nsb_installation: updates

JIRA: YARDSTICK-500

Change-Id: I6eef884ef6262abe49fc13bc353ca14a72a5b648
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com>
(cherry picked from commit 97b961aee6653553c5a35ecee5cb766924cd10f1)

1 files changed, 0 insertions, 737 deletions

diff --git a/docs/testing/user/userguide/14-nsb_installation.rst b/docs/testing/user/userguide/14-nsb_installation.rst
deleted file mode 100644
index 39477f476..000000000
--- a/docs/testing/user/userguide/14-nsb_installation.rst
+++ /dev/null
@@ -1,737 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International
-.. License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, 2016-2017 Intel Corporation.
-
-Yardstick - NSB Testing -Installation
-=====================================
-
-Abstract
---------
-
-The Network Service Benchmarking (NSB) extends the yardstick framework to do
-VNF characterization and benchmarking in three different execution
-environments viz., bare metal i.e. native Linux environment, standalone virtual
-environment and managed virtualized environment (e.g. Open stack etc.).
-It also brings in the capability to interact with external traffic generators
-both hardware & software based for triggering and validating the traffic
-according to user defined profiles.
-
-The steps needed to run Yardstick with NSB testing are:
-
-* Install Yardstick (NSB Testing).
-* Setup pod.yaml describing Test topology
-* Create the test configuration yaml file.
-* Run the test case.
-
-
-Prerequisites
--------------
-
-Refer chapter Yardstick Instalaltion for more information on yardstick
-prerequisites
-
-Several prerequisites are needed for Yardstick(VNF testing):
-
-- Python Modules: pyzmq, pika.
-
-- flex
-
-- bison
-
-- build-essential
-
-- automake
-
-- libtool
-
-- librabbitmq-dev
-
-- rabbitmq-server
-
-- collectd
-
-- intel-cmt-cat
-
-Install Yardstick (NSB Testing)
--------------------------------
-
-Using Docker
-------------
-Refer chapter :doc:`04-installation` for more on docker **Install Yardstick using Docker (**recommended**)**
-
-Install directly in Ubuntu
---------------------------
-.. _install-framework:
-
-Alternatively you can install Yardstick framework directly in Ubuntu or in an Ubuntu Docker image. No matter which way you choose to install Yardstick, the following installation steps are identical.
-
-If you choose to use the Ubuntu Docker image, you can pull the Ubuntu
-Docker image from Docker hub::
-
-  docker pull ubuntu:16.04
-
-Install Yardstick
-^^^^^^^^^^^^^^^^^^^^^
-
-Prerequisite preparation::
-
-  apt-get update && apt-get install -y git python-setuptools python-pip
-  easy_install -U setuptools==30.0.0
-  pip install appdirs==1.4.0
-  pip install virtualenv
-
-Create a virtual environment::
-
-  virtualenv ~/yardstick_venv
-  export YARDSTICK_VENV=~/yardstick_venv
-  source ~/yardstick_venv/bin/activate
-
-Download the source code and install Yardstick from it::
-
-  git clone https://gerrit.opnfv.org/gerrit/yardstick
-  export YARDSTICK_REPO_DIR=~/yardstick
-  cd yardstick
-  ./install.sh
-
-
-After *Yardstick* is installed, executing the "nsb_setup.sh" script to setup
-NSB testing::
-
-  ./nsb_setup.sh
-
-It will also automatically download all the packages needed for NSB Testing setup.
-
-System Topology:
------------------
-
-.. code-block:: console
-
-  +----------+              +----------+
-  |          |              |          |
-  |          | (0)----->(0) |          |
-  |    TG1   |              |    DUT   |
-  |          |              |          |
-  |          | (1)<-----(1) |          |
-  +----------+              +----------+
-  trafficgen_1                   vnf
-
-
-Environment parameters and credentials
---------------------------------------
-
-Environment variables
-^^^^^^^^^^^^^^^^^^^^^
-
-Before running Yardstick (NSB Testing) it is necessary to export traffic
-generator libraries.::
-
-    source ~/.bash_profile
-
-Config yardstick conf
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-
-    cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf
-    vi /etc/yardstick/yardstick.conf
-
-Add trex_path, trex_client_lib and bin_path in 'nsb' section.
-
-::
-
-  [DEFAULT]
-  debug = True
-  dispatcher = file, influxdb
-
-  [dispatcher_influxdb]
-  timeout = 5
-  target = http://{YOUR_IP_HERE}:8086
-  db_name = yardstick
-  username = root
-  password = root
-
-  [nsb]
-  trex_path=/opt/nsb_bin/trex/scripts
-  bin_path=/opt/nsb_bin
-  trex_client_lib=/opt/nsb_bin/trex_client/stl
-
-Network Service Benchmarking - Bare-Metal
------------------------------------------
-
-Config pod.yaml describing Topology
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-2-Node setup:
-^^^^^^^^^^^^^
-.. code-block:: console
-  +----------+              +----------+
-  |          |              |          |
-  |          | (0)----->(0) |          |
-  |    TG1   |              |    DUT   |
-  |          |              |          |
-  |          | (n)<-----(n) |          |
-  +----------+              +----------+
-  trafficgen_1                   vnf
-
-3-Node setup - Correlated Traffic
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. code-block:: console
-  +----------+              +----------+            +------------+
-  |          |              |          |            |            |
-  |          |              |          |            |            |
-  |          | (0)----->(0) |          |            |    UDP     |
-  |    TG1   |              |    DUT   |            |   Replay   |
-  |          |              |          |            |            |
-  |          |              |          |(1)<---->(0)|            |
-  +----------+              +----------+            +------------+
-  trafficgen_1                   vnf                 trafficgen_2
-
-Before executing Yardstick test cases, make sure that pod.yaml reflects the
-topology and update all the required fields.::
-
-    cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml
-
-Config pod.yaml
-::
-    nodes:
-    -
-        name: trafficgen_1
-        role: TrafficGen
-        ip: 1.1.1.1
-        user: root
-        password: r00t
-        interfaces:
-            xe0:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.0"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 0
-                local_ip: "152.16.100.20"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:01"
-            xe1:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.1"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 1
-                local_ip: "152.16.40.20"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00.00:00:00:02"
-
-    -
-        name: vnf
-        role: vnf
-        ip: 1.1.1.2
-        user: root
-        password: r00t
-        host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node
-        interfaces:
-            xe0:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.0"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 0
-                local_ip: "152.16.100.19"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:03"
-
-            xe1:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.1"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 1
-                local_ip: "152.16.40.19"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:04"
-        routing_table:
-        - network: "152.16.100.20"
-          netmask: "255.255.255.0"
-          gateway: "152.16.100.20"
-          if: "xe0"
-        - network: "152.16.40.20"
-          netmask: "255.255.255.0"
-          gateway: "152.16.40.20"
-          if: "xe1"
-        nd_route_tbl:
-        - network: "0064:ff9b:0:0:0:0:9810:6414"
-          netmask: "112"
-          gateway: "0064:ff9b:0:0:0:0:9810:6414"
-          if: "xe0"
-        - network: "0064:ff9b:0:0:0:0:9810:2814"
-          netmask: "112"
-          gateway: "0064:ff9b:0:0:0:0:9810:2814"
-          if: "xe1"
-
-Enable yardstick virtual environment
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Before executing yardstick test cases, make sure to activate yardstick
-python virtual environment if runnin on ubuntu without docker::
-
-    source /opt/nsb_bin/yardstick_venv/bin/activate
-
-On docker, virtual env is in main path.
-
-Run Yardstick - Network Service Testcases
------------------------------------------
-
-NS testing - using NSBperf CLI
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-
-  PYTHONPATH: ". ~/.bash_profile"
-  cd <yardstick_repo>/yardstick/cmd
-
- Execute command: ./NSPerf.py -h
-      ./NSBperf.py --vnf <selected vnf> --test <rfc test>
-      eg: ./NSBperf.py --vnf vpe --test tc_baremetal_rfc2544_ipv4_1flow_64B.yaml
-
-NS testing - using yardstick CLI
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-  PYTHONPATH: ". ~/.bash_profile"
-
-Go to test case forlder type we want to execute.
-      e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/
-      run: yardstick --debug task start <test_case.yaml>
-
-Network Service Benchmarking - Standalone Virtualization
---------------------------------------------------------
-
-SRIOV:
------
-
-Pre-requisites
-^^^^^^^^^^^^^^
-
-On Host:
- a) Create a bridge for VM to connect to external network
-    brctl addbr br-int
-    brctl addif br-int <interface_name>    #This interface is connected to internet
-
- b) Build guest image for VNF to run.
-    Most of the sample test cases in Yardstick are using a guest image called
-    ``yardstick-image`` which deviates from an Ubuntu Cloud Server image
-    Yardstick has a tool for building this custom image with samplevnf.
-    It is necessary to have ``sudo`` rights to use this tool.
-
-    Also you may need to install several additional packages to use this tool, by
-    follwing the commands below::
-
-       sudo apt-get update && sudo apt-get install -y qemu-utils kpartx
-
-    This image can be built using the following command in the directory where Yardstick is installed::
-
-       export YARD_IMG_ARCH='amd64'
-       sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers
-       sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
-
-    for more details refer chapter :doc:`04-installation``
-
-Note: VM should be build with static IP and should be accessiable from yardstick host.
-
-Config pod.yaml describing Topology
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-2-Node setup:
-^^^^^^^^^^^^^
-.. code-block:: console
-                               +--------------------+
-                               |                    |
-                               |                    |
-                               |        DUT         |
-                               |       (VNF)        |
-                               |                    |
-                               +--------------------+
-                               | VF NIC |  | VF NIC |
-                               +--------+  +--------+
-                                    ^          ^
-                                    |          |
-                                    |          |
-                               +--------+  +--------+
-                               - PF NIC -  - PF NIC -
-  +----------+               +-------------------------+
-  |          |               |       ^          ^      |
-  |          |               |       |          |      |
-  |          | (0)<----->(0) | ------           |      |
-  |    TG1   |               |           SUT    |      |
-  |          |               |                  |      |
-  |          | (n)<----->(n) |------------------       |
-  +----------+               +-------------------------+
-  trafficgen_1                          host
-
-
-3-Node setup - Correlated Traffic
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. code-block:: console
-
-                               +--------------------+
-                               |                    |
-                               |                    |
-                               |        DUT         |
-                               |       (VNF)        |
-                               |                    |
-                               +--------------------+
-                               | VF NIC |  | VF NIC |
-                               +--------+  +--------+
-                                    ^          ^
-                                    |          |
-                                    |          |
-                               +--------+  +--------+
-                               | PF NIC -  - PF NIC -
-  +----------+               +-------------------------+          +------------+
-  |          |               |       ^          ^      |          |            |
-  |          |               |       |          |      |          |            |
-  |          | (0)<----->(0) | ------           |      |          |    TG2     |
-  |    TG1   |               |           SUT    |      |          |(UDP Replay)|
-  |          |               |                  |      |          |            |
-  |          | (n)<----->(n) |                  ------ |(n)<-->(n)|            |
-  +----------+               +-------------------------+          +------------+
-  trafficgen_1                          host                       trafficgen_2
-
-Before executing Yardstick test cases, make sure that pod.yaml reflects the
-topology and update all the required fields.
-
-::
-
-    cp /etc/yardstick/nodes/pod.yaml.nsb.sriov.sample /etc/yardstick/nodes/pod.yaml
-
-Config pod.yaml
-::
-    nodes:
-    -
-        name: trafficgen_1
-        role: TrafficGen
-        ip: 1.1.1.1
-        user: root
-        password: r00t
-        interfaces:
-            xe0:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.0"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 0
-                local_ip: "152.16.100.20"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:01"
-            xe1:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.1"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 1
-                local_ip: "152.16.40.20"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00.00:00:00:02"
-
--
-    name: sriov
-    role: Sriov
-    ip: 2.2.2.2
-    user: root
-    auth_type: password
-    password: password
-    vf_macs:
-     - "00:00:00:00:00:03"
-     - "00:00:00:00:00:04"
-    phy_ports: # Physical ports to configure sriov
-     - "0000:06:00.0"
-     - "0000:06:00.1"
-    phy_driver:    i40e # kernel driver
-    images: "/var/lib/libvirt/images/ubuntu1.img"
-
-    -
-        name: vnf
-        role: vnf
-        ip: 1.1.1.2
-        user: root
-        password: r00t
-        host: 2.2.2.2 #BM - host == ip, virtualized env - Host - compute node
-        interfaces:
-            xe0:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:00:07.0"
-                driver:    i40evf # default kernel driver
-                dpdk_port_num: 0
-                local_ip: "152.16.100.10"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:03"
-
-            xe1:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:00:08.0"
-                driver:    i40evf # default kernel driver
-                dpdk_port_num: 1
-                local_ip: "152.16.40.10"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:04"
-        routing_table:
-        - network: "152.16.100.10"
-          netmask: "255.255.255.0"
-          gateway: "152.16.100.20"
-          if: "xe0"
-        - network: "152.16.40.10"
-          netmask: "255.255.255.0"
-          gateway: "152.16.40.20"
-          if: "xe1"
-        nd_route_tbl:
-        - network: "0064:ff9b:0:0:0:0:9810:6414"
-          netmask: "112"
-          gateway: "0064:ff9b:0:0:0:0:9810:6414"
-          if: "xe0"
-        - network: "0064:ff9b:0:0:0:0:9810:2814"
-          netmask: "112"
-          gateway: "0064:ff9b:0:0:0:0:9810:2814"
-          if: "xe1"
-
-Enable yardstick virtual environment
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Before executing yardstick test cases, make sure to activate yardstick
-python virtual environment if runnin on ubuntu without docker::
-
-    source /opt/nsb_bin/yardstick_venv/bin/activate
-
-On docker, virtual env is in main path.
-
-Run Yardstick - Network Service Testcases
------------------------------------------
-
-NS testing - using NSBperf CLI
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-
-  PYTHONPATH: ". ~/.bash_profile"
-  cd <yardstick_repo>/yardstick/cmd
-
- Execute command: ./NSPerf.py -h
-      ./NSBperf.py --vnf <selected vnf> --test <rfc test>
-      eg: ./NSBperf.py --vnf vfw --test tc_sriov_rfc2544_ipv4_1flow_64B.yaml
-
-NS testing - using yardstick CLI
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-  PYTHONPATH: ". ~/.bash_profile"
-
-Go to test case forlder type we want to execute.
-      e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/
-      run: yardstick --debug task start <test_case.yaml>
-
-OVS-DPDK:
------
-
-Pre-requisites
-^^^^^^^^^^^^^^
-
-On Host:
- a) Create a bridge for VM to connect to external network
-    brctl addbr br-int
-    brctl addif br-int <interface_name>    #This interface is connected to internet
-
- b) Build guest image for VNF to run.
-    Most of the sample test cases in Yardstick are using a guest image called
-    ``yardstick-image`` which deviates from an Ubuntu Cloud Server image
-    Yardstick has a tool for building this custom image with samplevnf.
-    It is necessary to have ``sudo`` rights to use this tool.
-
-    Also you may need to install several additional packages to use this tool, by
-    follwing the commands below::
-
-       sudo apt-get update && sudo apt-get install -y qemu-utils kpartx
-
-    This image can be built using the following command in the directory where Yardstick is installed::
-
-       export YARD_IMG_ARCH='amd64'
-       sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers
-       sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh
-
-    for more details refer chapter :doc:`04-installation``
-
-Note: VM should be build with static IP and should be accessiable from yardstick host.
-
-  c) OVS & DPDK version.
-     - OVS 2.7 and DPDK 16.11.1 above version is supported
-
-  d) Setup OVS/DPDK on host.
-     Please refer below link on how to setup .. _ovs-dpdk: http://docs.openvswitch.org/en/latest/intro/install/dpdk/
-
-Config pod.yaml describing Topology
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-2-Node setup:
-^^^^^^^^^^^^^
-.. code-block:: console
-                               +--------------------+
-                               |                    |
-                               |                    |
-                               |        DUT         |
-                               |       (VNF)        |
-                               |                    |
-                               +--------------------+
-                               | virtio |  | virtio |
-                               +--------+  +--------+
-                                    ^          ^
-                                    |          |
-                                    |          |
-                               +--------+  +--------+
-                               | vHOST0 |  | vHOST1 |
-  +----------+               +-------------------------+
-  |          |               |       ^          ^      |
-  |          |               |       |          |      |
-  |          | (0)<----->(0) | ------           |      |
-  |    TG1   |               |          SUT     |      |
-  |          |               |       (ovs-dpdk) |      |
-  |          | (n)<----->(n) |------------------       |
-  +----------+               +-------------------------+
-  trafficgen_1                          host
-
-
-3-Node setup - Correlated Traffic
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-.. code-block:: console
-
-                               +--------------------+
-                               |                    |
-                               |                    |
-                               |        DUT         |
-                               |       (VNF)        |
-                               |                    |
-                               +--------------------+
-                               | virtio |  | virtio |
-                               +--------+  +--------+
-                                    ^          ^
-                                    |          |
-                                    |          |
-                               +--------+  +--------+
-                               | vHOST0 |  | vHOST1 |
-  +----------+               +-------------------------+          +------------+
-  |          |               |       ^          ^      |          |            |
-  |          |               |       |          |      |          |            |
-  |          | (0)<----->(0) | ------           |      |          |    TG2     |
-  |    TG1   |               |          SUT     |      |          |(UDP Replay)|
-  |          |               |      (ovs-dpdk)  |      |          |            |
-  |          | (n)<----->(n) |                  ------ |(n)<-->(n)|            |
-  +----------+               +-------------------------+          +------------+
-  trafficgen_1                          host                       trafficgen_2
-
-
-Before executing Yardstick test cases, make sure that pod.yaml reflects the
-topology and update all the required fields.::
-
-    cp /etc/yardstick/nodes/pod.yaml.nsb.ovs.sample /etc/yardstick/nodes/pod.yaml
-
-Config pod.yaml
-::
-    nodes:
-    -
-        name: trafficgen_1
-        role: TrafficGen
-        ip: 1.1.1.1
-        user: root
-        password: r00t
-        interfaces:
-            xe0:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.0"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 0
-                local_ip: "152.16.100.20"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:01"
-            xe1:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:07:00.1"
-                driver:    i40e # default kernel driver
-                dpdk_port_num: 1
-                local_ip: "152.16.40.20"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00.00:00:00:02"
-
--
-    name: ovs
-    role: Ovsdpdk
-    ip: 2.2.2.2
-    user: root
-    auth_type: password
-    password: <password>
-    vpath: "/usr/local/"
-    vports:
-     - dpdkvhostuser0
-     - dpdkvhostuser1
-    vports_mac:
-     - "00:00:00:00:00:03"
-     - "00:00:00:00:00:04"
-    phy_ports: # Physical ports to configure ovs
-     - "0000:06:00.0"
-     - "0000:06:00.1"
-    flow:
-     - ovs-ofctl add-flow br0 in_port=1,action=output:3
-     - ovs-ofctl add-flow br0 in_port=3,action=output:1
-     - ovs-ofctl add-flow br0 in_port=4,action=output:2
-     - ovs-ofctl add-flow br0 in_port=2,action=output:4
-    phy_driver:    i40e # kernel driver
-    images: "/var/lib/libvirt/images/ubuntu1.img"
-
-    -
-        name: vnf
-        role: vnf
-        ip: 1.1.1.2
-        user: root
-        password: r00t
-        host: 2.2.2.2 #BM - host == ip, virtualized env - Host - compute node
-        interfaces:
-            xe0:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:00:04.0"
-                driver:    virtio-pci # default kernel driver
-                dpdk_port_num: 0
-                local_ip: "152.16.100.10"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:03"
-
-            xe1:  # logical name from topology.yaml and vnfd.yaml
-                vpci:      "0000:00:05.0"
-                driver:    virtio-pci # default kernel driver
-                dpdk_port_num: 1
-                local_ip: "152.16.40.10"
-                netmask:   "255.255.255.0"
-                local_mac: "00:00:00:00:00:04"
-        routing_table:
-        - network: "152.16.100.10"
-          netmask: "255.255.255.0"
-          gateway: "152.16.100.20"
-          if: "xe0"
-        - network: "152.16.40.10"
-          netmask: "255.255.255.0"
-          gateway: "152.16.40.20"
-          if: "xe1"
-        nd_route_tbl:
-        - network: "0064:ff9b:0:0:0:0:9810:6414"
-          netmask: "112"
-          gateway: "0064:ff9b:0:0:0:0:9810:6414"
-          if: "xe0"
-        - network: "0064:ff9b:0:0:0:0:9810:2814"
-          netmask: "112"
-          gateway: "0064:ff9b:0:0:0:0:9810:2814"
-          if: "xe1"
-
-Enable yardstick virtual environment
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Before executing yardstick test cases, make sure to activate yardstick
-python virtual environment if runnin on ubuntu without docker::
-
-    source /opt/nsb_bin/yardstick_venv/bin/activate
-
-On docker, virtual env is in main path.
-
-Run Yardstick - Network Service Testcases
------------------------------------------
-
-NS testing - using NSBperf CLI
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-
-  PYTHONPATH: ". ~/.bash_profile"
-  cd <yardstick_repo>/yardstick/cmd
-
- Execute command: ./NSPerf.py -h
-      ./NSBperf.py --vnf <selected vnf> --test <rfc test>
-      eg: ./NSBperf.py --vnf vfw --test tc_ovs_rfc2544_ipv4_1flow_64B.yaml
-
-NS testing - using yardstick CLI
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-::
-  PYTHONPATH: ". ~/.bash_profile"
-
-Go to test case forlder type we want to execute.
-      e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/
-      run: yardstick --debug task start <test_case.yaml>