aboutsummaryrefslogtreecommitdiffstats
path: root/docs/results/compass-os-nosdn-nofeature-ha.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/results/compass-os-nosdn-nofeature-ha.rst')
-rw-r--r--docs/results/compass-os-nosdn-nofeature-ha.rst133
1 files changed, 0 insertions, 133 deletions
diff --git a/docs/results/compass-os-nosdn-nofeature-ha.rst b/docs/results/compass-os-nosdn-nofeature-ha.rst
deleted file mode 100644
index bc75a2c10..000000000
--- a/docs/results/compass-os-nosdn-nofeature-ha.rst
+++ /dev/null
@@ -1,133 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-==============================================
-Test Results for compass-os-nosdn-nofeature-ha
-==============================================
-
-.. toctree::
- :maxdepth: 2
-
-
-Details
-=======
-
-.. _Grafana: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _SC_POD: https://wiki.opnfv.org/pharos?&#community_test_labs
-
-Overview of test results
-------------------------
-
-See Grafana_ for viewing test result metrics for each respective test case. It
-is possible to chose which specific scenarios to look at, and then to zoom in
-on the details of each run test scenario as well.
-
-All of the test case results below are based on 5 consecutive scenario test
-runs, each run on the Huawei SC_POD_ between February 13 and 18 in 2016. The
-best would be to have more runs to draw better conclusions from, but these are
-the only runs available at the time of OPNFV R2 release
-
-TC002
------
-The round-trip-time (RTT) between 2 VMs on different blades is measured using
-ping. The measurements are on average varying between 1.95 and 2.23 ms
-with a first 2 - 3.27 ms RTT spike in the beginning of each run (This could be
-because of normal ARP handling).SLA set to 10 ms. The SLA value is used as a
-reference, it has not been defined by OPNFV.
-
-TC005
------
-The IO read bandwidth look similar between different test runs, with an
-average at approx. 145-162 MB/s. Within each run the results vary much,
-minimum 2MB/s and maximum 712MB/s on the totality.
-SLA set to 400KB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC010
------
-The measurements for memory latency are consistent among test runs and results
-in approx. 1.2 ns. The variations between runs are similar, between
-1.215 and 1.278 ns. SLA set to 30 ns. The SLA value is used as
-a reference, it has not been defined by OPNFV.
-
-TC011
------
-For this scenario no results are available to report on. Probable reason is
-an integer/floating point issue regarding how InfluxDB is populated with
-result data from the test runs.
-
-TC012
------
-The average measurements for memory bandwidth are consistent among most of the
-different test runs at 12.98 - 16.73 GB/s. The last test run averages at
-16.67 GB/s. Within each run the results vary, with minimal BW of 16.59
-GB/s and maximum of 16.71 GB/s of the totality.
-SLA set to 15 GB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC014
------
-The Unixbench processor single and parallel speed scores show similar results
-at approx. 3000. The runs vary between scores 2499 and 3105.
-No SLA set.
-
-TC027
------
-The round-trip-time (RTT) between VM1 with ipv6 router on different blades is
-measured using ping6. The measurements are consistent at approx. 4 ms.
-SLA set to 30 ms.The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC037
------
-The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
-on different blades are measured when increasing the amount of UDP flows sent
-between the VMs using pktgen as packet generator tool.
-
-Round trip times and packet throughput between VMs are typically affected by
-the amount of flows set up and result in higher RTT and less PPS
-throughput.
-
-When running with less than 10000 flows the results are flat and consistent.
-RTT is then approx. 30 ms and the number of PPS remains flat at approx.
-230000 PPS. Beyond approx. 10000 flows and up to 1000000 (one million) there
-is an even drop in RTT and PPS performance, eventually ending up at approx.
-105-113 ms and 100000 PPS respectively.
-
-TC040
------
-test purpose is to verify the function of Yang-to-Tosca in Parse, and this test
-case is a weekly task, so it was triggered by manually, the result whether the
-output is same with expected outcome is success
-No SLA set.
-
-Detailed test results
----------------------
-
-The scenario was run on Huawei SC_POD_ with:
-Compass 1.0
-OpenStack Liberty
-OVS 2.4.0
-
-No SDN controller installed
-
-Rationale for decisions
------------------------
-Pass
-
-Tests were successfully executed and metrics collects (apart from TC011_).
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-
-The pktgen test configuration has a relatively large base effect on RTT in
-TC037 compared to TC002, where there is no background load at all (30 ms
-compared to 1 ms or less, which is more than a 3000 percentage different
-in RTT results). The larger amounts of flows in TC037 generate worse
-RTT results, in the magnitude of several hundreds of milliseconds. It would
-be interesting to also make and compare all these measurements to completely
-(optimized) bare metal machines running native Linux with all other relevant
-tools available, e.g. lmbench, pktgen etc.