load the DPDK kernel -driver, as follow: - -:: - - insmod uio - insmod DPDK_DIR/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko - -It is necessary to set the configuration file to support the desired Pktgen -configuration. -A description of the required configuration parameters and supporting examples -is provided in the following: - -:: - - [PacketGen] - packet_generator = dpdk_pktgen - - # This is the directory where the packet generator is installed - # (if the user previously installed dpdk-pktgen, - # it is required to provide the director where it is installed). - pktgen_directory = /home/user/software/dpdk_pktgen/dpdk/examples/pktgen/ - - # This is the directory where DPDK is installed - dpdk_directory = /home/user/apexlake/experimental_framework/libraries/Pktgen-DPDK/dpdk/ - - # Name of the dpdk-pktgen program that starts the packet generator - program_name = app/app/x86_64-native-linuxapp-gcc/pktgen - - # DPDK coremask (see DPDK-Pktgen readme) - coremask = 1f - - # DPDK memory channels (see DPDK-Pktgen readme) - memory_channels = 3 - - # Name of the interface of the pktgen to be used to send traffic (vlan_sender) - name_if_1 = p1p1 - - # Name of the interface of the pktgen to be used to receive traffic (vlan_receiver) - name_if_2 = p1p2 - - # PCI bus address correspondent to if_1 - bus_slot_nic_1 = 01:00.0 - - # PCI bus address correspondent to if_2 - bus_slot_nic_2 = 01:00.1 - - -To find the parameters related to names of the NICs and the addresses of the PCI buses -the user may find it useful to run the :term:`DPDK` tool nic_bind as follows: - -:: - - DPDK_DIR/tools/dpdk_nic_bind.py --status - -Lists the NICs available on the system, and shows the available drivers and bus addresses for each interface. -Please make sure to select NICs which are :term:`DPDK` compatible. - -Installation and Configuration of smcroute -++++++++++++++++++++++++++++++++++++++++++ - -The user is required to install smcroute which is used by the framework to -support multicast communications. - -The following is the list of commands required to download and install smroute. - -:: - - cd ~ - git clone https://github.com/troglobit/smcroute.git - cd smcroute - git reset --hard c3f5c56 - sed -i 's/aclocal-1.11/aclocal/g' ./autogen.sh - sed -i 's/automake-1.11/automake/g' ./autogen.sh - ./autogen.sh - ./configure - make - sudo make install - cd .. - -It is required to do the reset to the specified commit ID. -It is also requires the creation a configuration file using the following -command: - -:: - - SMCROUTE_NIC=(name of the nic) - -where name of the nic is the name used previously for the variable "name_if_2". -For example: - -:: - - SMCROUTE_NIC=p1p2 - -Then create the smcroute configuration file /etc/smcroute.conf - -:: - - echo mgroup from $SMCROUTE_NIC group 224.192.16.1 > /etc/smcroute.conf - - -At the end of this procedure it will be necessary to perform the following -actions to add the user to the sudoers: - -:: - - adduser USERNAME sudo - echo "user ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers - - -Experiment using SR-IOV Configuration on the Compute Node -+++++++++++++++++++++++++++++++++++++++++++++++++++++++++ - -To enable :term:`SR-IOV` interfaces on the physical NIC of the compute node, a -compatible NIC is required. -NIC configuration depends on model and vendor. After proper configuration to -support :term:`SR-IOV`, a proper configuration of OpenStack is required. -For further information, please refer to the SRIOV_ configuration guide - -Finalize installation the framework on the system -================================================= - -The installation of the framework on the system requires the setup of the project. -After entering into the apexlake directory, it is sufficient to run the following -command. - -:: - - python setup.py install - -Since some elements are copied into the /tmp directory (see configuration file) -it could be necessary to repeat this step after a reboot of the host. |