Rename folders in yardstick/docs

Adapt the naming of the folders under yardstick/docs to the naming adopted by
the release documentation defined by opnfvdocs.

JIRA: -

Change-Id: Icc57720d585abbbf7252bcbf76e2f2a403cb1732
Signed-off-by: Ana C <ana.cunha@ericsson.com>
(cherry picked from commit 463a69e878d891b897fe70af15434615baf6a2e9)

2 files changed, 0 insertions, 230 deletions

diff --git a/docs/user_guides/framework/03-installation.rst b/docs/user_guides/framework/03-installation.rst
deleted file mode 100644
index 31f8a922e..000000000
--- a/docs/user_guides/framework/03-installation.rst
+++ /dev/null
@@ -1,221 +0,0 @@
-..
-   TODO As things will change, then this document has to be revised before the
-   next release. Steps:
-   1. Verify that the instructions below are correct and have not been changed.
-   2. Add everything that is currently missing and should be included in this document.
-   3. Make sure each title has a paragraph or an introductory sentence under it.
-   4. Make sure each sentence is grammatically correct and easily understandable.
-   5. Remove this comment section.
-
-Installation
-==============
-
-Yardstick currently supports installation on Ubuntu 14.04 or by using a Docker
-image. Detailed steps about installing Yardstick using both of these options
-can be found below.
-
-To use Yardstick you should have access to an OpenStack environment,
-with at least Nova, Neutron, Glance, Keystone and Heat installed.
-
-The steps needed to run Yardstick are:
-
-1. Install Yardstick and create the test configuration .yaml file.
-2. Build a guest image and load the image into the OpenStack environment.
-3. Create a Neutron external network and load OpenStack environment variables.
-4. Run the test case.
-
-
-Installing Yardstick on Ubuntu 14.04
-------------------------------------
-
-.. _install-framework:
-
-Installing Yardstick framework
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Install dependencies:
-::
-
-  sudo apt-get install python-virtualenv python-dev
-  sudo apt-get install libffi-dev libssl-dev git
-
-Create a python virtual environment, source it and update setuptools:
-::
-
-  virtualenv ~/yardstick_venv
-  source ~/yardstick_venv/bin/activate
-  easy_install -U setuptools
-
-Download source code and install python dependencies:
-::
-
-  git clone https://gerrit.opnfv.org/gerrit/yardstick
-  cd yardstick
-  python setup.py install
-
-There is also a YouTube video, showing the above steps:
-
-.. image:: http://img.youtube.com/vi/4S4izNolmR0/0.jpg
-   :alt: http://www.youtube.com/watch?v=4S4izNolmR0
-   :target: http://www.youtube.com/watch?v=4S4izNolmR0
-
-Installing extra tools
-^^^^^^^^^^^^^^^^^^^^^^
-yardstick-plot
-""""""""""""""
-Yardstick has an internal plotting tool ``yardstick-plot``, which can be installed
-using the following command:
-::
-
-  python setup.py develop easy_install yardstick[plot]
-
-.. _guest-image:
-
-Building a guest image
-^^^^^^^^^^^^^^^^^^^^^^
-Yardstick has a tool for building an Ubuntu Cloud Server image containing all
-the required tools to run test cases supported by Yardstick. It is necessary to
-have sudo rights to use this tool.
-
-This image can be built using the following command while in the directory where
-Yardstick is installed (``~/yardstick`` if the framework is installed
-by following the commands above):
-::
-
-  sudo ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-modify.sh
-
-**Warning:** the script will create files by default in:
-``/tmp/workspace/yardstick`` and the files will be owned by root!
-
-The created image can be added to OpenStack using the ``glance image-create`` or
-via the OpenStack Dashboard.
-
-Example command:
-::
-
-  glance --os-image-api-version 1 image-create \
-  --name yardstick-trusty-server --is-public true \
-  --disk-format qcow2 --container-format bare \
-  --file /tmp/workspace/yardstick/yardstick-trusty-server.img
-
-
-Installing Yardstick using Docker
----------------------------------
-
-Yardstick has two Docker images, first one (**Yardstick-framework**) serves as a
-replacement for installing the Yardstick framework in a virtual environment (for
-example as done in :ref:`install-framework`), while the other image is mostly for
-CI purposes (**Yardstick-CI**).
-
-Yardstick-framework image
-^^^^^^^^^^^^^^^^^^^^^^^^^
-Download the source code:
-
-::
-
-  git clone https://gerrit.opnfv.org/gerrit/yardstick
-
-Build the Docker image and tag it as *yardstick-framework*:
-
-::
-
-  cd yardstick
-  docker build -t yardstick-framework .
-
-Run the Docker instance:
-
-::
-
-  docker run --name yardstick_instance -i -t yardstick-framework
-
-To build a guest image for Yardstick, see :ref:`guest-image`.
-
-Yardstick-CI image
-^^^^^^^^^^^^^^^^^^
-Pull the Yardstick-CI Docker image from Docker hub:
-
-::
-
-  docker pull opnfv/yardstick-ci
-
-Run the Docker image:
-
-::
-
-  docker run \
-   --privileged=true \
-    --rm \
-    -t \
-    -e "INSTALLER_TYPE=${INSTALLER_TYPE}" \
-    -e "INSTALLER_IP=${INSTALLER_IP}" \
-    opnfv/yardstick-ci \
-    run_benchmarks
-
-Where ``${INSTALLER_TYPE}`` can be fuel, foreman or compass and ``${INSTALLER_IP}``
-is the installer master node IP address (i.e. 10.20.0.2 is default for fuel).
-
-Basic steps performed by the **Yardstick-CI** container:
-
-1. clone yardstick and releng repos
-2. setup OS credentials (releng scripts)
-3. install yardstick and dependencies
-4. build yardstick cloud image and upload it to glance
-5. upload cirros-0.3.3 cloud image to glance
-6. run yardstick test scenarios
-7. cleanup
-
-
-OpenStack parameters and credentials
-------------------------------------
-
-Yardstick-flavor
-^^^^^^^^^^^^^^^^
-Most of the sample test cases in Yardstick are using an OpenStack flavor called
-*yardstick-flavor* which deviates from the OpenStack standard m1.tiny flavor by the
-disk size - instead of 1GB it has 3GB. Other parameters are the same as in m1.tiny.
-
-Environment variables
-^^^^^^^^^^^^^^^^^^^^^
-Before running Yardstick it is necessary to export OpenStack environment variables
-from the OpenStack *openrc* file (using the ``source`` command) and export the
-external network name ``export EXTERNAL_NETWORK="external-network-name"``,
-the default name for the external network is ``net04_ext``.
-
-Credential environment variables in the *openrc* file have to include at least:
-
-* OS_AUTH_URL
-* OS_USERNAME
-* OS_PASSWORD
-* OS_TENANT_NAME
-
-Yardstick default key pair
-^^^^^^^^^^^^^^^^^^^^^^^^^^
-Yardstick uses a SSH key pair to connect to the guest image. This key pair can
-be found in the ``resources/files`` directory. To run the ``ping-hot.yaml`` test
-sample, this key pair needs to be imported to the OpenStack environment.
-
-
-Examples and verifying the install
-----------------------------------
-
-It is recommended to verify that Yardstick was installed successfully
-by executing some simple commands and test samples. Below is an example invocation
-of yardstick help command and ping.py test sample:
-::
-
-  yardstick –h
-  yardstick task start samples/ping.yaml
-
-Each testing tool supported by Yardstick has a sample configuration file.
-These configuration files can be found in the **samples** directory.
-
-Example invocation of ``yardstick-plot`` tool:
-::
-
-  yardstick-plot -i /tmp/yardstick.out -o /tmp/plots/
-
-Default location for the output is ``/tmp/yardstick.out``.
-
-More info about the tool can be found by executing:
-::
-
-  yardstick-plot -h
diff --git a/docs/user_guides/framework/index.rst b/docs/user_guides/framework/index.rst
deleted file mode 100644
index f982c30ff..000000000
--- a/docs/user_guides/framework/index.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-=================================
-Yardstick Framework Documentation
-=================================
-
-.. toctree::
-   :numbered:
-   :maxdepth: 2
-
-   03-installation