diff options
Diffstat (limited to 'docs/release/results')
36 files changed, 2086 insertions, 2886 deletions
diff --git a/docs/release/results/euphrates_fraser_comparsion.rst b/docs/release/results/euphrates_fraser_comparsion.rst new file mode 100644 index 000000000..222dc8bb0 --- /dev/null +++ b/docs/release/results/euphrates_fraser_comparsion.rst @@ -0,0 +1,8 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + +======================================================= +Test results analysis for Euphrates and Fraser releases +======================================================= + diff --git a/docs/release/results/images/tc002_pod.png b/docs/release/results/images/tc002_pod.png Binary files differnew file mode 100644 index 000000000..7f92c471d --- /dev/null +++ b/docs/release/results/images/tc002_pod.png diff --git a/docs/release/results/images/tc002_scenario.png b/docs/release/results/images/tc002_scenario.png Binary files differnew file mode 100644 index 000000000..0ea1ecec6 --- /dev/null +++ b/docs/release/results/images/tc002_scenario.png diff --git a/docs/release/results/images/tc010_pod.png b/docs/release/results/images/tc010_pod.png Binary files differnew file mode 100644 index 000000000..c7c623481 --- /dev/null +++ b/docs/release/results/images/tc010_pod.png diff --git a/docs/release/results/images/tc010_scenario.png b/docs/release/results/images/tc010_scenario.png Binary files differnew file mode 100644 index 000000000..7c53a5fab --- /dev/null +++ b/docs/release/results/images/tc010_scenario.png diff --git a/docs/release/results/images/tc011_pod.png b/docs/release/results/images/tc011_pod.png Binary files differnew file mode 100644 index 000000000..8fec72f5a --- /dev/null +++ b/docs/release/results/images/tc011_pod.png diff --git a/docs/release/results/images/tc011_scenario.png b/docs/release/results/images/tc011_scenario.png Binary files differnew file mode 100644 index 000000000..2d78ea372 --- /dev/null +++ b/docs/release/results/images/tc011_scenario.png diff --git a/docs/release/results/images/tc012_pod.png b/docs/release/results/images/tc012_pod.png Binary files differnew file mode 100644 index 000000000..0f2a00910 --- /dev/null +++ b/docs/release/results/images/tc012_pod.png diff --git a/docs/release/results/images/tc012_scenario.png b/docs/release/results/images/tc012_scenario.png Binary files differnew file mode 100644 index 000000000..16257988d --- /dev/null +++ b/docs/release/results/images/tc012_scenario.png diff --git a/docs/release/results/images/tc014_pod.png b/docs/release/results/images/tc014_pod.png Binary files differnew file mode 100644 index 000000000..63aead2e8 --- /dev/null +++ b/docs/release/results/images/tc014_pod.png diff --git a/docs/release/results/images/tc014_scenario.png b/docs/release/results/images/tc014_scenario.png Binary files differnew file mode 100644 index 000000000..98f23ba1b --- /dev/null +++ b/docs/release/results/images/tc014_scenario.png diff --git a/docs/release/results/images/tc069_pod.png b/docs/release/results/images/tc069_pod.png Binary files differnew file mode 100644 index 000000000..66b272cb4 --- /dev/null +++ b/docs/release/results/images/tc069_pod.png diff --git a/docs/release/results/images/tc069_scenario.png b/docs/release/results/images/tc069_scenario.png Binary files differnew file mode 100644 index 000000000..caf12f8d5 --- /dev/null +++ b/docs/release/results/images/tc069_scenario.png diff --git a/docs/release/results/images/tc082_pod.png b/docs/release/results/images/tc082_pod.png Binary files differnew file mode 100644 index 000000000..89e01666b --- /dev/null +++ b/docs/release/results/images/tc082_pod.png diff --git a/docs/release/results/images/tc082_scenario.png b/docs/release/results/images/tc082_scenario.png Binary files differnew file mode 100644 index 000000000..637a739c3 --- /dev/null +++ b/docs/release/results/images/tc082_scenario.png diff --git a/docs/release/results/images/tc083_pod.png b/docs/release/results/images/tc083_pod.png Binary files differnew file mode 100644 index 000000000..f874191e4 --- /dev/null +++ b/docs/release/results/images/tc083_pod.png diff --git a/docs/release/results/images/tc083_scenario.png b/docs/release/results/images/tc083_scenario.png Binary files differnew file mode 100644 index 000000000..afd80aa02 --- /dev/null +++ b/docs/release/results/images/tc083_scenario.png diff --git a/docs/release/results/index.rst b/docs/release/results/index.rst index 0560152e0..3ec9e1cff 100644 --- a/docs/release/results/index.rst +++ b/docs/release/results/index.rst @@ -14,3 +14,4 @@ Yardstick test results .. include:: ./overview.rst .. include:: ./results.rst +.. include:: ./euphrates_fraser_comparsion.rst diff --git a/docs/release/results/os-nosdn-kvm-ha.rst b/docs/release/results/os-nosdn-kvm-ha.rst deleted file mode 100644 index a8a56f80e..000000000 --- a/docs/release/results/os-nosdn-kvm-ha.rst +++ /dev/null @@ -1,270 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -================================ -Test Results for os-nosdn-kvm-ha -================================ - -.. toctree:: - :maxdepth: 2 - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test -runs, each run on the Ericsson POD2_ or LF POD2_ between August 24 and 30 in -2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.44 and 0.75 ms. -A few runs start with a 0.65 - 0.68 ms RTT spike (This could be because of -normal ARP handling). One test run has a greater RTT spike of 1.49 ms. -To be able to draw conclusions more runs should be made. SLA set to 10 ms. -The SLA value is used as a reference, it has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 92 and 204 MB/s. Within each test run the results -vary, with a minimum 2 MB/s and maximum 819 MB/s on the totality. Most runs -have a minimum BW of 3 MB/s (one run at 2 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 238 and 819 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 2.07 ns. The variations within each test run are similar, between -1.41 and 3.53 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. The reported packet delay variation varies between 0.0051 and 0.0243 ms, -with an average delay variation between 0.0081 ms and 0.0195 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth result in -approx. 13.6 GB/s. Within each test run the results vary more, with a minimal -BW of 6.09 GB/s and maximum of 16.47 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 2316 and 3619, -one result each date. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -22.6 and 29.1 GB/s. Within each test run the results vary more, with a minimal -BW of 20.0 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - -Conclusions and recommendations -------------------------------- -The pktgen test configuration has a relatively large base effect on RTT in -TC037 compared to TC002, where there is no background load at all. Approx. -15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage -difference in RTT results. -Especially RTT and throughput come out with better results than for instance -the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should -probably be further analyzed and understood. Also of interest could be -to make further analyzes to find patterns and reasons for lost traffic. -Also of interest could be to see if there are continuous variations where -some test cases stand out with better or worse results than the general test -case. - diff --git a/docs/release/results/os-nosdn-nofeature-ha.rst b/docs/release/results/os-nosdn-nofeature-ha.rst deleted file mode 100644 index 9e52731d5..000000000 --- a/docs/release/results/os-nosdn-nofeature-ha.rst +++ /dev/null @@ -1,492 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -====================================== -Test Results for os-nosdn-nofeature-ha -====================================== - -.. toctree:: - :maxdepth: 2 - - -apex -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD1: https://wiki.opnfv.org/pharos?&#community_test_labs - - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test -runs, each run on the LF POD1_ between August 25 and 28 in -2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.74 and 1.08 ms. -A few runs start with a 0.99 - 1.07 ms RTT spike (This could be because of -normal ARP handling). One test run has a greater RTT spike of 1.35 ms. -To be able to draw conclusions more runs should be made. SLA set to 10 ms. -The SLA value is used as a reference, it has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 128 and 136 MB/s. Within each test run the results -vary, with a minimum 5 MB/s and maximum 446 MB/s on the totality. Most runs -have a minimum BW of 5 MB/s (one run at 6 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 416 and 446 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 1.09 ns. The variations within each test run are similar, between -1.0860 and 1.0880 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. The reported packet delay variation varies between 0.0025 and 0.0148 ms, -with an average delay variation between 0.0056 ms and 0.0157 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth result in -approx. 19.70 GB/s. Within each test run the results vary more, with a minimal -BW of 18.16 GB/s and maximum of 20.13 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 3224.4 and 3842.8, -one result each date. The average score on the total is 3659.5. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -22.6 and 29.1 GB/s. Within each test run the results vary more, with a minimal -BW of 20.0 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on LF POD1_ with: -Apex -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - - -Joid -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD5: https://wiki.opnfv.org/pharos?&#community_test_labs - - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD5_ between September 11 and 14 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.59 and 1.70 ms. -Two test runs have reached the same greater RTT spike of 3.06 ms, which are -1.66 and 1.70 ms average, but only one has the lower RTT of 1.35 ms. The other -two runs have no similar spike at all. To be able to draw conclusions more runs -should be made. SLA set to be 10 ms. The SLA value is used as a reference, it -has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput and the -greatest IO read bandwidth of the four runs is 173.3 MB/s. The IO read -bandwidth of the four runs looks similar on different four days, with an -average between 32.7 and 60.4 MB/s. One of the runs has a minimum BW of 429 -KM/s and other has a maximum BW of 173.3 MB/s. The SLA of read bandwidth sets -to be 400 MB/s, which is used as a reference, and it has not been defined by -OPNFV. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is 1.1 ns on average. The -variations within each test run are different, some vary from a large range and -others have a small change. For example, the largest change is on September 14, -the memory read latency of which is ranging from 1.12 ns to 1.22 ns. However, -the results on September 12 change very little, which range from 1.14 ns to -1.17 ns. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the pocket delay variation between 2 VMs on -different blades. The reported pocket delay variations of the four test runs -differ from each other. The results on September 13 within the date look -similar and the values are between 0.0087 and 0.0190 ms, which is 0.0126 ms on -average. However, on the fourth day, the pocket delay variation has a large -wide change within the date, which ranges from 0.0032 ms to 0.0121 ms and has -the minimum average value. The pocket delay variations of other two test runs -look relatively similar, which are 0.0076 ms and 0.0152 ms on average. The SLA -value sets to be 10 ms. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the memory -bandwidth within the second day almost keep stable, which is 11.58 GB/s on -average. And the memory bandwidth of the fourth day look similar as that of the -second day, both of which remain stable. The other two test runs relatively -change from a large wide range, in which the minimum memory bandwidth is 11.22 -GB/s and the maximum bandwidth is 16.65 GB/s with an average bandwidth of about -12.20 GB/s. Here SLA set to be 15 GB/s. The SLA value is used as a reference, -it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to measure processing speed, that is instructions per -second. It can be seen from the dashboard that the processing test results -vary from scores 3272 to 3444, and there is only one result one date. The -overall average score is 3371. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is 119.85, 128.02, 121.40 and -126.08 kpps, of which the result of the second is the highest. The RTT results -of all the test runs keep flat at approx. 37 ms. It is obvious that the PPS -results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 184 kpps and the -minimum throughput is 49 K respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is 38 ms, of which the worest RTT is -93 ms on Sep. 14th. - -CPU load of the four test runs have a large change, since the minimum value and -the peak of CPU load is 0 percent and 51 percent respectively. And the best -result is obtained on Sep. 14th. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 22.3 GB/s to 26.8 GB/s and then to 18.5 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 8 kb and 16 kb, the memory write bandwidth -look similar with a minimal BW of 22.5 GB/s and peak value of 28.7 GB/s. SLA -sets to be 7 GB/s. The SLA value is used as a a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT can reach -more than 80 ms and the average RTT is usually approx. 38 ms. On the whole, the -average RTTs of the four runs keep flat. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 268 MiB on Sep -14, which also has the largest minimum memory. Besides, the rest three test -runs have the similar used memory. On the other hand, the free memory of the -four runs have the same smallest minimum value, that is about 223 MiB, and the -maximum free memory of three runs have the similar result, that is 337 MiB, -except that on Sep. 14th, whose maximum free memory is 254 MiB. On the whole, -all the test runs have similar average free memory. - -Network throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -network throughput of the four test runs seem quite different, ranging from -119.85 kpps to 128.02 kpps. The average number of flows in these tests is -24000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 49.4k and 193.3k with an average packet throughput of approx. -125k. On the whole, the PPS results seem consistent. Within each test run of -the four runs, when number of flows becomes larger, the packet throughput seems -not larger in the meantime. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT can reach -more than 94 ms and the average RTT is usually approx. 35 ms. On the whole, the -average RTTs of the four runs keep flat. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool.The largest -cache size is 212 MiB in the four runs, and the smallest cache size is 75 MiB. -On the whole, the average cache size of the four runs is approx. 208 MiB. -Meanwhile, the tread of the buffer size looks similar with each other. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite different, ranging from 119.85 kpps to 128.02 -kpps. The average number of flows in these tests is 239.7k, and each run has a -minimum number of flows of 2 and a maximum number of flows of 1.001 Mil. At the -same time, the corresponding packet throughput differ between 49.4k and 193.3k -with an average packet throughput of approx. 125k. On the whole, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 32 ms. The PPS results are not as consistent as the RTT results. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second differs from each other, in which the smallest number of -packets transmitted per second is 6 pps on Sep. 12ed and the largest of that is -210.8 kpps. Meanwhile, the largest total number of packets received per second -differs from each other, in which the smallest number of packets received per -second is 2 pps on Sep. 13rd and the largest of that is 250.2 kpps. - -In some test runs when running with less than approx. 90000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 1000000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD5_ with: -Joid -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - - diff --git a/docs/release/results/os-nosdn-nofeature-noha.rst b/docs/release/results/os-nosdn-nofeature-noha.rst deleted file mode 100644 index 8b7c184bb..000000000 --- a/docs/release/results/os-nosdn-nofeature-noha.rst +++ /dev/null @@ -1,259 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -======================================== -Test Results for os-nosdn-nofeature-noha -======================================== - -.. toctree:: - :maxdepth: 2 - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD5: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD5_ between September 12 and 15 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.50 and 1.68 ms. -Only one test run has reached greatest RTT spike of 2.92 ms, which has -the smallest RTT of 1.06 ms. The other three runs have no similar spike at all, -the minimum and average RTTs of which are approx. 1.50 ms and 1.68 ms. SLA set to -be 10 ms. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 177.5 -MB/s. The IO read bandwidth of the four runs looks similar on different four -days, with an average between 46.7 and 62.5 MB/s. One of the runs has a minimum -BW of 680 KM/s and other has a maximum BW of 177.5 MB/s. The SLA of read -bandwidth sets to be 400 MB/s, which is used as a reference, and it has not -been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -test runs all have an approx. 1.55 K/s for IO reading with an minimum value of -less than 60 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.134 ns and 1.227 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 15, the memory read latency of which is ranging -from 1.116 ns to 1.393 ns. However, the results on September 12 change very -little, which mainly keep flat and range from 1.124 ns to 1.55 ns. The SLA sets -to be 30 ns. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the pocket delay variation between 2 VMs on -different blades. The reported pocket delay variations of the four test runs -differ from each other. The results on September 13 within the date look -similar and the values are between 0.0213 and 0.0225 ms, which is 0.0217 ms on -average. However, on the third day, the packet delay variation has a large -wide change within the date, which ranges from 0.008 ms to 0.0225 ms and has -the minimum value. On Sep. 12, the packet delay is quite long, for the value is -between 0.0236 and 0.0287 ms and it also has the maximum packet delay of 0.0287 -ms. The packet delay of the last test run is 0.0151 ms on average. The SLA -value sets to be 10 ms. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the memory -bandwidth of three test runs almost keep stable within each run, which is -11.65, 11.57 and 11.64 GB/s on average. However, the memory read and write -bandwidth on Sep. 14 has a large range, for it ranges from 11.36 GB/s to 16.68 -GB/s. Here SLA set to be 15 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3222 to 3585, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is 124.8, 160.1, 113.8 and -137.3 kpps, of which the result of the second is the highest. The RTT results -of all the test runs keep flat at approx. 37 ms. It is obvious that the PPS -results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 243.1 kpps and the -minimum throughput is 37.6 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is between 32 ms and 41 ms, of which -the worest RTT is 155 ms on Sep. 14th. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and 9 percent respectively. And the best result is obtained on Sep. -15th, with an CPU load of nine percent. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 22.4 GB/s to 26.5 GB/s and then to 18.6 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 8 kb and 16 kb, the memory write bandwidth -look similar with a minimal BW of 22.5 GB/s and peak value of 28.7 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of three test runs look -similar with each other, and Within these test runs, the maximum RTT can reach -95 ms and the average RTT is usually approx. 36 ms. The network latency tested -on Sep. 14 shows that it has a peak latency of 155 ms. But on the whole, the -average RTTs of the four runs keep flat. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 270 MiB on Sep -13, which also has the smallest minimum memory utilization. Besides, the rest -three test runs have the similar used memory with an average memory usage of -264 MiB. On the other hand, the free memory of the four runs have the same -smallest minimum value, that is about 223 MiB, and the maximum free memory of -three runs have the similar result, that is 226 MiB, except that on Sep. 13th, -whose maximum free memory is 273 MiB. On the whole, all the test runs have -similar average free memory. - -Network throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -network throughput of the four test runs seem quite different, ranging from -119.85 kpps to 128.02 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 38k and 243k with an average packet throughput of approx. 134k. -On the whole, the PPS results seem consistent. Within each test run of the four -runs, when number of flows becomes larger, the packet throughput seems not -larger in the meantime. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT can reach -79 ms and the average RTT is usually approx. 35 ms. On the whole, the average -RTTs of the four runs keep flat. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool.The largest -cache size is 214 MiB in the four runs, and the smallest cache size is 100 MiB. -On the whole, the average cache size of the four runs is approx. 210 MiB. -Meanwhile, the tread of the buffer size looks similar with each other. On the -other hand, the mean buffer size of the four runs keep flat, since they have a -minimum value of approx. 7 MiB and a maximum value of 8 MiB, with an average -value of about 8 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite different, ranging from 113.8 kpps to 124.8 kpps. -The average number of flows in these tests is 240k, and each run has a minimum -number of flows of 2 and a maximum number of flows of 1.001 Mil. At the same -time, the corresponding packet throughput differ between 47.6k and 243.1k with -an average packet throughput between 113.8k and 160.1k. Within each test run of -the four runs, when number of flows becomes larger, the packet throughput seems -not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 79 ms with an average leatency of approx. 35 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 113.8 kpps to 124.8 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar on the first three runs with a minimum -number of 10 pps and a maximum number of 97 kpps, except the one on Sep. 15th, -in which the number of packets transmitted per second is 10 pps. Meanwhile, the -largest total number of packets received per second differs from each other, -in which the smallest number of packets received per second is 1 pps and the -largest of that is 276 kpps. - -In some test runs when running with less than approx. 90000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 1000000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD5_ with: -Joid -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. diff --git a/docs/release/results/os-odl_l2-bgpvpn-ha.rst b/docs/release/results/os-odl_l2-bgpvpn-ha.rst deleted file mode 100644 index 2bd6dc35d..000000000 --- a/docs/release/results/os-odl_l2-bgpvpn-ha.rst +++ /dev/null @@ -1,53 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -==================================== -Test Results for os-odl_l2-bgpvpn-ha -==================================== - -.. toctree:: - :maxdepth: 2 - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Ericsson POD2_ between September 7 and 11 in 2016. - -TC043 ------ -The round-trip-time (RTT) between 2 nodes is measured using -ping. Most test run measurements result on average between 0.21 and 0.28 ms. -A few runs start with a 0.32 - 0.35 ms RTT spike (This could be because of -normal ARP handling). To be able to draw conclusions more runs should be made. -SLA set to 10 ms. The SLA value is used as a reference, it has not been defined -by OPNFV. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - diff --git a/docs/release/results/os-odl_l2-nofeature-ha.rst b/docs/release/results/os-odl_l2-nofeature-ha.rst deleted file mode 100644 index ac0c5bb59..000000000 --- a/docs/release/results/os-odl_l2-nofeature-ha.rst +++ /dev/null @@ -1,743 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -======================================= -Test Results for os-odl_l2-nofeature-ha -======================================= - -.. toctree:: - :maxdepth: 2 - - -apex -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD1: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the LF POD1_ between September 14 and 17 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.49 ms and 0.60 ms. -Only one test run has reached greatest RTT spike of 0.93 ms. Meanwhile, the -smallest network latency is 0.33 ms, which is obtained on Sep. 14th. -SLA set to be 10 ms. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 416 -MB/s. The IO read bandwidth of all four runs looks similar, with an average -between 128 and 131 MB/s. One of the runs has a minimum BW of 497 KB/s. The SLA -of read bandwidth sets to be 400 MB/s, which is used as a reference, and it has -not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value at 1k per -second, and meanwhile, the minimum result is only 45 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.0859 ns and -1.0869 ns on average. The variations within each test run are quite different, -some vary from a large range and others have a small change. For example, the -largest change is on September 14th, the memory read latency of which is ranging -from 1.091 ns to 1.086 ns. However. -The SLA sets to be 30 ns. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. On the first two test runs the reported packet delay variation varies between -0.0037 and 0.0740 ms, with an average delay variation between 0.0096 ms and 0.0321. -On the second date the delay variation varies between 0.0063 and 0.0096 ms, with -an average delay variation of 0.0124 - 0.0141 ms. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the trend of -three memory bandwidth almost look similar, which all have a narrow range, and -the average result is 19.88 GB/s. Here SLA set to be 15 GB/s. The SLA value is -used as a reference, it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3754k to 3831k, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is between 307.3 kpps and -447.1 kpps, of which the result of the third run is the highest. The RTT -results of all the test runs keep flat at approx. 15 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 418.1 kpps and the -minimum throughput is 326.5 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is approx. 15 ms. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and nine percent respectively. And the best result is obtained on Sep. -1, with an CPU load of nine percent. But on the whole, the CPU load is very -poor, since the average value is quite small. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 28.2 GB/s to 29.5 GB/s and then to 29.2 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 2 kb or 16 kb, the memory write bandwidth -look similar with a minimal BW of 25.8 GB/s and peak value of 28.3 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 39 ms and the average RTT is usually approx. 15 ms. The network latency -tested on Sep. 1 and Sep. 8 have a peak latency of 39 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 267 MiB for the -four runs. In general, the four test runs have very large memory utilization, -which can reach 257 MiB on average. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 233 MiB to 241 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -305.3 kpps to 447.1 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding average packet -throughput is between 354.4 kpps and 381.8 kpps. In summary, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 42 -ms and the average RTT is usually approx. 15 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 212 MiB, which is same for the four runs, and the smallest cache -size is 75 MiB. On the whole, the average cache size of the four runs look the -same and is between 197 MiB and 211 MiB. Meanwhile, the tread of the buffer -size keep flat, since they have a minimum value of 7 MiB and a maximum value of -8 MiB, with an average value of about 7.9 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs differ from 354.4 kpps to 381.8 kpps. The average number of -flows in these tests is 240k, and each run has a minimum number of flows of 2 -and a maximum number of flows of 1.001 Mil. At the same time, the corresponding -packet throughput differ between 305.3 kpps to 447.1 kpps. Within each test run -of the four runs, when number of flows becomes larger, the packet throughput -seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 42 ms with an average leatency of less than 15 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 354.4 kpps to 381.8 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for three test runs, whose values change a -lot from 10 pps to 501 kpps. While results of the rest test run seem the same -and keep stable with the average number of packets transmitted per second of 10 -pps. However, the total number of packets received per second of the four runs -look similar, which have a large wide range of 2 pps to 815 kpps. - -In some test runs when running with less than approx. 251000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 251000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on LF POD1_ with: -Apex -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Ericsson POD2_ or LF POD2_ between August 25 and 29 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.5 and 0.6 ms. -A few runs start with a 1 - 1.5 ms RTT spike (This could be because of normal ARP -handling). One test run has a greater RTT spike of 1.9 ms, which is the same -one with the 0.7 ms average. The other runs have no similar spike at all. -To be able to draw conclusions more runs should be made. -SLA set to 10 ms. The SLA value is used as a reference, it has not -been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 170 and 200 MB/s. Within each test run the results -vary, with a minimum 2 MB/s and maximum 838 MB/s on the totality. Most runs -have a minimum BW of 3 MB/s (two runs at 2 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 617 and 838 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 1.2 ns. The variations within each test run are similar, between -1.215 and 1.219 ns. One exception is February 16, where the average is 1.222 -and varies between 1.22 and 1.28 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. On the first date the reported packet delay variation varies between -0.0025 and 0.011 ms, with an average delay variation of 0.0067 ms. -On the second date the delay variation varies between 0.002 and 0.006 ms, with -an average delay variation of 0.004 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth vary between -17.4 and 17.9 GB/s. Within each test run the results vary more, with a minimal -BW of 16.4 GB/s and maximum of 18.2 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 3080 and 3240, -one result each date. The average score on the total is 3150. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -15.5 and 25.4 GB/s. Within each test run the results vary more, with a minimal -BW of 9.7 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - -Conclusions and recommendations -------------------------------- -The pktgen test configuration has a relatively large base effect on RTT in -TC037 compared to TC002, where there is no background load at all. Approx. -15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage -difference in RTT results. -Especially RTT and throughput come out with better results than for instance -the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should -probably be further analyzed and understood. Also of interest could be -to make further analyzes to find patterns and reasons for lost traffic. -Also of interest could be to see if there are continuous variations where -some test cases stand out with better or worse results than the general test -case. - - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD6: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD6_ between September 1 and 8 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.01 ms and 1.88 ms. -Only one test run has reached greatest RTT spike of 1.88 ms. Meanwhile, the -smallest network latency is 1.01 ms, which is obtained on Sep. 1st. In general, -the average of network latency of the four test runs are between 1.29 ms and -1.34 ms. SLA set to be 10 ms. The SLA value is used as a reference, it has not -been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 183.65 -MB/s. The IO read bandwidth of the three runs looks similar, with an average -between 62.9 and 64.3 MB/s, except one on Sep. 1, for its maximum storage -throughput is only 159.1 MB/s. One of the runs has a minimum BW of 685 KB/s and -other has a maximum BW of 183.6 MB/s. The SLA of read bandwidth sets to be -400 MB/s, which is used as a reference, and it has not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value between -1.41k per second and 1.64k per second, and meanwhile, the minimum result is -only 55 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.152 ns and 1.179 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 8, the memory read latency of which is ranging -from 1.120 ns to 1.221 ns. However, the results on September 7 change very -little. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the packet delay variation between 2 VMs on -different blades. The reported packet delay variations of the four test runs -differ from each other. In general, the packet delay of the first two runs look -similar, for they both stay stable within each run. And the mean packet delay -of them are 0.0087 ms and 0.0127 ms respectively. Of the four runs, the fourth -has the worst result, because the packet delay reaches 0.0187 ms. The SLA value -sets to be 10 ms. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the trend of -three memory bandwidth almost look similar, which all have a narrow range, and -the average result is 11.78 GB/s. Here SLA set to be 15 GB/s. The SLA value is -used as a reference, it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3260k to 3328k, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is between 307.3 kpps and -447.1 kpps, of which the result of the third run is the highest. The RTT -results of all the test runs keep flat at approx. 15 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 418.1 kpps and the -minimum throughput is 326.5 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is approx. 15 ms. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and nine percent respectively. And the best result is obtained on Sep. -1, with an CPU load of nine percent. But on the whole, the CPU load is very -poor, since the average value is quite small. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 21.9 GB/s to 25.9 GB/s and then to 17.8 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 2 kb or 16 kb, the memory write bandwidth -look similar with a minimal BW of 24.8 GB/s and peak value of 27.8 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 39 ms and the average RTT is usually approx. 15 ms. The network latency -tested on Sep. 1 and Sep. 8 have a peak latency of 39 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 267 MiB for the -four runs. In general, the four test runs have very large memory utilization, -which can reach 257 MiB on average. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 233 MiB to 241 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -305.3 kpps to 447.1 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding average packet -throughput is between 354.4 kpps and 381.8 kpps. In summary, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 42 -ms and the average RTT is usually approx. 15 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 212 MiB, which is same for the four runs, and the smallest cache -size is 75 MiB. On the whole, the average cache size of the four runs look the -same and is between 197 MiB and 211 MiB. Meanwhile, the tread of the buffer -size keep flat, since they have a minimum value of 7 MiB and a maximum value of -8 MiB, with an average value of about 7.9 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs differ from 354.4 kpps to 381.8 kpps. The average number of -flows in these tests is 240k, and each run has a minimum number of flows of 2 -and a maximum number of flows of 1.001 Mil. At the same time, the corresponding -packet throughput differ between 305.3 kpps to 447.1 kpps. Within each test run -of the four runs, when number of flows becomes larger, the packet throughput -seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 42 ms with an average leatency of less than 15 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 354.4 kpps to 381.8 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for three test runs, whose values change a -lot from 10 pps to 501 kpps. While results of the rest test run seem the same -and keep stable with the average number of packets transmitted per second of 10 -pps. However, the total number of packets received per second of the four runs -look similar, which have a large wide range of 2 pps to 815 kpps. - -In some test runs when running with less than approx. 251000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 251000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD6_ with: -Joid -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - diff --git a/docs/release/results/os-odl_l2-sfc-ha.rst b/docs/release/results/os-odl_l2-sfc-ha.rst deleted file mode 100644 index e27562cae..000000000 --- a/docs/release/results/os-odl_l2-sfc-ha.rst +++ /dev/null @@ -1,231 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -================================== -Test Results for os-odl_l2-sfc-ha -================================== - -.. toctree:: - :maxdepth: 2 - - -Fuel -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the LF POD2_ or Ericsson POD2_ between September 16 and 20 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.32 ms and 1.42 ms. -Only one test run on Sep. 20 has reached greatest RTT spike of 4.66 ms. -Meanwhile, the smallest network latency is 0.16 ms, which is obtained on Sep. -17th. To sum up, the curve of network latency has very small wave, which is -less than 5 ms. SLA sets to be 10 ms. The SLA value is used as a reference, it -has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 734 -MB/s. The IO read bandwidth of the first three runs looks similar, with an -average of less than 100 KB/s, except one on Sep. 20, whose maximum storage -throughput can reach 734 MB/s. The SLA of read bandwidth sets to be 400 MB/s, -which is used as a reference, and it has not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value between -1.8k per second and 3.27k per second, and meanwhile, the minimum result is -only 60 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.085 ns and 1.218 -ns on average. The variations within each test run are quite small. For -Ericsson pod2, the average of memory latency is approx. 1.217 ms. While for LF -pod2, the average value is about 1.085 ms. It can be seen that the performance -of LF is better than Ericsson's. The SLA sets to be 30 ns. The SLA value is -used as a reference, it has not been defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. The four test runs all have a narrow range -of change with the average memory and write BW of 18.5 GB/s. Here SLA set to be -15 GB/s. The SLA value is used as a reference, it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3209k to 3843k, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the three test runs is between 439 kpps and -582 kpps, and the test run on Sep. 17th has the lowest average value of 371 -kpps. The RTT results of all the test runs keep flat at approx. 10 ms. It is -obvious that the PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved, since the largest packet throughput is 680 kpps and the -minimum throughput is 319 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar trend of RTT with the average value of approx. 12 ms. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and ten percent respectively. And the best result is obtained on Sep. -17th, with an CPU load of ten percent. But on the whole, the CPU load is very -poor, since the average value is quite small. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the average memory write -bandwidth tends to become larger first and then smaller within every run test -for the two pods, which rangs from 25.1 GB/s to 29.4 GB/s and then to 19.2 GB/s -on average. Since the test id is one, it is that only the INT memory write -bandwidth is tested. On the whole, with the block size becoming larger, the -memory write bandwidth tends to decrease. SLA sets to be 7 GB/s. The SLA value -is used as a reference, it has not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 27 ms and the average RTT is usually approx. 12 ms. The network latency -tested on Sep. 27th has a peak latency of 27 ms. But on the whole, the average -RTTs of the four runs keep flat. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 269 MiB for the -four runs. In general, the four test runs have very large memory utilization, -which can reach 251 MiB on average. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 231 MiB to 248 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -371 kpps to 582 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding average packet -throughput is between 319 kpps and 680 kpps. In summary, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 24 -ms and the average RTT is usually approx. 12 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 213 MiB, and the smallest cache size is 99 MiB, which is same for -the four runs. On the whole, the average cache size of the four runs look the -same and is between 184 MiB and 205 MiB. Meanwhile, the tread of the buffer -size keep stable, since they have a minimum value of 7 MiB and a maximum value of -8 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs differ from 371 kpps to 582 kpps. The average number of -flows in these tests is 240k, and each run has a minimum number of flows of 2 -and a maximum number of flows of 1.001 Mil. At the same time, the corresponding -packet throughput differ between 319 kpps to 680 kpps. Within each test run -of the four runs, when number of flows becomes larger, the packet throughput -seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 24 ms with an average leatency of less than 13 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 370 kpps to 582 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for the four test runs, whose values change a -lot from 10 pps to 697 kpps. However, the total number of packets received per -second of three runs look similar, which have a large wide range of 2 pps to -1.497 Mpps, while the results on Sep. 18th and 20th have very small maximum -number of packets received per second of 817 kpps. - -In some test runs when running with less than approx. 251000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 251000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. diff --git a/docs/release/results/os-onos-nofeature-ha.rst b/docs/release/results/os-onos-nofeature-ha.rst deleted file mode 100644 index d8b3ace5f..000000000 --- a/docs/release/results/os-onos-nofeature-ha.rst +++ /dev/null @@ -1,257 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -====================================== -Test Results for os-onos-nofeature-ha -====================================== - -.. toctree:: - :maxdepth: 2 - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD6: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 5 scenario test runs, each run -on the Intel POD6_ between September 13 and 16 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.50 and 1.68 ms. -Only one test run has reached greatest RTT spike of 2.62 ms, which has -the smallest RTT of 1.00 ms. The other four runs have no similar spike at all, -the minimum and average RTTs of which are approx. 1.06 ms and 1.32 ms. SLA set -to be 10 ms. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 175.4 -MB/s. The IO read bandwidth of the four runs looks similar on different four -days, with an average between 58.1 and 62.0 MB/s, except one on Sep. 14, for -its maximum storage throughput is only 133.0 MB/s. One of the runs has a -minimum BW of 497 KM/s and other has a maximum BW of 177.4 MB/s. The SLA of read -bandwidth sets to be 400 MB/s, which is used as a reference, and it has not -been defined by OPNFV. - -The results of storage IOPS for the five runs look similar with each other. The -IO read times per second of the five test runs have an average value between -1.20 K/s and 1.61 K/s, and meanwhile, the minimum result is only 41 times per -second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the five runs is between 1.146 ns and 1.172 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 13, the memory read latency of which is ranging -from 1.152 ns to 1.221 ns. However, the results on September 14 change very -little. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the packet delay variation between 2 VMs on -different blades. The reported packet delay variations of the five test runs -differ from each other. In general, the packet delay of the first two runs look -similar, for they both stay stable within each run. And the mean packet delay of -of them are 0.07714 ms and 0.07982 ms respectively. Of the five runs, the third -has the worst result, because the packet delay reaches 0.08384 ms. The trend of -therest two runs look the same, for the average packet delay are 0.07808 ms and -0.07727 ms respectively. The SLA value sets to be 10 ms. The SLA value is used -as a reference, it has not been defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the five test runs, the memory -bandwidth of last three test runs almost keep stable within each run, which is -11.64, 11.71 and 11.61 GB/s on average. However, the memory read and write -bandwidth on Sep. 13 has a large range, for it ranges from 6.68 GB/s to 11.73 -GB/s. Here SLA set to be 15 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3208 to 3314, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the five test runs is between 259.6 kpps and -318.4 kpps, of which the result of the second run is the highest. The RTT -results of all the test runs keep flat at approx. 20 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the five test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 398.9 kpps and the -minimum throughput is 250.6 kpps respectively. - -There are no errors of packets received in the five runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the five -runs have the similar average vaue, that is between 17 ms and 22 ms, of which -the worest RTT is 53 ms on Sep. 14th. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and 10 percent respectively. And the best result is obtained on Sep. -13rd, with an CPU load of 10 percent. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 21.6 GB/s to 26.8 GB/s and then to 18.4 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 8 kb and 16 kb, the memory write bandwidth -look similar with a minimal BW of 23.0 GB/s and peak value of 28.6 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the five test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 53 ms and the average RTT is usually approx. 18 ms. The network latency -tested on Sep. 14 shows that it has a peak latency of 53 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 272 MiB on Sep -14. In general, the mean used memory of the five test runs have the similar -trend and the minimum memory used size is approx. 150 MiB, and the average -used memory size is about 250 MiB. On the other hand, for the mean free memory, -the five test runs have the similar trend, whose mean free memory change from -218 MiB to 342 MiB, with an average value of approx. 38 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the five test runs seem quite different, ranging from -285.29 kpps to 297.76 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 250.6k and 398.9k with an average packet throughput between -277.2 K and 318.4 K. In summary, the PPS results seem consistent. Within each -test run of the five runs, when number of flows becomes larger, the packet -throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the five test runs -look similar with each other. Within each test run, the maximum RTT is only 49 -ms and the average RTT is usually approx. 20 ms. On the whole, the average -RTTs of the five runs keep stable and the network latency is relatively short. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool.The largest -cache size is 215 MiB in the four runs, and the smallest cache size is 95 MiB. -On the whole, the average cache size of the five runs change a little and is -about 200 MiB, except the one on Sep. 14th, the mean cache size is very small, -which keeps 102 MiB. Meanwhile, the tread of the buffer size keep flat, since -they have a minimum value of 7 MiB and a maximum value of 8 MiB, with an -average value of about 7.8 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite different, ranging from 285.29 kpps to 297.76 -kpps. The average number of flows in these tests is 239.7k, and each run has a -minimum number of flows of 2 and a maximum number of flows of 1.001 Mil. At the -same time, the corresponding packet throughput differ between 227.3k and 398.9k -with an average packet throughput between 277.2k and 318.4k. Within each test -run of the five runs, when number of flows becomes larger, the packet -throughput seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs - between 0 ms and 49 ms with an average leatency of less than 22 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the five runs differ from 250.6 kpps to 398.9 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for four test runs, whose values change a -lot from 10 pps to 399 kpps, except the one on Sep. 14th, whose total number -of transmitted per second keep stable, that is 10 pps. Similarly, the total -number of packets received per second look the same for four runs, except the -one on Sep. 14th, whose value is only 10 pps. - -In some test runs when running with less than approx. 90000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 250000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD6_ with: -Joid -OpenStack Mitaka -Onos Goldeneye -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. diff --git a/docs/release/results/os-onos-sfc-ha.rst b/docs/release/results/os-onos-sfc-ha.rst deleted file mode 100644 index e52ae3d55..000000000 --- a/docs/release/results/os-onos-sfc-ha.rst +++ /dev/null @@ -1,517 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -=============================== -Test Results for os-onos-sfc-ha -=============================== - -.. toctree:: - :maxdepth: 2 - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Ericsson POD2_ or LF POD2_ between September 5 and 10 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.5 and 0.6 ms. -A few runs start with a 1 - 1.5 ms RTT spike (This could be because of normal ARP -handling). One test run has a greater RTT spike of 1.9 ms, which is the same -one with the 0.7 ms average. The other runs have no similar spike at all. -To be able to draw conclusions more runs should be made. -SLA set to 10 ms. The SLA value is used as a reference, it has not -been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 170 and 200 MB/s. Within each test run the results -vary, with a minimum 2 MB/s and maximum 838 MB/s on the totality. Most runs -have a minimum BW of 3 MB/s (two runs at 2 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 617 and 838 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 1.2 ns. The variations within each test run are similar, between -1.215 and 1.219 ns. One exception is February 16, where the average is 1.222 -and varies between 1.22 and 1.28 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. On the first date the reported packet delay variation varies between -0.0025 and 0.011 ms, with an average delay variation of 0.0067 ms. -On the second date the delay variation varies between 0.002 and 0.006 ms, with -an average delay variation of 0.004 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth vary between -17.4 and 17.9 GB/s. Within each test run the results vary more, with a minimal -BW of 16.4 GB/s and maximum of 18.2 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 3080 and 3240, -one result each date. The average score on the total is 3150. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -15.5 and 25.4 GB/s. Within each test run the results vary more, with a minimal -BW of 9.7 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -Onos Goldeneye -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - -Conclusions and recommendations -------------------------------- -The pktgen test configuration has a relatively large base effect on RTT in -TC037 compared to TC002, where there is no background load at all. Approx. -15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage -difference in RTT results. -Especially RTT and throughput come out with better results than for instance -the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should -probably be further analyzed and understood. Also of interest could be -to make further analyzes to find patterns and reasons for lost traffic. -Also of interest could be to see if there are continuous variations where -some test cases stand out with better or worse results than the general test -case. - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD6: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD6_ between September 8 and 11 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.35 ms and 1.57 ms. -Only one test run has reached greatest RTT spike of 2.58 ms. Meanwhile, the -smallest network latency is 1.11 ms, which is obtained on Sep. 11st. In -general, the average of network latency of the four test runs are between 1.35 -ms and 1.57 ms. SLA set to be 10 ms. The SLA value is used as a reference, it -has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 175.4 -MB/s. The IO read bandwidth of the three runs looks similar, with an average -between 43.7 and 56.3 MB/s, except one on Sep. 8, for its maximum storage -throughput is only 107.9 MB/s. One of the runs has a minimum BW of 478 KM/s and -other has a maximum BW of 168.6 MB/s. The SLA of read bandwidth sets to be -400 MB/s, which is used as a reference, and it has not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value between -978 per second and 1.20 K/s, and meanwhile, the minimum result is only 36 times -per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.164 ns and 1.244 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 10, the memory read latency of which is ranging -from 1.128 ns to 1.381 ns. However, the results on September 11 change very -little. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the packet delay variation between 2 VMs on -different blades. The reported packet delay variations of the four test runs -differ from each other. In general, the packet delay of two runs look similar, -for they both stay stable within each run. And the mean packet delay of them -are 0.0772 ms and 0.0788 ms respectively. Of the four runs, the fourth has the -worst result, because the packet delay reaches 0.0838 ms. The rest one has a -large wide range from 0.0666 ms to 0.0798 ms. The SLA value sets to be 10 ms. -The SLA value is used as a reference, it has not been defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the trend of the -memory bandwidth almost look similar, which all have a large wide range, and -the minimum and maximum results are 9.02 GB/s and 18.14 GB/s. Here SLA set to -be 15 GB/s. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3395 to 3475, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is between 362.1 kpps and -363.5 kpps, of which the result of the third run is the highest. The RTT -results of all the test runs keep flat at approx. 17 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 418.1 kpps and the -minimum throughput is 326.5 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is approx. 17 ms, of which the worst -RTT is 39 ms on Sep. 11st. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and nine percent respectively. And the best result is obtained on Sep. -10, with an CPU load of nine percent. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 25.9 GB/s to 26.6 GB/s and then to 18.1 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is from 2 kb to 16 kb, the memory write -bandwidth look similar with a minimal BW of 22.1 GB/s and peak value of 28.6 -GB/s. And then with the block size becoming larger, the memory write bandwidth -tends to decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, -it has not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 39 ms and the average RTT is usually approx. 17 ms. The network latency -tested on Sep. 11 shows that it has a peak latency of 39 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 270 MiB on the -first two runs. In general, the mean used memory of two test runs have very -large memory utilization, which can reach 264 MiB on average. And the other two -runs have a large wide range of memory usage with the minimum value of 150 MiB -and the maximum value of 270 MiB. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 220 MiB to 342 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -326.5 kpps to 418.1 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 326.5 kpps and 418.1 kpps with an average packet throughput between -361.7 kpps and 363.5 kpps. In summary, the PPS results seem consistent. Within each -test run of the four runs, when number of flows becomes larger, the packet -throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 47 -ms and the average RTT is usually approx. 15 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 214 MiB, which is same for the four runs, and the smallest cache -size is 94 MiB. On the whole, the average cache size of the four runs look the -same and is between 198 MiB and 207 MiB. Meanwhile, the tread of the buffer -size keep flat, since they have a minimum value of 7 MiB and a maximum value of -8 MiB, with an average value of about 7.9 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite the same, which is approx. 363 kpps. The average -number of flows in these tests is 240k, and each run has a minimum number of -flows of 2 and a maximum number of flows of 1.001 Mil. At the same time, the -corresponding packet throughput differ between 327 kpps and 418 kpps with an -average packet throughput of about 363 kpps. Within each test run of the four -runs, when number of flows becomes larger, the packet throughput seems not -larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 47 ms with an average leatency of less than 16 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 361.7 kpps to 365.0 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for two test runs, whose values change a -lot from 10 pps to 432 kpps. While results of the other test runs seem the same -and keep stable with the average number of packets transmitted per second of 10 -pps. However, the total number of packets received per second of the four runs -look similar, which have a large wide range of 2 pps to 657 kpps. - -In some test runs when running with less than approx. 250000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 250000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD6_ with: -Joid -OpenStack Mitaka -Onos Goldeneye -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - diff --git a/docs/release/results/overview.rst b/docs/release/results/overview.rst index b4a050545..9fd74797c 100644 --- a/docs/release/results/overview.rst +++ b/docs/release/results/overview.rst @@ -42,55 +42,31 @@ environment, features or test framework. The list of scenarios supported by each installer can be described as follows: -+-------------------------+---------+---------+---------+---------+ -| Scenario | Apex | Compass | Fuel | Joid | -+=========================+=========+=========+=========+=========+ -| os-nosdn-nofeature-noha | | | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-nofeature-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-nofeature-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-nofeature-noha| | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l3-nofeature-ha | X | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l3-nofeature-noha| | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-onos-sfc-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-onos-sfc-noha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-onos-nofeature-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-onos-nofeature-noha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-sfc-ha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-sfc-noha | X | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-bgpvpn-ha | X | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-bgpvpn-noha | | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-kvm-ha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-kvm-noha | | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-ovs-ha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-ovs-noha | X | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-ocl-nofeature-ha | | | | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-lxd-ha | | | | X | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-lxd-noha | | | | X | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-fdio-noha | X | | | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-moon-ha | | X | | | -+-------------------------+---------+---------+---------+---------+ ++-------------------------+------+---------+----------+------+------+-------+ +| Scenario | Apex | Compass | Fuel-arm | Fuel | Joid | Daisy | ++=========================+======+=========+==========+======+======+=======+ +| os-nosdn-nofeature-noha | X | | | | X | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-nofeature-ha | X | | X | X | X | X | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-bar-noha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-bar-ha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl-bgpvpn-ha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-calipso-noha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-kvm-ha | | X | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl_l3-nofeature-ha | | X | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl-sfc-ha | | X | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl-nofeature-ha | | | | X | | X | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-ovs-ha | | | | X | | | ++-------------------------+------+---------+----------+------+------+-------+ To qualify for release, the scenarios must have deployed and been successfully tested in four consecutive installations to establish stability of deployment @@ -103,4 +79,4 @@ References * IEEE Std 829-2008. "Standard for Software and System Test Documentation". -* OPNFV Colorado release note for Yardstick. +* OPNFV Fraser release note for Yardstick. diff --git a/docs/release/results/results.rst b/docs/release/results/results.rst index 04c6b9f87..c75f5ae94 100644 --- a/docs/release/results/results.rst +++ b/docs/release/results/results.rst @@ -2,13 +2,16 @@ .. License. .. http://creativecommons.org/licenses/by/4.0 -Results listed by scenario +Results listed by test cases ========================== -The following sections describe the yardstick results as evaluated for the -Colorado release scenario validation runs. Each section describes the -determined state of the specific scenario as deployed in the Colorado -release process. +.. _TOM: https://wiki.opnfv.org/display/testing/R+post-processing+of+the+Yardstick+results + + +The following sections describe the yardstick test case results as evaluated +for the OPNFV Fraser release scenario validation runs. Each section describes +the determined state of the specific test case as executed in the Fraser release +process. All test date are analyzed using TOM_ tool. Scenario Results ================ @@ -16,21 +19,22 @@ Scenario Results .. _Dashboard: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main .. _Jenkins: https://build.opnfv.org/ci/view/yardstick/ + The following documents contain results of Yardstick test cases executed on -OPNFV labs, triggered by OPNFV CI pipeline, documented per scenario. +OPNFV labs, triggered by OPNFV CI pipeline, documented per test case. .. toctree:: :maxdepth: 1 - os-nosdn-nofeature-ha.rst - os-nosdn-nofeature-noha.rst - os-odl_l2-nofeature-ha.rst - os-odl_l2-bgpvpn-ha.rst - os-odl_l2-sfc-ha.rst - os-nosdn-kvm-ha.rst - os-onos-nofeature-ha.rst - os-onos-sfc-ha.rst + tc002-network-latency.rst + tc010-memory-read-latency.rst + tc011-packet-delay-variation.rst + tc012-memory-read-write-bandwidth.rst + tc014-cpu-processing-speed.rst + tc069-memory-write-bandwidth.rst + tc082-context-switches-under-load.rst + tc083-network-throughput-between-vm.rst Test results of executed tests are avilable in Dashboard_ and logs in Jenkins_. diff --git a/docs/release/results/tc002-network-latency.rst b/docs/release/results/tc002-network-latency.rst new file mode 100644 index 000000000..722423473 --- /dev/null +++ b/docs/release/results/tc002-network-latency.rst @@ -0,0 +1,317 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +====================================== +Test results for TC002 network latency +====================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC002 verifies that network latency is within acceptable boundaries when packets travel between hosts located on same or different compute blades. +Ping packets (ICMP protocol's mandatory ECHO_REQUEST datagram) are sent from host VM to target VM(s) to elicit ICMP ECHO_RESPONSE. + +Metric: RTT (Round Trip Time) +Unit: ms + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [0.214], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [0.309], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [0.3145], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [0.3585], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [0.3765], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [0.403], + + "os-odl-sfc-ha:huawei-pod2:compass": [0.413], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [0.494], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [0.5715], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [0.5785], + + "os-odl-sfc-ha:lf-pod1:apex": [0.617], + + "os-odl-nofeature-ha:lf-pod1:apex": [0.62], + + "os-nosdn-bar-noha:lf-pod1:apex": [0.632], + + "os-odl-nofeature-noha:lf-pod1:apex": [0.635], + + "os-odl-bgpvpn-ha:lf-pod1:apex": [0.658], + + "os-odl-sfc-noha:lf-pod1:apex": [0.663], + + "os-nosdn-bar-ha:lf-pod1:apex": [0.668], + + "os-ovn-nofeature-noha:lf-pod1:apex": [0.668], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [0.6815], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [0.7005], + + "os-nosdn-bar-ha:huawei-pod2:compass": [0.778], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [0.7825], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [0.7885], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [0.795], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [0.8045], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [0.8335], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [0.8755], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [0.8855], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [0.8895], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [0.901], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [0.956], + + "os-nosdn-lxd-noha:intel-pod5:joid": [1.131], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [1.173], + + "os-odl-sfc-ha:huawei-virtual8:compass": [1.2015], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [1.204], + + "os-nosdn-lxd-ha:intel-pod5:joid": [1.2245], + + "os-odl-nofeature-ha:lf-pod2:fuel": [1.2285], + + "os-odl-sfc-noha:huawei-virtual4:compass": [1.3055], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [1.309], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [1.313], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [1.319], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [1.3425], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [1.3475], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [1.348], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [1.432], + + "os-odl_l3-nofeature-noha:huawei-virtual9:compass": [1.442], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [1.4505], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [1.497], + + "os-odl-sfc-noha:huawei-virtual3:compass": [1.504], + + "os-odl-nofeature-ha:arm-pod5:fuel": [1.519], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [1.5415], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [1.5785], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [1.604], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [1.61], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [1.633], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [1.6485], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [1.7085], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [1.71], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [1.7955], + + "os-odl-nofeature-ha:arm-pod6:fuel": [1.838], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [1.88], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [1.8975], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [1.923], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [1.944], + + "os-odl-sfc-ha:huawei-virtual3:compass": [1.968], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [1.986], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [2.0415], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [2.071], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [2.0855], + + "os-odl-sfc-ha:huawei-virtual4:compass": [2.1085], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [2.1135], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [2.234], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [2.294], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [2.304], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [2.378], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [2.397], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [2.472], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [2.603], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [2.635], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [2.9055], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [3.1295], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [3.337], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [3.634], + + "os-nosdn-nofeature-noha:ericsson-virtual1:fuel": [3.875], + + "os-odl-nofeature-noha:ericsson-virtual1:fuel": [3.9655], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [3.9795] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc002_scenario.png + :width: 800px + :alt: TC002 influence of scenario + +{ + + "os-odl_l2-moon-ha": [0.3415], + + "os-nosdn-ovs-ha": [0.3625], + + "os-nosdn-ovs_dpdk-noha": [0.378], + + "os-nosdn-ovs_dpdk-ha": [0.5265], + + "os-nosdn-bar-noha": [0.632], + + "os-odl-bgpvpn-ha": [0.658], + + "os-ovn-nofeature-noha": [0.668], + + "os-odl_l3-nofeature-ha": [0.8545], + + "os-nosdn-ovs-noha": [0.8575], + + "os-nosdn-bar-ha": [0.903], + + "os-odl-sfc-ha": [1.127], + + "os-nosdn-lxd-noha": [1.131], + + "os-nosdn-nofeature-ha": [1.152], + + "os-odl_l2-moon-noha": [1.1825], + + "os-nosdn-lxd-ha": [1.2245], + + "os-odl_l3-nofeature-noha": [1.337], + + "os-odl-nofeature-ha": [1.352], + + "os-odl-sfc-noha": [1.4255], + + "os-nosdn-kvm-noha": [1.5045], + + "os-nosdn-openbaton-ha": [1.5665], + + "os-nosdn-nofeature-noha": [1.729], + + "os-nosdn-kvm-ha": [1.7745], + + "os-odl-nofeature-noha": [3.106] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc002_pod.png + :width: 800px + :alt: TC002 influence of the POD + +{ + + "huawei-pod2": [0.3925], + + "lf-pod2": [0.5315], + + "lf-pod1": [0.62], + + "flex-pod2": [0.795], + + "huawei-pod12": [0.87], + + "intel-pod5": [1.25], + + "ericsson-virtual3": [1.2655], + + "ericsson-pod1": [1.372], + + "arm-pod5": [1.518], + + "huawei-virtual4": [1.5355], + + "huawei-virtual3": [1.606], + + "intel-pod18": [1.6575], + + "huawei-virtual8": [1.709], + + "huawei-virtual2": [1.872], + + "arm-pod6": [1.895], + + "huawei-virtual9": [2.0745], + + "huawei-virtual1": [2.495], + + "ericsson-virtual2": [2.7895], + + "ericsson-virtual4": [3.768], + + "ericsson-virtual1": [3.8035] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc010-memory-read-latency.rst b/docs/release/results/tc010-memory-read-latency.rst new file mode 100644 index 000000000..9a296b7a0 --- /dev/null +++ b/docs/release/results/tc010-memory-read-latency.rst @@ -0,0 +1,299 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +========================================== +Test results for TC010 memory read latency +========================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC010 measures the memory read latency for varying memory sizes and strides. +The test results shown below are for memory size of 16MB. + +Metric: Memory read latency +Unit: ns + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [5.3165], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [5.908], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [6.412], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [6.545], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [6.592], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [6.5975], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [6.7675], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [6.7675], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [6.7945], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [6.839], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [6.9695], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [7.123], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [7.289], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [7.4315], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [7.9], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [8.178], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [8.616], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [8.646], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [8.8615], + + "os-odl-sfc-ha:huawei-pod2:compass": [8.87], + + "os-nosdn-bar-ha:huawei-pod2:compass": [8.877], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [8.892], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [8.898], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [8.952], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [8.9745], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [9.0375], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [9.083], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [9.09], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [9.094], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [9.293], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [9.3525], + + "os-odl-sfc-noha:huawei-virtual4:compass": [9.477], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [9.5445], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [9.5575], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [9.6435], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [9.68], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [9.728], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [9.751], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [9.8645], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [9.969], + + "os-odl-sfc-noha:huawei-virtual3:compass": [10.029], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [10.088], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [10.2985], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [10.318], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [10.3215], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [10.617], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [10.762], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [10.7715], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [10.866], + + "os-odl-sfc-ha:huawei-virtual3:compass": [10.871], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [11.1605], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [11.227], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [11.348], + + "os-odl-sfc-ha:huawei-virtual4:compass": [11.453], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [11.571], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [11.5925], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [11.689], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [11.8695], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [12.199], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [12.433], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [12.713], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [15.328], + + "os-odl-nofeature-ha:lf-pod1:apex": [15.4265], + + "os-odl-nofeature-noha:lf-pod1:apex": [15.428], + + "os-ovn-nofeature-noha:lf-pod1:apex": [15.545], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [15.55], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [15.6395], + + "os-odl-sfc-noha:lf-pod1:apex": [15.696], + + "os-odl-sfc-ha:lf-pod1:apex": [15.774], + + "os-nosdn-bar-ha:lf-pod1:apex": [16.6455], + + "os-nosdn-bar-noha:lf-pod1:apex": [16.861], + + "os-odl-nofeature-ha:arm-pod5:fuel": [18.071], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [18.116], + + "os-odl-nofeature-ha:lf-pod2:fuel": [18.8365], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [18.927], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [29.557], + + "os-odl-sfc-ha:huawei-virtual8:compass": [32.492], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [37.623], + + "os-odl-nofeature-ha:arm-pod6:fuel": [41.345], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [42.3795], + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc010_scenario.png + :width: 800px + :alt: TC010 influence of scenario + +{ + + "os-nosdn-ovs-noha": [7.9], + + "os-nosdn-ovs_dpdk-noha": [8.641], + + "os-nosdn-ovs_dpdk-ha": [8.6815], + + "os-nosdn-openbaton-ha": [8.882], + + "os-odl_l2-moon-ha": [8.948], + + "os-odl_l3-nofeature-ha": [8.992], + + "os-nosdn-nofeature-ha": [9.118], + + "os-nosdn-nofeature-noha": [9.174], + + "os-odl_l2-moon-noha": [9.312], + + "os-odl_l3-nofeature-noha": [9.5535], + + "os-odl-nofeature-noha": [9.673], + + "os-odl-sfc-noha": [9.8385], + + "os-odl-sfc-ha": [9.98], + + "os-nosdn-kvm-noha": [10.088], + + "os-nosdn-kvm-ha": [11.1705], + + "os-nosdn-bar-ha": [12.1395], + + "os-nosdn-ovs-ha": [15.3195], + + "os-ovn-nofeature-noha": [15.545], + + "os-odl-nofeature-ha": [16.301], + + "os-nosdn-bar-noha": [16.861] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc010_pod.png + :width: 800px + :alt: TC010 influence of the POD + +{ + + "ericsson-pod1": [5.7785], + + "flex-pod2": [5.908], + + "ericsson-virtual1": [6.412], + + "intel-pod18": [6.5905], + + "intel-pod5": [6.6975], + + "ericsson-virtual4": [7.183], + + "ericsson-virtual2": [8.4985], + + "huawei-pod2": [8.877], + + "huawei-pod12": [9.091], + + "ericsson-virtual3": [9.719], + + "huawei-virtual4": [10.1195], + + "huawei-virtual3": [10.19], + + "huawei-virtual1": [10.3045], + + "huawei-virtual9": [10.318], + + "huawei-virtual2": [11.274], + + "lf-pod1": [15.7025], + + "lf-pod2": [15.8495], + + "arm-pod5": [18.092], + + "huawei-virtual8": [33.999], + + "arm-pod6": [41.5605] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc011-packet-delay-variation.rst b/docs/release/results/tc011-packet-delay-variation.rst new file mode 100644 index 000000000..b07ea8980 --- /dev/null +++ b/docs/release/results/tc011-packet-delay-variation.rst @@ -0,0 +1,262 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +============================================= +Test results for TC011 packet delay variation +============================================= + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC011 measures the packet delay variation sending the packets from one VM to the other. + +Metric: packet delay variation (jitter) +Unit: ms + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [2996], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [2996], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [2996], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [2996], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [2997], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [2997], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [2997], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [2997], + + "os-odl-sfc-ha:huawei-virtual4:compass": [2997], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [2997.5], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [2998], + + "os-odl-sfc-ha:huawei-virtual8:compass": [2998], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [2999], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [2999.5], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [3000], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [3001], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [3002], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [3002], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [3002], + + "os-odl-sfc-ha:huawei-virtual3:compass": [3002], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [3003], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [3003.5], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [3004], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [3004], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [3004.5], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [3005], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [3006], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [3006.5], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [3009], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [3010], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [3010], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [3012], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [3017], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [3017], + + "os-odl-sfc-noha:huawei-virtual4:compass": [3017], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [3018], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [3020], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [3021], + + "os-nosdn-bar-ha:huawei-pod2:compass": [3022], + + "os-nosdn-bar-ha:lf-pod1:apex": [3022], + + "os-nosdn-bar-noha:lf-pod1:apex": [3022], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [3022], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [3022], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [3022], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [3022], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [3022], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [3022], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [3022], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [3022], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [3022], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [3022], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [3022], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [3022], + + "os-odl-nofeature-ha:arm-pod5:fuel": [3022], + + "os-odl-sfc-ha:huawei-pod2:compass": [3022], + + "os-odl-sfc-ha:lf-pod1:apex": [3022], + + "os-odl-sfc-noha:huawei-virtual3:compass": [3022], + + "os-odl-sfc-noha:lf-pod1:apex": [3022], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [3022], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [3022], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [3022], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [3022], + + "os-ovn-nofeature-noha:lf-pod1:apex": [3022], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [3023], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [3023], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [3024] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc011_scenario.png + :width: 800px + :alt: TC011 influence of scenario + +{ + + "os-nosdn-ovs_dpdk-noha": [2996], + + "os-odl_l3-nofeature-noha": [2997], + + "os-nosdn-kvm-noha": [2999], + + "os-nosdn-ovs_dpdk-ha": [3002], + + "os-nosdn-kvm-ha": [3014.5], + + "os-odl-sfc-noha": [3018], + + "os-nosdn-nofeature-noha": [3020], + + "os-nosdn-openbaton-ha": [3020], + + "os-nosdn-bar-ha": [3022], + + "os-nosdn-bar-noha": [3022], + + "os-nosdn-nofeature-ha": [3022], + + "os-odl-nofeature-ha": [3022], + + "os-odl-sfc-ha": [3022], + + "os-odl_l2-moon-ha": [3022], + + "os-odl_l2-moon-noha": [3022], + + "os-odl_l3-nofeature-ha": [3022], + + "os-ovn-nofeature-noha": [3022] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc011_pod.png + :width: 800px + :alt: TC011 influence of the POD + +{ + + "huawei-virtual2": [2997], + + "flex-pod2": [2997.5], + + "huawei-virtual3": [2998], + + "huawei-virtual9": [3000], + + "huawei-virtual8": [3001], + + "huawei-virtual4": [3002], + + "ericsson-virtual3": [3006], + + "huawei-virtual1": [3007], + + "ericsson-virtual2": [3009], + + "intel-pod18": [3010], + + "ericsson-virtual4": [3017], + + "lf-pod2": [3021], + + "arm-pod5": [3022], + + "arm-pod6": [3022], + + "ericsson-pod1": [3022], + + "huawei-pod12": [3022], + + "huawei-pod2": [3022], + + "intel-pod5": [3022], + + "lf-pod1": [3022] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc012-memory-read-write-bandwidth.rst b/docs/release/results/tc012-memory-read-write-bandwidth.rst new file mode 100644 index 000000000..c28eb1f3c --- /dev/null +++ b/docs/release/results/tc012-memory-read-write-bandwidth.rst @@ -0,0 +1,299 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +================================================== +Test results for TC012 memory read/write bandwidth +================================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC012 measures the rate at which data can be read from and written to the memory (this includes all levels of memory). +In this test case, the bandwidth to read data from memory and then write data to the same memory location are measured. + +Metric: memory bandwidth +Unit: MBps + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-nosdn-nofeature-ha:lf-pod1:apex": [23126.325], + + "os-odl-nofeature-noha:lf-pod1:apex": [23123.975], + + "os-odl-nofeature-ha:lf-pod1:apex": [23068.965], + + "os-odl-nofeature-ha:lf-pod2:fuel": [22972.46], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [22912.015], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [22911.35], + + "os-ovn-nofeature-noha:lf-pod1:apex": [22900.93], + + "os-nosdn-bar-ha:lf-pod1:apex": [22767.56], + + "os-nosdn-bar-noha:lf-pod1:apex": [22721.83], + + "os-odl-sfc-noha:lf-pod1:apex": [22511.565], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [22071.235], + + "os-odl-sfc-ha:lf-pod1:apex": [21646.415], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [20229.99], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [17491.18], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [17474.965], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [17141.375], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [17134.99], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [17124.27], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [16599.325], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [16309.13], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [16137.48], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [15960.76], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [15685.505], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [15536.65], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [15431.795], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [15129.27], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [15125.51], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [15030.65], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [15019.89], + + "os-odl-sfc-ha:huawei-pod2:compass": [15005.11], + + "os-nosdn-bar-ha:huawei-pod2:compass": [14975.645], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [14968.97], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [14968.97], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [14741.425], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [14714.28], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [14674.38], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [14664.12], + + "os-odl-sfc-noha:huawei-virtual4:compass": [14587.62], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [14539.94], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [14534.54], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [14511.925], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [14496.875], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [14378.87], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [14366.69], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [14356.695], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [14341.605], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [14327.78], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [14313.81], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [14284.365], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [14157.99], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [14144.86], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [14138.9], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [14117.7], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [14097.255], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [14085.675], + + "os-odl-sfc-noha:huawei-virtual3:compass": [14071.605], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [14059.51], + + "os-odl-sfc-ha:huawei-virtual4:compass": [14057.155], + + "os-odl-sfc-ha:huawei-virtual3:compass": [14051.945], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [14020.74], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [14017.915], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [13954.27], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [13915.87], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [13874.59], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [13812.215], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [13777.59], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [13765.36], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [13559.905], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [13477.52], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [13255.17], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [13189.64], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [12718.545], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [12559.445], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [12409.66], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [8832.515], + + "os-odl-sfc-ha:huawei-virtual8:compass": [8823.955], + + "os-odl-nofeature-ha:arm-pod5:fuel": [4398.08], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [4375.75], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [4260.77], + + "os-odl-nofeature-ha:arm-pod6:fuel": [4259.62] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc012_scenario.png + :width: 800px + :alt: TC012 influence of scenario + +{ + + "os-ovn-nofeature-noha": [22900.93], + + "os-nosdn-bar-noha": [22721.83], + + "os-nosdn-ovs-ha": [22063.67], + + "os-odl-nofeature-ha": [17146.05], + + "os-odl-nofeature-noha": [16017.41], + + "os-nosdn-ovs-noha": [16005.74], + + "os-nosdn-nofeature-noha": [15290.94], + + "os-nosdn-nofeature-ha": [15038.74], + + "os-nosdn-bar-ha": [14972.975], + + "os-odl_l2-moon-ha": [14956.955], + + "os-odl_l3-nofeature-ha": [14839.21], + + "os-odl-sfc-ha": [14823.48], + + "os-nosdn-ovs_dpdk-ha": [14822.17], + + "os-nosdn-ovs_dpdk-noha": [14725.9], + + "os-odl_l2-moon-noha": [14665.4], + + "os-odl_l3-nofeature-noha": [14483.09], + + "os-odl-sfc-noha": [14373.21], + + "os-nosdn-openbaton-ha": [14135.325], + + "os-nosdn-kvm-noha": [14020.26], + + "os-nosdn-kvm-ha": [13996.02] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc012_pod.png + :width: 800px + :alt: TC012 influence of the POD + +{ + + "lf-pod1": [22912.39], + + "lf-pod2": [22637.67], + + "flex-pod2": [20229.99], + + "ericsson-virtual1": [17474.965], + + "ericsson-pod1": [17127.38], + + "ericsson-virtual4": [16219.97], + + "ericsson-virtual2": [15652.28], + + "ericsson-virtual3": [15551.26], + + "huawei-pod2": [15017.2], + + "huawei-virtual4": [14266.34], + + "huawei-virtual1": [14233.035], + + "huawei-virtual3": [14227.63], + + "huawei-pod12": [14147.245], + + "intel-pod18": [14058.33], + + "huawei-virtual2": [13862.85], + + "intel-pod5": [13280.32], + + "huawei-virtual9": [12559.445], + + "huawei-virtual8": [8998.02], + + "arm-pod5": [4388.875], + + "arm-pod6": [4260.2] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc014-cpu-processing-speed.rst b/docs/release/results/tc014-cpu-processing-speed.rst new file mode 100644 index 000000000..34d4ad0f9 --- /dev/null +++ b/docs/release/results/tc014-cpu-processing-speed.rst @@ -0,0 +1,298 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +=========================================== +Test results for TC014 cpu processing speed +=========================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC014 measures score of single cpu running using UnixBench. + +Metric: score of single CPU running +Unit: N/A + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-odl-sfc-noha:lf-pod1:apex": [3735.2], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [3725.5], + + "os-odl-nofeature-ha:lf-pod2:fuel": [3711], + + "os-odl-nofeature-ha:lf-pod1:apex": [3708.4], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [3705.7], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [3704], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [3703.2], + + "os-odl-nofeature-noha:lf-pod1:apex": [3702.8], + + "os-odl-sfc-ha:lf-pod1:apex": [3698.7], + + "os-ovn-nofeature-noha:lf-pod1:apex": [3654.8], + + "os-nosdn-bar-ha:lf-pod1:apex": [3635.55], + + "os-nosdn-bar-noha:lf-pod1:apex": [3633.2], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [3450.3], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [3406.4], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [3360.4], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [3340.65], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [3208.6], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [3134.8], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [3056.2], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [2988.9], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [2773.7], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [2645.85], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [2625.3], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [2601.3], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [2590.4], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [2570.2], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [2558.8], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [2556.5], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [2554.6], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [2536.75], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [2533.55], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [2531.85], + + "os-odl-sfc-ha:huawei-pod2:compass": [2531.7], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [2531.2], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [2531], + + "os-nosdn-bar-ha:huawei-pod2:compass": [2529.6], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [2520.5], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [2481.15], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [2474], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [2472.6], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [2471], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [2470.6], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [2464.15], + + "os-odl-sfc-noha:huawei-virtual4:compass": [2455.9], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [2455.3], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [2446.85], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [2444.75], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [2430.9], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [2421.3], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [2415.7], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [2399.4], + + "os-odl-sfc-ha:huawei-virtual3:compass": [2391.85], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [2391.45], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [2380.7], + + "os-odl-sfc-ha:huawei-virtual4:compass": [2379.6], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [2371.9], + + "os-odl-sfc-noha:huawei-virtual3:compass": [2364.6], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [2363.4], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [2362], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [2358.5], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [2358.45], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [2336], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [2326.6], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [2324.95], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [2320.2], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [2318.5], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [2312.8], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [2311.7], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [2301.15], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [2297.7], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [2232.8], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [2232.1], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [2230], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [2154], + + "os-odl-sfc-ha:huawei-virtual8:compass": [2150.1], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [2004.3], + + "os-odl-nofeature-ha:arm-pod5:fuel": [1754.5], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [1754.15], + + "os-odl-nofeature-ha:arm-pod6:fuel": [716.15], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [716.05] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc014_scenario.png + :width: 800px + :alt: TC014 influence of scenario + +{ + + "os-nosdn-ovs-ha": [3725.5], + + "os-ovn-nofeature-noha": [3654.8], + + "os-nosdn-bar-noha": [3633.2], + + "os-odl-nofeature-ha": [3407.8], + + "os-nosdn-ovs-noha": [2583.2], + + "os-odl-nofeature-noha": [2578.9], + + "os-nosdn-nofeature-noha": [2553.2], + + "os-nosdn-nofeature-ha": [2532.8], + + "os-odl_l2-moon-ha": [2530.5], + + "os-nosdn-bar-ha": [2527], + + "os-odl_l3-nofeature-ha": [2501.5], + + "os-nosdn-ovs_dpdk-noha": [2473.65], + + "os-odl-sfc-ha": [2472.9], + + "os-odl_l2-moon-noha": [2470.8], + + "os-nosdn-ovs_dpdk-ha": [2461.9], + + "os-odl_l3-nofeature-noha": [2442.8], + + "os-nosdn-kvm-noha": [2392.9], + + "os-odl-sfc-noha": [2370.5], + + "os-nosdn-kvm-ha": [2358.5], + + "os-nosdn-openbaton-ha": [2231.8] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc014_pod.png + :width: 800px + :alt: TC014 influence of the POD + +{ + + "lf-pod2": [3723.95], + + "lf-pod1": [3669], + + "intel-pod5": [3388.6], + + "intel-pod18": [3298.4], + + "flex-pod2": [3208.6], + + "ericsson-virtual1": [2988.9], + + "ericsson-pod1": [2669.1], + + "ericsson-virtual4": [2598.5], + + "ericsson-virtual3": [2553.15], + + "huawei-pod2": [2531.2], + + "ericsson-virtual2": [2526.9], + + "huawei-virtual4": [2407.4], + + "huawei-virtual3": [2374.6], + + "huawei-virtual2": [2326.4], + + "huawei-virtual9": [2324.95], + + "huawei-virtual1": [2302.6], + + "huawei-pod12": [2232.2], + + "huawei-virtual8": [2085.3], + + "arm-pod5": [1754.4], + + "arm-pod6": [716.15] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc069-memory-write-bandwidth.rst b/docs/release/results/tc069-memory-write-bandwidth.rst new file mode 100644 index 000000000..06e2ec922 --- /dev/null +++ b/docs/release/results/tc069-memory-write-bandwidth.rst @@ -0,0 +1,300 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +============================================= +Test results for TC069 memory write bandwidth +============================================= + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC069 measures the maximum possible cache and memory performance while reading and writing certain +blocks of data (starting from 1Kb and further in power of 2) continuously through ALU and FPU +respectively. Measure different aspects of memory performance via synthetic simulations. +Each simulation consists of four performances (Copy, Scale, Add, Triad). +The test results shown below are for writing 32MB integer block size. + +Metric: memory write bandwidth +Unit: MBps + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-nosdn-nofeature-noha:intel-pod18:joid": [20113.395], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [19183.58], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [17851.35], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [16312.37], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [15633.245], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [13332.065], + + "os-odl-nofeature-ha:arm-pod6:fuel": [13327.02], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [9462.74], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [9384.585], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [9235.98], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [9213.6], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [9152.18], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [9079.45], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [9071.13], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [9068.06], + + "os-odl-sfc-ha:huawei-pod2:compass": [9031.24], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [9019.53], + + "os-nosdn-bar-ha:huawei-pod2:compass": [8977.3], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [8960.635], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [8825.805], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [8282.75], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [8116.33], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [8083.97], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [8083.52], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [7799.145], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [7776.12], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [7680.37], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [7615.97], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [7612.62], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [7518.62], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [7489.67], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [7478.57], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [7465.82], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [7443.16], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [7442.855], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [7440.65], + + "os-odl-sfc-noha:huawei-virtual4:compass": [7401.16], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [7389.505], + + "os-odl-nofeature-ha:arm-pod5:fuel": [7385.76], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [7382.345], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [7286.385], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [7272.06], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [7261.73], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [7253.64], + + "os-odl-sfc-noha:huawei-virtual3:compass": [7247.89], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [7214.01], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [7207.39], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [7205.565], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [7201.005], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [7132.835], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [7117.05], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [7064.18], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [6997.295], + + "os-odl-nofeature-ha:lf-pod1:apex": [6992.21], + + "os-odl-sfc-ha:huawei-virtual4:compass": [6975.63], + + "os-odl-nofeature-noha:lf-pod1:apex": [6972.63], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [6955], + + "os-ovn-nofeature-noha:lf-pod1:apex": [6954.5], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [6953.35], + + "os-odl-sfc-noha:lf-pod1:apex": [6951.89], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [6932.29], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [6929.54], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [6921.6], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [6913.355], + + "os-odl-nofeature-ha:lf-pod2:fuel": [6848.58], + + "os-odl-sfc-ha:lf-pod1:apex": [6818.74], + + "os-nosdn-bar-noha:lf-pod1:apex": [6812.16], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [6808.18], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [6807.565], + + "os-nosdn-bar-ha:lf-pod1:apex": [6774.76], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [6759.4], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [6756.9], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [6543.46], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [6504.34], + + "os-odl-sfc-ha:huawei-virtual3:compass": [6481.005], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [6461.5], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [6152.375], + + "os-odl-sfc-ha:huawei-virtual8:compass": [5941.7], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [4564.515] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc069_scenario.png + :width: 800px + :alt: TC069 influence of scenario + +{ + + "os-nosdn-openbaton-ha": [9187.16], + + "os-odl_l2-moon-ha": [9010.57], + + "os-nosdn-nofeature-ha": [8886.75], + + "os-odl_l3-nofeature-ha": [8779.67], + + "os-odl_l2-moon-noha": [8114.995], + + "os-nosdn-ovs_dpdk-ha": [7864.07], + + "os-odl_l3-nofeature-noha": [7632.11], + + "os-odl-sfc-ha": [7624.67], + + "os-nosdn-nofeature-noha": [7470.66], + + "os-odl-nofeature-ha": [7372.23], + + "os-nosdn-ovs_dpdk-noha": [7311.54], + + "os-odl-sfc-noha": [7300.56], + + "os-nosdn-ovs-noha": [7280.005], + + "os-odl-nofeature-noha": [7162.67], + + "os-nosdn-kvm-ha": [7130.775], + + "os-nosdn-kvm-noha": [7041.13], + + "os-ovn-nofeature-noha": [6954.5], + + "os-nosdn-ovs-ha": [6913.355], + + "os-nosdn-bar-ha": [6829.17], + + "os-nosdn-bar-noha": [6812.16] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc069_pod.png + :width: 800px + :alt: TC069 influence of the POD + +{ + + "intel-pod18": [18871.79], + + "intel-pod5": [16055.79], + + "arm-pod6": [13327.02], + + "flex-pod2": [9384.585], + + "ericsson-pod1": [9331.535], + + "huawei-pod12": [9164.88], + + "huawei-pod2": [9026.52], + + "huawei-virtual9": [8825.805], + + "ericsson-virtual1": [7615.97], + + "ericsson-virtual4": [7539.23], + + "arm-pod5": [7403.38], + + "huawei-virtual3": [7247.89], + + "huawei-virtual2": [7205.35], + + "huawei-virtual1": [7196.405], + + "ericsson-virtual3": [7173.72], + + "huawei-virtual4": [7131.47], + + "ericsson-virtual2": [7129.08], + + "lf-pod1": [6928.18], + + "lf-pod2": [6875.88], + + "huawei-virtual8": [5729.705] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc082-context-switches-under-load.rst b/docs/release/results/tc082-context-switches-under-load.rst new file mode 100644 index 000000000..d8a9f5493 --- /dev/null +++ b/docs/release/results/tc082-context-switches-under-load.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +================================================== +Test results for TC082 context switches under load +================================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC082 measures various software performance events using perf. +The test results shown below are for context-switches. + +Metric: context switches +Unit: N/A + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [316], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [340], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [357.5], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [384], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [394.5], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [435], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [476], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [518], + + "os-odl-nofeature-ha:arm-pod5:fuel": [863], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [871], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [1002], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [1174], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [1239], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [1430], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [1489], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [1883.5] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc082_scenario.png + :width: 800px + :alt: TC082 influence of scenario + +the influence of the scenario + +{ + + "os-nosdn-nofeature-ha": [505], + + "os-odl-nofeature-ha": [863] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc082_pod.png + :width: 800px + :alt: TC082 influence of the POD + +the influence of the POD + +{ + + "huawei-pod12": [316], + + "intel-pod18": [340], + + "intel-pod5": [357.5], + + "ericsson-pod1": [384], + + "lf-pod2": [394.5], + + "lf-pod1": [435], + + "flex-pod2": [476], + + "huawei-pod2": [518], + + "arm-pod5": [869.5], + + "huawei-virtual9": [1002], + + "huawei-virtual4": [1174], + + "huawei-virtual3": [1239], + + "huawei-virtual2": [1430], + + "huawei-virtual1": [1489], + + "arm-pod6": [1883.5] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc083-network-throughput-between-vm.rst b/docs/release/results/tc083-network-throughput-between-vm.rst new file mode 100644 index 000000000..f846571a5 --- /dev/null +++ b/docs/release/results/tc083-network-throughput-between-vm.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +===================================================== +Test results for TC083 network throughput between VMs +===================================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC083 measures network latency and throughput between VMs using netperf. +The test results shown below are for UDP throughout. + +Metric: UDP stream throughput +Unit: 10^6bits/s + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-nosdn-nofeature-ha:lf-pod1:apex": [2204.42], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [1835.55], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [1676.705], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [1612.555], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [1370.23], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [1300.12], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [1070.455], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [1004.32], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [753.46], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [735.07], + + "os-odl-nofeature-ha:arm-pod5:fuel": [531.63], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [493.985], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [448.82], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [193.43], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [189.99], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [80.15] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc083_scenario.png + :width: 800px + :alt: TC083 influence of scenario + +the influence of the scenario + +{ + + "os-nosdn-nofeature-ha": [1109.12], + + "os-odl-nofeature-ha": [531.63] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc083_pod.png + :width: 800px + :alt: TC083 influence of the POD + +the influence of the POD + +{ + + "lf-pod1": [2204.42], + + "intel-pod18": [1835.55], + + "lf-pod2": [1676.705], + + "intel-pod5": [1612.555], + + "flex-pod2": [1370.23], + + "huawei-pod12": [1300.12], + + "huawei-pod2": [1070.455], + + "ericsson-pod1": [1004.32], + + "huawei-virtual9": [753.46], + + "huawei-virtual4": [735.07], + + "huawei-virtual3": [493.985], + + "arm-pod5": [451.38], + + "arm-pod6": [193.43], + + "huawei-virtual1": [189.99], + + "huawei-virtual2": [80.15] + +} + + +Fraser release +-------------- |
