diff options
author | 2017-10-17 14:38:39 -0700 | |
---|---|---|
committer | 2017-10-20 01:29:18 +0000 | |
commit | ef94db1ccc5778613c231717906d0f6a2f481581 (patch) | |
tree | 60441d9d51a9b0178fd68223eeeef57dc5ed3f60 /docs/testing/user/userguide/14-nsb_installation.rst | |
parent | 0cb9f11bb40d30d70632a7c2b1ca10a8f9f2d329 (diff) |
nsb_installation: updates
JIRA: YARDSTICK-500
Change-Id: I6eef884ef6262abe49fc13bc353ca14a72a5b648
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Martin Banszel <martinx.banszel@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Maciej Skrocki <maciej.skrocki@intel.com>
(cherry picked from commit 97b961aee6653553c5a35ecee5cb766924cd10f1)
Diffstat (limited to 'docs/testing/user/userguide/14-nsb_installation.rst')
-rw-r--r-- | docs/testing/user/userguide/14-nsb_installation.rst | 737 |
1 files changed, 0 insertions, 737 deletions
diff --git a/docs/testing/user/userguide/14-nsb_installation.rst b/docs/testing/user/userguide/14-nsb_installation.rst deleted file mode 100644 index 39477f476..000000000 --- a/docs/testing/user/userguide/14-nsb_installation.rst +++ /dev/null @@ -1,737 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, 2016-2017 Intel Corporation. - -Yardstick - NSB Testing -Installation -===================================== - -Abstract --------- - -The Network Service Benchmarking (NSB) extends the yardstick framework to do -VNF characterization and benchmarking in three different execution -environments viz., bare metal i.e. native Linux environment, standalone virtual -environment and managed virtualized environment (e.g. Open stack etc.). -It also brings in the capability to interact with external traffic generators -both hardware & software based for triggering and validating the traffic -according to user defined profiles. - -The steps needed to run Yardstick with NSB testing are: - -* Install Yardstick (NSB Testing). -* Setup pod.yaml describing Test topology -* Create the test configuration yaml file. -* Run the test case. - - -Prerequisites -------------- - -Refer chapter Yardstick Instalaltion for more information on yardstick -prerequisites - -Several prerequisites are needed for Yardstick(VNF testing): - -- Python Modules: pyzmq, pika. - -- flex - -- bison - -- build-essential - -- automake - -- libtool - -- librabbitmq-dev - -- rabbitmq-server - -- collectd - -- intel-cmt-cat - -Install Yardstick (NSB Testing) -------------------------------- - -Using Docker ------------- -Refer chapter :doc:`04-installation` for more on docker **Install Yardstick using Docker (**recommended**)** - -Install directly in Ubuntu --------------------------- -.. _install-framework: - -Alternatively you can install Yardstick framework directly in Ubuntu or in an Ubuntu Docker image. No matter which way you choose to install Yardstick, the following installation steps are identical. - -If you choose to use the Ubuntu Docker image, you can pull the Ubuntu -Docker image from Docker hub:: - - docker pull ubuntu:16.04 - -Install Yardstick -^^^^^^^^^^^^^^^^^^^^^ - -Prerequisite preparation:: - - apt-get update && apt-get install -y git python-setuptools python-pip - easy_install -U setuptools==30.0.0 - pip install appdirs==1.4.0 - pip install virtualenv - -Create a virtual environment:: - - virtualenv ~/yardstick_venv - export YARDSTICK_VENV=~/yardstick_venv - source ~/yardstick_venv/bin/activate - -Download the source code and install Yardstick from it:: - - git clone https://gerrit.opnfv.org/gerrit/yardstick - export YARDSTICK_REPO_DIR=~/yardstick - cd yardstick - ./install.sh - - -After *Yardstick* is installed, executing the "nsb_setup.sh" script to setup -NSB testing:: - - ./nsb_setup.sh - -It will also automatically download all the packages needed for NSB Testing setup. - -System Topology: ------------------ - -.. code-block:: console - - +----------+ +----------+ - | | | | - | | (0)----->(0) | | - | TG1 | | DUT | - | | | | - | | (1)<-----(1) | | - +----------+ +----------+ - trafficgen_1 vnf - - -Environment parameters and credentials --------------------------------------- - -Environment variables -^^^^^^^^^^^^^^^^^^^^^ - -Before running Yardstick (NSB Testing) it is necessary to export traffic -generator libraries.:: - - source ~/.bash_profile - -Config yardstick conf -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf - vi /etc/yardstick/yardstick.conf - -Add trex_path, trex_client_lib and bin_path in 'nsb' section. - -:: - - [DEFAULT] - debug = True - dispatcher = file, influxdb - - [dispatcher_influxdb] - timeout = 5 - target = http://{YOUR_IP_HERE}:8086 - db_name = yardstick - username = root - password = root - - [nsb] - trex_path=/opt/nsb_bin/trex/scripts - bin_path=/opt/nsb_bin - trex_client_lib=/opt/nsb_bin/trex_client/stl - -Network Service Benchmarking - Bare-Metal ------------------------------------------ - -Config pod.yaml describing Topology -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -2-Node setup: -^^^^^^^^^^^^^ -.. code-block:: console - +----------+ +----------+ - | | | | - | | (0)----->(0) | | - | TG1 | | DUT | - | | | | - | | (n)<-----(n) | | - +----------+ +----------+ - trafficgen_1 vnf - -3-Node setup - Correlated Traffic -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -.. code-block:: console - +----------+ +----------+ +------------+ - | | | | | | - | | | | | | - | | (0)----->(0) | | | UDP | - | TG1 | | DUT | | Replay | - | | | | | | - | | | |(1)<---->(0)| | - +----------+ +----------+ +------------+ - trafficgen_1 vnf trafficgen_2 - -Before executing Yardstick test cases, make sure that pod.yaml reflects the -topology and update all the required fields.:: - - cp /etc/yardstick/nodes/pod.yaml.nsb.sample /etc/yardstick/nodes/pod.yaml - -Config pod.yaml -:: - nodes: - - - name: trafficgen_1 - role: TrafficGen - ip: 1.1.1.1 - user: root - password: r00t - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:01" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.20" - netmask: "255.255.255.0" - local_mac: "00:00.00:00:00:02" - - - - name: vnf - role: vnf - ip: 1.1.1.2 - user: root - password: r00t - host: 1.1.1.2 #BM - host == ip, virtualized env - Host - compute node - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.19" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:03" - - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.19" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:04" - routing_table: - - network: "152.16.100.20" - netmask: "255.255.255.0" - gateway: "152.16.100.20" - if: "xe0" - - network: "152.16.40.20" - netmask: "255.255.255.0" - gateway: "152.16.40.20" - if: "xe1" - nd_route_tbl: - - network: "0064:ff9b:0:0:0:0:9810:6414" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:6414" - if: "xe0" - - network: "0064:ff9b:0:0:0:0:9810:2814" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:2814" - if: "xe1" - -Enable yardstick virtual environment -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing yardstick test cases, make sure to activate yardstick -python virtual environment if runnin on ubuntu without docker:: - - source /opt/nsb_bin/yardstick_venv/bin/activate - -On docker, virtual env is in main path. - -Run Yardstick - Network Service Testcases ------------------------------------------ - -NS testing - using NSBperf CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - PYTHONPATH: ". ~/.bash_profile" - cd <yardstick_repo>/yardstick/cmd - - Execute command: ./NSPerf.py -h - ./NSBperf.py --vnf <selected vnf> --test <rfc test> - eg: ./NSBperf.py --vnf vpe --test tc_baremetal_rfc2544_ipv4_1flow_64B.yaml - -NS testing - using yardstick CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - PYTHONPATH: ". ~/.bash_profile" - -Go to test case forlder type we want to execute. - e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/ - run: yardstick --debug task start <test_case.yaml> - -Network Service Benchmarking - Standalone Virtualization --------------------------------------------------------- - -SRIOV: ------ - -Pre-requisites -^^^^^^^^^^^^^^ - -On Host: - a) Create a bridge for VM to connect to external network - brctl addbr br-int - brctl addif br-int <interface_name> #This interface is connected to internet - - b) Build guest image for VNF to run. - Most of the sample test cases in Yardstick are using a guest image called - ``yardstick-image`` which deviates from an Ubuntu Cloud Server image - Yardstick has a tool for building this custom image with samplevnf. - It is necessary to have ``sudo`` rights to use this tool. - - Also you may need to install several additional packages to use this tool, by - follwing the commands below:: - - sudo apt-get update && sudo apt-get install -y qemu-utils kpartx - - This image can be built using the following command in the directory where Yardstick is installed:: - - export YARD_IMG_ARCH='amd64' - sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers - sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh - - for more details refer chapter :doc:`04-installation`` - -Note: VM should be build with static IP and should be accessiable from yardstick host. - -Config pod.yaml describing Topology -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -2-Node setup: -^^^^^^^^^^^^^ -.. code-block:: console - +--------------------+ - | | - | | - | DUT | - | (VNF) | - | | - +--------------------+ - | VF NIC | | VF NIC | - +--------+ +--------+ - ^ ^ - | | - | | - +--------+ +--------+ - - PF NIC - - PF NIC - - +----------+ +-------------------------+ - | | | ^ ^ | - | | | | | | - | | (0)<----->(0) | ------ | | - | TG1 | | SUT | | - | | | | | - | | (n)<----->(n) |------------------ | - +----------+ +-------------------------+ - trafficgen_1 host - - -3-Node setup - Correlated Traffic -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -.. code-block:: console - - +--------------------+ - | | - | | - | DUT | - | (VNF) | - | | - +--------------------+ - | VF NIC | | VF NIC | - +--------+ +--------+ - ^ ^ - | | - | | - +--------+ +--------+ - | PF NIC - - PF NIC - - +----------+ +-------------------------+ +------------+ - | | | ^ ^ | | | - | | | | | | | | - | | (0)<----->(0) | ------ | | | TG2 | - | TG1 | | SUT | | |(UDP Replay)| - | | | | | | | - | | (n)<----->(n) | ------ |(n)<-->(n)| | - +----------+ +-------------------------+ +------------+ - trafficgen_1 host trafficgen_2 - -Before executing Yardstick test cases, make sure that pod.yaml reflects the -topology and update all the required fields. - -:: - - cp /etc/yardstick/nodes/pod.yaml.nsb.sriov.sample /etc/yardstick/nodes/pod.yaml - -Config pod.yaml -:: - nodes: - - - name: trafficgen_1 - role: TrafficGen - ip: 1.1.1.1 - user: root - password: r00t - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:01" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.20" - netmask: "255.255.255.0" - local_mac: "00:00.00:00:00:02" - -- - name: sriov - role: Sriov - ip: 2.2.2.2 - user: root - auth_type: password - password: password - vf_macs: - - "00:00:00:00:00:03" - - "00:00:00:00:00:04" - phy_ports: # Physical ports to configure sriov - - "0000:06:00.0" - - "0000:06:00.1" - phy_driver: i40e # kernel driver - images: "/var/lib/libvirt/images/ubuntu1.img" - - - - name: vnf - role: vnf - ip: 1.1.1.2 - user: root - password: r00t - host: 2.2.2.2 #BM - host == ip, virtualized env - Host - compute node - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:00:07.0" - driver: i40evf # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.10" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:03" - - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:00:08.0" - driver: i40evf # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.10" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:04" - routing_table: - - network: "152.16.100.10" - netmask: "255.255.255.0" - gateway: "152.16.100.20" - if: "xe0" - - network: "152.16.40.10" - netmask: "255.255.255.0" - gateway: "152.16.40.20" - if: "xe1" - nd_route_tbl: - - network: "0064:ff9b:0:0:0:0:9810:6414" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:6414" - if: "xe0" - - network: "0064:ff9b:0:0:0:0:9810:2814" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:2814" - if: "xe1" - -Enable yardstick virtual environment -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing yardstick test cases, make sure to activate yardstick -python virtual environment if runnin on ubuntu without docker:: - - source /opt/nsb_bin/yardstick_venv/bin/activate - -On docker, virtual env is in main path. - -Run Yardstick - Network Service Testcases ------------------------------------------ - -NS testing - using NSBperf CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - PYTHONPATH: ". ~/.bash_profile" - cd <yardstick_repo>/yardstick/cmd - - Execute command: ./NSPerf.py -h - ./NSBperf.py --vnf <selected vnf> --test <rfc test> - eg: ./NSBperf.py --vnf vfw --test tc_sriov_rfc2544_ipv4_1flow_64B.yaml - -NS testing - using yardstick CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - PYTHONPATH: ". ~/.bash_profile" - -Go to test case forlder type we want to execute. - e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/ - run: yardstick --debug task start <test_case.yaml> - -OVS-DPDK: ------ - -Pre-requisites -^^^^^^^^^^^^^^ - -On Host: - a) Create a bridge for VM to connect to external network - brctl addbr br-int - brctl addif br-int <interface_name> #This interface is connected to internet - - b) Build guest image for VNF to run. - Most of the sample test cases in Yardstick are using a guest image called - ``yardstick-image`` which deviates from an Ubuntu Cloud Server image - Yardstick has a tool for building this custom image with samplevnf. - It is necessary to have ``sudo`` rights to use this tool. - - Also you may need to install several additional packages to use this tool, by - follwing the commands below:: - - sudo apt-get update && sudo apt-get install -y qemu-utils kpartx - - This image can be built using the following command in the directory where Yardstick is installed:: - - export YARD_IMG_ARCH='amd64' - sudo echo "Defaults env_keep += \'YARD_IMG_ARCH\'" >> /etc/sudoers - sudo tools/yardstick-img-dpdk-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh - - for more details refer chapter :doc:`04-installation`` - -Note: VM should be build with static IP and should be accessiable from yardstick host. - - c) OVS & DPDK version. - - OVS 2.7 and DPDK 16.11.1 above version is supported - - d) Setup OVS/DPDK on host. - Please refer below link on how to setup .. _ovs-dpdk: http://docs.openvswitch.org/en/latest/intro/install/dpdk/ - -Config pod.yaml describing Topology -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -2-Node setup: -^^^^^^^^^^^^^ -.. code-block:: console - +--------------------+ - | | - | | - | DUT | - | (VNF) | - | | - +--------------------+ - | virtio | | virtio | - +--------+ +--------+ - ^ ^ - | | - | | - +--------+ +--------+ - | vHOST0 | | vHOST1 | - +----------+ +-------------------------+ - | | | ^ ^ | - | | | | | | - | | (0)<----->(0) | ------ | | - | TG1 | | SUT | | - | | | (ovs-dpdk) | | - | | (n)<----->(n) |------------------ | - +----------+ +-------------------------+ - trafficgen_1 host - - -3-Node setup - Correlated Traffic -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -.. code-block:: console - - +--------------------+ - | | - | | - | DUT | - | (VNF) | - | | - +--------------------+ - | virtio | | virtio | - +--------+ +--------+ - ^ ^ - | | - | | - +--------+ +--------+ - | vHOST0 | | vHOST1 | - +----------+ +-------------------------+ +------------+ - | | | ^ ^ | | | - | | | | | | | | - | | (0)<----->(0) | ------ | | | TG2 | - | TG1 | | SUT | | |(UDP Replay)| - | | | (ovs-dpdk) | | | | - | | (n)<----->(n) | ------ |(n)<-->(n)| | - +----------+ +-------------------------+ +------------+ - trafficgen_1 host trafficgen_2 - - -Before executing Yardstick test cases, make sure that pod.yaml reflects the -topology and update all the required fields.:: - - cp /etc/yardstick/nodes/pod.yaml.nsb.ovs.sample /etc/yardstick/nodes/pod.yaml - -Config pod.yaml -:: - nodes: - - - name: trafficgen_1 - role: TrafficGen - ip: 1.1.1.1 - user: root - password: r00t - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.0" - driver: i40e # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.20" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:01" - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:07:00.1" - driver: i40e # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.20" - netmask: "255.255.255.0" - local_mac: "00:00.00:00:00:02" - -- - name: ovs - role: Ovsdpdk - ip: 2.2.2.2 - user: root - auth_type: password - password: <password> - vpath: "/usr/local/" - vports: - - dpdkvhostuser0 - - dpdkvhostuser1 - vports_mac: - - "00:00:00:00:00:03" - - "00:00:00:00:00:04" - phy_ports: # Physical ports to configure ovs - - "0000:06:00.0" - - "0000:06:00.1" - flow: - - ovs-ofctl add-flow br0 in_port=1,action=output:3 - - ovs-ofctl add-flow br0 in_port=3,action=output:1 - - ovs-ofctl add-flow br0 in_port=4,action=output:2 - - ovs-ofctl add-flow br0 in_port=2,action=output:4 - phy_driver: i40e # kernel driver - images: "/var/lib/libvirt/images/ubuntu1.img" - - - - name: vnf - role: vnf - ip: 1.1.1.2 - user: root - password: r00t - host: 2.2.2.2 #BM - host == ip, virtualized env - Host - compute node - interfaces: - xe0: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:00:04.0" - driver: virtio-pci # default kernel driver - dpdk_port_num: 0 - local_ip: "152.16.100.10" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:03" - - xe1: # logical name from topology.yaml and vnfd.yaml - vpci: "0000:00:05.0" - driver: virtio-pci # default kernel driver - dpdk_port_num: 1 - local_ip: "152.16.40.10" - netmask: "255.255.255.0" - local_mac: "00:00:00:00:00:04" - routing_table: - - network: "152.16.100.10" - netmask: "255.255.255.0" - gateway: "152.16.100.20" - if: "xe0" - - network: "152.16.40.10" - netmask: "255.255.255.0" - gateway: "152.16.40.20" - if: "xe1" - nd_route_tbl: - - network: "0064:ff9b:0:0:0:0:9810:6414" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:6414" - if: "xe0" - - network: "0064:ff9b:0:0:0:0:9810:2814" - netmask: "112" - gateway: "0064:ff9b:0:0:0:0:9810:2814" - if: "xe1" - -Enable yardstick virtual environment -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Before executing yardstick test cases, make sure to activate yardstick -python virtual environment if runnin on ubuntu without docker:: - - source /opt/nsb_bin/yardstick_venv/bin/activate - -On docker, virtual env is in main path. - -Run Yardstick - Network Service Testcases ------------------------------------------ - -NS testing - using NSBperf CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - - PYTHONPATH: ". ~/.bash_profile" - cd <yardstick_repo>/yardstick/cmd - - Execute command: ./NSPerf.py -h - ./NSBperf.py --vnf <selected vnf> --test <rfc test> - eg: ./NSBperf.py --vnf vfw --test tc_ovs_rfc2544_ipv4_1flow_64B.yaml - -NS testing - using yardstick CLI -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -:: - PYTHONPATH: ". ~/.bash_profile" - -Go to test case forlder type we want to execute. - e.g. <yardstick repo>/samples/vnf_samples/nsut/<vnf>/ - run: yardstick --debug task start <test_case.yaml> |