Refine release note & Update scenario test resultscolorado.1.0

JIRA: YARDSTICK-351
JIRA: YARDSTICK-354

Also fix a error in Yardstick_task_templates.rst

Change-Id: Id9d091fce3afa7b0f62a08dfd6bca504aeaac805
Signed-off-by: JingLu5 <lvjing5@huawei.com>
(cherry picked from commit 090d493c2247ee63c9f9509191b011d2ecfa921f)

18 files changed, 363 insertions, 1128 deletions

diff --git a/docs/release/release-notes.rst b/docs/release/release-notes.rst
index f1b8a8de1..2494e42da 100644
--- a/docs/release/release-notes.rst
+++ b/docs/release/release-notes.rst
@@ -1,12 +1,19 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Ericsson AB and others.
+=======
+License
+=======
 
+OPNFV Colorado release note for Yardstick Docs
+are licensed under a Creative Commons Attribution 4.0 International License.
+You should have received a copy of the license along with this.
+If not, see <http://creativecommons.org/licenses/by/4.0/>.
 
-============================================
+The *Yardstick framework*, the *Yardstick test cases* and the *ApexLake*
+experimental framework are opensource software, licensed under the terms of the
+Apache License, Version 2.0.
+
+=========================================
 OPNFV Colorado Release Note for Yardstick
-============================================
+=========================================
 
 .. toctree::
    :maxdepth: 2
@@ -24,19 +31,6 @@ Abstract
 This document describes the release note of Yardstick project.
 
 
-License
-=======
-
-OPNFV Colorado release note for Yardstick Docs
-are licensed under a Creative Commons Attribution 4.0 International License.
-You should have received a copy of the license along with this.
-If not, see <http://creativecommons.org/licenses/by/4.0/>.
-
-The *Yardstick framework*, the *Yardstick test cases* and the *ApexLake*
-experimental framework are opensource software, licensed under the terms of the
-Apache License, Version 2.0.
-
-
 Version History
 ===============
 
@@ -61,8 +55,8 @@ The *Yardstick* framework is *installer*, *infrastructure* and *application*
 independent.
 
 
-Summary
-=======
+OPNFV Colorado Release
+======================
 
 This Colorado release provides *Yardstick* as a framework for NFVI testing
 and OPNFV feature testing, automated in the OPNFV CI pipeline, including:
@@ -155,6 +149,14 @@ Release Data
 Deliverables
 ============
 
+Documents
+---------
+
+ - User Guide: http://artifacts.opnfv.org/yardstick/colorado/docs/userguide/index.html
+
+ - Test Results: http://artifacts.opnfv.org/yardstick/colorado/docs/results/overview.html
+
+
 Software Deliverables
 ---------------------
 
@@ -463,6 +465,8 @@ Module Version Changes
 This is the third tracked release of Yardstick. It is based on following
 upstream versions:
 
+- ONOS Goldeneye
+
 - OpenStack Mitaka
 
 - OpenDaylight Beryllium
@@ -485,24 +489,90 @@ Project's Test Results in InfluxDB chapter; Refine yardstick instantion chapter.
 verified scenarios and limitations
 
 
-Reason for Version
-==================
-* TODO *
-
 Feature additions
 -----------------
-* TODO *
+ - Yardstick plugin
+
+
+Scenario Matrix
+===============
+
+For Colorado 1.0, Yardstick was tested on the following scenarios:
+
++-------------------------+---------+---------+---------+---------+
+|         Scenario        |  Apex   | Compass |  Fuel   |   Joid  |
++=========================+=========+=========+=========+=========+
+| os-nosdn-nofeature-noha |         |         |         |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-nofeature-ha   |    X    |         |    X    |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-nofeature-ha  |    X    |    X    |    X    |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-nofeature-noha|         |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l3-nofeature-ha  |    X    |         |    X    |         |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l3-nofeature-ha  |         |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-onos-sfc-ha          |    X    |         |    X    |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-onos-nofeature-ha    |    X    |         |    X    |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-onos-nofeature-noha  |         |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-sfc-ha        |         |         |    X    |         |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-sfc-noha      |    X    |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-bgpvpn-ha     |    X    |         |    X    |         |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-bgpvpn-noha   |         |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-kvm-ha         |         |         |    X    |         |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-kvm-noha       |         |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-ovs-ha         |         |         |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-ovs-noha       |    X    |    X    |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-ocl-nofeature-ha     |         |         |         |         |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-lxd-ha         |         |         |         |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-nosdn-lxd-noha       |         |         |         |    X    |
++-------------------------+---------+---------+---------+---------+
+| os-odl_l2-fdio-noha     |    X    |         |         |         |
++-------------------------+---------+---------+---------+---------+
+
+
+Test results
+============
+
+Test results are available in:
+
+ - jenkins logs on CI: https://build.opnfv.org/ci/view/yardstick/
+
+The reporting pages can be found at:
+
+ * apex: http://testresults.opnfv.org/reporting/yardstick/release/colorado/index-status-apex.html
+ * compass: http://testresults.opnfv.org/reporting/yardstick/release/colorado/index-status-compass.html
+ * fuel: http://testresults.opnfv.org/reporting/yardstick/release/colorado/index-status-fuel.html
+ * joid: http://testresults.opnfv.org/reporting/yardstick/release/colorado/index-status-joid.html
+
+You can get additional details through test logs on http://artifacts.opnfv.org/.
+As no search engine is available on the OPNFV artifact web site you must
+retrieve the pod identifier on which the tests have been executed (see
+field pod in any of the results) then click on the selected POD and look
+for the date of the test you are interested in.
 
-Corrected Faults
-----------------
-* TODO *
 
 Known Issues/Faults
 ------------
- - IPv6 support
  - Boot up VM failed in joid-os-nosdn-lxd-ha and joid-os-nosdn-lxd-noha scenarios
  - Yardstick CI job timeout in fuel-os-onos-nofeature-ha scenario
- - SSH timeout in apex-os-onos-sfc-ha, apex-os-onos-nofeature-ha and apex-os-odl_l3-nofeature-ha scenarios
+ - SSH timeout in apex-os-onos-sfc-ha, apex-os-onos-nofeature-ha scenarios
+ - Floating IP not supported in apex-os-odl_l3-nofeature-ha scenario
  - Scp /home/stack/overcloudrc failed in apex-os-nosdn-ovs-noha and apex-os-odl_l2-sfc-noha scenarios
 
 .. note:: The faults not related to *Yardstick* framework, addressing scenarios
@@ -510,23 +580,30 @@ Known Issues/Faults
   notes.
 
 
+Corrected Faults
+----------------
+* TODO *
+
+
 Colorado known restrictions/issues
 ==================================
 +-----------+-----------+----------------------------------------------+
 | Installer | Scenario  |  Issue                                       |
 +===========+===========+==============================================+
-| any       | *-bgpvpn  | floating ips not supported. Some Test cases  |
+| any       | *-bgpvpn  | Floating ips not supported. Some Test cases  |
 |           |           | related to floating ips are excluded.        |
 +-----------+-----------+----------------------------------------------+
-* TODO *
-
-
-Test results
-============
-
-Test results are available in:
-
- - jenkins logs on CI: https://build.opnfv.org/ci/view/yardstick/
+| any       | odl_l3-*  | Some test cases related to using floating IP |
+|           |           | addresses fail because of a known ODL bug.   |
+|           |           | https://jira.opnfv.org/browse/APEX-112       |
++-----------+-----------+----------------------------------------------+
+| apex      | *-fdio    | Due to late integration, fdio scenarios'     |
+|           |           | test suite file is not provided.             |
++-----------+-----------+----------------------------------------------+
+| joid      | *-lxd     | In the LXD scenarios, nova-lxd does not      |
+|           |           | support qcow2 Images.                        |
+|           |           | https://jira.opnfv.org/browse/YARDSTICK-325  |
++-----------+-----------+----------------------------------------------+
 
 
 Open JIRA tickets
@@ -535,10 +612,8 @@ Open JIRA tickets
 +------------------+-----------------------------------------------+
 |   JIRA           |         Description                           |
 +==================+===============================================+
-+------------------+-----------------------------------------------+
-+------------------+-----------------------------------------------+
-+------------------+-----------------------------------------------+
-+------------------+-----------------------------------------------+
+| `YARDSTICK-325`_ |  Add imge format support for LXD scenario     |
+|                  |                                               |
 +------------------+-----------------------------------------------+
 
 
@@ -559,3 +634,5 @@ Useful links
 
  - Yardstick IRC chanel: #opnfv-yardstick
 
+.. _`YARDSTICK-325` : https://jira.opnfv.org/browse/YARDSTICK-325
+
diff --git a/docs/results/apex-os-odl_l2-nofeature-ha.rst b/docs/results/apex-os-odl_l2-nofeature-ha.rst
deleted file mode 100644
index 1477e2a19..000000000
--- a/docs/results/apex-os-odl_l2-nofeature-ha.rst
+++ /dev/null
@@ -1,106 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-============================================
-Test Results for apex-os-odl_l2-nofeature-ha
-============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Dashboard: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _POD1: https://wiki.opnfv.org/pharos_rls_b_labs
-
-Overview of test results
-------------------------
-
-See Dashboard_ for viewing test result metrics for each respective test case.
-
-All of the test case results below are based on scenario test runs on the
-LF POD1, between February 19 and February 24.
-
-TC002
------
-
-The round-trip-time (RTT) between 2 VMs on different blades is measured using
-ping.
-
-The results for the observed period show minimum 0.37ms, maximum 0.49ms,
-average 0.45ms.
-SLA set to 10 ms, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC005
------
-
-The IO read bandwidth for the observed period show average between 124KB/s and
-129 KB/s, with a minimum 372KB/s and maximum 448KB/s.
-
-SLA set to 400KB/s, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC010
------
-
-The measurements for memory latency for various sizes and strides are shown in
-Dashboard_. For 48MB, the minimum is 22.75 and maximum 30.77 ns.
-
-SLA set to 30 ns, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC011
------
-
-Packet delay variation between 2 VMs on different blades is measured using
-Iperf3.
-
-The mimimum packet delay variation measured is 2.5us and the maximum 8.6us.
-
-TC012
------
-
-See Dashboard_ for results.
-
-SLA set to 15 GB/s, only used as a reference, no value has yet been defined by
-OPNFV.
-
-TC014
------
-
-The Unixbench processor single and parallel speed scores show scores between
-3625 and 3660.
-
-No SLA set.
-
-TC037
------
-
-See Dashboard_ for results.
-
-Detailed test results
----------------------
-
-The scenario was run on LF POD1_ with:
-Apex
-ODL Beryllium
-
-
-Rationale for decisions
------------------------
-
-Pass
-
-Tests were successfully executed and metrics collected.
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-
-Execute tests over a longer period of time, with time reference to versions of
-components, for allowing better understanding of the behavior of the system.
diff --git a/docs/results/apex-os-odl_l2-sfc-ha.rst b/docs/results/apex-os-odl_l2-sfc-ha.rst
deleted file mode 100644
index 9a190cbbf..000000000
--- a/docs/results/apex-os-odl_l2-sfc-ha.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-======================================
-Test Results for apex-os-odl_l2-sfc-ha
-======================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
diff --git a/docs/results/apex-os-odl_l3-nofeature-ha.rst b/docs/results/apex-os-odl_l3-nofeature-ha.rst
deleted file mode 100644
index b9b30c8dc..000000000
--- a/docs/results/apex-os-odl_l3-nofeature-ha.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-============================================
-Test Results for apex-os-odl_l3-nofeature-ha
-============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
diff --git a/docs/results/apex-os-onos-nofeature-ha.rst b/docs/results/apex-os-onos-nofeature-ha.rst
deleted file mode 100644
index 4aa195672..000000000
--- a/docs/results/apex-os-onos-nofeature-ha.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-==========================================
-Test Results for apex-os-onos-nofeature-ha
-==========================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
diff --git a/docs/results/compass-os-nosdn-nofeature-ha.rst b/docs/results/compass-os-nosdn-nofeature-ha.rst
deleted file mode 100644
index bc75a2c10..000000000
--- a/docs/results/compass-os-nosdn-nofeature-ha.rst
+++ /dev/null
@@ -1,133 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-==============================================
-Test Results for compass-os-nosdn-nofeature-ha
-==============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Grafana: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _SC_POD: https://wiki.opnfv.org/pharos?&#community_test_labs
-
-Overview of test results
-------------------------
-
-See Grafana_ for viewing test result metrics for each respective test case. It
-is possible to chose which specific scenarios to look at, and then to zoom in
-on the details of each run test scenario as well.
-
-All of the test case results below are based on 5 consecutive scenario test
-runs, each run on the Huawei SC_POD_ between February 13 and 18 in 2016. The
-best would be to have more runs to draw better conclusions from, but these are
-the only runs available at the time of OPNFV R2 release
-
-TC002
------
-The round-trip-time (RTT) between 2 VMs on different blades is measured using
-ping. The measurements are on average varying between 1.95 and 2.23 ms
-with a first 2 - 3.27 ms RTT spike in the beginning of each run (This could be
-because of normal ARP handling).SLA set to 10 ms. The SLA value is used as a
-reference, it has not been defined by OPNFV.
-
-TC005
------
-The IO read bandwidth look similar between different test runs, with an
-average at approx. 145-162 MB/s. Within each run the results vary much,
-minimum 2MB/s and maximum 712MB/s on the totality.
-SLA set to 400KB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC010
------
-The measurements for memory latency are consistent among test runs and results
-in approx. 1.2 ns. The variations between runs are similar, between
-1.215 and 1.278 ns.  SLA set to 30 ns. The SLA value is used as
-a reference, it has not been defined by OPNFV.
-
-TC011
------
-For this scenario no results are available to report on. Probable reason is
-an integer/floating point issue regarding how InfluxDB is populated with
-result data from the test runs.
-
-TC012
------
-The average measurements for memory bandwidth are consistent among most of the
-different test runs at 12.98 - 16.73 GB/s. The last test run averages at
-16.67 GB/s. Within each run the results vary, with minimal BW of 16.59
-GB/s and maximum of 16.71 GB/s of the totality.
-SLA set to 15 GB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC014
------
-The Unixbench processor single and parallel speed scores show similar results
-at approx. 3000. The runs vary between scores 2499 and 3105.
-No SLA set.
-
-TC027
------
-The round-trip-time (RTT) between VM1 with ipv6 router on different blades is
-measured using ping6. The measurements are consistent at approx. 4 ms.
-SLA set to 30 ms.The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC037
------
-The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
-on different blades are measured when increasing the amount of UDP flows sent
-between the VMs using pktgen as packet generator tool.
-
-Round trip times and packet throughput between VMs are typically affected by
-the amount of flows set up and result in higher RTT and less PPS
-throughput.
-
-When running with less than 10000 flows the results are flat and consistent.
-RTT is then approx. 30 ms and the number of PPS remains flat at approx.
-230000 PPS. Beyond approx. 10000 flows and up to 1000000 (one million) there
-is an even drop in RTT and PPS performance, eventually ending up at approx.
-105-113 ms and 100000 PPS respectively.
-
-TC040
------
-test purpose is to verify the function of Yang-to-Tosca in Parse, and this test
-case is a weekly task, so it was triggered by manually, the result whether the
-output is same with expected outcome is success
-No SLA set.
-
-Detailed test results
----------------------
-
-The scenario was run on Huawei SC_POD_ with:
-Compass 1.0
-OpenStack Liberty
-OVS 2.4.0
-
-No SDN controller installed
-
-Rationale for decisions
------------------------
-Pass
-
-Tests were successfully executed and metrics collects (apart from TC011_).
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-
-The pktgen test configuration has a relatively large base effect on RTT in
-TC037 compared to TC002, where there is no background load at all (30 ms
-compared to 1 ms or less, which is more than a 3000 percentage different
-in RTT results). The larger amounts of flows in TC037 generate worse
-RTT results, in the magnitude of several hundreds of milliseconds. It would
-be interesting to also make and compare all these measurements to completely
-(optimized) bare metal machines running native Linux with all other relevant
-tools available, e.g. lmbench, pktgen etc.
diff --git a/docs/results/compass-os-odl_l2-nofeature-ha.rst b/docs/results/compass-os-odl_l2-nofeature-ha.rst
deleted file mode 100644
index c266b1065..000000000
--- a/docs/results/compass-os-odl_l2-nofeature-ha.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-===============================================
-Test Results for compass-os-odl_l2-nofeature-ha
-===============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Dashboard: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _Sclara: https://wiki.opnfv.org/pharos_rls_b_labs
-
-
-Overview of test results
-------------------------
-
-See Dashboard_ for viewing test result metrics for each respective test case.
-
-All of the test case results below are based on scenario test runs on the
-Huawei Sclara_.
-
-TC002
------
-
-See Dashboard_ for results.
-SLA set to 10 ms, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC005
------
-
-See Dashboard_ for results.
-SLA set to 400KB/s, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC010
------
-
-See Dashboard_ for results.
-SLA set to 30ns, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC011
------
-
-See Dashboard_ for results.
-
-
-TC012
------
-
-See Dashboard_ for results.
-SLA set to 15 GB/s, only used as a reference; no value has yet been defined by
-OPNFV.
-
-
-TC014
------
-
-See Dashboard_ for results.
-No SLA set.
-
-
-TC037
------
-
-See Dashboard_ for results.
-
-
-Detailed test results
----------------------
-
-The scenario was run on Huawei Sclara_ POD with:
-Compass
-ODL Beryllium
-
-Rationale for decisions
------------------------
-
-Pass
-
-Tests were successfully executed and metrics collected.
-No SLA was verified. To be decided on in next release of OPNFV.
-
-
-Conclusions and recommendations
--------------------------------
-
-Execute tests over a longer period of time, with time reference to versions of
-components, for allowing better understanding of the behavior of the system.
diff --git a/docs/results/compass-os-onos-nofeature-ha.rst b/docs/results/compass-os-onos-nofeature-ha.rst
deleted file mode 100644
index 8c90b9873..000000000
--- a/docs/results/compass-os-onos-nofeature-ha.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-=============================================
-Test Results for compass-os-onos-nofeature-ha
-=============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Dashboard: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _Sclara: https://wiki.opnfv.org/pharos_rls_b_labs
-
-
-verview of test results
-------------------------
-
-See Dashboard_ for viewing test result metrics for each respective test case.
-
-All of the test case results below are based on scenario test runs on the
-Huawei Sclara_.
-
-TC002
------
-
-See Dashboard_ for results.
-SLA set to 10 ms, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC005
------
-
-See Dashboard_ for results.
-SLA set to 400KB/s, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC010
------
-
-See Dashboard_ for results.
-SLA set to 30ns, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC011
------
-
-See Dashboard_ for results.
-
-
-TC012
------
-
-See Dashboard_ for results.
-SLA set to 15 GB/s, only used as a reference; no value has yet been defined by
-OPNFV.
-
-
-TC014
------
-
-See Dashboard_ for results.
-No SLA set.
-
-
-TC037
------
-
-See Dashboard_ for results.
-
-
-Detailed test results
----------------------
-
-The scenario was run on Huawei Sclara_ POD with:
-Compass
-ONOS
-
-Rationale for decisions
------------------------
-
-Pass
-
-Tests were successfully executed and metrics collected.
-No SLA was verified. To be decided on in next release of OPNFV.
-
-
-Conclusions and recommendations
--------------------------------
-
-Execute tests over a longer period of time, with time reference to versions of
-components, for allowing better understanding of the behavior of the system.
diff --git a/docs/results/fuel-os-nosdn-nofeature-ha.rst b/docs/results/fuel-os-nosdn-nofeature-ha.rst
deleted file mode 100644
index eb8b14741..000000000
--- a/docs/results/fuel-os-nosdn-nofeature-ha.rst
+++ /dev/null
@@ -1,131 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-===========================================
-Test Results for fuel-os-nosdn-nofeature-ha
-===========================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Grafana: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs
-
-Overview of test results
-------------------------
-
-See Grafana_ for viewing test result metrics for each respective test case. It
-is possible to chose which specific scenarios to look at, and then to zoom in
-on the details of each run test scenario as well.
-
-All of the test case results below are based on 5 consecutive scenario test
-runs, each run on the Ericsson POD2_ between February 13 and 18 in 2016. The
-best would be to have more runs to draw better conclusions from, but these are
-the only runs available at the time of OPNFV R2 release.
-
-TC002
------
-The round-trip-time (RTT) between 2 VMs on different blades is measured using
-ping. The measurements are on average varying between 0.5 and 1.1 ms
-with a first 2 - 2.5 ms RTT spike in the beginning of each run (This could be
-because of normal ARP handling). The 2 last runs are very similar in their
-results. But, to be able to draw any further conclusions more runs should be
-made. There is one measurement taken on February 16 that does not have the
-first RTT spike, and less variations to the RTT. The reason for this is
-unknown. There is a discussion on another test measurement made Feb. 16 in
-TC037_.
-SLA set to 10 ms. The SLA value is used as a reference, it has not
-been defined by OPNFV.
-
-TC005
------
-The IO read bandwidth look similar between different test runs, with an
-average at approx. 160-170 MB/s. Within each run the results vary much,
-minimum 2 MB/s and maximum 630 MB/s on the totality. Most runs have a
-minimum of 3 MB/s (one run at 2 MB/s). The maximum BW varies much more in
-absolute numbers, between 566 and 630 MB/s.
-SLA set to 400 MB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC010
------
-The measurements for memory latency are consistent among test runs and results
-in approx. 1.2 ns. The variations between runs are similar, between
-1.215 and 1.219 ns. One exception is February 16, where the varation is
-greater, between 1.22 and 1.28 ns. SLA set to 30 ns. The SLA value is used as
-a reference, it has not been defined by OPNFV.
-
-TC011
------
-For this scenario no results are available to report on. Probable reason is
-an integer/floating point issue regarding how InfluxDB is populated with
-result data from the test runs.
-
-TC012
------
-The average measurements for memory bandwidth are consistent among most of the
-different test runs at 17.2 - 17.3 GB/s. The very first test run averages at
-17.7 GB/s. Within each run the results vary, with a minimal BW of 15.4
-GB/s and maximum of 18.2 GB/s of the totality.
-SLA set to 15 GB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC014
------
-The Unixbench processor single and parallel speed scores show similar results
-at approx. 3200. The runs vary between scores 3160 and 3240.
-No SLA set.
-
-TC037
------
-The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
-on different blades are measured when increasing the amount of UDP flows sent
-between the VMs using pktgen as packet generator tool.
-
-Round trip times and packet throughput between VMs are typically affected by
-the amount of flows set up and result in higher RTT and less PPS
-throughput.
-
-When running with less than 10000 flows the results are flat and consistent.
-RTT is then approx. 30 ms and the number of PPS remains flat at approx.
-250000 PPS. Beyond approx. 10000 flows and up to 1000000 (one million) there
-is an even drop in RTT and PPS performance, eventually ending up at approx.
-150-250 ms and 40000 PPS respectively.
-
-There is one measurement made February 16 that has slightly worse results
-compared to the other 4 measurements. The reason for this is unknown. For
-instance anyone being logged onto the POD can be of relevance for such a
-disturbance.
-
-Detailed test results
----------------------
-The scenario was run on Ericsson POD2_ with:
-Fuel 8.0
-OpenStack Liberty
-OVS 2.3.1
-
-No SDN controller installed
-
-Rationale for decisions
------------------------
-Pass
-
-Tests were successfully executed and metrics collects (apart from TC011_).
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-The pktgen test configuration has a relatively large base effect on RTT in
-TC037 compared to TC002, where there is no background load at all (30 ms
-compared to 1 ms or less, which is more than a 3000 percentage different
-in RTT results). The larger amounts of flows in TC037 generate worse
-RTT results, in the magnitude of several hundreds of milliseconds. It would
-be interesting to also make and compare all these measurements to completely
-(optimized) bare metal machines running native Linux with all other relevant
-tools available, e.g. lmbench, pktgen etc.
diff --git a/docs/results/fuel-os-nosdn-ovs-ha.rst b/docs/results/fuel-os-nosdn-ovs-ha.rst
deleted file mode 100644
index 9e6e5a458..000000000
--- a/docs/results/fuel-os-nosdn-ovs-ha.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-=====================================
-Test Results for fuel-os-nosdn-ovs-ha
-=====================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
diff --git a/docs/results/fuel-os-onos-nofeature-ha.rst b/docs/results/fuel-os-onos-nofeature-ha.rst
deleted file mode 100644
index 4e7345820..000000000
--- a/docs/results/fuel-os-onos-nofeature-ha.rst
+++ /dev/null
@@ -1,146 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-==========================================
-Test Results for fuel-os-onos-nofeature-ha
-==========================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Grafana: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _POD2: https://wiki.opnfv.org/pharos?&#community_test_labs
-
-Overview of test results
-------------------------
-
-See Grafana_ for viewing test result metrics for each respective test case. It
-is possible to chose which specific scenarios to look at, and then to zoom in
-on the details of each run test scenario as well.
-
-All of the test case results below are based on 7 scenario test
-runs, each run on the Ericsson POD2_ between February 13 and 21 in 2016. Test
-case TC011_ is not reported on due to an InfluxDB issue.
-The best would be to have more runs to draw better conclusions from, but these
-are the only runs available at the time of OPNFV R2 release.
-
-TC002
------
-The round-trip-time (RTT) between 2 VMs on different blades is measured using
-ping. The majority (5) of the test run measurements result in an average
-between 0.4 and 0.5 ms. The other 2 dates stick out with an RTT average of 0.9
-to 1 ms.
-The majority of the runs start with a 1 - 1.5 ms RTT spike (This could be
-because of normal ARP handling). One test run has a greater RTT spike of 4 ms,
-which is the same one with the 1 ms RTT average. The other runs have no similar
-spike at all. To be able to draw conclusions more runs should be made.
-SLA set to 10 ms. The SLA value is used as a reference, it has not
-been defined by OPNFV.
-
-TC005
------
-The IO read bandwidth looks similar between different dates, with an
-average between approx. 170 and 185 MB/s. Within each test run the results
-vary, with a minimum of 2 MB/s and maximum of 690MB/s on the totality. Most
-runs have a minimum BW of 3 MB/s (one run at 2 MB/s). The maximum BW varies
-more in absolute numbers between the dates, between 560 and 690 MB/s.
-SLA set to 400 MB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC010
------
-The measurements for memory latency are similar between test dates and result
-in a little less average than 1.22 ns. The variations within each test run are
-similar, between 1.213 and 1.226 ns. One exception is the first date, where the
-average is 1.223 and varies between 1.215 and 1.275 ns.
-SLA set to 30 ns. The SLA value is used as a reference, it has not been defined
-by OPNFV.
-
-TC011
------
-For this scenario no results are available to report on. Reason is an
-integer/floating point issue regarding how InfluxDB is populated with
-result data from the test runs. The issue was fixed but not in time to produce
-input for this report.
-
-TC012
------
-Between test dates the average measurements for memory bandwidth vary between
-17.1 and 18.1 GB/s. Within each test run the results vary more, with a minimal
-BW of 15.5 GB/s and maximum of 18.2 GB/s on the totality.
-SLA set to 15 GB/s. The SLA value is used as a reference, it has not been
-defined by OPNFV.
-
-TC014
------
-The Unixbench processor test run results vary between scores 3100 and 3260,
-one result each date. The average score on the total is 3170.
-No SLA set.
-
-TC037
------
-The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
-on different blades are measured when increasing the amount of UDP flows sent
-between the VMs using pktgen as packet generator tool.
-
-Round trip times and packet throughput between VMs can typically be affected by
-the amount of flows set up and result in higher RTT and less PPS throughput.
-
-There seems to be mainly two result types. One type a high and flatter
-PPS throughput not very much affected by the number of flows. Here also the
-average RTT is stable around 13 ms throughout all the test runs.
-
-The second type starts with a slightly lower PPS in the beginning than type
-one, and decreases even further when passing approx. 10000 flows. Here also the
-average RTT tends to start at approx. 15 ms ending with an average of 17 to 18
-ms with the maximum amount of flows running.
-
-Result type one can with the maximum amount of flows have a greater PPS than
-the second type with the minimum amount of flows.
-
-For result type one the average PPS throughput in the different runs varies
-between 399000 and 447000 PPS. The total amount of packets in each test run
-is between approx. 7000000 and 10200000 packets.
-The second result type has a PPS average of between 602000 and 621000 PPS and a
-total packet amount between 10900000 and 13500000 packets.
-
-There are lost packets reported in many of the test runs. There is no observed
-correlation between the amount of flows and the amount of lost packets.
-The lost amount of packets normally range between 100 and 1000 per test run,
-but there are spikes in the range of 10000 lost packets as well, and even
-more in a rare cases. Some case is in the range of one million lost packets.
-
-Detailed test results
----------------------
-The scenario was run on Ericsson POD2_ with:
-Fuel 8.0
-OpenStack Liberty
-OpenVirtualSwitch 2.3.1
-OpenNetworkOperatingSystem Drake
-
-Rationale for decisions
------------------------
-Pass
-
-Tests were successfully executed and metrics collected.
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-The pktgen test configuration has a relatively large base effect on RTT in
-TC037 compared to TC002, where there is no background load at all. Approx.
-15 ms compared to approx. 0.5 ms, which is more than a 3000 percentage
-difference in RTT results.
-Especially RTT and throughput come out with better results than for instance
-the *fuel-os-nosdn-nofeature-ha* scenario does. The reason for this should
-probably be further analyzed and understood. Also of interest could be
-to make further analyzes to find patterns and reasons for lost traffic.
-Also of interest could be to see why there are variations in some test cases,
-especially visible in TC037.
-
diff --git a/docs/results/joid-os-nosdn-nofeature-ha.rst b/docs/results/joid-os-nosdn-nofeature-ha.rst
deleted file mode 100644
index 504f635a0..000000000
--- a/docs/results/joid-os-nosdn-nofeature-ha.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-===========================================
-Test Results for joid-os-nosdn-nofeature-ha
-===========================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
diff --git a/docs/results/joid-os-nosdn-nofeature-noha.rst b/docs/results/joid-os-nosdn-nofeature-noha.rst
deleted file mode 100644
index a68a6cd45..000000000
--- a/docs/results/joid-os-nosdn-nofeature-noha.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-=============================================
-Test Results for joid-os-nosdn-nofeature-noha
-=============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
-
diff --git a/docs/results/joid-os-odl_l2-nofeature-ha.rst b/docs/results/joid-os-odl_l2-nofeature-ha.rst
deleted file mode 100644
index ff2890876..000000000
--- a/docs/results/joid-os-odl_l2-nofeature-ha.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-============================================
-Test Results for joid-os-odl_l2-nofeature-ha
-============================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. _Dashboard: http://130.211.154.108/grafana/dashboard/db/yardstick-main
-.. _POD2: https://wiki.opnfv.org/pharos_rls_b_labs
-
-
-Overview of test results
-------------------------
-
-See Dashboard_ for viewing test result metrics for each respective test case.
-
-All of the test case results below are based on scenario test runs on the
-Orange POD2, between February 23 and February 24.
-
-TC002
------
-
-See Dashboard_ for results.
-SLA set to 10 ms, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC005
------
-
-See Dashboard_ for results.
-SLA set to 400KB/s, only used as a reference; no value has yet been defined by
-OPNFV.
-
-TC010
------
-
-Not executed, missing in the test suite used in the POD during the observed
-period.
-
-TC011
------
-
-Not executed, missing in the test suite used in the POD during the observed
-period.
-
-
-TC012
------
-
-Not executed, missing in the test suite used in the POD during the observed
-period.
-
-
-TC014
------
-
-Not executed, missing in the test suite used in the POD during the observed
-period.
-
-
-TC037
------
-
-See Dashboard_ for results.
-
-
-Detailed test results
----------------------
-
-The scenario was run on Orange POD2_ with:
-Joid
-ODL Beryllium
-
-Rationale for decisions
------------------------
-
-Pass
-
-Most tests were successfully executed and metrics collected, the non-execution
-of above-mentioned tests was due to test cases missing in the Jenkins Job used
-in the POD, during the observed period.
-No SLA was verified. To be decided on in next release of OPNFV.
-
-Conclusions and recommendations
--------------------------------
-
-Execute tests over a longer period of time, with time reference to versions of
-components, for allowing better understanding of the behavior of the system.
diff --git a/docs/results/joid-os-onos-nofeature-ha.rst b/docs/results/joid-os-onos-nofeature-ha.rst
deleted file mode 100644
index 13fabc465..000000000
--- a/docs/results/joid-os-onos-nofeature-ha.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-
-
-==========================================
-Test Results for joid-os-onos-nofeature-ha
-==========================================
-
-.. toctree::
-   :maxdepth: 2
-
-
-Details
-=======
-
-.. after this doc is filled, remove all comments and include the scenario in
-.. results.rst by removing the comment on the file name.
-
-
-Overview of test results
-------------------------
-
-.. general on metrics collected, number of iterations
-
-Detailed test results
----------------------
-
-.. info on lab, installer, scenario
-
-Rationale for decisions
------------------------
-.. result analysis, pass/fail
-
-Conclusions and recommendations
--------------------------------
-
-.. did the expected behavior occured?
diff --git a/docs/results/os-odl_l2-nofeature-ha.rst b/docs/results/os-odl_l2-nofeature-ha.rst
index 53b1c11fe..ac0c5bb59 100644
--- a/docs/results/os-odl_l2-nofeature-ha.rst
+++ b/docs/results/os-odl_l2-nofeature-ha.rst
@@ -11,6 +11,238 @@ Test Results for os-odl_l2-nofeature-ha
    :maxdepth: 2
 
 
+apex
+====
+
+.. _Grafana: http://testresults.opnfv.org/grafana/dashboard/db/yardstick-main
+.. _POD1: https://wiki.opnfv.org/pharos?&#community_test_labs
+
+Overview of test results
+------------------------
+
+See Grafana_ for viewing test result metrics for each respective test case. It
+is possible to chose which specific scenarios to look at, and then to zoom in
+on the details of each run test scenario as well.
+
+All of the test case results below are based on 4 scenario test runs, each run
+on the LF POD1_ between September 14 and 17 in 2016.
+
+TC002
+-----
+The round-trip-time (RTT) between 2 VMs on different blades is measured using
+ping. Most test run measurements result on average between 0.49 ms and 0.60 ms.
+Only one test run has reached greatest RTT spike of 0.93 ms. Meanwhile, the
+smallest network latency is 0.33 ms, which is obtained on Sep. 14th.
+SLA set to be 10 ms. The SLA value is used as a reference, it has not been
+defined by OPNFV.
+
+TC005
+-----
+The IO read bandwidth actually refers to the storage throughput, which is
+measured by fio and the greatest IO read bandwidth of the four runs is 416
+MB/s. The IO read bandwidth of all four runs looks similar, with an average
+between 128 and 131 MB/s. One of the runs has a minimum BW of 497 KB/s. The SLA
+of read bandwidth sets to be 400 MB/s, which is used as a reference, and it has
+not been defined by OPNFV.
+
+The results of storage IOPS for the four runs look similar with each other. The
+IO read times per second of the four test runs have an average value at 1k per
+second, and meanwhile, the minimum result is only 45 times per second.
+
+TC010
+-----
+The tool we use to measure memory read latency is lmbench, which is a series of
+micro benchmarks intended to measure basic operating system and hardware system
+metrics. The memory read latency of the four runs is between 1.0859 ns and
+1.0869 ns on average. The variations within each test run are quite different,
+some vary from a large range and others have a small change. For example, the
+largest change is on September 14th, the memory read latency of which is ranging
+from 1.091 ns to 1.086 ns. However.
+The SLA sets to be 30 ns. The SLA value is used as a reference, it has not been
+defined by OPNFV.
+
+TC011
+-----
+Packet delay variation between 2 VMs on different blades is measured using
+Iperf3. On the first two test runs the reported packet delay variation varies between
+0.0037 and 0.0740 ms, with an average delay variation between 0.0096 ms and 0.0321.
+On the second date the delay variation varies between 0.0063 and 0.0096 ms, with
+an average delay variation of 0.0124 - 0.0141 ms.
+
+TC012
+-----
+Lmbench is also used to measure the memory read and write bandwidth, in which
+we use bw_mem to obtain the results. Among the four test runs, the trend of
+three memory bandwidth almost look similar, which all have a narrow range, and
+the average result is 19.88 GB/s. Here SLA set to be 15 GB/s. The SLA value is
+used as a reference, it has not been defined by OPNFV.
+
+TC014
+-----
+The Unixbench is used to evaluate the IaaS processing speed with regards to
+score of single cpu running and parallel running. It can be seen from the
+dashboard that the processing test results vary from scores 3754k to 3831k, and
+there is only one result one date. No SLA set.
+
+TC037
+-----
+The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
+on different blades are measured when increasing the amount of UDP flows sent
+between the VMs using pktgen as packet generator tool.
+
+Round trip times and packet throughput between VMs can typically be affected by
+the amount of flows set up and result in higher RTT and less PPS throughput.
+
+The mean packet throughput of the four test runs is between 307.3 kpps and
+447.1 kpps, of which the result of the third run is the highest. The RTT
+results of all the test runs keep flat at approx. 15 ms. It is obvious that the
+PPS results are not as consistent as the RTT results.
+
+The No. flows of the four test runs are 240 k on average and the PPS results
+look a little waved since the largest packet throughput is 418.1 kpps and the
+minimum throughput is 326.5 kpps respectively.
+
+There are no errors of packets received in the four runs, but there are still
+lost packets in all the test runs. The RTT values obtained by ping of the four
+runs have the similar average vaue, that is approx. 15 ms.
+
+CPU load is measured by mpstat, and CPU load of the four test runs seem a
+little similar, since the minimum value and the peak of CPU load is between 0
+percent and nine percent respectively. And the best result is obtained on Sep.
+1, with an CPU load of nine percent. But on the whole, the CPU load is very
+poor, since the average value is quite small.
+
+TC069
+-----
+With the block size changing from 1 kb to 512 kb, the memory write bandwidth
+tends to become larger first and then smaller within every run test, which
+rangs from 28.2 GB/s to 29.5 GB/s and then to 29.2 GB/s on average. Since the
+test id is one, it is that only the INT memory write bandwidth is tested. On
+the whole, when the block size is 2 kb or 16 kb, the memory write bandwidth
+look similar with a minimal BW of 25.8 GB/s and peak value of 28.3 GB/s. And
+then with the block size becoming larger, the memory write bandwidth tends to
+decrease. SLA sets to be 7 GB/s. The SLA value is used as a reference, it has
+not been defined by OPNFV.
+
+TC070
+-----
+The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
+on different blades are measured when increasing the amount of UDP flows sent
+between the VMs using pktgen as packet generator tool.
+
+Round trip times and packet throughput between VMs can typically be affected by
+the amount of flows set up and result in higher RTT and less PPS throughput.
+
+The network latency is measured by ping, and the results of the four test runs
+look similar with each other, and within these test runs, the maximum RTT can
+reach 39 ms and the average RTT is usually approx. 15 ms. The network latency
+tested on Sep. 1 and Sep. 8 have a peak latency of 39 ms. But on the whole,
+the average RTTs of the five runs keep flat and the network latency is
+relatively short.
+
+Memory utilization is measured by free, which can display amount of free and
+used memory in the system. The largest amount of used memory is 267 MiB for the
+four runs. In general, the four test runs have very large memory utilization,
+which can reach 257 MiB on average. On the other hand, for the mean free memory,
+the four test runs have the similar trend with that of the mean used memory.
+In general, the mean free memory change from 233 MiB to 241 MiB.
+
+Packet throughput and packet loss can be measured by pktgen, which is a tool
+in the network for generating traffic loads for network experiments. The mean
+packet throughput of the four test runs seem quite different, ranging from
+305.3 kpps to 447.1 kpps. The average number of flows in these tests is
+240000, and each run has a minimum number of flows of 2 and a maximum number
+of flows of 1.001 Mil. At the same time, the corresponding average packet
+throughput is between 354.4 kpps and 381.8 kpps. In summary, the PPS results
+seem consistent. Within each test run of the four runs, when number of flows
+becomes larger, the packet throughput seems not larger at the same time.
+
+TC071
+-----
+The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
+on different blades are measured when increasing the amount of UDP flows sent
+between the VMs using pktgen as packet generator tool.
+
+Round trip times and packet throughput between VMs can typically be affected by
+the amount of flows set up and result in higher RTT and less PPS throughput.
+
+The network latency is measured by ping, and the results of the four test runs
+look similar with each other. Within each test run, the maximum RTT is only 42
+ms and the average RTT is usually approx. 15 ms. On the whole, the average
+RTTs of the four runs keep stable and the network latency is relatively small.
+
+Cache utilization is measured by cachestat, which can display size of cache and
+buffer in the system. Cache utilization statistics are collected during UDP
+flows sent between the VMs using pktgen as packet generator tool. The largest
+cache size is 212 MiB, which is same for the four runs, and the smallest cache
+size is 75 MiB. On the whole, the average cache size of the four runs look the
+same and is between 197 MiB and 211 MiB. Meanwhile, the tread of the buffer
+size keep flat, since they have a minimum value of 7 MiB and a maximum value of
+8 MiB, with an average value of about 7.9 MiB.
+
+Packet throughput can be measured by pktgen, which is a tool in the network for
+generating traffic loads for network experiments. The mean packet throughput of
+the four test runs differ from 354.4 kpps to 381.8 kpps. The average number of
+flows in these tests is 240k, and each run has a minimum number of flows of 2
+and a maximum number of flows of 1.001 Mil. At the same time, the corresponding
+packet throughput differ between 305.3 kpps to 447.1 kpps. Within each test run
+of the four runs, when number of flows becomes larger, the packet throughput
+seems not larger in the meantime.
+
+TC072
+-----
+The amount of packets per second (PPS) and round trip times (RTT) between 2 VMs
+on different blades are measured when increasing the amount of UDP flows sent
+between the VMs using pktgen as packet generator tool.
+
+Round trip times and packet throughput between VMs can typically be affected by
+the amount of flows set up and result in higher RTT and less PPS throughput.
+
+The RTT results are similar throughout the different test dates and runs
+between 0 ms and 42 ms with an average leatency of less than 15 ms. The PPS
+results are not as consistent as the RTT results, for the mean packet
+throughput of the four runs differ from 354.4 kpps to 381.8 kpps.
+
+Network utilization is measured by sar, that is system activity reporter, which
+can display the average statistics for the time since the system was started.
+Network utilization statistics are collected during UDP flows sent between the
+VMs using pktgen as packet generator tool. The largest total number of packets
+transmitted per second look similar for three test runs, whose values change a
+lot from 10 pps to 501 kpps. While results of the rest test run seem the same
+and keep stable with the average number of packets transmitted per second of 10
+pps. However, the total number of packets received per second of the four runs
+look similar, which have a large wide range of 2 pps to 815 kpps.
+
+In some test runs when running with less than approx. 251000 flows the PPS
+throughput is normally flatter compared to when running with more flows, after
+which the PPS throughput decreases. For the other test runs there is however no
+significant change to the PPS throughput when the number of flows are
+increased. In some test runs the PPS is also greater with 251000 flows
+compared to other test runs where the PPS result is less with only 2 flows.
+
+There are lost packets reported in most of the test runs. There is no observed
+correlation between the amount of flows and the amount of lost packets.
+The lost amount of packets normally differs a lot per test run.
+
+Detailed test results
+---------------------
+The scenario was run on LF POD1_ with:
+Apex
+OpenStack Mitaka
+OpenVirtualSwitch 2.5.90
+OpenDayLight Beryllium
+
+Rationale for decisions
+-----------------------
+Pass
+
+Conclusions and recommendations
+-------------------------------
+Tests were successfully executed and metrics collected.
+No SLA was verified. To be decided on in next release of OPNFV.
+
+
+
 fuel
 ====
 
@@ -24,9 +256,8 @@ See Grafana_ for viewing test result metrics for each respective test case. It
 is possible to chose which specific scenarios to look at, and then to zoom in
 on the details of each run test scenario as well.
 
-All of the test case results below are based on 4 scenario test
-runs, each run on the Ericsson POD2_ or LF POD2_ between August 25 and 29 in
-2016.
+All of the test case results below are based on 4 scenario test runs, each run
+on the Ericsson POD2_ or LF POD2_ between August 25 and 29 in 2016.
 
 TC002
 -----
@@ -306,7 +537,7 @@ The IO read bandwidth actually refers to the storage throughput, which is
 measured by fio and the greatest IO read bandwidth of the four runs is 183.65
 MB/s. The IO read bandwidth of the three runs looks similar, with an average
 between 62.9 and 64.3 MB/s, except one on Sep. 1, for its maximum storage
-throughput is only 159.1 MB/s. One of the runs has a minimum BW of 685 KM/s and
+throughput is only 159.1 MB/s. One of the runs has a minimum BW of 685 KB/s and
 other has a maximum BW of 183.6 MB/s. The SLA of read bandwidth sets to be
 400 MB/s, which is used as a reference, and it has not been defined by OPNFV.
 
@@ -509,3 +740,4 @@ Conclusions and recommendations
 -------------------------------
 Tests were successfully executed and metrics collected.
 No SLA was verified. To be decided on in next release of OPNFV.
+
diff --git a/docs/results/results.rst b/docs/results/results.rst
index d51704252..d7572e463 100644
--- a/docs/results/results.rst
+++ b/docs/results/results.rst
@@ -23,14 +23,14 @@ OPNFV labs, triggered by OPNFV CI pipeline, documented per scenario.
 .. toctree::
    :maxdepth: 1
 
-   os-odl_l2-nofeature-ha.rst
    os-nosdn-nofeature-ha.rst
-   os-nosdn-kvm-ha.rst
-   os-odl_l2-bgpvpn-ha.rst
    os-nosdn-nofeature-noha.rst
+   os-odl_l2-nofeature-ha.rst
+   os-odl_l2-bgpvpn-ha.rst
+   os-odl_l2-sfc-ha.rst
+   os-nosdn-kvm-ha.rst
    os-onos-nofeature-h.rst
    os-onos-sfc-ha.rst
-   os-odl_l2-sfc-ha.rst
 
 Test results of executed tests are avilable in Dashboard_ and logs in Jenkins_.
 
diff --git a/docs/templates/Yardstick_task_templates.rst b/docs/templates/Yardstick_task_templates.rst
index 8185062b2..c8b6f6e77 100755
--- a/docs/templates/Yardstick_task_templates.rst
+++ b/docs/templates/Yardstick_task_templates.rst
@@ -77,7 +77,7 @@ a JSON or YAML dictionary):
 ::
 
  yardstick task start samples/ping-template.yaml
- --task-args'{"packetsize":"200"}'
+ --task-args '{"packetsize":"200"}'
 
 2.Refer to a file that specifies the argument values (JSON/YAML):