diff options
147 files changed, 4695 insertions, 3829 deletions
@@ -11,7 +11,6 @@ IRC: #opnfv-yardstick Repository: yardstick Committers: -jorgen.w.karlsson@ericsson.com jean.gaoliang@huawei.com lvjing5@huawei.com wu.zhihui1@zte.com.cn @@ -34,10 +34,6 @@ repositories: - 'yardstick' committers: - <<: *opnfv_yardstick_ptl - - name: 'Jörgen Karlsson' - email: 'jorgen.w.karlsson@ericsson.com' - company: 'ericsson.com' - id: 'jnon' - name: 'Kubi' email: 'jean.gaoliang@huawei.com' company: 'huawei.com' diff --git a/ansible/install.yaml b/ansible/install.yaml index afffbede2..c446b91f7 100644 --- a/ansible/install.yaml +++ b/ansible/install.yaml @@ -38,5 +38,7 @@ - service: name: nginx state: restarted + when: installation_mode != inst_mode_container - shell: uwsgi -i /etc/yardstick/yardstick.ini + when: installation_mode != inst_mode_container diff --git a/ansible/install_dependencies.yml b/ansible/install_dependencies.yml deleted file mode 100644 index 1c7d20170..000000000 --- a/ansible/install_dependencies.yml +++ /dev/null @@ -1,19 +0,0 @@ -# Copyright (c) 2017 Intel Corporation. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. ---- -- name: install yardstick dependencies - hosts: all - - roles: - - install_dependencies diff --git a/ansible/multi_port_baremetal_ixia_correlated_test.yaml b/ansible/multi_port_baremetal_ixia_correlated_test.yaml index ba92b5cd3..0d223181d 100644 --- a/ansible/multi_port_baremetal_ixia_correlated_test.yaml +++ b/ansible/multi_port_baremetal_ixia_correlated_test.yaml @@ -42,7 +42,6 @@ lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/results" version: "8.01.106.3" pcis: diff --git a/ansible/multi_port_baremetal_ixia_test.yaml b/ansible/multi_port_baremetal_ixia_test.yaml index 52bc40b43..d2dfaa3c4 100644 --- a/ansible/multi_port_baremetal_ixia_test.yaml +++ b/ansible/multi_port_baremetal_ixia_test.yaml @@ -42,7 +42,6 @@ lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/results" version: "8.01.106.3" pcis: diff --git a/ansible/nsb_setup.yml b/ansible/nsb_setup.yml index 98a59f984..fcde1d1b2 100644 --- a/ansible/nsb_setup.yml +++ b/ansible/nsb_setup.yml @@ -22,7 +22,7 @@ environment: "{{ proxy_env }}" roles: - - install_dependencies + - install_dependencies_jumphost - docker - name: "handle all openstack stuff when: openrc_file is defined" @@ -37,7 +37,7 @@ name: yardstick pull: yes recreate: yes - image: opnfv/yardstick:latest + image: "{{ yardstick_docker_image|default('opnfv/yardstick:latest') }}" state: started restart_policy: always privileged: yes diff --git a/ansible/roles/add_repos_jumphost/tasks/Debian.yml b/ansible/roles/add_repos_jumphost/tasks/Debian.yml index 0b67c6691..626f0b037 100644 --- a/ansible/roles/add_repos_jumphost/tasks/Debian.yml +++ b/ansible/roles/add_repos_jumphost/tasks/Debian.yml @@ -37,8 +37,7 @@ replace: "# deb-src " - name: Add extra architecture - apt: - dpkg_options: "add-architecture {{ extra_arch }}" + command: "dpkg --add-architecture {{ extra_arch }}" - name: Define the default release version copy: diff --git a/ansible/standalone_ovs_scale_out_ixia_correlated_test.yaml b/ansible/standalone_ovs_scale_out_ixia_correlated_test.yaml index 516676576..b54ea9b57 100644 --- a/ansible/standalone_ovs_scale_out_ixia_correlated_test.yaml +++ b/ansible/standalone_ovs_scale_out_ixia_correlated_test.yaml @@ -51,13 +51,12 @@ user: "" password: "" key_filename: ~ - tg_config: + tg_config: ixchassis: "1.1.1.127" #ixia chassis ip tcl_port: "8009" # tcl server port lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/results" version: "8.01.106.3" pcis: diff --git a/ansible/standalone_ovs_scale_out_ixia_test.yaml b/ansible/standalone_ovs_scale_out_ixia_test.yaml index ff665377f..cae373432 100644 --- a/ansible/standalone_ovs_scale_out_ixia_test.yaml +++ b/ansible/standalone_ovs_scale_out_ixia_test.yaml @@ -60,7 +60,6 @@ lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/results" version: "8.01.106.3" pcis: diff --git a/ansible/standalone_sriov_scale_out_ixia_correlated_test.yaml b/ansible/standalone_sriov_scale_out_ixia_correlated_test.yaml index 45a4a498b..0e3a0af55 100644 --- a/ansible/standalone_sriov_scale_out_ixia_correlated_test.yaml +++ b/ansible/standalone_sriov_scale_out_ixia_correlated_test.yaml @@ -43,13 +43,12 @@ user: "" password: "" key_filename: ~ - tg_config: + tg_config: ixchassis: "1.1.1.127" #ixia chassis ip tcl_port: "8009" # tcl server port lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/results" version: "8.01.106.3" pcis: diff --git a/ansible/standalone_sriov_scale_out_ixia_test.yaml b/ansible/standalone_sriov_scale_out_ixia_test.yaml index 659dbef07..8fb09d9b9 100644 --- a/ansible/standalone_sriov_scale_out_ixia_test.yaml +++ b/ansible/standalone_sriov_scale_out_ixia_test.yaml @@ -49,7 +49,6 @@ lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/results" version: "8.01.106.3" pcis: diff --git a/docker/Dockerfile b/docker/Dockerfile index fed9f9bd0..62ea0d037 100644 --- a/docker/Dockerfile +++ b/docker/Dockerfile @@ -31,13 +31,16 @@ RUN pip install appdirs==1.4.0 pyopenssl==17.5.0 python-openstackclient==3.11.0 RUN mkdir -p ${REPOS_DIR} RUN git config --global http.sslVerify false -##RUN git clone --depth 1 -b $BRANCH https://gerrit.opnfv.org/gerrit/yardstick ${YARDSTICK_REPO_DIR} -RUN mkdir ${YARDSTICK_REPO_DIR} -COPY ./ ${YARDSTICK_REPO_DIR} +#For developers: To test your changes you must comment out the git clone for ${YARDSTICK_REPO_DIR}. +#You must also uncomment the RUN and COPY commands below. +#You must run docker build from your yardstick directory on the host. +RUN git clone --depth 1 -b $BRANCH https://gerrit.opnfv.org/gerrit/yardstick ${YARDSTICK_REPO_DIR} +#RUN mkdir ${YARDSTICK_REPO_DIR} +#COPY ./ ${YARDSTICK_REPO_DIR} RUN git clone --depth 1 https://gerrit.opnfv.org/gerrit/releng ${RELENG_REPO_DIR} RUN git clone --depth 1 -b $BRANCH https://gerrit.opnfv.org/gerrit/storperf ${STORPERF_REPO_DIR} -RUN ansible-playbook -vvv -e INSTALLATION_MODE="container" ${YARDSTICK_REPO_DIR}/ansible/install.yaml +RUN ansible-playbook -c local -vvv -e INSTALLATION_MODE="container" ${YARDSTICK_REPO_DIR}/ansible/install.yaml RUN ${YARDSTICK_REPO_DIR}/docker/supervisor.sh @@ -48,10 +51,10 @@ EXPOSE 5000 5672 ADD http://download.cirros-cloud.net/0.3.5/cirros-0.3.5-x86_64-disk.img ${IMAGE_DIR} ADD http://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img ${IMAGE_DIR} -COPY ./docker/exec_tests.sh /usr/local/bin/ +COPY ./exec_tests.sh /usr/local/bin/ -ENV NSB_DIR="/opt/nsb_bin" \ - PYTHONPATH="${PYTHONPATH}:${NSB_DIR}/trex_client:${NSB_DIR}/trex_client/stl" +ENV NSB_DIR="/opt/nsb_bin" +ENV PYTHONPATH="${PYTHONPATH}:${NSB_DIR}/trex_client:${NSB_DIR}/trex_client/stl" WORKDIR ${REPOS_DIR} CMD ["/usr/bin/supervisord"] diff --git a/docker/Dockerfile.aarch64.patch b/docker/Dockerfile.aarch64.patch index e8dbea288..6c7381284 100644 --- a/docker/Dockerfile.aarch64.patch +++ b/docker/Dockerfile.aarch64.patch @@ -1,24 +1,16 @@ -From: Cristina Pauna <cristina.pauna@enea.com> -Date: Thu, 11 Jan 2018 19:06:26 +0200 -Subject: [PATCH] Patch for Yardstick AARCH64 Docker file +From: ting wu <ting.wu@enea.com> +Date: Tue, 8 May 2018 14:02:52 +0200 +Subject: [PATCH][PATCH] Patch for Yardstick AARCH64 Docker file -Signed-off-by: Cristina Pauna <cristina.pauna@enea.com> -Signed-off-by: Alexandru Nemes <alexandru.nemes@enea.com> +Signed-off-by: ting wu <ting.wu@enea.com> --- - docker/Dockerfile | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) + docker/Dockerfile | 11 ++++++----- + 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/docker/Dockerfile b/docker/Dockerfile -index 2ee5b4c..23e5ea5 100644 +index 62ea0d0..f2f41771 100644 --- a/docker/Dockerfile +++ b/docker/Dockerfile -@@ -1,5 +1,5 @@ - ############################################################################## --# Copyright (c) 2015 Ericsson AB and others. -+# Copyright (c) 2017 Enea AB and others. - # - # All rights reserved. This program and the accompanying materials - # are made available under the terms of the Apache License, Version 2.0 @@ -7,9 +7,9 @@ # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## @@ -31,17 +23,17 @@ index 2ee5b4c..23e5ea5 100644 ARG BRANCH=master -@@ -24,7 +24,8 @@ ENV YARDSTICK_REPO_DIR="${REPOS_DIR}/yardstick" \ +@@ -24,7 +24,8 @@ ENV YARDSTICK_REPO_DIR="${REPOS_DIR}/yardstick/" \ RELENG_REPO_DIR="${REPOS_DIR}/releng" \ STORPERF_REPO_DIR="${REPOS_DIR}/storperf" --RUN apt-get update && apt-get install -y git python-setuptools python-pip && apt-get -y autoremove && apt-get clean -+RUN apt-get update && apt-get install -y git python-setuptools python-pip && apt-get -y autoremove && \ +-RUN apt-get update && apt-get install -y git python python-setuptools python-pip && apt-get -y autoremove && apt-get clean ++RUN apt-get update && apt-get install -y git python python-setuptools python-pip && apt-get -y autoremove && \ + apt-get install -y libssl-dev && apt-get -y install libffi-dev && apt-get clean RUN easy_install -U setuptools==30.0.0 - RUN pip install appdirs==1.4.0 pyopenssl==17.5.0 python-openstackclient==3.11.0 python-heatclient==1.11.0 + RUN pip install appdirs==1.4.0 pyopenssl==17.5.0 python-openstackclient==3.11.0 python-heatclient==1.11.0 ansible==2.4.2 -@@ -43,8 +44,8 @@ RUN echo "daemon off;" >> /etc/nginx/nginx.conf +@@ -48,8 +49,8 @@ RUN echo "daemon off;" >> /etc/nginx/nginx.conf # nginx=5000, rabbitmq=5672 EXPOSE 5000 5672 @@ -52,3 +44,4 @@ index 2ee5b4c..23e5ea5 100644 COPY ./exec_tests.sh /usr/local/bin/ + diff --git a/docs/release/results/euphrates_fraser_comparsion.rst b/docs/release/results/euphrates_fraser_comparsion.rst new file mode 100644 index 000000000..222dc8bb0 --- /dev/null +++ b/docs/release/results/euphrates_fraser_comparsion.rst @@ -0,0 +1,8 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + +======================================================= +Test results analysis for Euphrates and Fraser releases +======================================================= + diff --git a/docs/release/results/images/tc002_pod.png b/docs/release/results/images/tc002_pod.png Binary files differnew file mode 100644 index 000000000..7f92c471d --- /dev/null +++ b/docs/release/results/images/tc002_pod.png diff --git a/docs/release/results/images/tc002_scenario.png b/docs/release/results/images/tc002_scenario.png Binary files differnew file mode 100644 index 000000000..0ea1ecec6 --- /dev/null +++ b/docs/release/results/images/tc002_scenario.png diff --git a/docs/release/results/images/tc010_pod.png b/docs/release/results/images/tc010_pod.png Binary files differnew file mode 100644 index 000000000..c7c623481 --- /dev/null +++ b/docs/release/results/images/tc010_pod.png diff --git a/docs/release/results/images/tc010_scenario.png b/docs/release/results/images/tc010_scenario.png Binary files differnew file mode 100644 index 000000000..7c53a5fab --- /dev/null +++ b/docs/release/results/images/tc010_scenario.png diff --git a/docs/release/results/images/tc011_pod.png b/docs/release/results/images/tc011_pod.png Binary files differnew file mode 100644 index 000000000..8fec72f5a --- /dev/null +++ b/docs/release/results/images/tc011_pod.png diff --git a/docs/release/results/images/tc011_scenario.png b/docs/release/results/images/tc011_scenario.png Binary files differnew file mode 100644 index 000000000..2d78ea372 --- /dev/null +++ b/docs/release/results/images/tc011_scenario.png diff --git a/docs/release/results/images/tc012_pod.png b/docs/release/results/images/tc012_pod.png Binary files differnew file mode 100644 index 000000000..0f2a00910 --- /dev/null +++ b/docs/release/results/images/tc012_pod.png diff --git a/docs/release/results/images/tc012_scenario.png b/docs/release/results/images/tc012_scenario.png Binary files differnew file mode 100644 index 000000000..16257988d --- /dev/null +++ b/docs/release/results/images/tc012_scenario.png diff --git a/docs/release/results/images/tc014_pod.png b/docs/release/results/images/tc014_pod.png Binary files differnew file mode 100644 index 000000000..63aead2e8 --- /dev/null +++ b/docs/release/results/images/tc014_pod.png diff --git a/docs/release/results/images/tc014_scenario.png b/docs/release/results/images/tc014_scenario.png Binary files differnew file mode 100644 index 000000000..98f23ba1b --- /dev/null +++ b/docs/release/results/images/tc014_scenario.png diff --git a/docs/release/results/images/tc069_pod.png b/docs/release/results/images/tc069_pod.png Binary files differnew file mode 100644 index 000000000..66b272cb4 --- /dev/null +++ b/docs/release/results/images/tc069_pod.png diff --git a/docs/release/results/images/tc069_scenario.png b/docs/release/results/images/tc069_scenario.png Binary files differnew file mode 100644 index 000000000..caf12f8d5 --- /dev/null +++ b/docs/release/results/images/tc069_scenario.png diff --git a/docs/release/results/images/tc082_pod.png b/docs/release/results/images/tc082_pod.png Binary files differnew file mode 100644 index 000000000..89e01666b --- /dev/null +++ b/docs/release/results/images/tc082_pod.png diff --git a/docs/release/results/images/tc082_scenario.png b/docs/release/results/images/tc082_scenario.png Binary files differnew file mode 100644 index 000000000..637a739c3 --- /dev/null +++ b/docs/release/results/images/tc082_scenario.png diff --git a/docs/release/results/images/tc083_pod.png b/docs/release/results/images/tc083_pod.png Binary files differnew file mode 100644 index 000000000..f874191e4 --- /dev/null +++ b/docs/release/results/images/tc083_pod.png diff --git a/docs/release/results/images/tc083_scenario.png b/docs/release/results/images/tc083_scenario.png Binary files differnew file mode 100644 index 000000000..afd80aa02 --- /dev/null +++ b/docs/release/results/images/tc083_scenario.png diff --git a/docs/release/results/index.rst b/docs/release/results/index.rst index 0560152e0..3ec9e1cff 100644 --- a/docs/release/results/index.rst +++ b/docs/release/results/index.rst @@ -14,3 +14,4 @@ Yardstick test results .. include:: ./overview.rst .. include:: ./results.rst +.. include:: ./euphrates_fraser_comparsion.rst diff --git a/docs/release/results/os-nosdn-kvm-ha.rst b/docs/release/results/os-nosdn-kvm-ha.rst deleted file mode 100644 index a8a56f80e..000000000 --- a/docs/release/results/os-nosdn-kvm-ha.rst +++ /dev/null @@ -1,270 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -================================ -Test Results for os-nosdn-kvm-ha -================================ - -.. toctree:: - :maxdepth: 2 - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test -runs, each run on the Ericsson POD2_ or LF POD2_ between August 24 and 30 in -2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.44 and 0.75 ms. -A few runs start with a 0.65 - 0.68 ms RTT spike (This could be because of -normal ARP handling). One test run has a greater RTT spike of 1.49 ms. -To be able to draw conclusions more runs should be made. SLA set to 10 ms. -The SLA value is used as a reference, it has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 92 and 204 MB/s. Within each test run the results -vary, with a minimum 2 MB/s and maximum 819 MB/s on the totality. Most runs -have a minimum BW of 3 MB/s (one run at 2 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 238 and 819 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 2.07 ns. The variations within each test run are similar, between -1.41 and 3.53 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. The reported packet delay variation varies between 0.0051 and 0.0243 ms, -with an average delay variation between 0.0081 ms and 0.0195 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth result in -approx. 13.6 GB/s. Within each test run the results vary more, with a minimal -BW of 6.09 GB/s and maximum of 16.47 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 2316 and 3619, -one result each date. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -22.6 and 29.1 GB/s. Within each test run the results vary more, with a minimal -BW of 20.0 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - -Conclusions and recommendations -------------------------------- -The pktgen test configuration has a relatively large base effect on RTT in -TC037 compared to TC002, where there is no background load at all. Approx. -15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage -difference in RTT results. -Especially RTT and throughput come out with better results than for instance -the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should -probably be further analyzed and understood. Also of interest could be -to make further analyzes to find patterns and reasons for lost traffic. -Also of interest could be to see if there are continuous variations where -some test cases stand out with better or worse results than the general test -case. - diff --git a/docs/release/results/os-nosdn-nofeature-ha.rst b/docs/release/results/os-nosdn-nofeature-ha.rst deleted file mode 100644 index 9e52731d5..000000000 --- a/docs/release/results/os-nosdn-nofeature-ha.rst +++ /dev/null @@ -1,492 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -====================================== -Test Results for os-nosdn-nofeature-ha -====================================== - -.. toctree:: - :maxdepth: 2 - - -apex -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD1: https://wiki.opnfv.org/pharos?&#community_test_labs - - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test -runs, each run on the LF POD1_ between August 25 and 28 in -2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.74 and 1.08 ms. -A few runs start with a 0.99 - 1.07 ms RTT spike (This could be because of -normal ARP handling). One test run has a greater RTT spike of 1.35 ms. -To be able to draw conclusions more runs should be made. SLA set to 10 ms. -The SLA value is used as a reference, it has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 128 and 136 MB/s. Within each test run the results -vary, with a minimum 5 MB/s and maximum 446 MB/s on the totality. Most runs -have a minimum BW of 5 MB/s (one run at 6 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 416 and 446 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 1.09 ns. The variations within each test run are similar, between -1.0860 and 1.0880 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. The reported packet delay variation varies between 0.0025 and 0.0148 ms, -with an average delay variation between 0.0056 ms and 0.0157 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth result in -approx. 19.70 GB/s. Within each test run the results vary more, with a minimal -BW of 18.16 GB/s and maximum of 20.13 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 3224.4 and 3842.8, -one result each date. The average score on the total is 3659.5. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -22.6 and 29.1 GB/s. Within each test run the results vary more, with a minimal -BW of 20.0 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on LF POD1_ with: -Apex -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - - -Joid -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD5: https://wiki.opnfv.org/pharos?&#community_test_labs - - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD5_ between September 11 and 14 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.59 and 1.70 ms. -Two test runs have reached the same greater RTT spike of 3.06 ms, which are -1.66 and 1.70 ms average, but only one has the lower RTT of 1.35 ms. The other -two runs have no similar spike at all. To be able to draw conclusions more runs -should be made. SLA set to be 10 ms. The SLA value is used as a reference, it -has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput and the -greatest IO read bandwidth of the four runs is 173.3 MB/s. The IO read -bandwidth of the four runs looks similar on different four days, with an -average between 32.7 and 60.4 MB/s. One of the runs has a minimum BW of 429 -KM/s and other has a maximum BW of 173.3 MB/s. The SLA of read bandwidth sets -to be 400 MB/s, which is used as a reference, and it has not been defined by -OPNFV. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is 1.1 ns on average. The -variations within each test run are different, some vary from a large range and -others have a small change. For example, the largest change is on September 14, -the memory read latency of which is ranging from 1.12 ns to 1.22 ns. However, -the results on September 12 change very little, which range from 1.14 ns to -1.17 ns. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the pocket delay variation between 2 VMs on -different blades. The reported pocket delay variations of the four test runs -differ from each other. The results on September 13 within the date look -similar and the values are between 0.0087 and 0.0190 ms, which is 0.0126 ms on -average. However, on the fourth day, the pocket delay variation has a large -wide change within the date, which ranges from 0.0032 ms to 0.0121 ms and has -the minimum average value. The pocket delay variations of other two test runs -look relatively similar, which are 0.0076 ms and 0.0152 ms on average. The SLA -value sets to be 10 ms. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the memory -bandwidth within the second day almost keep stable, which is 11.58 GB/s on -average. And the memory bandwidth of the fourth day look similar as that of the -second day, both of which remain stable. The other two test runs relatively -change from a large wide range, in which the minimum memory bandwidth is 11.22 -GB/s and the maximum bandwidth is 16.65 GB/s with an average bandwidth of about -12.20 GB/s. Here SLA set to be 15 GB/s. The SLA value is used as a reference, -it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to measure processing speed, that is instructions per -second. It can be seen from the dashboard that the processing test results -vary from scores 3272 to 3444, and there is only one result one date. The -overall average score is 3371. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is 119.85, 128.02, 121.40 and -126.08 kpps, of which the result of the second is the highest. The RTT results -of all the test runs keep flat at approx. 37 ms. It is obvious that the PPS -results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 184 kpps and the -minimum throughput is 49 K respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is 38 ms, of which the worest RTT is -93 ms on Sep. 14th. - -CPU load of the four test runs have a large change, since the minimum value and -the peak of CPU load is 0 percent and 51 percent respectively. And the best -result is obtained on Sep. 14th. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 22.3 GB/s to 26.8 GB/s and then to 18.5 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 8 kb and 16 kb, the memory write bandwidth -look similar with a minimal BW of 22.5 GB/s and peak value of 28.7 GB/s. SLA -sets to be 7 GB/s. The SLA value is used as a a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT can reach -more than 80 ms and the average RTT is usually approx. 38 ms. On the whole, the -average RTTs of the four runs keep flat. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 268 MiB on Sep -14, which also has the largest minimum memory. Besides, the rest three test -runs have the similar used memory. On the other hand, the free memory of the -four runs have the same smallest minimum value, that is about 223 MiB, and the -maximum free memory of three runs have the similar result, that is 337 MiB, -except that on Sep. 14th, whose maximum free memory is 254 MiB. On the whole, -all the test runs have similar average free memory. - -Network throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -network throughput of the four test runs seem quite different, ranging from -119.85 kpps to 128.02 kpps. The average number of flows in these tests is -24000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 49.4k and 193.3k with an average packet throughput of approx. -125k. On the whole, the PPS results seem consistent. Within each test run of -the four runs, when number of flows becomes larger, the packet throughput seems -not larger in the meantime. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT can reach -more than 94 ms and the average RTT is usually approx. 35 ms. On the whole, the -average RTTs of the four runs keep flat. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool.The largest -cache size is 212 MiB in the four runs, and the smallest cache size is 75 MiB. -On the whole, the average cache size of the four runs is approx. 208 MiB. -Meanwhile, the tread of the buffer size looks similar with each other. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite different, ranging from 119.85 kpps to 128.02 -kpps. The average number of flows in these tests is 239.7k, and each run has a -minimum number of flows of 2 and a maximum number of flows of 1.001 Mil. At the -same time, the corresponding packet throughput differ between 49.4k and 193.3k -with an average packet throughput of approx. 125k. On the whole, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 32 ms. The PPS results are not as consistent as the RTT results. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second differs from each other, in which the smallest number of -packets transmitted per second is 6 pps on Sep. 12ed and the largest of that is -210.8 kpps. Meanwhile, the largest total number of packets received per second -differs from each other, in which the smallest number of packets received per -second is 2 pps on Sep. 13rd and the largest of that is 250.2 kpps. - -In some test runs when running with less than approx. 90000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 1000000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD5_ with: -Joid -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - - diff --git a/docs/release/results/os-nosdn-nofeature-noha.rst b/docs/release/results/os-nosdn-nofeature-noha.rst deleted file mode 100644 index 8b7c184bb..000000000 --- a/docs/release/results/os-nosdn-nofeature-noha.rst +++ /dev/null @@ -1,259 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -======================================== -Test Results for os-nosdn-nofeature-noha -======================================== - -.. toctree:: - :maxdepth: 2 - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD5: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD5_ between September 12 and 15 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.50 and 1.68 ms. -Only one test run has reached greatest RTT spike of 2.92 ms, which has -the smallest RTT of 1.06 ms. The other three runs have no similar spike at all, -the minimum and average RTTs of which are approx. 1.50 ms and 1.68 ms. SLA set to -be 10 ms. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 177.5 -MB/s. The IO read bandwidth of the four runs looks similar on different four -days, with an average between 46.7 and 62.5 MB/s. One of the runs has a minimum -BW of 680 KM/s and other has a maximum BW of 177.5 MB/s. The SLA of read -bandwidth sets to be 400 MB/s, which is used as a reference, and it has not -been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -test runs all have an approx. 1.55 K/s for IO reading with an minimum value of -less than 60 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.134 ns and 1.227 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 15, the memory read latency of which is ranging -from 1.116 ns to 1.393 ns. However, the results on September 12 change very -little, which mainly keep flat and range from 1.124 ns to 1.55 ns. The SLA sets -to be 30 ns. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the pocket delay variation between 2 VMs on -different blades. The reported pocket delay variations of the four test runs -differ from each other. The results on September 13 within the date look -similar and the values are between 0.0213 and 0.0225 ms, which is 0.0217 ms on -average. However, on the third day, the packet delay variation has a large -wide change within the date, which ranges from 0.008 ms to 0.0225 ms and has -the minimum value. On Sep. 12, the packet delay is quite long, for the value is -between 0.0236 and 0.0287 ms and it also has the maximum packet delay of 0.0287 -ms. The packet delay of the last test run is 0.0151 ms on average. The SLA -value sets to be 10 ms. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the memory -bandwidth of three test runs almost keep stable within each run, which is -11.65, 11.57 and 11.64 GB/s on average. However, the memory read and write -bandwidth on Sep. 14 has a large range, for it ranges from 11.36 GB/s to 16.68 -GB/s. Here SLA set to be 15 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3222 to 3585, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is 124.8, 160.1, 113.8 and -137.3 kpps, of which the result of the second is the highest. The RTT results -of all the test runs keep flat at approx. 37 ms. It is obvious that the PPS -results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 243.1 kpps and the -minimum throughput is 37.6 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is between 32 ms and 41 ms, of which -the worest RTT is 155 ms on Sep. 14th. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and 9 percent respectively. And the best result is obtained on Sep. -15th, with an CPU load of nine percent. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 22.4 GB/s to 26.5 GB/s and then to 18.6 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 8 kb and 16 kb, the memory write bandwidth -look similar with a minimal BW of 22.5 GB/s and peak value of 28.7 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of three test runs look -similar with each other, and Within these test runs, the maximum RTT can reach -95 ms and the average RTT is usually approx. 36 ms. The network latency tested -on Sep. 14 shows that it has a peak latency of 155 ms. But on the whole, the -average RTTs of the four runs keep flat. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 270 MiB on Sep -13, which also has the smallest minimum memory utilization. Besides, the rest -three test runs have the similar used memory with an average memory usage of -264 MiB. On the other hand, the free memory of the four runs have the same -smallest minimum value, that is about 223 MiB, and the maximum free memory of -three runs have the similar result, that is 226 MiB, except that on Sep. 13th, -whose maximum free memory is 273 MiB. On the whole, all the test runs have -similar average free memory. - -Network throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -network throughput of the four test runs seem quite different, ranging from -119.85 kpps to 128.02 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 38k and 243k with an average packet throughput of approx. 134k. -On the whole, the PPS results seem consistent. Within each test run of the four -runs, when number of flows becomes larger, the packet throughput seems not -larger in the meantime. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT can reach -79 ms and the average RTT is usually approx. 35 ms. On the whole, the average -RTTs of the four runs keep flat. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool.The largest -cache size is 214 MiB in the four runs, and the smallest cache size is 100 MiB. -On the whole, the average cache size of the four runs is approx. 210 MiB. -Meanwhile, the tread of the buffer size looks similar with each other. On the -other hand, the mean buffer size of the four runs keep flat, since they have a -minimum value of approx. 7 MiB and a maximum value of 8 MiB, with an average -value of about 8 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite different, ranging from 113.8 kpps to 124.8 kpps. -The average number of flows in these tests is 240k, and each run has a minimum -number of flows of 2 and a maximum number of flows of 1.001 Mil. At the same -time, the corresponding packet throughput differ between 47.6k and 243.1k with -an average packet throughput between 113.8k and 160.1k. Within each test run of -the four runs, when number of flows becomes larger, the packet throughput seems -not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 79 ms with an average leatency of approx. 35 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 113.8 kpps to 124.8 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar on the first three runs with a minimum -number of 10 pps and a maximum number of 97 kpps, except the one on Sep. 15th, -in which the number of packets transmitted per second is 10 pps. Meanwhile, the -largest total number of packets received per second differs from each other, -in which the smallest number of packets received per second is 1 pps and the -largest of that is 276 kpps. - -In some test runs when running with less than approx. 90000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 1000000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD5_ with: -Joid -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. diff --git a/docs/release/results/os-odl_l2-bgpvpn-ha.rst b/docs/release/results/os-odl_l2-bgpvpn-ha.rst deleted file mode 100644 index 2bd6dc35d..000000000 --- a/docs/release/results/os-odl_l2-bgpvpn-ha.rst +++ /dev/null @@ -1,53 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -==================================== -Test Results for os-odl_l2-bgpvpn-ha -==================================== - -.. toctree:: - :maxdepth: 2 - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Ericsson POD2_ between September 7 and 11 in 2016. - -TC043 ------ -The round-trip-time (RTT) between 2 nodes is measured using -ping. Most test run measurements result on average between 0.21 and 0.28 ms. -A few runs start with a 0.32 - 0.35 ms RTT spike (This could be because of -normal ARP handling). To be able to draw conclusions more runs should be made. -SLA set to 10 ms. The SLA value is used as a reference, it has not been defined -by OPNFV. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - diff --git a/docs/release/results/os-odl_l2-nofeature-ha.rst b/docs/release/results/os-odl_l2-nofeature-ha.rst deleted file mode 100644 index ac0c5bb59..000000000 --- a/docs/release/results/os-odl_l2-nofeature-ha.rst +++ /dev/null @@ -1,743 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -======================================= -Test Results for os-odl_l2-nofeature-ha -======================================= - -.. toctree:: - :maxdepth: 2 - - -apex -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD1: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the LF POD1_ between September 14 and 17 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.49 ms and 0.60 ms. -Only one test run has reached greatest RTT spike of 0.93 ms. Meanwhile, the -smallest network latency is 0.33 ms, which is obtained on Sep. 14th. -SLA set to be 10 ms. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 416 -MB/s. The IO read bandwidth of all four runs looks similar, with an average -between 128 and 131 MB/s. One of the runs has a minimum BW of 497 KB/s. The SLA -of read bandwidth sets to be 400 MB/s, which is used as a reference, and it has -not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value at 1k per -second, and meanwhile, the minimum result is only 45 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.0859 ns and -1.0869 ns on average. The variations within each test run are quite different, -some vary from a large range and others have a small change. For example, the -largest change is on September 14th, the memory read latency of which is ranging -from 1.091 ns to 1.086 ns. However. -The SLA sets to be 30 ns. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. On the first two test runs the reported packet delay variation varies between -0.0037 and 0.0740 ms, with an average delay variation between 0.0096 ms and 0.0321. -On the second date the delay variation varies between 0.0063 and 0.0096 ms, with -an average delay variation of 0.0124 - 0.0141 ms. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the trend of -three memory bandwidth almost look similar, which all have a narrow range, and -the average result is 19.88 GB/s. Here SLA set to be 15 GB/s. The SLA value is -used as a reference, it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3754k to 3831k, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is between 307.3 kpps and -447.1 kpps, of which the result of the third run is the highest. The RTT -results of all the test runs keep flat at approx. 15 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 418.1 kpps and the -minimum throughput is 326.5 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is approx. 15 ms. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and nine percent respectively. And the best result is obtained on Sep. -1, with an CPU load of nine percent. But on the whole, the CPU load is very -poor, since the average value is quite small. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 28.2 GB/s to 29.5 GB/s and then to 29.2 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 2 kb or 16 kb, the memory write bandwidth -look similar with a minimal BW of 25.8 GB/s and peak value of 28.3 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 39 ms and the average RTT is usually approx. 15 ms. The network latency -tested on Sep. 1 and Sep. 8 have a peak latency of 39 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 267 MiB for the -four runs. In general, the four test runs have very large memory utilization, -which can reach 257 MiB on average. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 233 MiB to 241 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -305.3 kpps to 447.1 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding average packet -throughput is between 354.4 kpps and 381.8 kpps. In summary, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 42 -ms and the average RTT is usually approx. 15 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 212 MiB, which is same for the four runs, and the smallest cache -size is 75 MiB. On the whole, the average cache size of the four runs look the -same and is between 197 MiB and 211 MiB. Meanwhile, the tread of the buffer -size keep flat, since they have a minimum value of 7 MiB and a maximum value of -8 MiB, with an average value of about 7.9 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs differ from 354.4 kpps to 381.8 kpps. The average number of -flows in these tests is 240k, and each run has a minimum number of flows of 2 -and a maximum number of flows of 1.001 Mil. At the same time, the corresponding -packet throughput differ between 305.3 kpps to 447.1 kpps. Within each test run -of the four runs, when number of flows becomes larger, the packet throughput -seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 42 ms with an average leatency of less than 15 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 354.4 kpps to 381.8 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for three test runs, whose values change a -lot from 10 pps to 501 kpps. While results of the rest test run seem the same -and keep stable with the average number of packets transmitted per second of 10 -pps. However, the total number of packets received per second of the four runs -look similar, which have a large wide range of 2 pps to 815 kpps. - -In some test runs when running with less than approx. 251000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 251000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on LF POD1_ with: -Apex -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Ericsson POD2_ or LF POD2_ between August 25 and 29 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.5 and 0.6 ms. -A few runs start with a 1 - 1.5 ms RTT spike (This could be because of normal ARP -handling). One test run has a greater RTT spike of 1.9 ms, which is the same -one with the 0.7 ms average. The other runs have no similar spike at all. -To be able to draw conclusions more runs should be made. -SLA set to 10 ms. The SLA value is used as a reference, it has not -been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 170 and 200 MB/s. Within each test run the results -vary, with a minimum 2 MB/s and maximum 838 MB/s on the totality. Most runs -have a minimum BW of 3 MB/s (two runs at 2 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 617 and 838 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 1.2 ns. The variations within each test run are similar, between -1.215 and 1.219 ns. One exception is February 16, where the average is 1.222 -and varies between 1.22 and 1.28 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. On the first date the reported packet delay variation varies between -0.0025 and 0.011 ms, with an average delay variation of 0.0067 ms. -On the second date the delay variation varies between 0.002 and 0.006 ms, with -an average delay variation of 0.004 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth vary between -17.4 and 17.9 GB/s. Within each test run the results vary more, with a minimal -BW of 16.4 GB/s and maximum of 18.2 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 3080 and 3240, -one result each date. The average score on the total is 3150. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -15.5 and 25.4 GB/s. Within each test run the results vary more, with a minimal -BW of 9.7 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - -Conclusions and recommendations -------------------------------- -The pktgen test configuration has a relatively large base effect on RTT in -TC037 compared to TC002, where there is no background load at all. Approx. -15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage -difference in RTT results. -Especially RTT and throughput come out with better results than for instance -the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should -probably be further analyzed and understood. Also of interest could be -to make further analyzes to find patterns and reasons for lost traffic. -Also of interest could be to see if there are continuous variations where -some test cases stand out with better or worse results than the general test -case. - - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD6: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD6_ between September 1 and 8 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.01 ms and 1.88 ms. -Only one test run has reached greatest RTT spike of 1.88 ms. Meanwhile, the -smallest network latency is 1.01 ms, which is obtained on Sep. 1st. In general, -the average of network latency of the four test runs are between 1.29 ms and -1.34 ms. SLA set to be 10 ms. The SLA value is used as a reference, it has not -been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 183.65 -MB/s. The IO read bandwidth of the three runs looks similar, with an average -between 62.9 and 64.3 MB/s, except one on Sep. 1, for its maximum storage -throughput is only 159.1 MB/s. One of the runs has a minimum BW of 685 KB/s and -other has a maximum BW of 183.6 MB/s. The SLA of read bandwidth sets to be -400 MB/s, which is used as a reference, and it has not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value between -1.41k per second and 1.64k per second, and meanwhile, the minimum result is -only 55 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.152 ns and 1.179 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 8, the memory read latency of which is ranging -from 1.120 ns to 1.221 ns. However, the results on September 7 change very -little. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the packet delay variation between 2 VMs on -different blades. The reported packet delay variations of the four test runs -differ from each other. In general, the packet delay of the first two runs look -similar, for they both stay stable within each run. And the mean packet delay -of them are 0.0087 ms and 0.0127 ms respectively. Of the four runs, the fourth -has the worst result, because the packet delay reaches 0.0187 ms. The SLA value -sets to be 10 ms. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the trend of -three memory bandwidth almost look similar, which all have a narrow range, and -the average result is 11.78 GB/s. Here SLA set to be 15 GB/s. The SLA value is -used as a reference, it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3260k to 3328k, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is between 307.3 kpps and -447.1 kpps, of which the result of the third run is the highest. The RTT -results of all the test runs keep flat at approx. 15 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 418.1 kpps and the -minimum throughput is 326.5 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is approx. 15 ms. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and nine percent respectively. And the best result is obtained on Sep. -1, with an CPU load of nine percent. But on the whole, the CPU load is very -poor, since the average value is quite small. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 21.9 GB/s to 25.9 GB/s and then to 17.8 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 2 kb or 16 kb, the memory write bandwidth -look similar with a minimal BW of 24.8 GB/s and peak value of 27.8 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 39 ms and the average RTT is usually approx. 15 ms. The network latency -tested on Sep. 1 and Sep. 8 have a peak latency of 39 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 267 MiB for the -four runs. In general, the four test runs have very large memory utilization, -which can reach 257 MiB on average. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 233 MiB to 241 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -305.3 kpps to 447.1 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding average packet -throughput is between 354.4 kpps and 381.8 kpps. In summary, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 42 -ms and the average RTT is usually approx. 15 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 212 MiB, which is same for the four runs, and the smallest cache -size is 75 MiB. On the whole, the average cache size of the four runs look the -same and is between 197 MiB and 211 MiB. Meanwhile, the tread of the buffer -size keep flat, since they have a minimum value of 7 MiB and a maximum value of -8 MiB, with an average value of about 7.9 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs differ from 354.4 kpps to 381.8 kpps. The average number of -flows in these tests is 240k, and each run has a minimum number of flows of 2 -and a maximum number of flows of 1.001 Mil. At the same time, the corresponding -packet throughput differ between 305.3 kpps to 447.1 kpps. Within each test run -of the four runs, when number of flows becomes larger, the packet throughput -seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 42 ms with an average leatency of less than 15 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 354.4 kpps to 381.8 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for three test runs, whose values change a -lot from 10 pps to 501 kpps. While results of the rest test run seem the same -and keep stable with the average number of packets transmitted per second of 10 -pps. However, the total number of packets received per second of the four runs -look similar, which have a large wide range of 2 pps to 815 kpps. - -In some test runs when running with less than approx. 251000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 251000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD6_ with: -Joid -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - diff --git a/docs/release/results/os-odl_l2-sfc-ha.rst b/docs/release/results/os-odl_l2-sfc-ha.rst deleted file mode 100644 index e27562cae..000000000 --- a/docs/release/results/os-odl_l2-sfc-ha.rst +++ /dev/null @@ -1,231 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -================================== -Test Results for os-odl_l2-sfc-ha -================================== - -.. toctree:: - :maxdepth: 2 - - -Fuel -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the LF POD2_ or Ericsson POD2_ between September 16 and 20 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.32 ms and 1.42 ms. -Only one test run on Sep. 20 has reached greatest RTT spike of 4.66 ms. -Meanwhile, the smallest network latency is 0.16 ms, which is obtained on Sep. -17th. To sum up, the curve of network latency has very small wave, which is -less than 5 ms. SLA sets to be 10 ms. The SLA value is used as a reference, it -has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 734 -MB/s. The IO read bandwidth of the first three runs looks similar, with an -average of less than 100 KB/s, except one on Sep. 20, whose maximum storage -throughput can reach 734 MB/s. The SLA of read bandwidth sets to be 400 MB/s, -which is used as a reference, and it has not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value between -1.8k per second and 3.27k per second, and meanwhile, the minimum result is -only 60 times per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.085 ns and 1.218 -ns on average. The variations within each test run are quite small. For -Ericsson pod2, the average of memory latency is approx. 1.217 ms. While for LF -pod2, the average value is about 1.085 ms. It can be seen that the performance -of LF is better than Ericsson's. The SLA sets to be 30 ns. The SLA value is -used as a reference, it has not been defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. The four test runs all have a narrow range -of change with the average memory and write BW of 18.5 GB/s. Here SLA set to be -15 GB/s. The SLA value is used as a reference, it has not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3209k to 3843k, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the three test runs is between 439 kpps and -582 kpps, and the test run on Sep. 17th has the lowest average value of 371 -kpps. The RTT results of all the test runs keep flat at approx. 10 ms. It is -obvious that the PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved, since the largest packet throughput is 680 kpps and the -minimum throughput is 319 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar trend of RTT with the average value of approx. 12 ms. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and ten percent respectively. And the best result is obtained on Sep. -17th, with an CPU load of ten percent. But on the whole, the CPU load is very -poor, since the average value is quite small. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the average memory write -bandwidth tends to become larger first and then smaller within every run test -for the two pods, which rangs from 25.1 GB/s to 29.4 GB/s and then to 19.2 GB/s -on average. Since the test id is one, it is that only the INT memory write -bandwidth is tested. On the whole, with the block size becoming larger, the -memory write bandwidth tends to decrease. SLA sets to be 7 GB/s. The SLA value -is used as a reference, it has not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 27 ms and the average RTT is usually approx. 12 ms. The network latency -tested on Sep. 27th has a peak latency of 27 ms. But on the whole, the average -RTTs of the four runs keep flat. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 269 MiB for the -four runs. In general, the four test runs have very large memory utilization, -which can reach 251 MiB on average. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 231 MiB to 248 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -371 kpps to 582 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding average packet -throughput is between 319 kpps and 680 kpps. In summary, the PPS results -seem consistent. Within each test run of the four runs, when number of flows -becomes larger, the packet throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 24 -ms and the average RTT is usually approx. 12 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 213 MiB, and the smallest cache size is 99 MiB, which is same for -the four runs. On the whole, the average cache size of the four runs look the -same and is between 184 MiB and 205 MiB. Meanwhile, the tread of the buffer -size keep stable, since they have a minimum value of 7 MiB and a maximum value of -8 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs differ from 371 kpps to 582 kpps. The average number of -flows in these tests is 240k, and each run has a minimum number of flows of 2 -and a maximum number of flows of 1.001 Mil. At the same time, the corresponding -packet throughput differ between 319 kpps to 680 kpps. Within each test run -of the four runs, when number of flows becomes larger, the packet throughput -seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 24 ms with an average leatency of less than 13 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 370 kpps to 582 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for the four test runs, whose values change a -lot from 10 pps to 697 kpps. However, the total number of packets received per -second of three runs look similar, which have a large wide range of 2 pps to -1.497 Mpps, while the results on Sep. 18th and 20th have very small maximum -number of packets received per second of 817 kpps. - -In some test runs when running with less than approx. 251000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 251000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. diff --git a/docs/release/results/os-onos-nofeature-ha.rst b/docs/release/results/os-onos-nofeature-ha.rst deleted file mode 100644 index d8b3ace5f..000000000 --- a/docs/release/results/os-onos-nofeature-ha.rst +++ /dev/null @@ -1,257 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -====================================== -Test Results for os-onos-nofeature-ha -====================================== - -.. toctree:: - :maxdepth: 2 - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD6: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 5 scenario test runs, each run -on the Intel POD6_ between September 13 and 16 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.50 and 1.68 ms. -Only one test run has reached greatest RTT spike of 2.62 ms, which has -the smallest RTT of 1.00 ms. The other four runs have no similar spike at all, -the minimum and average RTTs of which are approx. 1.06 ms and 1.32 ms. SLA set -to be 10 ms. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 175.4 -MB/s. The IO read bandwidth of the four runs looks similar on different four -days, with an average between 58.1 and 62.0 MB/s, except one on Sep. 14, for -its maximum storage throughput is only 133.0 MB/s. One of the runs has a -minimum BW of 497 KM/s and other has a maximum BW of 177.4 MB/s. The SLA of read -bandwidth sets to be 400 MB/s, which is used as a reference, and it has not -been defined by OPNFV. - -The results of storage IOPS for the five runs look similar with each other. The -IO read times per second of the five test runs have an average value between -1.20 K/s and 1.61 K/s, and meanwhile, the minimum result is only 41 times per -second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the five runs is between 1.146 ns and 1.172 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 13, the memory read latency of which is ranging -from 1.152 ns to 1.221 ns. However, the results on September 14 change very -little. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the packet delay variation between 2 VMs on -different blades. The reported packet delay variations of the five test runs -differ from each other. In general, the packet delay of the first two runs look -similar, for they both stay stable within each run. And the mean packet delay of -of them are 0.07714 ms and 0.07982 ms respectively. Of the five runs, the third -has the worst result, because the packet delay reaches 0.08384 ms. The trend of -therest two runs look the same, for the average packet delay are 0.07808 ms and -0.07727 ms respectively. The SLA value sets to be 10 ms. The SLA value is used -as a reference, it has not been defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the five test runs, the memory -bandwidth of last three test runs almost keep stable within each run, which is -11.64, 11.71 and 11.61 GB/s on average. However, the memory read and write -bandwidth on Sep. 13 has a large range, for it ranges from 6.68 GB/s to 11.73 -GB/s. Here SLA set to be 15 GB/s. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3208 to 3314, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the five test runs is between 259.6 kpps and -318.4 kpps, of which the result of the second run is the highest. The RTT -results of all the test runs keep flat at approx. 20 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the five test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 398.9 kpps and the -minimum throughput is 250.6 kpps respectively. - -There are no errors of packets received in the five runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the five -runs have the similar average vaue, that is between 17 ms and 22 ms, of which -the worest RTT is 53 ms on Sep. 14th. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and 10 percent respectively. And the best result is obtained on Sep. -13rd, with an CPU load of 10 percent. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 21.6 GB/s to 26.8 GB/s and then to 18.4 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is 8 kb and 16 kb, the memory write bandwidth -look similar with a minimal BW of 23.0 GB/s and peak value of 28.6 GB/s. And -then with the block size becoming larger, the memory write bandwidth tends to -decrease. SLA sets to be 7 GB/s. The SLA value is used as a a reference, it has -not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the five test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 53 ms and the average RTT is usually approx. 18 ms. The network latency -tested on Sep. 14 shows that it has a peak latency of 53 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 272 MiB on Sep -14. In general, the mean used memory of the five test runs have the similar -trend and the minimum memory used size is approx. 150 MiB, and the average -used memory size is about 250 MiB. On the other hand, for the mean free memory, -the five test runs have the similar trend, whose mean free memory change from -218 MiB to 342 MiB, with an average value of approx. 38 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the five test runs seem quite different, ranging from -285.29 kpps to 297.76 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 250.6k and 398.9k with an average packet throughput between -277.2 K and 318.4 K. In summary, the PPS results seem consistent. Within each -test run of the five runs, when number of flows becomes larger, the packet -throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the five test runs -look similar with each other. Within each test run, the maximum RTT is only 49 -ms and the average RTT is usually approx. 20 ms. On the whole, the average -RTTs of the five runs keep stable and the network latency is relatively short. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool.The largest -cache size is 215 MiB in the four runs, and the smallest cache size is 95 MiB. -On the whole, the average cache size of the five runs change a little and is -about 200 MiB, except the one on Sep. 14th, the mean cache size is very small, -which keeps 102 MiB. Meanwhile, the tread of the buffer size keep flat, since -they have a minimum value of 7 MiB and a maximum value of 8 MiB, with an -average value of about 7.8 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite different, ranging from 285.29 kpps to 297.76 -kpps. The average number of flows in these tests is 239.7k, and each run has a -minimum number of flows of 2 and a maximum number of flows of 1.001 Mil. At the -same time, the corresponding packet throughput differ between 227.3k and 398.9k -with an average packet throughput between 277.2k and 318.4k. Within each test -run of the five runs, when number of flows becomes larger, the packet -throughput seems not larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs - between 0 ms and 49 ms with an average leatency of less than 22 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the five runs differ from 250.6 kpps to 398.9 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for four test runs, whose values change a -lot from 10 pps to 399 kpps, except the one on Sep. 14th, whose total number -of transmitted per second keep stable, that is 10 pps. Similarly, the total -number of packets received per second look the same for four runs, except the -one on Sep. 14th, whose value is only 10 pps. - -In some test runs when running with less than approx. 90000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 250000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD6_ with: -Joid -OpenStack Mitaka -Onos Goldeneye -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. diff --git a/docs/release/results/os-onos-sfc-ha.rst b/docs/release/results/os-onos-sfc-ha.rst deleted file mode 100644 index e52ae3d55..000000000 --- a/docs/release/results/os-onos-sfc-ha.rst +++ /dev/null @@ -1,517 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 - - -=============================== -Test Results for os-onos-sfc-ha -=============================== - -.. toctree:: - :maxdepth: 2 - - -fuel -==== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Ericsson POD2_ or LF POD2_ between September 5 and 10 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 0.5 and 0.6 ms. -A few runs start with a 1 - 1.5 ms RTT spike (This could be because of normal ARP -handling). One test run has a greater RTT spike of 1.9 ms, which is the same -one with the 0.7 ms average. The other runs have no similar spike at all. -To be able to draw conclusions more runs should be made. -SLA set to 10 ms. The SLA value is used as a reference, it has not -been defined by OPNFV. - -TC005 ------ -The IO read bandwidth looks similar between different dates, with an -average between approx. 170 and 200 MB/s. Within each test run the results -vary, with a minimum 2 MB/s and maximum 838 MB/s on the totality. Most runs -have a minimum BW of 3 MB/s (two runs at 2 MB/s). The maximum BW varies more in -absolute numbers between the dates, between 617 and 838 MB/s. -SLA set to 400 MB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC010 ------ -The measurements for memory latency are similar between test dates and result -in approx. 1.2 ns. The variations within each test run are similar, between -1.215 and 1.219 ns. One exception is February 16, where the average is 1.222 -and varies between 1.22 and 1.28 ns. -SLA set to 30 ns. The SLA value is used as a reference, it has not been defined -by OPNFV. - -TC011 ------ -Packet delay variation between 2 VMs on different blades is measured using -Iperf3. On the first date the reported packet delay variation varies between -0.0025 and 0.011 ms, with an average delay variation of 0.0067 ms. -On the second date the delay variation varies between 0.002 and 0.006 ms, with -an average delay variation of 0.004 ms. - -TC012 ------ -Between test dates, the average measurements for memory bandwidth vary between -17.4 and 17.9 GB/s. Within each test run the results vary more, with a minimal -BW of 16.4 GB/s and maximum of 18.2 GB/s on the totality. -SLA set to 15 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC014 ------ -The Unixbench processor test run results vary between scores 3080 and 3240, -one result each date. The average score on the total is 3150. -No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -CPU utilization statistics are collected during UDP flows sent between the VMs -using pktgen as packet generator tool. The average measurements for CPU -utilization ratio vary between 1% to 2%. The peak of CPU utilization ratio -appears around 7%. - -TC069 ------ -Between test dates, the average measurements for memory bandwidth vary between -15.5 and 25.4 GB/s. Within each test run the results vary more, with a minimal -BW of 9.7 GB/s and maximum of 29.5 GB/s on the totality. -SLA set to 6 GB/s. The SLA value is used as a reference, it has not been -defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Memory utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for memory -utilization vary between 225MB to 246MB. The peak of memory utilization appears -around 340MB. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Cache utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The average measurements for cache -utilization vary between 205MB to 212MB. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs at -approx. 15 ms. Some test runs show an increase with many flows, in the range -towards 16 to 17 ms. One exception standing out is Feb. 15 where the average -RTT is stable at approx. 13 ms. The PPS results are not as consistent as the -RTT results. -In some test runs when running with less than approx. 10000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. Around 20 percent decrease in the worst -case. For the other test runs there is however no significant change to the PPS -throughput when the number of flows are increased. In some test runs the PPS -is also greater with 1000000 flows compared to other test runs where the PPS -result is less with only 2 flows. - -The average PPS throughput in the different runs varies between 414000 and -452000 PPS. The total amount of packets in each test run is approx. 7500000 to -8200000 packets. One test run Feb. 15 sticks out with a PPS average of -558000 and approx. 1100000 packets in total (same as the on mentioned earlier -for RTT results). - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally range between 100 and 1000 per test run, -but there are spikes in the range of 10000 lost packets as well, and even -more in a rare cases. - -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. Total number of packets received per -second was average on 200 kpps and total number of packets transmitted per -second was average on 600 kpps. - -Detailed test results ---------------------- -The scenario was run on Ericsson POD2_ and LF POD2_ with: -Fuel 9.0 -OpenStack Mitaka -Onos Goldeneye -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - -Conclusions and recommendations -------------------------------- -The pktgen test configuration has a relatively large base effect on RTT in -TC037 compared to TC002, where there is no background load at all. Approx. -15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage -difference in RTT results. -Especially RTT and throughput come out with better results than for instance -the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should -probably be further analyzed and understood. Also of interest could be -to make further analyzes to find patterns and reasons for lost traffic. -Also of interest could be to see if there are continuous variations where -some test cases stand out with better or worse results than the general test -case. - - -Joid -===== - -.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main -.. _POD6: https://wiki.opnfv.org/pharos?&#community_test_labs - -Overview of test results ------------------------- - -See Grafana_ for viewing test result metrics for each respective test case. It -is possible to chose which specific scenarios to look at, and then to zoom in -on the details of each run test scenario as well. - -All of the test case results below are based on 4 scenario test runs, each run -on the Intel POD6_ between September 8 and 11 in 2016. - -TC002 ------ -The round-trip-time (RTT) between 2 VMs on different blades is measured using -ping. Most test run measurements result on average between 1.35 ms and 1.57 ms. -Only one test run has reached greatest RTT spike of 2.58 ms. Meanwhile, the -smallest network latency is 1.11 ms, which is obtained on Sep. 11st. In -general, the average of network latency of the four test runs are between 1.35 -ms and 1.57 ms. SLA set to be 10 ms. The SLA value is used as a reference, it -has not been defined by OPNFV. - -TC005 ------ -The IO read bandwidth actually refers to the storage throughput, which is -measured by fio and the greatest IO read bandwidth of the four runs is 175.4 -MB/s. The IO read bandwidth of the three runs looks similar, with an average -between 43.7 and 56.3 MB/s, except one on Sep. 8, for its maximum storage -throughput is only 107.9 MB/s. One of the runs has a minimum BW of 478 KM/s and -other has a maximum BW of 168.6 MB/s. The SLA of read bandwidth sets to be -400 MB/s, which is used as a reference, and it has not been defined by OPNFV. - -The results of storage IOPS for the four runs look similar with each other. The -IO read times per second of the four test runs have an average value between -978 per second and 1.20 K/s, and meanwhile, the minimum result is only 36 times -per second. - -TC010 ------ -The tool we use to measure memory read latency is lmbench, which is a series of -micro benchmarks intended to measure basic operating system and hardware system -metrics. The memory read latency of the four runs is between 1.164 ns and 1.244 -ns on average. The variations within each test run are quite different, some -vary from a large range and others have a small change. For example, the -largest change is on September 10, the memory read latency of which is ranging -from 1.128 ns to 1.381 ns. However, the results on September 11 change very -little. The SLA sets to be 30 ns. The SLA value is used as a reference, it has -not been defined by OPNFV. - -TC011 ------ -Iperf3 is a tool for evaluating the packet delay variation between 2 VMs on -different blades. The reported packet delay variations of the four test runs -differ from each other. In general, the packet delay of two runs look similar, -for they both stay stable within each run. And the mean packet delay of them -are 0.0772 ms and 0.0788 ms respectively. Of the four runs, the fourth has the -worst result, because the packet delay reaches 0.0838 ms. The rest one has a -large wide range from 0.0666 ms to 0.0798 ms. The SLA value sets to be 10 ms. -The SLA value is used as a reference, it has not been defined by OPNFV. - -TC012 ------ -Lmbench is also used to measure the memory read and write bandwidth, in which -we use bw_mem to obtain the results. Among the four test runs, the trend of the -memory bandwidth almost look similar, which all have a large wide range, and -the minimum and maximum results are 9.02 GB/s and 18.14 GB/s. Here SLA set to -be 15 GB/s. The SLA value is used as a reference, it has not been defined by -OPNFV. - -TC014 ------ -The Unixbench is used to evaluate the IaaS processing speed with regards to -score of single cpu running and parallel running. It can be seen from the -dashboard that the processing test results vary from scores 3395 to 3475, and -there is only one result one date. No SLA set. - -TC037 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The mean packet throughput of the four test runs is between 362.1 kpps and -363.5 kpps, of which the result of the third run is the highest. The RTT -results of all the test runs keep flat at approx. 17 ms. It is obvious that the -PPS results are not as consistent as the RTT results. - -The No. flows of the four test runs are 240 k on average and the PPS results -look a little waved since the largest packet throughput is 418.1 kpps and the -minimum throughput is 326.5 kpps respectively. - -There are no errors of packets received in the four runs, but there are still -lost packets in all the test runs. The RTT values obtained by ping of the four -runs have the similar average vaue, that is approx. 17 ms, of which the worst -RTT is 39 ms on Sep. 11st. - -CPU load is measured by mpstat, and CPU load of the four test runs seem a -little similar, since the minimum value and the peak of CPU load is between 0 -percent and nine percent respectively. And the best result is obtained on Sep. -10, with an CPU load of nine percent. - -TC069 ------ -With the block size changing from 1 kb to 512 kb, the memory write bandwidth -tends to become larger first and then smaller within every run test, which -rangs from 25.9 GB/s to 26.6 GB/s and then to 18.1 GB/s on average. Since the -test id is one, it is that only the INT memory write bandwidth is tested. On -the whole, when the block size is from 2 kb to 16 kb, the memory write -bandwidth look similar with a minimal BW of 22.1 GB/s and peak value of 28.6 -GB/s. And then with the block size becoming larger, the memory write bandwidth -tends to decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, -it has not been defined by OPNFV. - -TC070 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other, and within these test runs, the maximum RTT can -reach 39 ms and the average RTT is usually approx. 17 ms. The network latency -tested on Sep. 11 shows that it has a peak latency of 39 ms. But on the whole, -the average RTTs of the five runs keep flat and the network latency is -relatively short. - -Memory utilization is measured by free, which can display amount of free and -used memory in the system. The largest amount of used memory is 270 MiB on the -first two runs. In general, the mean used memory of two test runs have very -large memory utilization, which can reach 264 MiB on average. And the other two -runs have a large wide range of memory usage with the minimum value of 150 MiB -and the maximum value of 270 MiB. On the other hand, for the mean free memory, -the four test runs have the similar trend with that of the mean used memory. -In general, the mean free memory change from 220 MiB to 342 MiB. - -Packet throughput and packet loss can be measured by pktgen, which is a tool -in the network for generating traffic loads for network experiments. The mean -packet throughput of the four test runs seem quite different, ranging from -326.5 kpps to 418.1 kpps. The average number of flows in these tests is -240000, and each run has a minimum number of flows of 2 and a maximum number -of flows of 1.001 Mil. At the same time, the corresponding packet throughput -differ between 326.5 kpps and 418.1 kpps with an average packet throughput between -361.7 kpps and 363.5 kpps. In summary, the PPS results seem consistent. Within each -test run of the four runs, when number of flows becomes larger, the packet -throughput seems not larger at the same time. - -TC071 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The network latency is measured by ping, and the results of the four test runs -look similar with each other. Within each test run, the maximum RTT is only 47 -ms and the average RTT is usually approx. 15 ms. On the whole, the average -RTTs of the four runs keep stable and the network latency is relatively small. - -Cache utilization is measured by cachestat, which can display size of cache and -buffer in the system. Cache utilization statistics are collected during UDP -flows sent between the VMs using pktgen as packet generator tool. The largest -cache size is 214 MiB, which is same for the four runs, and the smallest cache -size is 94 MiB. On the whole, the average cache size of the four runs look the -same and is between 198 MiB and 207 MiB. Meanwhile, the tread of the buffer -size keep flat, since they have a minimum value of 7 MiB and a maximum value of -8 MiB, with an average value of about 7.9 MiB. - -Packet throughput can be measured by pktgen, which is a tool in the network for -generating traffic loads for network experiments. The mean packet throughput of -the four test runs seem quite the same, which is approx. 363 kpps. The average -number of flows in these tests is 240k, and each run has a minimum number of -flows of 2 and a maximum number of flows of 1.001 Mil. At the same time, the -corresponding packet throughput differ between 327 kpps and 418 kpps with an -average packet throughput of about 363 kpps. Within each test run of the four -runs, when number of flows becomes larger, the packet throughput seems not -larger in the meantime. - -TC072 ------ -The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs -on different blades are measured when increasing the amount of UDP flows sent -between the VMs using pktgen as packet generator tool. - -Round trip times and packet throughput between VMs can typically be affected by -the amount of flows set up and result in higher RTT and less PPS throughput. - -The RTT results are similar throughout the different test dates and runs -between 0 ms and 47 ms with an average leatency of less than 16 ms. The PPS -results are not as consistent as the RTT results, for the mean packet -throughput of the four runs differ from 361.7 kpps to 365.0 kpps. - -Network utilization is measured by sar, that is system activity reporter, which -can display the average statistics for the time since the system was started. -Network utilization statistics are collected during UDP flows sent between the -VMs using pktgen as packet generator tool. The largest total number of packets -transmitted per second look similar for two test runs, whose values change a -lot from 10 pps to 432 kpps. While results of the other test runs seem the same -and keep stable with the average number of packets transmitted per second of 10 -pps. However, the total number of packets received per second of the four runs -look similar, which have a large wide range of 2 pps to 657 kpps. - -In some test runs when running with less than approx. 250000 flows the PPS -throughput is normally flatter compared to when running with more flows, after -which the PPS throughput decreases. For the other test runs there is however no -significant change to the PPS throughput when the number of flows are -increased. In some test runs the PPS is also greater with 250000 flows -compared to other test runs where the PPS result is less with only 2 flows. - -There are lost packets reported in most of the test runs. There is no observed -correlation between the amount of flows and the amount of lost packets. -The lost amount of packets normally differs a lot per test run. - -Detailed test results ---------------------- -The scenario was run on Intel POD6_ with: -Joid -OpenStack Mitaka -Onos Goldeneye -OpenVirtualSwitch 2.5.90 -OpenDayLight Beryllium - -Rationale for decisions ------------------------ -Pass - -Conclusions and recommendations -------------------------------- -Tests were successfully executed and metrics collected. -No SLA was verified. To be decided on in next release of OPNFV. - diff --git a/docs/release/results/overview.rst b/docs/release/results/overview.rst index b4a050545..9fd74797c 100644 --- a/docs/release/results/overview.rst +++ b/docs/release/results/overview.rst @@ -42,55 +42,31 @@ environment, features or test framework. The list of scenarios supported by each installer can be described as follows: -+-------------------------+---------+---------+---------+---------+ -| Scenario | Apex | Compass | Fuel | Joid | -+=========================+=========+=========+=========+=========+ -| os-nosdn-nofeature-noha | | | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-nofeature-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-nofeature-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-nofeature-noha| | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l3-nofeature-ha | X | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l3-nofeature-noha| | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-onos-sfc-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-onos-sfc-noha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-onos-nofeature-ha | X | X | X | X | -+-------------------------+---------+---------+---------+---------+ -| os-onos-nofeature-noha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-sfc-ha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-sfc-noha | X | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-bgpvpn-ha | X | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-bgpvpn-noha | | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-kvm-ha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-kvm-noha | | X | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-ovs-ha | | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-ovs-noha | X | | X | | -+-------------------------+---------+---------+---------+---------+ -| os-ocl-nofeature-ha | | | | | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-lxd-ha | | | | X | -+-------------------------+---------+---------+---------+---------+ -| os-nosdn-lxd-noha | | | | X | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-fdio-noha | X | | | | -+-------------------------+---------+---------+---------+---------+ -| os-odl_l2-moon-ha | | X | | | -+-------------------------+---------+---------+---------+---------+ ++-------------------------+------+---------+----------+------+------+-------+ +| Scenario | Apex | Compass | Fuel-arm | Fuel | Joid | Daisy | ++=========================+======+=========+==========+======+======+=======+ +| os-nosdn-nofeature-noha | X | | | | X | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-nofeature-ha | X | | X | X | X | X | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-bar-noha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-bar-ha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl-bgpvpn-ha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-calipso-noha | X | | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-kvm-ha | | X | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl_l3-nofeature-ha | | X | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl-sfc-ha | | X | | | | | ++-------------------------+------+---------+----------+------+------+-------+ +| os-odl-nofeature-ha | | | | X | | X | ++-------------------------+------+---------+----------+------+------+-------+ +| os-nosdn-ovs-ha | | | | X | | | ++-------------------------+------+---------+----------+------+------+-------+ To qualify for release, the scenarios must have deployed and been successfully tested in four consecutive installations to establish stability of deployment @@ -103,4 +79,4 @@ References * IEEE Std 829-2008. "Standard for Software and System Test Documentation". -* OPNFV Colorado release note for Yardstick. +* OPNFV Fraser release note for Yardstick. diff --git a/docs/release/results/results.rst b/docs/release/results/results.rst index 04c6b9f87..c75f5ae94 100644 --- a/docs/release/results/results.rst +++ b/docs/release/results/results.rst @@ -2,13 +2,16 @@ .. License. .. http://creativecommons.org/licenses/by/4.0 -Results listed by scenario +Results listed by test cases ========================== -The following sections describe the yardstick results as evaluated for the -Colorado release scenario validation runs. Each section describes the -determined state of the specific scenario as deployed in the Colorado -release process. +.. _TOM: https://wiki.opnfv.org/display/testing/R+post-processing+of+the+Yardstick+results + + +The following sections describe the yardstick test case results as evaluated +for the OPNFV Fraser release scenario validation runs. Each section describes +the determined state of the specific test case as executed in the Fraser release +process. All test date are analyzed using TOM_ tool. Scenario Results ================ @@ -16,21 +19,22 @@ Scenario Results .. _Dashboard: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main .. _Jenkins: https://build.opnfv.org/ci/view/yardstick/ + The following documents contain results of Yardstick test cases executed on -OPNFV labs, triggered by OPNFV CI pipeline, documented per scenario. +OPNFV labs, triggered by OPNFV CI pipeline, documented per test case. .. toctree:: :maxdepth: 1 - os-nosdn-nofeature-ha.rst - os-nosdn-nofeature-noha.rst - os-odl_l2-nofeature-ha.rst - os-odl_l2-bgpvpn-ha.rst - os-odl_l2-sfc-ha.rst - os-nosdn-kvm-ha.rst - os-onos-nofeature-ha.rst - os-onos-sfc-ha.rst + tc002-network-latency.rst + tc010-memory-read-latency.rst + tc011-packet-delay-variation.rst + tc012-memory-read-write-bandwidth.rst + tc014-cpu-processing-speed.rst + tc069-memory-write-bandwidth.rst + tc082-context-switches-under-load.rst + tc083-network-throughput-between-vm.rst Test results of executed tests are avilable in Dashboard_ and logs in Jenkins_. diff --git a/docs/release/results/tc002-network-latency.rst b/docs/release/results/tc002-network-latency.rst new file mode 100644 index 000000000..722423473 --- /dev/null +++ b/docs/release/results/tc002-network-latency.rst @@ -0,0 +1,317 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +====================================== +Test results for TC002 network latency +====================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC002 verifies that network latency is within acceptable boundaries when packets travel between hosts located on same or different compute blades. +Ping packets (ICMP protocol's mandatory ECHO_REQUEST datagram) are sent from host VM to target VM(s) to elicit ICMP ECHO_RESPONSE. + +Metric: RTT (Round Trip Time) +Unit: ms + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [0.214], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [0.309], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [0.3145], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [0.3585], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [0.3765], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [0.403], + + "os-odl-sfc-ha:huawei-pod2:compass": [0.413], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [0.494], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [0.5715], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [0.5785], + + "os-odl-sfc-ha:lf-pod1:apex": [0.617], + + "os-odl-nofeature-ha:lf-pod1:apex": [0.62], + + "os-nosdn-bar-noha:lf-pod1:apex": [0.632], + + "os-odl-nofeature-noha:lf-pod1:apex": [0.635], + + "os-odl-bgpvpn-ha:lf-pod1:apex": [0.658], + + "os-odl-sfc-noha:lf-pod1:apex": [0.663], + + "os-nosdn-bar-ha:lf-pod1:apex": [0.668], + + "os-ovn-nofeature-noha:lf-pod1:apex": [0.668], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [0.6815], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [0.7005], + + "os-nosdn-bar-ha:huawei-pod2:compass": [0.778], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [0.7825], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [0.7885], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [0.795], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [0.8045], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [0.8335], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [0.8755], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [0.8855], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [0.8895], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [0.901], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [0.956], + + "os-nosdn-lxd-noha:intel-pod5:joid": [1.131], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [1.173], + + "os-odl-sfc-ha:huawei-virtual8:compass": [1.2015], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [1.204], + + "os-nosdn-lxd-ha:intel-pod5:joid": [1.2245], + + "os-odl-nofeature-ha:lf-pod2:fuel": [1.2285], + + "os-odl-sfc-noha:huawei-virtual4:compass": [1.3055], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [1.309], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [1.313], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [1.319], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [1.3425], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [1.3475], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [1.348], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [1.432], + + "os-odl_l3-nofeature-noha:huawei-virtual9:compass": [1.442], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [1.4505], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [1.497], + + "os-odl-sfc-noha:huawei-virtual3:compass": [1.504], + + "os-odl-nofeature-ha:arm-pod5:fuel": [1.519], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [1.5415], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [1.5785], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [1.604], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [1.61], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [1.633], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [1.6485], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [1.7085], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [1.71], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [1.7955], + + "os-odl-nofeature-ha:arm-pod6:fuel": [1.838], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [1.88], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [1.8975], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [1.923], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [1.944], + + "os-odl-sfc-ha:huawei-virtual3:compass": [1.968], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [1.986], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [2.0415], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [2.071], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [2.0855], + + "os-odl-sfc-ha:huawei-virtual4:compass": [2.1085], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [2.1135], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [2.234], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [2.294], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [2.304], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [2.378], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [2.397], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [2.472], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [2.603], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [2.635], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [2.9055], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [3.1295], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [3.337], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [3.634], + + "os-nosdn-nofeature-noha:ericsson-virtual1:fuel": [3.875], + + "os-odl-nofeature-noha:ericsson-virtual1:fuel": [3.9655], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [3.9795] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc002_scenario.png + :width: 800px + :alt: TC002 influence of scenario + +{ + + "os-odl_l2-moon-ha": [0.3415], + + "os-nosdn-ovs-ha": [0.3625], + + "os-nosdn-ovs_dpdk-noha": [0.378], + + "os-nosdn-ovs_dpdk-ha": [0.5265], + + "os-nosdn-bar-noha": [0.632], + + "os-odl-bgpvpn-ha": [0.658], + + "os-ovn-nofeature-noha": [0.668], + + "os-odl_l3-nofeature-ha": [0.8545], + + "os-nosdn-ovs-noha": [0.8575], + + "os-nosdn-bar-ha": [0.903], + + "os-odl-sfc-ha": [1.127], + + "os-nosdn-lxd-noha": [1.131], + + "os-nosdn-nofeature-ha": [1.152], + + "os-odl_l2-moon-noha": [1.1825], + + "os-nosdn-lxd-ha": [1.2245], + + "os-odl_l3-nofeature-noha": [1.337], + + "os-odl-nofeature-ha": [1.352], + + "os-odl-sfc-noha": [1.4255], + + "os-nosdn-kvm-noha": [1.5045], + + "os-nosdn-openbaton-ha": [1.5665], + + "os-nosdn-nofeature-noha": [1.729], + + "os-nosdn-kvm-ha": [1.7745], + + "os-odl-nofeature-noha": [3.106] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc002_pod.png + :width: 800px + :alt: TC002 influence of the POD + +{ + + "huawei-pod2": [0.3925], + + "lf-pod2": [0.5315], + + "lf-pod1": [0.62], + + "flex-pod2": [0.795], + + "huawei-pod12": [0.87], + + "intel-pod5": [1.25], + + "ericsson-virtual3": [1.2655], + + "ericsson-pod1": [1.372], + + "arm-pod5": [1.518], + + "huawei-virtual4": [1.5355], + + "huawei-virtual3": [1.606], + + "intel-pod18": [1.6575], + + "huawei-virtual8": [1.709], + + "huawei-virtual2": [1.872], + + "arm-pod6": [1.895], + + "huawei-virtual9": [2.0745], + + "huawei-virtual1": [2.495], + + "ericsson-virtual2": [2.7895], + + "ericsson-virtual4": [3.768], + + "ericsson-virtual1": [3.8035] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc010-memory-read-latency.rst b/docs/release/results/tc010-memory-read-latency.rst new file mode 100644 index 000000000..9a296b7a0 --- /dev/null +++ b/docs/release/results/tc010-memory-read-latency.rst @@ -0,0 +1,299 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +========================================== +Test results for TC010 memory read latency +========================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC010 measures the memory read latency for varying memory sizes and strides. +The test results shown below are for memory size of 16MB. + +Metric: Memory read latency +Unit: ns + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [5.3165], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [5.908], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [6.412], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [6.545], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [6.592], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [6.5975], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [6.7675], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [6.7675], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [6.7945], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [6.839], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [6.9695], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [7.123], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [7.289], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [7.4315], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [7.9], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [8.178], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [8.616], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [8.646], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [8.8615], + + "os-odl-sfc-ha:huawei-pod2:compass": [8.87], + + "os-nosdn-bar-ha:huawei-pod2:compass": [8.877], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [8.892], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [8.898], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [8.952], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [8.9745], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [9.0375], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [9.083], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [9.09], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [9.094], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [9.293], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [9.3525], + + "os-odl-sfc-noha:huawei-virtual4:compass": [9.477], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [9.5445], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [9.5575], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [9.6435], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [9.68], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [9.728], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [9.751], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [9.8645], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [9.969], + + "os-odl-sfc-noha:huawei-virtual3:compass": [10.029], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [10.088], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [10.2985], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [10.318], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [10.3215], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [10.617], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [10.762], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [10.7715], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [10.866], + + "os-odl-sfc-ha:huawei-virtual3:compass": [10.871], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [11.1605], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [11.227], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [11.348], + + "os-odl-sfc-ha:huawei-virtual4:compass": [11.453], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [11.571], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [11.5925], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [11.689], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [11.8695], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [12.199], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [12.433], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [12.713], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [15.328], + + "os-odl-nofeature-ha:lf-pod1:apex": [15.4265], + + "os-odl-nofeature-noha:lf-pod1:apex": [15.428], + + "os-ovn-nofeature-noha:lf-pod1:apex": [15.545], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [15.55], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [15.6395], + + "os-odl-sfc-noha:lf-pod1:apex": [15.696], + + "os-odl-sfc-ha:lf-pod1:apex": [15.774], + + "os-nosdn-bar-ha:lf-pod1:apex": [16.6455], + + "os-nosdn-bar-noha:lf-pod1:apex": [16.861], + + "os-odl-nofeature-ha:arm-pod5:fuel": [18.071], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [18.116], + + "os-odl-nofeature-ha:lf-pod2:fuel": [18.8365], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [18.927], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [29.557], + + "os-odl-sfc-ha:huawei-virtual8:compass": [32.492], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [37.623], + + "os-odl-nofeature-ha:arm-pod6:fuel": [41.345], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [42.3795], + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc010_scenario.png + :width: 800px + :alt: TC010 influence of scenario + +{ + + "os-nosdn-ovs-noha": [7.9], + + "os-nosdn-ovs_dpdk-noha": [8.641], + + "os-nosdn-ovs_dpdk-ha": [8.6815], + + "os-nosdn-openbaton-ha": [8.882], + + "os-odl_l2-moon-ha": [8.948], + + "os-odl_l3-nofeature-ha": [8.992], + + "os-nosdn-nofeature-ha": [9.118], + + "os-nosdn-nofeature-noha": [9.174], + + "os-odl_l2-moon-noha": [9.312], + + "os-odl_l3-nofeature-noha": [9.5535], + + "os-odl-nofeature-noha": [9.673], + + "os-odl-sfc-noha": [9.8385], + + "os-odl-sfc-ha": [9.98], + + "os-nosdn-kvm-noha": [10.088], + + "os-nosdn-kvm-ha": [11.1705], + + "os-nosdn-bar-ha": [12.1395], + + "os-nosdn-ovs-ha": [15.3195], + + "os-ovn-nofeature-noha": [15.545], + + "os-odl-nofeature-ha": [16.301], + + "os-nosdn-bar-noha": [16.861] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc010_pod.png + :width: 800px + :alt: TC010 influence of the POD + +{ + + "ericsson-pod1": [5.7785], + + "flex-pod2": [5.908], + + "ericsson-virtual1": [6.412], + + "intel-pod18": [6.5905], + + "intel-pod5": [6.6975], + + "ericsson-virtual4": [7.183], + + "ericsson-virtual2": [8.4985], + + "huawei-pod2": [8.877], + + "huawei-pod12": [9.091], + + "ericsson-virtual3": [9.719], + + "huawei-virtual4": [10.1195], + + "huawei-virtual3": [10.19], + + "huawei-virtual1": [10.3045], + + "huawei-virtual9": [10.318], + + "huawei-virtual2": [11.274], + + "lf-pod1": [15.7025], + + "lf-pod2": [15.8495], + + "arm-pod5": [18.092], + + "huawei-virtual8": [33.999], + + "arm-pod6": [41.5605] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc011-packet-delay-variation.rst b/docs/release/results/tc011-packet-delay-variation.rst new file mode 100644 index 000000000..b07ea8980 --- /dev/null +++ b/docs/release/results/tc011-packet-delay-variation.rst @@ -0,0 +1,262 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +============================================= +Test results for TC011 packet delay variation +============================================= + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC011 measures the packet delay variation sending the packets from one VM to the other. + +Metric: packet delay variation (jitter) +Unit: ms + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [2996], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [2996], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [2996], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [2996], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [2997], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [2997], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [2997], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [2997], + + "os-odl-sfc-ha:huawei-virtual4:compass": [2997], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [2997.5], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [2998], + + "os-odl-sfc-ha:huawei-virtual8:compass": [2998], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [2999], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [2999.5], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [3000], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [3001], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [3002], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [3002], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [3002], + + "os-odl-sfc-ha:huawei-virtual3:compass": [3002], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [3003], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [3003.5], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [3004], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [3004], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [3004.5], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [3005], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [3006], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [3006.5], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [3009], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [3010], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [3010], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [3012], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [3017], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [3017], + + "os-odl-sfc-noha:huawei-virtual4:compass": [3017], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [3018], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [3020], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [3021], + + "os-nosdn-bar-ha:huawei-pod2:compass": [3022], + + "os-nosdn-bar-ha:lf-pod1:apex": [3022], + + "os-nosdn-bar-noha:lf-pod1:apex": [3022], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [3022], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [3022], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [3022], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [3022], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [3022], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [3022], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [3022], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [3022], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [3022], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [3022], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [3022], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [3022], + + "os-odl-nofeature-ha:arm-pod5:fuel": [3022], + + "os-odl-sfc-ha:huawei-pod2:compass": [3022], + + "os-odl-sfc-ha:lf-pod1:apex": [3022], + + "os-odl-sfc-noha:huawei-virtual3:compass": [3022], + + "os-odl-sfc-noha:lf-pod1:apex": [3022], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [3022], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [3022], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [3022], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [3022], + + "os-ovn-nofeature-noha:lf-pod1:apex": [3022], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [3023], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [3023], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [3024] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc011_scenario.png + :width: 800px + :alt: TC011 influence of scenario + +{ + + "os-nosdn-ovs_dpdk-noha": [2996], + + "os-odl_l3-nofeature-noha": [2997], + + "os-nosdn-kvm-noha": [2999], + + "os-nosdn-ovs_dpdk-ha": [3002], + + "os-nosdn-kvm-ha": [3014.5], + + "os-odl-sfc-noha": [3018], + + "os-nosdn-nofeature-noha": [3020], + + "os-nosdn-openbaton-ha": [3020], + + "os-nosdn-bar-ha": [3022], + + "os-nosdn-bar-noha": [3022], + + "os-nosdn-nofeature-ha": [3022], + + "os-odl-nofeature-ha": [3022], + + "os-odl-sfc-ha": [3022], + + "os-odl_l2-moon-ha": [3022], + + "os-odl_l2-moon-noha": [3022], + + "os-odl_l3-nofeature-ha": [3022], + + "os-ovn-nofeature-noha": [3022] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc011_pod.png + :width: 800px + :alt: TC011 influence of the POD + +{ + + "huawei-virtual2": [2997], + + "flex-pod2": [2997.5], + + "huawei-virtual3": [2998], + + "huawei-virtual9": [3000], + + "huawei-virtual8": [3001], + + "huawei-virtual4": [3002], + + "ericsson-virtual3": [3006], + + "huawei-virtual1": [3007], + + "ericsson-virtual2": [3009], + + "intel-pod18": [3010], + + "ericsson-virtual4": [3017], + + "lf-pod2": [3021], + + "arm-pod5": [3022], + + "arm-pod6": [3022], + + "ericsson-pod1": [3022], + + "huawei-pod12": [3022], + + "huawei-pod2": [3022], + + "intel-pod5": [3022], + + "lf-pod1": [3022] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc012-memory-read-write-bandwidth.rst b/docs/release/results/tc012-memory-read-write-bandwidth.rst new file mode 100644 index 000000000..c28eb1f3c --- /dev/null +++ b/docs/release/results/tc012-memory-read-write-bandwidth.rst @@ -0,0 +1,299 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +================================================== +Test results for TC012 memory read/write bandwidth +================================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC012 measures the rate at which data can be read from and written to the memory (this includes all levels of memory). +In this test case, the bandwidth to read data from memory and then write data to the same memory location are measured. + +Metric: memory bandwidth +Unit: MBps + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-nosdn-nofeature-ha:lf-pod1:apex": [23126.325], + + "os-odl-nofeature-noha:lf-pod1:apex": [23123.975], + + "os-odl-nofeature-ha:lf-pod1:apex": [23068.965], + + "os-odl-nofeature-ha:lf-pod2:fuel": [22972.46], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [22912.015], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [22911.35], + + "os-ovn-nofeature-noha:lf-pod1:apex": [22900.93], + + "os-nosdn-bar-ha:lf-pod1:apex": [22767.56], + + "os-nosdn-bar-noha:lf-pod1:apex": [22721.83], + + "os-odl-sfc-noha:lf-pod1:apex": [22511.565], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [22071.235], + + "os-odl-sfc-ha:lf-pod1:apex": [21646.415], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [20229.99], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [17491.18], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [17474.965], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [17141.375], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [17134.99], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [17124.27], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [16599.325], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [16309.13], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [16137.48], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [15960.76], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [15685.505], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [15536.65], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [15431.795], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [15129.27], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [15125.51], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [15030.65], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [15019.89], + + "os-odl-sfc-ha:huawei-pod2:compass": [15005.11], + + "os-nosdn-bar-ha:huawei-pod2:compass": [14975.645], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [14968.97], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [14968.97], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [14741.425], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [14714.28], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [14674.38], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [14664.12], + + "os-odl-sfc-noha:huawei-virtual4:compass": [14587.62], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [14539.94], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [14534.54], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [14511.925], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [14496.875], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [14378.87], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [14366.69], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [14356.695], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [14341.605], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [14327.78], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [14313.81], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [14284.365], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [14157.99], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [14144.86], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [14138.9], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [14117.7], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [14097.255], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [14085.675], + + "os-odl-sfc-noha:huawei-virtual3:compass": [14071.605], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [14059.51], + + "os-odl-sfc-ha:huawei-virtual4:compass": [14057.155], + + "os-odl-sfc-ha:huawei-virtual3:compass": [14051.945], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [14020.74], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [14017.915], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [13954.27], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [13915.87], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [13874.59], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [13812.215], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [13777.59], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [13765.36], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [13559.905], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [13477.52], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [13255.17], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [13189.64], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [12718.545], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [12559.445], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [12409.66], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [8832.515], + + "os-odl-sfc-ha:huawei-virtual8:compass": [8823.955], + + "os-odl-nofeature-ha:arm-pod5:fuel": [4398.08], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [4375.75], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [4260.77], + + "os-odl-nofeature-ha:arm-pod6:fuel": [4259.62] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc012_scenario.png + :width: 800px + :alt: TC012 influence of scenario + +{ + + "os-ovn-nofeature-noha": [22900.93], + + "os-nosdn-bar-noha": [22721.83], + + "os-nosdn-ovs-ha": [22063.67], + + "os-odl-nofeature-ha": [17146.05], + + "os-odl-nofeature-noha": [16017.41], + + "os-nosdn-ovs-noha": [16005.74], + + "os-nosdn-nofeature-noha": [15290.94], + + "os-nosdn-nofeature-ha": [15038.74], + + "os-nosdn-bar-ha": [14972.975], + + "os-odl_l2-moon-ha": [14956.955], + + "os-odl_l3-nofeature-ha": [14839.21], + + "os-odl-sfc-ha": [14823.48], + + "os-nosdn-ovs_dpdk-ha": [14822.17], + + "os-nosdn-ovs_dpdk-noha": [14725.9], + + "os-odl_l2-moon-noha": [14665.4], + + "os-odl_l3-nofeature-noha": [14483.09], + + "os-odl-sfc-noha": [14373.21], + + "os-nosdn-openbaton-ha": [14135.325], + + "os-nosdn-kvm-noha": [14020.26], + + "os-nosdn-kvm-ha": [13996.02] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc012_pod.png + :width: 800px + :alt: TC012 influence of the POD + +{ + + "lf-pod1": [22912.39], + + "lf-pod2": [22637.67], + + "flex-pod2": [20229.99], + + "ericsson-virtual1": [17474.965], + + "ericsson-pod1": [17127.38], + + "ericsson-virtual4": [16219.97], + + "ericsson-virtual2": [15652.28], + + "ericsson-virtual3": [15551.26], + + "huawei-pod2": [15017.2], + + "huawei-virtual4": [14266.34], + + "huawei-virtual1": [14233.035], + + "huawei-virtual3": [14227.63], + + "huawei-pod12": [14147.245], + + "intel-pod18": [14058.33], + + "huawei-virtual2": [13862.85], + + "intel-pod5": [13280.32], + + "huawei-virtual9": [12559.445], + + "huawei-virtual8": [8998.02], + + "arm-pod5": [4388.875], + + "arm-pod6": [4260.2] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc014-cpu-processing-speed.rst b/docs/release/results/tc014-cpu-processing-speed.rst new file mode 100644 index 000000000..34d4ad0f9 --- /dev/null +++ b/docs/release/results/tc014-cpu-processing-speed.rst @@ -0,0 +1,298 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +=========================================== +Test results for TC014 cpu processing speed +=========================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC014 measures score of single cpu running using UnixBench. + +Metric: score of single CPU running +Unit: N/A + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-odl-sfc-noha:lf-pod1:apex": [3735.2], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [3725.5], + + "os-odl-nofeature-ha:lf-pod2:fuel": [3711], + + "os-odl-nofeature-ha:lf-pod1:apex": [3708.4], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [3705.7], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [3704], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [3703.2], + + "os-odl-nofeature-noha:lf-pod1:apex": [3702.8], + + "os-odl-sfc-ha:lf-pod1:apex": [3698.7], + + "os-ovn-nofeature-noha:lf-pod1:apex": [3654.8], + + "os-nosdn-bar-ha:lf-pod1:apex": [3635.55], + + "os-nosdn-bar-noha:lf-pod1:apex": [3633.2], + + "os-nosdn-nofeature-noha:intel-pod18:joid": [3450.3], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [3406.4], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [3360.4], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [3340.65], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [3208.6], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [3134.8], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [3056.2], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [2988.9], + + "os-nosdn-ovs-ha:ericsson-pod1:fuel": [2773.7], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [2645.85], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [2625.3], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [2601.3], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [2590.4], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [2570.2], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [2558.8], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [2556.5], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [2554.6], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [2536.75], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [2533.55], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [2531.85], + + "os-odl-sfc-ha:huawei-pod2:compass": [2531.7], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [2531.2], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [2531], + + "os-nosdn-bar-ha:huawei-pod2:compass": [2529.6], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [2520.5], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [2481.15], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [2474], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [2472.6], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [2471], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [2470.6], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [2464.15], + + "os-odl-sfc-noha:huawei-virtual4:compass": [2455.9], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [2455.3], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [2446.85], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [2444.75], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [2430.9], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [2421.3], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [2415.7], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [2399.4], + + "os-odl-sfc-ha:huawei-virtual3:compass": [2391.85], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [2391.45], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [2380.7], + + "os-odl-sfc-ha:huawei-virtual4:compass": [2379.6], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [2371.9], + + "os-odl-sfc-noha:huawei-virtual3:compass": [2364.6], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [2363.4], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [2362], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [2358.5], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [2358.45], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [2336], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [2326.6], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [2324.95], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [2320.2], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [2318.5], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [2312.8], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [2311.7], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [2301.15], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [2297.7], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [2232.8], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [2232.1], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [2230], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [2154], + + "os-odl-sfc-ha:huawei-virtual8:compass": [2150.1], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [2004.3], + + "os-odl-nofeature-ha:arm-pod5:fuel": [1754.5], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [1754.15], + + "os-odl-nofeature-ha:arm-pod6:fuel": [716.15], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [716.05] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc014_scenario.png + :width: 800px + :alt: TC014 influence of scenario + +{ + + "os-nosdn-ovs-ha": [3725.5], + + "os-ovn-nofeature-noha": [3654.8], + + "os-nosdn-bar-noha": [3633.2], + + "os-odl-nofeature-ha": [3407.8], + + "os-nosdn-ovs-noha": [2583.2], + + "os-odl-nofeature-noha": [2578.9], + + "os-nosdn-nofeature-noha": [2553.2], + + "os-nosdn-nofeature-ha": [2532.8], + + "os-odl_l2-moon-ha": [2530.5], + + "os-nosdn-bar-ha": [2527], + + "os-odl_l3-nofeature-ha": [2501.5], + + "os-nosdn-ovs_dpdk-noha": [2473.65], + + "os-odl-sfc-ha": [2472.9], + + "os-odl_l2-moon-noha": [2470.8], + + "os-nosdn-ovs_dpdk-ha": [2461.9], + + "os-odl_l3-nofeature-noha": [2442.8], + + "os-nosdn-kvm-noha": [2392.9], + + "os-odl-sfc-noha": [2370.5], + + "os-nosdn-kvm-ha": [2358.5], + + "os-nosdn-openbaton-ha": [2231.8] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc014_pod.png + :width: 800px + :alt: TC014 influence of the POD + +{ + + "lf-pod2": [3723.95], + + "lf-pod1": [3669], + + "intel-pod5": [3388.6], + + "intel-pod18": [3298.4], + + "flex-pod2": [3208.6], + + "ericsson-virtual1": [2988.9], + + "ericsson-pod1": [2669.1], + + "ericsson-virtual4": [2598.5], + + "ericsson-virtual3": [2553.15], + + "huawei-pod2": [2531.2], + + "ericsson-virtual2": [2526.9], + + "huawei-virtual4": [2407.4], + + "huawei-virtual3": [2374.6], + + "huawei-virtual2": [2326.4], + + "huawei-virtual9": [2324.95], + + "huawei-virtual1": [2302.6], + + "huawei-pod12": [2232.2], + + "huawei-virtual8": [2085.3], + + "arm-pod5": [1754.4], + + "arm-pod6": [716.15] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc069-memory-write-bandwidth.rst b/docs/release/results/tc069-memory-write-bandwidth.rst new file mode 100644 index 000000000..06e2ec922 --- /dev/null +++ b/docs/release/results/tc069-memory-write-bandwidth.rst @@ -0,0 +1,300 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +============================================= +Test results for TC069 memory write bandwidth +============================================= + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC069 measures the maximum possible cache and memory performance while reading and writing certain +blocks of data (starting from 1Kb and further in power of 2) continuously through ALU and FPU +respectively. Measure different aspects of memory performance via synthetic simulations. +Each simulation consists of four performances (Copy, Scale, Add, Triad). +The test results shown below are for writing 32MB integer block size. + +Metric: memory write bandwidth +Unit: MBps + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-nosdn-nofeature-noha:intel-pod18:joid": [20113.395], + + "os-nosdn-openbaton-ha:intel-pod18:joid": [19183.58], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [17851.35], + + "os-nosdn-nofeature-noha:intel-pod5:joid": [16312.37], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [15633.245], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [13332.065], + + "os-odl-nofeature-ha:arm-pod6:fuel": [13327.02], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [9462.74], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [9384.585], + + "os-odl-nofeature-ha:ericsson-pod1:fuel": [9235.98], + + "os-nosdn-nofeature-noha:huawei-pod12:joid": [9213.6], + + "os-nosdn-openbaton-ha:huawei-pod12:joid": [9152.18], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [9079.45], + + "os-odl_l2-moon-ha:huawei-pod2:compass": [9071.13], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [9068.06], + + "os-odl-sfc-ha:huawei-pod2:compass": [9031.24], + + "os-odl_l3-nofeature-ha:huawei-pod2:compass": [9019.53], + + "os-nosdn-bar-ha:huawei-pod2:compass": [8977.3], + + "os-nosdn-ovs_dpdk-ha:huawei-pod2:compass": [8960.635], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [8825.805], + + "os-nosdn-kvm-ha:huawei-pod2:compass": [8282.75], + + "os-odl_l2-moon-noha:huawei-virtual4:compass": [8116.33], + + "os-nosdn-ovs-noha:ericsson-virtual4:fuel": [8083.97], + + "os-odl_l2-moon-noha:huawei-virtual3:compass": [8083.52], + + "os-nosdn-nofeature-noha:huawei-virtual3:compass": [7799.145], + + "os-odl_l3-nofeature-noha:huawei-virtual3:compass": [7776.12], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual3:compass": [7680.37], + + "os-nosdn-ovs-noha:ericsson-virtual1:fuel": [7615.97], + + "os-nosdn-nofeature-noha:ericsson-virtual4:fuel": [7612.62], + + "os-nosdn-nofeature-noha:ericsson-virtual2:fuel": [7518.62], + + "os-nosdn-nofeature-noha:huawei-virtual2:compass": [7489.67], + + "os-nosdn-ovs-noha:ericsson-virtual2:fuel": [7478.57], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual4:compass": [7465.82], + + "os-nosdn-kvm-noha:huawei-virtual3:compass": [7443.16], + + "os-odl-nofeature-noha:ericsson-virtual4:fuel": [7442.855], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [7440.65], + + "os-odl-sfc-noha:huawei-virtual4:compass": [7401.16], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [7389.505], + + "os-odl-nofeature-ha:arm-pod5:fuel": [7385.76], + + "os-nosdn-nofeature-noha:huawei-virtual1:compass": [7382.345], + + "os-odl_l2-moon-ha:huawei-virtual3:compass": [7286.385], + + "os-odl_l3-nofeature-noha:huawei-virtual4:compass": [7272.06], + + "os-odl_l3-nofeature-ha:huawei-virtual4:compass": [7261.73], + + "os-nosdn-nofeature-noha:ericsson-virtual3:fuel": [7253.64], + + "os-odl-sfc-noha:huawei-virtual3:compass": [7247.89], + + "os-odl_l3-nofeature-ha:huawei-virtual2:compass": [7214.01], + + "os-nosdn-ovs_dpdk-ha:huawei-virtual3:compass": [7207.39], + + "os-nosdn-ovs_dpdk-noha:huawei-virtual4:compass": [7205.565], + + "os-nosdn-ovs-noha:ericsson-virtual3:fuel": [7201.005], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [7132.835], + + "os-odl-nofeature-noha:ericsson-virtual3:fuel": [7117.05], + + "os-odl_l3-nofeature-ha:huawei-virtual3:compass": [7064.18], + + "os-odl_l2-moon-ha:huawei-virtual4:compass": [6997.295], + + "os-odl-nofeature-ha:lf-pod1:apex": [6992.21], + + "os-odl-sfc-ha:huawei-virtual4:compass": [6975.63], + + "os-odl-nofeature-noha:lf-pod1:apex": [6972.63], + + "os-nosdn-nofeature-noha:lf-pod1:apex": [6955], + + "os-ovn-nofeature-noha:lf-pod1:apex": [6954.5], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [6953.35], + + "os-odl-sfc-noha:lf-pod1:apex": [6951.89], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [6932.29], + + "os-nosdn-nofeature-noha:huawei-virtual4:compass": [6929.54], + + "os-nosdn-kvm-noha:huawei-virtual4:compass": [6921.6], + + "os-nosdn-ovs-ha:lf-pod2:fuel": [6913.355], + + "os-odl-nofeature-ha:lf-pod2:fuel": [6848.58], + + "os-odl-sfc-ha:lf-pod1:apex": [6818.74], + + "os-nosdn-bar-noha:lf-pod1:apex": [6812.16], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [6808.18], + + "os-odl-nofeature-noha:ericsson-virtual2:fuel": [6807.565], + + "os-nosdn-bar-ha:lf-pod1:apex": [6774.76], + + "os-nosdn-bar-ha:huawei-virtual4:compass": [6759.4], + + "os-nosdn-nofeature-noha:huawei-virtual8:compass": [6756.9], + + "os-nosdn-bar-ha:huawei-virtual3:compass": [6543.46], + + "os-nosdn-kvm-ha:huawei-virtual3:compass": [6504.34], + + "os-odl-sfc-ha:huawei-virtual3:compass": [6481.005], + + "os-nosdn-kvm-ha:huawei-virtual4:compass": [6461.5], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [6152.375], + + "os-odl-sfc-ha:huawei-virtual8:compass": [5941.7], + + "os-nosdn-kvm-noha:huawei-virtual8:compass": [4564.515] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc069_scenario.png + :width: 800px + :alt: TC069 influence of scenario + +{ + + "os-nosdn-openbaton-ha": [9187.16], + + "os-odl_l2-moon-ha": [9010.57], + + "os-nosdn-nofeature-ha": [8886.75], + + "os-odl_l3-nofeature-ha": [8779.67], + + "os-odl_l2-moon-noha": [8114.995], + + "os-nosdn-ovs_dpdk-ha": [7864.07], + + "os-odl_l3-nofeature-noha": [7632.11], + + "os-odl-sfc-ha": [7624.67], + + "os-nosdn-nofeature-noha": [7470.66], + + "os-odl-nofeature-ha": [7372.23], + + "os-nosdn-ovs_dpdk-noha": [7311.54], + + "os-odl-sfc-noha": [7300.56], + + "os-nosdn-ovs-noha": [7280.005], + + "os-odl-nofeature-noha": [7162.67], + + "os-nosdn-kvm-ha": [7130.775], + + "os-nosdn-kvm-noha": [7041.13], + + "os-ovn-nofeature-noha": [6954.5], + + "os-nosdn-ovs-ha": [6913.355], + + "os-nosdn-bar-ha": [6829.17], + + "os-nosdn-bar-noha": [6812.16] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc069_pod.png + :width: 800px + :alt: TC069 influence of the POD + +{ + + "intel-pod18": [18871.79], + + "intel-pod5": [16055.79], + + "arm-pod6": [13327.02], + + "flex-pod2": [9384.585], + + "ericsson-pod1": [9331.535], + + "huawei-pod12": [9164.88], + + "huawei-pod2": [9026.52], + + "huawei-virtual9": [8825.805], + + "ericsson-virtual1": [7615.97], + + "ericsson-virtual4": [7539.23], + + "arm-pod5": [7403.38], + + "huawei-virtual3": [7247.89], + + "huawei-virtual2": [7205.35], + + "huawei-virtual1": [7196.405], + + "ericsson-virtual3": [7173.72], + + "huawei-virtual4": [7131.47], + + "ericsson-virtual2": [7129.08], + + "lf-pod1": [6928.18], + + "lf-pod2": [6875.88], + + "huawei-virtual8": [5729.705] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc082-context-switches-under-load.rst b/docs/release/results/tc082-context-switches-under-load.rst new file mode 100644 index 000000000..d8a9f5493 --- /dev/null +++ b/docs/release/results/tc082-context-switches-under-load.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +================================================== +Test results for TC082 context switches under load +================================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC082 measures various software performance events using perf. +The test results shown below are for context-switches. + +Metric: context switches +Unit: N/A + + +Euphrates release +----------------- + +Test results per scenario and pod (lower is better): + +{ + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [316], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [340], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [357.5], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [384], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [394.5], + + "os-nosdn-nofeature-ha:lf-pod1:apex": [435], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [476], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [518], + + "os-odl-nofeature-ha:arm-pod5:fuel": [863], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [871], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [1002], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [1174], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [1239], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [1430], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [1489], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [1883.5] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc082_scenario.png + :width: 800px + :alt: TC082 influence of scenario + +the influence of the scenario + +{ + + "os-nosdn-nofeature-ha": [505], + + "os-odl-nofeature-ha": [863] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc082_pod.png + :width: 800px + :alt: TC082 influence of the POD + +the influence of the POD + +{ + + "huawei-pod12": [316], + + "intel-pod18": [340], + + "intel-pod5": [357.5], + + "ericsson-pod1": [384], + + "lf-pod2": [394.5], + + "lf-pod1": [435], + + "flex-pod2": [476], + + "huawei-pod2": [518], + + "arm-pod5": [869.5], + + "huawei-virtual9": [1002], + + "huawei-virtual4": [1174], + + "huawei-virtual3": [1239], + + "huawei-virtual2": [1430], + + "huawei-virtual1": [1489], + + "arm-pod6": [1883.5] + +} + + +Fraser release +-------------- diff --git a/docs/release/results/tc083-network-throughput-between-vm.rst b/docs/release/results/tc083-network-throughput-between-vm.rst new file mode 100644 index 000000000..f846571a5 --- /dev/null +++ b/docs/release/results/tc083-network-throughput-between-vm.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 + + +===================================================== +Test results for TC083 network throughput between VMs +===================================================== + +.. toctree:: + :maxdepth: 2 + + +Overview of test case +===================== + +TC083 measures network latency and throughput between VMs using netperf. +The test results shown below are for UDP throughout. + +Metric: UDP stream throughput +Unit: 10^6bits/s + + +Euphrates release +----------------- + +Test results per scenario and pod (higher is better): + +{ + + "os-nosdn-nofeature-ha:lf-pod1:apex": [2204.42], + + "os-nosdn-nofeature-ha:intel-pod18:joid": [1835.55], + + "os-nosdn-nofeature-ha:lf-pod2:fuel": [1676.705], + + "os-nosdn-nofeature-ha:intel-pod5:joid": [1612.555], + + "os-nosdn-nofeature-ha:flex-pod2:apex": [1370.23], + + "os-nosdn-nofeature-ha:huawei-pod12:joid": [1300.12], + + "os-nosdn-nofeature-ha:huawei-pod2:compass": [1070.455], + + "os-nosdn-nofeature-ha:ericsson-pod1:fuel": [1004.32], + + "os-nosdn-nofeature-ha:huawei-virtual9:compass": [753.46], + + "os-nosdn-nofeature-ha:huawei-virtual4:compass": [735.07], + + "os-odl-nofeature-ha:arm-pod5:fuel": [531.63], + + "os-nosdn-nofeature-ha:huawei-virtual3:compass": [493.985], + + "os-nosdn-nofeature-ha:arm-pod5:fuel": [448.82], + + "os-nosdn-nofeature-ha:arm-pod6:fuel": [193.43], + + "os-nosdn-nofeature-ha:huawei-virtual1:compass": [189.99], + + "os-nosdn-nofeature-ha:huawei-virtual2:compass": [80.15] + +} + + +The influence of the scenario +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc083_scenario.png + :width: 800px + :alt: TC083 influence of scenario + +the influence of the scenario + +{ + + "os-nosdn-nofeature-ha": [1109.12], + + "os-odl-nofeature-ha": [531.63] + +} + + +The influence of the POD +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. image:: images/tc083_pod.png + :width: 800px + :alt: TC083 influence of the POD + +the influence of the POD + +{ + + "lf-pod1": [2204.42], + + "intel-pod18": [1835.55], + + "lf-pod2": [1676.705], + + "intel-pod5": [1612.555], + + "flex-pod2": [1370.23], + + "huawei-pod12": [1300.12], + + "huawei-pod2": [1070.455], + + "ericsson-pod1": [1004.32], + + "huawei-virtual9": [753.46], + + "huawei-virtual4": [735.07], + + "huawei-virtual3": [493.985], + + "arm-pod5": [451.38], + + "arm-pod6": [193.43], + + "huawei-virtual1": [189.99], + + "huawei-virtual2": [80.15] + +} + + +Fraser release +-------------- diff --git a/docs/testing/developer/devguide/devguide.rst b/docs/testing/developer/devguide/devguide.rst index dade49b75..04d5350be 100755 --- a/docs/testing/developer/devguide/devguide.rst +++ b/docs/testing/developer/devguide/devguide.rst @@ -432,7 +432,8 @@ Yardstick committers and contributors to review your codes. :width: 800px :alt: Gerrit for code review -You can find Yardstick people info `here <https://wiki.opnfv.org/display/yardstick/People>`_. +You can find a list Yardstick people `here <https://wiki.opnfv.org/display/yardstick/People>`_, +or use the ``yardstick-reviewers`` and ``yardstick-committers`` groups in gerrit. Modify the code under review in Gerrit ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/docs/testing/user/userguide/13-nsb-installation.rst b/docs/testing/user/userguide/13-nsb-installation.rst index 1f6c79b0b..3e0ed0bfb 100644 --- a/docs/testing/user/userguide/13-nsb-installation.rst +++ b/docs/testing/user/userguide/13-nsb-installation.rst @@ -1058,40 +1058,8 @@ IxLoad Config ``pod_ixia.yaml`` - .. code-block:: yaml - - nodes: - - - name: trafficgen_1 - role: IxNet - ip: 1.2.1.1 #ixia machine ip - user: user - password: r00t - key_filename: /root/.ssh/id_rsa - tg_config: - ixchassis: "1.2.1.7" #ixia chassis ip - tcl_port: "8009" # tcl server port - lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" - root_dir: "/opt/ixia/ixos-api/8.01.0.2/" - py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" - dut_result_dir: "/mnt/ixia" - version: 8.1 - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "2:5" # Card:port - driver: "none" - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.0.0" - local_mac: "00:98:10:64:14:00" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "2:6" # [(Card, port)] - driver: "none" - dpdk_port_num: 1 - local_ip: "152.40.40.20" - netmask: "255.255.0.0" - local_mac: "00:98:28:28:14:00" + .. literalinclude:: code/pod_ixia.yaml + :language: console for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration @@ -1113,10 +1081,10 @@ IxLoad IxNetwork --------- -1. Software needed: ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` - (Download from ixia support site) - Install - ``IxNetworkAPI<ixnetwork verson>Linux64.bin.tgz`` -2. Update pod_ixia.yaml file with ixia details. +IxNetwork testcases use IxNetwork API Python Bindings module, which is +installed as part of the requirements of the project. + +1. Update ``pod_ixia.yaml`` file with ixia details. .. code-block:: console @@ -1124,44 +1092,12 @@ IxNetwork Config pod_ixia.yaml - .. code-block:: yaml - - nodes: - - - name: trafficgen_1 - role: IxNet - ip: 1.2.1.1 #ixia machine ip - user: user - password: r00t - key_filename: /root/.ssh/id_rsa - tg_config: - ixchassis: "1.2.1.7" #ixia chassis ip - tcl_port: "8009" # tcl server port - lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" - root_dir: "/opt/ixia/ixos-api/8.01.0.2/" - py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" - dut_result_dir: "/mnt/ixia" - version: 8.1 - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "2:5" # Card:port - driver: "none" - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.0.0" - local_mac: "00:98:10:64:14:00" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "2:6" # [(Card, port)] - driver: "none" - dpdk_port_num: 1 - local_ip: "152.40.40.20" - netmask: "255.255.0.0" - local_mac: "00:98:28:28:14:00" + .. literalinclude:: code/pod_ixia.yaml + :language: console for sriov/ovs_dpdk pod files, please refer to above Standalone Virtualization for ovs-dpdk/sriov configuration -3. Start IxNetwork TCL Server +2. Start IxNetwork TCL Server You will also need to configure the IxNetwork machine to start the IXIA IxNetworkTclServer. This can be started like so: @@ -1170,6 +1106,5 @@ IxNetwork ``Start->Programs->Ixia->IxNetwork->IxNetwork 7.21.893.14 GA->IxNetworkTclServer`` (or ``IxNetworkApiServer``) -4. Execute testcase in samplevnf folder e.g. +3. Execute testcase in samplevnf folder e.g. ``<repo>/samples/vnf_samples/nsut/vfw/tc_baremetal_rfc2544_ipv4_1rule_1flow_64B_ixia.yaml`` - diff --git a/docs/testing/user/userguide/code/pod_ixia.yaml b/docs/testing/user/userguide/code/pod_ixia.yaml new file mode 100644 index 000000000..4ab56fe4e --- /dev/null +++ b/docs/testing/user/userguide/code/pod_ixia.yaml @@ -0,0 +1,31 @@ +nodes: +- + name: trafficgen_1 + role: IxNet + ip: 1.2.1.1 #ixia machine ip + user: user + password: r00t + key_filename: /root/.ssh/id_rsa + tg_config: + ixchassis: "1.2.1.7" #ixia chassis ip + tcl_port: "8009" # tcl server port + lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" + root_dir: "/opt/ixia/ixos-api/8.01.0.2/" + py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" + dut_result_dir: "/mnt/ixia" + version: 8.1 + interfaces: + xe0: # logical name from topology.yaml and vnfd.yaml + vpci: "2:5" # Card:port + driver: "none" + dpdk_port_num: 0 + local_ip: "152.16.100.20" + netmask: "255.255.0.0" + local_mac: "00:98:10:64:14:00" + xe1: # logical name from topology.yaml and vnfd.yaml + vpci: "2:6" # [(Card, port)] + driver: "none" + dpdk_port_num: 1 + local_ip: "152.40.40.20" + netmask: "255.255.0.0" + local_mac: "00:98:28:28:14:00" diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc088.rst b/docs/testing/user/userguide/opnfv_yardstick_tc088.rst new file mode 100644 index 000000000..2423a6b31 --- /dev/null +++ b/docs/testing/user/userguide/opnfv_yardstick_tc088.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Yin Kanglin and others. +.. 14_ykl@tongji.edu.cn + +************************************* +Yardstick Test Case Description TC088 +************************************* + ++-----------------------------------------------------------------------------+ +|Control Node Openstack Service High Availability - Nova Scheduler | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC088: Control node Openstack service down - | +| | nova scheduler | ++--------------+--------------------------------------------------------------+ +|test purpose | This test case will verify the high availability of the | +| | compute scheduler service provided by OpenStack (nova- | +| | scheduler) on control node. | +| | | ++--------------+--------------------------------------------------------------+ +|test method | This test case kills the processes of nova-scheduler service | +| | on a selected control node, then checks whether the request | +| | of the related OpenStack command is OK and the killed | +| | processes are recovered. | +| | | ++--------------+--------------------------------------------------------------+ +|attackers | In this test case, an attacker called "kill-process" is | +| | needed. This attacker includes three parameters: | +| | 1) fault_type: which is used for finding the attacker's | +| | scripts. It should be always set to "kill-process" in this | +| | test case. | +| | 2) process_name: which is the process name of the specified | +| | OpenStack service. If there are multiple processes use the | +| | same name on the host, all of them are killed by this | +| | attacker. | +| | In this case. This parameter should always set to "nova- | +| | scheduler". | +| | 3) host: which is the name of a control node being attacked. | +| | | +| | e.g. | +| | -fault_type: "kill-process" | +| | -process_name: "nova-scheduler" | +| | -host: node1 | +| | | ++--------------+--------------------------------------------------------------+ +|monitors | In this test case, one kind of monitor is needed: | +| | 1. the "process" monitor check whether a process is running | +| | on a specific node, which needs three parameters: | +| | 1) monitor_type: which used for finding the monitor class and| +| | related scripts. It should be always set to "process" | +| | for this monitor. | +| | 2) process_name: which is the process name for monitor | +| | 3) host: which is the name of the node running the process | +| | | +| | e.g. | +| | monitor: | +| | -monitor_type: "process" | +| | -process_name: "nova-scheduler" | +| | -host: node1 | +| | | ++--------------+--------------------------------------------------------------+ +|operations | In this test case, the following operations are needed: | +| | 1. "nova-create-instance": create a VM instance to check | +| | whether the nova-scheduler works normally. | +| | | ++--------------+--------------------------------------------------------------+ +|metrics | In this test case, there are one metric: | +| | 1)process_recover_time: which indicates the maximum time | +| | (seconds) from the process being killed to recovered | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | Developed by the project. Please see folder: | +| | "yardstick/benchmark/scenarios/availability/ha_tools" | +| | | ++--------------+--------------------------------------------------------------+ +|references | ETSI NFV REL001 | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | This test case needs two configuration files: | +| | 1) test case file: opnfv_yardstick_tc088.yaml | +| | -Attackers: see above "attackers" description | +| | -waiting_time: which is the time (seconds) from the process | +| | being killed to stopping monitors the monitors | +| | -Monitors: see above "monitors" description | +| | -SLA: see above "metrics" description | +| | | +| | 2)POD file: pod.yaml | +| | The POD configuration should record on pod.yaml first. | +| | the "host" item in this test case will use the node name in | +| | the pod.yaml. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | do attacker: connect the host through SSH, and then execute | +| | the kill process script with param value specified by | +| | "process_name" | +| | | +| | Result: Process will be killed. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | start monitors: | +| | each monitor will run with independently process | +| | | +| | Result: The monitor info will be collected. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | create a new instance to check whether the nova scheduler | +| | works normally. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | stop the monitor after a period of time specified by | +| | "waiting_time" | +| | | +| | Result: The monitor info will be aggregated. | +| | | ++--------------+--------------------------------------------------------------+ +|post-action | It is the action when the test cases exist. It will check the| +| | status of the specified process on the host, and restart the | +| | process if it is not running for next test cases | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Fails only if SLA is not passed, or if there is a test case | +| | execution problem. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/docs/testing/user/userguide/opnfv_yardstick_tc089.rst b/docs/testing/user/userguide/opnfv_yardstick_tc089.rst new file mode 100644 index 000000000..0a8b2570b --- /dev/null +++ b/docs/testing/user/userguide/opnfv_yardstick_tc089.rst @@ -0,0 +1,129 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Yin Kanglin and others. +.. 14_ykl@tongji.edu.cn + +************************************* +Yardstick Test Case Description TC089 +************************************* + ++-----------------------------------------------------------------------------+ +|Control Node Openstack Service High Availability - Nova Conductor | +| | ++--------------+--------------------------------------------------------------+ +|test case id | OPNFV_YARDSTICK_TC089: Control node Openstack service down - | +| | nova conductor | ++--------------+--------------------------------------------------------------+ +|test purpose | This test case will verify the high availability of the | +| | compute database proxy service provided by OpenStack (nova- | +| | conductor) on control node. | +| | | ++--------------+--------------------------------------------------------------+ +|test method | This test case kills the processes of nova-conductor service | +| | on a selected control node, then checks whether the request | +| | of the related OpenStack command is OK and the killed | +| | processes are recovered. | +| | | ++--------------+--------------------------------------------------------------+ +|attackers | In this test case, an attacker called "kill-process" is | +| | needed. This attacker includes three parameters: | +| | 1) fault_type: which is used for finding the attacker's | +| | scripts. It should be always set to "kill-process" in this | +| | test case. | +| | 2) process_name: which is the process name of the specified | +| | OpenStack service. If there are multiple processes use the | +| | same name on the host, all of them are killed by this | +| | attacker. | +| | In this case. This parameter should always set to "nova- | +| | conductor". | +| | 3) host: which is the name of a control node being attacked. | +| | | +| | e.g. | +| | -fault_type: "kill-process" | +| | -process_name: "nova-conductor" | +| | -host: node1 | +| | | ++--------------+--------------------------------------------------------------+ +|monitors | In this test case, one kind of monitor is needed: | +| | 1. the "process" monitor check whether a process is running | +| | on a specific node, which needs three parameters: | +| | 1) monitor_type: which used for finding the monitor class and| +| | related scripts. It should be always set to "process" | +| | for this monitor. | +| | 2) process_name: which is the process name for monitor | +| | 3) host: which is the name of the node running the process | +| | | +| | e.g. | +| | monitor: | +| | -monitor_type: "process" | +| | -process_name: "nova-conductor" | +| | -host: node1 | +| | | ++--------------+--------------------------------------------------------------+ +|operations | In this test case, the following operations are needed: | +| | 1. "nova-create-instance": create a VM instance to check | +| | whether the nova-conductor works normally. | +| | | ++--------------+--------------------------------------------------------------+ +|metrics | In this test case, there are one metric: | +| | 1)process_recover_time: which indicates the maximum time | +| | (seconds) from the process being killed to recovered | +| | | ++--------------+--------------------------------------------------------------+ +|test tool | Developed by the project. Please see folder: | +| | "yardstick/benchmark/scenarios/availability/ha_tools" | +| | | ++--------------+--------------------------------------------------------------+ +|references | ETSI NFV REL001 | +| | | ++--------------+--------------------------------------------------------------+ +|configuration | This test case needs two configuration files: | +| | 1) test case file: opnfv_yardstick_tc089.yaml | +| | -Attackers: see above "attackers" description | +| | -waiting_time: which is the time (seconds) from the process | +| | being killed to stopping monitors the monitors | +| | -Monitors: see above "monitors" description | +| | -SLA: see above "metrics" description | +| | | +| | 2)POD file: pod.yaml | +| | The POD configuration should record on pod.yaml first. | +| | the "host" item in this test case will use the node name in | +| | the pod.yaml. | +| | | ++--------------+--------------------------------------------------------------+ +|test sequence | description and expected result | +| | | ++--------------+--------------------------------------------------------------+ +|step 1 | do attacker: connect the host through SSH, and then execute | +| | the kill process script with param value specified by | +| | "process_name" | +| | | +| | Result: Process will be killed. | +| | | ++--------------+--------------------------------------------------------------+ +|step 2 | start monitors: | +| | each monitor will run with independently process | +| | | +| | Result: The monitor info will be collected. | +| | | ++--------------+--------------------------------------------------------------+ +|step 3 | create a new instance to check whether the nova conductor | +| | works normally. | +| | | ++--------------+--------------------------------------------------------------+ +|step 4 | stop the monitor after a period of time specified by | +| | "waiting_time" | +| | | +| | Result: The monitor info will be aggregated. | +| | | ++--------------+--------------------------------------------------------------+ +|post-action | It is the action when the test cases exist. It will check the| +| | status of the specified process on the host, and restart the | +| | process if it is not running for next test cases | +| | | ++--------------+--------------------------------------------------------------+ +|test verdict | Fails only if SLA is not passed, or if there is a test case | +| | execution problem. | +| | | ++--------------+--------------------------------------------------------------+ diff --git a/etc/yardstick/nodes/apex_baremetal/pod.yaml b/etc/yardstick/nodes/apex_baremetal/pod.yaml new file mode 100644 index 000000000..4b058c499 --- /dev/null +++ b/etc/yardstick/nodes/apex_baremetal/pod.yaml @@ -0,0 +1,46 @@ +############################################################################## +# Copyright (c) 2018 Intracom Telecom and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## +--- +nodes: +- + name: node1 + role: Controller + ip: ip1 + user: heat-admin + key_filename: node_keyfile +- + name: node2 + role: Controller + ip: ip2 + user: heat-admin + key_filename: node_keyfile +- + name: node3 + role: Controller + ip: ip3 + user: heat-admin + key_filename: node_keyfile +- + name: node4 + role: Compute + ip: ip4 + user: heat-admin + key_filename: node_keyfile +- + name: node5 + role: Compute + ip: ip5 + user: heat-admin + key_filename: node_keyfile +- + name: node6 + role: Opendaylight-Cluster-Leader + ip: ip6 + user: heat-admin + key_filename: node_keyfile diff --git a/etc/yardstick/nodes/apex_virtual/pod.yaml b/etc/yardstick/nodes/apex_virtual/pod.yaml new file mode 100644 index 000000000..59b51d224 --- /dev/null +++ b/etc/yardstick/nodes/apex_virtual/pod.yaml @@ -0,0 +1,40 @@ +############################################################################## +# Copyright (c) 2018 Intracom Telecom and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## +--- +nodes: +- + name: node1 + role: Controller + ip: 192.0.2.15 + user: heat-admin + key_filename: /root/.ssh/id_rsa +- + name: node2 + role: Controller + ip: 192.0.2.4 + user: heat-admin + key_filename: /root/.ssh/id_rsa +- + name: node3 + role: Controller + ip: 192.0.2.6 + user: heat-admin + key_filename: /root/.ssh/id_rsa +- + name: node4 + role: Compute + ip: 192.0.2.10 + user: heat-admin + key_filename: /root/.ssh/id_rsa +- + name: node5 + role: Compute + ip: 192.0.2.14 + user: heat-admin + key_filename: /root/.ssh/id_rsa diff --git a/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia b/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia index 57a83058e..1f755dc4e 100644 --- a/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia +++ b/etc/yardstick/nodes/pod.yaml.nsb.sample.ixia @@ -26,7 +26,6 @@ nodes: lib_path: "/opt/ixia/ixos-api/8.01.0.2/lib/ixTcl1.0" root_dir: "/opt/ixia/ixos-api/8.01.0.2/" py_bin_path: "/opt/ixia/ixload/8.01.106.3/bin/" - py_lib_path: "/opt/ixia/ixnetwork/8.01.1029.14/lib/PythonApi" dut_result_dir: "/mnt/ixia" version: 8.1 interfaces: diff --git a/etc/yardstick/nodes/standalone/ixia_correlated_template.yaml b/etc/yardstick/nodes/standalone/ixia_correlated_template.yaml index 7250c4ce3..ef63ea04c 100644 --- a/etc/yardstick/nodes/standalone/ixia_correlated_template.yaml +++ b/etc/yardstick/nodes/standalone/ixia_correlated_template.yaml @@ -26,13 +26,12 @@ nodes: user: {{gen.user}} password: {{gen.password}} key_filename: {{gen.key_filename}} - tg_config: + tg_config: ixchassis: "{{gen.tg_config.ixchassis}}" #ixia chassis ip tcl_port: "{{gen.tg_config.tcl_port}}" # tcl server port lib_path: "{{gen.tg_config.lib_path}}" root_dir: "{{gen.tg_config.root_dir}}" py_bin_path: "{{gen.tg_config.py_bin_path}}" - py_lib_path: "{{gen.tg_config.py_lib_path}}" dut_result_dir: "{{gen.tg_config.dut_result_dir}}" version: "{{gen.tg_config.version}}" interfaces: diff --git a/etc/yardstick/nodes/standalone/ixia_template.yaml b/etc/yardstick/nodes/standalone/ixia_template.yaml index 617a65162..98ed8c5c2 100644 --- a/etc/yardstick/nodes/standalone/ixia_template.yaml +++ b/etc/yardstick/nodes/standalone/ixia_template.yaml @@ -32,7 +32,6 @@ nodes: lib_path: "{{gen.tg_config.lib_path}}" root_dir: "{{gen.tg_config.root_dir}}" py_bin_path: "{{gen.tg_config.py_bin_path}}" - py_lib_path: "{{gen.tg_config.py_lib_path}}" dut_result_dir: "{{gen.tg_config.dut_result_dir}}" version: "{{gen.tg_config.version}}" interfaces: diff --git a/nsb_setup.sh b/nsb_setup.sh index 50fc017d1..86796c4d4 100755 --- a/nsb_setup.sh +++ b/nsb_setup.sh @@ -67,8 +67,16 @@ pip install ansible==2.4.2 shade==1.22.2 docker-py==1.10.6 ANSIBLE_SCRIPTS="ansible" +if [[ -n ${1} ]]; then + yardstick_docker_image="-e yardstick_docker_image=${1}" +else + yardstick_docker_image="" +fi + +# no quotes for yardstick_docker_image so when empty it is removed as whitespace cd ${ANSIBLE_SCRIPTS} &&\ ansible-playbook \ -e img_property="nsb" \ + ${yardstick_docker_image} \ -e YARD_IMG_ARCH='amd64' ${extra_args}\ -i yardstick-install-inventory.ini nsb_setup.yml diff --git a/requirements.txt b/requirements.txt index 43f0e796c..4679bc8fb 100644 --- a/requirements.txt +++ b/requirements.txt @@ -26,6 +26,7 @@ flask==0.11.1 # BSD; OSI Approved BSD License functools32==3.2.3.post2; python_version <= "2.7" # PSF license futures==3.1.1;python_version=='2.7' # BSD; OSI Approved BSD License influxdb==4.1.1 # MIT License; OSI Approved MIT License +IxNetwork==8.40.1124.9 # MIT License; OSI Approved MIT License jinja2schema==0.1.4 # OSI Approved BSD License keystoneauth1==3.1.0 # OSI Approved Apache Software License kubernetes==3.0.0a1 # OSI Approved Apache Software License diff --git a/samples/test_suite.yaml b/samples/test_suite.yaml index 9a766b06a..6f5f53b46 100644 --- a/samples/test_suite.yaml +++ b/samples/test_suite.yaml @@ -20,7 +20,8 @@ test_cases: file_name: ping.yaml - file_name: ping-template.yaml - task_args: '{"packetsize": "200"}' + task_args: + default: '{"packetsize": "200"}' - file_name: ping-template.yaml task_args_file: "/tmp/test-args-file.json" diff --git a/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-2.cfg b/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-2.cfg index 192f2f89a..ba0055321 100644 --- a/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-2.cfg +++ b/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-2.cfg @@ -49,7 +49,7 @@ mode=gen tx port=p0 bps=1250000000 ; Ethernet + IP + UDP -pkt inline=${sut_mac0} 3c fd fe 9f a3 08 08 00 45 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b +pkt inline=${sut_mac0} 3c fd fe 9f a3 08 08 00 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b lat pos=38 [core 2] @@ -59,7 +59,7 @@ mode=gen tx port=p1 bps=1250000000 ; Ethernet + IP + UDP -pkt inline=${sut_mac1} 3c fd fe 9f a3 08 08 00 45 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b +pkt inline=${sut_mac1} 3c fd fe 9f a3 08 08 00 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b lat pos=38 [core 3] @@ -67,12 +67,10 @@ name=rec 0 task=0 mode=lat rx port=p0 -lat pos=38 [core 4] name=rec 0 task=0 mode=lat rx port=p1 -lat pos=38 diff --git a/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-4.cfg b/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-4.cfg index 0db21b681..41c31bf82 100644 --- a/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-4.cfg +++ b/samples/vnf_samples/nsut/prox/configs/gen_l2fwd-4.cfg @@ -61,7 +61,7 @@ mode=gen tx port=p0 bps=1250000000 ; Ethernet + IP + UDP -pkt inline=${sut_mac0} 3c fd fe 9f a3 08 08 00 45 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b +pkt inline=${sut_mac0} 3c fd fe 9f a3 08 08 00 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b lat pos=38 [core 2] @@ -71,7 +71,7 @@ mode=gen tx port=p1 bps=1250000000 ; Ethernet + IP + UDP -pkt inline=${sut_mac1} 3c fd fe 9f a3 08 08 00 45 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b +pkt inline=${sut_mac1} 3c fd fe 9f a3 08 08 00 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b lat pos=38 [core 3] @@ -81,7 +81,7 @@ mode=gen tx port=p2 bps=1250000000 ; Ethernet + IP + UDP -pkt inline=${sut_mac2} 3c fd fe 9f a5 08 08 00 45 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b +pkt inline=${sut_mac2} 3c fd fe 9f a5 08 08 00 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b lat pos=38 [core 4] @@ -91,7 +91,7 @@ mode=gen tx port=p3 bps=1250000000 ; Ethernet + IP + UDP -pkt inline=${sut_mac3} 3c fd fe 9f a5 08 08 00 45 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b +pkt inline=${sut_mac3} 3c fd fe 9f a5 08 08 00 45 00 00 1c 00 01 00 00 40 11 f7 7d c0 a8 01 01 c0 a8 01 01 13 88 13 88 00 08 55 7b lat pos=38 [core 5] @@ -99,25 +99,22 @@ name=rec 0 task=0 mode=lat rx port=p0 -lat pos=38 [core 6] name=rec 1 task=0 mode=lat rx port=p1 -lat pos=38 [core 7] name=rec 2 task=0 mode=lat rx port=p2 -lat pos=38 [core 8] name=rec 3 task=0 mode=lat rx port=p3 -lat pos=38
\ No newline at end of file + diff --git a/samples/vnf_samples/vnf_descriptors/ixia_rfc2544_tpl.yaml b/samples/vnf_samples/vnf_descriptors/ixia_rfc2544_tpl.yaml index 9b2a152f3..aca7c2102 100644 --- a/samples/vnf_samples/vnf_descriptors/ixia_rfc2544_tpl.yaml +++ b/samples/vnf_samples/vnf_descriptors/ixia_rfc2544_tpl.yaml @@ -29,7 +29,6 @@ vnfd:vnfd-catalog: tcl_port: '{{tg_config.tcl_port}}' # tcl server port lib_path: '{{tg_config.lib_path}}' root_dir: '{{tg_config.root_dir}}' - py_lib_path: '{{tg_config.py_lib_path}}' py_bin_path: '{{tg_config.py_bin_path}}' dut_result_dir: '{{tg_config.dut_result_dir}}' version: '{{tg_config.version}}' diff --git a/samples/vnf_samples/vnf_descriptors/tg_ixload.yaml b/samples/vnf_samples/vnf_descriptors/tg_ixload.yaml index ad4953fce..0324bb8fd 100644 --- a/samples/vnf_samples/vnf_descriptors/tg_ixload.yaml +++ b/samples/vnf_samples/vnf_descriptors/tg_ixload.yaml @@ -29,7 +29,6 @@ vnfd:vnfd-catalog: tcl_port: '{{tg_config.tcl_port}}' # tcl server port lib_path: '{{tg_config.lib_path}}' root_dir: '{{tg_config.root_dir}}' - py_lib_path: '{{tg_config.py_lib_path}}' py_bin_path: '{{tg_config.py_bin_path}}' dut_result_dir: '{{tg_config.dut_result_dir}}' version: '{{tg_config.version}}' diff --git a/samples/vnf_samples/vnf_descriptors/tg_ixload_4port.yaml b/samples/vnf_samples/vnf_descriptors/tg_ixload_4port.yaml index ffbfbdec0..def8cdcef 100644 --- a/samples/vnf_samples/vnf_descriptors/tg_ixload_4port.yaml +++ b/samples/vnf_samples/vnf_descriptors/tg_ixload_4port.yaml @@ -28,7 +28,6 @@ vnfd:vnfd-catalog: tcl_port: '{{tg_config.tcl_port}}' # tcl server port lib_path: '{{tg_config.lib_path}}' root_dir: '{{tg_config.root_dir}}' - py_lib_path: '{{tg_config.py_lib_path}}' dut_result_dir: '{{tg_config.dut_result_dir}}' version: '{{tg_config.version}}' vdu: diff --git a/tests/ci/prepare_env.sh b/tests/ci/prepare_env.sh index d7c60d48f..8b9f887b2 100755 --- a/tests/ci/prepare_env.sh +++ b/tests/ci/prepare_env.sh @@ -16,6 +16,7 @@ : ${EXTERNAL_NETWORK:='admin_floating_net'} : ${USER_NAME:='ubuntu'} : ${SSH_KEY:='/root/.ssh/id_rsa'} +: ${DEPLOY_SCENARIO:='unknown'} # Extract network name from EXTERNAL_NETWORK # e.g. EXTERNAL_NETWORK='ext-net;flat;192.168.0.2;192.168.0.253;192.168.0.1;192.168.0.0/24' @@ -62,7 +63,73 @@ verify_connectivity() { } ssh_options="-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no" +if [ "$INSTALLER_TYPE" == "apex" ]; then + # check the connection + verify_connectivity "${INSTALLER_IP}" + + pod_yaml="$YARDSTICK_REPO_DIR/etc/yardstick/nodes/apex_baremetal/pod.yaml" + + # update "ip" according to the CI env + ssh -l root "${INSTALLER_IP}" -i ${SSH_KEY} ${ssh_options} \ + "source /home/stack/stackrc && openstack server list -f yaml" > node_info + + controller_ips=($(awk '/control/{getline; {print $2}}' < node_info | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')) + compute_ips=($(awk '/compute/{getline; {print $2}}' < node_info | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')) + odl_ip="" + # Get ODL's cluster default module-shard Leader IP in HA scenario + if [[ ${DEPLOY_SCENARIO} == os-odl-*-ha ]]; then + for ip in "${controller_ips[@]}"; + do + if [[ "$odl_ip" ]]; then + break + fi + for ((i=0; i<${#controller_ips[@]}; i++)); + do + ODL_STATE=$(curl -s -u admin:admin -H "Accept: application/json" -H "Content-Type: application/json" \ + "http://"${ip}":8081/jolokia/read/org.opendaylight.controller:Category=Shards,name=member-"${i}"-shard-default-operational,type=DistributedOperationalDatastore" \ + | grep -o \"RaftState\"\:\"Leader\" | tr ":" "\n" | sed -n '2p' | sed 's/\"//g'); + + if [[ ${ODL_STATE} == "Leader" ]]; then + odl_ip=${ip} + break + fi + done; + done + + if [[ -z "$odl_ip" ]]; then + echo "ERROR: Opendaylight Leader IP is emtpy" + exit 1 + fi + + elif [[ ${DEPLOY_SCENARIO} == *"odl"* ]]; then + odl_ip=${controller_ips[0]} + fi + + if [[ ${controller_ips[0]} ]]; then + sed -i "s|ip1|${controller_ips[0]}|" "${pod_yaml}" + fi + if [[ ${controller_ips[1]} ]]; then + sed -i "s|ip2|${controller_ips[1]}|" "${pod_yaml}" + fi + if [[ ${controller_ips[2]} ]]; then + sed -i "s|ip3|${controller_ips[2]}|" "${pod_yaml}" + fi + if [[ ${compute_ips[0]} ]]; then + sed -i "s|ip4|${compute_ips[0]}|" "${pod_yaml}" + fi + if [[ ${compute_ips[1]} ]]; then + sed -i "s|ip5|${compute_ips[1]}|" "${pod_yaml}" + fi + if [[ ${odl_ip} ]]; then + sed -i "s|ip6|${odl_ip}|" "${pod_yaml}" + fi + + + # update 'key_filename' according to the CI env + sed -i "s|node_keyfile|${SSH_KEY}|" "${pod_yaml}" + +fi if [ "$INSTALLER_TYPE" == "fuel" ]; then # check the connection diff --git a/tests/opnfv/test_cases/opnfv_yardstick_tc088.yaml b/tests/opnfv/test_cases/opnfv_yardstick_tc088.yaml new file mode 100644 index 000000000..c2f1cbe33 --- /dev/null +++ b/tests/opnfv/test_cases/opnfv_yardstick_tc088.yaml @@ -0,0 +1,80 @@ +############################################################################## +# Copyright (c) 2017 14_ykl@tongji.edu.cn and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## +--- + +schema: "yardstick:task:0.1" +description: > + Yardstick TC088 config file; + HA test case: Control node Openstack service down - nova scheduler + +{% set file = file or '/etc/yardstick/pod.yaml' %} +{% set attack_host = attack_host or "node1" %} +{% set attack_process = attack_process or "nova-scheduler" %} +{% set inst_param = inst_param or "tc088 yardstick-image yardstick-flavor internal-network" %} +{% set inst_name = inst_name or "tc088" %} + +scenarios: + - + type: "GeneralHA" + options: + attackers: + - + fault_type: "kill-process" + host: {{attack_host}} + key: "kill-process" + process_name: "{{ attack_process }}" + + monitors: + - + monitor_type: "process" + key: "service-status" + process_name: "{{ attack_process }}" + host: {{attack_host}} + monitor_time: 30 + monitor_number: 3 + sla: + max_recover_time: 30 + + operations: + - + operation_type: "general-operation" + key: "nova-create-instance" + operation_key: "nova-create-instance" + action_parameter: + serverconfig: {{inst_param}} + rollback_parameter: + serverconfig: {{inst_name}} + + steps: + - + actionKey: "kill-process" + actionType: "attacker" + index: 1 + - + actionKey: "service-status" + actionType: "monitor" + index: 2 + - + actionKey: "nova-create-instance" + actionType: "operation" + index: 3 + + nodes: + {{attack_host}}: {{attack_host}}.LF + runner: + type: Duration + duration: 1 + sla: + outage_time: 5 + action: monitor + +context: + type: Node + name: LF + file: {{file}} diff --git a/tests/opnfv/test_cases/opnfv_yardstick_tc089.yaml b/tests/opnfv/test_cases/opnfv_yardstick_tc089.yaml new file mode 100644 index 000000000..d10650e03 --- /dev/null +++ b/tests/opnfv/test_cases/opnfv_yardstick_tc089.yaml @@ -0,0 +1,80 @@ +############################################################################## +# Copyright (c) 2017 14_ykl@tongji.edu.cn and others. +# +# All rights reserved. This program and the accompanying materials +# are made available under the terms of the Apache License, Version 2.0 +# which accompanies this distribution, and is available at +# http://www.apache.org/licenses/LICENSE-2.0 +############################################################################## +--- + +schema: "yardstick:task:0.1" +description: > + Yardstick TC089 config file; + HA test case: Control node Openstack service down - nova conductor + +{% set file = file or '/etc/yardstick/pod.yaml' %} +{% set attack_host = attack_host or "node1" %} +{% set attack_process = attack_process or "nova-conductor" %} +{% set inst_param = inst_param or "tc089 yardstick-image yardstick-flavor internal-network" %} +{% set inst_name = inst_name or "tc089" %} + +scenarios: + - + type: "GeneralHA" + options: + attackers: + - + fault_type: "kill-process" + host: {{attack_host}} + key: "kill-process" + process_name: "{{ attack_process }}" + + monitors: + - + monitor_type: "process" + key: "service-status" + process_name: "{{ attack_process }}" + host: {{attack_host}} + monitor_time: 30 + monitor_number: 3 + sla: + max_recover_time: 30 + + operations: + - + operation_type: "general-operation" + key: "nova-create-instance" + operation_key: "nova-create-instance" + action_parameter: + serverconfig: {{inst_param}} + rollback_parameter: + serverconfig: {{inst_name}} + + steps: + - + actionKey: "kill-process" + actionType: "attacker" + index: 1 + - + actionKey: "service-status" + actionType: "monitor" + index: 2 + - + actionKey: "nova-create-instance" + actionType: "operation" + index: 3 + + nodes: + {{attack_host}}: {{attack_host}}.LF + runner: + type: Duration + duration: 1 + sla: + outage_time: 5 + action: monitor + +context: + type: Node + name: LF + file: {{file}} diff --git a/tests/opnfv/test_cases/opnfv_yardstick_tc092.yaml b/tests/opnfv/test_cases/opnfv_yardstick_tc092.yaml new file mode 100644 index 000000000..85ec510df --- /dev/null +++ b/tests/opnfv/test_cases/opnfv_yardstick_tc092.yaml @@ -0,0 +1,276 @@ +############################################################################## +## Copyright (c) 2018 Intracom Telecom and others. +## +## All rights reserved. This program and the accompanying materials +## are made available under the terms of the Apache License, Version 2.0 +## which accompanies this distribution, and is available at +## http://www.apache.org/licenses/LICENSE-2.0 +############################################################################### +--- + +schema: "yardstick:task:0.1" +description: > + Yardstick TC092 config file; + SDN Controller resilience in HA configuration + +{% set file = file or '/etc/yardstick/pod.yaml' %} +{% set attack_host = attack_host or 'node6' %} + +scenarios: + +- + type: "GeneralHA" + options: + monitors: + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "snat" + monitor_time: 50 + host: athena + sla: + max_outage_time: 0 + parameter: + destination_ip: "8.8.8.8" + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "l2" + monitor_time: 50 + host: athena + sla: + max_outage_time: 0 + parameter: + destination_ip: "@private_ip" + + operations: + - operation_type: "general-operation" + key: "get-privateip" + operation_key: "get-privateip" + action_parameter: + server_name: "ares" + return_parameter: + all: "@private_ip" + + + steps: + - actionKey: "get-privateip" + actionType: "operation" + index: 1 + + - actionKey: "l2" + actionType: "monitor" + index: 2 + + - actionKey: "snat" + actionType: "monitor" + index: 3 + + + nodes: + {{attack_host}}: {{attack_host}}.LF + athena: athena.ODLHA1 + runner: + type: Duration + duration: 1 + sla: + action: monitor + +- + type: "GeneralHA" + options: + attackers: + - + fault_type: "kill-process" + process_name: "opendaylight" + key: "kill-process" + host: {{attack_host}} + + monitors: + - monitor_type: "process" + process_name: "opendaylight" + host: {{attack_host}} + key: "monitor-recovery" + monitor_time: 50 + sla: + max_recover_time: 30 + + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "snat" + monitor_time: 70 + host: athena + sla: + max_outage_time: 0 + parameter: + destination_ip: "8.8.8.8" + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "l2" + monitor_time: 70 + host: athena + sla: + max_outage_time: 0 + parameter: + destination_ip: "@private_ip" + + operations: + - operation_type: "general-operation" + key: "start-service" + host: {{attack_host}} + operation_key: "start-service" + action_parameter: + service: "opendaylight" + rollback_parameter: + service: "opendaylight" + + - operation_type: "general-operation" + key: "get-privateip" + operation_key: "get-privateip" + action_parameter: + server_name: "ares" + return_parameter: + all: "@private_ip" + + + + steps: + + - actionKey: "monitor-recovery" + actionType: "monitor" + index: 1 + + - actionKey: "get-privateip" + actionType: "operation" + index: 2 + + - actionKey: "l2" + actionType: "monitor" + index: 3 + + - actionKey: "snat" + actionType: "monitor" + index: 4 + + - actionKey: "kill-process" + actionType: "attacker" + index: 5 + + - actionKey: "start-service" + actionType: "operation" + index: 6 + + + + nodes: + {{attack_host}}: {{attack_host}}.LF + athena: athena.ODLHA1 + runner: + type: Duration + duration: 1 + sla: + action: monitor + +- + type: "GeneralHA" + options: + monitors: + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "l2" + monitor_time: 80 + host: athena + sla: + max_outage_time: 40 + parameter: + destination_ip: "@private_ip" + + operations: + - operation_type: "general-operation" + key: "get-privateip" + operation_key: "get-privateip" + action_parameter: + server_name: "hermes" + return_parameter: + all: "@private_ip" + + - operation_type: "general-operation" + key: "nova-create-instance" + operation_key: "nova-create-instance" + action_parameter: + serverconfig: "hermes yardstick-image yardstick-flavor test_one" + rollback_parameter: + serverconfig: "hermes" + + - operation_type: "general-operation" + key: "add-server-to-secgroup" + operation_key: "add-server-to-secgroup" + action_parameter: + serverconfig: "hermes ODLHA1" + rollback_parameter: + serverconfig: "hermes ODLHA1" + + + steps: + - actionKey: "nova-create-instance" + actionType: "operation" + index: 1 + + - actionKey: "add-server-to-secgroup" + actionType: "operation" + index: 2 + + - actionKey: "get-privateip" + actionType: "operation" + index: 3 + + - actionKey: "l2" + actionType: "monitor" + index: 4 + + nodes: + {{attack_host}}: {{attack_host}}.LF + athena: athena.ODLHA1 + runner: + type: Duration + duration: 1 + sla: + action: monitor + + +contexts: + - + type: Node + name: LF + file: {{file}} + - + name: ODLHA1 + image: yardstick-image + flavor: yardstick-flavor + user: ubuntu + host: athena + placement_groups: + pgrp1: + policy: "availability" + servers: + athena: + floating_ip: true + placement: "pgrp1" + network_ports: + test_one: + - ens0 + + ares: + floating_ip: true + placement: "pgrp1" + network_ports: + test_one: + - ens0 + + networks: + test_one: + cidr: '10.0.1.0/24' + router: 'test_router' + diff --git a/tests/opnfv/test_cases/opnfv_yardstick_tc093.yaml b/tests/opnfv/test_cases/opnfv_yardstick_tc093.yaml new file mode 100644 index 000000000..a034471aa --- /dev/null +++ b/tests/opnfv/test_cases/opnfv_yardstick_tc093.yaml @@ -0,0 +1,313 @@ +############################################################################## +## Copyright (c) 2018 Intracom Telecom and others. +## +## All rights reserved. This program and the accompanying materials +## are made available under the terms of the Apache License, Version 2.0 +## which accompanies this distribution, and is available at +## http://www.apache.org/licenses/LICENSE-2.0 +############################################################################### +--- + +schema: "yardstick:task:0.1" +description: > + Yardstick TC093 config file; + SDN Vswitch resilience in non-HA or HA configuration + +{% set file = file or '/etc/yardstick/pod.yaml' %} +{% set attack_host_cmp_one = attack_host_cmp_one or 'node4' %} +{% set attack_host_cmp_two = attack_host_cmp_two or 'node5' %} +{% set systemd_service_name = systemd_service_name or 'openvswitch-switch'%} + +scenarios: + +- + type: "GeneralHA" + options: + monitors: + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "snat" + monitor_time: 50 + host: athena + sla: + max_outage_time: 0 + parameter: + destination_ip: "8.8.8.8" + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "l2" + monitor_time: 50 + host: athena + sla: + max_outage_time: 0 + parameter: + destination_ip: "@private_ip" + + operations: + - operation_type: "general-operation" + key: "get-privateip" + operation_key: "get-privateip" + action_parameter: + server_name: "ares" + return_parameter: + all: "@private_ip" + + + steps: + - actionKey: "get-privateip" + actionType: "operation" + index: 1 + + - actionKey: "l2" + actionType: "monitor" + index: 2 + + - actionKey: "snat" + actionType: "monitor" + index: 3 + + + nodes: + athena: athena.ODLnoHA1 + runner: + type: Duration + duration: 1 + sla: + action: monitor + + +- + type: "GeneralHA" + options: + attackers: + - + fault_type: "kill-process" + process_name: "openvswitch" + key: "kill-process-cmp-one" + host: {{attack_host_cmp_one}} + + - + fault_type: "kill-process" + process_name: "openvswitch" + key: "kill-process-cmp-two" + host: {{attack_host_cmp_two}} + + monitors: + - monitor_type: "process" + process_name: "openvswitch" + host: {{attack_host_cmp_one}} + key: "monitor-recovery-cmp-one" + monitor_time: 50 + sla: + max_recover_time: 30 + + - monitor_type: "process" + process_name: "openvswitch" + host: {{attack_host_cmp_two}} + key: "monitor-recovery-cmp-two" + monitor_time: 50 + sla: + max_recover_time: 30 + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "snat" + monitor_time: 70 + host: athena + sla: + max_outage_time: 20 + parameter: + destination_ip: "8.8.8.8" + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "l2" + monitor_time: 70 + host: athena + sla: + max_outage_time: 20 + parameter: + destination_ip: "@private_ip" + + operations: + - operation_type: "general-operation" + key: "restart-service-cmp-one" + host: {{attack_host_cmp_one}} + operation_key: "start-service" + action_parameter: + service: {{systemd_service_name ~ " restart"}} + rollback_parameter: + service: "openvswitch" + + - operation_type: "general-operation" + key: "restart-service-cmp-two" + host: {{attack_host_cmp_two}} + operation_key: "start-service" + action_parameter: + service: {{systemd_service_name ~ " restart"}} + rollback_parameter: + service: "openvswitch" + + - operation_type: "general-operation" + key: "get-privateip" + operation_key: "get-privateip" + action_parameter: + server_name: "ares" + return_parameter: + all: "@private_ip" + + + + steps: + + - actionKey: "get-privateip" + actionType: "operation" + index: 1 + + - actionKey: "l2" + actionType: "monitor" + index: 2 + + - actionKey: "snat" + actionType: "monitor" + index: 3 + + - actionKey: "kill-process-cmp-one" + actionType: "attacker" + index: 4 + + - actionKey: "kill-process-cmp-two" + actionType: "attacker" + index: 5 + + - actionKey: "monitor-recovery-cmp-one" + actionType: "monitor" + index: 6 + + - actionKey: "monitor-recovery-cmp-two" + actionType: "monitor" + index: 7 + + + - actionKey: "restart-service-cmp-one" + actionType: "operation" + index: 8 + + - actionKey: "restart-service-cmp-two" + actionType: "operation" + index: 9 + + + nodes: + {{attack_host_cmp_one}}: {{attack_host_cmp_one}}.LF + {{attack_host_cmp_two}}: {{attack_host_cmp_two}}.LF + athena: athena.ODLnoHA1 + runner: + type: Duration + duration: 1 + sla: + action: monitor + +- + type: "GeneralHA" + options: + monitors: + + - monitor_type: "general-monitor" + monitor_key: "ip-status" + key: "l2" + monitor_time: 80 + host: athena + sla: + max_outage_time: 40 + parameter: + destination_ip: "@private_ip" + + operations: + - operation_type: "general-operation" + key: "get-privateip" + operation_key: "get-privateip" + action_parameter: + server_name: "hermes" + return_parameter: + all: "@private_ip" + + - operation_type: "general-operation" + key: "nova-create-instance" + operation_key: "nova-create-instance" + action_parameter: + serverconfig: "hermes yardstick-image yardstick-flavor test_one" + rollback_parameter: + serverconfig: "hermes" + + - operation_type: "general-operation" + key: "add-server-to-secgroup" + operation_key: "add-server-to-secgroup" + action_parameter: + serverconfig: "hermes ODLnoHA1" + rollback_parameter: + serverconfig: "hermes ODLnoHA1" + + + steps: + - actionKey: "nova-create-instance" + actionType: "operation" + index: 1 + + - actionKey: "add-server-to-secgroup" + actionType: "operation" + index: 2 + + - actionKey: "get-privateip" + actionType: "operation" + index: 3 + + - actionKey: "l2" + actionType: "monitor" + index: 4 + + nodes: + athena: athena.ODLnoHA1 + runner: + type: Duration + duration: 1 + sla: + action: monitor + + +contexts: + - + type: Node + name: LF + file: {{file}} + - + name: ODLnoHA1 + image: yardstick-image + flavor: yardstick-flavor + user: ubuntu + host: athena + placement_groups: + pgrp1: + policy: "availability" + servers: + athena: + floating_ip: true + placement: "pgrp1" + network_ports: + test_one: + - ens0 + + ares: + floating_ip: true + placement: "pgrp1" + network_ports: + test_one: + - ens0 + + networks: + test_one: + cidr: '10.0.1.0/24' + router: 'test_router' + diff --git a/tests/opnfv/test_suites/opnfv_os-odl-nofeature-ha_daily.yaml b/tests/opnfv/test_suites/opnfv_os-odl-nofeature-ha_daily.yaml index 13cc710f3..f174a90e4 100644 --- a/tests/opnfv/test_suites/opnfv_os-odl-nofeature-ha_daily.yaml +++ b/tests/opnfv/test_suites/opnfv_os-odl-nofeature-ha_daily.yaml @@ -62,3 +62,18 @@ test_cases: task_args: huawei-pod1: '{"file": "etc/yardstick/nodes/compass_sclab_physical/pod.yaml", "host": "node1"}' +- + file_name: opnfv_yardstick_tc092.yaml + constraint: + installer: apex + task_args: + default: '{"file": "etc/yardstick/nodes/apex_baremetal/pod.yaml", + "attack_host": "node6"}' +- + file_name: opnfv_yardstick_tc093.yaml + constraint: + installer: apex + task_args: + default: '{"file": "etc/yardstick/nodes/apex_baremetal/pod.yaml", + "attack_host_cmp_one": "node4","attack_host_cmp_two": "node5", + "systemd_service_name": "openvswitch"}' diff --git a/tests/opnfv/test_suites/opnfv_os-odl-nofeature-noha_daily.yaml b/tests/opnfv/test_suites/opnfv_os-odl-nofeature-noha_daily.yaml index 42a170a89..feb8a6631 100644 --- a/tests/opnfv/test_suites/opnfv_os-odl-nofeature-noha_daily.yaml +++ b/tests/opnfv/test_suites/opnfv_os-odl-nofeature-noha_daily.yaml @@ -61,3 +61,11 @@ test_cases: task_args: default: '{"file": "etc/yardstick/nodes/fuel_baremetal/pod.yaml", "attack_host": "node6"}' +- + file_name: opnfv_yardstick_tc093.yaml + constraint: + installer: apex + task_args: + default: '{"file": "etc/yardstick/nodes/apex_baremetal/pod.yaml", + "attack_host_cmp_one": "node4","attack_host_cmp_two": "node5", + "systemd_service_name": "openvswitch"}' diff --git a/tests/unit/network_services/vnf_generic/vnf/test_base.py b/tests/unit/network_services/vnf_generic/vnf/test_base.py index 664373f8f..9ef6473f0 100644 --- a/tests/unit/network_services/vnf_generic/vnf/test_base.py +++ b/tests/unit/network_services/vnf_generic/vnf/test_base.py @@ -215,9 +215,11 @@ class TestGenericVNF(unittest.TestCase): with self.assertRaises(TypeError) as exc: # pylint: disable=abstract-class-instantiated base.GenericVNF('vnf1', VNFD['vnfd:vnfd-catalog']['vnfd'][0]) - msg = ("Can't instantiate abstract class GenericVNF with abstract " - "methods collect_kpi, instantiate, scale, terminate, " - "wait_for_instantiate") + + msg = ("Can't instantiate abstract class GenericVNF with abstract methods " + "collect_kpi, instantiate, scale, start_collect, " + "stop_collect, terminate, wait_for_instantiate") + self.assertEqual(msg, str(exc.exception)) diff --git a/tests/unit/network_services/vnf_generic/vnf/test_sample_vnf.py b/tests/unit/network_services/vnf_generic/vnf/test_sample_vnf.py index efb79bf2c..ff71bed9d 100644 --- a/tests/unit/network_services/vnf_generic/vnf/test_sample_vnf.py +++ b/tests/unit/network_services/vnf_generic/vnf/test_sample_vnf.py @@ -1664,42 +1664,6 @@ class TestSampleVnf(unittest.TestCase): # test the default resource helper is MyResourceHelper, not subclass self.assertEqual(type(sample_vnf.resource_helper), MyResourceHelper) - def test__get_port0localip6(self): - sample_vnf = SampleVNF('vnf1', self.VNFD_0) - expected = '0064:ff9b:0:0:0:0:9810:6414' - result = sample_vnf._get_port0localip6() - self.assertEqual(result, expected) - - def test__get_port1localip6(self): - sample_vnf = SampleVNF('vnf1', self.VNFD_0) - expected = '0064:ff9b:0:0:0:0:9810:2814' - result = sample_vnf._get_port1localip6() - self.assertEqual(result, expected) - - def test__get_port0prefixip6(self): - sample_vnf = SampleVNF('vnf1', self.VNFD_0) - expected = '112' - result = sample_vnf._get_port0prefixlen6() - self.assertEqual(result, expected) - - def test__get_port1prefixip6(self): - sample_vnf = SampleVNF('vnf1', self.VNFD_0) - expected = '112' - result = sample_vnf._get_port1prefixlen6() - self.assertEqual(result, expected) - - def test__get_port0gateway6(self): - sample_vnf = SampleVNF('vnf1', self.VNFD_0) - expected = '0064:ff9b:0:0:0:0:9810:6414' - result = sample_vnf._get_port0gateway6() - self.assertEqual(result, expected) - - def test__get_port1gateway6(self): - sample_vnf = SampleVNF('vnf1', self.VNFD_0) - expected = '0064:ff9b:0:0:0:0:9810:2814' - result = sample_vnf._get_port1gateway6() - self.assertEqual(result, expected) - @mock.patch('yardstick.network_services.vnf_generic.vnf.sample_vnf.Process') def test__start_vnf(self, *args): vnfd = self.VNFD['vnfd:vnfd-catalog']['vnfd'][0] @@ -1753,6 +1717,64 @@ class TestSampleVnf(unittest.TestCase): self.assertIsNone(sample_vnf.instantiate(scenario_cfg, {})) self.assertEqual(sample_vnf.nfvi_context, context2) + def test__update_collectd_options(self): + scenario_cfg = {'options': + {'collectd': + {'interval': 3, + 'plugins': + {'plugin3': {'param': 3}}}, + 'vnf__0': + {'collectd': + {'interval': 2, + 'plugins': + {'plugin3': {'param': 2}, + 'plugin2': {'param': 2}}}}}} + context_cfg = {'nodes': + {'vnf__0': + {'collectd': + {'interval': 1, + 'plugins': + {'plugin3': {'param': 1}, + 'plugin2': {'param': 1}, + 'plugin1': {'param': 1}}}}}} + expected = {'interval': 1, + 'plugins': + {'plugin3': {'param': 1}, + 'plugin2': {'param': 1}, + 'plugin1': {'param': 1}}} + + vnfd = self.VNFD['vnfd:vnfd-catalog']['vnfd'][0] + sample_vnf = SampleVNF('vnf__0', vnfd) + sample_vnf._update_collectd_options(scenario_cfg, context_cfg) + self.assertEqual(sample_vnf.setup_helper.collectd_options, expected) + + def test__update_options(self): + options1 = {'interval': 1, + 'param1': 'value1', + 'plugins': + {'plugin3': {'param': 3}, + 'plugin2': {'param': 1}, + 'plugin1': {'param': 1}}} + options2 = {'interval': 2, + 'param2': 'value2', + 'plugins': + {'plugin4': {'param': 4}, + 'plugin2': {'param': 2}, + 'plugin1': {'param': 2}}} + expected = {'interval': 1, + 'param1': 'value1', + 'param2': 'value2', + 'plugins': + {'plugin4': {'param': 4}, + 'plugin3': {'param': 3}, + 'plugin2': {'param': 1}, + 'plugin1': {'param': 1}}} + + vnfd = self.VNFD['vnfd:vnfd-catalog']['vnfd'][0] + sample_vnf = SampleVNF('vnf1', vnfd) + sample_vnf._update_options(options2, options1) + self.assertEqual(options2, expected) + @mock.patch("yardstick.network_services.vnf_generic.vnf.sample_vnf.time") @mock.patch("yardstick.ssh.SSH") def test_wait_for_instantiate_empty_queue(self, ssh, *args): @@ -1788,16 +1810,6 @@ class TestSampleVnf(unittest.TestCase): self.assertEqual(sample_vnf.wait_for_instantiate(), 0) - def test__build_ports(self): - vnfd = self.VNFD['vnfd:vnfd-catalog']['vnfd'][0] - sample_vnf = SampleVNF('vnf1', vnfd) - - self.assertIsNone(sample_vnf._build_ports()) - self.assertIsNotNone(sample_vnf.networks) - self.assertIsNotNone(sample_vnf.uplink_ports) - self.assertIsNotNone(sample_vnf.downlink_ports) - self.assertIsNotNone(sample_vnf.my_ports) - @mock.patch("yardstick.network_services.vnf_generic.vnf.sample_vnf.time") def test_vnf_execute_with_queue_data(self, *args): queue_size_list = [ diff --git a/yardstick/benchmark/contexts/base.py b/yardstick/benchmark/contexts/base.py index ae8319e37..692c16892 100644 --- a/yardstick/benchmark/contexts/base.py +++ b/yardstick/benchmark/contexts/base.py @@ -6,17 +6,20 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## + import abc import six -import yardstick.common.utils as utils +from yardstick.common import constants +from yardstick.common import utils class Flags(object): """Class to represent the status of the flags in a context""" _FLAGS = {'no_setup': False, - 'no_teardown': False} + 'no_teardown': False, + 'os_cloud_config': constants.OS_CLOUD_DEFAULT_CONFIG} def __init__(self, **kwargs): for name, value in self._FLAGS.items(): diff --git a/yardstick/benchmark/contexts/heat.py b/yardstick/benchmark/contexts/heat.py index 0964b7baf..82861829e 100644 --- a/yardstick/benchmark/contexts/heat.py +++ b/yardstick/benchmark/contexts/heat.py @@ -325,8 +325,10 @@ class HeatContext(Context): if not os.path.exists(self.key_filename): SSH.gen_keys(self.key_filename) - heat_template = HeatTemplate(self.name, self.template_file, - self.heat_parameters) + heat_template = HeatTemplate( + self.name, template_file=self.template_file, + heat_parameters=self.heat_parameters, + os_cloud_config=self._flags.os_cloud_config) if self.template_file is None: self._add_resources_to_template(heat_template) diff --git a/yardstick/benchmark/scenarios/availability/attacker/attacker_process.py b/yardstick/benchmark/scenarios/availability/attacker/attacker_process.py index cb171eafa..7f1136c08 100644 --- a/yardstick/benchmark/scenarios/availability/attacker/attacker_process.py +++ b/yardstick/benchmark/scenarios/availability/attacker/attacker_process.py @@ -42,29 +42,28 @@ class ProcessAttacker(BaseAttacker): def check(self): with open(self.check_script, "r") as stdin_file: - exit_status, stdout, stderr = self.connection.execute( + _, stdout, stderr = self.connection.execute( "sudo /bin/sh -s {0}".format(self.service_name), stdin=stdin_file) if stdout: - LOG.info("check the environment success!") + LOG.info("Check the environment success!") return int(stdout.strip('\n')) else: - LOG.error( - "the host environment is error, stdout:%s, stderr:%s", - stdout, stderr) + LOG.error("Error checking the host environment, " + "stdout:%s, stderr:%s", stdout, stderr) return False def inject_fault(self): with open(self.inject_script, "r") as stdin_file: - exit_status, stdout, stderr = self.connection.execute( + self.connection.execute( "sudo /bin/sh -s {0}".format(self.service_name), stdin=stdin_file) def recover(self): with open(self.recovery_script, "r") as stdin_file: - exit_status, stdout, stderr = self.connection.execute( + exit_status, _, _ = self.connection.execute( "sudo /bin/bash -s {0} ".format(self.service_name), stdin=stdin_file) if exit_status: - LOG.info("Fail to restart service!") + LOG.info("Failed to restart service: %s", self.recovery_script) diff --git a/yardstick/benchmark/scenarios/availability/attacker/baseattacker.py b/yardstick/benchmark/scenarios/availability/attacker/baseattacker.py index d03d04420..d67a16b98 100644 --- a/yardstick/benchmark/scenarios/availability/attacker/baseattacker.py +++ b/yardstick/benchmark/scenarios/availability/attacker/baseattacker.py @@ -71,7 +71,7 @@ class BaseAttacker(object): for attacker_cls in utils.itersubclasses(BaseAttacker): if attacker_type == attacker_cls.__attacker_type__: return attacker_cls - raise RuntimeError("No such runner_type %s" % attacker_type) + raise RuntimeError("No such runner_type: %s" % attacker_type) def get_script_fullpath(self, path): base_path = os.path.dirname(attacker_conf_path) diff --git a/yardstick/benchmark/scenarios/availability/director.py b/yardstick/benchmark/scenarios/availability/director.py index 71690c135..6cc0cb286 100644 --- a/yardstick/benchmark/scenarios/availability/director.py +++ b/yardstick/benchmark/scenarios/availability/director.py @@ -40,7 +40,7 @@ class Director(object): nodes = self.context_cfg.get("nodes", None) # setup attackers if "attackers" in self.scenario_cfg["options"]: - LOG.debug("start init attackers...") + LOG.debug("Start init attackers...") attacker_cfgs = self.scenario_cfg["options"]["attackers"] self.attackerMgr = baseattacker.AttackerMgr() self.data = self.attackerMgr.init_attackers(attacker_cfgs, @@ -48,19 +48,19 @@ class Director(object): # setup monitors if "monitors" in self.scenario_cfg["options"]: - LOG.debug("start init monitors...") + LOG.debug("Start init monitors...") monitor_cfgs = self.scenario_cfg["options"]["monitors"] self.monitorMgr = basemonitor.MonitorMgr(self.data) self.monitorMgr.init_monitors(monitor_cfgs, nodes) # setup operations if "operations" in self.scenario_cfg["options"]: - LOG.debug("start init operations...") + LOG.debug("Start init operations...") operation_cfgs = self.scenario_cfg["options"]["operations"] self.operationMgr = baseoperation.OperationMgr() self.operationMgr.init_operations(operation_cfgs, nodes) # setup result checker if "resultCheckers" in self.scenario_cfg["options"]: - LOG.debug("start init resultCheckers...") + LOG.debug("Start init resultCheckers...") result_check_cfgs = self.scenario_cfg["options"]["resultCheckers"] self.resultCheckerMgr = baseresultchecker.ResultCheckerMgr() self.resultCheckerMgr.init_ResultChecker(result_check_cfgs, nodes) @@ -69,7 +69,7 @@ class Director(object): if intermediate_variables is None: intermediate_variables = {} LOG.debug( - "the type of current action is %s, the key is %s", type, key) + "The type of current action is %s, the key is %s", type, key) if type == ActionType.ATTACKER: return actionplayers.AttackerPlayer(self.attackerMgr[key], intermediate_variables) if type == ActionType.MONITOR: @@ -80,17 +80,17 @@ class Director(object): if type == ActionType.OPERATION: return actionplayers.OperationPlayer(self.operationMgr[key], intermediate_variables) - LOG.debug("something run when creatactionplayer") + LOG.debug("The type is not recognized by createActionPlayer") def createActionRollbacker(self, type, key): LOG.debug( - "the type of current action is %s, the key is %s", type, key) + "The type of current action is %s, the key is %s", type, key) if type == ActionType.ATTACKER: return actionrollbackers.AttackerRollbacker(self.attackerMgr[key]) if type == ActionType.OPERATION: return actionrollbackers.OperationRollbacker( self.operationMgr[key]) - LOG.debug("no rollbacker created for %s", key) + LOG.debug("No rollbacker created for key: %s", key) def verify(self): result = True @@ -99,7 +99,7 @@ class Director(object): if hasattr(self, 'resultCheckerMgr'): result &= self.resultCheckerMgr.verify() if result: - LOG.debug("monitors are passed") + LOG.debug("Monitor results are passed") return result def stopMonitors(self): @@ -107,12 +107,12 @@ class Director(object): self.monitorMgr.wait_monitors() def knockoff(self): - LOG.debug("knock off ....") + LOG.debug("Knock off ....") while self.executionSteps: singleStep = self.executionSteps.pop() singleStep.rollback() def store_result(self, result): - LOG.debug("store result ....") + LOG.debug("Store result ....") if hasattr(self, 'monitorMgr'): self.monitorMgr.store_result(result) diff --git a/yardstick/benchmark/scenarios/availability/ha_tools/start_service.bash b/yardstick/benchmark/scenarios/availability/ha_tools/start_service.bash index 858d86ca0..2388507d7 100755 --- a/yardstick/benchmark/scenarios/availability/ha_tools/start_service.bash +++ b/yardstick/benchmark/scenarios/availability/ha_tools/start_service.bash @@ -9,24 +9,23 @@ # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## -# Start a service and check the service is started +# Start or restart a service and check the service is started set -e service_name=$1 +operation=${2-start} # values are "start" or "restart" -Distributor=$(lsb_release -a | grep "Distributor ID" | awk '{print $3}') - -if [ "$Distributor" != "Ubuntu" -a "$service_name" != "keystone" -a "$service_name" != "neutron-server" -a "$service_name" != "haproxy" ]; then +if [ -f /usr/bin/yum -a "$service_name" != "keystone" -a "$service_name" != "neutron-server" -a "$service_name" != "haproxy" -a "$service_name" != "openvswitch" ]; then service_name="openstack-"${service_name} -elif [ "$Distributor" = "Ubuntu" -a "$service_name" = "keystone" ]; then +elif [ -f /usr/bin/apt -a "$service_name" = "keystone" ]; then service_name="apache2" elif [ "$service_name" = "keystone" ]; then service_name="httpd" fi if which systemctl 2>/dev/null; then - systemctl start $service_name + systemctl $operation $service_name else - service $service_name start + service $service_name $operation fi diff --git a/yardstick/benchmark/scenarios/availability/monitor/basemonitor.py b/yardstick/benchmark/scenarios/availability/monitor/basemonitor.py index 50a63f53d..f6004c774 100644 --- a/yardstick/benchmark/scenarios/availability/monitor/basemonitor.py +++ b/yardstick/benchmark/scenarios/availability/monitor/basemonitor.py @@ -103,7 +103,7 @@ class BaseMonitor(multiprocessing.Process): for monitor in utils.itersubclasses(BaseMonitor): if monitor_type == monitor.__monitor_type__: return monitor - raise RuntimeError("No such monitor_type %s" % monitor_type) + raise RuntimeError("No such monitor_type: %s" % monitor_type) def get_script_fullpath(self, path): base_path = os.path.dirname(monitor_conf_path) diff --git a/yardstick/benchmark/scenarios/availability/monitor/monitor_command.py b/yardstick/benchmark/scenarios/availability/monitor/monitor_command.py index d0551bf03..3b36c762d 100644 --- a/yardstick/benchmark/scenarios/availability/monitor/monitor_command.py +++ b/yardstick/benchmark/scenarios/availability/monitor/monitor_command.py @@ -24,7 +24,7 @@ def _execute_shell_command(command): output = [] try: output = subprocess.check_output(command, shell=True) - except Exception: + except Exception: # pylint: disable=broad-except exitcode = -1 LOG.error("exec command '%s' error:\n ", command, exc_info=True) @@ -45,7 +45,7 @@ class MonitorOpenstackCmd(basemonitor.BaseMonitor): self.connection = ssh.SSH.from_node(host, defaults={"user": "root"}) self.connection.wait(timeout=600) - LOG.debug("ssh host success!") + LOG.debug("ssh host (%s) success!", str(host)) self.check_script = self.get_script_fullpath( "ha_tools/check_openstack_cmd.bash") @@ -61,22 +61,20 @@ class MonitorOpenstackCmd(basemonitor.BaseMonitor): self.cmd = self.cmd + " --insecure" def monitor_func(self): - exit_status = 0 exit_status, stdout = _execute_shell_command(self.cmd) - LOG.debug("Execute command '%s' and the stdout is:\n%s", self.cmd, stdout) + LOG.debug("Executed command '%s'. " + "The stdout is:\n%s", self.cmd, stdout) if exit_status: return False return True def verify_SLA(self): outage_time = self._result.get('outage_time', None) - LOG.debug("the _result:%s", self._result) max_outage_time = self._config["sla"]["max_outage_time"] if outage_time > max_outage_time: LOG.info("SLA failure: %f > %f", outage_time, max_outage_time) return False else: - LOG.info("the sla is passed") return True @@ -97,7 +95,7 @@ def _test(): # pragma: no cover } monitor_configs.append(config) - p = basemonitor.MonitorMgr() + p = basemonitor.MonitorMgr({}) p.init_monitors(monitor_configs, context) p.start_monitors() p.wait_monitors() diff --git a/yardstick/benchmark/scenarios/availability/monitor/monitor_multi.py b/yardstick/benchmark/scenarios/availability/monitor/monitor_multi.py index dce69f45f..971bae1e9 100644 --- a/yardstick/benchmark/scenarios/availability/monitor/monitor_multi.py +++ b/yardstick/benchmark/scenarios/availability/monitor/monitor_multi.py @@ -29,7 +29,7 @@ class MultiMonitor(basemonitor.BaseMonitor): monitor_cls = basemonitor.BaseMonitor.get_monitor_cls(monitor_type) monitor_number = self._config.get("monitor_number", 1) - for i in range(monitor_number): + for _ in range(monitor_number): monitor_ins = monitor_cls(self._config, self._context, self.monitor_data) self.monitors.append(monitor_ins) @@ -70,7 +70,8 @@ class MultiMonitor(basemonitor.BaseMonitor): elif "max_recover_time" in self._config["sla"]: max_outage_time = self._config["sla"]["max_recover_time"] else: - raise RuntimeError("monitor max_outage_time config is not found") + raise RuntimeError("'max_outage_time' or 'max_recover_time' " + "config is not found") self._result = {"outage_time": outage_time} if outage_time > max_outage_time: diff --git a/yardstick/benchmark/scenarios/availability/monitor/monitor_process.py b/yardstick/benchmark/scenarios/availability/monitor/monitor_process.py index b0f6f8e9d..8d2f2633c 100644 --- a/yardstick/benchmark/scenarios/availability/monitor/monitor_process.py +++ b/yardstick/benchmark/scenarios/availability/monitor/monitor_process.py @@ -25,14 +25,14 @@ class MonitorProcess(basemonitor.BaseMonitor): self.connection = ssh.SSH.from_node(host, defaults={"user": "root"}) self.connection.wait(timeout=600) - LOG.debug("ssh host success!") + LOG.debug("ssh host (%s) success!", str(host)) self.check_script = self.get_script_fullpath( "ha_tools/check_process_python.bash") self.process_name = self._config["process_name"] def monitor_func(self): with open(self.check_script, "r") as stdin_file: - exit_status, stdout, stderr = self.connection.execute( + _, stdout, _ = self.connection.execute( "sudo /bin/sh -s {0}".format(self.process_name), stdin=stdin_file) @@ -45,14 +45,12 @@ class MonitorProcess(basemonitor.BaseMonitor): return True def verify_SLA(self): - LOG.debug("the _result:%s", self._result) outage_time = self._result.get('outage_time', None) max_outage_time = self._config["sla"]["max_recover_time"] if outage_time > max_outage_time: - LOG.error("SLA failure: %f > %f", outage_time, max_outage_time) + LOG.info("SLA failure: %f > %f", outage_time, max_outage_time) return False else: - LOG.info("the sla is passed") return True @@ -73,7 +71,7 @@ def _test(): # pragma: no cover } monitor_configs.append(config) - p = basemonitor.MonitorMgr() + p = basemonitor.MonitorMgr({}) p.init_monitors(monitor_configs, context) p.start_monitors() p.wait_monitors() diff --git a/yardstick/benchmark/scenarios/availability/serviceha.py b/yardstick/benchmark/scenarios/availability/serviceha.py index dcd0fe598..42941c6e7 100755 --- a/yardstick/benchmark/scenarios/availability/serviceha.py +++ b/yardstick/benchmark/scenarios/availability/serviceha.py @@ -34,7 +34,7 @@ class ServiceHA(base.Scenario): """scenario setup""" nodes = self.context_cfg.get("nodes", None) if nodes is None: - LOG.error("the nodes info is none") + LOG.error("The nodes info is none") return self.attackers = [] @@ -57,17 +57,17 @@ class ServiceHA(base.Scenario): def run(self, result): """execute the benchmark""" if not self.setup_done: - LOG.error("The setup not finished!") + LOG.error("The setup is not finished!") return self.monitorMgr.start_monitors() - LOG.info("HA monitor start!") + LOG.info("Monitor '%s' start!", self.__scenario_type__) for attacker in self.attackers: attacker.inject_fault() self.monitorMgr.wait_monitors() - LOG.info("HA monitor stop!") + LOG.info("Monitor '%s' stop!", self.__scenario_type__) sla_pass = self.monitorMgr.verify_SLA() for k, v in self.data.items(): diff --git a/yardstick/benchmark/scenarios/lib/attach_volume.py b/yardstick/benchmark/scenarios/lib/attach_volume.py index 88124964b..96dd130b1 100644 --- a/yardstick/benchmark/scenarios/lib/attach_volume.py +++ b/yardstick/benchmark/scenarios/lib/attach_volume.py @@ -6,30 +6,31 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## - -from __future__ import print_function -from __future__ import absolute_import - import logging from yardstick.benchmark.scenarios import base -import yardstick.common.openstack_utils as op_utils +from yardstick.common import openstack_utils +from yardstick.common import exceptions LOG = logging.getLogger(__name__) class AttachVolume(base.Scenario): - """Attach a volmeu to an instance""" + """Attach a volume to an instance""" __scenario_type__ = "AttachVolume" def __init__(self, scenario_cfg, context_cfg): self.scenario_cfg = scenario_cfg self.context_cfg = context_cfg - self.options = self.scenario_cfg['options'] + self.options = self.scenario_cfg["options"] - self.server_id = self.options.get("server_id", "TestServer") - self.volume_id = self.options.get("volume_id", None) + self.server_name_or_id = self.options["server_name_or_id"] + self.volume_name_or_id = self.options["volume_name_or_id"] + self.device = self.options.get("device") + self.wait = self.options.get("wait", True) + self.timeout = self.options.get("timeout") + self.shade_client = openstack_utils.get_shade_client() self.setup_done = False @@ -44,10 +45,14 @@ class AttachVolume(base.Scenario): if not self.setup_done: self.setup() - status = op_utils.attach_server_volume(self.server_id, - self.volume_id) + status = openstack_utils.attach_volume_to_server( + self.shade_client, self.server_name_or_id, self.volume_name_or_id, + device=self.device, wait=self.wait, timeout=self.timeout) + + if not status: + result.update({"attach_volume": 0}) + LOG.error("Attach volume to server failed!") + raise exceptions.ScenarioAttachVolumeError - if status: - LOG.info("Attach volume to server successful!") - else: - LOG.info("Attach volume to server failed!") + result.update({"attach_volume": 1}) + LOG.info("Attach volume to server successful!") diff --git a/yardstick/benchmark/scenarios/lib/create_volume.py b/yardstick/benchmark/scenarios/lib/create_volume.py index df523a5ec..b66749026 100644 --- a/yardstick/benchmark/scenarios/lib/create_volume.py +++ b/yardstick/benchmark/scenarios/lib/create_volume.py @@ -7,14 +7,12 @@ # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## -from __future__ import print_function -from __future__ import absolute_import - import time import logging from yardstick.benchmark.scenarios import base -import yardstick.common.openstack_utils as op_utils +from yardstick.common import openstack_utils +from yardstick.common import exceptions LOG = logging.getLogger(__name__) @@ -27,15 +25,16 @@ class CreateVolume(base.Scenario): def __init__(self, scenario_cfg, context_cfg): self.scenario_cfg = scenario_cfg self.context_cfg = context_cfg - self.options = self.scenario_cfg['options'] + self.options = self.scenario_cfg["options"] - self.volume_name = self.options.get("volume_name", "TestVolume") - self.volume_size = self.options.get("size", 100) - self.image_name = self.options.get("image", None) - self.image_id = None + self.size = self.options["size_gb"] + self.wait = self.options.get("wait", True) + self.timeout = self.options.get("timeout") + self.image = self.options.get("image") + self.name = self.options.get("name") + self.description = self.options.get("description") - self.glance_client = op_utils.get_glance_client() - self.cinder_client = op_utils.get_cinder_client() + self.shade_client = openstack_utils.get_shade_client() self.setup_done = False @@ -44,27 +43,29 @@ class CreateVolume(base.Scenario): self.setup_done = True - def run(self): + def run(self, result): """execute the test""" if not self.setup_done: self.setup() - self.image_id = op_utils.get_image_id(self.glance_client, - self.image_name) + volume = openstack_utils.create_volume( + self.shade_client, self.size, wait=self.wait, timeout=self.timeout, + image=self.image, name=self.name, description=self.description) - volume = op_utils.create_volume(self.cinder_client, self.volume_name, - self.volume_size, self.image_id) + if not volume: + result.update({"volume_create": 0}) + LOG.error("Create volume failed!") + raise exceptions.ScenarioCreateVolumeError - status = volume.status - while(status == 'creating' or status == 'downloading'): + status = volume["status"] + while status == "creating" or status == "downloading": LOG.info("Volume status is: %s", status) time.sleep(5) - volume = op_utils.get_volume_by_name(self.volume_name) - status = volume.status - + volume = openstack_utils.get_volume(self.shade_client, self.name) + status = volume["status"] + result.update({"volume_create": 1}) LOG.info("Create volume successful!") - - values = [volume.id] - keys = self.scenario_cfg.get('output', '').split() + values = [volume["id"]] + keys = self.scenario_cfg.get("output", '').split() return self._push_to_outputs(keys, values) diff --git a/yardstick/benchmark/scenarios/lib/delete_volume.py b/yardstick/benchmark/scenarios/lib/delete_volume.py index ea2b85812..59e19dfdf 100644 --- a/yardstick/benchmark/scenarios/lib/delete_volume.py +++ b/yardstick/benchmark/scenarios/lib/delete_volume.py @@ -6,14 +6,11 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## - -from __future__ import print_function -from __future__ import absolute_import - import logging +from yardstick.common import openstack_utils +from yardstick.common import exceptions from yardstick.benchmark.scenarios import base -import yardstick.common.openstack_utils as op_utils LOG = logging.getLogger(__name__) @@ -26,11 +23,13 @@ class DeleteVolume(base.Scenario): def __init__(self, scenario_cfg, context_cfg): self.scenario_cfg = scenario_cfg self.context_cfg = context_cfg - self.options = self.scenario_cfg['options'] + self.options = self.scenario_cfg["options"] - self.volume_id = self.options.get("volume_id", None) + self.volume_name_or_id = self.options.get("name_or_id") + self.wait = self.options.get("wait", True) + self.timeout = self.options.get("timeout") - self.cinder_client = op_utils.get_cinder_client() + self.shade_client = openstack_utils.get_shade_client() self.setup_done = False @@ -45,11 +44,14 @@ class DeleteVolume(base.Scenario): if not self.setup_done: self.setup() - status = op_utils.delete_volume(self.cinder_client, self.volume_id) + status = openstack_utils.delete_volume( + self.shade_client, name_or_id=self.volume_name_or_id, + wait=self.wait, timeout=self.timeout) - if status: - result.update({"delete_volume": 1}) - LOG.info("Delete volume successful!") - else: + if not status: result.update({"delete_volume": 0}) - LOG.info("Delete volume failed!") + LOG.error("Delete volume failed!") + raise exceptions.ScenarioDeleteVolumeError + + result.update({"delete_volume": 1}) + LOG.info("Delete volume successful!") diff --git a/yardstick/benchmark/scenarios/lib/detach_volume.py b/yardstick/benchmark/scenarios/lib/detach_volume.py index 0b02a3a81..76c0167bd 100644 --- a/yardstick/benchmark/scenarios/lib/detach_volume.py +++ b/yardstick/benchmark/scenarios/lib/detach_volume.py @@ -6,14 +6,12 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## - -from __future__ import print_function -from __future__ import absolute_import - import logging +from yardstick.common import openstack_utils +from yardstick.common import exceptions from yardstick.benchmark.scenarios import base -import yardstick.common.openstack_utils as op_utils + LOG = logging.getLogger(__name__) @@ -26,10 +24,14 @@ class DetachVolume(base.Scenario): def __init__(self, scenario_cfg, context_cfg): self.scenario_cfg = scenario_cfg self.context_cfg = context_cfg - self.options = self.scenario_cfg['options'] + self.options = self.scenario_cfg["options"] - self.server_id = self.options.get("server_id", "TestServer") - self.volume_id = self.options.get("volume_id", None) + self.server = self.options["server_name_or_id"] + self.volume = self.options["volume_name_or_id"] + self.wait = self.options.get("wait", True) + self.timeout = self.options.get("timeout") + + self.shade_client = openstack_utils.get_shade_client() self.setup_done = False @@ -44,11 +46,14 @@ class DetachVolume(base.Scenario): if not self.setup_done: self.setup() - status = op_utils.detach_volume(self.server_id, self.volume_id) + status = openstack_utils.detach_volume( + self.shade_client, self.server, self.volume, + wait=self.wait, timeout=self.timeout) - if status: - result.update({"detach_volume": 1}) - LOG.info("Detach volume from server successful!") - else: + if not status: result.update({"detach_volume": 0}) - LOG.info("Detach volume from server failed!") + LOG.error("Detach volume from server failed!") + raise exceptions.ScenarioDetachVolumeError + + result.update({"detach_volume": 1}) + LOG.info("Detach volume from server successful!") diff --git a/yardstick/benchmark/scenarios/lib/get_flavor.py b/yardstick/benchmark/scenarios/lib/get_flavor.py index d5e33947e..6727a7343 100644 --- a/yardstick/benchmark/scenarios/lib/get_flavor.py +++ b/yardstick/benchmark/scenarios/lib/get_flavor.py @@ -6,14 +6,11 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## - -from __future__ import print_function -from __future__ import absolute_import - import logging from yardstick.benchmark.scenarios import base -import yardstick.common.openstack_utils as op_utils +from yardstick.common import openstack_utils +from yardstick.common import exceptions LOG = logging.getLogger(__name__) @@ -26,8 +23,12 @@ class GetFlavor(base.Scenario): def __init__(self, scenario_cfg, context_cfg): self.scenario_cfg = scenario_cfg self.context_cfg = context_cfg - self.options = self.scenario_cfg['options'] - self.flavor_name = self.options.get("flavor_name", "TestFlavor") + self.options = self.scenario_cfg["options"] + self.name_or_id = self.options["name_or_id"] + self.filters = self.options.get("filters") + self.get_extra = self.options.get("get_extra", True) + self.shade_client = openstack_utils.get_shade_client() + self.setup_done = False def setup(self): @@ -41,14 +42,18 @@ class GetFlavor(base.Scenario): if not self.setup_done: self.setup() - LOG.info("Querying flavor: %s", self.flavor_name) - flavor = op_utils.get_flavor_by_name(self.flavor_name) - if flavor: - LOG.info("Get flavor successful!") - values = [self._change_obj_to_dict(flavor)] - else: - LOG.info("Get flavor: no flavor matched!") - values = [] + LOG.info("Querying flavor: %s", self.name_or_id) + flavor = openstack_utils.get_flavor( + self.shade_client, self.name_or_id, filters=self.filters, + get_extra=self.get_extra) + + if not flavor: + result.update({"get_flavor": 0}) + LOG.error("Get flavor failed!") + raise exceptions.ScenarioGetFlavorError - keys = self.scenario_cfg.get('output', '').split() + result.update({"get_flavor": 1}) + LOG.info("Get flavor successful!") + values = [flavor] + keys = self.scenario_cfg.get("output", '').split() return self._push_to_outputs(keys, values) diff --git a/yardstick/benchmark/scenarios/lib/get_server.py b/yardstick/benchmark/scenarios/lib/get_server.py index fcf47c80d..f65fa9ebf 100644 --- a/yardstick/benchmark/scenarios/lib/get_server.py +++ b/yardstick/benchmark/scenarios/lib/get_server.py @@ -6,14 +6,11 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## - -from __future__ import print_function -from __future__ import absolute_import - import logging from yardstick.benchmark.scenarios import base -import yardstick.common.openstack_utils as op_utils +from yardstick.common import openstack_utils +from yardstick.common import exceptions LOG = logging.getLogger(__name__) @@ -21,63 +18,58 @@ LOG = logging.getLogger(__name__) class GetServer(base.Scenario): """Get a server instance - Parameters - server_id - ID of the server - type: string - unit: N/A - default: null - server_name - name of the server - type: string - unit: N/A - default: null - - Either server_id or server_name is required. - - Outputs + Parameters: + name_or_id - Name or ID of the server + type: string + filters - meta data to use for further filtering + type: dict + detailed: Whether or not to add detailed additional information. + type: bool + bare: Whether to skip adding any additional information to the server + record. + type: bool + all_projects: Whether to get server from all projects or just the current + auth scoped project. + type: bool + + Outputs: rc - response code of getting server instance - 0 for success - 1 for failure + 1 for success + 0 for failure type: int - unit: N/A server - instance of the server type: dict - unit: N/A + """ - __scenario_type__ = "GetServer" + __scenario_type__ = 'GetServer' def __init__(self, scenario_cfg, context_cfg): self.scenario_cfg = scenario_cfg self.context_cfg = context_cfg - self.options = self.scenario_cfg.get('options', {}) + self.options = self.scenario_cfg['options'] - self.server_id = self.options.get("server_id") - if self.server_id: - LOG.debug('Server id is %s', self.server_id) + self.server_name_or_id = self.options.get('name_or_id') + self.filters = self.options.get('filters') + self.detailed = self.options.get('detailed', False) + self.bare = self.options.get('bare', False) - default_name = self.scenario_cfg.get('host', - self.scenario_cfg.get('target')) - self.server_name = self.options.get('server_name', default_name) - if self.server_name: - LOG.debug('Server name is %s', self.server_name) - - self.nova_client = op_utils.get_nova_client() + self.shade_client = openstack_utils.get_shade_client() def run(self, result): """execute the test""" - if self.server_id: - server = self.nova_client.servers.get(self.server_id) - else: - server = op_utils.get_server_by_name(self.server_name) - - keys = self.scenario_cfg.get('output', '').split() + server = openstack_utils.get_server( + self.shade_client, name_or_id=self.server_name_or_id, + filters=self.filters, detailed=self.detailed, bare=self.bare) - if server: - LOG.info("Get server successful!") - values = [0, self._change_obj_to_dict(server)] - else: - LOG.info("Get server failed!") - values = [1] + if not server: + result.update({'get_server': 0}) + LOG.error('Get Server failed!') + raise exceptions.ScenarioGetServerError + result.update({'get_server': 1}) + LOG.info('Get Server successful!') + keys = self.scenario_cfg.get('output', '').split() + values = [server] return self._push_to_outputs(keys, values) diff --git a/yardstick/benchmark/scenarios/networking/vnf_generic.py b/yardstick/benchmark/scenarios/networking/vnf_generic.py index be2fa3f3b..78f866e25 100644 --- a/yardstick/benchmark/scenarios/networking/vnf_generic.py +++ b/yardstick/benchmark/scenarios/networking/vnf_generic.py @@ -441,7 +441,7 @@ class NetworkServiceTestCase(scenario_base.Scenario): traffic_gen.listen_traffic(self.traffic_profile) # register collector with yardstick for KPI collection. - self.collector = Collector(self.vnfs, self.context_cfg["nodes"], self.traffic_profile) + self.collector = Collector(self.vnfs) self.collector.start() # Start the actual traffic diff --git a/yardstick/common/constants.py b/yardstick/common/constants.py index 153bd4bf4..8640afbae 100644 --- a/yardstick/common/constants.py +++ b/yardstick/common/constants.py @@ -152,3 +152,6 @@ IS_PUBLIC = 'is_public' # general TESTCASE_PRE = 'opnfv_yardstick_' TESTSUITE_PRE = 'opnfv_' + +# OpenStack cloud default config parameters +OS_CLOUD_DEFAULT_CONFIG = {'verify': False} diff --git a/yardstick/common/exceptions.py b/yardstick/common/exceptions.py index 330eb5e0a..36c7eef05 100644 --- a/yardstick/common/exceptions.py +++ b/yardstick/common/exceptions.py @@ -54,6 +54,10 @@ class YardstickException(Exception): return False +class ResourceCommandError(YardstickException): + message = 'Command: "%(command)s" Failed, stderr: "%(stderr)s"' + + class FunctionNotImplemented(YardstickException): message = ('The function "%(function_name)s" is not implemented in ' '"%(class_name)" class.') @@ -214,3 +218,27 @@ class ScenarioCreateKeypairError(YardstickException): class ScenarioDeleteKeypairError(YardstickException): message = 'Nova Delete Keypair Scenario failed' + + +class ScenarioAttachVolumeError(YardstickException): + message = 'Nova Attach Volume Scenario failed' + + +class ScenarioGetServerError(YardstickException): + message = 'Nova Get Server Scenario failed' + + +class ScenarioGetFlavorError(YardstickException): + message = 'Nova Get Falvor Scenario failed' + + +class ScenarioCreateVolumeError(YardstickException): + message = 'Cinder Create Volume Scenario failed' + + +class ScenarioDeleteVolumeError(YardstickException): + message = 'Cinder Delete Volume Scenario failed' + + +class ScenarioDetachVolumeError(YardstickException): + message = 'Cinder Detach Volume Scenario failed' diff --git a/yardstick/common/openstack_utils.py b/yardstick/common/openstack_utils.py index 0902d29e1..e3e08feb6 100644 --- a/yardstick/common/openstack_utils.py +++ b/yardstick/common/openstack_utils.py @@ -7,19 +7,20 @@ # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## -import os -import sys +import copy import logging +import os +from cinderclient import client as cinderclient +from novaclient import client as novaclient +from glanceclient import client as glanceclient from keystoneauth1 import loading from keystoneauth1 import session +from neutronclient.neutron import client as neutronclient import shade from shade import exc -from cinderclient import client as cinderclient -from novaclient import client as novaclient -from glanceclient import client as glanceclient -from neutronclient.neutron import client as neutronclient +from yardstick.common import constants log = logging.getLogger(__name__) @@ -155,8 +156,21 @@ def get_glance_client(): # pragma: no cover return glanceclient.Client(get_glance_client_version(), session=sess) -def get_shade_client(): - return shade.openstack_cloud() +def get_shade_client(**os_cloud_config): + """Get Shade OpenStack cloud client + + By default, the input parameters given to "shade.openstack_cloud" method + are stored in "constants.OS_CLOUD_DEFAULT_CONFIG". The input parameters + passed in this function, "os_cloud_config", will overwrite the default + ones. + + :param os_cloud_config: (kwargs) input arguments for + "shade.openstack_cloud" method. + :return: ``shade.OpenStackCloud`` object. + """ + params = copy.deepcopy(constants.OS_CLOUD_DEFAULT_CONFIG) + params.update(os_cloud_config) + return shade.openstack_cloud(**params) # ********************************************* @@ -264,17 +278,36 @@ def create_instance_and_wait_for_active(shade_client, name, image, "Exception message, '%s'", o_exc.orig_message) -def attach_server_volume(server_id, volume_id, - device=None): # pragma: no cover +def attach_volume_to_server(shade_client, server_name_or_id, volume_name_or_id, + device=None, wait=True, timeout=None): + """Attach a volume to a server. + + This will attach a volume, described by the passed in volume + dict, to the server described by the passed in server dict on the named + device on the server. + + If the volume is already attached to the server, or generally not + available, then an exception is raised. To re-attach to a server, + but under a different device, the user must detach it first. + + :param server_name_or_id:(string) The server name or id to attach to. + :param volume_name_or_id:(string) The volume name or id to attach. + :param device:(string) The device name where the volume will attach. + :param wait:(bool) If true, waits for volume to be attached. + :param timeout: Seconds to wait for volume attachment. None is forever. + + :returns: True if attached successful, False otherwise. + """ try: - get_nova_client().volumes.create_server_volume(server_id, - volume_id, device) - except Exception: # pylint: disable=broad-except - log.exception("Error [attach_server_volume(nova_client, '%s', '%s')]", - server_id, volume_id) - return False - else: + server = shade_client.get_server(name_or_id=server_name_or_id) + volume = shade_client.get_volume(volume_name_or_id) + shade_client.attach_volume( + server, volume, device=device, wait=wait, timeout=timeout) return True + except exc.OpenStackCloudException as o_exc: + log.error("Error [attach_volume_to_server(shade_client)]. " + "Exception message: %s", o_exc.orig_message) + return False def delete_instance(shade_client, name_or_id, wait=False, timeout=180, @@ -302,12 +335,26 @@ def delete_instance(shade_client, name_or_id, wait=False, timeout=180, return False -def get_server_by_name(name): # pragma: no cover +def get_server(shade_client, name_or_id=None, filters=None, detailed=False, + bare=False): + """Get a server by name or ID. + + :param name_or_id: Name or ID of the server. + :param filters:(dict) A dictionary of meta data to use for further + filtering. + :param detailed:(bool) Whether or not to add detailed additional + information. + :param bare:(bool) Whether to skip adding any additional information to the + server record. + + :returns: A server ``munch.Munch`` or None if no matching server is found. + """ try: - return get_nova_client().servers.list(search_opts={'name': name})[0] - except IndexError: - log.exception('Failed to get nova client') - raise + return shade_client.get_server(name_or_id=name_or_id, filters=filters, + detailed=detailed, bare=bare) + except exc.OpenStackCloudException as o_exc: + log.error("Error [get_server(shade_client, '%s')]. " + "Exception message: %s", name_or_id, o_exc.orig_message) def create_flavor(name, ram, vcpus, disk, **kwargs): # pragma: no cover @@ -330,12 +377,22 @@ def get_flavor_id(nova_client, flavor_name): # pragma: no cover return flavor_id -def get_flavor_by_name(name): # pragma: no cover - flavors = get_nova_client().flavors.list() +def get_flavor(shade_client, name_or_id, filters=None, get_extra=True): + """Get a flavor by name or ID. + + :param name_or_id: Name or ID of the flavor. + :param filters: A dictionary of meta data to use for further filtering. + :param get_extra: Whether or not the list_flavors call should get the extra + flavor specs. + + :returns: A flavor ``munch.Munch`` or None if no matching flavor is found. + """ try: - return next((a for a in flavors if a.name == name)) - except StopIteration: - log.exception('No flavor matched') + return shade_client.get_flavor(name_or_id, filters=filters, + get_extra=get_extra) + except exc.OpenStackCloudException as o_exc: + log.error("Error [get_flavor(shade_client, '%s')]. " + "Exception message: %s", name_or_id, o_exc.orig_message) def delete_flavor(flavor_id): # pragma: no cover @@ -726,54 +783,79 @@ def list_images(shade_client=None): # ********************************************* # CINDER # ********************************************* -def get_volume_id(volume_name): # pragma: no cover - volumes = get_cinder_client().volumes.list() - return next((v.id for v in volumes if v.name == volume_name), None) +def get_volume_id(shade_client, volume_name): + return shade_client.get_volume_id(volume_name) + + +def get_volume(shade_client, name_or_id, filters=None): + """Get a volume by name or ID. + + :param name_or_id: Name or ID of the volume. + :param filters: A dictionary of meta data to use for further filtering. + :returns: A volume ``munch.Munch`` or None if no matching volume is found. + """ + return shade_client.get_volume(name_or_id, filters=filters) + + +def create_volume(shade_client, size, wait=True, timeout=None, + image=None, **kwargs): + """Create a volume. + + :param size: Size, in GB of the volume to create. + :param name: (optional) Name for the volume. + :param description: (optional) Name for the volume. + :param wait: If true, waits for volume to be created. + :param timeout: Seconds to wait for volume creation. None is forever. + :param image: (optional) Image name, ID or object from which to create + the volume. -def create_volume(cinder_client, volume_name, volume_size, - volume_image=False): # pragma: no cover + :returns: The created volume object. + + """ try: - if volume_image: - volume = cinder_client.volumes.create(name=volume_name, - size=volume_size, - imageRef=volume_image) - else: - volume = cinder_client.volumes.create(name=volume_name, - size=volume_size) - return volume - except Exception: # pylint: disable=broad-except - log.exception("Error [create_volume(cinder_client, %s)]", - (volume_name, volume_size)) - return None + return shade_client.create_volume(size, wait=wait, timeout=timeout, + image=image, **kwargs) + except (exc.OpenStackCloudException, exc.OpenStackCloudTimeout) as op_exc: + log.error("Failed to create_volume(shade_client). " + "Exception message: %s", op_exc.orig_message) + +def delete_volume(shade_client, name_or_id=None, wait=True, timeout=None): + """Delete a volume. -def delete_volume(cinder_client, volume_id, - forced=False): # pragma: no cover + :param name_or_id:(string) Name or unique ID of the volume. + :param wait:(bool) If true, waits for volume to be deleted. + :param timeout:(string) Seconds to wait for volume deletion. None is forever. + + :return: True on success, False otherwise. + """ try: - if forced: - try: - cinder_client.volumes.detach(volume_id) - except Exception: # pylint: disable=broad-except - log.error(sys.exc_info()[0]) - cinder_client.volumes.force_delete(volume_id) - else: - while True: - volume = get_cinder_client().volumes.get(volume_id) - if volume.status.lower() == 'available': - break - cinder_client.volumes.delete(volume_id) - return True - except Exception: # pylint: disable=broad-except - log.exception("Error [delete_volume(cinder_client, '%s')]", volume_id) + return shade_client.delete_volume(name_or_id=name_or_id, + wait=wait, timeout=timeout) + except (exc.OpenStackCloudException, exc.OpenStackCloudTimeout) as o_exc: + log.error("Error [delete_volume(shade_client,'%s')]. " + "Exception message: %s", name_or_id, o_exc.orig_message) return False -def detach_volume(server_id, volume_id): # pragma: no cover +def detach_volume(shade_client, server_name_or_id, volume_name_or_id, + wait=True, timeout=None): + """Detach a volume from a server. + + :param server_name_or_id: The server name or id to detach from. + :param volume_name_or_id: The volume name or id to detach. + :param wait: If true, waits for volume to be detached. + :param timeout: Seconds to wait for volume detachment. None is forever. + + :return: True on success. + """ try: - get_nova_client().volumes.delete_server_volume(server_id, volume_id) + volume = shade_client.get_volume(volume_name_or_id) + server = get_server(shade_client, name_or_id=server_name_or_id) + shade_client.detach_volume(server, volume, wait=wait, timeout=timeout) return True - except Exception: # pylint: disable=broad-except - log.exception("Error [detach_server_volume(nova_client, '%s', '%s')]", - server_id, volume_id) + except (exc.OpenStackCloudException, exc.OpenStackCloudTimeout) as o_exc: + log.error("Error [detach_volume(shade_client)]. " + "Exception message: %s", o_exc.orig_message) return False diff --git a/yardstick/network_services/collector/subscriber.py b/yardstick/network_services/collector/subscriber.py index 7e18302eb..322b3f5a2 100644 --- a/yardstick/network_services/collector/subscriber.py +++ b/yardstick/network_services/collector/subscriber.py @@ -14,42 +14,29 @@ """This module implements stub for publishing results in yardstick format.""" import logging -from yardstick.network_services.nfvi.resource import ResourceProfile -from yardstick.network_services.utils import get_nsb_option - LOG = logging.getLogger(__name__) class Collector(object): """Class that handles dictionary of results in yardstick-plot format.""" - def __init__(self, vnfs, nodes, traffic_profile, timeout=3600): + def __init__(self, vnfs): super(Collector, self).__init__() - self.traffic_profile = traffic_profile self.vnfs = vnfs - self.nodes = nodes - self.timeout = timeout - self.bin_path = get_nsb_option('bin_path', '') - self.resource_profiles = {node_name: ResourceProfile.make_from_node(node, self.timeout) - for node_name, node in self.nodes.items() - if node.get("collectd")} def start(self): - """Nothing to do, yet""" - for resource in self.resource_profiles.values(): - resource.initiate_systemagent(self.bin_path) - resource.start() - resource.amqp_process_for_nfvi_kpi() + for vnf in self.vnfs: + vnf.start_collect() def stop(self): - """Nothing to do, yet""" - for resource in self.resource_profiles.values(): - resource.stop() + for vnf in self.vnfs: + vnf.stop_collect() def get_kpi(self): """Returns dictionary of results in yardstick-plot format - :return: + :return: (dict) dictionary of kpis collected from the VNFs; + the keys are the names of the VNFs. """ results = {} for vnf in self.vnfs: @@ -58,17 +45,4 @@ class Collector(object): LOG.debug("collect KPI for %s", vnf.name) results[vnf.name] = vnf.collect_kpi() - for node_name, resource in self.resource_profiles.items(): - # Result example: - # {"VNF1: { "tput" : [1000, 999] }, "VNF2": { "latency": 100 }} - LOG.debug("collect KPI for %s", node_name) - if resource.check_if_system_agent_running("collectd")[0] != 0: - continue - - try: - results[node_name] = {"core": resource.amqp_collect_nfvi_kpi()} - LOG.debug("%s collect KPIs %s", node_name, results[node_name]['core']) - # NOTE(elfoley): catch a more specific error - except Exception as exc: # pylint: disable=broad-except - LOG.exception(exc) return results diff --git a/yardstick/network_services/libs/ixia_libs/IxNet/IxNet.py b/yardstick/network_services/libs/ixia_libs/IxNet/IxNet.py index 70ce4ff03..c538ceeba 100644 --- a/yardstick/network_services/libs/ixia_libs/IxNet/IxNet.py +++ b/yardstick/network_services/libs/ixia_libs/IxNet/IxNet.py @@ -12,13 +12,12 @@ # See the License for the specific language governing permissions and # limitations under the License. -from __future__ import absolute_import -from __future__ import print_function -import sys import logging import re from itertools import product +import IxNetwork + log = logging.getLogger(__name__) @@ -135,7 +134,6 @@ class IxNextgen(object): port.append(port0) cfg = { - 'py_lib_path': tg_cfg["mgmt-interface"]["tg-config"]["py_lib_path"], 'machine': tg_cfg["mgmt-interface"]["ip"], 'port': tg_cfg["mgmt-interface"]["tg-config"]["tcl_port"], 'chassis': tg_cfg["mgmt-interface"]["tg-config"]["ixchassis"], @@ -186,7 +184,7 @@ class IxNextgen(object): self.set_random_ip_multi_attribute(ip, seeds[1], fixed_bits, random_mask, l3_count) def add_ip_header(self, params, version): - for it, ep, i in self.iter_over_get_lists('/traffic', 'trafficItem', "configElement", 1): + for _, ep, i in self.iter_over_get_lists('/traffic', 'trafficItem', "configElement", 1): iter1 = (v['outer_l3'] for v in params.values() if str(v['id']) == str(i)) try: l3 = next(iter1, {}) @@ -194,21 +192,13 @@ class IxNextgen(object): except (KeyError, IndexError): continue - for ip, ip_bits, _ in self.iter_over_get_lists(ep, 'stack', 'field'): + for _, ip_bits, _ in self.iter_over_get_lists(ep, 'stack', 'field'): self.set_random_ip_multi_attributes(ip_bits, version, seeds, l3) self.ixnet.commit() def _connect(self, tg_cfg): self._cfg = self.get_config(tg_cfg) - - sys.path.append(self._cfg["py_lib_path"]) - # Import IxNetwork after getting ixia lib path - try: - import IxNetwork - except ImportError: - raise - self.ixnet = IxNetwork.IxNet() machine = self._cfg['machine'] @@ -292,7 +282,7 @@ class IxNextgen(object): self.update_ether_multi_attribute(ether, str(l2.get('srcmac', "00:00:00:00:00:01"))) def ix_update_ether(self, params): - for ti, ep, index in self.iter_over_get_lists('/traffic', 'trafficItem', + for _, ep, index in self.iter_over_get_lists('/traffic', 'trafficItem', "configElement", 1): iter1 = (v['outer_l2'] for v in params.values() if str(v['id']) == str(index)) try: @@ -300,7 +290,7 @@ class IxNextgen(object): except KeyError: continue - for ip, ether, _ in self.iter_over_get_lists(ep, 'stack', 'field'): + for _, ether, _ in self.iter_over_get_lists(ep, 'stack', 'field'): self.update_ether_multi_attributes(ether, l2) self.ixnet.commit() diff --git a/yardstick/network_services/nfvi/resource.py b/yardstick/network_services/nfvi/resource.py index dc5c46a86..0c0bf223a 100644 --- a/yardstick/network_services/nfvi/resource.py +++ b/yardstick/network_services/nfvi/resource.py @@ -27,6 +27,7 @@ from oslo_config import cfg from oslo_utils.encodeutils import safe_decode from yardstick import ssh +from yardstick.common.exceptions import ResourceCommandError from yardstick.common.task_template import finalize_for_yaml from yardstick.common.utils import validate_non_string_sequence from yardstick.network_services.nfvi.collectd import AmqpConsumer @@ -249,45 +250,46 @@ class ResourceProfile(object): if status != 0: LOG.error("cannot find OVS socket %s", socket_path) + def _start_rabbitmq(self, connection): + # Reset amqp queue + LOG.debug("reset and setup amqp to collect data from collectd") + # ensure collectd.conf.d exists to avoid error/warning + cmd_list = ["sudo mkdir -p /etc/collectd/collectd.conf.d", + "sudo service rabbitmq-server restart", + "sudo rabbitmqctl stop_app", + "sudo rabbitmqctl reset", + "sudo rabbitmqctl start_app", + "sudo rabbitmqctl add_user admin admin", + "sudo rabbitmqctl authenticate_user admin admin", + "sudo rabbitmqctl set_permissions -p / admin '.*' '.*' '.*'" + ] + for cmd in cmd_list: + exit_status, stdout, stderr = connection.execute(cmd) + if exit_status != 0: + raise ResourceCommandError(command=cmd, stderr=stderr) + + # check stdout for "sudo rabbitmqctl status" command + cmd = "sudo rabbitmqctl status" + _, stdout, stderr = connection.execute(cmd) + if not re.search("RabbitMQ", stdout): + LOG.error("rabbitmqctl status don't have RabbitMQ in running apps") + raise ResourceCommandError(command=cmd, stderr=stderr) + def _start_collectd(self, connection, bin_path): LOG.debug("Starting collectd to collect NFVi stats") - connection.execute('sudo pkill -x -9 collectd') collectd_path = os.path.join(bin_path, "collectd", "sbin", "collectd") config_file_path = os.path.join(bin_path, "collectd", "etc") + self._prepare_collectd_conf(config_file_path) + + connection.execute('sudo pkill -x -9 collectd') exit_status = connection.execute("which %s > /dev/null 2>&1" % collectd_path)[0] if exit_status != 0: LOG.warning("%s is not present disabling", collectd_path) - # disable auto-provisioning because it requires Internet access - # collectd_installer = os.path.join(bin_path, "collectd.sh") - # provision_tool(connection, collectd) - # http_proxy = os.environ.get('http_proxy', '') - # https_proxy = os.environ.get('https_proxy', '') - # connection.execute("sudo %s '%s' '%s'" % ( - # collectd_installer, http_proxy, https_proxy)) return if "ovs_stats" in self.plugins: self._setup_ovs_stats(connection) LOG.debug("Starting collectd to collect NFVi stats") - # ensure collectd.conf.d exists to avoid error/warning - connection.execute("sudo mkdir -p /etc/collectd/collectd.conf.d") - self._prepare_collectd_conf(config_file_path) - - # Reset amqp queue - LOG.debug("reset and setup amqp to collect data from collectd") - connection.execute("sudo rm -rf /var/lib/rabbitmq/mnesia/rabbit*") - connection.execute("sudo service rabbitmq-server start") - connection.execute("sudo rabbitmqctl stop_app") - connection.execute("sudo rabbitmqctl reset") - connection.execute("sudo rabbitmqctl start_app") - connection.execute("sudo service rabbitmq-server restart") - - LOG.debug("Creating admin user for rabbitmq in order to collect data from collectd") - connection.execute("sudo rabbitmqctl delete_user guest") - connection.execute("sudo rabbitmqctl add_user admin admin") - connection.execute("sudo rabbitmqctl authenticate_user admin admin") - connection.execute("sudo rabbitmqctl set_permissions -p / admin '.*' '.*' '.*'") - LOG.debug("Start collectd service..... %s second timeout", self.timeout) # intel_pmu plug requires large numbers of files open, so try to set # ulimit -n to a large value @@ -299,9 +301,10 @@ class ResourceProfile(object): """ Start system agent for NFVi collection on host """ if self.enable: try: + self._start_rabbitmq(self.connection) self._start_collectd(self.connection, bin_path) - except Exception: - LOG.exception("Exception during collectd start") + except ResourceCommandError as e: + LOG.exception("Exception during collectd and rabbitmq start: %s", str(e)) raise def start(self): diff --git a/yardstick/network_services/traffic_profile/prox_binsearch.py b/yardstick/network_services/traffic_profile/prox_binsearch.py index c3277fb12..7a84f1365 100644 --- a/yardstick/network_services/traffic_profile/prox_binsearch.py +++ b/yardstick/network_services/traffic_profile/prox_binsearch.py @@ -116,7 +116,6 @@ class ProxBinSearchProfile(ProxProfile): self.current_lower = test_value successful_pkt_loss = result.pkt_loss samples = result.get_samples(pkt_size, successful_pkt_loss, port_samples) - samples["TxThroughput"] = samples["TxThroughput"] * 1000 * 1000 # store results with success tag in influxdb success_samples = {'Success_' + key: value for key, value in samples.items()} diff --git a/yardstick/network_services/vnf_generic/vnf/base.py b/yardstick/network_services/vnf_generic/vnf/base.py index a776b0989..9ceac3167 100644 --- a/yardstick/network_services/vnf_generic/vnf/base.py +++ b/yardstick/network_services/vnf_generic/vnf/base.py @@ -195,6 +195,18 @@ class GenericVNF(object): :return: {"kpi": value, "kpi2": value} """ + @abc.abstractmethod + def start_collect(self): + """Start KPI collection + :return: None + """ + + @abc.abstractmethod + def stop_collect(self): + """Stop KPI collection + :return: None + """ + @six.add_metaclass(abc.ABCMeta) class GenericTrafficGen(GenericVNF): @@ -254,3 +266,23 @@ class GenericTrafficGen(GenericVNF): :return: True/False """ pass + + def start_collect(self): + """Start KPI collection. + + Traffic measurements are always collected during injection. + + Optional. + + :return: True/False + """ + pass + + def stop_collect(self): + """Stop KPI collection. + + Optional. + + :return: True/False + """ + pass diff --git a/yardstick/network_services/vnf_generic/vnf/sample_vnf.py b/yardstick/network_services/vnf_generic/vnf/sample_vnf.py index d8918b2c3..16873611e 100644 --- a/yardstick/network_services/vnf_generic/vnf/sample_vnf.py +++ b/yardstick/network_services/vnf_generic/vnf/sample_vnf.py @@ -35,7 +35,6 @@ from yardstick.common import utils from yardstick.network_services import constants from yardstick.network_services.helpers.dpdkbindnic_helper import DpdkBindHelper, DpdkNode from yardstick.network_services.helpers.samplevnf_helper import MultiPortConfig -from yardstick.network_services.helpers.samplevnf_helper import PortPairs from yardstick.network_services.nfvi.resource import ResourceProfile from yardstick.network_services.utils import get_nsb_option from yardstick.network_services.vnf_generic.vnf.base import GenericTrafficGen @@ -60,6 +59,7 @@ class SetupEnvHelper(object): self.vnfd_helper = vnfd_helper self.ssh_helper = ssh_helper self.scenario_helper = scenario_helper + self.collectd_options = {} def build_config(self): raise NotImplementedError @@ -234,12 +234,6 @@ class DpdkVnfSetupEnvHelper(SetupEnvHelper): if exit_status == 0: return - def get_collectd_options(self): - options = self.scenario_helper.all_options.get("collectd", {}) - # override with specific node settings - options.update(self.scenario_helper.options.get("collectd", {})) - return options - def _setup_resources(self): # what is this magic? how do we know which socket is for which port? # what about quad-socket? @@ -252,11 +246,11 @@ class DpdkVnfSetupEnvHelper(SetupEnvHelper): # this won't work because we don't have DPDK port numbers yet ports = sorted(self.vnfd_helper.interfaces, key=self.vnfd_helper.port_num) port_names = (intf["name"] for intf in ports) - collectd_options = self.get_collectd_options() - plugins = collectd_options.get("plugins", {}) + plugins = self.collectd_options.get("plugins", {}) + interval = self.collectd_options.get("interval") # we must set timeout to be the same as the VNF otherwise KPIs will die before VNF return ResourceProfile(self.vnfd_helper.mgmt_interface, port_names=port_names, - plugins=plugins, interval=collectd_options.get("interval"), + plugins=plugins, interval=interval, timeout=self.scenario_helper.timeout) def _check_interface_fields(self): @@ -666,49 +660,6 @@ class SampleVNF(GenericVNF): self.vnf_port_pairs = None self._vnf_process = None - def _build_ports(self): - self._port_pairs = PortPairs(self.vnfd_helper.interfaces) - self.networks = self._port_pairs.networks - self.uplink_ports = self.vnfd_helper.port_nums(self._port_pairs.uplink_ports) - self.downlink_ports = self.vnfd_helper.port_nums(self._port_pairs.downlink_ports) - self.my_ports = self.vnfd_helper.port_nums(self._port_pairs.all_ports) - - def _get_route_data(self, route_index, route_type): - route_iter = iter(self.vnfd_helper.vdu0.get('nd_route_tbl', [])) - for _ in range(route_index): - next(route_iter, '') - return next(route_iter, {}).get(route_type, '') - - def _get_port0localip6(self): - return_value = self._get_route_data(0, 'network') - LOG.info("_get_port0localip6 : %s", return_value) - return return_value - - def _get_port1localip6(self): - return_value = self._get_route_data(1, 'network') - LOG.info("_get_port1localip6 : %s", return_value) - return return_value - - def _get_port0prefixlen6(self): - return_value = self._get_route_data(0, 'netmask') - LOG.info("_get_port0prefixlen6 : %s", return_value) - return return_value - - def _get_port1prefixlen6(self): - return_value = self._get_route_data(1, 'netmask') - LOG.info("_get_port1prefixlen6 : %s", return_value) - return return_value - - def _get_port0gateway6(self): - return_value = self._get_route_data(0, 'network') - LOG.info("_get_port0gateway6 : %s", return_value) - return return_value - - def _get_port1gateway6(self): - return_value = self._get_route_data(1, 'network') - LOG.info("_get_port1gateway6 : %s", return_value) - return return_value - def _start_vnf(self): self.queue_wrapper = QueueFileWrapper(self.q_in, self.q_out, self.VNF_PROMPT) name = "{}-{}-{}".format(self.name, self.APP_NAME, os.getpid()) @@ -719,6 +670,7 @@ class SampleVNF(GenericVNF): pass def instantiate(self, scenario_cfg, context_cfg): + self._update_collectd_options(scenario_cfg, context_cfg) self.scenario_helper.scenario_cfg = scenario_cfg self.context_cfg = context_cfg self.nfvi_context = Context.get_context_from_server(self.scenario_helper.nodes[self.name]) @@ -730,6 +682,54 @@ class SampleVNF(GenericVNF): self.resource_helper.setup() self._start_vnf() + def _update_collectd_options(self, scenario_cfg, context_cfg): + """Update collectd configuration options + This function retrieves all collectd options contained in the test case + + definition builds a single dictionary combining them. The following fragment + represents a test case with the collectd options and priorities (1 highest, 3 lowest): + --- + schema: yardstick:task:0.1 + scenarios: + - type: NSPerf + nodes: + tg__0: trafficgen_1.yardstick + vnf__0: vnf.yardstick + options: + collectd: + <options> # COLLECTD priority 3 + vnf__0: + collectd: + plugins: + load + <options> # COLLECTD priority 2 + context: + type: Node + name: yardstick + nfvi_type: baremetal + file: /etc/yardstick/nodes/pod_ixia.yaml # COLLECTD priority 1 + """ + scenario_options = scenario_cfg.get('options', {}) + generic_options = scenario_options.get('collectd', {}) + scenario_node_options = scenario_options.get(self.name, {})\ + .get('collectd', {}) + context_node_options = context_cfg.get('nodes', {})\ + .get(self.name, {}).get('collectd', {}) + + options = generic_options + self._update_options(options, scenario_node_options) + self._update_options(options, context_node_options) + + self.setup_helper.collectd_options = options + + def _update_options(self, options, additional_options): + """Update collectd options and plugins dictionary""" + for k, v in additional_options.items(): + if isinstance(v, dict) and k in options: + options[k].update(v) + else: + options[k] = v + def wait_for_instantiate(self): buf = [] time.sleep(self.WAIT_TIME) # Give some time for config to load @@ -745,7 +745,6 @@ class SampleVNF(GenericVNF): LOG.info("%s VNF is up and running.", self.APP_NAME) self._vnf_up_post() self.queue_wrapper.clear() - self.resource_helper.start_collect() return self._vnf_process.exitcode if "PANIC" in message: @@ -758,6 +757,12 @@ class SampleVNF(GenericVNF): # by other VNF output self.q_in.put('\r\n') + def start_collect(self): + self.resource_helper.start_collect() + + def stop_collect(self): + self.resource_helper.stop_collect() + def _build_run_kwargs(self): self.run_kwargs = { 'stdin': self.queue_wrapper, diff --git a/yardstick/orchestrator/heat.py b/yardstick/orchestrator/heat.py index 5afa4151e..e0c0db262 100644 --- a/yardstick/orchestrator/heat.py +++ b/yardstick/orchestrator/heat.py @@ -22,13 +22,13 @@ import time from oslo_serialization import jsonutils from oslo_utils import encodeutils -import shade from shade._heat import event_utils -import yardstick.common.openstack_utils as op_utils +from yardstick.common import constants as consts from yardstick.common import exceptions from yardstick.common import template_format -from yardstick.common import constants as consts +from yardstick.common import openstack_utils as op_utils + log = logging.getLogger(__name__) @@ -41,10 +41,11 @@ _DEPLOYED_STACKS = {} class HeatStack(object): """Represents a Heat stack (deployed template) """ - def __init__(self, name): + def __init__(self, name, os_cloud_config=None): self.name = name self.outputs = {} - self._cloud = shade.openstack_cloud() + os_cloud_config = {} if not os_cloud_config else os_cloud_config + self._cloud = op_utils.get_shade_client(**os_cloud_config) self._stack = None def _update_stack_tracking(self): @@ -152,10 +153,12 @@ name (i.e. %s). # short hand for resources part of template self.resources = self._template['resources'] - def __init__(self, name, template_file=None, heat_parameters=None): + def __init__(self, name, template_file=None, heat_parameters=None, + os_cloud_config=None): self.name = name self.keystone_client = None self.heat_parameters = {} + self._os_cloud_config = {} if not os_cloud_config else os_cloud_config # heat_parameters is passed to heat in stack create, empty dict when # yardstick creates the template (no get_param in resources part) @@ -622,7 +625,7 @@ name (i.e. %s). log.info("Creating stack '%s' START", self.name) start_time = time.time() - stack = HeatStack(self.name) + stack = HeatStack(self.name, os_cloud_config=self._os_cloud_config) stack.create(self._template, self.heat_parameters, block, timeout) if not block: diff --git a/yardstick/tests/integration/dummy-scenario-heat-context.yaml b/yardstick/tests/integration/dummy-scenario-heat-context.yaml index 7c980b412..45a39951a 100644 --- a/yardstick/tests/integration/dummy-scenario-heat-context.yaml +++ b/yardstick/tests/integration/dummy-scenario-heat-context.yaml @@ -6,6 +6,7 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## +{% set context_name = context_name or "demo" %} --- # Sample Heat context config with Dummy context @@ -22,9 +23,9 @@ scenarios: context: name: {{ context_name }} - image: cirros-0.3.5 - flavor: cirros256 - user: cirros + image: yardstick-image + flavor: yardstick-flavor + user: ubuntu servers: athena: diff --git a/yardstick/tests/unit/benchmark/contexts/test_base.py b/yardstick/tests/unit/benchmark/contexts/test_base.py index 153c6a527..b19883479 100644 --- a/yardstick/tests/unit/benchmark/contexts/test_base.py +++ b/yardstick/tests/unit/benchmark/contexts/test_base.py @@ -25,6 +25,7 @@ class FlagsTestCase(unittest.TestCase): def test___init__(self): self.assertFalse(self.flags.no_setup) self.assertFalse(self.flags.no_teardown) + self.assertEqual({'verify': False}, self.flags.os_cloud_config) def test___init__with_flags(self): flags = base.Flags(no_setup=True) @@ -32,10 +33,12 @@ class FlagsTestCase(unittest.TestCase): self.assertFalse(flags.no_teardown) def test_parse(self): - self.flags.parse(no_setup=True, no_teardown="False") + self.flags.parse(no_setup=True, no_teardown='False', + os_cloud_config={'verify': True}) self.assertTrue(self.flags.no_setup) - self.assertEqual(self.flags.no_teardown, "False") + self.assertEqual('False', self.flags.no_teardown) + self.assertEqual({'verify': True}, self.flags.os_cloud_config) def test_parse_forbidden_flags(self): self.flags.parse(foo=42) diff --git a/yardstick/tests/unit/benchmark/contexts/test_heat.py b/yardstick/tests/unit/benchmark/contexts/test_heat.py index 1d491fe60..ebb1d69ba 100644 --- a/yardstick/tests/unit/benchmark/contexts/test_heat.py +++ b/yardstick/tests/unit/benchmark/contexts/test_heat.py @@ -234,7 +234,7 @@ class HeatContextTestCase(unittest.TestCase): @mock.patch.object(os.path, 'exists', return_value=False) @mock.patch.object(ssh.SSH, 'gen_keys') - @mock.patch('yardstick.benchmark.contexts.heat.HeatTemplate') + @mock.patch.object(heat, 'HeatTemplate') def test_deploy(self, mock_template, mock_genkeys, mock_path_exists): self.test_context._name = 'foo' self.test_context._task_id = '1234567890' @@ -245,9 +245,10 @@ class HeatContextTestCase(unittest.TestCase): self.test_context.get_neutron_info = mock.MagicMock() self.test_context.deploy() - mock_template.assert_called_with('foo-12345678', - '/bar/baz/some-heat-file', - {'image': 'cirros'}) + mock_template.assert_called_with( + 'foo-12345678', template_file='/bar/baz/some-heat-file', + heat_parameters={'image': 'cirros'}, + os_cloud_config=self.test_context._flags.os_cloud_config) self.assertIsNotNone(self.test_context.stack) key_filename = ''.join( [consts.YARDSTICK_ROOT_PATH, diff --git a/yardstick/tests/unit/benchmark/scenarios/lib/test_attach_volume.py b/yardstick/tests/unit/benchmark/scenarios/lib/test_attach_volume.py index 2964ecc14..bb7fa4536 100644 --- a/yardstick/tests/unit/benchmark/scenarios/lib/test_attach_volume.py +++ b/yardstick/tests/unit/benchmark/scenarios/lib/test_attach_volume.py @@ -6,21 +6,51 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## +from oslo_utils import uuidutils import unittest import mock -from yardstick.benchmark.scenarios.lib.attach_volume import AttachVolume +from yardstick.common import openstack_utils +from yardstick.common import exceptions +from yardstick.benchmark.scenarios.lib import attach_volume class AttachVolumeTestCase(unittest.TestCase): - @mock.patch('yardstick.common.openstack_utils.attach_server_volume') - def test_attach_volume(self, mock_attach_server_volume): - options = { - 'volume_id': '123-456-000', - 'server_id': '000-123-456' - } - args = {"options": options} - obj = AttachVolume(args, {}) - obj.run({}) - mock_attach_server_volume.assert_called_once() + def setUp(self): + + self._mock_attach_volume_to_server = mock.patch.object( + openstack_utils, 'attach_volume_to_server') + self.mock_attach_volume_to_server = ( + self._mock_attach_volume_to_server.start()) + self._mock_get_shade_client = mock.patch.object( + openstack_utils, 'get_shade_client') + self.mock_get_shade_client = self._mock_get_shade_client.start() + self._mock_log = mock.patch.object(attach_volume, 'LOG') + self.mock_log = self._mock_log.start() + _uuid = uuidutils.generate_uuid() + self.args = {'options': {'server_name_or_id': _uuid, + 'volume_name_or_id': _uuid}} + self.result = {} + self.addCleanup(self._stop_mock) + self.attachvol_obj = attach_volume.AttachVolume(self.args, mock.ANY) + + def _stop_mock(self): + self._mock_attach_volume_to_server.stop() + self._mock_get_shade_client.stop() + self._mock_log.stop() + + def test_run(self): + self.mock_attach_volume_to_server.return_value = True + self.assertIsNone(self.attachvol_obj.run(self.result)) + self.assertEqual({'attach_volume': 1}, self.result) + self.mock_log.info.asset_called_once_with( + 'Attach volume to server successful!') + + def test_run_fail(self): + self.mock_attach_volume_to_server.return_value = False + with self.assertRaises(exceptions.ScenarioAttachVolumeError): + self.attachvol_obj.run(self.result) + self.assertEqual({'attach_volume': 0}, self.result) + self.mock_log.error.assert_called_once_with( + 'Attach volume to server failed!') diff --git a/yardstick/tests/unit/benchmark/scenarios/lib/test_create_volume.py b/yardstick/tests/unit/benchmark/scenarios/lib/test_create_volume.py index 30333dda8..f91d2c3f4 100644 --- a/yardstick/tests/unit/benchmark/scenarios/lib/test_create_volume.py +++ b/yardstick/tests/unit/benchmark/scenarios/lib/test_create_volume.py @@ -6,95 +6,53 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## -import mock +from oslo_utils import uuidutils import unittest +import mock +from yardstick.common import openstack_utils +from yardstick.common import exceptions from yardstick.benchmark.scenarios.lib import create_volume class CreateVolumeTestCase(unittest.TestCase): def setUp(self): - self._mock_cinder_client = mock.patch( - 'yardstick.common.openstack_utils.get_cinder_client') - self.mock_cinder_client = self._mock_cinder_client.start() - self._mock_glance_client = mock.patch( - 'yardstick.common.openstack_utils.get_glance_client') - self.mock_glance_client = self._mock_glance_client.start() - self.addCleanup(self._stop_mock) - - self.scenario_cfg = { - "options" : - { - 'volume_name': 'yardstick_test_volume_01', - 'size': '256', - 'image': 'cirros-0.3.5' - } - } - self.scenario = create_volume.CreateVolume( - scenario_cfg=self.scenario_cfg, - context_cfg={}) + self._mock_create_volume = mock.patch.object( + openstack_utils, 'create_volume') + self.mock_create_volume = ( + self._mock_create_volume.start()) + self._mock_get_shade_client = mock.patch.object( + openstack_utils, 'get_shade_client') + self.mock_get_shade_client = self._mock_get_shade_client.start() + self._mock_log = mock.patch.object(create_volume, 'LOG') + self.mock_log = self._mock_log.start() + self.args = {'options': {'size_gb': 1}} + self.result = {} + + self.cvolume_obj = create_volume.CreateVolume(self.args, mock.ANY) + self.addCleanup(self._stop_mock) def _stop_mock(self): - self._mock_cinder_client.stop() - self._mock_glance_client.stop() - - def test_init(self): - self.mock_cinder_client.return_value = "All volumes are equal" - self.mock_glance_client.return_value = "Images are more equal" - - expected_vol_name = self.scenario_cfg["options"]["volume_name"] - expected_vol_size = self.scenario_cfg["options"]["size"] - expected_im_name = self.scenario_cfg["options"]["image"] - expected_im_id = None - - scenario = create_volume.CreateVolume( - scenario_cfg=self.scenario_cfg, - context_cfg={}) - - self.assertEqual(expected_vol_name, scenario.volume_name) - self.assertEqual(expected_vol_size, scenario.volume_size) - self.assertEqual(expected_im_name, scenario.image_name) - self.assertEqual(expected_im_id, scenario.image_id) - self.assertEqual("All volumes are equal", scenario.cinder_client) - self.assertEqual("Images are more equal", scenario.glance_client) - - def test_setup(self): - self.assertFalse(self.scenario.setup_done) - self.scenario.setup() - self.assertTrue(self.scenario.setup_done) - - @mock.patch('yardstick.common.openstack_utils.create_volume') - @mock.patch('yardstick.common.openstack_utils.get_image_id') - def test_run(self, mock_image_id, mock_create_volume): - self.scenario.run() - - mock_image_id.assert_called_once() - mock_create_volume.assert_called_once() - - @mock.patch.object(create_volume.CreateVolume, 'setup') - def test_run_no_setup(self, scenario_setup): - self.scenario.setup_done = False - self.scenario.run() - scenario_setup.assert_called_once() - - @mock.patch('yardstick.common.openstack_utils.create_volume') - @mock.patch('yardstick.common.openstack_utils.get_image_id') - @mock.patch('yardstick.common.openstack_utils.get_cinder_client') - @mock.patch('yardstick.common.openstack_utils.get_glance_client') - def test_create_volume(self, mock_get_glance_client, - mock_get_cinder_client, mock_image_id, - mock_create_volume): - options = { - 'volume_name': 'yardstick_test_volume_01', - 'size': '256', - 'image': 'cirros-0.3.5' - } - args = {"options": options} - scenario = create_volume.CreateVolume(args, {}) - scenario.run() - mock_create_volume.assert_called_once() - mock_image_id.assert_called_once() - mock_get_glance_client.assert_called_once() - mock_get_cinder_client.assert_called_once() + self._mock_create_volume.stop() + self._mock_get_shade_client.stop() + self._mock_log.stop() + + def test_run(self): + _uuid = uuidutils.generate_uuid() + self.cvolume_obj.scenario_cfg = {'output': 'id'} + self.mock_create_volume.return_value = {'name': 'yardstick_volume', + 'id': _uuid, + 'status': 'available'} + output = self.cvolume_obj.run(self.result) + self.assertDictEqual({'volume_create': 1}, self.result) + self.assertDictEqual({'id': _uuid}, output) + self.mock_log.info.asset_called_once_with('Create volume successful!') + + def test_run_fail(self): + self.mock_create_volume.return_value = None + with self.assertRaises(exceptions.ScenarioCreateVolumeError): + self.cvolume_obj.run(self.result) + self.assertDictEqual({'volume_create': 0}, self.result) + self.mock_log.error.assert_called_once_with('Create volume failed!') diff --git a/yardstick/tests/unit/benchmark/scenarios/lib/test_delete_volume.py b/yardstick/tests/unit/benchmark/scenarios/lib/test_delete_volume.py index 93f76e819..0db16f396 100644 --- a/yardstick/tests/unit/benchmark/scenarios/lib/test_delete_volume.py +++ b/yardstick/tests/unit/benchmark/scenarios/lib/test_delete_volume.py @@ -9,19 +9,44 @@ import unittest import mock -from yardstick.benchmark.scenarios.lib.delete_volume import DeleteVolume +from yardstick.common import openstack_utils +from yardstick.common import exceptions +from yardstick.benchmark.scenarios.lib import delete_volume class DeleteVolumeTestCase(unittest.TestCase): - @mock.patch('yardstick.common.openstack_utils.get_cinder_client') - @mock.patch('yardstick.common.openstack_utils.delete_volume') - def test_delete_volume(self, mock_get_cinder_client, mock_delete_volume): - options = { - 'volume_id': '123-123-123' - } - args = {"options": options} - obj = DeleteVolume(args, {}) - obj.run({}) - mock_get_cinder_client.assert_called_once() - mock_delete_volume.assert_called_once() + def setUp(self): + self._mock_delete_volume = mock.patch.object( + openstack_utils, 'delete_volume') + self.mock_delete_volume = ( + self._mock_delete_volume.start()) + self._mock_get_shade_client = mock.patch.object( + openstack_utils, 'get_shade_client') + self.mock_get_shade_client = self._mock_get_shade_client.start() + self._mock_log = mock.patch.object(delete_volume, 'LOG') + self.mock_log = self._mock_log.start() + self.args = {'options': {'name_or_id': 'yardstick_volume'}} + self.result = {} + + self.delvol_obj = delete_volume.DeleteVolume(self.args, mock.ANY) + + self.addCleanup(self._stop_mock) + + def _stop_mock(self): + self._mock_delete_volume.stop() + self._mock_get_shade_client.stop() + self._mock_log.stop() + + def test_run(self): + self.mock_delete_volume.return_value = True + self.assertIsNone(self.delvol_obj.run(self.result)) + self.assertEqual({'delete_volume': 1}, self.result) + self.mock_log.info.assert_called_once_with('Delete volume successful!') + + def test_run_fail(self): + self.mock_delete_volume.return_value = False + with self.assertRaises(exceptions.ScenarioDeleteVolumeError): + self.delvol_obj.run(self.result) + self.assertEqual({'delete_volume': 0}, self.result) + self.mock_log.error.assert_called_once_with('Delete volume failed!') diff --git a/yardstick/tests/unit/benchmark/scenarios/lib/test_detach_volume.py b/yardstick/tests/unit/benchmark/scenarios/lib/test_detach_volume.py index 9794d2129..2bc57f495 100644 --- a/yardstick/tests/unit/benchmark/scenarios/lib/test_detach_volume.py +++ b/yardstick/tests/unit/benchmark/scenarios/lib/test_detach_volume.py @@ -6,21 +6,52 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## +from oslo_utils import uuidutils import unittest import mock -from yardstick.benchmark.scenarios.lib.detach_volume import DetachVolume +from yardstick.common import openstack_utils +from yardstick.common import exceptions +from yardstick.benchmark.scenarios.lib import detach_volume class DetachVolumeTestCase(unittest.TestCase): - @mock.patch('yardstick.common.openstack_utils.detach_volume') - def test_detach_volume(self, mock_detach_volume): - options = { - 'server_id': '321-321-321', - 'volume_id': '123-123-123' - } - args = {"options": options} - obj = DetachVolume(args, {}) - obj.run({}) - mock_detach_volume.assert_called_once() + def setUp(self): + self._mock_detach_volume = mock.patch.object( + openstack_utils, 'detach_volume') + self.mock_detach_volume = ( + self._mock_detach_volume.start()) + self._mock_get_shade_client = mock.patch.object( + openstack_utils, 'get_shade_client') + self.mock_get_shade_client = self._mock_get_shade_client.start() + self._mock_log = mock.patch.object(detach_volume, 'LOG') + self.mock_log = self._mock_log.start() + _uuid = uuidutils.generate_uuid() + self.args = {'options': {'server_name_or_id': _uuid, + 'volume_name_or_id': _uuid}} + self.result = {} + + self.detachvol_obj = detach_volume.DetachVolume(self.args, mock.ANY) + + self.addCleanup(self._stop_mock) + + def _stop_mock(self): + self._mock_detach_volume.stop() + self._mock_get_shade_client.stop() + self._mock_log.stop() + + def test_run(self): + self.mock_detach_volume.return_value = True + self.assertIsNone(self.detachvol_obj.run(self.result)) + self.assertEqual({'detach_volume': 1}, self.result) + self.mock_log.info.assert_called_once_with( + 'Detach volume from server successful!') + + def test_run_fail(self): + self.mock_detach_volume.return_value = False + with self.assertRaises(exceptions.ScenarioDetachVolumeError): + self.detachvol_obj.run(self.result) + self.assertEqual({'detach_volume': 0}, self.result) + self.mock_log.error.assert_called_once_with( + 'Detach volume from server failed!') diff --git a/yardstick/tests/unit/benchmark/scenarios/lib/test_get_flavor.py b/yardstick/tests/unit/benchmark/scenarios/lib/test_get_flavor.py index 15a6f7c8f..1c1364348 100644 --- a/yardstick/tests/unit/benchmark/scenarios/lib/test_get_flavor.py +++ b/yardstick/tests/unit/benchmark/scenarios/lib/test_get_flavor.py @@ -6,20 +6,52 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## +from oslo_utils import uuidutils import unittest import mock -from yardstick.benchmark.scenarios.lib.get_flavor import GetFlavor +from yardstick.common import openstack_utils +from yardstick.common import exceptions +from yardstick.benchmark.scenarios.lib import get_flavor class GetFlavorTestCase(unittest.TestCase): - @mock.patch('yardstick.common.openstack_utils.get_flavor_by_name') - def test_get_flavor(self, mock_get_flavor_by_name): - options = { - 'flavor_name': 'yardstick_test_flavor' - } - args = {"options": options} - obj = GetFlavor(args, {}) - obj.run({}) - mock_get_flavor_by_name.assert_called_once() + def setUp(self): + + self._mock_get_flavor = mock.patch.object( + openstack_utils, 'get_flavor') + self.mock_get_flavor = self._mock_get_flavor.start() + self._mock_get_shade_client = mock.patch.object( + openstack_utils, 'get_shade_client') + self.mock_get_shade_client = self._mock_get_shade_client.start() + self._mock_log = mock.patch.object(get_flavor, 'LOG') + self.mock_log = self._mock_log.start() + self.args = {'options': {'name_or_id': 'yardstick_flavor'}} + self.result = {} + + self.getflavor_obj = get_flavor.GetFlavor(self.args, mock.ANY) + self.addCleanup(self._stop_mock) + + def _stop_mock(self): + self._mock_get_flavor.stop() + self._mock_get_shade_client.stop() + self._mock_log.stop() + + def test_run(self): + _uuid = uuidutils.generate_uuid() + self.getflavor_obj.scenario_cfg = {'output': 'flavor'} + self.mock_get_flavor.return_value = ( + {'name': 'flavor-name', 'id': _uuid}) + output = self.getflavor_obj.run(self.result) + self.assertDictEqual({'get_flavor': 1}, self.result) + self.assertDictEqual({'flavor': {'name': 'flavor-name', 'id': _uuid}}, + output) + self.mock_log.info.asset_called_once_with('Get flavor successful!') + + def test_run_fail(self): + self.mock_get_flavor.return_value = None + with self.assertRaises(exceptions.ScenarioGetFlavorError): + self.getflavor_obj.run(self.result) + self.assertDictEqual({'get_flavor': 0}, self.result) + self.mock_log.error.assert_called_once_with('Get flavor failed!') diff --git a/yardstick/tests/unit/benchmark/scenarios/lib/test_get_server.py b/yardstick/tests/unit/benchmark/scenarios/lib/test_get_server.py index 83ec903bc..5b5329cb0 100644 --- a/yardstick/tests/unit/benchmark/scenarios/lib/test_get_server.py +++ b/yardstick/tests/unit/benchmark/scenarios/lib/test_get_server.py @@ -6,37 +6,52 @@ # which accompanies this distribution, and is available at # http://www.apache.org/licenses/LICENSE-2.0 ############################################################################## +from oslo_utils import uuidutils import unittest import mock -from yardstick.benchmark.scenarios.lib.get_server import GetServer +from yardstick.common import openstack_utils +from yardstick.common import exceptions +from yardstick.benchmark.scenarios.lib import get_server class GetServerTestCase(unittest.TestCase): - @mock.patch('yardstick.common.openstack_utils.get_server_by_name') - @mock.patch('yardstick.common.openstack_utils.get_nova_client') - def test_get_server_with_name(self, mock_get_nova_client, mock_get_server_by_name): - scenario_cfg = { - 'options': { - 'server_name': 'yardstick_server' - }, - 'output': 'status server' - } - obj = GetServer(scenario_cfg, {}) - obj.run({}) - mock_get_nova_client.assert_called_once() - mock_get_server_by_name.assert_called_once() - - @mock.patch('yardstick.common.openstack_utils.get_nova_client') - def test_get_server_with_id(self, mock_get_nova_client): - scenario_cfg = { - 'options': { - 'server_id': '1' - }, - 'output': 'status server' - } - mock_get_nova_client().servers.get.return_value = None - obj = GetServer(scenario_cfg, {}) - obj.run({}) - mock_get_nova_client.assert_called() + def setUp(self): + + self._mock_get_server = mock.patch.object( + openstack_utils, 'get_server') + self.mock_get_server = self._mock_get_server.start() + self._mock_get_shade_client = mock.patch.object( + openstack_utils, 'get_shade_client') + self.mock_get_shade_client = self._mock_get_shade_client.start() + self._mock_log = mock.patch.object(get_server, 'LOG') + self.mock_log = self._mock_log.start() + self.args = {'options': {'name_or_id': 'yardstick_key'}} + self.result = {} + + self.getserver_obj = get_server.GetServer(self.args, mock.ANY) + self.addCleanup(self._stop_mock) + + def _stop_mock(self): + self._mock_get_server.stop() + self._mock_get_shade_client.stop() + self._mock_log.stop() + + def test_run(self): + _uuid = uuidutils.generate_uuid() + self.getserver_obj.scenario_cfg = {'output': 'server'} + self.mock_get_server.return_value = ( + {'name': 'server-name', 'id': _uuid}) + output = self.getserver_obj.run(self.result) + self.assertDictEqual({'get_server': 1}, self.result) + self.assertDictEqual({'server': {'name': 'server-name', 'id': _uuid}}, + output) + self.mock_log.info.asset_called_once_with('Get Server successful!') + + def test_run_fail(self): + self.mock_get_server.return_value = None + with self.assertRaises(exceptions.ScenarioGetServerError): + self.getserver_obj.run(self.result) + self.assertDictEqual({'get_server': 0}, self.result) + self.mock_log.error.assert_called_once_with('Get Server failed!') diff --git a/yardstick/tests/unit/common/test_openstack_utils.py b/yardstick/tests/unit/common/test_openstack_utils.py index 4dc4a7082..a1a4af2e9 100644 --- a/yardstick/tests/unit/common/test_openstack_utils.py +++ b/yardstick/tests/unit/common/test_openstack_utils.py @@ -10,8 +10,10 @@ from oslo_utils import uuidutils import unittest import mock - +import shade from shade import exc + +from yardstick.common import constants from yardstick.common import openstack_utils @@ -35,6 +37,29 @@ class GetHeatApiVersionTestCase(unittest.TestCase): self.assertEqual(api_version, expected_result) +class GetShadeClientTestCase(unittest.TestCase): + + @mock.patch.object(shade, 'openstack_cloud', return_value='os_client') + def test_get_shade_client(self, mock_openstack_cloud): + os_cloud_config = {'param1': True, 'param2': 'value2'} + self.assertEqual('os_client', + openstack_utils.get_shade_client(**os_cloud_config)) + os_cloud_config.update(constants.OS_CLOUD_DEFAULT_CONFIG) + mock_openstack_cloud.assert_called_once_with(**os_cloud_config) + + mock_openstack_cloud.reset_mock() + os_cloud_config = {'verify': True, 'param2': 'value2'} + self.assertEqual('os_client', + openstack_utils.get_shade_client(**os_cloud_config)) + mock_openstack_cloud.assert_called_once_with(**os_cloud_config) + + @mock.patch.object(shade, 'openstack_cloud', return_value='os_client') + def test_get_shade_client_no_parameters(self, mock_openstack_cloud): + self.assertEqual('os_client', openstack_utils.get_shade_client()) + mock_openstack_cloud.assert_called_once_with( + **constants.OS_CLOUD_DEFAULT_CONFIG) + + class DeleteNeutronNetTestCase(unittest.TestCase): def setUp(self): @@ -445,3 +470,189 @@ class DeleteKeypairTestCase(unittest.TestCase): 'key_name') mock_logger.error.assert_called_once() self.assertFalse(output) + + +class AttachVolumeToServerTestCase(unittest.TestCase): + + def test_attach_volume_to_server(self): + self.mock_shade_client = mock.Mock() + self.mock_shade_client.get_server.return_value = {'server_dict'} + self.mock_shade_client.get_volume.return_value = {'volume_dict'} + self.mock_shade_client.attach_volume.return_value = True + output = openstack_utils.attach_volume_to_server( + self.mock_shade_client, 'server_name_or_id', 'volume_name_or_id') + self.assertTrue(output) + + @mock.patch.object(openstack_utils, 'log') + def test_attach_volume_to_server_fail(self, mock_logger): + self.mock_shade_client = mock.Mock() + self.mock_shade_client.attach_volume.side_effect = ( + exc.OpenStackCloudException('error message')) + output = openstack_utils.attach_volume_to_server( + self.mock_shade_client, 'server_name_or_id', 'volume_name_or_id') + mock_logger.error.assert_called_once() + self.assertFalse(output) + + +class GetServerTestCase(unittest.TestCase): + + def test_get_server(self): + self.mock_shade_client = mock.Mock() + _uuid = uuidutils.generate_uuid() + self.mock_shade_client.get_server.return_value = { + 'name': 'server_name', 'id': _uuid} + output = openstack_utils.get_server(self.mock_shade_client, + 'server_name_or_id') + self.assertEqual({'name': 'server_name', 'id': _uuid}, output) + + @mock.patch.object(openstack_utils, 'log') + def test_get_server_exception(self, mock_logger): + self.mock_shade_client = mock.Mock() + self.mock_shade_client.get_server.side_effect = ( + exc.OpenStackCloudException('error message')) + output = openstack_utils.get_server(self.mock_shade_client, + 'server_name_or_id') + mock_logger.error.assert_called_once() + self.assertIsNone(output) + + +class GetFlavorTestCase(unittest.TestCase): + + def test_get_flavor(self): + self.mock_shade_client = mock.Mock() + _uuid = uuidutils.generate_uuid() + self.mock_shade_client.get_flavor.return_value = { + 'name': 'flavor_name', 'id': _uuid} + output = openstack_utils.get_flavor(self.mock_shade_client, + 'flavor_name_or_id') + self.assertEqual({'name': 'flavor_name', 'id': _uuid}, output) + + @mock.patch.object(openstack_utils, 'log') + def test_get_flavor_exception(self, mock_logger): + self.mock_shade_client = mock.Mock() + self.mock_shade_client.get_flavor.side_effect = ( + exc.OpenStackCloudException('error message')) + output = openstack_utils.get_flavor(self.mock_shade_client, + 'flavor_name_or_id') + mock_logger.error.assert_called_once() + self.assertIsNone(output) + +# ********************************************* +# CINDER +# ********************************************* + + +class GetVolumeIDTestCase(unittest.TestCase): + + def test_get_volume_id(self): + self.mock_shade_client = mock.Mock() + _uuid = uuidutils.generate_uuid() + self.mock_shade_client.get_volume_id.return_value = _uuid + output = openstack_utils.get_volume_id(self.mock_shade_client, + 'volume_name') + self.assertEqual(_uuid, output) + + def test_get_volume_id_None(self): + self.mock_shade_client = mock.Mock() + self.mock_shade_client.get_volume_id.return_value = None + output = openstack_utils.get_volume_id(self.mock_shade_client, + 'volume_name') + self.assertIsNone(output) + + +class GetVolumeTestCase(unittest.TestCase): + + def setUp(self): + self.mock_shade_client = mock.Mock() + self.mock_shade_client.get_volume = mock.Mock() + + def test_get_volume(self): + self.mock_shade_client.get_volume.return_value = {'volume'} + output = openstack_utils.get_volume(self.mock_shade_client, + 'volume_name_or_id') + self.assertEqual({'volume'}, output) + + def test_get_volume_None(self): + self.mock_shade_client.get_volume.return_value = None + output = openstack_utils.get_volume(self.mock_shade_client, + 'volume_name_or_id') + self.assertIsNone(output) + + +class CreateVolumeTestCase(unittest.TestCase): + + def setUp(self): + self.mock_shade_client = mock.Mock() + self.size = 1 + + def test_create_volume(self): + self.mock_shade_client.create_volume.return_value = ( + {'name': 'volume-name', 'size': self.size}) + output = openstack_utils.create_volume( + self.mock_shade_client, self.size) + self.assertEqual( + {'name': 'volume-name', 'size': self.size}, + output) + + @mock.patch.object(openstack_utils, 'log') + def test_create_volume_fail(self, mock_logger): + self.mock_shade_client.create_volume.side_effect = ( + exc.OpenStackCloudException('error message')) + output = openstack_utils.create_volume(self.mock_shade_client, + self.size) + mock_logger.error.assert_called_once() + self.assertIsNone(output) + + +class DeleteVolumeTestCase(unittest.TestCase): + + def setUp(self): + self.mock_shade_client = mock.Mock() + + def test_delete_volume(self): + self.mock_shade_client.delete_volume.return_value = True + output = openstack_utils.delete_volume(self.mock_shade_client, + 'volume_name_or_id') + self.assertTrue(output) + + def test_delete_volume_fail(self): + self.mock_shade_client.delete_volume.return_value = False + output = openstack_utils.delete_volume(self.mock_shade_client, + 'volume_name_or_id') + self.assertFalse(output) + + @mock.patch.object(openstack_utils, 'log') + def test_delete_volume_exception(self, mock_logger): + self.mock_shade_client.delete_volume.side_effect = ( + exc.OpenStackCloudException('error message')) + output = openstack_utils.delete_volume(self.mock_shade_client, + 'volume_name_or_id') + mock_logger.error.assert_called_once() + self.assertFalse(output) + + +class DetachVolumeTestCase(unittest.TestCase): + + @mock.patch.object(openstack_utils, 'get_server') + def test_detach_volume(self, mock_get_server): + self.mock_shade_client = mock.Mock() + mock_get_server.return_value = {'server_dict'} + self.mock_shade_client.get_volume.return_value = {'volume_dict'} + output = openstack_utils.detach_volume(self.mock_shade_client, + 'server_name_or_id', + 'volume_name_or_id') + self.assertTrue(output) + + @mock.patch.object(openstack_utils, 'get_server') + @mock.patch.object(openstack_utils, 'log') + def test_detach_volume_exception(self, mock_logger, mock_get_server): + self.mock_shade_client = mock.Mock() + mock_get_server.return_value = {'server_dict'} + self.mock_shade_client.get_volume.return_value = {'volume_dict'} + self.mock_shade_client.detach_volume.side_effect = ( + exc.OpenStackCloudException('error message')) + output = openstack_utils.detach_volume(self.mock_shade_client, + 'server_name_or_id', + 'volume_name_or_id') + mock_logger.error.assert_called_once() + self.assertFalse(output) diff --git a/yardstick/tests/unit/common/test_packages.py b/yardstick/tests/unit/common/test_packages.py new file mode 100644 index 000000000..ba59a3015 --- /dev/null +++ b/yardstick/tests/unit/common/test_packages.py @@ -0,0 +1,88 @@ +# Copyright (c) 2018 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +import mock +from pip import exceptions as pip_exceptions +from pip.operations import freeze +import unittest + +from yardstick.common import packages + + +class PipExecuteActionTestCase(unittest.TestCase): + + def setUp(self): + self._mock_pip_main = mock.patch.object(packages, '_pip_main') + self.mock_pip_main = self._mock_pip_main.start() + self.mock_pip_main.return_value = 0 + self._mock_freeze = mock.patch.object(freeze, 'freeze') + self.mock_freeze = self._mock_freeze.start() + self.addCleanup(self._cleanup) + + def _cleanup(self): + self._mock_pip_main.stop() + self._mock_freeze.stop() + + def test_pip_execute_action(self): + self.assertEqual(0, packages._pip_execute_action('test_package')) + + def test_remove(self): + self.assertEqual(0, packages._pip_execute_action('test_package', + action='uninstall')) + + def test_install(self): + self.assertEqual(0, packages._pip_execute_action( + 'test_package', action='install', target='temp_dir')) + + def test_pip_execute_action_error(self): + self.mock_pip_main.return_value = 1 + self.assertEqual(1, packages._pip_execute_action('test_package')) + + def test_pip_execute_action_exception(self): + self.mock_pip_main.side_effect = pip_exceptions.PipError + self.assertEqual(1, packages._pip_execute_action('test_package')) + + def test_pip_list(self): + pkg_input = [ + 'XStatic-Rickshaw==1.5.0.0', + 'xvfbwrapper==0.2.9', + '-e git+https://git.opnfv.org/yardstick@50773a24afc02c9652b662ecca' + '2fc5621ea6097a#egg=yardstick', + 'zope.interface==4.4.3' + ] + pkg_dict = { + 'XStatic-Rickshaw': '1.5.0.0', + 'xvfbwrapper': '0.2.9', + 'yardstick': '50773a24afc02c9652b662ecca2fc5621ea6097a', + 'zope.interface': '4.4.3' + } + self.mock_freeze.return_value = pkg_input + + pkg_output = packages.pip_list() + for pkg_name, pkg_version in pkg_output.items(): + self.assertEqual(pkg_dict.get(pkg_name), pkg_version) + + def test_pip_list_single_package(self): + pkg_input = [ + 'XStatic-Rickshaw==1.5.0.0', + 'xvfbwrapper==0.2.9', + '-e git+https://git.opnfv.org/yardstick@50773a24afc02c9652b662ecca' + '2fc5621ea6097a#egg=yardstick', + 'zope.interface==4.4.3' + ] + self.mock_freeze.return_value = pkg_input + + pkg_output = packages.pip_list(pkg_name='xvfbwrapper') + self.assertEqual(1, len(pkg_output)) + self.assertEqual(pkg_output.get('xvfbwrapper'), '0.2.9') diff --git a/tests/unit/network_services/collector/__init__.py b/yardstick/tests/unit/network_services/__init__.py index e69de29bb..e69de29bb 100644 --- a/tests/unit/network_services/collector/__init__.py +++ b/yardstick/tests/unit/network_services/__init__.py diff --git a/tests/unit/network_services/helpers/__init__.py b/yardstick/tests/unit/network_services/collector/__init__.py index e69de29bb..e69de29bb 100644 --- a/tests/unit/network_services/helpers/__init__.py +++ b/yardstick/tests/unit/network_services/collector/__init__.py diff --git a/tests/unit/network_services/collector/test_publisher.py b/yardstick/tests/unit/network_services/collector/test_publisher.py index 4a175841d..145441ddd 100644 --- a/tests/unit/network_services/collector/test_publisher.py +++ b/yardstick/tests/unit/network_services/collector/test_publisher.py @@ -13,9 +13,6 @@ # limitations under the License. # -# Unittest for yardstick.network_services.collector.publisher - -from __future__ import absolute_import import unittest from yardstick.network_services.collector import publisher diff --git a/tests/unit/network_services/collector/test_subscriber.py b/yardstick/tests/unit/network_services/collector/test_subscriber.py index d4b4ecf7a..14e26f7fe 100644 --- a/tests/unit/network_services/collector/test_subscriber.py +++ b/yardstick/tests/unit/network_services/collector/test_subscriber.py @@ -13,13 +13,11 @@ # limitations under the License. # -# Unittest for yardstick.network_services.collector.subscriber - -from __future__ import absolute_import import unittest import mock from yardstick.network_services.collector import subscriber +from yardstick import ssh class MockVnfAprrox(object): @@ -40,57 +38,41 @@ class MockVnfAprrox(object): class CollectorTestCase(unittest.TestCase): - NODES = { - 'node1': {}, - 'node2': { - 'ip': '1.2.3.4', - 'collectd': { - 'plugins': {'abc': 12, 'def': 34}, - 'interval': 987, - }, - }, - } - TRAFFIC_PROFILE = { - 'key1': 'value1', - } - def setUp(self): vnf = MockVnfAprrox() - self.ssh_patch = mock.patch('yardstick.network_services.nfvi.resource.ssh', autospec=True) + vnf.start_collect = mock.Mock() + vnf.stop_collect = mock.Mock() + self.ssh_patch = mock.patch.object(ssh, 'AutoConnectSSH') mock_ssh = self.ssh_patch.start() mock_instance = mock.Mock() mock_instance.execute.return_value = 0, '', '' - mock_ssh.AutoConnectSSH.from_node.return_value = mock_instance - self.collector = subscriber.Collector([vnf], self.NODES, self.TRAFFIC_PROFILE, 1800) + mock_ssh.from_node.return_value = mock_instance + self.collector = subscriber.Collector([vnf]) def tearDown(self): self.ssh_patch.stop() def test___init__(self, *_): vnf = MockVnfAprrox() - collector = subscriber.Collector([vnf], {}, {}) + collector = subscriber.Collector([vnf]) self.assertEqual(len(collector.vnfs), 1) - self.assertEqual(collector.traffic_profile, {}) - - def test___init___with_data(self, *_): - self.assertEqual(len(self.collector.vnfs), 1) - self.assertDictEqual(self.collector.traffic_profile, self.TRAFFIC_PROFILE) - self.assertEqual(len(self.collector.resource_profiles), 1) - - def test___init___negative(self, *_): - pass def test_start(self, *_): self.assertIsNone(self.collector.start()) + for vnf in self.collector.vnfs: + vnf.start_collect.assert_called_once() def test_stop(self, *_): self.assertIsNone(self.collector.stop()) + for vnf in self.collector.vnfs: + vnf.stop_collect.assert_called_once() def test_get_kpi(self, *_): result = self.collector.get_kpi() + self.assertEqual(1, len(result)) + self.assertEqual(4, len(result["vnf__1"])) self.assertEqual(result["vnf__1"]["pkt_in_up_stream"], 100) self.assertEqual(result["vnf__1"]["pkt_drop_up_stream"], 5) self.assertEqual(result["vnf__1"]["pkt_in_down_stream"], 50) self.assertEqual(result["vnf__1"]["pkt_drop_down_stream"], 40) - self.assertIn('node2', result) diff --git a/tests/unit/network_services/libs/__init__.py b/yardstick/tests/unit/network_services/helpers/__init__.py index e69de29bb..e69de29bb 100644 --- a/tests/unit/network_services/libs/__init__.py +++ b/yardstick/tests/unit/network_services/helpers/__init__.py diff --git a/tests/unit/network_services/helpers/acl_vnf_topology_ixia.yaml b/yardstick/tests/unit/network_services/helpers/acl_vnf_topology_ixia.yaml index f60834fbd..f60834fbd 100644 --- a/tests/unit/network_services/helpers/acl_vnf_topology_ixia.yaml +++ b/yardstick/tests/unit/network_services/helpers/acl_vnf_topology_ixia.yaml diff --git a/tests/unit/network_services/helpers/test_cpu.py b/yardstick/tests/unit/network_services/helpers/test_cpu.py index 1f9d3f219..871fbf8c9 100644 --- a/tests/unit/network_services/helpers/test_cpu.py +++ b/yardstick/tests/unit/network_services/helpers/test_cpu.py @@ -13,7 +13,6 @@ # limitations under the License. # -from __future__ import absolute_import from __future__ import division import unittest import mock @@ -25,15 +24,20 @@ from yardstick.network_services.helpers.cpu import \ class TestCpuSysCores(unittest.TestCase): + def setUp(self): + self._mock_ssh = mock.patch("yardstick.ssh.SSH") + self.mock_ssh = self._mock_ssh.start() + + self.addCleanup(self._cleanup) + + def _cleanup(self): + self._mock_ssh.stop() + def test___init__(self): - with mock.patch("yardstick.ssh.SSH") as ssh: - ssh_mock = mock.Mock(autospec=ssh.SSH) - ssh_mock.execute = \ - mock.Mock(return_value=(1, "", "")) - ssh_mock.put = \ - mock.Mock(return_value=(1, "", "")) - cpu_topo = CpuSysCores(ssh_mock) - self.assertIsNotNone(cpu_topo.connection) + self.mock_ssh.execute.return_value = 1, "", "" + self.mock_ssh.put.return_value = 1, "", "" + cpu_topo = CpuSysCores(self.mock_ssh) + self.assertIsNotNone(cpu_topo.connection) def test__get_core_details(self): with mock.patch("yardstick.ssh.SSH") as ssh: @@ -52,7 +56,7 @@ class TestCpuSysCores(unittest.TestCase): with mock.patch("yardstick.ssh.SSH") as ssh: ssh_mock = mock.Mock(autospec=ssh.SSH) ssh_mock.execute = \ - mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) + mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) ssh_mock.put = \ mock.Mock(return_value=(1, "", "")) cpu_topo = CpuSysCores(ssh_mock) @@ -68,7 +72,7 @@ class TestCpuSysCores(unittest.TestCase): with mock.patch("yardstick.ssh.SSH") as ssh: ssh_mock = mock.Mock(autospec=ssh.SSH) ssh_mock.execute = \ - mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) + mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) ssh_mock.put = \ mock.Mock(return_value=(1, "", "")) cpu_topo = CpuSysCores(ssh_mock) @@ -77,14 +81,14 @@ class TestCpuSysCores(unittest.TestCase): mock.Mock(side_effect=[[{'Core(s) per socket': '2', 'Thread(s) per core': '1'}], [{'physical id': '2', 'processor': '1'}]]) cpu_topo.core_map = \ - {'thread_per_core': '1', '2':['1'], 'cores_per_socket': '2'} + {'thread_per_core': '1', '2': ['1'], 'cores_per_socket': '2'} self.assertEqual(-1, cpu_topo.validate_cpu_cfg()) def test_validate_cpu_cfg_2t(self): with mock.patch("yardstick.ssh.SSH") as ssh: ssh_mock = mock.Mock(autospec=ssh.SSH) ssh_mock.execute = \ - mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) + mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) ssh_mock.put = \ mock.Mock(return_value=(1, "", "")) cpu_topo = CpuSysCores(ssh_mock) @@ -93,7 +97,7 @@ class TestCpuSysCores(unittest.TestCase): mock.Mock(side_effect=[[{'Core(s) per socket': '2', 'Thread(s) per core': '1'}], [{'physical id': '2', 'processor': '1'}]]) cpu_topo.core_map = \ - {'thread_per_core': 1, '2':['1'], 'cores_per_socket': '2'} + {'thread_per_core': 1, '2': ['1'], 'cores_per_socket': '2'} vnf_cfg = {'lb_config': 'SW', 'lb_count': 1, 'worker_config': '1C/2T', 'worker_threads': 1} self.assertEqual(-1, cpu_topo.validate_cpu_cfg(vnf_cfg)) @@ -102,7 +106,7 @@ class TestCpuSysCores(unittest.TestCase): with mock.patch("yardstick.ssh.SSH") as ssh: ssh_mock = mock.Mock(autospec=ssh.SSH) ssh_mock.execute = \ - mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) + mock.Mock(return_value=(1, "cpu:1\ntest:2\n \n", "")) ssh_mock.put = \ mock.Mock(return_value=(1, "", "")) cpu_topo = CpuSysCores(ssh_mock) @@ -111,7 +115,7 @@ class TestCpuSysCores(unittest.TestCase): mock.Mock(side_effect=[[{'Core(s) per socket': '2', 'Thread(s) per core': '1'}], [{'physical id': '2', 'processor': '1'}]]) cpu_topo.core_map = \ - {'thread_per_core': 1, '2':[1], 'cores_per_socket': 2} + {'thread_per_core': 1, '2': [1], 'cores_per_socket': 2} vnf_cfg = {'lb_config': 'SW', 'lb_count': 1, 'worker_config': '1C/1T', 'worker_threads': 1} self.assertEqual(-1, cpu_topo.validate_cpu_cfg(vnf_cfg)) diff --git a/tests/unit/network_services/helpers/test_dpdkbindnic_helper.py b/yardstick/tests/unit/network_services/helpers/test_dpdkbindnic_helper.py index 367072e84..367072e84 100644 --- a/tests/unit/network_services/helpers/test_dpdkbindnic_helper.py +++ b/yardstick/tests/unit/network_services/helpers/test_dpdkbindnic_helper.py diff --git a/tests/unit/network_services/helpers/test_iniparser.py b/yardstick/tests/unit/network_services/helpers/test_iniparser.py index bd27b497e..1a09f0761 100644 --- a/tests/unit/network_services/helpers/test_iniparser.py +++ b/yardstick/tests/unit/network_services/helpers/test_iniparser.py @@ -13,13 +13,11 @@ # limitations under the License. # -from __future__ import absolute_import - import unittest from contextlib import contextmanager import mock -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() @@ -105,7 +103,7 @@ class TestBaseParser(unittest.TestCase): @staticmethod def make_open(text_blob): @contextmanager - def internal_open(*args, **kwargs): + def internal_open(*args): yield text_blob.split('\n') return internal_open @@ -136,7 +134,7 @@ class TestConfigParser(unittest.TestCase): @staticmethod def make_open(text_blob): @contextmanager - def internal_open(*args, **kwargs): + def internal_open(*args): yield text_blob.split('\n') return internal_open diff --git a/tests/unit/network_services/helpers/test_samplevnf_helper.py b/yardstick/tests/unit/network_services/helpers/test_samplevnf_helper.py index dc74b1859..6d5e1da60 100644 --- a/tests/unit/network_services/helpers/test_samplevnf_helper.py +++ b/yardstick/tests/unit/network_services/helpers/test_samplevnf_helper.py @@ -756,7 +756,6 @@ class TestMultiPortConfig(unittest.TestCase): self.assertIsNone(result) def test_generate_arp_route_tbl(self): - # ELF: could n=do this in setup topology_file = mock.Mock() config_tpl = mock.Mock() tmp_file = "" diff --git a/tests/unit/network_services/libs/ixia_libs/__init__.py b/yardstick/tests/unit/network_services/libs/__init__.py index e69de29bb..e69de29bb 100644 --- a/tests/unit/network_services/libs/ixia_libs/__init__.py +++ b/yardstick/tests/unit/network_services/libs/__init__.py diff --git a/tests/unit/network_services/nfvi/__init__.py b/yardstick/tests/unit/network_services/libs/ixia_libs/__init__.py index e69de29bb..e69de29bb 100644 --- a/tests/unit/network_services/nfvi/__init__.py +++ b/yardstick/tests/unit/network_services/libs/ixia_libs/__init__.py diff --git a/tests/unit/network_services/libs/ixia_libs/test_IxNet.py b/yardstick/tests/unit/network_services/libs/ixia_libs/test_IxNet.py index 2a97048aa..7ca2f0f19 100644 --- a/tests/unit/network_services/libs/ixia_libs/test_IxNet.py +++ b/yardstick/tests/unit/network_services/libs/ixia_libs/test_IxNet.py @@ -13,34 +13,38 @@ # limitations under the License. # -# Unittest for yardstick.network_services.libs.ixia_libs.IxNet - -from __future__ import absolute_import -import unittest import mock +import IxNetwork +import unittest from yardstick.network_services.libs.ixia_libs.IxNet.IxNet import IxNextgen from yardstick.network_services.libs.ixia_libs.IxNet.IxNet import IP_VERSION_4 from yardstick.network_services.libs.ixia_libs.IxNet.IxNet import IP_VERSION_6 - UPLINK = "uplink" DOWNLINK = "downlink" + class TestIxNextgen(unittest.TestCase): def test___init__(self): ixnet_gen = IxNextgen() self.assertIsNone(ixnet_gen._bidir) - @mock.patch("yardstick.network_services.libs.ixia_libs.IxNet.IxNet.sys") - def test_connect(self, *args): - + @mock.patch.object(IxNetwork, 'IxNet') + def test_connect(self, mock_ixnet): + ixnet_instance = mock.Mock() + mock_ixnet.return_value = ixnet_instance ixnet_gen = IxNextgen() - ixnet_gen.get_config = mock.MagicMock() - ixnet_gen.get_ixnet = mock.MagicMock() + with mock.patch.object(ixnet_gen, 'get_config') as mock_config: + mock_config.return_value = {'machine': 'machine_fake', + 'port': 'port_fake', + 'version': 12345} + ixnet_gen._connect(mock.ANY) - self.assertRaises(ImportError, ixnet_gen._connect, {"py_lib_path": "/tmp"}) + ixnet_instance.connect.assert_called_once_with( + 'machine_fake', '-port', 'port_fake', '-version', '12345') + mock_config.assert_called_once() def test_clear_ixia_config(self): ixnet = mock.MagicMock() @@ -628,11 +632,9 @@ class TestIxNextgen(unittest.TestCase): def test_set_random_ip_multi_attributes_bad_ip_version(self): bad_ip_version = object() ixnet_gen = IxNextgen(mock.Mock()) - mock1 = mock.Mock() - mock2 = mock.Mock() - mock3 = mock.Mock() with self.assertRaises(ValueError): - ixnet_gen.set_random_ip_multi_attributes(mock1, bad_ip_version, mock2, mock3) + ixnet_gen.set_random_ip_multi_attributes( + mock.Mock(), bad_ip_version, mock.Mock(), mock.Mock()) def test_get_config(self): tg_cfg = { @@ -659,13 +661,11 @@ class TestIxNextgen(unittest.TestCase): "version": "test3", "ixchassis": "test4", "tcl_port": "test5", - "py_lib_path": "test6", }, } } expected = { - 'py_lib_path': 'test6', 'machine': 'test1', 'port': 'test5', 'chassis': 'test4', diff --git a/tests/unit/network_services/traffic_profile/__init__.py b/yardstick/tests/unit/network_services/nfvi/__init__.py index e69de29bb..e69de29bb 100644 --- a/tests/unit/network_services/traffic_profile/__init__.py +++ b/yardstick/tests/unit/network_services/nfvi/__init__.py diff --git a/tests/unit/network_services/nfvi/test_collectd.py b/yardstick/tests/unit/network_services/nfvi/test_collectd.py index 0ae175624..fe59aecfb 100644 --- a/tests/unit/network_services/nfvi/test_collectd.py +++ b/yardstick/tests/unit/network_services/nfvi/test_collectd.py @@ -12,7 +12,6 @@ # See the License for the specific language governing permissions and # limitations under the License. -from __future__ import absolute_import import unittest import multiprocessing import mock diff --git a/tests/unit/network_services/nfvi/test_resource.py b/yardstick/tests/unit/network_services/nfvi/test_resource.py index f5f7f0fe7..9f337c673 100644 --- a/tests/unit/network_services/nfvi/test_resource.py +++ b/yardstick/tests/unit/network_services/nfvi/test_resource.py @@ -19,7 +19,8 @@ import unittest from yardstick.network_services.nfvi.resource import ResourceProfile from yardstick.network_services.nfvi import resource, collectd - +from yardstick.common.exceptions import ResourceCommandError +from yardstick import ssh class TestResourceProfile(unittest.TestCase): VNFD = {'vnfd:vnfd-catalog': @@ -128,8 +129,31 @@ class TestResourceProfile(unittest.TestCase): self.assertEqual(val, ('error', 'Invalid', '', '')) def test__start_collectd(self): - self.assertIsNone( - self.resource_profile._start_collectd(self.ssh_mock, "/opt/nsb_bin")) + ssh_mock = mock.Mock() + ssh_mock.execute = mock.Mock(return_value=(0, "", "")) + self.assertIsNone(self.resource_profile._start_collectd(ssh_mock, + "/opt/nsb_bin")) + + ssh_mock.execute = mock.Mock(side_effect=ssh.SSHError) + with self.assertRaises(ssh.SSHError): + self.resource_profile._start_collectd(ssh_mock, "/opt/nsb_bin") + + ssh_mock.execute = mock.Mock(return_value=(1, "", "")) + self.assertIsNone(self.resource_profile._start_collectd(ssh_mock, + "/opt/nsb_bin")) + + def test__start_rabbitmq(self): + ssh_mock = mock.Mock() + ssh_mock.execute = mock.Mock(return_value=(0, "RabbitMQ", "")) + self.assertIsNone(self.resource_profile._start_rabbitmq(ssh_mock)) + + ssh_mock.execute = mock.Mock(return_value=(0, "", "")) + with self.assertRaises(ResourceCommandError): + self.resource_profile._start_rabbitmq(ssh_mock) + + ssh_mock.execute = mock.Mock(return_value=(1, "", "")) + with self.assertRaises(ResourceCommandError): + self.resource_profile._start_rabbitmq(ssh_mock) def test__prepare_collectd_conf(self): self.assertIsNone( @@ -154,11 +178,12 @@ class TestResourceProfile(unittest.TestCase): def test_initiate_systemagent(self): self.resource_profile._start_collectd = mock.Mock() + self.resource_profile._start_rabbitmq = mock.Mock() self.assertIsNone( self.resource_profile.initiate_systemagent("/opt/nsb_bin")) def test_initiate_systemagent_raise(self): - self.resource_profile._start_collectd = mock.Mock(side_effect=RuntimeError) + self.resource_profile._start_rabbitmq = mock.Mock(side_effect=RuntimeError) with self.assertRaises(RuntimeError): self.resource_profile.initiate_systemagent("/opt/nsb_bin") diff --git a/tests/unit/network_services/test_utils.py b/yardstick/tests/unit/network_services/test_utils.py index bf98a4474..2b2eb7109 100644 --- a/tests/unit/network_services/test_utils.py +++ b/yardstick/tests/unit/network_services/test_utils.py @@ -13,8 +13,6 @@ # limitations under the License. # -# Unittest for yardstick.network_services.utils - import os import unittest import mock diff --git a/tests/unit/network_services/test_yang_model.py b/yardstick/tests/unit/network_services/test_yang_model.py index 0b29da701..a7eb36b8a 100644 --- a/tests/unit/network_services/test_yang_model.py +++ b/yardstick/tests/unit/network_services/test_yang_model.py @@ -13,14 +13,8 @@ # limitations under the License. # -# Unittest for yardstick.network_services.utils - -from __future__ import absolute_import - -import unittest import mock - -import yaml +import unittest from yardstick.network_services.yang_model import YangModel @@ -95,9 +89,9 @@ class YangModelTestCase(unittest.TestCase): y._get_entries() self.assertEqual(y._rules, '') - @mock.patch('yardstick.network_services.yang_model.yaml_load') @mock.patch('yardstick.network_services.yang_model.open') - def test__read_config(self, mock_open, mock_safe_load): + @mock.patch('yardstick.network_services.yang_model.yaml_load') + def test__read_config(self, mock_safe_load, *args): cfg = "yang.yaml" y = YangModel(cfg) mock_safe_load.return_value = expected = {'key1': 'value1', 'key2': 'value2'} diff --git a/yardstick/tests/unit/network_services/traffic_profile/__init__.py b/yardstick/tests/unit/network_services/traffic_profile/__init__.py new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/yardstick/tests/unit/network_services/traffic_profile/__init__.py diff --git a/tests/unit/network_services/traffic_profile/test_base.py b/yardstick/tests/unit/network_services/traffic_profile/test_base.py index 3b8804976..3b8804976 100644 --- a/tests/unit/network_services/traffic_profile/test_base.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_base.py diff --git a/tests/unit/network_services/traffic_profile/test_fixed.py b/yardstick/tests/unit/network_services/traffic_profile/test_fixed.py index dec94964b..39905e6b1 100644 --- a/tests/unit/network_services/traffic_profile/test_fixed.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_fixed.py @@ -13,12 +13,10 @@ # limitations under the License. # -from __future__ import absolute_import - -import unittest import mock +import unittest -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() stl_patch = mock.patch.dict("sys.modules", STL_MOCKS) diff --git a/tests/unit/network_services/traffic_profile/test_http.py b/yardstick/tests/unit/network_services/traffic_profile/test_http.py index 5d8029ea0..0d1b916a7 100644 --- a/tests/unit/network_services/traffic_profile/test_http.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_http.py @@ -13,7 +13,6 @@ # limitations under the License. # -from __future__ import absolute_import import unittest from yardstick.network_services.traffic_profile.base import TrafficProfile @@ -29,7 +28,7 @@ class TestTrafficProfileGenericHTTP(unittest.TestCase): def test_execute(self): traffic_profile_generic_htt_p = \ - TrafficProfileGenericHTTP(TrafficProfile) + TrafficProfileGenericHTTP(TrafficProfile) traffic_generator = {} self.assertIsNone( traffic_profile_generic_htt_p.execute(traffic_generator)) diff --git a/tests/unit/network_services/traffic_profile/test_http_ixload.py b/yardstick/tests/unit/network_services/traffic_profile/test_http_ixload.py index 5110439fd..57de6602d 100644 --- a/tests/unit/network_services/traffic_profile/test_http_ixload.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_http_ixload.py @@ -12,8 +12,6 @@ # See the License for the specific language governing permissions and # limitations under the License. - -from __future__ import absolute_import import unittest import mock @@ -187,9 +185,9 @@ class TestIxLoadTrafficGen(unittest.TestCase): with self.assertRaises(Exception): ixload.load_config_file("ixload.cfg") - @mock.patch('yardstick.network_services.traffic_profile.http_ixload.IxLoad') @mock.patch('yardstick.network_services.traffic_profile.http_ixload.StatCollectorUtils') - def test_start_http_test_connect_error(self, mock_collector_type, mock_ixload_type): + @mock.patch('yardstick.network_services.traffic_profile.http_ixload.IxLoad') + def test_start_http_test_connect_error(self, mock_ixload_type, *args): ports = [1, 2, 3] test_input = { "remote_server": "REMOTE_SERVER", @@ -204,8 +202,7 @@ class TestIxLoadTrafficGen(unittest.TestCase): j = jsonutils.dump_as_bytes(test_input) - mock_ixload = mock_ixload_type() - mock_ixload.connect.side_effect = RuntimeError + mock_ixload_type.return_value.connect.side_effect = RuntimeError ixload = http_ixload.IXLOADHttpTest(j) ixload.results_on_windows = 'windows_result_dir' @@ -216,7 +213,7 @@ class TestIxLoadTrafficGen(unittest.TestCase): @mock.patch('yardstick.network_services.traffic_profile.http_ixload.IxLoad') @mock.patch('yardstick.network_services.traffic_profile.http_ixload.StatCollectorUtils') - def test_start_http_test(self, mock_collector_type, mock_ixload_type): + def test_start_http_test(self, *args): ports = [1, 2, 3] test_input = { "remote_server": "REMOTE_SERVER", @@ -240,7 +237,7 @@ class TestIxLoadTrafficGen(unittest.TestCase): @mock.patch('yardstick.network_services.traffic_profile.http_ixload.IxLoad') @mock.patch('yardstick.network_services.traffic_profile.http_ixload.StatCollectorUtils') - def test_start_http_test_reassign_error(self, mock_collector_type, mock_ixload_type): + def test_start_http_test_reassign_error(self, *args): ports = [1, 2, 3] test_input = { "remote_server": "REMOTE_SERVER", @@ -264,9 +261,9 @@ class TestIxLoadTrafficGen(unittest.TestCase): ixload.result_dir = 'my_result_dir' ixload.start_http_test() - self.assertEqual(reassign_ports.call_count, 1) + reassign_ports.assert_called_once() @mock.patch("yardstick.network_services.traffic_profile.http_ixload.IXLOADHttpTest") - def test_main(self, IXLOADHttpTest): + def test_main(self, *args): args = ["1", "2", "3"] http_ixload.main(args) diff --git a/tests/unit/network_services/traffic_profile/test_ixia_rfc2544.py b/yardstick/tests/unit/network_services/traffic_profile/test_ixia_rfc2544.py index e8910d62b..a0abe2bbd 100644 --- a/tests/unit/network_services/traffic_profile/test_ixia_rfc2544.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_ixia_rfc2544.py @@ -13,14 +13,12 @@ # limitations under the License. # -from __future__ import absolute_import -from __future__ import division import unittest import mock from copy import deepcopy -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() stl_patch = mock.patch.dict("sys.modules", STL_MOCKS) @@ -48,35 +46,55 @@ class TestIXIARFC2544Profile(unittest.TestCase): }, } - PROFILE = {'description': 'Traffic profile to run RFC2544 latency', - 'name': 'rfc2544', - 'traffic_profile': {'traffic_type': 'IXIARFC2544Profile', - 'frame_rate': 100}, - IXIARFC2544Profile.DOWNLINK: {'ipv4': - {'outer_l2': {'framesize': - {'64B': '100', '1518B': '0', - '128B': '0', '1400B': '0', - '256B': '0', '373b': '0', - '570B': '0'}}, - 'outer_l3v4': {'dstip4': '1.1.1.1-1.15.255.255', - 'proto': 'udp', 'count': '1', - 'srcip4': '90.90.1.1-90.105.255.255', - 'dscp': 0, 'ttl': 32}, - 'outer_l4': {'srcport': '2001', - 'dsrport': '1234'}}}, - IXIARFC2544Profile.UPLINK: {'ipv4': - {'outer_l2': {'framesize': - {'64B': '100', '1518B': '0', - '128B': '0', '1400B': '0', - '256B': '0', '373b': '0', - '570B': '0'}}, - 'outer_l3v4': {'dstip4': '9.9.1.1-90.105.255.255', - 'proto': 'udp', 'count': '1', - 'srcip4': '1.1.1.1-1.15.255.255', - 'dscp': 0, 'ttl': 32}, - 'outer_l4': {'dstport': '2001', - 'srcport': '1234'}}}, - 'schema': 'isb:traffic_profile:0.1'} + PROFILE = { + 'description': 'Traffic profile to run RFC2544 latency', + 'name': 'rfc2544', + 'traffic_profile': { + 'traffic_type': 'IXIARFC2544Profile', + 'frame_rate': 100}, + IXIARFC2544Profile.DOWNLINK: { + 'ipv4': { + 'outer_l2': { + 'framesize': { + '64B': '100', + '1518B': '0', + '128B': '0', + '1400B': '0', + '256B': '0', + '373b': '0', + '570B': '0'}}, + 'outer_l3v4': { + 'dstip4': '1.1.1.1-1.15.255.255', + 'proto': 'udp', + 'count': '1', + 'srcip4': '90.90.1.1-90.105.255.255', + 'dscp': 0, + 'ttl': 32}, + 'outer_l4': { + 'srcport': '2001', + 'dsrport': '1234'}}}, + IXIARFC2544Profile.UPLINK: { + 'ipv4': { + 'outer_l2': { + 'framesize': { + '64B': '100', + '1518B': '0', + '128B': '0', + '1400B': '0', + '256B': '0', + '373b': '0', + '570B': '0'}}, + 'outer_l3v4': { + 'dstip4': '9.9.1.1-90.105.255.255', + 'proto': 'udp', + 'count': '1', + 'srcip4': '1.1.1.1-1.15.255.255', + 'dscp': 0, + 'ttl': 32}, + 'outer_l4': { + 'dstport': '2001', + 'srcport': '1234'}}}, + 'schema': 'isb:traffic_profile:0.1'} def test_get_ixia_traffic_profile_error(self): traffic_generator = mock.Mock(autospec=TrexProfile) @@ -215,7 +233,6 @@ class TestIXIARFC2544Profile(unittest.TestCase): "count": "1" }, "outer_l3v6": { - "count": 1024, "dscp": 0, "dstip4": "152.16.100.20", "proto": "udp", @@ -249,7 +266,6 @@ class TestIXIARFC2544Profile(unittest.TestCase): "ttl": 32 }, "outer_l3v4": { - "count": 1024, "dscp": 0, "dstip4": "152.16.100.20", "proto": "udp", @@ -257,7 +273,6 @@ class TestIXIARFC2544Profile(unittest.TestCase): "ttl": 32, }, "outer_l3v6": { - "count": 1024, "dscp": 0, "dstip4": "152.16.100.20", "proto": "udp", @@ -408,24 +423,24 @@ class TestIXIARFC2544Profile(unittest.TestCase): 'outer_l4': {'srcport': '2001', 'dsrport': '1234'}}}, IXIARFC2544Profile.UPLINK: {'ipv4': - {'outer_l2': {'framesize': - {'64B': '100', '1518B': '0', - '128B': '0', '1400B': '0', - '256B': '0', '373b': '0', - '570B': '0'}}, - 'outer_l3v4': - {'dstip4': '9.9.1.1-90.105.255.255', - 'proto': 'udp', 'count': '1', - 'srcip4': '1.1.1.1-1.15.255.255', - 'dscp': 0, 'ttl': 32}, - 'outer_l3v6': - {'dstip6': '9.9.1.1-90.105.255.255', - 'proto': 'udp', 'count': '1', - 'srcip6': '1.1.1.1-1.15.255.255', - 'dscp': 0, 'ttl': 32}, + {'outer_l2': {'framesize': + {'64B': '100', '1518B': '0', + '128B': '0', '1400B': '0', + '256B': '0', '373b': '0', + '570B': '0'}}, + 'outer_l3v4': + {'dstip4': '9.9.1.1-90.105.255.255', + 'proto': 'udp', 'count': '1', + 'srcip4': '1.1.1.1-1.15.255.255', + 'dscp': 0, 'ttl': 32}, + 'outer_l3v6': + {'dstip6': '9.9.1.1-90.105.255.255', + 'proto': 'udp', 'count': '1', + 'srcip6': '1.1.1.1-1.15.255.255', + 'dscp': 0, 'ttl': 32}, - 'outer_l4': {'dstport': '2001', - 'srcport': '1234'}}}, + 'outer_l4': {'dstport': '2001', + 'srcport': '1234'}}}, 'schema': 'isb:traffic_profile:0.1'} result = r_f_c2544_profile._get_ixia_traffic_profile(profile_data, mac) self.assertIsNotNone(result) @@ -497,7 +512,8 @@ class TestIXIARFC2544Profile(unittest.TestCase): r_f_c2544_profile.full_profile = {} r_f_c2544_profile.get_streams = mock.Mock() - self.assertIsNone(r_f_c2544_profile.update_traffic_profile(traffic_generator)) + self.assertIsNone( + r_f_c2544_profile.update_traffic_profile(traffic_generator)) self.assertEqual(r_f_c2544_profile.ports, ports_expected) def test_get_drop_percentage(self): diff --git a/tests/unit/network_services/traffic_profile/test_prox_acl.py b/yardstick/tests/unit/network_services/traffic_profile/test_prox_acl.py index ef5bac0d5..48c449b20 100644 --- a/tests/unit/network_services/traffic_profile/test_prox_acl.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_prox_acl.py @@ -13,12 +13,10 @@ # limitations under the License. # -from __future__ import absolute_import - import unittest import mock -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() stl_patch = mock.patch.dict("sys.modules", STL_MOCKS) @@ -32,7 +30,7 @@ if stl_patch: class TestProxACLProfile(unittest.TestCase): def test_run_test_with_pkt_size(self): - def target(*args, **kwargs): + def target(*args): runs.append(args[2]) if args[2] < 0 or args[2] > 100: raise RuntimeError(' '.join([str(args), str(runs)])) @@ -40,13 +38,8 @@ class TestProxACLProfile(unittest.TestCase): return fail_tuple, {} return success_tuple, {} - def get_mock_samples(*args, **kwargs): - if args[2] < 0: - raise RuntimeError(' '.join([str(args), str(runs)])) - return success_tuple - tp_config = { - 'traffic_profile': { + 'traffic_profile': { 'upper_bound': 100.0, 'lower_bound': 0.0, 'tolerated_loss': 50.0, @@ -55,8 +48,10 @@ class TestProxACLProfile(unittest.TestCase): } runs = [] - success_tuple = ProxTestDataTuple(10.0, 1, 2, 3, 4, [5.1, 5.2, 5.3], 995, 1000, 123.4) - fail_tuple = ProxTestDataTuple(10.0, 1, 2, 3, 4, [5.6, 5.7, 5.8], 850, 1000, 123.4) + success_tuple = ProxTestDataTuple( + 10.0, 1, 2, 3, 4, [5.1, 5.2, 5.3], 995, 1000, 123.4) + fail_tuple = ProxTestDataTuple( + 10.0, 1, 2, 3, 4, [5.6, 5.7, 5.8], 850, 1000, 123.4) traffic_gen = mock.MagicMock() @@ -75,4 +70,5 @@ class TestProxACLProfile(unittest.TestCase): profile.tolerated_loss = 100.0 profile._profile_helper = profile_helper - profile.run_test_with_pkt_size(traffic_gen, profile.pkt_size, profile.duration) + profile.run_test_with_pkt_size( + traffic_gen, profile.pkt_size, profile.duration) diff --git a/tests/unit/network_services/traffic_profile/test_prox_binsearch.py b/yardstick/tests/unit/network_services/traffic_profile/test_prox_binsearch.py index 1b4189b48..58343ffb2 100644 --- a/tests/unit/network_services/traffic_profile/test_prox_binsearch.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_prox_binsearch.py @@ -13,12 +13,10 @@ # limitations under the License. # -from __future__ import absolute_import - import unittest import mock -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() stl_patch = mock.patch.dict("sys.modules", STL_MOCKS) @@ -68,7 +66,7 @@ class TestProxBinSearchProfile(unittest.TestCase): # Result Samples inc theor_max result_tuple = {"Result_Actual_throughput": 7.5e-07, - "Result_theor_max_throughput": 0.00012340000000000002, + "Result_theor_max_throughput": 1.234e-10, "Result_pktSize": 200} profile.queue.put.assert_called_with(result_tuple) diff --git a/tests/unit/network_services/traffic_profile/test_prox_profile.py b/yardstick/tests/unit/network_services/traffic_profile/test_prox_profile.py index e5b36096f..e466305ea 100644 --- a/tests/unit/network_services/traffic_profile/test_prox_profile.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_prox_profile.py @@ -13,12 +13,10 @@ # limitations under the License. # -from __future__ import absolute_import - import unittest import mock -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() stl_patch = mock.patch.dict("sys.modules", STL_MOCKS) diff --git a/tests/unit/network_services/traffic_profile/test_prox_ramp.py b/yardstick/tests/unit/network_services/traffic_profile/test_prox_ramp.py index 1acec2f68..7a77e3295 100644 --- a/tests/unit/network_services/traffic_profile/test_prox_ramp.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_prox_ramp.py @@ -13,12 +13,10 @@ # limitations under the License. # -from __future__ import absolute_import - import unittest import mock -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() stl_patch = mock.patch.dict("sys.modules", STL_MOCKS) diff --git a/tests/unit/network_services/traffic_profile/test_rfc2544.py b/yardstick/tests/unit/network_services/traffic_profile/test_rfc2544.py index cb3a547ee..2684e0ba1 100644 --- a/tests/unit/network_services/traffic_profile/test_rfc2544.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_rfc2544.py @@ -16,7 +16,7 @@ import unittest import mock -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS STLClient = mock.MagicMock() @@ -191,7 +191,8 @@ class TestRFC2544Profile(unittest.TestCase): mock.Mock(return_value=True) r_f_c2544_profile = RFC2544Profile(self.TRAFFIC_PROFILE) r_f_c2544_profile.params = self.PROFILE - self.assertIsNone(r_f_c2544_profile.execute_traffic(traffic_generator)) + self.assertIsNone( + r_f_c2544_profile.execute_traffic(traffic_generator)) samples = {} for ifname in range(1): name = "xe{}".format(ifname) diff --git a/tests/unit/network_services/traffic_profile/test_trex_traffic_profile.py b/yardstick/tests/unit/network_services/traffic_profile/test_trex_traffic_profile.py index d1009a5e8..5fe1b7326 100644 --- a/tests/unit/network_services/traffic_profile/test_trex_traffic_profile.py +++ b/yardstick/tests/unit/network_services/traffic_profile/test_trex_traffic_profile.py @@ -18,7 +18,7 @@ import mock import six import unittest -from tests.unit import STL_MOCKS +from yardstick.tests import STL_MOCKS from yardstick.common import exceptions as y_exc STLClient = mock.MagicMock() diff --git a/yardstick/tests/unit/orchestrator/test_heat.py b/yardstick/tests/unit/orchestrator/test_heat.py index 9598eeb04..3ec59a3c2 100644 --- a/yardstick/tests/unit/orchestrator/test_heat.py +++ b/yardstick/tests/unit/orchestrator/test_heat.py @@ -17,6 +17,7 @@ import shade import unittest from yardstick.benchmark.contexts import node +from yardstick.common import constants from yardstick.common import exceptions from yardstick.orchestrator import heat @@ -53,6 +54,14 @@ class HeatStackTestCase(unittest.TestCase): self._mock_stack_get.stop() heat._DEPLOYED_STACKS = {} + @mock.patch.object(shade, 'openstack_cloud') + def test__init(self, mock_openstack_cloud): + os_cloud_config = {'key': 'value'} + heatstack = heat.HeatStack('name', os_cloud_config=os_cloud_config) + self.assertEqual('name', heatstack.name) + os_cloud_config.update(constants.OS_CLOUD_DEFAULT_CONFIG) + mock_openstack_cloud.assert_called_once_with(**os_cloud_config) + def test_create(self): template = {'tkey': 'tval'} heat_parameters = {'pkey': 'pval'} @@ -192,7 +201,9 @@ class HeatStackTestCase(unittest.TestCase): class HeatTemplateTestCase(unittest.TestCase): def setUp(self): - self.template = heat.HeatTemplate('test') + self._os_cloud_config = {'key1': 'value1'} + self.template = heat.HeatTemplate( + 'test', os_cloud_config=self._os_cloud_config) def test_add_tenant_network(self): self.template.add_network('some-network') @@ -337,8 +348,12 @@ class HeatTemplateTestCase(unittest.TestCase): def test_create_not_block(self): heat_stack = mock.Mock() - with mock.patch.object(heat, 'HeatStack', return_value=heat_stack): + with mock.patch.object(heat, 'HeatStack', return_value=heat_stack) \ + as mock_heatstack: ret = self.template.create(block=False) + + mock_heatstack.assert_called_once_with( + self.template.name, os_cloud_config=self.template._os_cloud_config) heat_stack.create.assert_called_once_with( self.template._template, self.template.heat_parameters, False, 3600) |
